| Age | Commit message (Collapse) | Author |
|---|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Bugzilla #108282 fixed: Avoid graphics corruption on 32-bit systems for Mesa 18.2.x
Avoid OOPS on LPE audio deinit. Remove two unused W/As.
Fix to correct HDMI 2.0 audio clock modes to spec.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108134508.GA28466@jlahtine-desk.ger.corp.intel.com
|
|
TCA_FLOWER_KEY_ENC_OPTS and TCA_FLOWER_KEY_ENC_OPTS_MASK can only
currently contain further nested attributes, which are parsed by
hand, so the policy is never actually used resulting in a W=1
build warning:
net/sched/cls_flower.c:492:1: warning: ‘enc_opts_policy’ defined but not used [-Wunused-const-variable=]
enc_opts_policy[TCA_FLOWER_KEY_ENC_OPTS_MAX + 1] = {
Add the validation anyway to avoid potential bugs when other
attributes are added and to make the attribute structure slightly
more clear. Validation will also set extact to point to bad
attribute on error.
Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Several fixes, mostly for rather recent regressions when running under
Xen"
* tag 'for-linus-4.20a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: remove size limit of privcmd-buf mapping interface
xen: fix xen_qlock_wait()
x86/xen: fix pv boot
xen-blkfront: fix kernel panic with negotiate_mq error path
xen/grant-table: Fix incorrect gnttab_dma_free_pages() pr_debug message
CONFIG_XEN_PV breaks xen_create_contiguous_region on ARM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix occasional page fault during boot due to memblock resizing before
the linear map is up.
- Define NET_IP_ALIGN to 0 to improve the DMA performance on some
platforms.
- lib/raid6 test build fix.
- .mailmap update for Punit Agrawal
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: memblock: don't permit memblock resizing until linear mapping is up
arm64: mm: define NET_IP_ALIGN to 0
lib/raid6: Fix arm64 test build
mailmap: Update email for Punit Agrawal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has one bugfix (qcom-geni driver), one arch enablement (i2c-omap
driver, no code change), and a new driver (nvidia-gpu) this time"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
usb: typec: ucsi: add support for Cypress CCGx
i2c: nvidia-gpu: make pm_ops static
i2c: add i2c bus driver for NVIDIA GPU
i2c: qcom-geni: Fix runtime PM mismatch with child devices
MAINTAINERS: Add entry for i2c-omap driver
i2c: omap: Enable for ARCH_K3
dt-bindings: i2c: omap: Add new compatible for AM654 SoCs
|
|
The following:
skb = skb->next;
...
if (skb == (struct sk_buff *)queue)
is transformed into:
skb = skb_peek_next(skb, queue);
...
if (!skb)
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phy core provides a handy phy_speed_to_str() helper, so use that
instead of doing our own formatting of the different known link speeds.
To do this, increase PHY_LED_TRIGGER_SPEED_SUFFIX_SIZE to 11 so we can fit
'Unsupported' if necessary.
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As a heritage from the very early days of phylib member interrupts is
defined as u32 even though it's just a flag whether interrupts are
enabled. So we can change it to a bitfield member. In addition change
the code dealing with this member in a way that it's clear we're
dealing with a bool value.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The reserved variable should be named reserved1.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ioana Ciornei says:
====================
dpaa2-eth: defer probe on object allocate
Allocatable objects on the fsl-mc bus may be probed by the fsl_mc_allocator
after the first attempts of other drivers to use them. Defer the probe when
this situation happens.
Changes in v2:
- proper handling of IS_ERR_OR_NULL
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fsl_mc_portal_allocate can fail when the requested MC portals are
not yet probed by the fsl_mc_allocator. In this situation, the driver
should defer the probe.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fsl_mc_object_allocate function can fail because not all allocatable
objects are probed by the fsl_mc_allocator at the call time. Defer the
dpaa2-eth probe when this happens.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the udp6 code path, we needed multiple tests to select the correct
mib to be updated. Since we touch at least a counter at each iteration,
it's convenient to use the recently introduced __UDPX_MIB() helper once
and remove some code duplication.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only first fragment has the sport/dport information,
not the following ones.
If we want consistent hash for all fragments, we need to
ignore ports even for first fragment.
This bug is visible for IPv6 traffic, if incoming fragments
do not have a flow label, since skb_get_hash() will give
different results for first fragment and following ones.
It is also visible if any routing rule wants dissection
and sport or dport.
See commit 5e5d6fed3741 ("ipv6: route: dissect flow
in input path if fib rules need it") for details.
[edumazet] rewrote the changelog completely.
Fixes: 06635a35d13d ("flow_dissect: use programable dissector in skb_flow_dissect and friends")
Signed-off-by: 배석진 <soukjin.bae@samsung.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__netdev_tx_sent_queue() was added in commit e59020abf0f
("net: bql: add __netdev_tx_sent_queue()") and allows for
better GSO performance.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A null dereference was observed when a sysctl was being set
from userspace and rmnet was stuck trying to complete some actions
in the NETDEV_REGISTER callback. This is because the real_dev is set
only after the device registration handler completes.
sysctl call stack -
<6> Unable to handle kernel NULL pointer dereference at
virtual address 00000108
<2> pc : rmnet_vnd_get_iflink+0x1c/0x28
<2> lr : dev_get_iflink+0x2c/0x40
<2> rmnet_vnd_get_iflink+0x1c/0x28
<2> inet6_fill_ifinfo+0x15c/0x234
<2> inet6_ifinfo_notify+0x68/0xd4
<2> ndisc_ifinfo_sysctl_change+0x1b8/0x234
<2> proc_sys_call_handler+0xac/0x100
<2> proc_sys_write+0x3c/0x4c
<2> __vfs_write+0x54/0x14c
<2> vfs_write+0xcc/0x188
<2> SyS_write+0x60/0xc0
<2> el0_svc_naked+0x34/0x38
device register call stack -
<2> notifier_call_chain+0x84/0xbc
<2> raw_notifier_call_chain+0x38/0x48
<2> call_netdevice_notifiers_info+0x40/0x70
<2> call_netdevice_notifiers+0x38/0x60
<2> register_netdevice+0x29c/0x3d8
<2> rmnet_vnd_newlink+0x68/0xe8
<2> rmnet_newlink+0xa0/0x160
<2> rtnl_newlink+0x57c/0x6c8
<2> rtnetlink_rcv_msg+0x1dc/0x328
<2> netlink_rcv_skb+0xac/0x118
<2> rtnetlink_rcv+0x24/0x30
<2> netlink_unicast+0x158/0x1f0
<2> netlink_sendmsg+0x32c/0x338
<2> sock_sendmsg+0x44/0x60
<2> SyS_sendto+0x150/0x1ac
<2> el0_svc_naked+0x34/0x38
Fixes: b752eff5be24 ("net: qualcomm: rmnet: Implement ndo_get_iflink")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Miroslav Lichvar says:
====================
More accurate PHC<->system clock synchronization
RFC->v1:
- added new patches
- separated PHC timestamp from ptp_system_timestamp
- fixed memory leak in PTP_SYS_OFFSET_EXTENDED
- changed PTP_SYS_OFFSET_EXTENDED to work with array of arrays
- fixed PTP_SYS_OFFSET_EXTENDED to break correctly from loop
- fixed timecounter updates in drivers
- split gettimex in igb driver
- fixed ptp_read_* functions to be available without
CONFIG_PTP_1588_CLOCK
This series enables a more accurate synchronization between PTP hardware
clocks and the system clock.
The first two patches are minor cleanup/bug fixes.
The third patch adds an extended version of the PTP_SYS_OFFSET ioctl,
which returns three timestamps for each measurement. The idea is to
shorten the interval between the system timestamps to contain just the
reading of the lowest register of the PHC in order to reduce the error
in the measured offset and get a smaller upper bound on the maximum
error.
The fourth patch deprecates the original gettime function.
The remaining patches update the gettime function in order to support
the new ioctl in the e1000e, igb, ixgbe, and tg3 drivers.
Tests with few different NICs in different machines show that:
- with an I219 (e1000e) the measured delay was reduced from 2500 to 1300
ns and the error in the measured offset, when compared to the cross
timestamping supported by the driver, was reduced by a factor of 5
- with an I210 (igb) the delay was reduced from 5100 to 1700 ns
- with an I350 (igb) the delay was reduced from 2300 to 750 ns
- with an X550 (ixgbe) the delay was reduced from 1950 to 650 ns
- with a BCM5720 (tg3) the delay was reduced from 2400 to 1200 ns
====================
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a driver provides gettimex64(), use it in the PTP_SYS_OFFSET ioctl
and POSIX clock's gettime() instead of gettime64(). Drivers should
provide only one of the functions.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PTP_SYS_OFFSET ioctl, which can be used to measure the offset
between a PHC and the system clock, includes the total time that the
driver needs to read the PHC timestamp.
This typically involves reading of multiple PCI registers (sometimes in
multiple iterations) and the register that contains the lowest bits of
the timestamp is not read in the middle between the two readings of the
system clock. This asymmetry causes the measured offset to have a
significant error.
Introduce a new ioctl, driver function, and helper functions, which
allow the reading of the lowest register to be isolated from the other
readings in order to reduce the asymmetry. The ioctl returns three
timestamps for each measurement:
- system time right before reading the lowest bits of the PHC timestamp
- PHC time
- system time immediately after reading the lowest bits of the PHC
timestamp
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a gettime64 call fails, return the error and avoid copying data back
to user.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reorder declarations of variables as reversed Christmas tree.
Cc: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'hns3-add-code-optimization-for-VF-reset-and-some-new-reset-feature'
Huazhong Tan says:
====================
hns3: add code optimization for VF reset and some new reset feature
Currently hardware supports below reset:
1. VF reset: triggered by sending cmd to IMP(Integrated Management
Processor). Only reset specific VF function and do not affect
other PF or VF.
2. PF reset: triggered by sending cmd to IMP. Only reset specific PF
and it's VF.
3. PF FLR: triggered by PCIe subsystem. Only reset specific PF and
it's VF.
4. VF FLR: triggered by PCIe subsystem. Only reset specific VF function
and do not affect other PF or VF.
5. Core reset: triggered by writing to register. Reset most hardware
unit, such as SSU, which affects all the PF and VF.
6. Global reset: triggered by writing to register. Reset all hardware
unit, which affects all the PF and VF.
7. IMP reset: triggered by IMU(Intelligent Management Unit) when
IMP is not longer feeding IMU's watchdog. IMU will reload the IMP
firmware and IMP will perform global reset after firmware reloading,
which affects all the PF and VF.
Current driver only support PF/VF reset, incomplete core and global
reset(lacking the vf reset handling). So this patchset adds complete
reset support in hns3 driver.
Also, this patchset contains some optimization related to reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch implements the .reset_prepare and .reset_done
ops from pci framework to support the VF FLR.
This patch uses hclgevf_set_def_reset_request() and
hclgevf_reset_event() to handle FLR, so when
hdev->default_reset_request is non zero, it means there is
some reset requseted by hclgevf_set_def_reset_request() need
to be processed. Also get the hdev from the ae_dev because
hclgevf_reset_event is called with handle being NULL.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While doing PF FLR, VF's PCIe configuration space will be cleared, so
the pci and vector of VF should be re-initialized in the VF's reset
process while PF doing FLR.
Also, this patch fixes some memory not freed problem when pci
re-initialization is done during reset process.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch implements the .reset_prepare and .reset_done
ops from pci framework to support the PF FLR.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current code only print the prompt message after receiving
the IMP reset interrupt and does not perform the corresponding driver
reset operation. This patch implements the missing IMP reset handling
in the driver.
1. The driver sets the HCLGE_STATE_CMD_DISABLE to stop sending command
after receiving the IMP reset interrupt.
2. The driver needs to notify the hardware to reload the IMP firmware.
3. The IMP firmware reloading makes the reset time of hardware longer,
so it is necessary to extend the driver's waiting time to wait for
the hardware reset to complete.
4. In hclge_check_event_cause, IMP reset event should have higher
priority than other events.
Also, after clearing HCLGE_STATE_CMD_DISABLE in the hclge_cmd_init(),
it needs to check whether there is a pending reset, if so, just set
the HCLGE_STATE_CMD_DISABLE back and return.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When calling napi_disable during reset down process, if NAPIF_STATE_MISSED
is set, napi_complete will call __napi_schedule to do the polling again.
So this patch uses HNS3_NIC_STATE_DOWN to ensure the polling is not
scheduled again.
Also, when napi_complete returns true, it means polling is scheduled
again, it is not neccssary to enable the interrupt.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since hclgevf_reset() may fail for some reasons, so it needs an error
handler to deal with it. When VF reset failed, VF can only be restored
by a higher level reset asserted by PF. So, it needs to reinitialize
its command queue, then it can respond to higher level reset.
Also, this patch adds error logging in the hclgevf_notify_client().
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to hardware's description, after the reset occurs, the driver
needs to re-initialize the command queue before sending and receiving
any commands. Therefore, the VF's driver needs to identify the command
queue needs to re-initialize with HCLGEVF_STATE_CMD_DISABLE, and does
not allow sending or receiving commands before the re-initialization.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a Core/Global/IMP reset occurs, the hardware sets the reset status
register of all PF/VF and reports a reset interrupt to all PF/VF and
firmware.
When receiving the reset interrupt:
1. The firmware will wait for 100 ms before resetting the hardware and
clear the reset status register of all PF when hardware reset is done.
2. The PF/VF driver needs to down the netdev within 100 ms and then wait
for hardware reset to finish.
3. After firmware clearing the reset status register of all PF, the PF
driver reinitializes the hardware and clear the reset status register
of it's VF.
4. After PF driver clearing the reset status register of VF, the VF driver
reinitializes the hardware.
This patch mainly add handling for the step 4.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When PF performs a function reset, the hardware will reset both PF
and all the VF belong to this PF. Hence, both PF's driver and VF's
driver need to perform corresponding reset operations.
Before PF driver asserting function reset to hardware, it firstly
set up VF's hardware reset status, and inform the VF driver with
HNAE3_VF_PF_FUNC_RESET, then VF driver sets this reset type to
reset_pending and shechule reset task to stop IO and waits for the
hardware reset status to clear. When PF driver has reinitialized the
hardware and is ready to process mailbox from VF, PF driver clears
VF's hardware reset status for VF to continue its reset process.
Also, this patch uses readl_poll_timeout to simplify the hardware reset
status waitting.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently when VF need to reset itself, it will send a cmd to PF,
after receiving the VF reset requset, PF sends a cmd to inform
VF to enter the reset process and send a cmd to firmware to do the
actual reset for the VF, it is possible that firmware has resetted
the VF, but VF has not entered the reset process, which may cause
IO not stopped problem when firmware is resetting VF.
This patch fixes it by adjusting the VF reset process, when VF
need to reset itself, it will enter the reset process first, and
it will tell the PF to send cmd to firmware to reset itself.
Add member reset_pending to struct hclgevf_dev, which indicates that
there is reset event need to be processed by the VF's reset task, and
the VF's reset task chooses the highest-level one and clears other
low-level one when it processes reset_pending.
hclge_inform_reset_assert_to_vf function is unused now, but it will
be used to support the PF reset with VF working, so declare it in
the header file.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When doing reset, the reset handling function only need to
reinitialize hardware, it makes sense to add a function to
do that job. Also the error handling of hclgevf_init_hdev is
different when it is used in reset process.
This patch adds reset_hdev to reinitialize hardware when resetting.
Also, this patch removes the hclgevf_dev_ongoing_full_reset because
it is unused now.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Igor Russkikh says:
====================
net: aquantia: 2018-11 bugfixes
The patchset fixes a number of bugs found in various areas after
driver validation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RX Checksum offloads could not be configured and ignored netdev features
flag for checksumming.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Packets with marked invalid IP/UDP/TCP checksums were considered as good
by the driver. The error was in a logic, processing offload bits in
RX descriptor.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixed a condition mistake due to which macvlans unicast
item number 32 was not added in the unicast filter.
The consequence is that when exactly 32 macvlans are created
on NIC, the last created macvlan receives no traffic because
its MAC was not registered in HW.
Fixes: 94b3b542303f ("net: aquantia: vlan unicast address list correct handling")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Tested-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IOMMU fault may occurr on unbind/bind or if_down/if_up sequence.
Although driver disables the rings on down, this is not enough.
Due to internal HW design, during subsequent initialization
NIC sometimes may reuse RX descriptors cache and write to the
host memory from the descriptor cache.
That's get catched by IOMMU on host.
This patch invalidates the descriptor cache in NIC on interface down
to prevent writing to the cached descriptors and to the memory pointed
in those descriptors.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Flow control statuses were not synchronized between blocks,
that caused packets/link drop on some corner cases, when
MAC sent PFC although Phy was not expecting these to come.
Driver should readout the negotiated FC from phy and
configure RX block accordigly.
This is done on each link change event with information from FW.
Fixes: 288551de45aa ("net: aquantia: Implement rx/tx flow control ethtools callback")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The locally maintained list for tracking hash mac table was
not freed during driver remove.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mac_hlist was initialized during adapter_up, which will be called
every time a vf device is first brought up, or every time when device
is brought up again after bringing all devices down. This means our
state of previous list is lost, causing a memleak if entries are
present in the list. To fix that, move list init to the condition
that performs initial one time adapter setup.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The locally maintained list for tracking hash mac table was
not freed during driver remove.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
if skb is NULL pointer, and the following access of skb's
skb_mstamp_ns will trigger panic, which is same as BUG_ON
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RING_PUSH_REQUESTS_AND_CHECK_NOTIFY is already able to make sure backend sees
requests before req_prod is updated.
Signed-off-by: Jacob Wen <jian.w.wen@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
- Add validation of NUMA distance map to prevent crashes with bad map
- Fix setting of dma_mask
* tag 'devicetree-fixes-for-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of, numa: Validate some distance map rules
of/device: Really only set bus DMA mask when appropriate
|
|
Pull block layer fixes from Jens Axboe:
- Two fixes for an ubd regression, one for missing locking, and one for
a missing initialization of a field. The latter was an old latent
bug, but it's now visible and triggers (Me, Anton Ivanov)
- Set of NVMe fixes via Christoph, but applied manually due to a git
tree mixup (Christoph, Sagi)
- Fix for a discard split regression, in three patches (Ming)
- Update libata git trees (Geert)
- SPDX identifier for sata_rcar (Kuninori Morimoto)
- Virtual boundary merge fix (Johannes)
- Preemptively clear memory we are going to pass to userspace, in case
the driver does a short read (Keith)
* tag 'for-linus-20181109' of git://git.kernel.dk/linux-block:
block: make sure writesame bio is aligned with logical block size
block: cleanup __blkdev_issue_discard()
block: make sure discard bio is aligned with logical block size
Revert "nvmet-rdma: use a private workqueue for delete"
nvme: make sure ns head inherits underlying device limits
nvmet: don't try to add ns to p2p map unless it actually uses it
sata_rcar: convert to SPDX identifiers
ubd: fix missing initialization of io_req
block: Clear kernel memory before copying to user
MAINTAINERS: Fix remaining pointers to obsolete libata.git
ubd: fix missing lock around request issue
block: respect virtual boundary mask in bvecs
|
