summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-15lib/percpu_counter.c: fix __percpu_counter_add()Ming Lei
__percpu_counter_add() may be called in softirq/hardirq handler (such as, blk_mq_queue_exit() is typically called in hardirq/softirq handler), so we need to call this_cpu_add()(irq safe helper) to update percpu counter, otherwise counts may be lost. This fixes the problem that 'rmmod null_blk' hangs in blk_cleanup_queue() because of miscounting of request_queue->mq_usage_counter. This patch is the v1 of previous one of "lib/percpu_counter.c: disable local irq when updating percpu couter", and takes Andrew's approach which may be more efficient for ARCHs(x86, s390) that have optimized this_cpu_add(). Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Shaohua Li <shli@fusionio.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Fan Du <fan.du@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15crash_dump: fix compilation error (on MIPS at least)Qais Yousef
In file included from kernel/crash_dump.c:2:0: include/linux/crash_dump.h:22:27: error: unknown type name `pgprot_t' when CONFIG_CRASH_DUMP=y The error was traced back to commit 9cb218131de1 ("vmcore: introduce remap_oldmem_pfn_range()") include <asm/pgtable.h> to get the missing definition Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15mm: fix crash when using XFS on loopbackMikulas Patocka
Commit 8456a648cf44 ("slab: use struct page for slab management") causes a crash in the LVM2 testsuite on PA-RISC (the crashing test is fsadm.sh). The testsuite doesn't crash on 3.12, crashes on 3.13-rc1 and later. Bad Address (null pointer deref?): Code=15 regs=000000413edd89a0 (Addr=000006202224647d) CPU: 3 PID: 24008 Comm: loop0 Not tainted 3.13.0-rc6 #5 task: 00000001bf3c0048 ti: 000000413edd8000 task.ti: 000000413edd8000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001101111100100001110 Not tainted r00-03 000000ff0806f90e 00000000405c8de0 000000004013e6c0 000000413edd83f0 r04-07 00000000405a95e0 0000000000000200 00000001414735f0 00000001bf349e40 r08-11 0000000010fe3d10 0000000000000001 00000040829c7778 000000413efd9000 r12-15 0000000000000000 000000004060d800 0000000010fe3000 0000000010fe3000 r16-19 000000413edd82a0 00000041078ddbc0 0000000000000010 0000000000000001 r20-23 0008f3d0d83a8000 0000000000000000 00000040829c7778 0000000000000080 r24-27 00000001bf349e40 00000001bf349e40 202d66202224640d 00000000405a95e0 r28-31 202d662022246465 000000413edd88f0 000000413edd89a0 0000000000000001 sr00-03 000000000532c000 0000000000000000 0000000000000000 000000000532c000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401fe42c 00000000401fe430 IIR: 539c0030 ISR: 00000000202d6000 IOR: 000006202224647d CPU: 3 CR30: 000000413edd8000 CR31: 0000000000000000 ORIG_R28: 00000000405a95e0 IAOQ[0]: vma_interval_tree_iter_first+0x14/0x48 IAOQ[1]: vma_interval_tree_iter_first+0x18/0x48 RP(r2): flush_dcache_page+0x128/0x388 Backtrace: flush_dcache_page+0x128/0x388 lo_splice_actor+0x90/0x148 [loop] splice_from_pipe_feed+0xc0/0x1d0 __splice_from_pipe+0xac/0xc0 lo_direct_splice_actor+0x1c/0x70 [loop] splice_direct_to_actor+0xec/0x228 lo_receive+0xe4/0x298 [loop] loop_thread+0x478/0x640 [loop] kthread+0x134/0x168 end_fault_vector+0x20/0x28 xfs_setsize_buftarg+0x0/0x90 [xfs] Kernel panic - not syncing: Bad Address (null pointer deref?) Commit 8456a648cf44 changes the page structure so that the slab subsystem reuses the page->mapping field. The crash happens in the following way: * XFS allocates some memory from slab and issues a bio to read data into it. * the bio is sent to the loopback device. * lo_receive creates an actor and calls splice_direct_to_actor. * lo_splice_actor copies data to the target page. * lo_splice_actor calls flush_dcache_page because the page may be mapped by userspace. In that case we need to flush the kernel cache. * flush_dcache_page asks for the list of userspace mappings, however that page->mapping field is reused by the slab subsystem for a different purpose. This causes the crash. Note that other architectures without coherent caches (sparc, arm, mips) also call page_mapping from flush_dcache_page, so they may crash in the same way. This patch fixes this bug by testing if the page is a slab page in page_mapping and returning NULL if it is. The patch also fixes VM_BUG_ON(PageSlab(page)) that could happen in earlier kernels in the same scenario on architectures without cache coherence when CONFIG_DEBUG_VM is enabled - so it should be backported to stable kernels. In the old kernels, the function page_mapping is placed in include/linux/mm.h, so you should modify the patch accordingly when backporting it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: John David Anglin <dave.anglin@bell.net>] Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Lameter <cl@linux.com> Acked-by: Pekka Enberg <penberg@kernel.org> Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15MIPS: fix blast_icache32 on loongson2Aaro Koskinen
Commit 14bd8c082016 ("MIPS: Loongson: Get rid of Loongson 2 #ifdefery all over arch/mips") failed to add Loongson2 specific blast_icache32 functions. Fix that. The patch fixes the following crash seen with 3.13-rc1: Reserved instruction in kernel code[#1]: [...] Call Trace: blast_icache32_page+0x8/0xb0 r4k_flush_cache_page+0x19c/0x200 do_wp_page.isra.97+0x47c/0xe08 handle_mm_fault+0x938/0x1118 __do_page_fault+0x140/0x540 resume_userspace_check+0x0/0x10 Code: 00200825 64834000 00200825 <bc900000> bc900020 bc900040 bc900060 bc900080 bc9000a0 Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: John Crispin <blogic@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15MIPS: fix case mismatch in local_r4k_flush_icache_range()Huacai Chen
Currently, Loongson-2 call protected_blast_icache_range() and others call protected_loongson23_blast_icache_range(), but I think the correct behavior should be the opposite. BTW, Loongson-3's cache-ops is compatible with MIPS64, but not compatible with Loongson-2. So, rename xxx_loongson23_yyy things to xxx_loongson2_yyy. The patch fixes early boot hang with 3.13-rc1, introduced in commit 14bd8c082016 ("MIPS: Loongson: Get rid of Loongson 2 #ifdefery all over arch/mips"). Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: John Crispin <blogic@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15nilfs2: fix segctor bug that causes file system corruptionAndreas Rohner
There is a bug in the function nilfs_segctor_collect, which results in active data being written to a segment, that is marked as clean. It is possible, that this segment is selected for a later segment construction, whereby the old data is overwritten. The problem shows itself with the following kernel log message: nilfs_sufile_do_cancel_free: segment 6533 must be clean Usually a few hours later the file system gets corrupted: NILFS: bad btree node (blocknr=8748107): level = 0, flags = 0x0, nchildren = 0 NILFS error (device sdc1): nilfs_bmap_last_key: broken bmap (inode number=114660) The issue can be reproduced with a file system that is nearly full and with the cleaner running, while some IO intensive task is running. Although it is quite hard to reproduce. This is what happens: 1. The cleaner starts the segment construction 2. nilfs_segctor_collect is called 3. sc_stage is on NILFS_ST_SUFILE and segments are freed 4. sc_stage is on NILFS_ST_DAT current segment is full 5. nilfs_segctor_extend_segments is called, which allocates a new segment 6. The new segment is one of the segments freed in step 3 7. nilfs_sufile_cancel_freev is called and produces an error message 8. Loop around and the collection starts again 9. sc_stage is on NILFS_ST_SUFILE and segments are freed including the newly allocated segment, which will contain active data and can be allocated at a later time 10. A few hours later another segment construction allocates the segment and causes file system corruption This can be prevented by simply reordering the statements. If nilfs_sufile_cancel_freev is called before nilfs_segctor_extend_segments the freed segments are marked as dirty and cannot be allocated any more. Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net> Reviewed-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15Merge branch 'clockevents/3.13-fixes' of ↵Ingo Molnar
git://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull clock driver fix from Daniel Lezcano: " * Soren Brinkmann fixed the cadence_ttc driver where a call to clk_get_rate happens in an interrupt context. More precisely in an IPI when the broadcast timer is initialized for each cpu in the cpuidle driver. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-15Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Single regression fix for nouveau * 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix null ptr dereferences on some boards
2014-01-15drm/nouveau: fix null ptr dereferences on some boardsBen Skeggs
Regression from "device: populate master subdev pointer only when fully constructed" Reported-by: Bob Gleitsmann <rjgleits@bellsouth.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-14qlge: Fix vlan netdev features.Jitendra Kalsaria
vlan gets the same netdev features except vlan filter. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: avoid reference counter overflows on fib_rules in multicast forwardingHannes Frederic Sowa
Bob Falken reported that after 4G packets, multicast forwarding stopped working. This was because of a rule reference counter overflow which freed the rule as soon as the overflow happend. This patch solves this by adding the FIB_LOOKUP_NOREF flag to fib_rules_lookup calls. This is safe even from non-rcu locked sections as in this case the flag only implies not taking a reference to the rule, which we don't need at all. Rules only hold references to the namespace, which are guaranteed to be available during the call of the non-rcu protected function reg_vif_xmit because of the interface reference which itself holds a reference to the net namespace. Fixes: f0ad0860d01e47 ("ipv4: ipmr: support multiple tables") Fixes: d1db275dd3f6e4 ("ipv6: ip6mr: support multiple tables") Reported-by: Bob Falken <NetFestivalHaveFun@gmx.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Thomas Graf <tgraf@suug.ch> Cc: Julian Anastasov <ja@ssi.bg> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14dm9601: add USB IDs for new dm96xx variantsPeter Korsgaard
A number of new dm96xx variants now exist. Reported-by: Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14MAINTAINERS: add virtio-dev ML for virtioMichael S. Tsirkin
Since virtio is an OASIS standard draft now, virtio implementation discussions are taking place on the virtio-dev OASIS mailing list. Update MAINTAINERS. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ieee802154: Fix memory leak in ieee802154_add_iface()Christian Engelmayer
Fix a memory leak in the ieee802154_add_iface() error handling path. Detected by Coverity: CID 710490. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14audit: Convert int limit uses to u32Joe Perches
The equivalent uapi struct uses __u32 so make the kernel uses u32 too. This can prevent some oddities where the limit is logged/emitted as a negative value. Convert kstrtol to kstrtouint to disallow negative values. Signed-off-by: Joe Perches <joe@perches.com> [eparis: do not remove static from audit_default declaration]
2014-01-14audit: Use more current logging styleJoe Perches
Add pr_fmt to prefix "audit: " to output Convert printk(KERN_<LEVEL> to pr_<level> Coalesce formats Use pr_cont Move a brace after switch Signed-off-by: Joe Perches <joe@perches.com>
2014-01-14audit: Use hex_byte_pack_upperJoe Perches
Using the generic kernel function causes the object size to increase with gcc 4.8.1. $ size kernel/audit.o* text data bss dec hex filename 18577 6079 8436 33092 8144 kernel/audit.o.new 18579 6015 8420 33014 80f6 kernel/audit.o.old Unsigned...
2014-01-14hwmon: (coretemp) Fix truncated name of alarm attributesJean Delvare
When the core number exceeds 9, the size of the buffer storing the alarm attribute name is insufficient and the attribute name is truncated. This causes libsensors to skip these attributes as the truncated name is not recognized. Reported-by: Andreas Hollmann <hollmann@in.tum.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-01-14i2c: Re-instate body of i2c_parent_is_i2c_adapter()Stephen Warren
The body of i2c_parent_is_i2c_adapter() is currently guarded by I2C_MUX. It should be CONFIG_I2C_MUX instead. Among potentially other problems, this resulted in i2c_lock_adapter() only locking I2C mux child adapters, and not the parent adapter. In turn, this could allow inter-mingling of mux child selection and I2C transactions, which could result in I2C transactions being directed to the wrong I2C bus, and possibly even switching between busses in the middle of a transaction. One concrete issue caused by this bug was corrupted HDMI EDID reads during boot on the NVIDIA Tegra Seaboard system, although this only became apparent in recent linux-next, when the boot timing was changed just enough to trigger the race condition. Fixes: 3923172b3d70 ("i2c: reduce parent checking to a NOOP in non-I2C_MUX case") Cc: Phil Carmody <phil.carmody@partner.samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-01-13net: usbnet: fix SG initialisationBjørn Mork
Commit 60e453a940ac ("USBNET: fix handling padding packet") added an extra SG entry in case padding is necessary, but failed to update the initialisation of the list. This can cause list traversal to fall off the end of the list, resulting in an oops. Fixes: 60e453a940ac ("USBNET: fix handling padding packet") Reported-by: Thomas Kear <thomas@kear.co.nz> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait socketsNeal Cardwell
Fix inet_diag_dump_icsk() to reflect the fact that both TCP_TIME_WAIT and TCP_FIN_WAIT2 connections are represented by inet_timewait_sock (not just TIME_WAIT), and for such sockets the tw_substate field holds the real state, which can be either TCP_TIME_WAIT or TCP_FIN_WAIT2. This brings the inet_diag state-matching code in line with the field it uses to populate idiag_state. This is also analogous to the info exported in /proc/net/tcp, where get_tcp4_sock() exports sk->sk_state and get_timewait4_sock() exports tw->tw_substate. Before fixing this, (a) neither "ss -nemoi" nor "ss -nemoi state fin-wait-2" would return a socket in TCP_FIN_WAIT2; and (b) "ss -nemoi state time-wait" would also return sockets in state TCP_FIN_WAIT2. This is an old bug that predates 05dbc7b ("tcp/dccp: remove twchain"). Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14md: fix problem when adding device to read-only array with bitmap.NeilBrown
If an array is started degraded, and then the missing device is found it can be re-added and a minimal bitmap-based recovery will bring it fully up-to-date. If the array is read-only a recovery would not be allowed. But also if the array is read-only and the missing device was present very recently, then there could be no need for any recovery at all, so we simply include the device in the read-only array without any recovery. However... if the missing device was removed a little longer ago it could be missing some updates, but if a bitmap is present it will be conditionally accepted pending a bitmap-based update. We don't currently detect this case properly and will include that old device into the read-only array with no recovery even though it really needs a recovery. This patch keeps track of whether a bitmap-based-recovery is really needed or not in the new Bitmap_sync rdev flag. If that is set, then the device will not be added to a read-only array. Cc: Andrei Warkentin <andreiw@vmware.com> Fixes: d70ed2e4fafdbef0800e73942482bb075c21578b Cc: stable@vger.kernel.org (3.2+) Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14md/raid10: fix bug when raid10 recovery fails to recover a block.NeilBrown
commit e875ecea266a543e643b19e44cf472f1412708f9 md/raid10 record bad blocks as needed during recovery. added code to the "cannot recover this block" path to record a bad block rather than fail the whole recovery. Unfortunately this new case was placed *after* r10bio was freed rather than *before*, yet it still uses r10bio. This is will crash with a null dereference. So move the freeing of r10bio down where it is safe. Cc: stable@vger.kernel.org (v3.1+) Fixes: e875ecea266a543e643b19e44cf472f1412708f9 Reported-by: Damian Nowak <spam@nowaker.net> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181 Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14md/raid5: fix a recently broken BUG_ON().NeilBrown
commit 6d183de4077191d1201283a9035ce57a9b05254d md/raid5: fix newly-broken locking in get_active_stripe. simplified a BUG_ON, but removed too much so now it sometimes fires when it shouldn't. When the STRIPE_EXPANDING flag is set, the stripe_head might be on a special list while multiple stripe_heads are collected, or it might not be on any list, even a 'free' list when the refcount is zero. As long as STRIPE_EXPANDING is set, it will be found and added back to a list eventually. So both of the BUG_ONs which test for the ->lru being empty or not need to avoid the case where STRIPE_EXPANDING is set. The patch which broke this was marked for -stable, so this patch needs to be applied to any branch that received 6d183de4 Fixes: 6d183de4077191d1201283a9035ce57a9b05254d Cc: stable@vger.kernel.org (any release to which above was applied) Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14md/raid1: fix request counting bug in new 'barrier' code.NeilBrown
The new iobarrier implementation in raid1 (which keeps normal writes and resync activity separate) counts every request what is not before the current resync point in either next_window_requests or current_window_requests. It flags that the request is counted by setting ->start_next_window. allow_barrier follows this model exactly and decrements one of the *_window_requests if and only if ->start_next_window is set. However wait_barrier(), which increments *_window_requests uses a slightly different test for setting -.start_next_window (which is set from the return value of this function). So there is a possibility of the counts getting out of sync, and this leads to the resync hanging. So change wait_barrier() to return a non-zero value in exactly the same cases that it increments *_window_requests. But was introduced in 3.13-rc1. Reported-by: Bruno Wolff III <bruno@wolff.to> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68061 Fixes: 79ef3a8aa1cb1523cc231c9a90a278333c21f761 Cc: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14md/raid10: fix two bugs in handling of known-bad-blocks.NeilBrown
If we discover a bad block when reading we split the request and potentially read some of it from a different device. The code path of this has two bugs in RAID10. 1/ we get a spin_lock with _irq, but unlock without _irq!! 2/ The calculation of 'sectors_handled' is wrong, as can be clearly seen by comparison with raid1.c This leads to at least 2 warnings and a probable crash is a RAID10 ever had known bad blocks. Cc: stable@vger.kernel.org (v3.1+) Fixes: 856e08e23762dfb92ffc68fd0a8d228f9e152160 Reported-by: Damian Nowak <spam@nowaker.net> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181 Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14md/raid5: Fix possible confusion when multiple write errors occur.NeilBrown
commit 5d8c71f9e5fbdd95650be00294d238e27a363b5c md: raid5 crash during degradation Fixed a crash in an overly simplistic way which could leave R5_WriteError or R5_MadeGood set in the stripe cache for devices for which it is no longer relevant. When those devices are removed and spares added the flags are still set and can cause incorrect behaviour. commit 14a75d3e07c784c004b4b44b34af996b8e4ac453 md/raid5: preferentially read from replacement device if possible. Fixed the same bug if a more effective way, so we can now revert the original commit. Reported-and-tested-by: Alexander Lyakas <alex.bolshoy@gmail.com> Cc: stable@vger.kernel.org (3.2+ - 3.2 will need a different fix though) Fixes: 5d8c71f9e5fbdd95650be00294d238e27a363b5c Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-13audit: correct a type mismatch in audit_syscall_exit()AKASHI Takahiro
audit_syscall_exit() saves a result of regs_return_value() in intermediate "int" variable and passes it to __audit_syscall_exit(), which expects its second argument as a "long" value. This will result in truncating the value returned by a system call and making a wrong audit record. I don't know why gcc compiler doesn't complain about this, but anyway it causes a problem at runtime on arm64 (and probably most 64-bit archs). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: reorder AUDIT_TTY_SET argumentsEric Paris
An admin is likely to want to see old and new values next to each other. Putting all of the old values followed by all of the new values is just hard to read as a human. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: rework AUDIT_TTY_SET to only grab spin_lock onceEric Paris
We can simplify the AUDIT_TTY_SET code to only grab the spin_lock one time. We need to determine if the new values are valid and if so, set the new values at the same time we grab the old onces. While we are here get rid of 'res' and just use err. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: remove needless switch in AUDIT_SETEric Paris
If userspace specified that it was setting values via the mask we do not need a second check to see if they also set the version field high enough to understand those values. (clearly if they set the mask they knew those values). Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: use define's for audit versionEric Paris
Give names to the audit versions. Just something for a userspace programmer to know what the version provides. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: documentation of audit= kernel parameterEric Paris
Further documentation of the 3 possible kernel value of the audit command line option. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: wait_for_auditd rework for readabilityEric Paris
We had some craziness with signed to unsigned long casting which appears wholely unnecessary. Just use signed long. Even though 2 values of the math equation are unsigned longs the result is expected to be a signed long. So why keep casting the result to signed long? Just make it signed long and use it. We also remove the needless "timeout" variable. We already have the stack "sleep_time" variable. Just use that... Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: update MAINTAINERSRichard Guy Briggs
Al's tree is stale and no longer updated. Al is no longer active in maitaining audit. Eric's tree is authoritative. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: log task info on feature changeRichard Guy Briggs
Add task information to the log when changing a feature state. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: fix incorrect set of audit_sockGao feng
NETLINK_CB(skb).sk is the socket of user space process, netlink_unicast in kauditd_send_skb wants the kernel side socket. Since the sk_state of audit netlink socket is not NETLINK_CONNECTED, so the netlink_getsockbyportid doesn't return -ECONNREFUSED. And the socket of userspace process can be released anytime, so the audit_sock may point to invalid socket. this patch sets the audit_sock to the kernel side audit netlink socket. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: print error message when fail to create audit socketGao feng
print the error message and then return -ENOMEM. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: fix dangling keywords in audit_log_set_loginuid() outputRichard Guy Briggs
Remove spaces between "new", "old" label modifiers and "auid", "ses" labels in log output since userspace tools can't parse orphaned keywords. Make variable names more consistent and intuitive. Make audit_log_format() argument code easier to read. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: log on errors from filter user rulesRichard Guy Briggs
An error on an AUDIT_NEVER rule disabled logging on that rule. On error on AUDIT_NEVER rules, log. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: audit_log_start running on auditd should not stopToshiyuki Okajima
The backlog cannot be consumed when audit_log_start is running on auditd even if audit_log_start calls wait_for_auditd to consume it. The situation is the deadlock because only auditd can consume the backlog. If the other process needs to send the backlog, it can be also stopped by the deadlock. So, audit_log_start running on auditd should not stop. You can see the deadlock with the following reproducer: # auditctl -a exit,always -S all # reboot Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Reviewed-by: gaofeng@cn.fujitsu.com Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: drop audit_cmd_lock in AUDIT_USER family of casesRichard Guy Briggs
We do not need to hold the audit_cmd_mutex for this family of cases. The possible exception to this is the call to audit_filter_user(), so drop the lock immediately after. To help in fixing the race we are trying to avoid, make sure that nothing called by audit_filter_user() calls audit_log_start(). In particular, watch out for *_audit_rule_match(). This fix will take care of systemd and anything USING audit. It still means that we could race with something configuring audit and auditd shutting down. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reported-by: toshi.okajima@jp.fujitsu.com Tested-by: toshi.okajima@jp.fujitsu.com Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13smack: call WARN_ONCE() instead of calling audit_log_start()Richard Guy Briggs
Remove the call to audit_log() (which call audit_log_start()) and deal with the errors in the caller, logging only once if the condition is met. Calling audit_log_start() in this location makes buffer allocation and locking more complicated in the calling tree (audit_filter_user()). Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13selinux: call WARN_ONCE() instead of calling audit_log_start()Richard Guy Briggs
Two of the conditions in selinux_audit_rule_match() should never happen and the third indicates a race that should be retried. Remove the calls to audit_log() (which call audit_log_start()) and deal with the errors in the caller, logging only once if the condition is met. Calling audit_log_start() in this location makes buffer allocation and locking more complicated in the calling tree (audit_filter_user()). Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: convert all sessionid declaration to unsigned intEric Paris
Right now the sessionid value in the kernel is a combination of u32, int, and unsigned int. Just use unsigned int throughout. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: Added exe field to audit core dump signal logPaul Davies C
Currently when the coredump signals are logged by the audit system, the actual path to the executable is not logged. Without details of exe, the system admin may not have an exact idea on what program failed. This patch changes the audit_log_task() so that the path to the exe is also logged. This was copied from audit_log_task_info() and the latter enhanced to avoid disappearing text fields. Signed-off-by: Paul Davies C <pauldaviesc@gmail.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: prevent an older auditd shutdown from orphaning a newer auditd startupRichard Guy Briggs
There have been reports of auditd restarts resulting in kaudit not being able to find a newly registered auditd. It results in reports such as: kernel: [ 2077.233573] audit: *NO* daemon at audit_pid=1614 kernel: [ 2077.234712] audit: audit_lost=97 audit_rate_limit=0 audit_backlog_limit=320 kernel: [ 2077.234718] audit: auditd disappeared (previously mis-spelled "dissapeared") One possible cause is a race between the shutdown of an older auditd and a newer one. If the newer one sets the daemon pid to itself in kauditd before the older one has cleared the daemon pid, the newer daemon pid will be erased. This could be caused by an automated system, or by manual intervention, but in either case, there is no use in having the older daemon clear the daemon pid reference since its old pid is no longer being referenced. This patch will prevent that specific case, returning an error of EACCES. The case for preventing a newer auditd from registering itself if there is an existing auditd is a more difficult case that is beyond the scope of this patch. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: refactor audit_receive_msg() to clarify AUDIT_*_RULE* casesRichard Guy Briggs
audit_receive_msg() needlessly contained a fallthrough case that called audit_receive_filter(), containing no common code between the cases. Separate them to make the logic clearer. Refactor AUDIT_LIST_RULES, AUDIT_ADD_RULE, AUDIT_DEL_RULE cases to create audit_rule_change(), audit_list_rules_send() functions. This should not functionally change the logic. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: log AUDIT_TTY_SET config changesRichard Guy Briggs
Log transition of config changes when AUDIT_TTY_SET is called, including both enabled and log_passwd values now in the struct. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: get rid of *NO* daemon at audit_pid=0 messageRichard Guy Briggs
kauditd_send_skb is called after audit_pid was checked to be non-zero. However, it can be set to 0 due to auditd exiting while kauditd_send_skb is still executed and this can result in a spurious warning about missing auditd. Re-check audit_pid before printing the message. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: linux-kernel@vger.kernel.org Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 06:11:44 +0000