summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-08Merge tag 'usb-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday" * tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block ...
2019-05-08net: dsa: sja1105: Make 'sja1105et_regs' and 'sja1105pqrs_regs' staticWang Hai
drivers/net/dsa/sja1105/sja1105_spi.c:486:21: warning: symbol 'sja1105et_regs' was not declared. Should it be static? drivers/net/dsa/sja1105/sja1105_spi.c:511:21: warning: symbol 'sja1105pqrs_regs' was not declared. Should it be static? Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai26@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08selinux: do not report error on connect(AF_UNSPEC)Paolo Abeni
calling connect(AF_UNSPEC) on an already connected TCP socket is an established way to disconnect() such socket. After commit 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure") it no longer works and, in the above scenario connect() fails with EAFNOSUPPORT. Fix the above falling back to the generic/old code when the address family is not AF_INET{4,6}, but leave the SCTP code path untouched, as it has specific constraints. Fixes: 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure") Reported-by: Tom Deseyn <tdeseyn@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08net: hns3: remove redundant assignment of l2_hdr to itselfColin Ian King
The pointer l2_hdr is being assigned to itself, this is redundant and can be removed. Addresses-Coverity: ("Evaluation order violation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08net: dsa: lantiq: fix spelling mistake "brigde" -> "bridge"Colin Ian King
There are several spelling mistakes in dev_err messages. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08openvswitch: Replace removed NF_NAT_NEEDED with IS_ENABLED(CONFIG_NF_NAT)Geert Uytterhoeven
Commit 4806e975729f99c7 ("netfilter: replace NF_NAT_NEEDED with IS_ENABLED(CONFIG_NF_NAT)") removed CONFIG_NF_NAT_NEEDED, but a new user popped up afterwards. Fixes: fec9c271b8f1bde1 ("openvswitch: load and reference the NAT helper.") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08ipv4: Fix raw socket lookup for local trafficDavid Ahern
inet_iif should be used for the raw socket lookup. inet_iif considers rt_iif which handles the case of local traffic. As it stands, ping to a local address with the '-I <dev>' option fails ever since ping was changed to use SO_BINDTODEVICE instead of cmsg + IP_PKTINFO. IPv6 works fine. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL ↵Hangbin Liu
not supplied With commit 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") we now able to check if a rule already exists. But this only works with iproute2. For other tools like libnl, NetworkManager, it still could add duplicate rules with only NLM_F_CREATE flag, like [localhost ~ ]# ip rule 0: from all lookup local 32766: from all lookup main 32767: from all lookup default 100000: from 192.168.7.5 lookup 5 100000: from 192.168.7.5 lookup 5 As it doesn't make sense to create two duplicate rules, let's just return 0 if the rule exists. Fixes: 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") Reported-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08drm/cma-helper: Fix drm_gem_cma_free_object()Noralf Trønnes
The logic for freeing an imported buffer with a virtual address is broken. It will free the buffer instead of unmapping the dma buf. Fix by reversing the if ladder and first check if the buffer is imported. Fixes: b9068cde51ee ("drm/cma-helper: Add DRM_GEM_CMA_VMAP_DRIVER_OPS") Cc: stable@vger.kernel.org Reported-by: "Li, Tingqian" <tingqian.li@intel.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190426124753.53722-1-noralf@tronnes.org
2019-05-08tool headers nolibc: add RISCV supportPranith Kumar
This adds support for the RISCV architecture (32 and 64 bit) to the nolibc header file. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> [willy: minimal rewording of the commit message] Signed-off-by: Willy Tarreau <w@1wt.eu>
2019-05-08ALSA: line6: toneport: Fix broken usage of timer for delayed executionTakashi Iwai
The line6 toneport driver has code for some delayed initialization, and this hits the kernel Oops because mutex and other sleepable functions are used in the timer callback. Fix the abuse by a delayed work instead so that everything works gracefully. Reported-by: syzbot+a07d0142e74fdd595cfb@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-08ALSA: aica: Fix a long-time build breakageTakashi Iwai
The build of aica sound driver has been broken since the timer API conversion and some code rewrite. This patch fixes the breakage by using the common substream field, as well as a bit cleaning up wrt the timer handling in the code. Fixes: d522bb6a105f ("ALSA: sh: aica: Convert timers to use timer_setup()") Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-08fuse: clean up fuse_alloc_inodezhangliguang
This patch cleans up fuse_alloc_inode function, just simply the code, no logic change. Signed-off-by: zhangliguang <zhangliguang@linux.alibaba.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-05-08mfd: max77620: Provide system power-off functionalityDmitry Osipenko
Provide system power-off functionality that allows to turn off machine gracefully. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08mfd: max77620: Support Maxim 77663Dmitry Osipenko
Add support for Maxim 77663 using the Max77620 driver. The hardware is very similar to Max77663/20024, although there are couple minor differences. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08mfd: max77620: Fix swapped FPS_PERIOD_MAX_US valuesDmitry Osipenko
The FPS_PERIOD_MAX_US definitions are swapped for MAX20024 and MAX77620, fix it. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08dt-bindings: mfd: max77620: Add system-power-controller propertyDmitry Osipenko
Document new generic property that designates the PMIC as the system's power controller. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08dt-bindings: mfd: max77620: Add compatible for Maxim 77663Dmitry Osipenko
Maxim 77663 has a few minor differences in regards to hardware interface and available capabilities by comparing it with 77620 and 20024 models, hence re-use 77620 device-tree binding for the 77663. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08ovl: relax WARN_ON() for overlapping layers use caseAmir Goldstein
This nasty little syzbot repro: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Creates overlay mounts where the same directory is both in upper and lower layers. Simplified example: mkdir foo work mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work" The repro runs several threads in parallel that attempt to chdir into foo and attempt to symlink/rename/exec/mkdir the file bar. The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests that an overlay inode already exists in cache and is hashed by the pointer of the real upper dentry that ovl_create_real() has just created. At the point of the WARN_ON(), for overlay dir inode lock is held and upper dir inode lock, so at first, I did not see how this was possible. On a closer look, I see that after ovl_create_real(), because of the overlapping upper and lower layers, a lookup by another thread can find the file foo/bar that was just created in upper layer, at overlay path foo/foo/bar and hash the an overlay inode with the new real dentry as lower dentry. This is possible because the overlay directory foo/foo is not locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find it without taking upper dir inode shared lock. Overlapping layers is considered a wrong setup which would result in unexpected behavior, but it shouldn't crash the kernel and it shouldn't trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn() instead to cover all cases of failure to get an overlay inode. The error returned from failure to insert new inode to cache with inode_insert5() was changed to -EEXIST, to distinguish from the error -ENOMEM returned on failure to get/allocate inode with iget5_locked(). Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Fixes: 01b39dcc9568 ("ovl: use inode_insert5() to hash a newly...") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-05-08MAINTAINERS: Add an entry for MAX77650 PMIC driverBartosz Golaszewski
I plan on extending this set of drivers so add myself as maintainer. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08input: max77650: Add onkey supportBartosz Golaszewski
Add support for the push- and slide-button events for max77650. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08leds: max77650: Add LEDs supportBartosz Golaszewski
This adds basic support for LEDs for the max77650 PMIC. The device has three current sinks for driving LEDs. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08gpio: max77650: Add GPIO supportBartosz Golaszewski
Add GPIO support for max77650 mfd device. This PMIC exposes a single GPIO line. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08power: supply: max77650: Add support for battery chargerBartosz Golaszewski
Add basic support for the battery charger for max77650 PMIC. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08mfd: Add new driver for MAX77650 PMICBartosz Golaszewski
Add the core MFD driver for max77650 PMIC. We define five sub-devices for which the drivers will be added in subsequent patches. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08mfd: mfd-core: Document mfd_add_devices()Bartosz Golaszewski
Add a kernel doc for mfd_add_devices(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08dt-bindings: input: Add DT bindings for max77650Bartosz Golaszewski
Add the DT binding document for the onkey module of max77650. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08dt-bindings: leds: Add DT bindings for max77650Bartosz Golaszewski
Add the DT binding document for the LEDs module of max77650. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08dt-bindings: power: supply: Add DT bindings for max77650Bartosz Golaszewski
Add the DT binding document for the battery charger module of max77650. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08dt-bindings: mfd: Add DT bindings for max77650Bartosz Golaszewski
Add a DT binding document for max77650 ultra-low power PMIC. This describes the core mfd device and the GPIO module. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-08x86/speculation/mds: Fix documentation typoJosh Poimboeuf
Fix a minor typo in the MDS documentation: "eanbled" -> "enabled". Reported-by: Jeff Bastian <jbastian@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-05-08Documentation: Correct the possible MDS sysfs valuesTyler Hicks
Adjust the last two rows in the table that display possible values when MDS mitigation is enabled. They both were slightly innacurate. In addition, convert the table of possible values and their descriptions to a list-table. The simple table format uses the top border of equals signs to determine cell width which resulted in the first column being far too wide in comparison to the second column that contained the majority of the text. Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-05-08x86/mds: Add MDSUM variant to the MDS documentationspeck for Pawan Gupta
Updated the documentation for a new CVE-2019-11091 Microarchitectural Data Sampling Uncacheable Memory (MDSUM) which is a variant of Microarchitectural Data Sampling (MDS). MDS is a family of side channel attacks on internal buffers in Intel CPUs. MDSUM is a special case of MSBDS, MFBDS and MLPDS. An uncacheable load from memory that takes a fault or assist can leave data in a microarchitectural structure that may later be observed using one of the same methods used by MSBDS, MFBDS or MLPDS. There are no new code changes expected for MDSUM. The existing mitigation for MDS applies to MDSUM as well. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Reviewed-by: Jon Masters <jcm@redhat.com>
2019-05-08ALSA: hda/realtek - Support low power consumption for ALC256Kailang Yang
Remove hp_pin = 0 return. Add the default pin 0x21 as headphone. Supported low power consumption, it must do depop procedure when headset jack was plugged or unplugged. So, alc256_init() and alc256_shutup() must run delay when headset jack was plugged or unplugged. If depop procedure not run with delay, it will have a chance to let power consumption raise high. [ NOTE: this is a quite quite similar change for ALC295 by commit d3ba58bb8959 ("ALSA: hda/realtek - Support low power consumption for ALC295"), but applied to ALC256 codec instead -- tiwai ] Fixes: 8983eb602af5 ("ALSA: hda/realtek - Move to ACT_INIT state") Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-08watchdog: Enforce that at least one pretimeout governor is enabledGuenter Roeck
Since commit "watchdog: Use depends instead of select for pretimeout governors", it was possible to enable pretimeout governors but keep all of them disabled. Doing this results in the following build failure. ../drivers/watchdog/watchdog_pretimeout.c: In function ‘watchdog_register_governor’: ../drivers/watchdog/watchdog_pretimeout.c:139:26: error: ‘WATCHDOG_PRETIMEOUT_DEFAULT_GOV’ undeclared if (!strncmp(gov->name, WATCHDOG_PRETIMEOUT_DEFAULT_GOV, Since it does not make sense to enable pretimeout support but disable all pretimeout governors, enforce that at least one of them is always enabled. Fixes: f627ac0e12cd ("watchdog: Use depends instead of select for pretimeout governors") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-08Merge tag 'asoc-v5.2-2' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.2 A bunch of driver specific fixes that came in since the initial pull request for v5.2, mainly warning fixes for the newly added Sound Open Firmware code which people appeared to only start looking at after I'd sent the pull request.
2019-05-08ASoC: stm32: i2s: update pcm hardware constraintsOlivier Moysan
- Set period minimum size. Ensure at least 5ms period up to 48kHz/16 bits to prevent underrun/overrun. - Remove MDMA constraints on period maximum size and set period maximum to half the buffer maximum size. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: codec: hdac_hdmi: no checking monitor in hw_paramsLibin Yang
Some userspace apps, like pulseaudio, may call open, hw_params, prepare to judge whether the pcm is ready or not. Current hdac_hdmi will return -ENODEV if monitor is not connected, which will cause the apps believe the pcm is not ready. Actually PCM for hdmi is ready, even the monitor is not connected. This patch removes the check of monitor presence in hw_params, just like what the legacy HD-Audio driver does. Signed-off-by: Libin Yang <libin.yang@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: mediatek: mt6358: save PGA for mixer controlTzung-Bi Shih
mt6358_amic_disable() resets PGA to 0. Save the gain settings from mixer control and restore them when using the microphone. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: mediatek: mt6358: save output volume for mixer controlsTzung-Bi Shih
Output volume settings from mixer controls would be lost. Imagine that "Headphone Volume" has set to -10dB via amixer: - in mtk_hp_enable() - hp_store_gain() saves the volume setting -10dB from regmap_read() to ana_gain[AUDIO_ANALOG_VOLUME_HPOUTL] - headset_volume_ramp() ramps up from -10dB to -10dB - in mtk_hp_disable() - headset_volume_ramp() ramps down from -10dB to -40dB Next time in mtk_hp_enable(), hp_store_gain() would save -40dB but not -10dB. As a result, headset_volume_ramp() would ramp from -10dB to -40dB (which is mute). Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: mediatek: mt6358: initialize setting when ramping volumeTzung-Bi Shih
Mt6358 ramps up from the smallest volume (i.e. -10dB) to target dB when opening and ramps down from target dB to mute (i.e. -40dB) when closing. If target is equal to -10dB when opening, headset_volume_ramp() simply leaves current setting (which may not be -10dB) unchanged. Execute the loop at least once to initialize the setting to the starting point (i.e. from). Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: SOF: core: fix undefined nocodec referencePierre-Louis Bossart
The existing code mistakenly uses IS_ENABLED in C code instead of as in conditional compilation, leading to the following error: ld: sound/soc/sof/core.o: in function `sof_machine_check': sound/soc/sof/core.c:279: undefined reference to `sof_nocodec_setup' Fix by using #if !IS_ENABLED() Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: SOF: xtensa: fix undefined referencesPierre-Louis Bossart
The SND_SOC_INTEL_COMMON Kconfig was removed months ago from SOF Kconfig files but is still selected instead of the correct SND_SOC_SOF_INTEL_COMMON kconfig which does select xtensa stuff, leading to the following errors. ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x120): undefined reference to `sof_xtensa_arch_ops' ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x180): undefined reference to `sof_xtensa_arch_ops' ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x1e0): undefined reference to `sof_xtensa_arch_ops' Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properlyTakashi Iwai
This fixes a compile warning below by properly handling the error code from sof_get_ctrl_copy_params(): include/linux/kernel.h:843:43: warning: 'sparams.pl_size' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/soc/sof/ipc.c:639:34: note: 'sparams.pl_size' was declared here The function returns an error before setting sparams.pl_size, so it'd assign an uninitialized value at a later point. Fixes: 53e0c72d98ba ("ASoC: SOF: Add support for IPC IO between DSP and Host") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14)Jeremy Soller
On the System76 Gazelle (gaze14), there is a headset microphone input attached to 0x1a that does not have a jack detect. In order to get it working, the pin configuration needs to be set correctly, and the ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is identical to the patch already applied for the System76 Darter Pro (darp5). Signed-off-by: Jeremy Soller <jeremy@system76.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-07Merge tag 'devicetree-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Fix possible memory leak in reserved-memory failure case - Support for DMA parent bus which are not a parent node - Clang -Wunsequenced fix - Remove some unnecessary prints on memory alloc failures - Various printk msg and comment fixes - Update DT schema tools repository location - Convert simple-framebuffer binding to DT schema - Bindings for isl68137 and ir38064 trivial devices - New documentation on binding do's and don't's for binding writers to ignore * tag 'devicetree-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits) of: unittest: Remove error printing on OOM of: irq: Remove WARN_ON() for kzalloc() failure dt-bindings: pinctrl: fix bias-pull,up typo dt-bindings: Update schema project location to devicetree.org github group of: fix clang -Wunsequenced for be32_to_cpu() of/device.c: fix the wrong comments dt-bindings: Add isl68137 as a trivial device dt-bindings: Add ir38064 as a trivial device of: del redundant type conversion dt-bindings: mfd: axp20x: Add fallback for axp805 of: Improve of_phandle_iterator_next() error message dt-bindings: connector: Spelling mistake dt-bindings: Add schemas for simple-framebuffer of: address: Add support for the parent DMA bus of: address: Retrieve a parent through a callback in __of_translate_address dt-bindings: bus: Add binding for the Allwinner MBUS controller dt-bindings: interconnect: Add a dma interconnect name of: use correct function prototype for of_overlay_fdt_apply() of: reserved_mem: fix reserve memory leak of: property: Document that of_graph_get_endpoint_by_regs needs of_node_put ...
2019-05-07Merge tag 'random_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull randomness updates from Ted Ts'o: - initialize the random driver earler - fix CRNG initialization when we trust the CPU's RNG on NUMA systems - other miscellaneous cleanups and fixes. * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: add a spinlock_t to struct batched_entropy random: document get_random_int() family random: fix CRNG initialization when random.trust_cpu=1 random: move rand_initialize() earlier random: only read from /dev/random after its pool has received 128 bits drivers/char/random.c: make primary_crng static drivers/char/random.c: remove unused stuct poolinfo::poolbits drivers/char/random.c: constify poolinfo_table
2019-05-07Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds
Pull fscrypt updates from Ted Ts'o: "Clean up fscrypt's dcache revalidation support, and other miscellaneous cleanups" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: cache decrypted symlink target in ->i_link vfs: use READ_ONCE() to access ->i_link fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext fscrypt: only set dentry_operations on ciphertext dentries fs, fscrypt: clear DCACHE_ENCRYPTED_NAME when unaliasing directory fscrypt: fix race allowing rename() and link() of ciphertext dentries fscrypt: clean up and improve dentry revalidation fscrypt: use READ_ONCE() to access ->i_crypt_info fscrypt: remove WARN_ON_ONCE() when decryption fails fscrypt: drop inode argument from fscrypt_get_ctx()
2019-05-07cifs: update module internal version numberSteve French
To 2.20 Signed-off-by: Steve French <stfrench@microsoft.com>
generated by cgit (git 2.34.1) at 2025-09-16 17:51:55 +0000