summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-01Merge branch 'mana-misc'David S. Miller
Dexuan Cui says: ==================== net: mana: some misc patches Patch 1 is a small fix. Patch 2 reports OS info to the PF driver. Before the patch, the req fields were all zeros. Patch 3 fixes and cleans up the error handling of HWC creation failure. Patch 4 adds the callbacks for hibernation/kexec. It's based on patch 3. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01net: mana: Support hibernation and kexecDexuan Cui
Implement the suspend/resume/shutdown callbacks for hibernation/kexec. Add mana_gd_setup() and mana_gd_cleanup() for some common code, and use them in the mand_gd_* callbacks. Reuse mana_probe/remove() for the hibernation path. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01net: mana: Improve the HWC error handlingDexuan Cui
Currently when the HWC creation fails, the error handling is flawed, e.g. if mana_hwc_create_channel() -> mana_hwc_establish_channel() fails, the resources acquired in mana_hwc_init_queues() is not released. Enhance mana_hwc_destroy_channel() to do the proper cleanup work and call it accordingly. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01net: mana: Report OS info to the PF driverDexuan Cui
The PF driver might use the OS info for statistical purposes. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01net: mana: Fix the netdev_err()'s vPort argument in mana_init_port()Dexuan Cui
Use the correct port index rather than 0. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge branch 'mptcp-selftests'David S. Miller
Mat Martineau says: ==================== mptcp: Some selftest improvements Here are a couple of selftest changes for MPTCP. Patch 1 fixes a mistake where the wrong protocol (TCP vs MPTCP) could be requested on the listening socket in some link failure tests. Patch 2 refactors the simulataneous flow tests to improve timing accuracy and give more consistent results. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01selftests: mptcp: more stable simult_flows testsPaolo Abeni
Currently the simult_flows.sh self-tests are not very stable, especially when running on slow VMs. The tests measure runtime for transfers on multiple subflows and check that the time is near the theoretical maximum. The current test infra introduces a bit of jitter in test runtime, due to multiple explicit delays. Additionally the runtime is measured by the shell script wrapper. On a slow VM, the script overhead is measurable and subject to relevant jitter. One solution to make the test more stable would be adding more slack to the expected time; that could possibly hide real regressions. Instead move the measurement inside the command doing the transfer, and drop most unneeded sleeps. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01selftests: mptcp: fix proto type in link_failure testsGeliang Tang
In listener_ns, we should pass srv_proto argument to mptcp_connect command, not cl_proto. Fixes: 7d1e6f1639044 ("selftests: mptcp: add testcase for active-back") Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01ibmvnic: delay complete()Sukadev Bhattiprolu
If we get CRQ_INIT, we set errno to -EIO and first call complete() to notify the waiter. Then we try to schedule a FAILOVER reset. If this occurs while adapter is in PROBING state, ibmvnic_reset() changes the error code to EAGAIN and returns without scheduling the FAILOVER. The purpose of setting error code to EAGAIN is to ask the waiter to retry. But due to the earlier complete() call, the waiter may already have seen the -EIO response and decided not to retry. This can cause intermittent failures when bringing up ibmvnic adapters during boot, specially in in kexec/kdump kernels. Defer the complete() call until after scheduling the reset. Also streamline the error code to EAGAIN. Don't see why we need EIO sometimes. All 3 callers of ibmvnic_reset_init() can handle EAGAIN. Fixes: 17c8705838a5 ("ibmvnic: Return error code if init interrupted by transport event") Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01ibmvnic: Process crqs after enabling interruptsSukadev Bhattiprolu
Soon after registering a CRQ it is possible that we get a fail over or maybe a CRQ_INIT from the VIOS while interrupts were disabled. Look for any such CRQs after enabling interrupts. Otherwise we can intermittently fail to bring up ibmvnic adapters during boot, specially in kexec/kdump kernels. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01ibmvnic: don't stop queue in xmitSukadev Bhattiprolu
If adapter's resetting bit is on, discard the packet but don't stop the transmit queue - instead leave that to the reset code. With this change, it is possible that we may get several calls to ibmvnic_xmit() that simply discard packets and return. But if we stop the queue here, we might end up doing so just after __ibmvnic_open() started the queues (during a hard/soft reset) and before the ->resetting bit was cleared. If that happens, there will be no one to restart queue and transmissions will be blocked indefinitely. This can cause a TIMEOUT reset and with auto priority failover enabled, an unnecessary FAILOVER reset to less favored backing device and then a FAILOVER back to the most favored backing device. If we hit the window repeatedly, we can get stuck in a loop of TIMEOUT, FAILOVER, FAILOVER resets leaving the adapter unusable for extended periods of time. Fixes: 7f5b030830fe ("ibmvnic: Free skb's in cases of failure in transmit") Reported-by: Abdul Haleem <abdhalee@in.ibm.com> Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge branch 'SO_MARK-routing'David S. Miller
Jakub Kicinski says: ==================== udp6: allow SO_MARK ctrl msg to affect routing Looks like SO_MARK from cmsg does not affect routing policy. This seems accidental. I opted for net because of the discrepancy between IPv4 and IPv6, but it never worked and doesn't cause crashes.. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01selftests: udp: test for passing SO_MARK as cmsgJakub Kicinski
Before fix: | Case IPv6 rejection returned 0, expected 1 |FAIL - 1/4 cases failed With the fix: | OK Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01udp6: allow SO_MARK ctrl msg to affect routingJakub Kicinski
Commit c6af0c227a22 ("ip: support SO_MARK cmsg") added propagation of SO_MARK from cmsg to skb->mark. For IPv4 and raw sockets the mark also affects route lookup, but in case of IPv6 the flow info is initialized before cmsg is parsed. Fixes: c6af0c227a22 ("ip: support SO_MARK cmsg") Reported-and-tested-by: Xintong Hu <huxintong@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01nfp: flower: Allow ipv6gretap interface for offloadingYu Xiao
The tunnel_type check only allows for "netif_is_gretap", but for OVS the port is actually "netif_is_ip6gretap" when setting up GRE for ipv6, which means offloading request was rejected before. Therefore, adding "netif_is_ip6gretap" allow ipv6gretap interface for offloading. Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01net: dsa: populate supported_interfaces memberMarek Behún
Add a new DSA switch operation, phylink_get_interfaces, which should fill in which PHY_INTERFACE_MODE_* are supported by given port. Use this before phylink_create() to fill phylinks supported_interfaces member, allowing phylink to determine which PHY_INTERFACE_MODEs are supported. Signed-off-by: Marek Behún <kabel@kernel.org> [tweaked patch and description to add more complete support -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-10-29 This series contains updates to ice and iavf drivers and virtchnl header file. Brett removes vlan_promisc argument from a function call for ice driver. In the virtchnl header file he removes an unused, reserved define and converts raw value defines to instead use the BIT macro. Marcin adds syncing of MAC addresses when creating switchdev VFs to remove error messages on link up and stops showing buffer information for port representors to remove duplicated entries being displayed for ice driver. Karen introduces a helper to go from pci_dev to iavf_adapter in the iavf driver. Przemyslaw fixes an issue where iavf was attempting to free IRQs before calling disable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2021-10-30 Just two minor changes this time: 1) Remove some superfluous header files from xfrm4_tunnel.c From Mianhan Liu. 2) Simplify some error checks in xfrm_input(). From luo penghao. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Use array_size() in ebtables, from Gustavo A. R. Silva. 2) Attach IPS_ASSURED to internal UDP stream state, reported by Maciej Zenczykowski. 3) Add NFT_META_IFTYPE to match on the interface type either from ingress or egress. 4) Generalize pktinfo->tprot_set to flags field. 5) Allow to match on inner headers / payload data. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge tag 'mlx5-updates-2021-10-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-10-29 1) Minor trivial refactoring and improvements 2) Check for unsupported parameters fields in SW steering 3) Support TC offload for OVS internal port, from Ariel, see below. Ariel Levkovich says: ===================== Support HW offload of TC rules involving OVS internal port device type as the filter device or the destination device. The support is for flows which explicitly use the internal port as source or destination device as well as indirect offload for flows performing tunnel set or unset via a tunnel device and the internal port is the tunnel overlay device. Since flows with internal port as source port are added as egress rules while redirecting to internal port is done as an ingress redirect, the series introduces the necessary changes in mlx5_core driver to support the new types of flows and actions. ===================== ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01parisc: Fix set_fixmap() on PA1.x CPUsHelge Deller
Fix a kernel crash which happens on PA1.x CPUs while initializing the FTRACE/KPROBE breakpoints. The PTE table entries for the fixmap area were not created correctly. Signed-off-by: Helge Deller <deller@gmx.de> Fixes: ccfbc68d41c2 ("parisc: add set_fixmap()/clear_fixmap()") Cc: stable@vger.kernel.org # v5.2+
2021-11-01parisc: Use swap() to swap values in setup_bootmem()Yihao Han
Signed-off-by: Yihao Han <hanyihao@vivo.com> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01netfilter: nft_payload: support for inner header matching / manglingPablo Neira Ayuso
Allow to match and mangle on inner headers / payload data after the transport header. There is a new field in the pktinfo structure that stores the inner header offset which is calculated only when requested. Only TCP and UDP supported at this stage. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-11-01netfilter: nf_tables: convert pktinfo->tprot_set to flags fieldPablo Neira Ayuso
Generalize boolean field to store more flags on the pktinfo structure. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-11-01netfilter: nft_meta: add NFT_META_IFTYPEPablo Neira Ayuso
Generalize NFT_META_IIFTYPE to NFT_META_IFTYPE which allows you to match on the interface type of the skb->dev field. This field is used by the netdev family to add an implicit dependency to skip non-ethernet packets when matching on layer 3 and 4 TCP/IP header fields. For backward compatibility, add the NFT_META_IIFTYPE alias to NFT_META_IFTYPE. Add __NFT_META_IIFTYPE, to be used by userspace in the future to match specifically on the iiftype. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-11-01netfilter: conntrack: set on IPS_ASSURED if flows enters internal stream statePablo Neira Ayuso
The internal stream state sets the timeout to 120 seconds 2 seconds after the creation of the flow, attach this internal stream state to the IPS_ASSURED flag for consistent event reporting. Before this patch: [NEW] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED] [DESTROY] udp 17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED] Note IPS_ASSURED for the flow not yet in the internal stream state. after this update: [NEW] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [UPDATE] udp 17 120 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED] [DESTROY] udp 17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED] Before this patch, short-lived UDP flows never entered IPS_ASSURED, so they were already candidate flow to be deleted by early_drop under stress. Before this patch, IPS_ASSURED is set on regardless the internal stream state, attach this internal stream state to IPS_ASSURED. packet #1 (original direction) enters NEW state packet #2 (reply direction) enters ESTABLISHED state, sets on IPS_SEEN_REPLY paclet #3 (any direction) sets on IPS_ASSURED (if 2 seconds since the creation has passed by). Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-11-01parisc: Update defconfigsHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: decompressor: clean up MakefileMasahiro Yamada
Do not list the same objects in 'OBJECTS' and 'targets'. Instead, add $(OBJECTS) to 'targets'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: decompressor: remove repeated depenency of misc.oMasahiro Yamada
The same dependency $(obj)/misc.o: $(obj)/sizes.h ... appears twice, at line 29 and line 55 in this Makefile. Remove the second one. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Remove unused constants from asm-offsets.cHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc/ftrace: use static key to enable/disable function graph tracerSven Schnelle
This avoids using dereference_function_descriptor in the ftrace code path, and it's also faster. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc/ftrace: set function trace functionSven Schnelle
With DYNAMIC_FTRACE, we need to implement ftrace_update_trace_func and not call ftrace_trace_function() directly, as ftrace doesn't expect calls to this function during code patching. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Make use of the helper macro kthread_run()Cai Huoqing
Replace kthread_create/wake_up_process() with kthread_run() to simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: mark xchg functions notraceSven Schnelle
tracing the xchg functions leads to recursion in various places. Therefore mark the function as notrace. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: enhance warning regarding usage of O_NONBLOCKHelge Deller
Instead of showing only the very first application which needs recompile, show all of them, but print them only once. Includes typo fix noticed by Colin Ian King. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
2021-11-01parisc: Drop ifdef __KERNEL__ from non-uapi kernel headersHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Use PRIV_USER and PRIV_KERNEL in ptrace.hHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Use PRIV_USER in syscall.SHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc/kgdb: add kgdb_roundup() to make kgdb work with idle pollingSven Schnelle
With idle polling, IPIs are not sent when a CPU idle, but queued and run later from do_idle(). The default kgdb_call_nmi_hook() implementation gets the pointer to struct pt_regs from get_irq_reqs(), which doesn't work in that case because it was not called from the IPI interrupt handler. Fix it by defining our own kgdb_roundup() function which sents an IPI_ENTER_KGDB. When that IPI is received on the target CPU kgdb_nmicallback() is called. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Move thread_info into task structHelge Deller
This implements the CONFIG_THREAD_INFO_IN_TASK option. With this change: - before thread_info was part of the stack and located at the beginning of the stack - now the thread_info struct is moved and located inside the task_struct structure - the stack is allocated and handled like the major other platforms - drop the cpu field of thread_info and use instead the one in task_struct Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sven Schnelle <svens@stackframe.org>
2021-11-01parisc: add support for TOC (transfer of control)Sven Schnelle
Almost all PA-RISC machines have either a button that is labeled with 'TOC' or a BMC function to trigger a TOC. TOC is a non-maskable interrupt that is sent to the processor. This can be used for diagnostic purposes like obtaining a stack trace/register dump or to enter KDB/KGDB. As an example, on my c8000, TOC can be used with: CONFIG_KGDB=y CONFIG_KGDB_KDB=y and the 'kgdboc=ttyS0,115200' appended to the command line. Press ^[( on serial console, which will enter the BMC command line, and enter 'TOC s': root@(none):/# ( cli>TOC s Sending TOC/INIT. <Cpu3> 2800035d03e00000 0000000040c21ac8 CC_ERR_CHECK_TOC <Cpu0> 2800035d00e00000 0000000040c21ad0 CC_ERR_CHECK_TOC <Cpu2> 2800035d02e00000 0000000040c21ac8 CC_ERR_CHECK_TOC <Cpu1> 2800035d01e00000 0000000040c21ad0 CC_ERR_CHECK_TOC <Cpu3> 37000f7303e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu0> 37000f7300e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> 37000f7302e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu1> 37000f7301e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu3> 4300100803e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC <Cpu0> 4300100800e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC <Cpu2> 4300100802e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC <Cpu1> 4300100801e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC Entering kdb (current=0x00000000411cef80, pid 0) on processor 0 due to NonMaskable Interrupt @ 0x40c21ad0 [0]kdb> Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc/firmware: add functions to retrieve TOC dataSven Schnelle
Add functions to retrieve TOC data from firmware both for 1.1 and 2.0 PDC. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: add PIM TOC data structuresSven Schnelle
These data structures describe the TOC data we get from firmware when issuing a PDC_PIM_TOC request. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: move virt_map macro to assembly.hSven Schnelle
This macro will also be used by the TOC code, so move it into asm/assembly.h to avoid duplication. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc/unwind: fix unwinder when CONFIG_64BIT is enabledSven Schnelle
With 64 bit kernels unwind_special() is not working because it compares the pc to the address of the function descriptor. Add a helper function that compares pc with the dereferenced address. This fixes all of the backtraces on my c8000. Without this changes, a lot of backtraces are missing in kdb or the show-all-tasks command from /proc/sysrq-trigger. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Fix ptrace check on syscall returnHelge Deller
The TIF_XXX flags are stored in the flags field in the thread_info struct (TI_FLAGS), not in the flags field of the task_struct structure (TASK_FLAGS). It seems this bug didn't generate any important side-effects, otherwise it wouldn't have went unnoticed for 12 years (since v2.6.32). Signed-off-by: Helge Deller <deller@gmx.de> Fixes: ecd3d4bc06e48 ("parisc: stop using task->ptrace for {single,block}step flags") Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: stable@vger.kernel.org
2021-11-01exfat: fix incorrect loading of i_blocks for large filesSungjong Seo
When calculating i_blocks, there was a mistake that was masked with a 32-bit variable. So i_blocks for files larger than 4 GiB had incorrect values. Mask with a 64-bit variable instead of 32-bit one. Fixes: 5f2aa075070c ("exfat: add inode operations") Cc: stable@vger.kernel.org # v5.7+ Reported-by: Ganapathi Kamath <hgkamath@hotmail.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
2021-10-31Linux 5.15v5.15Linus Torvalds
2021-10-31Merge tag 'perf-tools-fixes-for-v5.15-2021-10-31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix compilation of callchain related code on powerpc with gcc11+ - Fix PERF_SAMPLE_WEIGHT_STRUCT support in 'perf script' - Check session->header.env.arch before using it, fixing a segmentation fault - Suppress 'rm dlfilter' build messages * tag 'perf-tools-fixes-for-v5.15-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf script: Fix PERF_SAMPLE_WEIGHT_STRUCT support perf callchain: Fix compilation on powerpc with gcc11+ perf script: Check session->header.env.arch before using it perf build: Suppress 'rm dlfilter' build message
2021-10-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: - Fixes for s390 interrupt delivery - Fixes for Xen emulator bugs showing up as debug kernel WARNs - Fix another issue with SEV/ES string I/O VMGEXITs * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Take srcu lock in post_kvm_run_save() KVM: SEV-ES: fix another issue with string I/O VMGEXITs KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block() KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlock KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu KVM: s390: clear kicked_mask before sleeping again
generated by cgit (git 2.34.1) at 2025-09-11 03:06:06 +0000