| Age | Commit message (Collapse) | Author |
|---|
|
BT_SK_PA_SYNC is only valid for Broadcast Sinks which means socket used
for Broadcast Sources wouldn't be able to use the likes of getpeername
to read out the sockaddr_iso_bc fields which may have been update (e.g.
bc_sid).
Fixes: 0a766a0affb5 ("Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit.
Link: https://github.com/bluez/bluez/issues/1117#issuecomment-2958244066
Fixes: 01ce70b0a274 ("Bluetooth: eir: Move EIR/Adv Data functions to its own file")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When using and existing adv_info instance for broadcast source it
needs to be updated to periodic first before it can be reused, also in
case the existing instance already have data hci_set_adv_instance_data
cannot be used directly since it would overwrite the existing data so
this reappend the original data after the Broadcast ID, if one was
generated.
Example:
bluetoothctl># Add PBP to EA so it can be later referenced as the BIS ID
bluetoothctl> advertise.service 0x1856 0x00 0x00
bluetoothctl> advertise on
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 13
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x09
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
...
bluetoothctl># Attempt to acquire Broadcast Source transport
bluetoothctl>transport.acquire /org/bluez/hci0/pac_bcast0/fd0
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 255
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x0e
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID: 11371620 (0xad8464)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Link: https://github.com/bluez/bluez/issues/1117
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This commit introduces a new vmtest.sh runner for vsock.
It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H,
H2G, and loopback. The testing tools from tools/testing/vsock/ are
reused. Currently, only vsock_test is used.
VMCI and hyperv support is included in the config file to be built with
the -b option, though not used in the tests.
Only tested on x86.
To run:
$ make -C tools/testing/selftests TARGETS=vsock
$ tools/testing/selftests/vsock/vmtest.sh
or
$ make -C tools/testing/selftests TARGETS=vsock run_tests
Example runs (after make -C tools/testing/selftests TARGETS=vsock):
$ ./tools/testing/selftests/vsock/vmtest.sh
1..3
ok 0 vm_server_host_client
ok 1 vm_client_host_server
ok 2 vm_loopback
SUMMARY: PASS=3 SKIP=0 FAIL=0
Log: /tmp/vsock_vmtest_m7DI.log
$ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback
1..1
ok 0 vm_loopback
SUMMARY: PASS=1 SKIP=0 FAIL=0
Log: /tmp/vsock_vmtest_a1IO.log
$ mkdir -p ~/scratch
$ make -C tools/testing/selftests install TARGETS=vsock INSTALL_PATH=~/scratch
[... omitted ...]
$ cd ~/scratch
$ ./run_kselftest.sh
TAP version 13
1..1
# timeout set to 300
# selftests: vsock: vmtest.sh
# 1..3
# ok 0 vm_server_host_client
# ok 1 vm_client_host_server
# ok 2 vm_loopback
# SUMMARY: PASS=3 SKIP=0 FAIL=0
# Log: /tmp/vsock_vmtest_svEl.log
ok 1 selftests: vsock: vmtest.sh
Future work can include vsock_diag_test.
Because vsock requires a VM to test anything other than loopback, this
patch adds vmtest.sh as a kselftest itself. This is different than other
systems that have a "vmtest.sh", where it is used as a utility script to
spin up a VM to run the selftests as a guest (but isn't hooked into
kselftest).
Signed-off-by: Bobby Eshleman <bobbyeshleman@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250609-vsock-vmtest-v10-1-7f37198e1cd4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.
Fixes: 8f9ae5b3ae80 ("Bluetooth: eir: Add helpers for managing service data")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Convert the PMEM device tree binding from text to YAML. This will allow
device trees with pmem-region nodes to pass dtbs_check.
[iweiny: fix ups from Rob/Drew]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250606184405.359812-4-drew@pdp7.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
Invert the FINAL_PUT bit so that test_bit_acquire and clear_bit_unlock
can be used instead of smp_mb.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During platform init, SNP initialization may fail for several reasons,
such as firmware command failures and incompatible versions. However,
the KVM capability may continue to advertise support for it.
The platform may have SNP enabled but if SNP_INIT fails then SNP is
not supported by KVM.
During KVM module initialization query the SNP platform status to obtain
the SNP initialization state and use it as an additional condition to
determine support for SEV-SNP.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Pavan Kumar Paluri <papaluri@amd.com>
Message-ID: <20250512221634.12045-1-Ashish.Kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #2
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
|
|
igc already supports enabling MAC Merge for FPE. This patch adds
support for preemptible queues in mqprio.
Tested preemption with mqprio by:
1. Enable FPE:
ethtool --set-mm enp1s0 pmac-enabled on tx-enabled on verify-enabled on
2. Enable preemptible queue in mqprio:
mqprio num_tc 4 map 0 1 2 3 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Changes:
1. Introduce tx_enabled flag to control preemptible queue. tx_enabled
is set via mmsv module based on multiple factors, including link
up/down status, to determine if FPE is active or inactive.
2. Add priority field to TXDCTL for express queue to improve data
fetch performance.
3. Block preemptible queue setup in taprio unless reverse-tsn-txq-prio
private flag is set. Encourages adoption of standard queue priority
scheme for new features.
4. Hardware-padded frames from preemptible queues result in incorrect
mCRC values, as padding bytes are excluded from the computation. Pad
frames to at least 60 bytes using skb_padto() before transmission to
ensure the hardware includes padding in the mCRC calculation.
Tested preemption with taprio by:
1. Enable FPE:
ethtool --set-mm enp1s0 pmac-enabled on tx-enabled on verify-enabled on
2. Enable private flag to reverse TX queue priority:
ethtool --set-priv-flags enp1s0 reverse-txq-prio on
3. Enable preemptible queue in taprio:
taprio num_tc 4 map 0 1 2 3 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
By default, igc assigns TX hw queue 0 the highest priority and queue 3
the lowest. This is opposite of most NICs, where TX hw queue 3 has the
highest priority and queue 0 the lowest.
mqprio in igc already uses TX arbitration unconditionally to reverse TX
queue priority when mqprio is enabled. The TX arbitration logic does not
require a private flag, because mqprio was added recently and no known
users depend on the default queue ordering, which differs from the typical
convention.
taprio does not use TX arbitration, so it inherits the default igc TX
queue priority order. This causes tc command inconsistencies when
configuring frame preemption with taprio compared to mqprio in igc.
Other tc command inconsistencies and configuration issues already exist
when using taprio on igc compared to other network controllers. These
issues are described in a later section.
To harmonize TX queue priority behavior between taprio and mqprio, and
to fix these issues without breaking long-standing taprio use cases,
this patch adds a new private flag, called reverse-tsn-txq-prio, to
reverse the TX queue priority. It makes queue 3 the highest and queue 0
the lowest, reusing the TX arbitration logic already used by mqprio.
Users must set the private flag when enabling frame preemption with
taprio to follow the standard convention. Doing so promotes adoption of
the correct priority model for new features while preserving
compatibility with legacy configurations.
This new private flag addresses:
1. Non-standard socket -> tc -> TX hw queue mapping for taprio in igc
Without the private flag:
- taprio maps (socket -> tc -> TX hardware queue) differently on igc
compared to other network controllers
- On igc, mqprio maps tc differently from taprio, since mqprio already
uses TX arbitration
The following examples compare taprio configuration on igc and other
network controllers:
a) On other NICs (TX hw queue 3 is highest priority):
taprio num_tc 4 map 0 1 2 3 .... \
queues 1@0 1@1 1@2 1@3
Mapping translates to:
socket 0 -> tc 0 -> queue 0
socket 3 -> tc 3 -> queue 3
This is the normal mapping that respects the standard convention:
higher socket number -> higher tc -> higher priority TX hw queue
b) On igc (TX hw queue 0 is highest priority by default):
taprio num_tc 4 map 3 2 1 0 .... \
queues 1@0 1@1 1@2 1@3
Mapping translates to:
socket 0 -> tc 3 -> queue 3
socket 3 -> tc 0 -> queue 0
This igc tc mapping example is based on Intel's TSN validation test
case, where a higher socket priority maps to a higher priority queue.
It respects the mapping:
higher socket number -> higher priority TX hw queue
but breaks the expected ordering:
higher tc -> higher priority TX hw queue
as defined in [Ref1]. This custom mapping complicates common taprio
setup across NICs.
2. Non-standard frame preemption mapping for taprio in igc
Without the private flag:
- Compared to other network controllers, taprio on igc must flip the
expected fp sequence, since express traffic is expected to map to the
highest priority queue and preemptible traffic to lower ones
- On igc, frame preemption configuration for mqprio differs from taprio,
since mqprio already uses TX arbitration
The following examples compare taprio frame preemption configuration on
igc and other network controllers:
a) On other NICs (TX hw queue 3 is highest priority):
taprio num_tc 4 map ..... \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Mapping translates to:
tc0, tc1, tc2 -> preemptible -> queue 0, 1, 2
tc3 -> express -> queue 3
This is the normal mapping that respects the standard convention:
higher tc -> express traffic -> higher priority TX hw queue
lower tc -> preemptible traffic -> lower priority TX hw queue
b) On igc (TX hw queue 0 is highest priority by default):
taprio num_tc 4 map ...... \
queues 1@0 1@1 1@2 1@3 \
fp E P P P
Mapping translates to:
tc0 -> express -> queue 0
tc1, tc2, tc3 -> preemptible -> queue 1, 2, 3
This inversion respects the mapping of:
express traffic -> higher priority TX hw queue
but breaks the expected ordering:
higher tc -> express traffic
as defined in [Ref1] where higher tc indicates higher priority. In
this case, the lower tc0 is assigned to express traffic. This custom
mapping further complicates common preemption setup across NICs.
Tests were performed on taprio with the following combinations, where
two apps send traffic simultaneously on different queues:
Private Flag Traffic Sent By Traffic Sent By
----------------------------------------------------------------
enabled iperf3 (queue 3) iperf3 (queue 0)
disabled iperf3 (queue 0) iperf3 (queue 3)
enabled iperf3 (queue 3) real-time app (queue 0)
disabled iperf3 (queue 0) real-time app (queue 3)
enabled real-time app (queue 3) iperf3 (queue 0)
disabled real-time app (queue 0) iperf3 (queue 3)
enabled real-time app (queue 3) real-time app (queue 0)
disabled real-time app (queue 0) real-time app (queue 3)
Private flag is controlled with:
ethtool --set-priv-flags enp1s0 reverse-tsn-txq-prio <on|off>
[Ref1]
IEEE 802.1Q clause 8.6.8 Transmission selection:
"For a given Port and traffic class, frames are selected from the
corresponding queue for transmission if and only if:
...
b) For each queue corresponding to a numerically higher value of traffic
class supported by the Port, the operation of the transmission selection
algorithm supported by that queue determines that there is no frame
available for transmission."
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Previously, TX arbitration prioritized queues based on the TC they were
mapped to. A queue mapped to TC 3 had higher priority than one mapped to
TC 0.
To improve code reuse for upcoming patches and align with typical NIC
behavior, this patch updates the logic to prioritize higher queue numbers
when mqprio is used. As a result, queue 0 becomes the lowest priority and
queue 3 becomes the highest.
This patch also introduces igc_tsn_is_tc_to_queue_priority_ordered() to
preserve the original TC-based priority rule and reject configurations
where a higher TC maps to a lower queue offset.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Refactor TXDCTL macro handling to use FIELD_PREP and GENMASK macros.
This prepares the code for adding a new TXDCTL priority field in an
upcoming patch.
Verified that the macro values remain unchanged before and after
refactoring.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Rename macros to use the DCTL prefix for consistency with existing
macros that reference the same register. This prepares for an upcoming
patch that adds new fields to TXDCTL.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move and consolidate TXDCTL and RXDCTL macros in preparation for
upcoming TXDCTL changes. This improves organization and readability.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If reset_control_acquire() fails, then we can't return directly.
We need to do a little clean up first.
Fixes: cf2c3eceb757 ("spi: stm32-ospi: Make usage of reset_control_acquire/release() API")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aEmAGTUzzKZlLe3K@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Previously, the block layer stored the requests in the plug list in
LIFO order. For this reason, blk_attempt_plug_merge() would check
just the head entry for a back merge attempt, and abort after that
unless requests for multiple queues existed in the plug list. If more
than one request is present in the plug list, this makes the one-shot
back merging less useful than before, as it'll always fail to find a
quick merge candidate.
Use the tail entry for the one-shot merge attempt, which is the last
added request in the list. If that fails, abort immediately unless
there are multiple queues available. If multiple queues are available,
then scan the list. Ideally the latter scan would be a backwards scan
of the list, but as it currently stands, the plug list is singly linked
and hence this isn't easily feasible.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/20250611121626.7252-1-abuehaze@amazon.com/
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Fixes: e70c301faece ("block: don't reorder requests in blk_add_rq_to_plug")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bios queued up in the zone write plug have already gone through all all
preparation in the submit_bio path, including the freeze protection.
Submitting them through submit_bio_noacct_nocheck duplicates the work
and can can cause deadlocks when freezing a queue with pending bio
write plugs.
Go straight to ->submit_bio or blk_mq_submit_bio to bypass the
superfluous extra freeze protection and checks.
Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250611044416.2351850-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When blk_zone_write_plug_bio_endio() is called for a regular write BIO
used to emulate a zone append operation, that is, a BIO flagged with
BIO_EMULATES_ZONE_APPEND, the BIO operation code is restored to the
original REQ_OP_ZONE_APPEND but the BIO_EMULATES_ZONE_APPEND flag is not
cleared. Clear it to fully return the BIO to its orginal definition.
Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250611005915.89843-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document recently merged feature auto buffer registration(UBLK_F_AUTO_BUF_REG).
Cc: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250611085632.109719-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It isn't necessary to freeze queue for updating disk size given submit_bio()
doesn't grab queue usage counter for checking eod.
Also many driver won't freeze queue for calling set_capacity_and_notify().
Move lo_set_size() out of queue freeze for fixing many lockdep warning
report.
Link: https://lore.kernel.org/linux-block/67ea99e0.050a0220.3c3d88.0042.GAE@google.com/
Reported-by: syzbot+9dd7dbb1a4b915dee638@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250611084938.108829-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: 1ffe09590121 ("udmabuf: fix dma-buf cpu access")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250507160913.2084079-3-m.szyprowski@samsung.com
|
|
Fix the TODO in ahci_broken_lpm() by using the proper BIOS build date.
The proper BIOS build date was provided by Hans, see Link.
Link: https://lore.kernel.org/linux-ide/6ea509c8-b38d-4941-8a29-c1117ff3dd5b@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610110757.1318959-6-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
pci_request_regions() became a managed devres functions if the PCI
device was enabled with pcim_enable_device(), which is the case for
pata_macio.
The PCI subsystem recently removed this hybrid feature from
pci_request_region(). When doing so, pata_macio was forgotten to be
ported to use pcim_request_all_regions(). If that function is not used,
pata_macio will fail on driver-reload because the PCI regions will
remain blocked.
Fix the region leak by replacing pci_request_regions() with its managed
counterpart, pcim_request_all_regions().
Fixes: 51f6aec99cb0 ("PCI: Remove hybrid devres nature from request functions")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250610135413.35930-2-phasta@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
The recent change from using d_hash_and_lookup() to using
try_lookup_noperm() inadvertently introduce a d_revalidate() call when
the lookup was successful. Steven French reports that this resulted in
worse than halving of performance in some cases.
Prior to the offending patch the only caller of try_lookup_noperm() was
autofs which does not need the d_revalidate(). So it is safe to remove
the d_revalidate() call providing we stop using try_lookup_noperm() to
implement lookup_noperm().
The "try_" in the name is strongly suggestive that the caller isn't
expecting much effort, so it seems reasonable to avoid the effort of
d_revalidate().
Fixes: 06c567403ae5 ("Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS")
Reported-by: Steve French <smfrench@gmail.com>
Link: https://lore.kernel.org/all/CAH2r5mu5SfBrdc2CFHwzft8=n9koPMk+Jzwpy-oUMx-wCRCesQ@mail.gmail.com/
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/174951744454.608730.18354002683881684261@noble.neil.brown.name
Tested-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make sure all values are covered.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250610140020.2227932-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Smatch pointed out this trivial typo:
drivers/dma-buf/dma-buf.c:1123 dma_buf_map_attachment()
warn: passing positive error code '16' to 'ERR_PTR'
drivers/dma-buf/dma-buf.c
1113 dma_resv_assert_held(attach->dmabuf->resv);
1114
1115 if (dma_buf_pin_on_map(attach)) {
1116 ret = attach->dmabuf->ops->pin(attach);
1117 /*
1118 * Catch exporters making buffers inaccessible even when
1119 * attachments preventing that exist.
1120 */
1121 WARN_ON_ONCE(ret == EBUSY);
^^^^^
This was probably intended to be -EBUSY?
1122 if (ret)
--> 1123 return ERR_PTR(ret);
^^^
Otherwise we will eventually crash.
1124 }
1125
1126 sg_table = attach->dmabuf->ops->map_dma_buf(attach, direction);
1127 if (!sg_table)
1128 sg_table = ERR_PTR(-ENOMEM);
1129 if (IS_ERR(sg_table))
1130 goto error_unpin;
1131
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250605085336.62156-1-christian.koenig@amd.com
|
|
The nl80211_parse_connkeys() function currently uses kfree() to release
the 'result' structure in error handling paths. However, if an error
occurs due to result->def being less than 0, the 'result' structure may
contain sensitive information.
To prevent potential leakage of sensitive data, replace kfree() with
kfree_sensitive() when freeing 'result'. This change aligns with the
approach used in its caller, nl80211_join_ibss(), enhancing the overall
security of the wireless subsystem.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20250523110156.4017111-1-zilin@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git updates for v6.16-rc2
Fix a handful of both build and stability issues across multiple drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The changes I made in
wifi: iwlwifi: don't warn if the NIC is gone in resume
conflicted with a major rework done in this area.
The merge de-facto removed my changes.
Re-add them.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250603091754.70182-1-emmanuel.grumbach@intel.com
Fixes: 06c4b2036818 ("Merge tag 'iwlwifi-next-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth
issue.")
That commit introduces a regression, when HT40 mode is enabled,
received packets are lost, this was experience with W8997 with both
SDIO-UART and SDIO-SDIO variants. From an initial investigation the
issue solves on its own after some time, but it's not clear what is
the reason. Given that this was just a performance optimization, let's
revert it till we have a better understanding of the issue and a proper
fix.
Cc: Jeff Chen <jeff.chen_1@nxp.com>
Cc: stable@vger.kernel.org
Fixes: 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth issue.")
Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250605130302.55555-1-francesco@dolcini.it
[fix commit reference format]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The commit d6d1e3e6580c ("mm/execmem: Unify early execmem_cache
behaviour") changed early behaviour of execemem ROX cache to allow its
usage in early x86 code that allocates text pages when
CONFIG_MITGATION_ITS is enabled.
The permission management of the pages allocated from execmem for ITS
mitigation is now completely contained in arch/x86/kernel/alternatives.c
and therefore there is no need to special case early allocations in
execmem.
This reverts commit d6d1e3e6580ca35071ad474381f053cbf1fb6414.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250603111446.2609381-6-rppt@kernel.org
|
|
execmem_alloc() sets permissions differently depending on the kernel
configuration, CPU support for PSE and whether a page is allocated
before or after mark_rodata_ro().
Add tracking for pages allocated for ITS when patching the core kernel
and make sure the permissions for ITS pages are explicitly managed for
both kernel and module allocations.
Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250603111446.2609381-5-rppt@kernel.org
|
|
The of pages with ITS thunks allocated for modules are tracked by an
array in 'struct module'.
Since this is very architecture specific data structure, move it to
'struct mod_arch_specific'.
No functional changes.
Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250603111446.2609381-4-rppt@kernel.org
|
|
Currently ROX cache in execmem is enabled regardless of
STRICT_MODULE_RWX setting. This breaks an assumption that module memory
is writable when STRICT_MODULE_RWX is disabled, for instance for kernel
debuggin.
Only enable ROX cache in execmem when STRICT_MODULE_RWX is set to
restore the original behaviour of module text permissions.
Fixes: 64f6a4e10c05 ("x86: re-enable EXECMEM_ROX support")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250603111446.2609381-3-rppt@kernel.org
|
|
Collapsing pages to a leaf PMD or PUD should be done only if
X86_FEATURE_PSE is available, which is not the case when running e.g.
as a Xen PV guest.
Fixes: 41d88484c71c ("x86/mm/pat: restore large ROX pages after fragmentation")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250528123557.12847-3-jgross@suse.com
|
|
According to 802.1AE standard, when ES and SC flags in TCI are zero,
used SCI should be the current active SC_RX. Current code uses the
header MAC address. Without this patch, when ES flag is 0 (using a
bridge or switch), header MAC will not fit the SCI and MACSec frames
will be discarted.
In order to test this issue, MACsec link should be stablished between
two interfaces, setting SC and ES flags to zero and a port identifier
different than one. For example, using ip macsec tools:
ip link add link $ETH0 macsec0 type macsec port 11 send_sci off
end_station off
ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY
ip macsec add macsec0 rx port 11 address $ETH1_MAC
ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02
ip link set dev macsec0 up
ip link add link $ETH1 macsec1 type macsec port 11 send_sci off
end_station off
ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY
ip macsec add macsec1 rx port 11 address $ETH0_MAC
ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02
ip link set dev macsec1 up
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver requires of_get_display_timing() from
CONFIG_VIDEOMODE_HELPERS but does not select it. If no other driver
selects it, there will be a failure from the linker if the driver is
built in or modpost if it is a module.
ERROR: modpost: "of_get_display_timing" [drivers/gpu/drm/sitronix/st7571-i2c.ko] undefined!
Select CONFIG_VIDEOMODE_HELPERS to resolve the build failure.
Fixes: 4b35f0f41ee2 ("drm/st7571-i2c: add support for Sitronix ST7571 LCD controller")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250610-drm-st7571-i2c-select-videomode-helpers-v1-1-d30b50ff6e64@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The HKDF self-tests depend on the HMAC algorithms being registered.
HMAC is now registered at module_init, which put it at the same level as
HKDF. Move HKDF to late_initcall so that it runs afterwards.
Fixes: ef93f1562803 ("Revert "crypto: run initcalls for generic implementations earlier"")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix RX_DONE_INT_MASK definition in order to enable RX queues 16-31.
Fixes: f252493e18353 ("net: airoha: Enable multiple IRQ lines support in airoha_eth driver.")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250609-aioha-fix-rx-queue-mask-v1-1-f33706a06fa2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce flowtable hw acceleration for PPPoE traffic.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250609-b4-airoha-flowtable-pppoe-v1-1-1520fa7711b4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most of the packetdrill tests have not flaked once last week.
Add the few which did to the XFAIL list.
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610000001.1970934-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Once the THREADED napi is disabled, the napi kthread should also be
stopped. Keeping the kthread intact after disabling THREADED napi makes
the PID of this kthread show up in the output of netlink 'napi-get' and
ps -ef output.
The is discussed in the patch below:
https://lore.kernel.org/all/20250502191548.559cc416@kernel.org
NAPI kthread should stop only if,
- There are no pending napi poll scheduled for this thread.
- There are no new napi poll scheduled for this thread while it has
stopped.
- The ____napi_schedule can correctly fallback to the softirq for napi
polling.
Since napi_schedule_prep provides mutual exclusion over STATE_SCHED bit,
it is safe to unset the STATE_THREADED when SCHED_THREADED is set or the
SCHED bit is not set. SCHED_THREADED being set means that SCHED is
already set and the kthread owns this napi.
To disable threaded napi, unset STATE_THREADED bit safely if
SCHED_THREADED is set or SCHED is unset. Once STATE_THREADED is unset
safely then wait for the kthread to unset the SCHED_THREADED bit so it
safe to stop the kthread.
Add a new test in nl_netdev to verify this behaviour.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..6
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.nsim_rxq_reset_down
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Ran neper for 300 seconds and did enable/disable of thread napi in a
loop continuously.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250609173015.3851695-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable memory-mapped I/O access to RMON statistics registers for devices
known to work correctly. Currently, only the D-Link DGE-550T (`0x4000`)
with PCI revision A3 (`0x0c`) is allowed.
To avoid issues on other hardware, a runtime check was added to restrict
MMIO usage. The `MEM_MAPPING` macro was removed in favor of runtime
detection.
To access RMON registers, the code `dw32(RmonStatMask, 0x0007ffff);`
must also be skipped, so this patch conditionally disables it as well.
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Link: https://patch.msgid.link/20250610000130.49065-2-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before appending sysdata, prepare_extradata() checks if any feature is
enabled in sysdata_fields (and exits early if none is enabled).
When SYSDATA_RELEASE was introduced, we missed adding it to the list of
features being checked against sysdata_fields in prepare_extradata().
The result was that, if only SYSDATA_RELEASE is enabled in
sysdata_fields, we incorreclty exit early and fail to append the
release.
Instead of checking specific bits in sysdata_fields, check if
sysdata_fields has ALL bit zeroed and exit early if true. This fixes
case when only SYSDATA_RELEASE enabled and makes the code more general /
less error prone in future feature implementation.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Fixes: cfcc9239e78a ("netconsole: append release to sysdata")
Link: https://patch.msgid.link/20250609-netconsole-fix-v1-1-17543611ae31@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-06-10
The first 4 patches are by Vincent Mailhol and prepare the CAN netlink
interface for the introduction of CAN XL configuration.
Geert Uytterhoeven's patch updates the CAN networking documentation.
The last 2 patched are by Davide Caratti and introduce skb drop
reasons in the receive path of several CAN protocols.
* tag 'linux-can-next-for-6.17-20250610' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: add drop reasons in CAN protocols receive path
can: add drop reasons in the receive path of AF_CAN
documentation: networking: can: Document alloc_candev_mqs()
can: netlink: can_changelink(): rename tdc_mask into fd_tdc_flag_provided
can: bittiming: rename can_tdc_is_enabled() into can_fd_tdc_is_enabled()
can: bittiming: rename CAN_CTRLMODE_TDC_MASK into CAN_CTRLMODE_FD_TDC_MASK
can: netlink: replace tabulation by space in assignment
====================
Link: https://patch.msgid.link/20250610094933.1593081-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
