| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull arm byte cmpxchg from Paul McKenney:
"ARM: Provide one-byte cmpxchg emulation
This provides emulated one-byte cmpxchg() support for ARM using the
cmpxchg_emu_u8() function that uses a four-byte cmpxchg() to emulate
the one-byte variant.
Similar patches for emulation of one-byte cmpxchg() for arc, sh, and
xtensa have not yet received maintainer acks, so they are slated for
the v6.12 merge window"
* tag 'cmpxchg.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
ARM: Emulate one-byte cmpxchg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and related functionality:
Core:
- Make the takeover of a hrtimer based broadcast timer reliable
during CPU hot-unplug. The current implementation suffers from a
race which can lead to broadcast timer starvation in the worst
case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
PTP:
- Replace the architecture specific base clock to clocksource, e.g.
ART to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place"
* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: timer: Add SOPHGO SG2002 clint
dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
dt-bindings: timer: renesas,tmu: Add RZ/G1 support
dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
clocksource/drivers/mips-gic-timer: Correct sched_clock width
clocksource/drivers/mips-gic-timer: Refine rating computation
clocksource/drivers/sh_cmt: Address race condition for clock events
clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
tick/broadcast: Make takeover of broadcast hrtimer reliable
tick/sched: Combine WARN_ON_ONCE and print_once
x86/vdso: Remove unused include
x86/vgtod: Remove unused typedef gtod_long_t
x86/vdso: Fix function reference in comment
vdso: Add comment about reason for vdso struct ordering
vdso/gettimeofday: Clarify comment about open coded function
timekeeping: Add missing kernel-doc function comments
tick: Remove unnused tick_nohz_get_idle_calls()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"A small set of SMP/CPU hotplug updates:
- Reverse the order of iteration when freezing secondary CPUs for
hibernation.
This avoids that drivers like the Intel uncore performance counter
have to transfer the assignement of handling the per package uncore
events for every CPU in a package, which is a considerable speedup
on larger systems.
- Add a missing destroy_work_on_stack() invocation in
smp_call_on_cpu() to prevent debug objects to emit a false positive
warning when the stack is freed.
- Small cleanups in comments and a str_plural() conversion"
* tag 'smp-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Add missing destroy_work_on_stack() call in smp_call_on_cpu()
cpu/hotplug: Reverse order of iteration in freeze_secondary_cpus()
smp: Use str_plural() to fix Coccinelle warnings
cpu/hotplug: Fix typo in comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects update from Thomas Gleixner:
"A single update for debugobjects to annotate all intentionally racy
global debug variables so that KCSAN ignores them"
* tag 'core-debugobjects-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Annotate racy debug variables
|
|
Fixes the warning:
Function parameter or struct member 'bb_from_dmub' not described in 'amdgpu_display_manager'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Increase the KMS minor version to indicate GFX12 DCC support since this
contains a major change in how DCC is managed across IPs like GFX, DCN
etc. This will be used mainly by userspace like Mesa to figure out
DCC support on GFX12 hardware.
v2: fix version number (Alex)
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
Prepare input updates for 6.11 merge window.
|
|
Pull io_uring updates from Jens Axboe:
"Here are the io_uring updates queued up for 6.11.
Nothing major this time around, various minor improvements and
cleanups/fixes. This contains:
- Add bind/listen opcodes. Main motivation is to support direct
descriptors, to avoid needing a regular fd just for doing these two
operations (Gabriel)
- Probe fixes (Gabriel)
- Treat io-wq work flags as atomics. Not fixing a real issue, but may
as well and it silences a KCSAN warning (me)
- Cleanup of rsrc __set_current_state() usage (me)
- Add 64-bit for {m,f}advise operations (me)
- Improve performance of data ring messages (me)
- Fix for ring message overflow posting (Pavel)
- Fix for freezer interaction with TWA_NOTIFY_SIGNAL. Not strictly an
io_uring thing, but since TWA_NOTIFY_SIGNAL was originally added
for faster task_work signaling for io_uring, bundling it with this
pull (Pavel)
- Add Pavel as a co-maintainer
- Various cleanups (me, Thorsten)"
* tag 'for-6.11/io_uring-20240714' of git://git.kernel.dk/linux: (28 commits)
io_uring/net: check socket is valid in io_bind()/io_listen()
kernel: rerun task_work while freezing in get_signal()
io_uring/io-wq: limit retrying worker initialisation
io_uring/napi: Remove unnecessary s64 cast
io_uring/net: cleanup io_recv_finish() bundle handling
io_uring/msg_ring: fix overflow posting
MAINTAINERS: change Pavel Begunkov from io_uring reviewer to maintainer
io_uring/msg_ring: use kmem_cache_free() to free request
io_uring/msg_ring: check for dead submitter task
io_uring/msg_ring: add an alloc cache for io_kiocb entries
io_uring/msg_ring: improve handling of target CQE posting
io_uring: add io_add_aux_cqe() helper
io_uring: add remote task_work execution helper
io_uring/msg_ring: tighten requirement for remote posting
io_uring: Allocate only necessary memory in io_probe
io_uring: Fix probe of disabled operations
io_uring: Introduce IORING_OP_LISTEN
io_uring: Introduce IORING_OP_BIND
net: Split a __sys_listen helper for io_uring
net: Split a __sys_bind helper for io_uring
...
|
|
pcie_aspm=off tells the kernel not to modify the ASPM configuration. This
setting does not guarantee that ASPM (Active State Power Management) is
disabled. Hence add pcie_port_pm=off. This disables power management for
all PCIe ports.
This patch has been tested on a workstation with a Samsung SSD 970 EVO Plus
NVMe SSD.
Fixes: 4641a8e6e145 ("nvme-pci: add trouble shooting steps for timeouts")
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Use disk directly instead of getting it from bdev->bd_disk.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Single characters should be put into a sequence.
Thus use the corresponding function “seq_putc”.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
There is a hardware power-saving problem with the Lenovo N60z
board. When turn it on and leave it for 10 hours, there is a
20% chance that a nvme disk will not wake up until reboot.
Link: https://lore.kernel.org/all/2B5581C46AC6E335+9c7a81f1-05fb-4fd0-9fbb-108757c21628@uniontech.com
Signed-off-by: hmy <huanglin@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap updates from Christian Brauner:
"This contains some minor work for the iomap subsystem:
- Add documentation on the design of iomap and how to port to it
- Optimize iomap_read_folio()
- Bring back the change to iomap_write_end() to no increase i_size.
This is accompanied by a change to xfs to reserve blocks for
truncating large realtime inodes to avoid exposing stale data when
iomap_write_end() stops increasing i_size"
* tag 'vfs-6.11.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: don't increase i_size in iomap_write_end()
xfs: reserve blocks for truncating large realtime inode
Documentation: the design of iomap and how to port
iomap: Optimize iomap_read_folio
|
|
Merge in late fixes to prepare for the 6.11 net-next PR.
Conflicts:
93c3a96c301f ("net: pse-pd: Do not return EOPNOSUPP if config is null")
4cddb0f15ea9 ("net: ethtool: pse-pd: Fix possible null-deref")
30d7b6727724 ("net: ethtool: Add new power limit get and set features")
https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'eth-fbnic-add-network-driver-for-meta-platforms-host-network-interface'
Alexander Duyck says:
====================
eth: fbnic: Add network driver for Meta Platforms Host Network Interface
This patch set includes the necessary patches to enable basic Tx and Rx
over the Meta Platforms Host Network Interface. To do this we introduce a
new driver and driver directories in the form of
"drivers/net/ethernet/meta/fbnic".
The NIC itself is fairly simplistic. As far as speeds we support 25Gb,
50Gb, and 100Gb and we are mostly focused on speeds and feeds. As far as
future patch sets we will be supporting the basic Rx/Tx offloads such as
header/payload data split, TSO, checksum, and timestamp offloads. We have
access to the MAC and PCS from the NIC, however the PHY and QSFP are hidden
behind a FW layer as it is shared between 4 slices and the BMC.
Due to submission limits the general plan to submit a minimal driver for
now almost equivalent to a UEFI driver in functionality, and then follow up
over the coming months enabling additional offloads and enabling more
features for the device.
====================
Link: https://patch.msgid.link/172079913640.1778861.11459276843992867323.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RSS is controlled by the Rx filter tables. Program rules matching
on appropriate traffic types and set hashing fields using actions.
We need a separate set of rules for broadcast and multicast
because the action there needs to include forwarding to BMC.
This patch only initializes the default settings, the control
of the configuration using ethtool will come soon.
With this the necessary rules are put in place to enable Rx of packets by
the host.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079943591.1778861.17778587068185893750.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Program the Rx TCAM to control L2 forwarding. Since we are in full
control of the NIC we need to make sure we include BMC forwarding
in the rules. When host is not present BMC will program the TCAM
to get onto the network but once we take ownership it's up to
Linux driver to make sure BMC L2 addresses are handled correctly.
Co-developed-by: Sanman Pradhan <sanmanpradhan@meta.com>
Signed-off-by: Sanman Pradhan <sanmanpradhan@meta.com>
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079943202.1778861.4410412697614789017.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Handle Rx packets with basic csum and Rx hash offloads.
NIC writes back to the completion ring a head buffer descriptor
(data buffer allocated from header pages), variable number of payload
descriptors (data buffers in payload pages), an optional metadata
descriptor (type 2) and finally the primary metadata descriptor
(type 3).
This format makes scatter support fairly easy - start gathering
the pages when we see head page, gather until we see the primary
metadata descriptor, do the processing. Use XDP infra to collect
the packet fragments as we traverse the descriptors. XDP itself
is not supported yet, but it will be soon.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079942839.1778861.10509071985738726125.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Handle Tx of simple packets. Support checksum offload and gather.
Use .ndo_features_check to make sure packet geometry will be
supported by the HW, i.e. we can fit the header lengths into
the descriptor fields.
The device writes to the completion rings the position of the tail
(consumer) pointer. Read all those writebacks, obviously the last
one will be the most recent, complete skbs up to that point.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079942464.1778861.17919428039428796180.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add basic support for detecting the link and reporting it at the netdev
layer. For now we will just use the values reporeted by the firmware as the
link configuration and assume that is the current configuration of the MAC
and PCS.
With this we start the stubbing out of the phylink interface that will be
used to provide the configuration interface for ethtool in a future patch
set.
The phylink interface isn't an exact fit. As such we are currently working
around several issues in this patch set that we plan to address in the
future such as:
1. Support for FEC
2. Support for multiple lanes to handle 50GbaseR2 vs 50GbaseR1
3. Support for BMC
CC: Russell King <linux@armlinux.org.uk>
CC: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079939835.1778861.5964790909718481811.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the driver loads we need to get some initial capabilities from the
firmware to determine what the device is capable of and what functionality
needs to be enabled. Specifically we receive information about the current
state of the link and if a BMC is present.
After that when we bring the interface up we will need the ability to take
ownership from the FW. To do that we will need to notify it that we are
taking control before we start configuring the traffic classifier and MAC.
Once we have ownership we need to notify the firmware that we are still
present and active. To do that we will send a regular heartbeat to the FW.
If the FW doesn't receive the heartbeat in a timely fashion it will retake
control of the RPC and MAC and assume that the host has gone offline.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079939458.1778861.8966209942099133957.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement control path parts of Rx queue handling.
The NIC consumes memory in pages. It takes a full page and places
packets into it in a configurable manner (with the ability to define
headroom / tailroom as well as head alignment requirements).
As mentioned in prior patches there are two page submissions queues
one for packet headers and second (optional) for packet payloads.
For now feed both queues from a single page pool.
Use the page pool "fragment" API, as we can't predict upfront
how the page will be sliced.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079939092.1778861.3780136633831329550.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement basic management operations for Tx queues.
Allocate memory for submission and completion rings.
Learn how to start the queues, stop them, and wait for HW
to be idle.
We call HW rings "descriptor rings" (stored in ring->desc),
and SW context rings "buffer rings" (stored in ring->*_buf union).
This is the first patch which actually touches CSRs so add CSR
helpers.
No actual datapath / packet handling here, yet.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079938724.1778861.8329677776612865169.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allocate a netdev and figure out basics like how many queues
we need, MAC address, MTU bounds. Kick off a service task
to do various periodic things like health checking.
The service task only runs when device is open.
We have four levels of objects here:
- ring - A HW ring with head / tail pointers,
- triad - Two submission and one completion ring,
- NAPI - NAPI, with one IRQ and any number of Rx and Tx triads,
- Netdev - The ultimate container of the rings and napi vectors.
The "triad" is the only less-than-usual construct. On Rx we have
two "free buffer" submission rings, one for packet headers and
one for packet data. On Tx we have separate rings for XDP Tx
and normal Tx. So we ended up with ring triplets in both
directions.
We keep NAPIs on a local list, even though core already maintains a list.
Later on having a separate list will matter for live reconfig.
We introduce the list already, the churn would not be worth it.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079938358.1778861.11681469974633489463.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a mechanism for sending messages to and receiving messages
from the FW. The FW has fairly limited functionality, so the
mechanism doesn't have to support high message rate.
Use device mailbox registers to form two rings, one "to" and
one "from" the device. The rings are just a convention between
driver and FW, not a HW construct. We don't expect messages
larger than 4k so use page-sized buffers.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079937113.1778861.10669864213768701947.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add FW message formatting and parsing. The TLV format should
look very familiar to those familiar with netlink.
Since we don't have to deal with backward compatibility
we tweaked the format a little to make it easier to deal
with, and more appropriate for tightly coupled interfaces
like driver<>FW communication.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079936754.1778861.1029830244010564007.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As a part of enabling the device the first step is to configure the AXI and
Ethernet interfaces to allow for basic traffic. This consists of
configuring several registers related to the PCIe and Ethernet FIFOs as
well as configuring the handlers for moving traffic between entities.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079936376.1778861.15942501417449077552.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the core of the fbnic device will be the devlink interface. This
interface will eventually provide basic functionality in the event that
there are any issues with the network interface.
Add support for allocating the MSI-X vectors and setting up the BAR
mapping. With this we can start enabling various subsystems and start
brining up additional interfaces such the AXI fabric and the firmware
mailbox.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079936012.1778861.4670986685222676467.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a bare-bones PCI driver for Meta's NIC.
Subsequent changes will flesh it out.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/172079935646.1778861.9710282776096050607.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add Meta as a vendor ID for PCI devices so we can use the macro for future
drivers.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/172079935272.1778861.13619056509276833225.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
aux-sysfs-irqs
Shay Says:
==========
Introduce auxiliary bus IRQs sysfs
Today, PCI PFs and VFs, which are anchored on the PCI bus, display their
IRQ information in the <pci_device>/msi_irqs/<irq_num> sysfs files. PCI
subfunctions (SFs) are similar to PFs and VFs and these SFs are anchored
on the auxiliary bus. However, these PCI SFs lack such IRQ information
on the auxiliary bus, leaving users without visibility into which IRQs
are used by the SFs. This absence makes it impossible to debug
situations and to understand the source of interrupts/SFs for
performance tuning and debug.
Additionally, the SFs are multifunctional devices supporting RDMA,
network devices, clocks, and more, similar to their peer PCI PFs and
VFs. Therefore, it is desirable to have SFs' IRQ information available
at the bus/device level.
To overcome the above limitations, this short series extends the
auxiliary bus to display IRQ information in sysfs, similar to that of
PFs and VFs.
It adds an 'irqs' directory under the auxiliary device and includes an
<irq_num> sysfs file within it.
For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50 51 52 53 54 55 56 57 58
Patch summary:
patch-1 adds auxiliary bus to support irqs used by auxiliary device
patch-2 mlx5 driver using exposing irqs for PCI SF devices via auxiliary
bus
==========
* tag 'aux-sysfs-irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose SFs IRQs
driver core: auxiliary bus: show auxiliary device IRQs
RDMA/mlx5: Add Qcounters req_transport_retries_exceeded/req_rnr_retries_exceeded
net/mlx5: Reimplement write combining test
====================
Link: https://patch.msgid.link/20240711213140.256997-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
"This contains work to make it possible to derive namespace file
descriptors from pidfd file descriptors.
Right now it is already possible to use a pidfd with setns() to
atomically change multiple namespaces at the same time. In other
words, it is possible to switch to the namespace context of a process
using a pidfd. There is no need to first open namespace file
descriptors via procfs.
The work included here is an extension of these abilities by allowing
to open namespace file descriptors using a pidfd. This means it is now
possible to interact with namespaces without ever touching procfs.
To this end a new set of ioctls() on pidfds is introduced covering all
supported namespace types"
* tag 'vfs-6.11.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: allow retrieval of namespace file descriptors
nsfs: add open_namespace()
nsproxy: add helper to go from arbitrary namespace to ns_common
nsproxy: add a cleanup helper for nsproxy
file: add take_fd() cleanup helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace-fs updates from Christian Brauner:
"This adds ioctls allowing to translate PIDs between PID namespaces.
The motivating use-case comes from LXCFS which is a tiny fuse
filesystem used to virtualize various aspects of procfs. LXCFS is run
on the host. The files and directories it creates can be bind-mounted
by e.g. a container at startup and mounted over the various procfs
files the container wishes to have virtualized.
When e.g. a read request for uptime is received, LXCFS will receive
the pid of the reader. In order to virtualize the corresponding read,
LXCFS needs to know the pid of the init process of the reader's pid
namespace.
In order to do this, LXCFS first needs to fork() two helper processes.
The first helper process setns() to the readers pid namespace. The
second helper process is needed to create a process that is a proper
member of the pid namespace.
The second helper process then creates a ucred message with ucred.pid
set to 1 and sends it back to LXCFS. The kernel will translate the
ucred.pid field to the corresponding pid number in LXCFS's pid
namespace. This way LXCFS can learn the init pid number of the
reader's pid namespace and can go on to virtualize.
Since these two forks() are costly LXCFS maintains an init pid cache
that caches a given pid for a fixed amount of time. The cache is
pruned during new read requests. However, even with the cache the hit
of the two forks() is singificant when a very large number of
containers are running.
So this adds a simple set of ioctls that let's a caller translate PIDs
from and into a given PID namespace. This significantly improves
performance with a very simple change.
To protect against races pidfds can be used to check whether the
process is still valid"
* tag 'vfs-6.11.nsfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nsfs: add pid translation ioctls
|
|
Add support for the AP sub-system clock controller in the T-Head TH1520.
This include CPU, DPU, GMAC and TEE PLLs.
Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
Co-developed-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20240711-th1520-clk-v3-2-6ff17bb318fb@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
pid_list_fill_irq() runs via irq_work.
When CONFIG_PREEMPT_RT is disabled, it would run in irq_context.
so it shouldn't sleep while memory allocation.
Change gfp flags from GFP_KERNEL to GFP_NOWAIT to prevent sleep in
irq_work.
This change wouldn't impact functionality in practice because the worst-size
is 2K.
Cc: stable@goodmis.org
Fixes: 8d6e90983ade2 ("tracing: Create a sparse bitmask for pid filtering")
Link: https://lore.kernel.org/20240704150226.1359936-1-yeoreum.yun@arm.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: levi.yun <yeoreum.yun@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Switch the order of prev_comm and next_comm in sched_switch's code to
align with its printing order.
Cc: <mhiramat@kernel.org>
Signed-off-by: Tio Zhang <tiozhang@didiglobal.com>
Link: https://lore.kernel.org/20240703033353.GA2833@didi-ThinkCentre-M930t-N000
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount query updates from Christian Brauner:
"This contains work to extend the abilities of listmount() and
statmount() and various fixes and cleanups.
Features:
- Allow iterating through mounts via listmount() from newest to
oldest. This makes it possible for mount(8) to keep iterating the
mount table in reverse order so it gets newest mounts first.
- Relax permissions on listmount() and statmount().
It's not necessary to have capabilities in the initial namespace:
it is sufficient to have capabilities in the owning namespace of
the mount namespace we're located in to list unreachable mounts in
that namespace.
- Extend both listmount() and statmount() to list and stat mounts in
foreign mount namespaces.
Currently the only way to iterate over mount entries in mount
namespaces that aren't in the caller's mount namespace is by
crawling through /proc in order to find /proc/<pid>/mountinfo for
the relevant mount namespace.
This is both very clumsy and hugely inefficient. So extend struct
mnt_id_req with a new member that allows to specify the mount
namespace id of the mount namespace we want to look at.
Luckily internally we already have most of the infrastructure for
this so we just need to expose it to userspace. Give userspace a
way to retrieve the id of a mount namespace via statmount() and
through a new nsfs ioctl() on mount namespace file descriptor.
This comes with appropriate selftests.
- Expose mount options through statmount().
Currently if userspace wants to get mount options for a mount and
with statmount(), they still have to open /proc/<pid>/mountinfo to
parse mount options. Simply the information through statmount()
directly.
Afterwards it's possible to only rely on statmount() and
listmount() to retrieve all and more information than
/proc/<pid>/mountinfo provides.
This comes with appropriate selftests.
Fixes:
- Avoid copying to userspace under the namespace semaphore in
listmount.
Cleanups:
- Simplify the error handling in listmount by relying on our newly
added cleanup infrastructure.
- Refuse invalid mount ids early for both listmount and statmount"
* tag 'vfs-6.11.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reject invalid last mount id early
fs: refuse mnt id requests with invalid ids early
fs: find rootfs mount of the mount namespace
fs: only copy to userspace on success in listmount()
sefltests: extend the statmount test for mount options
fs: use guard for namespace_sem in statmount()
fs: export mount options via statmount()
fs: rename show_mnt_opts -> show_vfsmnt_opts
selftests: add a test for the foreign mnt ns extensions
fs: add an ioctl to get the mnt ns id from nsfs
fs: Allow statmount() in foreign mount namespace
fs: Allow listmount() in foreign mount namespace
fs: export the mount ns id via statmount
fs: keep an index of current mount namespaces
fs: relax permissions for statmount()
listmount: allow listing in reverse order
fs: relax permissions for listmount()
fs: simplify error handling
fs: don't copy to userspace under namespace semaphore
path: add cleanup helper
|
|
Merge updates of Intel thermal drivers for 6.11-rc1:
- Switch Intel thermal drivers to new Intel CPU model defines (Tony
Luck).
- Clean up the int3400 and int3403 drivers (Erick Archer and David Alan
Gilbert).
- Improve intel_pch_thermal kernel log messages printed during suspend
to idle (Zhang Rui).
- Make the intel_tcc_cooling driver use a model-specific bitmask for
TCC offset (Ricardo Neri).
- Add DLVR and MSI interrupt support for the Lunar Lake platform to the
int340x thermal driver (Srinivas Pandruvada).
- Enable workload type hints (WLT) support and power floor interrupt
support for the Lunar Lake platform in int340x ((Srinivas Pandruvada).
- Make the HFI thermal driver use package scope for HFI instances as
per the Intel SDM (Zhang Rui).
* thermal-intel:
thermal: intel: hfi: Give HFI instances package scope
thermal: intel: int340x: Enable WLT and power floor support for Lunar Lake
thermal: intel: int340x: Support MSI interrupt for Lunar Lake
thermal: intel: int340x: Remove unnecessary calls to free irq
thermal: intel: int340x: Add DLVR support for Lunar Lake
thermal: intel: int340x: Capability to map user space to firmware values
thermal: intel: int340x: Cleanup of DLVR sysfs on driver remove
thermal: intel: intel_tcc_cooling: Use a model-specific bitmask for TCC offset
thermal: intel: intel_tcc: Add model checks for temperature registers
thermal: intel: intel_pch: Improve cooling log
thermal: int3403: remove unused struct 'int3403_performance_state'
thermal: int3400: Use sizeof(*pointer) instead of sizeof(type)
thermal: intel: intel_soc_dts_thermal: Switch to new Intel CPU model defines
thermal: intel: intel_tcc_cooling: Switch to new Intel CPU model defines
|
|
Merge updates related to the thermal core for 6.11-rc1:
- Redesign the .set_trip_temp() thermal zone callback to take a trip
pointer instead of a trip ID and update its users (Rafael Wysocki).
- Avoid using invalid combinations of polling_delay and passive_delay
thermal zone parameters (Rafael Wysocki).
- Update a cooling device registration function to take a const
argument (Krzysztof Kozlowski).
- Make the uniphier thermal driver use thermal_zone_for_each_trip() for
walking trip points (Rafael Wysocki).
* thermal-core:
thermal: core: Add sanity checks for polling_delay and passive_delay
thermal: trip: Fold __thermal_zone_get_trip() into its caller
thermal: trip: Pass trip pointer to .set_trip_temp() thermal zone callback
thermal: imx: Drop critical trip check from imx_set_trip_temp()
thermal: trip: Add conversion macros for thermal trip priv field
thermal: helpers: Introduce thermal_trip_is_bound_to_cdev()
thermal: core: Change passive_delay and polling_delay data type
thermal: core: constify 'type' in devm_thermal_of_cooling_device_register()
thermal: uniphier: Use thermal_zone_for_each_trip() for walking trip points
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode / dentry updates from Christian Brauner:
"This contains smaller performance improvements to inodes and dentries:
inode:
- Add rcu based inode lookup variants.
They avoid one inode hash lock acquire in the common case thereby
significantly reducing contention. We already support RCU-based
operations but didn't take advantage of them during inode
insertion.
Callers of iget_locked() get the improvement without any code
changes. Callers that need a custom callback can switch to
iget5_locked_rcu() as e.g., did btrfs.
With 20 threads each walking a dedicated 1000 dirs * 1000 files
directory tree to stat(2) on a 32 core + 24GB ram vm:
before: 3.54s user 892.30s system 1966% cpu 45.549 total
after: 3.28s user 738.66s system 1955% cpu 37.932 total (-16.7%)
Long-term we should pick up the effort to introduce more
fine-grained locking and possibly improve on the currently used
hash implementation.
- Start zeroing i_state in inode_init_always() instead of doing it in
individual filesystems.
This allows us to remove an unneeded lock acquire in new_inode()
and not burden individual filesystems with this.
dcache:
- Move d_lockref out of the area used by RCU lookup to avoid
cacheline ping poing because the embedded name is sharing a
cacheline with d_lockref.
- Fix dentry size on 32bit with CONFIG_SMP=y so it does actually end
up with 128 bytes in total"
* tag 'vfs-6.11.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: fix dentry size
vfs: move d_lockref out of the area used by RCU lookup
bcachefs: remove now spurious i_state initialization
xfs: remove now spurious i_state initialization in xfs_inode_alloc
vfs: partially sanitize i_state zeroing on inode creation
xfs: preserve i_state around inode_init_always in xfs_reinit_inode
btrfs: use iget5_locked_rcu
vfs: add rcu-based find_inode variants for iget ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount API updates from Christian Brauner:
- Add a generic helper to parse uid and gid mount options.
Currently we open-code the same logic in various filesystems which is
error prone, especially since the verification of uid and gid mount
options is a sensitive operation in the face of idmappings.
Add a generic helper and convert all filesystems over to it. Make
sure that filesystems that are mountable in unprivileged containers
verify that the specified uid and gid can be represented in the
owning namespace of the filesystem.
- Convert hostfs to the new mount api.
* tag 'vfs-6.11.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fuse: Convert to new uid/gid option parsing helpers
fuse: verify {g,u}id mount options correctly
fat: Convert to new uid/gid option parsing helpers
fat: Convert to new mount api
fat: move debug into fat_mount_options
vboxsf: Convert to new uid/gid option parsing helpers
tracefs: Convert to new uid/gid option parsing helpers
smb: client: Convert to new uid/gid option parsing helpers
tmpfs: Convert to new uid/gid option parsing helpers
ntfs3: Convert to new uid/gid option parsing helpers
isofs: Convert to new uid/gid option parsing helpers
hugetlbfs: Convert to new uid/gid option parsing helpers
ext4: Convert to new uid/gid option parsing helpers
exfat: Convert to new uid/gid option parsing helpers
efivarfs: Convert to new uid/gid option parsing helpers
debugfs: Convert to new uid/gid option parsing helpers
autofs: Convert to new uid/gid option parsing helpers
fs_parse: add uid & gid option option parsing helpers
hostfs: Add const qualifier to host_root in hostfs_fill_super()
hostfs: convert hostfs to use the new mount API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs casefolding updates from Christian Brauner:
"This contains some work to simplify the handling of casefolded names:
- Simplify the handling of casefolded names in f2fs and ext4 by
keeping the names as a qstr to avoiding unnecessary conversions
- Introduce a new generic_ci_match() libfs case-insensitive lookup
helper and use it in both f2fs and ext4 allowing to remove the
filesystem specific implementations
- Remove a bunch of ifdefs by making the unicode build checks part of
the code flow"
* tag 'vfs-6.11.casefold' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
f2fs: Move CONFIG_UNICODE defguards into the code flow
ext4: Move CONFIG_UNICODE defguards into the code flow
f2fs: Reuse generic_ci_match for ci comparisons
ext4: Reuse generic_ci_match for ci comparisons
libfs: Introduce case-insensitive string comparison helper
f2fs: Simplify the handling of cached casefolded names
ext4: Simplify the handling of cached casefolded names
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs module description updates from Christian Brauner:
"This contains patches to add module descriptions to all modules under
fs/ currently lacking them"
* tag 'vfs-6.11.module.description' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
openpromfs: add missing MODULE_DESCRIPTION() macro
fs: nls: add missing MODULE_DESCRIPTION() macros
fs: autofs: add MODULE_DESCRIPTION()
fs: fat: add missing MODULE_DESCRIPTION() macros
fs: binfmt: add missing MODULE_DESCRIPTION() macros
fs: cramfs: add MODULE_DESCRIPTION()
fs: hfs: add MODULE_DESCRIPTION()
fs: hpfs: add MODULE_DESCRIPTION()
qnx4: add MODULE_DESCRIPTION()
qnx6: add MODULE_DESCRIPTION()
fs: sysv: add MODULE_DESCRIPTION()
fs: efs: add MODULE_DESCRIPTION()
fs: minix: add MODULE_DESCRIPTION()
|
|
The current implementation only supports a word size of 8 bits,
which limits the devices it can be used with. Add support for any
word size between 1 and 32 bits, as supported by the hardware.
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-cogwheel-uniquely-0d4ef518b809@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While transmitting with rx_len == 0, the RX FIFO is not going to be
emptied in the interrupt handler. A subsequent transfer could then
read crap from the previous transfer out of the RX FIFO into the
start RX buffer. The core provides a register that will empty the RX and
TX FIFOs, so do that before each transfer.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-flammable-provoke-459226d08e70@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mchp_corespi_init() reads the CONTROL register, sets the master and
motorola bits, but doesn't write the value back to the register. The
function also doesn't ensure the controller is disabled at the start,
which may present a problem if the controller was used by an
earlier boot stage as some settings (including the mode) can only be
modified while the controller is disabled.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-designing-thus-05f7c26e1da7@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
requires it
Setting up many of the registers for a new SPI transfer involves
unconditionally disabling the SPI controller, writing the register
value and re-enabling the controller. This is being done for registers
even when the value is unchanged and is also done for registers that
don't require the controller to be disabled for the change to take
effect. Make an effort to detect changes to the register values, and
only disables the controller if the new register value is different
and disabling the controller is required. This stops the controller
being repeated disabled and the bus going tristate before every
transfer.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-depict-twirl-7e592eeabaad@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TX FIFO
Setting up many of the registers for a new SPI transfer requires the
SPI controller to be disabled after set_cs() has been called to assert
the chip select line. However, disabling the controller results in the
SCLK and MOSI output pins being tristate, which can cause clock
transitions to be seen by a slave device whilst SS is active. To fix
this, the CS is only set to inactive inline, whilst setting it active
is deferred until all registers are set up and the any controller
disables have been completed.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-sanitizer-recant-dd96b7a97048@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is possible for the TXDONE interrupt be raised if the tx FIFO becomes
temporarily empty while transmitting, resulting in recursive calls to
mchp_corespi_write_fifo() and therefore a garbage message might be
transmitted depending on when the interrupt is triggered. Moving all of
the tx FIFO writes out of the TXDONE portion of the interrupt handler
avoids this problem.
Most of rest of the TXDONE portion of the handler is problematic too.
Only reading the rx FIFO (and finalising the transfer) when the TXDONE
interrupt is raised can cause the transfer to stall, if the final bytes
of rx data are not available in the rx FIFO when the final TXDONE
interrupt is raised. The transfer should be finalised regardless of
which interrupt is raised, provided that all tx data has been set and
all rx data received.
The first issue was encountered "in the wild", the second is
theoretical.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-candied-deforest-585685ef3c8a@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
|
