summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-10drm/amd/display: Do not enable replay when vtotal update is pending.Danny Wang
[Why&How] Vtotal is not applied to HW when handling vsync interrupt. Make sure vtotal is aligned before enable replay. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Danny Wang <danny.wang@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add and use new dm_prepare_suspend() callbackMario Limonciello
[Why] The displays currently don't get turned off until after other IP blocks have been suspended. However turning off the displays first gives a very visible response that the system is on it's way down. [How] Turn off displays in a prepare_suspend() callback instead when possible. This will help for suspend and hibernate sequences. The shutdown sequence however will not call prepare() so check whether the state has been already saved to decide what to do. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Restore correct backlight brightness after a GPU resetMario Limonciello
[Why] GPU reset will attempt to restore cached state, but brightness doesn't get restored. It will come back at 100% brightness, but userspace thinks it's the previous value. [How] When running resume sequence if GPU is in reset restore brightness to previous value. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: fix default brightnessMario Limonciello
[Why] To avoid flickering during boot default brightness level set by BIOS should be maintained for as much of the boot as feasible. commit 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") attempted to set the right levels for AC vs DC, but brightness still got reset to maximum level in initialization code for setup_backlight_device(). [How] Remove the hardcoded initialization in setup_backlight_device() and instead program brightness value to match BIOS (AC or DC). This avoids a brightness flicker from kernel changing the value. Userspace may however still change it during boot. Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add more debug data to dmub_srvJoshua Aberback
[Why] When analyzing some crash dumps, not all of the expected DMUB info was available, so we want to add in-object storage for this data. [How] - dmub_srv_debug (renamed to dmub_timeout_info) is already a member of dmub_diagnostic_data, therefore keep a dmub_diagnostic_data directly in dmub_srv - use dmub_srv->debug when collecting diagnostic info instead of stack object to allow for easy inspection in crash dumps Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Disable unneeded hpd interrupts during dm_initLeo Li
[Why] It seems HPD interrupts are enabled by default for all connectors, even if the hpd source isn't valid. An eDP for example, does not have a valid hpd source (but does have a valid hpdrx source; see construct_phy()). Thus, eDPs should have their hpd interrupt disabled. In the past, this wasn't really an issue. Although the driver gets interrupted, then acks by writing to hw registers, there weren't any subscribed handlers that did anything meaningful (see register_hpd_handlers()). But things changed with the introduction of IPS. s2idle requires that the driver allows IPS for DMUB fw to put hw to sleep. Since register access requires hw to be awake, the driver will block IPS entry to do so. And no IPS means no hw sleep during s2idle. This was the observation on DCN35 systems with an eDP. During suspend, the eDP toggled its hpd pin as part of the panel power down sequence. The driver was then interrupted, and acked by writing to registers, blocking IPS entry. [How] Since DC marks eDP connections as having invalid hpd sources (see construct_phy()), DM should disable them at the hw level. Do so in amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively enabling ones for connectors that have valid hpd sources. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Fix incorrect DPCD configs while Replay/PSR switchLeon Huang
[Why] When switching between PSR/Replay, the DPCD config of previous mode is not cleared, resulting in unexpected behavior in TCON. [How] Initialize the DPCD in setup function Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amdkfd: Add pm_config_dequeue_wait_counts APIHarish Kasiviswanathan
Update pm_update_grace_period() to more cleaner pm_config_dequeue_wait_counts(). Previously, grace_period variable was overloaded as a variable and a macro, making it inflexible to configure additional dequeue wait times. pm_config_dequeue_wait_counts() now takes in a cmd / variable. This allows flexibility to update different dequeue wait times. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amdgpu/vcn: fix idle work handler for VCN 2.5Alex Deucher
VCN 2.5 uses the PG callback to enable VCN DPM which is a global state. As such, we need to make sure all instances are in the same state. v2: switch to a ref count (Lijo) v3: switch to its own idle work handler v4: fix logic in DPG handling Fixes: 4ce4fe27205c ("drm/amdgpu/vcn: use per instance callbacks for idle work handler") Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: allow 256B DCC max compressed block sizes on gfx12Marek Olšák
The hw supports it. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/appletbdrm: Fix ref-counting on dmadevThomas Zimmermann
Remove the put_device() call on dmadev. The driver sets the field without getting a reference, so it shouldn't put a reference either. The dmadev field points to the regular USB device for which DRM maintains a reference internally. Hence dmadev will not become dangling during the DRM device's lifetime. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 0670c2f56e45 ("drm/tiny: add driver for Apple Touch Bars in x86 Macs") Cc: Aditya Garg <gargaditya08@live.com> Cc: Aun-Ali Zaidi <admin@kodeit.net> Cc: dri-devel@lists.freedesktop.org Acked-by: Aditya Garg <gargaditya08@live.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307083702.142675-1-tzimmermann@suse.de
2025-03-09Linux 6.14-rc6v6.14-rc6Linus Torvalds
2025-03-10Merge tag 'amd-drm-next-6.15-2025-03-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amdgpu: - Fix spelling typos - RAS updates - VCN 5.0.1 updates - SubVP fixes - DCN 4.0.1 fixes - MSO DPCD fixes - DIO encoder refactor - PCON fixes - Misc cleanups - DMCUB fixes - USB4 DP fixes - DM cleanups - Backlight cleanups and fixes - Support platform backlight curves - Misc code cleanups - SMU 14 fixes - JPEG 4.0.3 reset updates - SR-IOV fixes - SVM fixes - GC 12 DCC fixes - DC DCE 6.x fix - Hiberation fix amdkfd: - Fix possible NULL pointer in queue validation - Remove unnecessary CP domain validation - SDMA queue reset support - Add per process flags radeon: - Fix spelling typos - RS400 hyperZ fix UAPI: - Add KFD per process flags for setting precision Proposed user space: https://github.com/ROCm/ROCR-Runtime/commit/2a64fa5e06e80e0af36df4ce0c76ae52eeec0a9d Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307211051.1880472-1-alexander.deucher@amd.com
2025-03-09Merge tag 'kbuild-fixes-v6.14-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Use the specified $(LD) when building userprogs with Clang - Pass the correct target triple when compile-testing UAPI headers with Clang - Fix pacman-pkg build error with KBUILD_OUTPUT * tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT docs: Kconfig: fix defconfig description kbuild: hdrcheck: fix cross build with clang kbuild: userprogs: use correct lld when linking through clang
2025-03-09Merge tag 'usb-6.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes for some reported issues. These contain: - typec driver fixes - dwc3 driver fixes - xhci driver fixes - renesas controller fixes - gadget driver fixes - a new USB quirk added All of these have been in linux-next with no reported issues" * tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Fix NULL pointer access usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader usb: xhci: Fix host controllers "dying" after suspend and resume usb: dwc3: Set SUSPENDENABLE soon after phy init usb: hub: lack of clearing xHC resources usb: renesas_usbhs: Flush the notify_hotplug_work usb: renesas_usbhs: Use devm_usb_get_phy() usb: renesas_usbhs: Call clk_put() usb: dwc3: gadget: Prevent irq storm when TH re-executes usb: gadget: Check bmAttributes only if configuration is valid xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts usb: xhci: Enable the TRB overfetch quirk on VIA VL805 usb: gadget: Fix setting self-powered state on suspend usb: typec: ucsi: increase timeout for PPM reset operations acpi: typec: ucsi: Introduce a ->poll_cci method usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality usb: gadget: Set self-powered based on MaxPower and bmAttributes usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails usb: atm: cxacru: fix a flaw in existing endpoint checks
2025-03-09Merge tag 'driver-core-6.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core fix that resolves a reported memory leak. It's been in linux-next for 2 weeks now with no reported problems" * tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: core: fix device leak in __fw_devlink_relax_cycles()
2025-03-09Merge tag 'char-misc-6.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc/IIO driver fixes from Greg KH: "Here are a number of misc and char and iio driver fixes that have been sitting in my tree for way too long. They contain: - iio driver fixes for reported issues - regression fix for rtsx_usb card reader - mei and mhi driver fixes - small virt driver fixes - ntsync permissions fix - other tiny driver fixes for reported problems. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits) Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection" ntsync: Check wait count based on byte size. bus: simple-pm-bus: fix forced runtime PM use char: misc: deallocate static minor in error path eeprom: digsy_mtc: Make GPIO lookup table match the device drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl binderfs: fix use-after-free in binder_devices slimbus: messaging: Free transaction ID in delayed interrupt scenario vbox: add HAS_IOPORT dependency cdx: Fix possible UAF error in driver_override_show() intel_th: pci: Add Panther Lake-P/U support intel_th: pci: Add Panther Lake-H support intel_th: pci: Add Arrow Lake support intel_th: msu: Fix less trivial kernel-doc warnings intel_th: msu: Fix kernel-doc warnings MAINTAINERS: change maintainer for FSI ntsync: Set the permissions to be 0666 bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO mei: me: add panther lake P DID ...
2025-03-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "arm64: - Fix a couple of bugs affecting pKVM's PSCI relay implementation when running in the hVHE mode, resulting in the host being entered with the MMU in an unknown state, and EL2 being in the wrong mode x86: - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow - Ensure DEBUGCTL is context switched on AMD to avoid running the guest with the host's value, which can lead to unexpected bus lock #DBs - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly emulate BTF. KVM's lack of context switching has meant BTF has always been broken to some extent - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest can enable DebugSwap without KVM's knowledge - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO memory" phase without actually generating a write-protection fault - Fix a printf() goof in the SEV smoke test that causes build failures with -Werror - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2 isn't supported by KVM" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM KVM: selftests: Fix printf() format goof in SEV smoke test KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3 KVM: SVM: Save host DR masks on CPUs with DebugSwap KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu() KVM: arm64: Initialize HCR_EL2.E2H early KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled KVM: x86: Snapshot the host's DEBUGCTL in common x86 KVM: SVM: Suppress DEBUGCTL.BTF on AMD KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value KVM: selftests: Assert that STI blocking isn't set after event injection KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
2025-03-09gpu: nova-core: add initial documentationDanilo Krummrich
Add the initial documentation of the Nova project. The initial project documentation consists out of a brief introduction of the project, as well as project guidelines both general and nova-core specific and a task list for nova-core specifically. The task list is divided into tasks for general Rust infrastructure required by the project, tasks regarding GSP enablement and firmware abstraction, general GPU driver tasks as well as tasks related to external API design and test infrastructure. Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250306222336.23482-6-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-03-09gpu: nova-core: add initial driver stubDanilo Krummrich
Add the initial nova-core driver stub. nova-core is intended to serve as a common base for nova-drm (the corresponding DRM driver) and the vGPU manager VFIO driver, serving as a hard- and firmware abstraction layer for GSP-based NVIDIA GPUs. The Nova project, including nova-core and nova-drm, in the long term, is intended to serve as the successor of Nouveau for all GSP-based GPUs. The motivation for both, starting a successor project for Nouveau and doing so using the Rust programming language, is documented in detail through a previous post on the mailing list [1], an LWN article [2] and a talk from LPC '24. In order to avoid the chicken and egg problem to require a user to upstream Rust abstractions, but at the same time require the Rust abstractions to implement the driver, nova-core kicks off as a driver stub and is subsequently developed upstream. Link: https://lore.kernel.org/dri-devel/Zfsj0_tb-0-tNrJy@cassiopeiae/T/#u [1] Link: https://lwn.net/Articles/990736/ [2] Link: https://youtu.be/3Igmx28B3BQ?si=sBdSEer4tAPKGpOs [3] Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250306222336.23482-5-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-03-09rust: firmware: add `module_firmware!` macroDanilo Krummrich
Analogous to the `module!` macro `module_firmware!` adds additional firmware path strings to the .modinfo section. In contrast to `module!`, where path strings need to be string literals, path strings can be composed with the `firmware::ModInfoBuilder`. Some drivers require a lot of firmware files (such as nova-core) and hence benefit from more flexibility composing firmware path strings. Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20250306222336.23482-4-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-03-09rust: firmware: introduce `firmware::ModInfoBuilder`Danilo Krummrich
The `firmware` field of the `module!` only accepts literal strings, which is due to the fact that it is implemented as a proc macro. Some drivers require a lot of firmware files (such as nova-core) and hence benefit from more flexibility composing firmware path strings. The `firmware::ModInfoBuilder` is a helper component to flexibly compose firmware path strings for the .modinfo section in const context. It is meant to be used in combination with `kernel::module_firmware!`. Co-developed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250306222336.23482-3-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-03-09rust: module: add type `LocalModule`Danilo Krummrich
The `LocalModule` type is the type of the module created by `module!`, `module_pci_driver!`, `module_platform_driver!`, etc. Since the exact type of the module is sometimes generated on the fly by the listed macros, provide an alias. This is first used by the `module_firmware!` macro. Acked-by: Miguel Ojeda <ojeda@kernel.org> Suggested-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250306222336.23482-2-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-03-09Merge tag 'kvm-x86-fixes-6.14-rcN.2' of https://github.com/kvm-x86/linux ↵Paolo Bonzini
into HEAD KVM x86 fixes for 6.14-rcN #2 - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow. - Ensure DEBUGCTL is context switched on AMD to avoid running the guest with the host's value, which can lead to unexpected bus lock #DBs. - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly emulate BTF. KVM's lack of context switching has meant BTF has always been broken to some extent. - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest can enable DebugSwap without KVM's knowledge. - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO memory" phase without actually generating a write-protection fault. - Fix a printf() goof in the SEV smoke test that causes build failures with -Werror. - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2 isn't supported by KVM.
2025-03-09Merge tag 'kvmarm-fixes-6.14-4' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.14, take #4 - Fix a couple of bugs affecting pKVM's PSCI relay implementation when running in the hVHE mode, resulting in the host being entered with the MMU in an unknown state, and EL2 being in the wrong mode.
2025-03-08Merge tag 'mm-hotfixes-stable-2025-03-08-16-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "33 hotfixes. 24 are cc:stable and the remainder address post-6.13 issues or aren't considered necessary for -stable kernels. 26 are for MM and 7 are for non-MM. - "mm: memory_failure: unmap poisoned folio during migrate properly" from Ma Wupeng fixes a couple of two year old bugs involving the migration of hwpoisoned folios. - "selftests/damon: three fixes for false results" from SeongJae Park fixes three one year old bugs in the SAMON selftest code. The remainder are singletons and doubletons. Please see the individual changelogs for details" * tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits) mm/page_alloc: fix uninitialized variable rapidio: add check for rio_add_net() in rio_scan_alloc_net() rapidio: fix an API misues when rio_add_net() fails MAINTAINERS: .mailmap: update Sumit Garg's email address Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone" mm: fix finish_fault() handling for large folios mm: don't skip arch_sync_kernel_mappings() in error paths mm: shmem: remove unnecessary warning in shmem_writepage() userfaultfd: fix PTE unmapping stack-allocated PTE copies userfaultfd: do not block on locking a large folio with raised refcount mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages mm: shmem: fix potential data corruption during shmem swapin mm: fix kernel BUG when userfaultfd_move encounters swapcache selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms selftests/damon/damos_quota: make real expectation of quota exceeds include/linux/log2.h: mark is_power_of_2() with __always_inline NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback mm, swap: avoid BUG_ON in relocate_cluster() mm: swap: use correct step in loop to wait all clusters in wait_for_allocation() ...
2025-03-08Merge tag 'x86-urgent-2025-03-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more x86 fixes from Ingo Molnar: - Add more model IDs to the AMD microcode version check, more people are hitting these checks - Fix a Xen guest boot warning related to AMD northbridge setup - Fix SEV guest bugs related to a recent changes in its locking logic - Fix a missing definition of PTRS_PER_PMD that assembly builds can hit * tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/AMD: Add some forgotten models to the SHA check x86/mm: Define PTRS_PER_PMD for assembly code too virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex virt: sev-guest: Allocate request data dynamically x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
2025-03-08x86/microcode/AMD: Add some forgotten models to the SHA checkBorislav Petkov (AMD)
Add some more forgotten models to the SHA check. Fixes: 50cef76d5cb0 ("x86/microcode/AMD: Load only SHA256-checksummed patches") Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Link: https://lore.kernel.org/r/20250307220256.11816-1-bp@kernel.org
2025-03-08Merge branch 'linus' into x86/urgent, to pick up dependent patchesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-08Merge tag 'loongarch-fixes-6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix bugs in kernel build, hibernation, memory management and KVM" * tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Fix GPA size issue about VM LoongArch: KVM: Reload guest CSR registers after sleep LoongArch: KVM: Add interrupt checking for AVEC LoongArch: Set hugetlb mmap base address aligned with pmd size LoongArch: Set max_pfn with the PFN of the last page LoongArch: Use polling play_dead() when resuming from hibernation LoongArch: Eliminate superfluous get_numa_distances_cnt() LoongArch: Convert unreachable() to BUG()
2025-03-08LoongArch: KVM: Fix GPA size issue about VMBibo Mao
Physical address space is 48 bit on Loongson-3A5000 physical machine, however it is 47 bit for VM on Loongson-3A5000 system. Size of physical address space of VM is the same with the size of virtual user space (a half) of physical machine. Variable cpu_vabits represents user address space, kernel address space is not included (user space and kernel space are both a half of total). Here cpu_vabits, rather than cpu_vabits - 1, is to represent the size of guest physical address space. Also there is strict checking about page fault GPA address, inject error if it is larger than maximum GPA address of VM. Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-08LoongArch: KVM: Reload guest CSR registers after sleepBibo Mao
On host, the HW guest CSR registers are lost after suspend and resume operation. Since last_vcpu of boot CPU still records latest vCPU pointer so that the guest CSR register skips to reload when boot CPU resumes and vCPU is scheduled. Here last_vcpu is cleared so that guest CSR registers will reload from scheduled vCPU context after suspend and resume. Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-08LoongArch: KVM: Add interrupt checking for AVECBibo Mao
There is a newly added macro INT_AVEC with CSR ESTAT register, which is bit 14 used for LoongArch AVEC support. AVEC interrupt status bit 14 is supported with macro CSR_ESTAT_IS, so here replace the hard-coded value 0x1fff with macro CSR_ESTAT_IS so that the AVEC interrupt status is also supported by KVM. Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-08LoongArch: Set hugetlb mmap base address aligned with pmd sizeBibo Mao
With ltp test case "testcases/bin/hugefork02", there is a dmesg error report message such as: kernel BUG at mm/hugetlb.c:5550! Oops - BUG[#1]: CPU: 0 UID: 0 PID: 1517 Comm: hugefork02 Not tainted 6.14.0-rc2+ #241 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 pc 90000000004eaf1c ra 9000000000485538 tp 900000010edbc000 sp 900000010edbf940 a0 900000010edbfb00 a1 9000000108d20280 a2 00007fffe9474000 a3 00007ffff3474000 a4 0000000000000000 a5 0000000000000003 a6 00000000003cadd3 a7 0000000000000000 t0 0000000001ffffff t1 0000000001474000 t2 900000010ecd7900 t3 00007fffe9474000 t4 00007fffe9474000 t5 0000000000000040 t6 900000010edbfb00 t7 0000000000000001 t8 0000000000000005 u0 90000000004849d0 s9 900000010edbfa00 s0 9000000108d20280 s1 00007fffe9474000 s2 0000000002000000 s3 9000000108d20280 s4 9000000002b38b10 s5 900000010edbfb00 s6 00007ffff3474000 s7 0000000000000406 s8 900000010edbfa08 ra: 9000000000485538 unmap_vmas+0x130/0x218 ERA: 90000000004eaf1c __unmap_hugepage_range+0x6f4/0x7d0 PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) Process hugefork02 (pid: 1517, threadinfo=00000000a670eaf4, task=000000007a95fc64) Call Trace: [<90000000004eaf1c>] __unmap_hugepage_range+0x6f4/0x7d0 [<9000000000485534>] unmap_vmas+0x12c/0x218 [<9000000000494068>] exit_mmap+0xe0/0x308 [<900000000025fdc4>] mmput+0x74/0x180 [<900000000026a284>] do_exit+0x294/0x898 [<900000000026aa30>] do_group_exit+0x30/0x98 [<900000000027bed4>] get_signal+0x83c/0x868 [<90000000002457b4>] arch_do_signal_or_restart+0x54/0xfa0 [<90000000015795e8>] irqentry_exit_to_user_mode+0xb8/0x138 [<90000000002572d0>] tlb_do_page_fault_1+0x114/0x1b4 The problem is that base address allocated from hugetlbfs is not aligned with pmd size. Here add a checking for hugetlbfs and align base address with pmd size. After this patch the test case "testcases/bin/hugefork02" passes to run. This is similar to the commit 7f24cbc9c4d42db8a3c8484d1 ("mm/mmap: teach generic_get_unmapped_area{_topdown} to handle hugetlb mappings"). Cc: stable@vger.kernel.org # 6.13+ Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-08LoongArch: Set max_pfn with the PFN of the last pageBibo Mao
The current max_pfn equals to zero. In this case, it causes user cannot get some page information through /proc filesystem such as kpagecount. The following message is displayed by stress-ng test suite with command "stress-ng --verbose --physpage 1 -t 1". # stress-ng --verbose --physpage 1 -t 1 stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument) stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument) stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument) ... After applying this patch, the kernel can pass the test. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3) stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3) stress-ng: debug: [1700] physpage: [1701] terminated (success) Cc: stable@vger.kernel.org # 6.8+ Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-08LoongArch: Use polling play_dead() when resuming from hibernationHuacai Chen
When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue enabled, the idle_task's stack may different between the booting kernel and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the interrupt handler. But since the stack pointer is changed, the interrupt handler cannot restore correct context. So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it as the default version of play_dead(), and the new arch_cpu_idle_dead() call play_dead() directly. For hibernation, implement an arch-specific hibernate_resume_nonboot_cpu_disable() to use the polling version (idle instruction is replace by nop, and irq is disabled) of play_dead(), i.e. poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack when resuming from hibernation. This solution is a little similar to commit 406f992e4a372dafbe3c ("x86 / hibernate: Use hlt_play_dead() when resuming from hibernation"). Cc: stable@vger.kernel.org Tested-by: Erpeng Xu <xuerpeng@uniontech.com> Tested-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-08LoongArch: Eliminate superfluous get_numa_distances_cnt()Yuli Wang
In LoongArch, get_numa_distances_cnt() isn't in use, resulting in a compiler warning. Fix follow errors with clang-18 when W=1e: arch/loongarch/kernel/acpi.c:259:28: error: unused function 'get_numa_distances_cnt' [-Werror,-Wunused-function] 259 | static inline unsigned int get_numa_distances_cnt(struct acpi_table_slit *slit) | ^~~~~~~~~~~~~~~~~~~~~~ 1 error generated. Link: https://lore.kernel.org/all/Z7bHPVUH4lAezk0E@kernel.org/ Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-08LoongArch: Convert unreachable() to BUG()Tiezhu Yang
When compiling on LoongArch, there exists the following objtool warning in arch/loongarch/kernel/machine_kexec.o: kexec_reboot() falls through to next function crash_shutdown_secondary() Avoid using unreachable() as it can (and will in the absence of UBSAN) generate fall-through code. Use BUG() so we get a "break BRK_BUG" trap (with unreachable annotation). Cc: stable@vger.kernel.org # 6.12+ Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-07Merge tag 's390-6.14-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix return address recovery of traced function in ftrace to ensure reliable stack unwinding - Fix compiler warnings and runtime crashes of vDSO selftests on s390 by introducing a dedicated GNU hash bucket pointer with correct 32-bit entry size - Fix test_monitor_call() inline asm, which misses CC clobber, by switching to an instruction that doesn't modify CC * tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ftrace: Fix return address recovery of traced function selftests/vDSO: Fix GNU hash table entry size for s390x s390/traps: Fix test_monitor_call() inline assembly
2025-03-08dt-bindings: display/msm: dsi-controller-main: Add missing minItemsKrzysztof Kozlowski
Specific constrain in if:then: blocks for variable lists, like clocks and clock-names, should have a fixed upper and lower size. Older dtschema implied minItems, but that's not true since 2024 and missing minItems means that lower bound is not set. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/638751/ Link: https://lore.kernel.org/r/20250221-b4-sm8750-display-v3-2-3ea95b1630ea@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-08dt-bindings: display/msm: dsi-controller-main: Combine if:then: entriesKrzysztof Kozlowski
Several devices have the same clock inputs, thus they can be in the same if:then: clause, making everything smaller. No functional impact. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/638749/ Link: https://lore.kernel.org/r/20250221-b4-sm8750-display-v3-1-3ea95b1630ea@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-08drm/msm/dpu: drop wb2_formats_rgbDmitry Baryshkov
After enabling YUV support for writeback on a variety of DPU hardware, the wb2_formats_rgb is now unused. Drop it following the report of LKP. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202503071857.oZbQsPaE-lkp@intel.com/ Reviewed-by: Rob Clark <robdclark@gmail.com> # on IRC Patchwork: https://patchwork.freedesktop.org/patch/641848/ Link: https://lore.kernel.org/r/20250308-dpu-drop-wb2-rgb-v1-1-f5503fcd1bc2@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-08drm/msm/dpu: Fix uninitialized variable in dpu_crtc_kickoff_clone_mode()Dan Carpenter
After the loop there is a check for whether "wb_encoder" has been set to non-NULL, however it was never set to NULL. Initialize it to NULL. Fixes: ad06972d5365 ("drm/msm/dpu: Reorder encoder kickoff for CWB") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/641631/ Link: https://lore.kernel.org/r/f8ba03dc-0f90-4781-8d54-c16b3251ecb1@stanley.mountain Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-08drm/msm/dpu: correct struct dpu_encoder_virt docsDmitry Baryshkov
Fix a typo in struct dpu_encoder_virt kerneldoc, which made it ignore description of the cwb_mask field. Fixes: dd331404ac7c ("drm/msm/dpu: Configure CWB in writeback encoder") Signed-off-by: Dmitry Baryshkov <lumag@kernel.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/641315/ Link: https://lore.kernel.org/r/20250306-dpu-fix-docs-v1-2-e51b71e8ad84@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-08drm/msm/dpu: correct dpu_crtc_check_mode_changed docsDmitry Baryshkov
Correct commit 20972609d12c ("drm/msm/dpu: Require modeset if clone mode status changes") and describe old_crtc_state and new_crtc_state params instead of the single previously used parameter crtc_state. Fixes: 20972609d12c ("drm/msm/dpu: Require modeset if clone mode status changes") Signed-off-by: Dmitry Baryshkov <lumag@kernel.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/641313/ Link: https://lore.kernel.org/r/20250306-dpu-fix-docs-v1-1-e51b71e8ad84@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-08x86/mm: Define PTRS_PER_PMD for assembly code tooIngo Molnar
Andy reported the following build warning from head_32.S: In file included from arch/x86/kernel/head_32.S:29: arch/x86/include/asm/pgtable_32.h:59:5: error: "PTRS_PER_PMD" is not defined, evaluates to 0 [-Werror=undef] 59 | #if PTRS_PER_PMD > 1 The reason is that on 2-level i386 paging the folded in PMD's PTRS_PER_PMD constant is not defined in assembly headers, only in generic MM C headers. Instead of trying to fish out the definition from the generic headers, just define it - it even has a comment for it already... Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/Z8oa8AUVyi2HWfo9@gmail.com
2025-03-07Merge tag 'slab-for-6.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fix from Vlastimil Babka: - Stable fix for kmem_cache_destroy() called from a WQ_MEM_RECLAIM workqueue causing a warning due to the new kvfree_rcu_barrier() (Uladzislau Rezki) * tag 'slab-for-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab/kvfree_rcu: Switch to WQ_MEM_RECLAIM wq
2025-03-07Merge tag 'acpi-6.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Restore the previous behavior of the ACPI platform_profile sysfs interface that has been changed recently in a way incompatible with the existing user space (Mario Limonciello)" * tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: platform/x86/amd: pmf: Add balanced-performance to hidden choices platform/x86/amd: pmf: Add 'quiet' to hidden choices ACPI: platform_profile: Add support for hidden choices
2025-03-07Merge tag 'execve-v6.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull core dumping fix from Kees Cook: - Only sort VMAs when core_sort_vma sysctl is set * tag 'execve-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: coredump: Only sort VMAs when core_sort_vma sysctl is set
2025-03-07Merge tag 'for-6.14-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix leaked extent map after error when reading chunks - replace use of deprecated strncpy - in zoned mode, fixed range when ulocking extent range, causing a hang * tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix a leaked chunk map issue in read_one_chunk() btrfs: replace deprecated strncpy() with strscpy() btrfs: zoned: fix extent range end unlock in cow_file_range()
generated by cgit (git 2.34.1) at 2025-09-13 19:43:38 +0000