| Age | Commit message (Collapse) | Author |
|---|
|
All callers of can_nocow_extent() now pass a value of false for its
'strict' argument, making it redundant. So remove the argument from
can_nocow_extent() as well as can_nocow_file_extent(),
btrfs_cross_ref_exist() and check_committed_ref(), because this
argument was used just to influence the behavior of check_committed_ref().
Also remove the 'strict' field from struct can_nocow_file_extent_args,
which is now always false as well, as its value is taken from the
argument to can_nocow_extent().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove the variable length in btrfs_insert_one_raid_extent() as it is
unused.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a recent ML report that mounting a large fs backed by hardware
RAID56 controller (with one device missing) took too much time, and
systemd seems to kill the mount attempt.
In that case, the only error message is:
BTRFS error (device sdj): open_ctree failed
There is no reason on why the failure happened, making it very hard to
understand the reason.
At least output the error number (in the particular case it should be
-EINTR) to provide some clue.
Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Cc: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_copy_from_user() handles the folio dirtying for
buffered write. The original design is to allow that function to handle
multiple folios, but since commit c87c299776e4 ("btrfs: make buffered
write to copy one page a time") there is no need to support multiple
folios.
So here open-code btrfs_copy_from_user() to
copy_folio_from_iter_atomic() and flush_dcache_folio() calls.
The short-copy check and revert are still kept as-is.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[WARNING]
There are several warnings about the recently introduced qgroup
auto-removal that it triggers WARN_ON() for the non-zero rfer/excl
numbers, e.g:
------------[ cut here ]------------
WARNING: CPU: 67 PID: 2882 at fs/btrfs/qgroup.c:1854 btrfs_remove_qgroup+0x3df/0x450
CPU: 67 UID: 0 PID: 2882 Comm: btrfs-cleaner Kdump: loaded Not tainted 6.11.6-300.fc41.x86_64 #1
RIP: 0010:btrfs_remove_qgroup+0x3df/0x450
Call Trace:
<TASK>
btrfs_qgroup_cleanup_dropped_subvolume+0x97/0xc0
btrfs_drop_snapshot+0x44e/0xa80
btrfs_clean_one_deleted_snapshot+0xc3/0x110
cleaner_kthread+0xd8/0x130
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device sda): to be deleted qgroup 0/319 has non-zero numbers, rfer 258478080 rfer_cmpr 258478080 excl 0 excl_cmpr 0
[CAUSE]
Although the root cause is still unclear, as if qgroup is consistent a
fully dropped subvolume (with extra transaction committed) should lead
to all zero numbers for the qgroup.
My current guess is the subvolume drop triggered the new subtree drop
threshold thus marked qgroup inconsistent, then rescan cleared it but
some corner case is not properly handled during subvolume dropping.
But at least for this particular case, since it's only the rfer/excl not
properly reset to 0, and qgroup is already marked inconsistent, there is
nothing to be worried for the end users.
The user space tool utilizing qgroup would queue a rescan to handle
everything, so the kernel wanring is a little overkilled.
[ENHANCEMENT]
Enhance the warning inside btrfs_remove_qgroup() by:
- Only do WARN() if CONFIG_BTRFS_DEBUG is enabled
As explained the kernel can handle inconsistent qgroups by simply do a
rescan, there is nothing to bother the end users.
- Treat the reserved space leak the same as non-zero numbers
By outputting the values and trigger a WARN() if it's a debug build.
So far I haven't experienced any case related to reserved space so I
hope we will never need to bother them.
Fixes: 839d6ea4f86d ("btrfs: automatically remove the subvolume qgroup")
Link: https://github.com/kdave/btrfs-progs/issues/922
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We don't ever look at this list, remove it.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Before we were keeping all of our nodes on various lists in order to
make sure everything got cleaned up correctly. We used node->lowest to
indicate that node->lower was linked into the cache->leaves list. Now
that we do cleanup based on the rb-tree both the list and the flag are
useless, so delete them both.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We rely on finding all our nodes on the various lists in the backref
cache, when they are all also in the rbtree. Instead just search
through the rbtree and free everything.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we handle relocation for non-shareable roots without using the
backref cache, remove the ->cowonly field from the backref nodes and
update the handling to throw an error.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We already determine the owner for any blocks we find when we're
relocating, and for COW-only blocks (and the data reloc tree) we COW
down to the block and call it good enough. However we still build a
whole backref tree for them, even though we're not going to use it, and
then just don't put these blocks in the cache.
Rework the code to check if the block belongs to a COW-only root or the
data reloc root, and then just cow down to the block, skipping the
backref cache generation.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we no longer maintain backref cache across transactions, and this
is only called when we're creating the reloc root for a newly created
snapshot in the transaction critical section, we will end up doing a
bunch of work that will just get thrown away when we start the
transaction in the relocation loop. Delete this code as it no longer
does anything for us.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have this setup as a loop, but in reality we will never walk back up
the backref tree, if we do then it's a bug. Get rid of the loop and
handle the case where we have node->new_bytenr set at all. Previous
check was only if node->new_bytenr != root->node->start, but if it did
then we would hit the WARN_ON() and walk back up the tree.
Instead we want to just return error if ->new_bytenr is set, and then do
the normal updating of the node for the reloc root and carry on.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a comment for this field so we know what it is used for. Previously
we used it to update the backref cache, so people may mistakenly think
it is useless, but in fact exists to make sure the backref cache makes
sense.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we're not updating the backref cache when we switch transids we
can remove the changed list.
We're going to keep the new_bytenr field because it serves as a good
sanity check for the backref cache and relocation, and can prevent us
from making extent tree corruption worse.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This BUG_ON is meant to catch backref cache problems, but these can
arise from either bugs in the backref cache or corruption in the extent
tree. Fix it to be a proper error.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_drop_extents()
A data race occurs when the function `insert_ordered_extent_file_extent()`
and the function `btrfs_inode_safe_disk_i_size_write()` are executed
concurrently. The function `insert_ordered_extent_file_extent()` is not
locked when reading inode->disk_i_size, causing
`btrfs_inode_safe_disk_i_size_write()` to cause data competition when
writing inode->disk_i_size, thus affecting the value of `modify_tree`.
The specific call stack that appears during testing is as follows:
============DATA_RACE============
btrfs_drop_extents+0x89a/0xa060 [btrfs]
insert_reserved_file_extent+0xb54/0x2960 [btrfs]
insert_ordered_extent_file_extent+0xff5/0x1760 [btrfs]
btrfs_finish_one_ordered+0x1b85/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
============OTHER_INFO============
btrfs_inode_safe_disk_i_size_write+0x4ec/0x600 [btrfs]
btrfs_finish_one_ordered+0x24c7/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
=================================
The main purpose of the check of the inode's disk_i_size is to avoid
taking write locks on a btree path when we have a write at or beyond
EOF, since in these cases we don't expect to find extent items in the
root to drop. However if we end up taking write locks due to a data
race on disk_i_size, everything is still correct, we only add extra
lock contention on the tree in case there's concurrency from other tasks.
If the race causes us to not take write locks when we actually need them,
then everything is functionally correct as well, since if we find out we
have extent items to drop and we took read locks (modify_tree set to 0),
we release the path and retry again with write locks.
Since this data race does not affect the correctness of the function,
it is a harmless data race, use data_race() to check inode->disk_i_size.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Hao-ran Zheng <zhenghaoran154@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_drop_extents() calls BUG_ON() in case the counter of to be deleted
extents is greater than 0. But all of these code paths can handle errors,
so there's no need to crash the kernel. Instead WARN() that the condition
has been met and gracefully bail out.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On the zoned mode, once used and freed region is still not reusable after the
freeing. The underlying zone needs to be reset before reusing. Btrfs resets a
zone when it removes a block group, and then new block group is allocated on
the zones to reuse the zones. But, it is sometime too late to catch up with a
write side.
This commit introduces a new space-info reclaim method ZONE_RESET. That will
pick a block group from the unused list and reset its zone to reuse the
zone_unusable space. It is faster than removing the block group and re-creating
a new block group on the same zones.
For the first implementation, the ZONE_RESET is only applied to a block group
whose region is fully zone_unusable. Reclaiming partial zone_unusable block
group could be implemented later.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit e1e577aafe41 ("btrfs: store fs_info in space_info"), we have
the fs_info in a space_info. So, we can drop fs_info argument from
btrfs_update_space_info_*. There is no behavior change.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Factor out a part of unpin_extent_range() that returns space back to the
space info, prioritizing global block reserve. Also, move the "len"
variable into the loop to clarify we don't need to carry it beyond an
iteration.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit 146054090b08 ("btrfs: initial fsverity support") introduced
fs-verity support for btrfs, but didn't add support for
FS_IOC_READ_VERITY_METADATA to directly query the Merkle tree,
descriptor and signature blocks for fs-verity enabled files.
Add the (trival) implementation: we just need to wire it through to the
fs-verity code, the same way as is done in the other two filesystems
which support this ioctl (ext4, f2fs). The fs-verity code already has
access to the required data.
This is also safe to backport to older stable trees (5.15+) if needed.
Signed-off-by: Allison Karlitskaya <allison.karlitskaya@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The variable ret is being initialized to zero and also later re-assigned
to zero. In both cases the assignment is redundant since the value is
never read after the assignment and hence they can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_get_extent() will only return an PTR_ERR() or a valid
extent map pointer. It will not return NULL.
Thus the usage of PTR_ERR_OR_ZERO() inside submit_one_sector() is not
needed, use plain PTR_ERR() instead, and that is the only usage of
PTR_ERR_OR_ZERO() after btrfs_get_extent().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The recent fix for a stupid mistake I made uncovered the fact that we
don't have adequate testing in the delayed refs code, as it took a
pretty extensive and long running stress test to uncover something that
a unit test would have uncovered right away.
Fix this by adding a delayed refs self test suite. This will validate
that the btrfs_ref transformation does the correct thing, that we do the
correct thing when merging delayed refs, and that we get the delayed
refs in the order that we expect. These are all crucial to how the
delayed refs operate.
I introduced various bugs (including the original bug) into the delayed
refs code to validate that these tests caught all of the shenanigans
that I could think of.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This helper is how we select the delayed ref to run once we've selected
the delayed ref head. I need this exported to add a unit test for
delayed refs, and it's more natural home is in delayed-ref.c. Rename it
to btrfs_select_delayed_ref and move it into delayed-ref.c.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When running hackbench in a cgroup with bandwidth throttling enabled,
following PSI splat was observed:
psi: inconsistent task state! task=1831:hackbench cpu=8 psi_flags=14 clear=0 set=4
When investigating the series of events leading up to the splat,
following sequence was observed:
[008] d..2.: sched_switch: ... ==> next_comm=hackbench next_pid=1831 next_prio=120
...
[008] dN.2.: dequeue_entity(task delayed): task=hackbench pid=1831 cfs_rq->throttled=0
[008] dN.2.: pick_task_fair: check_cfs_rq_runtime() throttled cfs_rq on CPU8
# CPU8 goes into newidle balance and releases the rq lock
...
# CPU15 on same LLC Domain is trying to wakeup hackbench(pid=1831)
[015] d..4.: psi_flags_change: psi: task state: task=1831:hackbench cpu=8 psi_flags=14 clear=0 set=4 final=14 # Splat (cfs_rq->throttled=1)
[015] d..4.: sched_wakeup: comm=hackbench pid=1831 prio=120 target_cpu=008 # Task has woken on a throttled hierarchy
[008] d..2.: sched_switch: prev_comm=hackbench prev_pid=1831 prev_prio=120 prev_state=S ==> ...
psi_dequeue() relies on psi_sched_switch() to set the correct PSI flags
for the blocked entity, however, with the introduction of DELAY_DEQUEUE,
the block task can wakeup when newidle balance drops the runqueue lock
during __schedule().
If a task wakes before psi_sched_switch() adjusts the PSI flags, skip
any modifications in psi_enqueue() which would still see the flags of a
running task and not a blocked one. Instead, rely on psi_sched_switch()
to do the right thing.
Since the status returned by try_to_block_task() may no longer be true
by the time schedule reaches psi_sched_switch(), check if the task is
blocked or not using a combination of task_on_rq_queued() and
p->se.sched_delayed checks.
[ prateek: Commit message, testing, early bailout in psi_enqueue() ]
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue") # 1a6151017ee5
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Link: https://lore.kernel.org/r/20241227061941.2315-1-kprateek.nayak@amd.com
|
|
sched_clock_irqtime may be disabled due to the clock source. When disabled,
irq_time_read() won't change over time, so there is nothing to account. We
can save iterating the whole hierarchy on every tick and context switch.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20250103022409.2544-4-laoar.shao@gmail.com
|
|
sched_clock_irqtime may be disabled due to the clock source, in which case
IRQ time should not be accounted. Let's add a conditional check to avoid
unnecessary logic.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250103022409.2544-3-laoar.shao@gmail.com
|
|
Since CPU time accounting is a performance-critical path, let's define
sched_clock_irqtime as a static key to minimize potential overhead.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250103022409.2544-2-laoar.shao@gmail.com
|
|
Only set sg_overloaded when computing sg_lb_stats() at the highest sched
domain since rd->overloaded status is updated only when load balancing
at the highest domain. While at it, move setting of sg_overloaded below
idle_cpu() check since an idle CPU can never be overloaded.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20241223043407.1611-8-kprateek.nayak@amd.com
|
|
Aggregate nr_numa_running and nr_preferred_running when load balancing
at NUMA domains only. While at it, also move the aggregation below the
idle_cpu() check since an idle CPU cannot have any preferred tasks.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20241223043407.1611-7-kprateek.nayak@amd.com
|
|
x86_sched_itmt_flags() returns SD_ASYM_PACKING if ITMT support is
enabled by the system. Without ITMT support being enabled, it returns 0
similar to current x86_die_flags() on non-Hybrid systems
(!X86_HYBRID_CPU and !X86_FEATURE_AMD_HETEROGENEOUS_CORES)
On Intel systems that enable ITMT support, either the MC domain
coincides with the PKG domain, or in case of multiple MC groups
within a PKG domain, either Sub-NUMA Cluster (SNC) is enabled or the
processor features Hybrid core layout (X86_HYBRID_CPU) which leads to
three distinct possibilities:
o If PKG and MC domains coincide, PKG domain is degenerated by
sd_parent_degenerate() when building sched domain topology.
o If SNC is enabled, PKG domain is never added since
"x86_has_numa_in_package" is set and the topology will instead contain
NODE and NUMA domains.
o On X86_HYBRID_CPU which contains multiple MC groups within the PKG,
the PKG domain requires x86_sched_itmt_flags().
Thus, on Intel systems that contains multiple MC groups within the PKG
and enables ITMT support, the PKG domain requires
x86_sched_itmt_flags(). In all other cases PKG domain is either never
added or is degenerated. Thus, returning x86_sched_itmt_flags()
unconditionally at PKG domain on Intel systems should not lead to any
functional changes.
On AMD systems with multiple LLCs (MC groups) within a PKG domain,
enabling ITMT support requires setting SD_ASYM_PACKING to the PKG domain
since the core rankings are assigned PKG-wide.
Core rankings on AMD processors is currently set by the amd-pstate
driver when Preferred Core feature is supported. A subset of systems that
support Preferred Core feature can be detected using
X86_FEATURE_AMD_HETEROGENEOUS_CORES however, this does not cover all the
systems that support Preferred Core ranking.
Detecting Preferred Core support on AMD systems requires inspecting CPPC
Highest Perf on all present CPUs and checking if it differs on at least
one CPU. Previous suggestion to use a synthetic feature to detect
Preferred Core support [1] was found to be non-trivial to implement
since BSP alone cannot detect if Preferred Core is supported and by the
time AP comes up, alternatives are patched and setting a X86_FEATURE_*
then is not possible.
Since x86 processors enabling ITMT support that consists multiple
non-NUMA MC groups within a PKG requires SD_ASYM_PACKING flag set at the
PKG domain, return x86_sched_itmt_flags unconditionally for the PKG
domain.
Since x86_die_flags() would have just returned x86_sched_itmt_flags()
after the change, remove the unnecessary wrapper and pass
x86_sched_itmt_flags() directly as the flags function.
Fixes: f3a052391822 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-6-kprateek.nayak@amd.com
|
|
x86_*_flags() wrappers were introduced with commit d3d37d850d1d
("x86/sched: Add SD_ASYM_PACKING flags to x86 ITMT CPU") to add
x86_sched_itmt_flags() in addition to the default domain flags for SMT
and MC domain.
commit 995998ebdebd ("x86/sched: Remove SD_ASYM_PACKING from the
SMT domain flags") removed the ITMT flags for SMT domain but not the
x86_smt_flags() wrappers which directly returns cpu_smt_flags().
Remove x86_smt_flags() and directly use cpu_smt_flags() to derive the
flags for SMT domain. No functional changes intended.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-5-kprateek.nayak@amd.com
|
|
"sched_itmt_enabled" was only introduced as a debug toggle for any funky
ITMT behavior. Move the sysctl controlled from
"/proc/sys/kernel/sched_itmt_enabled" to debugfs at
"/sys/kernel/debug/x86/sched_itmt_enabled" with a notable change that a
cat on the file will return "Y" or "N" instead of "1" or "0" to
indicate that feature is enabled or disabled respectively. Either "0" or
"N" (or any string that kstrtobool() interprets as false) can be written
to the file will disable the feature, and writing either "1" or "Y" (or
any string that kstrtobool() interprets as true) will enable it back
when the platform supports ITMT ranking.
Since ITMT is x86 specific (and PowerPC uses SD_ASYM_PACKING too), the
toggle was moved to "/sys/kernel/debug/x86/" as opposed to
"/sys/kernel/debug/sched/"
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-4-kprateek.nayak@amd.com
|
|
Use guard() for itmt_update_mutex which avoids the extra mutex_unlock()
in the bailout and return paths.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-3-kprateek.nayak@amd.com
|
|
In preparation to move "sysctl_sched_itmt_enabled" to debugfs, convert
the unsigned int to bool since debugfs readily exposes boolean fops
primitives (debugfs_read_file_bool, debugfs_write_file_bool) which can
streamline the conversion.
Since the current ctl_table initializes extra1 and extra2 to SYSCTL_ZERO
and SYSCTL_ONE respectively, the value of "sysctl_sched_itmt_enabled"
can only be 0 or 1 and this datatype conversion should not cause any
functional changes.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20241223043407.1611-2-kprateek.nayak@amd.com
|
|
When the PLACE_LAG scheduling feature is enabled and
dst_cfs_rq->nr_queued is greater than 1, if a task is
ineligible (lag < 0) on the source cpu runqueue, it will
also be ineligible when it is migrated to the destination
cpu runqueue. Because we will keep the original equivalent
lag of the task in place_entity(). So if the task was
ineligible before, it will still be ineligible after
migration.
So in sched_balance_rq(), we prioritize migrating eligible
tasks, and we soft-limit ineligible tasks, allowing them
to migrate only when nr_balance_failed is non-zero to
avoid load-balancing trying very hard to balance the load.
Below are some benchmark test results. From my test results,
this patch shows a slight improvement on hackbench.
Benchmark
=========
All of the benchmarks are done inside a normal cpu cgroup in a
clean environment with cpu turbo disabled, and test machine is:
Single NUMA machine model is 13th Gen Intel(R) Core(TM)
i7-13700, 12 Core/24 HT.
Based on master b86545e02e8c.
Results
=======
hackbench-process-pipes
vanilla patched
Amean 1 0.5837 ( 0.00%) 0.5733 ( 1.77%)
Amean 4 1.4423 ( 0.00%) 1.4503 ( -0.55%)
Amean 7 2.5147 ( 0.00%) 2.4773 ( 1.48%)
Amean 12 3.9347 ( 0.00%) 3.8880 ( 1.19%)
Amean 21 5.3943 ( 0.00%) 5.3873 ( 0.13%)
Amean 30 6.7840 ( 0.00%) 6.6660 ( 1.74%)
Amean 48 9.8313 ( 0.00%) 9.6100 ( 2.25%)
Amean 79 15.4403 ( 0.00%) 14.9580 ( 3.12%)
Amean 96 18.4970 ( 0.00%) 17.9533 ( 2.94%)
hackbench-process-sockets
vanilla patched
Amean 1 0.6297 ( 0.00%) 0.6223 ( 1.16%)
Amean 4 2.1517 ( 0.00%) 2.0887 ( 2.93%)
Amean 7 3.6377 ( 0.00%) 3.5670 ( 1.94%)
Amean 12 6.1277 ( 0.00%) 5.9290 ( 3.24%)
Amean 21 10.0380 ( 0.00%) 9.7623 ( 2.75%)
Amean 30 14.1517 ( 0.00%) 13.7513 ( 2.83%)
Amean 48 24.7253 ( 0.00%) 24.2287 ( 2.01%)
Amean 79 43.9523 ( 0.00%) 43.2330 ( 1.64%)
Amean 96 54.5310 ( 0.00%) 53.7650 ( 1.40%)
tbench4 Throughput
vanilla patched
Hmean 1 255.97 ( 0.00%) 275.01 ( 7.44%)
Hmean 2 511.60 ( 0.00%) 544.27 ( 6.39%)
Hmean 4 996.70 ( 0.00%) 1006.57 ( 0.99%)
Hmean 8 1646.46 ( 0.00%) 1649.15 ( 0.16%)
Hmean 16 2259.42 ( 0.00%) 2274.35 ( 0.66%)
Hmean 32 4725.48 ( 0.00%) 4735.57 ( 0.21%)
Hmean 64 4411.47 ( 0.00%) 4400.05 ( -0.26%)
Hmean 96 4284.31 ( 0.00%) 4267.39 ( -0.39%)
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Hao Jia <jiahao1@lixiang.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241223091446.90208-1-jiahao.kernel@gmail.com
|
|
need_resched warnings, if enabled, are treated as WARNINGs. If
kernel.panic_on_warn is enabled, then this causes a kernel panic.
It's highly unlikely that a panic is desired for these warnings, only a
stack trace is normally required to debug and resolve.
Thus, switch need_resched warnings to simply be a printk with an
associated stack trace so they are no longer in scope for panic_on_warn.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Acked-by: Josh Don <joshdon@google.com>
Link: https://lkml.kernel.org/r/e8d52023-5291-26bd-5299-8bb9eb604929@google.com
|
|
Similarly to dl, create a __setparam_fair() function to set parameters
related to fair class and move it in the fair.c file.
No functional changes expected
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20250110144656.484601-1-vincent.guittot@linaro.org
|
|
We met a SCHED_WARN in set_next_buddy():
__warn_printk
set_next_buddy
yield_to_task_fair
yield_to
kvm_vcpu_yield_to [kvm]
...
After a short dig, we found the rq_lock held by yield_to() may not
be exactly the rq that the target task belongs to. There is a race
window against try_to_wake_up().
CPU0 target_task
blocking on CPU1
lock rq0 & rq1
double check task_rq == p_rq, ok
woken to CPU2 (lock task_pi & rq2)
task_rq = rq2
yield_to_task_fair (w/o lock rq2)
In this race window, yield_to() is operating the task w/o the correct
lock. Fix this by taking task pi_lock first.
Fixes: d95f41220065 ("sched: Add yield_to(task, preempt) functionality")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241231055020.6521-1-dtcccc@linux.alibaba.com
|
|
Normally dequeue_entities() will continue to dequeue an empty group entity;
except DELAY_DEQUEUE changes things -- it retains empty entities such that they
might continue to compete and burn off some lag.
However, doing this results in update_cfs_group() re-computing the cgroup
weight 'slice' for an empty group, which it (rightly) figures isn't much at
all. This in turn means that the delayed entity is not competing at the
expected weight. Worse, the very low weight causes its lag to be inflated,
which combined with avg_vruntime() using scale_load_down(), leads to artifacts.
As such, don't adjust the weight for empty group entities and let them compete
at their original weight.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250110115720.GA17405@noisy.programming.kicks-ass.net
|
|
The whole module_writable_address() nonsense made a giant mess of
alternative.c, not to mention it still contains bugs -- notable some of the
CFI variants crash and burn.
Mike has been working on patches to clean all this up again, but given the
current state of things, this stuff just isn't ready.
Disable for now, lets try again next cycle.
Fixes: 5185e7f9f3bd ("x86/module: enable ROX caches for module text on 64 bit")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250113112934.GA8385@noisy.programming.kicks-ass.net
|
|
Extend HDMI connector output format tests to verify its registration
succeeds only when the presence of YUV420 in the supported formats
matches the state of ycbcr_420_allowed flag.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-4-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Ensure HDMI connector initialization fails when the presence of
HDMI_COLORSPACE_YUV420 in the given supported_formats bitmask doesn't
match the value of drm_connector->ycbcr_420_allowed.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-3-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The case of having an HDMI bridge in the pipeline which advertises
YUV420 capability via its ->supported_formats and a non-HDMI one that
didn't enable ->ycbcr_420_allowed, is incorrectly handled because
supported_formats is passed as is to the helper initializing the HDMI
connector.
Ensure HDMI_COLORSPACE_YUV420 is removed from the bitmask passed to
drmm_connector_hdmi_init() when connector's ->ycbcr_420_allowed flag
ends up not being set.
Fixes: 3ced1c687512 ("drm/display: bridge_connector: handle ycbcr_420_allowed")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-2-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Bridges having DRM_BRIDGE_OP_HDMI set in their ->ops are supposed to
rely on the ->supported_formats bitmask to advertise the permitted
colorspaces, including HDMI_COLORSPACE_YUV420.
However, a new flag ->ycbcr_420_allowed has been recently introduced,
which brings the necessity to require redundant and potentially
inconsistent information to be provided on HDMI bridges initialization.
Adjust ->ycbcr_420_allowed for HDMI bridges according to
->supported_formats, right before adding them to the global bridge list.
This keeps the initialization process straightforward and unambiguous,
thereby preventing any further confusion.
Fixes: 3ced1c687512 ("drm/display: bridge_connector: handle ycbcr_420_allowed")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-1-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Passing a sufficient amount of imix entries leads to invalid access to the
pkt_dev->imix_entries array because of the incorrect boundary check.
UBSAN: array-index-out-of-bounds in net/core/pktgen.c:874:24
index 20 is out of range for type 'imix_pkt [20]'
CPU: 2 PID: 1210 Comm: bash Not tainted 6.10.0-rc1 #121
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl lib/dump_stack.c:117
__ubsan_handle_out_of_bounds lib/ubsan.c:429
get_imix_entries net/core/pktgen.c:874
pktgen_if_write net/core/pktgen.c:1063
pde_write fs/proc/inode.c:334
proc_reg_write fs/proc/inode.c:346
vfs_write fs/read_write.c:593
ksys_write fs/read_write.c:644
do_syscall_64 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:130
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 52a62f8603f9 ("pktgen: Parse internet mix (imix) input")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
[ fp: allow to fill the array completely; minor changelog cleanup ]
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes the volume adjustment issue on the Lenovo ThinkBook 16P Gen5
by applying the necessary quirk configuration for the Realtek ALC287 codec.
The issue was caused by incorrect configuration in the driver,
which prevented proper volume control on certain systems.
Signed-off-by: Yage Geng <icoderdev@gmail.com>
Link: https://patch.msgid.link/20250113085208.15351-1-icoderdev@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Provide an optimized arch_test_bit() implementation which makes use of
flag output constraint. This generates slightly better code:
bloat-o-meter:
add/remove: 51/19 grow/shrink: 450/2444 up/down: 25198/-49136 (-23938)
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The generic bitops implementation is nearly identical to the s390
implementation therefore switch to the generic variant.
This results in a small kernel image size decrease. This is because for
the generic variant the nr parameter for most bitops functions is of
type unsigned int while the s390 variant uses unsigned long.
bloat-o-meter:
add/remove: 670/670 grow/shrink: 167/209 up/down: 21440/-21792 (-352)
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
