| Age | Commit message (Collapse) | Author |
|---|
|
NIX block can receive packets from multiple links such as
MAC (RPM), LBK and CPT.
-----------------
RPM --| NIX |
-----------------
|
|
LBK
Each link supports multiple channels for example RPM link supports
16 channels. In case of link oversubsribe, NIX will assert backpressure
on receive channels.
The previous patch considered a single channel per link, resulting in
backpressure not being enabled on the remaining channels
Fixes: a7ef63dbd588 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250617063403.3582210-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rely on existing IB_MTU_XXX definitions which exist in ib_verbs.h.
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/382c91ee506e7f1f3c1801957df6b28963484b7d.1750147222.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The implementation of nla_data is as follows:
static inline void *nla_data(const struct nlattr *nla)
{
return (char *) nla + NLA_HDRLEN;
}
Excluding the case where nla is exactly -NLA_HDRLEN, it will not return
NULL. And it seems misleading to assume that it can, other than in this
corner case. So drop checks for this condition.
Flagged by Smatch.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250617-nfc-null-data-v1-1-c7525ead2e95@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix a couple bugs in cgroup cpu.weight support
- Add the new sched-ext@lists.linux.dev to MAINTAINERS
* tag 'sched_ext-for-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext, sched/core: Don't call scx_group_set_weight() prematurely from sched_create_group()
sched_ext: Make scx_group_set_weight() always update tg->scx.weight
sched_ext: Update mailing list entry in MAINTAINERS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-06-17 (ice, e1000e)
For ice:
Krishna Kumar modifies aRFS match criteria to correctly identify
matching filters.
Grzegorz fixes a memory leak in eswitch legacy mode.
For e1000e:
Vitaly sets clock frequency on some Nahum systems which may misreport
their value.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: set fixed clock frequency indication for Nahum 11 and Nahum 13
ice: fix eswitch code memory leak in reset scenario
net: ice: Perform accurate aRFS flow match
====================
Link: https://patch.msgid.link/20250617172444.1419560-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Depending on e.g. DT configuration this driver uses a fixed link.
So we shouldn't rely on the user to enable FIXED_PHY, select it in
Kconfig instead. We may end up with a non-functional driver otherwise.
Fixes: 38561ded50d0 ("net: ftgmac100: support fixed link")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/476bb33b-5584-40f0-826a-7294980f2895@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit under fixes switched to uAPI generation from the YAML
spec. A number of custom defines were left behind, mostly
for commands very hard to express in YAML spec.
Among what was left behind was the name and version of
the generic netlink family. Problem is that the codegen
always outputs those values so we ended up with a duplicated,
differently named set of defines.
Provide naming info in YAML and remove the incorrect defines.
Fixes: 8d0580c6ebdd ("ethtool: regenerate uapi header from the spec")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250617202240.811179-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Fix a regression in the arm64 Poly1305 code
- Fix a couple compiler warnings
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto/poly1305: Fix arm64's poly1305_blocks_arch()
lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older
lib/crypto: Annotate crypto strings with nonstring
|
|
Jakub Kicinski says:
====================
eth: migrate more drivers to new RXFH callbacks
Migrate a batch of drivers to the recently added dedicated
.get_rxfh_fields and .set_rxfh_fields ethtool callbacks.
====================
Link: https://patch.msgid.link/20250617014848.436741-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
RXFH is all this driver supports in RXNFC so old callbacks are
completely removed.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
RXFH is all this driver supports in RXNFC so old callbacks are
completely removed.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
eth: migrate some drivers to new RXFH callbacks
Migrate a batch of drivers to the recently added dedicated
.get_rxfh_fields and .set_rxfh_fields ethtool callbacks.
====================
Link: https://patch.msgid.link/20250617014555.434790-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Link: https://patch.msgid.link/20250617014555.434790-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
The driver has no other RXNFC functionality so the SET callback can
be now removed.
Link: https://patch.msgid.link/20250617014555.434790-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
The driver has no other RXNFC functionality so the SET callback can
be now removed.
Reviewed-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617014555.434790-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250617014555.434790-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
The driver has no other RXNFC functionality so the SET callback can
be now removed.
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20250617014555.434790-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An issue was found:
# cd /sys/fs/cgroup/freezer/
# mkdir test
# echo FROZEN > test/freezer.state
# cat test/freezer.state
FROZEN
# sleep 1000 &
[1] 863
# echo 863 > test/cgroup.procs
# cat test/freezer.state
FREEZING
When tasks are migrated to a frozen cgroup, the freezer fails to
immediately freeze the tasks, causing the cgroup to remain in the
"FREEZING".
The freeze_task() function is called before clearing the CGROUP_FROZEN
flag. This causes the freezing() check to incorrectly return false,
preventing __freeze_task() from being invoked for the migrated task.
To fix this issue, clear the CGROUP_FROZEN state before calling
freeze_task().
Fixes: f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Zhong Jiawei <zhongjiawei1@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A small SELinux patch to resolve a UBSAN warning in the
xfrm/labeled-IPsec code"
* tag 'selinux-pr-20250618' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix selinux_xfrm_alloc_user() to set correct ctx_len
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fix from Steven Rostedt:
- Do not blindly enable function_graph tracer when updating
funcgraph-args
When the option to trace function arguments in the function graph
trace is updated, it requires the function graph tracer to switch its
callback routine. It disables function graph tracing, updates the
callback and then re-enables function graph tracing.
The issue is that it doesn't check if function graph tracing is
currently enabled or not. If it is not enabled, it will try to
disable it and re-enable it (which will actually enable it even
though it is not the current tracer). This causes an issue in the
accounting and will trigger a WARN_ON() if the function tracer is
enabled after that.
* tag 'ftrace-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Do not enable function_graph tracer when setting funcgraph-args
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Force PIO for ATAPI devices on VT6415/VT6330 as the controller locks
up on ATAPI DMA (Tasos)
- Fix ACPI PATA cable type detection such that the controller is not
forced down to a slow transfer mode (Tasos)
- Fix build error on 32-bit UML (Johannes)
- Fix a PCI region leak in the pata_macio driver so that the driver no
longer fails to load after rmmod (Philipp)
- Use correct DMI BIOS build date for ThinkPad W541 quirk (me)
- Disallow LPM for ASUSPRO-D840SA motherboard as this board
interestingly enough gets graphical corruptions on the iGPU when LPM
is enabled (me)
- Disallow LPM for Asus B550-F motherboard as this board will get
command timeouts on ports 5 and 6, yet LPM with the same drive works
fine on all other ports (Mikko)
* tag 'ata-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Disallow LPM for Asus B550-F motherboard
ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard
ata: ahci: Use correct BIOS build date for ThinkPad W541 quirk
ata: pata_macio: Fix PCI region leak
ata: pata_cs5536: fix build on 32-bit UML
ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled
ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
|
|
Adding myself as the contact for Power
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://lore.kernel.org/r/20250614152925.82831-1-maddy@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When setting the funcgraph-args option when function graph tracer is net
enabled, it incorrectly enables it. Worse, it unregisters itself when it
was never registered. Then when it gets enabled again, it will register
itself a second time causing a WARNing.
~# echo 1 > /sys/kernel/tracing/options/funcgraph-args
~# head -20 /sys/kernel/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 813/26317372 #P:8
#
# _-----=> irqs-off/BH-disabled
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
<idle>-0 [007] d..4. 358.966010: 7) 1.692 us | fetch_next_timer_interrupt(basej=4294981640, basem=357956000000, base_local=0xffff88823c3ae040, base_global=0xffff88823c3af300, tevt=0xffff888100e47cb8);
<idle>-0 [007] d..4. 358.966012: 7) | tmigr_cpu_deactivate(nextexp=357988000000) {
<idle>-0 [007] d..4. 358.966013: 7) | _raw_spin_lock(lock=0xffff88823c3b2320) {
<idle>-0 [007] d..4. 358.966014: 7) 0.981 us | preempt_count_add(val=1);
<idle>-0 [007] d..5. 358.966017: 7) 1.058 us | do_raw_spin_lock(lock=0xffff88823c3b2320);
<idle>-0 [007] d..4. 358.966019: 7) 5.824 us | }
<idle>-0 [007] d..5. 358.966021: 7) | tmigr_inactive_up(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) {
<idle>-0 [007] d..5. 358.966022: 7) | tmigr_update_events(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) {
Notice the "tracer: nop" at the top there. The current tracer is the "nop"
tracer, but the content is obviously the function graph tracer.
Enabling function graph tracing will cause it to register again and
trigger a warning in the accounting:
~# echo function_graph > /sys/kernel/tracing/current_tracer
-bash: echo: write error: Device or resource busy
With the dmesg of:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 1095 at kernel/trace/ftrace.c:3509 ftrace_startup_subops+0xc1e/0x1000
Modules linked in: kvm_intel kvm irqbypass
CPU: 7 UID: 0 PID: 1095 Comm: bash Not tainted 6.16.0-rc2-test-00006-gea03de4105d3 #24 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ftrace_startup_subops+0xc1e/0x1000
Code: 48 b8 22 01 00 00 00 00 ad de 49 89 84 24 88 01 00 00 8b 44 24 08 89 04 24 e9 c3 f7 ff ff c7 04 24 ed ff ff ff e9 b7 f7 ff ff <0f> 0b c7 04 24 f0 ff ff ff e9 a9 f7 ff ff c7 04 24 f4 ff ff ff e9
RSP: 0018:ffff888133cff948 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 1ffff1102679ff31 RCX: 0000000000000000
RDX: 1ffffffff0b27a60 RSI: ffffffff8593d2f0 RDI: ffffffff85941140
RBP: 00000000000c2041 R08: ffffffffffffffff R09: ffffed1020240221
R10: ffff88810120110f R11: ffffed1020240214 R12: ffffffff8593d2f0
R13: ffffffff8593d300 R14: ffffffff85941140 R15: ffffffff85631100
FS: 00007f7ec6f28740(0000) GS:ffff8882b5251000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7ec6f181c0 CR3: 000000012f1d0005 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __pfx_ftrace_startup_subops+0x10/0x10
? find_held_lock+0x2b/0x80
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
? trace_preempt_on+0xd0/0x110
? __pfx_trace_graph_entry_args+0x10/0x10
register_ftrace_graph+0x4d2/0x1020
? tracing_reset_online_cpus+0x14b/0x1e0
? __pfx_register_ftrace_graph+0x10/0x10
? ring_buffer_record_enable+0x16/0x20
? tracing_reset_online_cpus+0x153/0x1e0
? __pfx_tracing_reset_online_cpus+0x10/0x10
? __pfx_trace_graph_return+0x10/0x10
graph_trace_init+0xfd/0x160
tracing_set_tracer+0x500/0xa80
? __pfx_tracing_set_tracer+0x10/0x10
? lock_release+0x181/0x2d0
? _copy_from_user+0x26/0xa0
tracing_set_trace_write+0x132/0x1e0
? __pfx_tracing_set_trace_write+0x10/0x10
? ftrace_graph_func+0xcc/0x140
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
vfs_write+0x1d0/0xe90
? __pfx_vfs_write+0x10/0x10
Have the setting of the funcgraph-args check if function_graph tracer is
the current tracer of the instance, and if not, do nothing, as there's
nothing to do (the option is checked when function_graph tracing starts).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250618073801.057ea636@gandalf.local.home
Fixes: c7a60a733c373 ("ftrace: Have funcgraph-args take affect during tracing")
Closes: https://lore.kernel.org/all/4ab1a7bdd0174ab09c7b0d68cdbff9a4@huawei.com/
Reported-by: Changbin Du <changbin.du@huawei.com>
Tested-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Gustavo Luiz Duarte says:
====================
netconsole: Add support for msgid in sysdata
This patch series introduces a new feature to netconsole which allows
appending a message ID to the userdata dictionary.
If the msgid feature is enabled, the message ID is built from a per-target 32
bit counter that is incremented and appended to every message sent to the target.
Example::
echo 1 > "/sys/kernel/config/netconsole/cmdline0/userdata/msgid_enabled"
echo "This is message #1" > /dev/kmsg
echo "This is message #2" > /dev/kmsg
13,434,54928466,-;This is message #1
msgid=1
13,435,54934019,-;This is message #2
msgid=2
This feature can be used by the target to detect if messages were dropped or
reordered before reaching the target. This allows system administrators to
assess the reliability of their netconsole pipeline and detect loss of messages
due to network contention or temporary unavailability.
---
Changes in v3:
- Add kdoc documentation for msgcounter.
- Link to v2: https://lore.kernel.org/r/20250612-netconsole-msgid-v2-0-d4c1abc84bac@gmail.com
Changes in v2:
- Use wrapping_assign_add() to avoid warnings in UBSAN and friends.
- Improve documentation to clarify wrapping and distinguish msgid from sequnum.
- Rebase and fix conflict in prepare_extradata().
- Link to v1: https://lore.kernel.org/r/20250611-netconsole-msgid-v1-0-1784a51feb1e@gmail.com
====================
Suggested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add documentation explaining the msgid feature in netconsole.
This feature appends unique id to the userdata dictionary. The message
ID is populated from a per-target 32 bit counter which is incremented
for each message sent to the target. This allows a target to detect if
messages are dropped before reaching the target.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the self-tests to cover the 'msgid' feature in sysdata.
Verify that msgid is appended to the message when the feature is enabled
and that it is not appended when the feature is disabled.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add msgcounter to the netconsole_target struct to generate message IDs.
If the msgid_enabled attribute is true, increment msgcounter and append
msgid=<msgcounter> to sysdata buffer before sending the message.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement the _show and _store functions for the msgid_enabled configfs
attribute under userdata.
Set the sysdata_fields bit accordingly.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds a new sysdata field to enable assigning a per-target unique id
to each message sent to that target. This id can later be appended as
part of sysdata, allowing targets to detect dropped netconsole messages.
Update count_extradata_entries() to take the new field into account.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
fixes for 6.16-rc3
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After the following commit from 2024:
commit e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent")
...there was buggy behavior where TCP connections without SACK support
could easily see erroneous undo events at the end of fast recovery or
RTO recovery episodes. The erroneous undo events could cause those
connections to suffer repeated loss recovery episodes and high
retransmit rates.
The problem was an interaction between the non-SACK behavior on these
connections and the undo logic. The problem is that, for non-SACK
connections at the end of a loss recovery episode, if snd_una ==
high_seq, then tcp_is_non_sack_preventing_reopen() holds steady in
CA_Recovery or CA_Loss, but clears tp->retrans_stamp to 0. Then upon
the next ACK the "tcp: fix to allow timestamp undo if no retransmits
were sent" logic saw the tp->retrans_stamp at 0 and erroneously
concluded that no data was retransmitted, and erroneously performed an
undo of the cwnd reduction, restoring cwnd immediately to the value it
had before loss recovery. This caused an immediate burst of traffic
and build-up of queues and likely another immediate loss recovery
episode.
This commit fixes tcp_packet_delayed() to ignore zero retrans_stamp
values for non-SACK connections when snd_una is at or above high_seq,
because tcp_is_non_sack_preventing_reopen() clears retrans_stamp in
this case, so it's not a valid signal that we can undo.
Note that the commit named in the Fixes footer restored long-present
behavior from roughly 2005-2019, so apparently this bug was present
for a while during that era, and this was simply not caught.
Fixes: e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent")
Reported-by: Eric Wheeler <netdev@lists.ewheeler.net>
Closes: https://lore.kernel.org/netdev/64ea9333-e7f9-0df-b0f2-8d566143acab@ewheeler.net/
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Co-developed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current cmd_ver range checking on cmd_ver < 1 && cmd_ver > 3 can
never be true because the logical operator && is being used, cmd_ver
can never be less than 1 and also greater than 3. Fix this by using
the logical || operator.
Fixes: df6146a0296e ("wifi: iwlwifi: Add a new version for mac config command")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250522121703.2766764-1-colin.i.king@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Apparently I accidentally removed this setting in my transport
configuration rework, leading to an endless stream of warnings
from the PCIe code when relevant notifications are received by
the driver from firmware. Restore it.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Closes: https://lore.kernel.org/r/e8c45d32-6129-8a5e-af80-ccc42aaf200b@gmail.com/
Fixes: 08e77d5edf70 ("wifi: iwlwifi: rework transport configuration")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250616134902.222342908ca4.I47a551c86cbc0e9de4f980ca2fd0d67bf4052e50@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
on arm64 defconfig build failed with gcc-8:
drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info.c:208:3:
include/linux/bitfield.h:195:3: error: call to '__field_overflow'
declared with attribute error: value doesn't fit into mask
__field_overflow(); \
^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:215:2: note: in expansion of macro '____MAKE_OP'
____MAKE_OP(u##size,u##size,,)
^~~~~~~~~~~
include/linux/bitfield.h:218:1: note: in expansion of macro '__MAKE_OP'
__MAKE_OP(32)
Limit cb_size to valid range to fix it.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/7b373a4426070d50b5afb3269fd116c18ce3aea8.1748332709.git.xiaopei01@kylinos.cn
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The initialization of async_handlers_list
was accidentally removed in a previous change.
Then it was restoted by commit 175e69e33c66 ("wifi: iwlwifi: restore
missing initialization of async_handlers_list").
Somehow, the initialization disappeared again.
Restote it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git updates for v6.16-rc3
Fix the following 3 issues:
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: carl9170: do not ping device which has failed to load firmware
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the firmware gives bad input, that's nothing to do with
the driver's stack at this point etc., so the WARN_ON()
doesn't add any value. Additionally, this is one of the
top syzbot reports now. Just print a message, and as an
added bonus, print the sizes too.
Reported-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com
Tested-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250617114529.031a677a348e.I58bf1eb4ac16a82c546725ff010f3f0d2b0cca49@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Remove documentation of rclk_dev_name member of dpll_device which
doesn't exist.
Flagged by ./scripts/kernel-doc -none
Introduced by commit 9431063ad323 ("dpll: core: Add DPLL framework base
functions")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250616-dpll-member-v1-1-8c9e6b8e1fd4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
libeth: add libeth_xdp helper lib
Alexander Lobakin says:
Time to add XDP helpers infra to libeth to greatly simplify adding
XDP to idpf and iavf, as well as improve and extend XDP in ice and
i40e. Any vendor is free to reuse helpers. If this happens, I'm fine
with moving the folder of out intel/.
The helpers greatly simplify building xdp_buff, running a prog,
handling the verdict, implement XDP_TX, .ndo_xdp_xmit, XDP buffer
completion. Same applies to XSk (with XSk xmit instead of
.ndo_xdp_xmit, plus stuff like XSk wakeup).
They are entirely generic with no HW definitions or assumptions.
HW-specific stuff like parsing Rx desc / filling Tx desc is passed
from the driver as inline callbacks.
For now, key assumptions that optimize performance / avoid code
bloat, but might not fit every driver in driver/net/:
* netmem holding the buffers are always order-0;
* driver has separate XDP Tx queues, doesn't use stack queues for
that. For best efficiency, you may want to have nr_cpu_ids XDP
queues, but less (queue sharing) is also supported;
* XDP Tx queues are interrupt-less and use "lazy" cleaning only
when there are less than 1/4 free Tx descriptors of the queue
size;
* main target platforms are 64-bit, although 32-bit is also fully
supported, but the code might be not as optimized for them.
Library code already supports multi-buffer for all kinds of Tx and
both header split and no split for Rx and Tx. Frags can come from
devmem/io_uring etc., direct `struct page *` is used only for header
buffers for which it's always true.
Drivers are free to pass their own Rx hints and XSK xmit hints ops.
XDP_TX and ndo_xdp_xmit use onstack bulk for the frames to be sent
and send them by batches of 16 buffers. This eats ~280 bytes on the
stack, but gives good boosts and allow to greatly optimize the main
sending function leaving it without any error/exception paths.
XSk xmit fills Tx descriptors in the loop unrolled by 8. This was
proven to improve perf on ice and i40e. XDP_TX and ndo_xdp_xmit
doesn't use unrolling as I wasn't able to get any improvements in
those scenenarios from this, while +1 Kb for their sending functions
for nothing doesn't sound reasonable.
XSk wakeup, instead of traditionally used "SW interrupts" provided
by NICs, uses IPI to schedule NAPI on the CPU corresponding to the
given queue pair. It gives better control over CPU distribution and
in general performs way better than "SW interrupts", plus allows us
to not pass any HW-specific callbacks there.
The code is built the way that all callbacks passed from drivers
get inlined; in general, most of hotpath gets inlined. Everything
slow/exception lands to .c files in the libeth folder, doesn't
create copies in the drivers themselves and doesn't overloat
hotpath.
Sure, inlining means that hotpath will be compiled into every driver
that uses the lib, but the core code is written in one place, so no
copying of bugs happens. Fixed once -- works everywhere.
The last commit might look like sorta hack, but it gives really good
boosts and decreases object code size, plus there are checks that
all those wider accesses are fully safe, so I don't feel anything
bad about it.
An example of using libeth_xdp can be found either on my GitHub or
on the mailing lists here ("XDP for idpf"). Macros for building
driver XDP functions lead to that some implementations (XDP_TX,
ndo_xdp_xmit etc.) consist of really only a few lines.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
libeth: xdp, xsk: access adjacent u32s as u64 where applicable
libeth: xsk: add XSkFQ refill and XSk wakeup helpers
libeth: xsk: add XSk Rx processing support
libeth: xsk: add XSk xmit functions
libeth: xsk: add XSk XDP_TX sending helpers
libeth: xdp: add RSS hash hint and XDP features setup helpers
libeth: xdp: add templates for building driver-side callbacks
libeth: xdp: add XDP prog run and verdict result handling
libeth: xdp: add helpers for preparing/processing &libeth_xdp_buff
libeth: xdp: add XDPSQ cleanup timers
libeth: xdp: add XDPSQ locking helpers
libeth: xdp: add XDPSQE completion helpers
libeth: xdp: add .ndo_xdp_xmit() helpers
libeth: xdp: add XDP_TX buffers sending
libeth: support native XDP and register memory model
libeth: convert to netmem
libeth, libie: clean symbol exports up a little
====================
Link: https://patch.msgid.link/20250616201639.710420-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
atm: Fix uninit and mem accounting leak in vcc_sendmsg().
Patch 1 fixes uninit issue reported by KMSAN, and patch 2 fixes
another issue found by Simon Horman during review for v1 patch.
v1: https://lore.kernel.org/20250613055700.415596-1-kuni1840@gmail.com
====================
Link: https://patch.msgid.link/20250616182147.963333-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by
atm_account_tx().
It is expected to be reverted by atm_pop_raw() later called by
vcc->dev->ops->send(vcc, skb).
However, vcc_sendmsg() misses the same revert when copy_from_iter_full()
fails, and then we will leak a socket.
Let's factorise the revert part as atm_return_tx() and call it in
the failure path.
Note that the corresponding sk_wmem_alloc operation can be found in
alloc_tx() as of the blamed commit.
$ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20250614161959.GR414686@horms.kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616182147.963333-3-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the splat below. [0]
vcc_sendmsg() copies data passed from userspace to skb and passes
it to vcc->dev->ops->send().
atmtcp_c_send() accesses skb->data as struct atmtcp_hdr after
checking if skb->len is 0, but it's not enough.
Also, when skb->len == 0, skb and sk (vcc) were leaked because
dev_kfree_skb() is not called and sk_wmem_alloc adjustment is missing
to revert atm_account_tx() in vcc_sendmsg(), which is expected
to be done in atm_pop_raw().
Let's properly free skb with an invalid length in atmtcp_c_send().
[0]:
BUG: KMSAN: uninit-value in atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294
atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294
vcc_sendmsg+0xd7c/0xff0 net/atm/common.c:644
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:727
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566
___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
__sys_sendmsg net/socket.c:2652 [inline]
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655
x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4154 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
kmem_cache_alloc_node_noprof+0x818/0xf00 mm/slub.c:4249
kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:579
__alloc_skb+0x347/0x7d0 net/core/skbuff.c:670
alloc_skb include/linux/skbuff.h:1336 [inline]
vcc_sendmsg+0xb40/0xff0 net/atm/common.c:628
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:727
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566
___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
__sys_sendmsg net/socket.c:2652 [inline]
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655
x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 5798 Comm: syz-executor192 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(undef)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+1d3c235276f62963e93a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1d3c235276f62963e93a
Tested-by: syzbot+1d3c235276f62963e93a@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616182147.963333-2-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mark Bloch says:
====================
net/mlx5e: Add support for devmem and io_uring TCP zero-copy
This series adds support for zerocopy rx TCP with devmem and io_uring
for ConnectX7 NICs and above. For performance reasons and simplicity
HW-GRO will also be turned on when header-data split mode is on.
Performance
===========
Test setup:
* CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz (single NUMA)
* NIC: ConnectX7
* Benchmarking tool: kperf [0]
* Single TCP flow
* Test duration: 60s
With application thread and interrupts pinned to the *same* core:
|------+-----------+----------|
| MTU | epoll | io_uring |
|------+-----------+----------|
| 1500 | 61.6 Gbps | 114 Gbps |
| 4096 | 69.3 Gbps | 151 Gbps |
| 9000 | 67.8 Gbps | 187 Gbps |
|------+-----------+----------|
The CPU usage for io_uring is 95%.
Reproduction steps for io_uring:
server --no-daemon -a 2001:db8::1 --no-memcmp --iou --iou_sendzc \
--iou_zcrx --iou_dev_name eth2 --iou_zcrx_queue_id 2
server --no-daemon -a 2001:db8::2 --no-memcmp --iou --iou_sendzc
client --src 2001:db8::2 --dst 2001:db8::1 \
--msg-zerocopy -t 60 --cpu-min=2 --cpu-max=2
Patch overview:
================
First, a netmem API for skb_can_coalesce is added to the core to be able
to do skb fragment coalescing on netmems.
The next patches introduce some cleanups in the internal SHAMPO code and
improvements to hw gro capability checks in FW.
A separate page_pool is introduced for headers, to be used only when
the rxq has a memory provider.
Then the driver is converted to use the netmem API and to allow support
for unreadable netmem page pool.
The queue management ops are implemented.
Finally, the tcp-data-split ring parameter is exposed.
References
==========
[0] kperf: git://git.kernel.dk/kperf.git
v1: https://lore.kernel.org/20250116215530.158886-1-saeed@kernel.org
v2: https://lore.kernel.org/1747950086-1246773-1-git-send-email-tariqt@nvidia.com
v3: https://lore.kernel.org/20250609145833.990793-1-mbloch@nvidia.com
v4: https://lore.kernel.org/20250610150950.1094376-1-mbloch@nvidia.com
v5: https://lore.kernel.org/20250612154648.1161201-1-mbloch@nvidia.com
====================
Link: https://patch.msgid.link/20250616141441.1243044-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Declare netmem TX support in netdev.
As required, use the netmem aware dma unmapping APIs
for unmapping netmems in tx completion path.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-13-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mlx5, tcp header-data split requires HW GRO to be on.
Enabling it fails when HW GRO is off.
mlx5e_fix_features now keeps HW GRO on when tcp data split is enabled.
Finally, when tcp data split is disabled, features are updated to maybe
remove the forced HW GRO.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-12-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bulk of the work is done in mlx5e_queue_mem_alloc, where we allocate
and create the new channel resources, similar to
mlx5e_safe_switch_params, but here we do it for a single channel using
existing params, sort of a clone channel.
To swap the old channel with the new one, we deactivate and close the
old channel then replace it with the new one, since the swap procedure
doesn't fail in mlx5, we do it all in one place (mlx5e_queue_start).
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250616141441.1243044-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On netdev_rx_queue_restart, a special type of page pool maybe expected.
In this patch declare support for UNREADABLE netmem iov pages in the
pool params only when header data split shampo RQ mode is enabled, also
set the queue index in the page pool params struct.
Shampo mode requirement: Without header split rx needs to peek at the data,
we can't do UNREADABLE_NETMEM.
The patch also enables the use of a separate page pool for headers when
a memory provider is installed for the queue, otherwise the same common
page pool continues to be used.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
