| Age | Commit message (Collapse) | Author |
|---|
|
Fix anatop thermal related dtbs_check warnings about node name
and missing thermal-cells property.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GW75xx has a LIS2DE12TR 3-axis accelerometer on the I2C bus with an
interrupt pin. Add it to the device-tree.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add PCIe[a,b] and SATA support for i.MX8QM-MEK board.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add PCIe support for i.MX8QXP MEK board.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add PCIe support on i.MX8DXL EVK board.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add PCIe support for i.MX8QXP, i.MX8QM and i.MX8DXL.
Add SATA support for i.MX8QM, which is in hsio subsystem and is shared with
PCIe PHY.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is a spelling mistake of 'rewritting' in comments which
should be 'rewriting'.
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add PDM micphone sound card support, configure the pinmux.
This sound card supports recording sound from PDM
microphone and convert the PDM format data to PCM data.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add bt-sco sound card, which is used by BT HFP case.
It supports wb profile as default.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add wm8962 sound card which connects to sai3. The connection
of SAI3 and wm8962 is controlled by PCAL6524HEAZ module, add
gpio-hog for it.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation
board. The evaluation board features three serial ports, USB OTG, USB host
with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio,
PCIe and HDMI video output.
All of the aforementioned features except for mSATA are supported, mSATA
is not available on i.MX6DL and is only available on DHCOM populated with
i.MX6Q SoC which is already supported upstream.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Document the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation board.
The evaluation board features three serial ports, USB OTG, USB host with
an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio, PCIe
and HDMI video output.
All of the aforementioned features except for mSATA are supported, mSATA
is not available on i.MX6DL and is only available on DHCOM populated with
i.MX6Q SoC which is already supported upstream.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is a power button on the front panel of the pioneer box.
Short pressing the button will trigger the onboard MCU to
notify SG2042 through GPIO22 to enter the power-off process.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/12e65a99f1b52c52b7372e900a203063b30c74b5.1728350655.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
|
|
Add missing panel power-supply property to DT to fix the following warning.
The power supply on this device is very simple chain of regulators from the
main 24V input, describe those.
"
arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dtb: panel: 'power-supply' is a required property
"
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys
is not a bus, see dtbs_check warning:
"
arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
"
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Drop unused regulator-suspend-mem-microvolt property from PMIC regulator nodes.
This property is not used by either U-Boot, Linux, nor is it documented in the
DT bindings, remove it.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add LPI2C[5,6] and the gpio expander subnodes.
Since we are at here, also add the alias for all lpi2c and gpio nodes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add 'nxp,ctrl-ids' for SCMI firmware to configure the board ctrls as
wakeup sources.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add cpuidle node and enable cpuidle for A55.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX95 has two on-chip temperature sensors, one is inside anamix block.
This is to add the anamix temperature thermal zone and its cooling
device.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the thermal trip points for automotive and extended industrial
temperature qualification processors.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add SYS Power, BBM and MISC nodes under SCMI firmware node.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
With 'max-rx-timeout-ms' property added in 'Documentation/devicetree/
indings/firmware/arm,scmi.yaml', set the value for i.MX95.
NXP i.MX95 SCMI Firmware designation does not allow timeout, it will not
recover if the Agents use timeout design. So set a large value (5000ms)
here.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the audio card name for Colibri iMX7 to match its specific SoM
name, making it compliant with the other names for Colibri iMX6 and
Apalis iMX6.
While this is a breaking change for userspace tooling, it seems
time to implement it since no ALSA UCM or related configuration files
currently exist and we are in the the process of creating them.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the audio card name for Colibri iMX6 to match its specific SoM
name, making it less than 15 characters to fix the following warning
fsl-asoc-card sound: ASoC: driver name too long
'imx6dl-colibri-sgtl5000' -> 'imx6dl-colibri-'
making it compliant with the ALSA configuration specification [1].
While this is a breaking change for userspace tooling, it seems
time to implement it since no ALSA UCM or related configuration files
currently exist and we are in the the process of creating them.
[1] Documentation/sound/alsa-configuration.rst
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the audio card name for Apalis iMX6 to match its specific SoM
name, making it less than 15 characters to fix the following warning
fsl-asoc-card sound: ASoC: driver name too long 'imx6q-apalis-sgtl5000'
-> 'imx6q-apalis-sg'
making it compliant with the ALSA configuration specification [1].
While this is a breaking change for userspace tooling, it seems
time to implement it since no ALSA UCM or related configuration files
currently exist and we are in the the process of creating them.
[1] Documentation/sound/alsa-configuration.rst
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Kontron Electronics DL i.MX8MM consists of the BL i.MX8MM board
and a 7" LVDS panel. Provide an overlay that enables the panel.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Kontron Electronics BL i.MX8MM has oboard disply bridges for
DSI->HDMI and DSI->LVDS conversion. The DSI interface is muxed by
a GPIO-controlled switch to one of these two bridges.
By default the HDMI bridge is enabled. The LVDS bridge can be
selected by loading an additional (panel-specific) overlay.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add SARADC node for the Successive Approximation Analog to
Digital Converter used in Sophgo CV1800B SoC.
This patch only adds the active domain controller.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20240829-sg2002-adc-v5-3-aacb381e869b@bootlin.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
LicheeRV Nano B [1] is an embedded development platform based on the SOPHGO
SG2002 chip, the B(ase) version is deprived of Wifi/Bluetooth and Ethernet.
Add only support for UART and SDHCI.
Link: https://wiki.sipeed.com/hardware/en/lichee/RV_Nano/1_intro.html [1]
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20241010-sg2002-v5-2-a0f2e582b932@bootlin.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add initial device tree for the SG2002 RISC-V SoC by SOPHGO.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20241010-sg2002-v5-1-a0f2e582b932@bootlin.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
The GPU SRAM supply is supposed to be always at least 0.1V higher than
the GPU supply. However when the DT was upstreamed, the spread was
incorrectly set to 0.01V.
Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241021140537.3049232-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The RT5682i and RT5682s drivers describe two DAIs: AIF1 supports both
playback and capture, while AIF2 supports capture only.
Cherry doesn't specify which DAI to use. Although this doesn't cause
real issues because AIF1 happens to be the first DAI, it should be
corrected:
codec@1a: #sound-dai-cells: 1 was expected
Update #sound-dai-cells to 1 and adjust DAI link usages accordingly.
Fixes: 87728e3ccf35 ("arm64: dts: mediatek: mt8195-cherry: Specify sound DAI links and routing")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20241021114318.1358681-1-fshao@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The T-PHY controller at 0x11e40000 controls two underlying USB2 and USB3
PHY ports. The USB3 port works normally just like the others, so there's
no point in disabling it separately. Otherwise, board DTs would have to
enable both the T-PHY controller and one of its sub-nodes in particular,
which is slightly redundant and confusing.
Remove the status line in the u3port1 node, so it's ready to be used
once the T-PHY controller is enabled.
Fixes: 9461e0caac9e ("arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20241021081311.543625-1-fshao@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The Hana device has a second source option trackpad, but it is missing
its regulator supply. It only works because the regulator is marked as
always-on.
Add the regulator supply, but leave out the post-power-on delay. Instead,
document the post-power-on delay along with the reason for not adding
it in a comment.
Fixes: 689b937bedde ("arm64: dts: mediatek: add mt8173 elm and hana board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018082001.1296963-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The Voltorb device uses a speaker codec different from the original
Corsola device. When the Voltorb device tree was first added, the new
codec was added as a separate node when it should have just replaced the
existing one.
Merge the two nodes. The only differences are the compatible string and
the GPIO line property name. This keeps the device node path for the
speaker codec the same across the MT8186 Chromebook line. Also rename
the related labels and node names from having rt1019p to speaker codec.
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018082113.1297268-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Enable ethernet on the Genio 700 EVK board. It has been tested to work
with speeds up to 1000Mbps.
[Cleaned up to pass dtbs_check, follow DTS style guidelines, and split
between mt8188 and genio700 commits, and addressed further feedback from
the mailing list]
Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Hsuan-Yu Lin <shane.lin@canonical.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: fanyi zhang <fanyi.zhang@mediatek.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018-genio700-eth-v2-2-f3c73b85507b@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Describe the ethernet present on the MT8188.
[Cleaned up to pass dtbs_check, follow DTS style guidelines, removed
hardcoded mac address and split between mt8188 and genio700 commits,
and addressed further feedback from the mailing list]
Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Hsuan-Yu Lin <shane.lin@canonical.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018-genio700-eth-v2-1-f3c73b85507b@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The existing tegra234-p3737-0000+p3701-0000.dtb is compatible
with the following modules:
p3701-0000
p3701-0004
p3701-0005
Add support for p3701-0008. Move data that is common to all SKUs
to a new file called tegra234-p3737-0000+p3701.dtsi. Update Makefile.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add support for AGX Orin Industrial Module with AGX Orin Developer Kit.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The eMMC interface was configured to configure the FBCLK
into the Alt A setting, but this should be in GPIO mode
and available for use as a reset line. Move it to the new
mc_a_2 setting, and define this config in the generic
options.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241019-ux500-dts-updates-v1-2-a89bfbd0f680@linaro.org
|
|
The Codina Zinitix touchscreens have touchkeys for HOME and
BACK, add these now that the driver and bindings support it.
Cc: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241019-ux500-dts-updates-v1-1-a89bfbd0f680@linaro.org
|
|
Remove unused property cooling-max-state and cooling-min-state.
Remove undocument property #cooling-cells for ti,amc6821.
Fix below dtb_check warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dtb: fan-temperature-ctrlr@18: '#cooling-cells', 'cooling-max-state', 'cooling-min-state' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/hwmon/ti,amc6821.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Each DHSOM uses three digits in the Cnnn part, drop the trailing zero.
This is a change in comment, no functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
So far, only WFI is supported on i.MX8mp platform. Add support for
deeper cpuidle state "cpu-pd-wait" that would allow for better power
usage during runtime. This is a port from NXP downstream kernel.
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per fixed-clock.yaml, it is not correct to pass unit address and
reg to represent 'fixed-clock'.
Remove it to fix the following dt-schema warning:
clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/linux-arm-kernel/172808887941.121658.5039774358299826312.robh@kernel.org/
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The 'turn-on-delay-ms' property is not documented nor used anywhere else.
Remove this invalid property to fix the following dt-schema warning:
Unevaluated properties are not allowed ('turn-on-delay-ms' was unexpected)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
PCIe of i.MX8MP is dual role PCIe controller, which can work as root
complex (RC) mode and endpoint (EP) mode. Add overlay file to let it work
as EP mode.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Pull bluetooth fixes from Luiz Augusto Von Dentz:
- ISO: Fix multiple init when debugfs is disabled
- Call iso_exit() on module unload
- Remove debugfs directory on module init failure
- btusb: Fix not being able to reconnect after suspend
- btusb: Fix regression with fake CSR controllers 0a12:0001
- bnep: fix wild-memory-access in proto_unregister
Note: normally the bluetooth fixes go through the networking tree, but
this missed the weekly merge, and two of the commits fix regressions
that have caused a fair amount of noise and have now hit stable too:
https://lore.kernel.org/all/4e1977ca-6166-4891-965e-34a6f319035f@leemhuis.info/
So I'm pulling it directly just to expedite things and not miss yet
another -rc release. This is not meant to become a new pattern.
* tag 'for-net-2024-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001
Bluetooth: bnep: fix wild-memory-access in proto_unregister
Bluetooth: btusb: Fix not being able to reconnect after suspend
Bluetooth: Remove debugfs directory on module init failure
Bluetooth: Call iso_exit() on module unload
Bluetooth: ISO: Fix multiple init when debugfs is disabled
|
