| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
Without the dmub hw lock, it may cause the lock timeout issue
while do modeset on PSR1 eDP panel.
[How]
Allow dmub hw lock for PSR1.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a2b5a9956269f4c1a09537177f18ab0229fe79f7)
|
|
[why]
When first time of link training is fail,
eDP would be powered down and
would not be powered up for next retry link training.
It causes that all of retry link linking would be fail.
[how]
We has extracted both power up and down sequence from
enable/disable link output function before DCN32.
We remov eDP power down in dcn32_disable_link_output().
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f5860c88cdfe7300d08c1aef881bba0cac369e34)
|
|
[Why]
There should not be any need to revalidate bandwidth on memory placement
change, since the fb is expected to be pinned to DCN-accessable memory
before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async
flips + memory type change needs to be rejected.
[How]
Do not set lock_and_validation_needed on mem_type change. Instead,
reject an async_flip request if the crtc's buffer(s) changed mem_type.
This may fix stuttering/corruption experienced with PSR SU and PSR1
panels, if the compositor allocates fbs in both VRAM carveout and GTT
and flips between them.
Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4caacd1671b7a013ad04cd8b6398f002540bdd4d)
Cc: stable@vger.kernel.org
|
|
[Why]
Outside of a modeset/link configuration change, we should not have to
wait for the panel to exit PSR. Depending on the panel and it's state,
it may take multiple frames for it to exit PSR. Therefore, waiting in
all scenarios may cause perceived stuttering, especially in combination
with faster vblank shutdown.
[How]
PSR1 disable is hooked up to the vblank enable event, and vice versa. In
case of vblank enable, do not wait for panel to exit PSR, but still wait
in all other cases.
We also avoid a call to unnecessarily change power_opts on disable -
this ends up sending another command to dmcub fw.
When testing against IGT, some crc tests like kms_plane_alpha_blend and
amd_hotplug were failing due to CRC timeouts. This was found to be
caused by the early return before HW has fully exited PSR1. Fix this by
first making sure we grab a vblank reference, then waiting for panel to
exit PSR1, before programming hw for CRC generation.
Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit aa6713fa2046f4c09bf3013dd1420ae15603ca6f)
Cc: stable@vger.kernel.org
|
|
delayed_work submitted to an offlined cpu, will not get executed,
after the specified delay if the cpu remains offline. If the cpu
never comes online the work will never get executed.
checking for online cpu in __queue_delayed_work, does not sound
like a good idea because to do this reliably we need hotplug lock
and since work may be submitted from atomic contexts, we would
have to use cpus_read_trylock. But if trylock fails we would queue
the work on any cpu and this may not be optimal because our intended
cpu might still be online.
Putting a WARN_ON_ONCE for an already offlined cpu, will indicate users
of queue_delayed_work_on, if they are (wrongly) trying to queue
delayed_work on offlined cpu. Also indicate the problem of using
offlined cpu with queue_delayed_work_on, in its description.
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Revert commit 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35")
[Why & How]
Urgent latency increase caused 2.8K OLED monitor caused it to
block this panel support P0.
Reverting this change does not reintroduce the netflix corruption issue
which it fixed.
Fixes: 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c7ccfc0d4241a834c25a9a9e1e78b388b4445d23)
Cc: stable@vger.kernel.org
|
|
[Why]
Observed frame rate get dropped by tool like glxgear. Even though the
output to monitor is 60Hz, the rendered frame rate drops to 30Hz lower.
It's due to code path in some cases will trigger
dm_dp_mst_is_port_support_mode() to read out remote Link status to
assess the available bandwidth for dsc maniplation. Overhead of keep
reading remote DPCD is considerable.
[How]
Store the remote link BW in mst_local_bw and use end-to-end full_pbn
as an indicator to decide whether update the remote link bw or not.
Whenever we need the info to assess the BW, visit the stored one first.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3720
Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4a9a918545455a5979c6232fcf61ed3d8f0db3ae)
Cc: stable@vger.kernel.org
|
|
[Why & How]
Currently in dm_dp_mst_is_port_support_mode(), when valdidating mode
under dsc decoding at the last DP link config, we only validate the
case when there is an UFP. However, if the MSTB LCT=1, there is no
UFP.
Under this case, use root_link_bw_in_kbps as the available bw to
compare.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3720
Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a04d9534a8a75b2806c5321c387be450c364b55e)
Cc: stable@vger.kernel.org
|
|
Only apply when compute profile is selected. This is
the only supported configuration. Selecting other
profiles can lead to performane degradations.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d477e39532d725b1cdb3c8005c689c74ffbf3b94)
Cc: stable@vger.kernel.org # 6.12.x
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixed card-detect on one board and some missing properties added.
* tag 'v6.13-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add hevc power domain clock to rk3328
arm64: dts: rockchip: Fix the SD card detection on NanoPi R6C/R6S
arm64: dts: rockchip: rename rfkill label for Radxa ROCK 5B
arm64: dts: rockchip: add reset-names for combphy on rk3568
Link: https://lore.kernel.org/r/2914560.yaVYbkx8dN@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We are adjusting struct page to make it smaller, removing unneeded fields
which correctly belong to struct folio.
Two of those fields are page->index and page->mapping. Perf is currently
making use of both of these. This is unnecessary. This patch eliminates
this.
Perf establishes its own internally controlled memory-mapped pages using
vm_ops hooks. The first page in the mapping is the read/write user control
page, and the rest of the mapping consists of read-only pages.
The VMA is backed by kernel memory either from the buddy allocator or
vmalloc depending on configuration. It is intended to be mapped read/write,
but because it has a page_mkwrite() hook, vma_wants_writenotify() indicates
that it should be mapped read-only.
When a write fault occurs, the provided page_mkwrite() hook,
perf_mmap_fault() (doing double duty handing faults as well) uses the
vmf->pgoff field to determine if this is the first page, allowing for the
desired read/write first page, read-only rest mapping.
For this to work the implementation has to carefully work around faulting
logic. When a page is write-faulted, the fault() hook is called first, then
its page_mkwrite() hook is called (to allow for dirty tracking in file
systems).
On fault we set the folio's mapping in perf_mmap_fault(), this is because
when do_page_mkwrite() is subsequently invoked, it treats a missing mapping
as an indicator that the fault should be retried.
We also set the folio's index so, given the folio is being treated as faux
user memory, it correctly references its offset within the VMA.
This explains why the mapping and index fields are used - but it's not
necessary.
We preallocate pages when perf_mmap() is called for the first time via
rb_alloc(), and further allocate auxiliary pages via rb_aux_alloc() as
needed if the mapping requires it.
This allocation is done in the f_ops->mmap() hook provided in perf_mmap(),
and so we can instead simply map all the memory right away here - there's
no point in handling (read) page faults when we don't demand page nor need
to be notified about them (perf does not).
This patch therefore changes this logic to map everything when the mmap()
hook is called, establishing a PFN map. It implements vm_ops->pfn_mkwrite()
to provide the required read/write vs. read-only behaviour, which does not
require the previously implemented workarounds.
While it is not ideal to use a VM_PFNMAP here, doing anything else will
result in the page_mkwrite() hook need to be provided, which requires the
same page->mapping hack this patch seeks to undo.
It will also result in the pages being treated as folios and placed on the
rmap, which really does not make sense for these mappings.
Semantically it makes sense to establish this as some kind of special
mapping, as the pages are managed by perf and are not strictly user pages,
but currently the only means by which we can do so functionally while
maintaining the required R/W and R/O behaviour is a PFN map.
There should be no change to actual functionality as a result of this
change.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250103153151.124163-1-lorenzo.stoakes@oracle.com
|
|
The same CXL PMONs support is also avaiable on GNR. Apply
spr_uncore_cxlcm and spr_uncore_cxldp to GNR as well.
The other units were broken on early HW samples, so they were ignored in
the early enabling patch. The issue has been fixed and verified on the
later production HW. Add UPI, B2UPI, B2HOT, PCIEX16 and PCIEX8 for GNR.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Eric Hu <eric.hu@intel.com>
Link: https://lkml.kernel.org/r/20250108143017.1793781-2-kan.liang@linux.intel.com
|
|
The below warning may be triggered on GNR when the PCIE uncore units are
exposed.
WARNING: CPU: 4 PID: 1 at arch/x86/events/intel/uncore.c:1169 uncore_pci_pmu_register+0x158/0x190
The current uncore driver assumes that all the devices in the same PMU
have the exact same devfn. It's true for the previous platforms. But it
doesn't work for the new PCIE uncore units on GNR.
The assumption doesn't make sense. There is no reason to limit the
devices from the same PMU to the same devfn. Also, the current code just
throws the warning, but still registers the device. The WARN_ON_ONCE()
should be removed.
The func_id is used by the later event_init() to check if a event->pmu
has valid devices. For cpu and mmio uncore PMUs, they are always valid.
For pci uncore PMUs, it's set when the PMU is registered. It can be
replaced by the pmu->registered. Clean up the func_id.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Eric Hu <eric.hu@intel.com>
Link: https://lkml.kernel.org/r/20250108143017.1793781-1-kan.liang@linux.intel.com
|
|
Commit 8fd4ddda2f49 ("static_call: Don't make __static_call_return0
static") split static_call.c and created static_call_inline.c. This was
not reflected in MAINTAINERS.
Fix it by changing the MAINTAINERS line to be a glob: static_call*.c.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250109114703.426577-1-jirislaby@kernel.org
|
|
Oleg reported that it is hard to find the definition of things like:
__free(argv) without having to do 'git grep "DEFINE_FREE(argv,"'.
Add tag generation for the various macros in cleanup.h.
Notably 'DEFINE_FREE(argv, ...)' will now generate a 'cleanup_argv'
tag, while all the others, eg. 'DEFINE_GUARD(mutex, ...)' will
generate 'class_mutex' like tags.
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250106102647.GB20870@noisy.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix the maximum cell name length
- Fix merge preference rule failure condition
fuse:
- Fix fuse_get_user_pages() so it doesn't risk misleading the caller
to think pages have been allocated when they actually haven't
- Fix direct-io folio offset and length calculation
netfs:
- Fix async direct-io handling
- Fix read-retry for filesystems that don't provide a
->prepare_read() method
vfs:
- Prevent truncating 64-bit offsets to 32-bits in iomap
- Fix memory barrier interactions when polling
- Remove MNT_ONRB to fix concurrent modification of @mnt->mnt_flags
leading to MNT_ONRB to not be raised and invalid access to a list
member"
* tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
poll: kill poll_does_not_wait()
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
io_uring_poll: kill the no longer necessary barrier after poll_wait()
poll_wait: kill the obsolete wait_address check
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
afs: Fix merge preference rule failure condition
netfs: Fix read-retry for fs with no ->prepare_read()
netfs: Fix kernel async DIO
fs: kill MNT_ONRB
iomap: avoid avoid truncating 64-bit offset to 32 bits
afs: Fix the maximum cell name length
fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure
fuse: fix direct io folio offset and length calculation
|
|
Pull xfs fixes from Carlos Maiolino:
- Fix a missing lock while detaching a dquot buffer
- Fix failure on xfs_update_last_rtgroup_size for !XFS_RT
* tag 'xfs-fixes-6.13-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: lock dquot buffer before detaching dquot from b_li_list
xfs: don't return an error from xfs_update_last_rtgroup_size for !XFS_RT
|
|
In psz_init_zones, if the requested area has a total_size less than
record_size, kcalloc will be called with c == 0 and will return
ZERO_SIZE_PTR.
Further, this will lead to an oops.
With this patch, in this scenario, it will look like this :
[ 6.865545] pstore_zone: total size : 28672 Bytes
[ 6.865547] pstore_zone: kmsg size : 65536 Bytes
[ 6.865549] pstore_zone: pmsg size : 0 Bytes
[ 6.865551] pstore_zone: console size : 0 Bytes
[ 6.865553] pstore_zone: ftrace size : 0 Bytes
[ 6.872095] pstore_zone: zone dmesg total_size too small
[ 6.878234] pstore_zone: alloc zones failed
Signed-off-by: Eugen Hristev <eugen.hristev@linaro.org>
Link: https://lore.kernel.org/r/20250110125714.2594719-1-eugen.hristev@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Most of these sizes and counts are capped at 256MB so the math doesn't
result in an integer overflow. The "relocs" count needs to be checked
as well. Otherwise on 32bit systems the calculation of "full_data"
could be wrong.
full_data = data_len + relocs * sizeof(unsigned long);
Fixes: c995ee28d29d ("binfmt_flat: prevent kernel dammage from corrupted executable headers")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/5be17f6c-5338-43be-91ef-650153b975cb@stanley.mountain
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Match IRQ1 wakeup disable with the enable on i8042 side
- intel: power-domains: Clearwater Forest support
- intel/pmc: Skip SSRAM setup when no additional devices are present
- ISST: Clearwater Forest support"
* tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel/pmc: Fix ioremap() of bad address
platform/x86: ISST: Add Clearwater Forest to support list
platform/x86/intel: power-domains: Add Clearwater Forest support
platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes for !REGULATOR and !OF configurations, adding
missing stubs"
* tag 'regulator-fix-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Move OF_ API declarations/definitions outside CONFIG_REGULATOR
regulator: Guard of_regulator_bulk_get_all() with CONFIG_OF
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"There's one small fix for real HW - gpio-loongson.
The rest concern two virtual testing drivers in which some issues were
recently found and addressed:
- fix resource leaks in error path in gpio-virtuser (and one
consistent memory leak triggered on every device removal))
- fix the use-case of having multiple con_ids in a lookup table in
gpio-virtuser which has never worked (despite being advertised)
- don't allow rmdir() on configfs directories when they are in use in
gpio-sim and gpio-virtuser
- fix register offsets in gpio-loongson-64"
* tag 'gpio-fixes-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: loongson: Fix Loongson-2K2000 ACPI GPIO register offset
gpio: sim: lock up configfs that an instantiated device depends on
gpio: virtuser: lock up configfs that an instantiated device depends on
gpio: virtuser: fix handling of multiple conn_ids in lookup table
gpio: virtuser: fix missing lookup table cleanups
|
|
nvme multipath reports that they see spurious -EAGAIN bubbling back to
userspace, which is caused by how they handle retries internally through
a kworker. However, any data that needs preserving or importing for
a read/write request has always been done so at prep time, and we can
sanely skip this check.
Reported-by: "Haeuptle, Michael" <michael.haeuptle@hpe.com>
Link: https://lore.kernel.org/io-uring/DS7PR84MB31105C2C63CFA47BE8CBD6EE95102@DS7PR84MB3110.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than try and have io_read/io_write turn REQ_F_REISSUE into
-EAGAIN, catch the REQ_F_REISSUE when the request is otherwise
considered as done. This is saner as we know this isn't happening
during an actual submission, and it removes the need to randomly
check REQ_F_REISSUE after read/write submission.
If REQ_F_REISSUE is set, __io_submit_flush_completions() will skip over
this request in terms of posting a CQE, and the regular request
cleaning will ensure that it gets reissued via io-wq.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Cleanup should always have the uring lock held, it's safe to recycle
from here.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document the flag along with PMU events to hint what it's used for and
give an example with other useful options to get minimal output.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250108142904.401139-3-james.clark@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
FEAT_SPEv1p2 (optional from Armv8.6) adds a discard mode that allows all
SPE data to be discarded rather than written to memory. Add a format
bit for this mode.
If the mode isn't supported, the format bit isn't published and attempts
to use it will result in -EOPNOTSUPP. Allocating an aux buffer is still
allowed even though it won't be written to so that old tools continue to
work, but updated tools can choose to skip this step.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewd-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250108142904.401139-2-james.clark@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This field duplicate the LO_FLAGS_DIRECT_IO flag in lo_flags. Remove it
to have a single source of truth about using direct I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All callers of loop_update_dio except for loop_configure already have the
queue frozen, and loop_configure works on an unbound device. Remove the
superfluous recursive freezing in loop_update_dio and add asserts for the
locking and freezing state instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unlike all other calls of (__)loop_update_dio, loop_set_status never
looks at the O_DIRECT flag of the backing file, and thus doesn't
re-enable direct I/O on an O_DIRECT backing file if e.g. the new block
size would allow it. Fix that and remove the need for the separate
__loop_update_dio flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
loop_set_dio is different from the other (__)loop_update_dio callers in
that it doesn't take any implicit conditions into account and wants to
update the direct I/O flag to the user passed in value and fail if that
can't be done.
Open code the logic here to prepare for simplifying the other direct I/O
flag updates and to make the error handling less convoluted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no point in doing an fdatasync to write out pages when switching
away from direct I/O, as there won't be any. The writeback is only
needed when switching to direct I/O, which would have to invalidate the
pagecache less efficiently from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a part of __loop_update_dio in preparation for further
refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The concept of transfers is gone since commit 47e9624616c8 ("block:
remove support for cryptoloop and the xor transfer").
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While loop_configure simplify assigns the flags passed in by userspace,
loop_set_status only looks at the two changeable flags, and currently
has to do a complicate dance to implement that.
Move assign lo->lo_flags out of loop_set_status_from_info into the
callers and thus drastically simplify the lo_flags handling in
loop_set_status.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A collection of device specific fixes that came in over the holidays,
plus a MAINTAINERS update and some documentation to help users debug
problems with some of the Cirrus CODECs found in modern laptops.
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper and document the callers that
do not freeze the queue at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace loop_reconfigure_limits with a slightly less encompassing
loop_update_limits that expects the caller to acquire and commit the
queue limits to prepare for sorting out the freeze vs limits lock
ordering.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
This also allows removes the need for the separate __nbd_set_size helper,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock.
Unlike most queue updates this does not use the
queue_limits_commit_update_frozen helper as the nvme driver want the
queue frozen for more than just the limits update.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_attr_store() always freezes a device queue before calling the
attribute store operation. For attributes that control queue limits, the
store operation will also lock the queue limits with a call to
queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may
need to issue commands to a device to obtain limit values from the
hardware with the queue limits locked. This creates a potential ABBA
deadlock situation if a user attempts to modify a limit (thus freezing
the device queue) while the device driver starts a revalidation of the
device queue limits.
Avoid such deadlock by not freezing the queue before calling the
->store_limit() method in struct queue_sysfs_entry and instead use the
queue_limits_commit_update_frozen helper to freeze the queue after taking
the limits lock.
This also removes taking the sysfs lock for the store_limit method as
it doesn't protect anything here, but creates even more nesting.
Hopefully it will go away from the actual sysfs methods entirely soon.
(commit log adapted from a similar patch from Damien Le Moal)
Fixes: ff956a3be95b ("block: use queue_limits_commit_update in queue_discard_max_store")
Fixes: 0327ca9d53bf ("block: use queue_limits_commit_update in queue_max_sectors_store")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
De-duplicate the code for updating queue limits by adding a store_limit
method that allows having common code handle the actual queue limits
update.
Note that this is a pure refactoring patch and does not address the
existing freeze vs limits lock order problem in the refactored code,
which will be addressed next.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When __blk_mq_update_nr_hw_queues changes the number of tag sets, it
might have to disable poll queues. Currently it does so by adjusting
the BLK_FEAT_POLL, which is a bit against the intent of features that
describe hardware / driver capabilities, but more importantly causes
nasty lock order problems with the broadly held freeze when updating the
number of hardware queues and the limits lock. Fix this by leaving
BLK_FEAT_POLL alone, and instead check for the number of poll queues in
the bio submission and poll handlers. While this adds extra work to the
fast path, the variables are in cache lines used by these operations
anyway, so it should be cheap enough.
Fixes: 8023e144f9d6 ("block: move the poll flag to queue_limits")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Otherwise feature reconfiguration can race with I/O submission.
Also drop the bio_clear_polled in the error path, as the flag does not
matter for instant error completions, it is a left over from when we
allowed polled I/O to proceed unpolled in this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper that freezes the queue, updates the queue limits and
unfreezes the queue and convert all open coded versions of that to the
new helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_commit_update is the function that needs to operate on a
frozen queue, not queue_limits_start_update. Update the kerneldoc
comments to reflect that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.13-rc7
Here are some new modem and cp210x device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.13-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Neoway N723-EA support
USB: serial: option: add MeiG Smart SRM815
USB: serial: cp210x: add Phoenix Contact UPS Device
|
|
David Howells <dhowells@redhat.com> says:
Here are some patches to make a number of improvements to the AFS dynamic
root:
(1) Create an /afs/.<cell> mountpoint to match the /afs/<cell> mountpoint
when a cell is created.
(2) Add some more checks on cell names proposed by the user to prevent
dodgy symlink bodies from being created. Also prevent rootcell from
being altered once set to simplify the locking.
(3) Change the handling of /afs/@cell from being a dentry name
substitution at lookup time to making it a symlink to the current cell
name and also provide a /afs/.@cell symlink to point to the dotted
cell mountpoint.
* patches from https://lore.kernel.org/r/20250107183454.608451-1-dhowells@redhat.com:
afs: Make /afs/@cell and /afs/.@cell symlinks
afs: Add rootcell checks
afs: Make /afs/.<cell> as well as /afs/<cell> mountpoints
Link: https://lore.kernel.org/r/20250107183454.608451-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make /afs/@cell a symlink in the /afs dynamic root to match what other AFS
clients do rather than doing a substitution in the dentry name. This has
the bonus of being tab-expandable also.
Further, provide a /afs/.@cell symlink to point to the dotted cell share.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250107183454.608451-4-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
