Age | Commit message (Collapse) | Author |
|
We must be sure that the HDMI controller is powered on, while performing
the DDC transfer. Add corresponding runtime PM calls to
msm_hdmi_i2c_xfer().
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651727/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-8-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The pm_runtime_get_sync() function is a bad choise for runtime power
management. Switch HDMI driver to pm_runtime_resume_and_get() and add
proper error handling, while we are at it.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651713/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-7-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The last platform using legacy clock names for HDMI block (APQ8064)
switched to new clock names in 5.16. It's time to stop caring about old
DT, drop hand-coded helpers and switch to clk_bulk_* API.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651716/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-6-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The only clock which has frequency being set through hpd_freqs is the
"core" aka MDSS_HDMI_CLK clock. It always has the specified frequency,
so we can drop corresponding clk_set_rate() call together with the
hpd_freq infrastructure.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651717/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-5-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
With the extp being the only "power" clock left, remove the surrounding
loops and handle the extp clock directly.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651710/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-4-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
According to the vendor kernel [1] , the alt_iface clock should be
enabled together with the rest of HPD clocks, to make HPD to work
properly.
[1] https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/commit/e07a5487e521e57f76083c0a6e2f995414ac6d03
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651709/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-3-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
As a preparation to the next patches convert 'static const char *'
arrays to 'static const char * const', as required by the checkpatch.pl
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/651705/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-2-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The commit 68e674b13b17 ("drm/msm/hdmi: drop unused GPIO support")
dropped support for obsolete qcom,hdmi-tx-mux-* gpios. They were not
used by any of the upstream platforms. Drop them from the bindings too.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651708/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-1-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Due to changes in allocator, the size of the allocation for
contiguous region is not rounded up to a power-of-two and
instead allocated as is. Thus, change the part of test that
expected the allocation to fail.
Signed-off-by: Mikolaj Wasiak <mikolaj.wasiak@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/fptevdfbclvg2lbfuys5ibffbl2baouywkutnr7vdsy5tzcqfk@mpflwlh6jxfd
|
|
We start to have support many Sitronix displays in the tiny directory,
and we expect more to come.
Move them to their own subdirectory.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250512-sitronix-v3-1-bbf6cc413698@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
The doctest requires `CONFIG_PCI`:
error[E0432]: unresolved import `kernel::pci`
--> rust/doctests_kernel_generated.rs:2689:44
|
2689 | use kernel::{device::Core, devres::Devres, pci};
| ^^^ no `pci` in the root
|
note: found an item that was configured out
--> rust/kernel/lib.rs:96:9
note: the item is gated here
--> rust/kernel/lib.rs:95:1
Thus conditionally compile it (which still checks the syntax).
Fixes: f301cb978c06 ("rust: devres: implement Devres::access()")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250511182533.1016163-1-ojeda@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.16-2025-05-09:
amdgpu:
- IPS fixes
- DSC cleanup
- DC Scaling updates
- DC FP fixes
- Fused I2C-over-AUX updates
- SubVP fixes
- Freesync fix
- DMUB AUX fixes
- VCN fix
- Hibernation fixes
- HDP fixes
- DCN 2.1 fixes
- DPIA fixes
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- Misc code cleanups
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
amdkfd:
- Update error messages for SDMA
- Userptr updates
drm:
- Add drm_file_err function
dma-buf:
- Add a helper to sort and deduplicate dma_fence arrays
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250509230951.3871914-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The driver handles the case where gpu fw is not in the initrd. OTOH it
doesn't always handle the case where _some_ fw is in the initrd, but
others are not. In particular the zap fw tends to be signed with an OEM
specific key, so the paths/names differ across devices with the same
SoC/GPU, so we cannot sanely list them with MODULE_FIRMWARE().
So MODULE_FIRMWARE() just ends up causing problems without actually
solving anything. Remove them!
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/652195/
|
|
This feature is supposed to be enabled with UBWC v4 or later.
Implementations of this SKU feature an effective UBWC version of 3, so
disable it, in line with the BSP kernel.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Fixes: 192f4ee3e408 ("drm/msm/a6xx: Add support for Adreno 7c Gen 3 gpu")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/651759/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Now that we have ACD support for GPU, add additional OPPs up to
Turbo L3 which are supported across all existing SKUs.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/649354/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Update GPU node to include acd level values.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/649352/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.16-rc1:
Cross-subsystem Changes:
- Change vsprintf %p4cn to %p4chR, remove %p4cn.
Core Changes:
- Documentation updates (fb rendering, actual_brightness)
Driver Changes:
- Small fixes to appletbdrm, panthor, st7571-i2c, rockchip, renesas,
panic handler, gpusvm, vkms, panel timings.
- Add AUO B140QAN08.H, BOE NE140WUM-N6S, CSW MNE007QS3-8, BOE TD4320 panels.
- Convert rk3066_hdmi to bridge driver.
- Improve HPD on anx7625.
- Speed up loading tegra firmware, and other small fixes to tegra & host1x.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/5428be12-fc08-4e28-8c5f-85d73b8a7e04@linux.intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose PCIe link downgrade attributes (Raag)
Cross-subsystem Changes:
Core Changes:
- gpusvm has_dma_mapping fix (Dafna)
Driver Changes:
- Forcewake hold fix (Tejas)
- Fix guc_info debugfs for VFs (Daniele)
- Fix devcoredump chunk alignment calculation (Arnd)
- Don't print timedout job message on killed exec queues (Matt Brost)
- Don't flush the GSC worker from the reset path (Daniele)
- Use copy_from_user() instead of __copy_from_user() (Harish)
- Only flush SVM garbage collector if CONFIG_DRM_XE_GPUSVM (Shuicheng)
- Fix forcewake vs runtime pm ref release ordering (Shuicheng)
- Move xe_device_sysfs_init() to xe_device_probe() (Raag)
- Append PCIe Gen5 limitations to xe_firmware document (Raag)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aBzUwbzCzz7Qo7fA@fedora
|
|
Async flip is not supported with Indexed 8 bit format as it depends on
LUT and can't be updated atomically.
Note: This may change the alignment for C8 framebuffers on some
platforms.
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-5-b93ef83076c5@intel.com
|
|
Hook up the newly added plane function pointer
format_mod_supported_async to populate the modifiers/formats supported
by asynchronous flips.
v5: Correct the if condition for modifier support check (Chaitanya)
v6: Replace uint32_t/uint64_t with u32/u64 (Jani)
v7: Move plannar check from intel_async_flip_check_hw() to
intel_plane_format_mod_supported_async() (Ville)
v8: In case of error print format/modifier (Chaitanya)
v9: Exclude C8 format as its not supported by hardware
v10: filter only planar formats
move changes in can_async_flip to new patch (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-4-b93ef83076c5@intel.com
|
|
The function intel_plane_can_async_flip() checks for async supported
modifier, add format support check also in the same function.
Note: on ADL the surface base addr is required to be 16k aligned and if
not might generate DMAR and GGTT faults leading to glitches. This patch
changes the 16k alignment to 4k for planar formats.
v11: Move filtering Indexed 8bit to a separate patch (Ville)
v12: correct the commit msg and remove unwanted debug print (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-3-b93ef83076c5@intel.com
|
|
create_in_formats creates the list of supported format/modifiers for
synchronous flips, modify the same function so as to take the
format_mod_supported as argument and create list of format/modifier for
async as well.
v5: create_in_formats can return -ve value in failure case, correct the
if condition to check the creation of blob <Chaitanya>
Dont add the modifier for which none of the formats is not supported.
v6: Remove the code for masking the unsupported modifiers as UMD can
leave with it. (Naveen/Chaitanya)
v7: Retain the unsupported modifiers, userspace should have no
impact, return pointer to blob instead of blob_id(Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Xaver Hugl <xaver.hugl@kde.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Naveen Kumar <naveen1.kumar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-2-b93ef83076c5@intel.com
|
|
There exists a property IN_FORMATS which exposes the plane supported
modifiers/formats to the user. In some platforms when asynchronous flip
are used all of modifiers/formats mentioned in IN_FORMATS are not
supported. This patch adds a new plane property IN_FORMATS_ASYNC to
expose the async flip supported modifiers/formats so that user can use
this information ahead and do flip with unsupported
formats/modifiers. This will save flip failures.
Add a new function pointer similar to format_mod_supported specifically
for asynchronous flip.
v2: Remove async variable from drm_plane (Ville)
v3: Add new function pointer for async (Ville)
v5: Typo corrected in commit message & some correction in the kernel
documentation. (Chaitanya)
v7: Place IN_FORMATS_ASYNC next to IN_FORMATS (Ville)
v8: replace uint32_t with u32 and uint64_t with u64 (Chaitanya)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Xaver Hugl <xaver.hugl@kde.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Naveen Kumar <naveen1.kumar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-1-b93ef83076c5@intel.com
|
|
cirrus enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417094009.29297-2-phasta@kernel.org
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:
- Fix SLPC wait boosting reference counting to avoid getting stuck on non-boost
frequency on power saving profile on DG1/DG2 (Vinay)
- Add 20ms delay to engine reset for robustness on HSW (Nitin)
- Use proper sleeping functions for timeouts shorter than 20ms (Andi)
- Fix fence not released on early probe errors for HuC (Janusz)
- Remove const from struct i915_wa list allocation (Kees)
- Apply SPDX license format where missing and use single-line format (Andi)
- Whitespace fixes (Dan, Andi)
- Selftest improvements (Mikolaj, Badal, Sk,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aBxNYp0IviE23zy-@jlahtine-mobl
|
|
For newer platforms (post DG2) hardware intentionally stalls on
submisstion of concurrent submissions on RCS and CCS of different
address spaces. With this workaround GuC will never schedule such
conlicting contexts; preventing detection of a stall as a hang.
GuC specs recommend to enable this for all platforms starting from MTL
supporting CCS.
v2: Use existing macros for version check. (Jani)
v3: Reword explanation for clarity. Remove unneeded parens. Remove
accidental comment change. (Daniele)
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250502223924.94628-1-julia.filipchuk@intel.com
|
|
The latest userspace runtime allows generating commands which do not
have any argument. Remove the corresponding check in driver IOCTL to
enable this use case.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250507161500.2339701-1-lizhi.hou@amd.com
Link: https://lore.kernel.org/r/20250507161500.2339701-1-lizhi.hou@amd.com
|
|
Add driver for the Novatek NT37801 or NT37810 AMOLED DSI 1440x3200
panel in CMD mode, used on Qualcomm MTP8750 board (SM8750).
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250508-sm8750-display-panel-v2-2-3ca072e3d1fa@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250508-sm8750-display-panel-v2-2-3ca072e3d1fa@linaro.org
|
|
Add bindings for the Novatek NT37801 or NT37810 AMOLED DSI panel.
Sources, like downstream DTS, schematics and hardware manuals, use two
model names (NT37801 and NT37810), so choose one and hope it is correct.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250508-sm8750-display-panel-v2-1-3ca072e3d1fa@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250508-sm8750-display-panel-v2-1-3ca072e3d1fa@linaro.org
|
|
Convert the Truly NT35597 2K display panel bindings to dt-schema.
The vdispp-supply & vdispn-supply are not marked as required since
in practice they are not defined in sdm845-mtp.dts which is the
only used of these bindings.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507-topic-misc-truly-nt35597-yaml-v1-1-bc719ad8dfff@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250507-topic-misc-truly-nt35597-yaml-v1-1-bc719ad8dfff@linaro.org
|
|
Except HDP v5.2 all use a common logic for HDP flush. Use a generic
function. HDP v5.2 forces NO_KIQ logic, revisit it later.
Reapply after fixing up an HDP regression.
v2: merge the fix (Alex)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: 689275140cb8 ("drm/amdgpu/hdp7.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: abe1cbaec6cf ("drm/amdgpu/hdp6.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PSP v12 won't have SRIOV function.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: f756dbac1ce1 ("drm/amdgpu/hdp5.2: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: cf424020e040 ("drm/amdgpu/hdp5.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
APU doesn't have second IH ring, so re-routing action here is a no-op.
It will take a lot of time to wait timeout from PSP during the
initialization. So remove the function in psp v12.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
sync_file_debug_add() and sync_file_debug_remove() have been unused
since 2016's
commit d4cab38e153d ("staging/android: prepare sync_file for de-staging")
Remove them.
Since sync_file_debug_add was the only thing to add to
sync_file_list_head, the code that dumps it in part of
sync_info_debugfs_show can be removed, and the declaration of
the list and it's associated lock can be removed.
(The 'fences:\n...' marker in that debugfs file is left in
so as not to change the output)
That leaves the sync_print_sync_file() helper unused, and
is thus removed.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250505233838.105668-1-linux@treblig.org
|
|
If there is a problem requiring a reset of the VCN engine, it is better to
reset the VCN engine rather than the entire GPU.
Add a reset callback for the ring which will stop and start VCN if an
issue happens.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250506204948.12048-4-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If there is a problem requiring a reset of the VCN engine, it is better to
reset the VCN engine rather than the entire GPU.
Add a reset callback for the ring which will stop and start VCN if an
issue happens.
Link: https://lore.kernel.org/r/20250506204948.12048-3-mario.limonciello@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a problem occurring on VCN 4.0.5 where in some situations a job
is timing out. This triggers a job timeout which then causes a GPU
reset for recovery. That has exposed a number of issues with GPU reset
that have since been fixed. But also a GPU reset isn't actually needed
for this circumstance. Just restarting the ring is enough.
Add a reset callback for the ring which will stop and start VCN if the
issue happens.
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3909
Link: https://lore.kernel.org/r/20250506204948.12048-2-mario.limonciello@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: c9b8dcabb52a ("drm/amdgpu/hdp4.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 18a878fd8aef0ec21648a3782f55a79790cd4073.
Revert this temporarily to make it easier to fix a regression
in the HDP handling.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smu_v13_0_display_clock_voltage_request() and
smu_v13_0_set_min_deep_sleep_dcefclk() were added in 2020 by
commit c05d1c401572 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
but have remained unused.
Remove them.
smu_v13_0_display_clock_voltage_request() was the only user
of smu_v13_0_set_hard_freq_limited_range(). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The last use of smu_v11_0_get_dpm_level_range() was removed in 2020 by
commit 46a301e14e8a ("drm/amd/powerplay: drop unnecessary Navi1x specific
APIs")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smu7_copy_bytes_from_smc() was added in 2016 by
commit 1ff55f465103 ("drm/amd/powerplay: implement smu7_smumgr for asics
with smu ip version 7.")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fix the indentation
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:6992 gfx_v11_ip_dump
compiler: gcc-11 (Debian 11.3.0-12) 11.3.0
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505071619.7sHTLpNg-lkp@intel.com/
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since secure firmware is more stable than bring up phase, I believe we
don't need such mdelays any more before wait PSP response on PSP v12.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Trigger Huang <Trigger.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If applications unmap the memory before destroying the userptr, it needs
trigger a segfault to notify user space to correct the free sequence in
VM debug mode.
v2: Send gpu access fault to user space
v3: Report gpu address to user space, remove unnecessary params
v4: update pr_err into one line, remove userptr log info
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|