summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-13KVM: nVMX: use correct clean fields when copying from eVMCSVitaly Kuznetsov
Unfortunately, a couple of mistakes were made while implementing Enlightened VMCS support, in particular, wrong clean fields were used in copy_enlightened_to_vmcs12(): - exception_bitmap is covered by CONTROL_EXCPN; - vm_exit_controls/pin_based_vm_exec_control/secondary_vm_exec_control are covered by CONTROL_GRP1. Fixes: 945679e301ea0 ("KVM: nVMX: add enlightened VMCS state") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-13vfio-ccw: Destroy kmem cache region on module exitFarhan Ali
Free the vfio_ccw_cmd_region on module exit. Fixes: d5afd5d135c8 ("vfio-ccw: add handling for async channel instructions") Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Message-Id: <c0f39039d28af39ea2939391bf005e3495d890fd.1559576250.git.alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-13ALSA: hda/hdmi - consider eld_valid also in sync_eld_via_acomp()Jaroslav Kysela
In the commit 7f641e26a6df9269cb25dd7a4b0a91d6586ed441 (ALSA: hda/hdmi - Consider eld_valid when reporting jack event) the eld_valid check was added for the jack event reports. Do the same in sync_eld_via_acomp() function. Apparently, it is required for the NVIDIA proprietary driver (monitor presence reported first, but ELD is available later). Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-13MAINTAINERS: Add maintainer entry for the imx8 DDR PMU driverFrank Li
Frank Li wrote the imx8 DDR PMU driver and has access to the hardware, so add him as maintainer for the files in question. Signed-off-by: Frank Li <Frank.Li@nxp.com> [will: fixed case of title] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-13drivers/perf: imx_ddr: Add DDR performance counter support to perfFrank Li
Add DDR performance monitor support for iMX8QXP. The PMU consists of 3 programmable event counters and a single dedicated cycle counter. Example usage: $ perf stat -a -e \ imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/,imx8_ddr0/precharge/ ls - or - $ perf stat -a -e \ imx8_ddr0/cycles/,imx8_ddr0/read-access/,imx8_ddr0/write-access/ ls Other events are supported, and advertised via perf list. Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [will: rewrote commit message/kconfig and used #defines for dev/cpuhp names] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-13Merge tag 'drm-intel-fixes-2019-06-13' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.2-rc5: - Fix DMC firmware input validation to avoid buffer overflow - Fix perf register access whitelist for userspace - Fix DSI panel on GPD MicroPC - Fix per-pixel alpha with CCS - Fix HDMI audio for SDVO Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y325x22w.fsf@intel.com
2019-06-13dt-bindings: perf: imx8-ddr: add imx8qxp ddr performance monitorFrank Li
Add binding documentation for the imx8qxp DDR performance monitor unit. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> [will: Removed trailing newline] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-13ALSA: hda: remove an unused field from struct hda_codecGuennadi Liakhovetski
The .jacks field in struct hda_codec is unused and seems to be a duplicate of .jacktbl, remove it. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-13ALSA: hda: Add Elkhart Lake PCI IDLai, Poey Seng
Add HD Audio Device PCI ID for the Intel Elkhart Lake platform. Signed-off-by: Lai, Poey Seng <poey.seng.lai@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-13block/ps3vram: Use %llu to format sector_t after LBDAF removalGeert Uytterhoeven
The removal of CONFIG_LBDAF changed the type of sector_t from "unsigned long" to "u64" aka "unsigned long long" on 64-bit platforms, leading to a compiler warning regression: drivers/block/ps3vram.c: In function ‘ps3vram_probe’: drivers/block/ps3vram.c:770:23: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘sector_t {aka long long unsigned int}’ [-Wformat=] Fix this by using "%llu" instead. Fixes: 72deb455b5ec619f ("block: remove CONFIG_LBDAF") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13libata: Extend quirks for the ST1000LM024 drives with NOLPM quirkHans de Goede
We've received a bugreport that using LPM with ST1000LM024 drives leads to system lockups. So it seems that these models are buggy in more then 1 way. Add NOLPM quirk to the existing quirks entry for BROKEN_FPDMA_AA. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330 Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13bcache: only set BCACHE_DEV_WB_RUNNING when cached device attachedColy Li
When people set a writeback percent via sysfs file, /sys/block/bcache<N>/bcache/writeback_percent current code directly sets BCACHE_DEV_WB_RUNNING to dc->disk.flags and schedules kworker dc->writeback_rate_update. If there is no cache set attached to, the writeback kernel thread is not running indeed, running dc->writeback_rate_update does not make sense and may cause NULL pointer deference when reference cache set pointer inside update_writeback_rate(). This patch checks whether the cache set point (dc->disk.c) is NULL in sysfs interface handler, and only set BCACHE_DEV_WB_RUNNING and schedule dc->writeback_rate_update when dc->disk.c is not NULL (it means the cache device is attached to a cache set). This problem might be introduced from initial bcache commit, but commit 3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly") changes part of the original code piece, so I add 'Fixes: 3fd47bfe55b0' to indicate from which commit this patch can be applied. Fixes: 3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly") Reported-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Bjørn Forsman <bjorn.forsman@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13bcache: fix stack corruption by PRECEDING_KEY()Coly Li
Recently people report bcache code compiled with gcc9 is broken, one of the buggy behavior I observe is that two adjacent 4KB I/Os should merge into one but they don't. Finally it turns out to be a stack corruption caused by macro PRECEDING_KEY(). See how PRECEDING_KEY() is defined in bset.h, 437 #define PRECEDING_KEY(_k) \ 438 ({ \ 439 struct bkey *_ret = NULL; \ 440 \ 441 if (KEY_INODE(_k) || KEY_OFFSET(_k)) { \ 442 _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0); \ 443 \ 444 if (!_ret->low) \ 445 _ret->high--; \ 446 _ret->low--; \ 447 } \ 448 \ 449 _ret; \ 450 }) At line 442, _ret points to address of a on-stack variable combined by KEY(), the life range of this on-stack variable is in line 442-446, once _ret is returned to bch_btree_insert_key(), the returned address points to an invalid stack address and this address is overwritten in the following called bch_btree_iter_init(). Then argument 'search' of bch_btree_iter_init() points to some address inside stackframe of bch_btree_iter_init(), exact address depends on how the compiler allocates stack space. Now the stack is corrupted. Fixes: 0eacac22034c ("bcache: PRECEDING_KEY()") Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Rolf Fokkens <rolf@rolffokkens.nl> Reviewed-by: Pierre JUHEN <pierre.juhen@orange.fr> Tested-by: Shenghui Wang <shhuiw@foxmail.com> Tested-by: Pierre JUHEN <pierre.juhen@orange.fr> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Nix <nix@esperi.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13arm64/sve: Fix missing SVE/FPSIMD endianness conversionsDave Martin
The in-memory representation of SVE and FPSIMD registers is different: the FPSIMD V-registers are stored as single 128-bit host-endian values, whereas SVE registers are stored in an endianness-invariant byte order. This means that the two representations differ when running on a big-endian host. But we blindly copy data from one representation to another when converting between the two, resulting in the register contents being unintentionally byteswapped in certain situations. Currently this can be triggered by the first SVE instruction after a syscall, for example (though the potential trigger points may vary in future). So, fix the conversion functions fpsimd_to_sve(), sve_to_fpsimd() and sve_sync_from_fpsimd_zeropad() to swab where appropriate. There is no common swahl128() or swab128() that we could use here. Maybe it would be worth making this generic, but for now add a simple local hack. Since the byte order differences are exposed in ABI, also clarify the documentation. Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Alan Hayward <alan.hayward@arm.com> Cc: Julien Grall <julien.grall@arm.com> Fixes: bc0ee4760364 ("arm64/sve: Core task context handling") Fixes: 8cd969d28fd2 ("arm64/sve: Signal handling support") Fixes: 43d4da2c45b2 ("arm64/sve: ptrace and ELF coredump support") Signed-off-by: Dave Martin <Dave.Martin@arm.com> [will: Fix typos in comments and docs spotted by Julien] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-13blk-mq: remove WARN_ON(!q->elevator) from blk_mq_sched_free_requestsMing Lei
blk_mq_sched_free_requests() may be called in failure path in which q->elevator may not be setup yet, so remove WARN_ON(!q->elevator) from blk_mq_sched_free_requests for avoiding the false positive. This function is actually safe to call in case of !q->elevator because hctx->sched_tags is checked. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Yi Zhang <yi.zhang@redhat.com> Fixes: c3e2219216c9 ("block: free sched's request pool in blk_cleanup_queue") Reported-by: syzbot+b9d0d56867048c7bcfde@syzkaller.appspotmail.com Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13blkio-controller.txt: Remove references to CFQAndreas Herrmann
CFQ is gone. No need anymore to document its "proportional weight time based division of disk policy". Signed-off-by: Andreas Herrmann <aherrmann@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13block/switching-sched.txt: Update to blk-mq schedulersAndreas Herrmann
Remove references to CFQ and legacy block layer which are gone. Update example with what's available under blk-mq. Signed-off-by: Andreas Herrmann <aherrmann@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13null_blk: remove duplicate check for report zoneChaitanya Kulkarni
This patch removes the check in the null_blk_zoned for report zone command, where it checks for the dev-,>zoned before executing the report zone. The null_zone_report() function is a block_device operation callback which is initialized in the null_blk_main.c and gets called as a part of blkdev for report zone IOCTL (BLKREPORTZONE). blkdev_ioctl() blkdev_report_zones_ioctl() blkdev_report_zones() blk_report_zones() disk->fops->report_zones() nullb_zone_report(); The null_zone_report() will never get executed on the non-zoned block device, in the non zoned block device blk_queue_is_zoned() will always be false which is first check the blkdev_report_zones_ioctl() before actual low level driver report zone callback is executed. Here is the detailed scenario:- 1. modprobe null_blk null_init null_alloc_dev dev->zoned = 0 null_add_dev dev->zoned == 0 so we don't set the q->limits.zoned = BLK_ZONED_HR 2. blkzone report /dev/nullb0 blkdev_ioctl() blkdev_report_zones_ioctl() blk_queue_is_zoned() blk_queue_is_zoned q->limits.zoned == 0 return false if (!blk_queue_is_zoned(q)) <--- true return -ENOTTY; Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13blk-mq: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. When all of these checks are cleaned up, lots of the functions used in the blk-mq-debugfs code can now return void, as no need to check the return value of them either. Overall, this ends up cleaning up the code and making it smaller, always a nice win. Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13io_uring: fix memory leak of UNIX domain socket inodeEric Biggers
Opening and closing an io_uring instance leaks a UNIX domain socket inode. This is because the ->file of the io_uring instance's internal UNIX domain socket is set to point to the io_uring file, but then sock_release() sees the non-NULL ->file and assumes the inode reference is held by the file so doesn't call iput(). That's not the case here, since the reference is still meant to be held by the socket; the actual inode of the io_uring file is different. Fix this leak by NULL-ing out ->file before releasing the socket. Reported-by: syzbot+111cb28d9f583693aefa@syzkaller.appspotmail.com Fixes: 2b188cc1bb85 ("Add io_uring IO interface") Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13block: force select mq-deadline for zoned block devicesDamien Le Moal
In most use cases of zoned block devices (aka SMR disks), the mq-deadline scheduler is mandatory as it implements sequential write command processing guarantees with zone write locking. So make sure that this scheduler is always enabled if CONFIG_BLK_DEV_ZONED is selected. Tested-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13binder: fix possible UAF when freeing bufferTodd Kjos
There is a race between the binder driver cleaning up a completed transaction via binder_free_transaction() and a user calling binder_ioctl(BC_FREE_BUFFER) to release a buffer. It doesn't matter which is first but they need to be protected against running concurrently which can result in a UAF. Signed-off-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-13backlight: simplify lcd notifierDaniel Vetter
With all the work I've done on replacing fb notifier calls with direct calls into fbcon the backlight/lcd notifier is the only user left. It will only receive events now that it cares about, hence we can remove this check. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-34-daniel.vetter@ffwll.ch
2019-06-13staging/olpc_dcon: Add drm conversion to TODODaniel Vetter
this driver is pretty horrible from a design pov, and needs a complete overhaul. Concrete thing that annoys me is that it looks at registered_fb, which is an internal thing to fbmem.c and fbcon.c. And ofc it gets the lifetime rules all wrong (it should at least use get/put_fb_info). Looking at the history, there's been an attempt at dropping this from staging in 2016, but that had to be reverted. Since then not real effort except the usual stream of trivial patches, and fbdev has been formally closed for any new hw support. Time to try again and drop this? Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jens Frederich <jfrederich@gmail.com> Cc: Daniel Drake <dsd@laptop.org> Cc: Jon Nettleton <jon.nettleton@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-33-daniel.vetter@ffwll.ch
2019-06-13fbcon: Document what I learned about fbcon lockingDaniel Vetter
It's not pretty. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-32-daniel.vetter@ffwll.ch
2019-06-13crypto: sahara - Use devm_platform_ioremap_resource()Fabio Estevam
Use devm_platform_ioremap_resource() to simplify the code a bit. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: mxs-dcp - Use devm_platform_ioremap_resource()Fabio Estevam
Use devm_platform_ioremap_resource() to simplify the code a bit. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: hisilicon - Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header file related to Crypto Drivers for Hisilicon SEC Engine in Hip06 and Hip07. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: qat - use struct_size() helperGustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct qat_alg_buf_list { ... struct qat_alg_buf bufers[]; } __packed __aligned(64); Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(struct qat_alg_buf_list) + ((1 + n) * sizeof(struct qat_alg_buf)) with: struct_size(bufl, bufers, n + 1) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13ARM: dts: imx7ulp: add crypto supportIuliana Prodan
Add crypto node in device tree for CAAM support. Noteworthy is that on 7ulp the interrupt line is shared between the two job rings. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: cavium/nitrox - Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to Crypto Drivers for Cavium Nitrox family CNN55XX devices. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: bcm - Make some symbols staticYueHaibing
Fix sparse warnings: drivers/crypto/bcm/cipher.c:99:6: warning: symbol 'BCMHEADER' was not declared. Should it be static? drivers/crypto/bcm/cipher.c:2096:6: warning: symbol 'spu_no_incr_hash' was not declared. Should it be static? drivers/crypto/bcm/cipher.c:4823:5: warning: symbol 'bcm_spu_probe' was not declared. Should it be static? drivers/crypto/bcm/cipher.c:4867:5: warning: symbol 'bcm_spu_remove' was not declared. Should it be static? drivers/crypto/bcm/spu2.c:52:6: warning: symbol 'spu2_cipher_type_names' was not declared. Should it be static? drivers/crypto/bcm/spu2.c:56:6: warning: symbol 'spu2_cipher_mode_names' was not declared. Should it be static? drivers/crypto/bcm/spu2.c:60:6: warning: symbol 'spu2_hash_type_names' was not declared. Should it be static? drivers/crypto/bcm/spu2.c:66:6: warning: symbol 'spu2_hash_mode_names' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: chacha - constify ctx and iv argumentsEric Biggers
Constify the ctx and iv arguments to crypto_chacha_init() and the various chacha*_stream_xor() functions. This makes it clear that they are not modified. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: chacha20poly1305 - a few cleanupsEric Biggers
- Use sg_init_one() instead of sg_init_table() then sg_set_buf(). - Remove unneeded calls to sg_init_table() prior to scatterwalk_ffwd(). - Simplify initializing the poly tail block. - Simplify computing padlen. This doesn't change any actual behavior. Cc: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: skcipher - make chunksize and walksize accessors internalEric Biggers
The 'chunksize' and 'walksize' properties of skcipher algorithms are implementation details that users of the skcipher API should not be looking at. So move their accessor functions from <crypto/skcipher.h> to <crypto/internal/skcipher.h>. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: skcipher - un-inline encrypt and decrypt functionsEric Biggers
crypto_skcipher_encrypt() and crypto_skcipher_decrypt() have grown to be more than a single indirect function call. They now also check whether a key has been set, and with CONFIG_CRYPTO_STATS=y they also update the crypto statistics. That can add up to a lot of bloat at every call site. Moreover, these always involve a function call anyway, which greatly limits the benefits of inlining. So change them to be non-inline. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: aead - un-inline encrypt and decrypt functionsEric Biggers
crypto_aead_encrypt() and crypto_aead_decrypt() have grown to be more than a single indirect function call. They now also check whether a key has been set, the decryption side checks whether the input is at least as long as the authentication tag length, and with CONFIG_CRYPTO_STATS=y they also update the crypto statistics. That can add up to a lot of bloat at every call site. Moreover, these always involve a function call anyway, which greatly limits the benefits of inlining. So change them to be non-inline. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: x86/aesni - remove unused internal cipher algorithmEric Biggers
Since commit 944585a64f5e ("crypto: x86/aes-ni - remove special handling of AES in PCBC mode"), the "__aes-aesni" internal cipher algorithm is no longer used. So remove it too. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: doc - improve the skcipher API example codeEric Biggers
Rewrite the skcipher API example, changing it to encrypt a buffer with AES-256-XTS. This addresses various problems with the previous example: - It requests a specific driver "cbc-aes-aesni", which is unusual. Normally users ask for "cbc(aes)", not a specific driver. - It encrypts only a single AES block. For the reader, that doesn't clearly distinguish the "skcipher" API from the "cipher" API. - Showing how to encrypt something with bare CBC is arguably a poor choice of example, as it doesn't follow modern crypto trends. Now, usually authenticated encryption is recommended, in which case the user would use the AEAD API, not skcipher. Disk encryption is still a legitimate use for skcipher, but for that usually XTS is recommended. - Many other bugs and poor coding practices, such as not setting CRYPTO_TFM_REQ_MAY_SLEEP, unnecessarily allocating a heap buffer for the IV, unnecessary NULL checks, using a pointless wrapper struct, and forgetting to set an error code in one case. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: testmgr - add some more preemption pointsEric Biggers
Call cond_resched() after each fuzz test iteration. This avoids stall warnings if fuzz_iterations is set very high for testing purposes. While we're at it, also call cond_resched() after finishing testing each test vector. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: algapi - require cra_name and cra_driver_nameEric Biggers
Now that all algorithms explicitly set cra_driver_name, make it required for algorithm registration and remove the code that generated a default cra_driver_name. Also add an explicit check that cra_name is set too, since that's obviously required too, yet it didn't seem to be checked anywhere. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13crypto: make all generic algorithms set cra_driver_nameEric Biggers
Most generic crypto algorithms declare a driver name ending in "-generic". The rest don't declare a driver name and instead rely on the crypto API automagically appending "-generic" upon registration. Having multiple conventions is unnecessarily confusing and makes it harder to grep for all generic algorithms in the kernel source tree. But also, allowing NULL driver names is problematic because sometimes people fail to set it, e.g. the case fixed by commit 417980364300 ("crypto: cavium/zip - fix collision with generic cra_driver_name"). Of course, people can also incorrectly name their drivers "-generic". But that's much easier to notice / grep for. Therefore, let's make cra_driver_name mandatory. In preparation for this, this patch makes all generic algorithms set cra_driver_name. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13Merge branch 'context-id-fix' into fixesMichael Ellerman
This merges a fix for a bug in our context id handling on 64-bit hash CPUs. The fix was written against v5.1 to ease backporting to stable releases. Here we are merging it up to a v5.2-rc2 base, which involves a bit of manual resolution. It also adds a test case for the bug. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-13ALSA: dice: fix compiler warning due to returning uninitialized valueTakashi Sakamoto
This commit fixes the warning due to returning uninitialized value from start_streams() helper function. sound/firewire/dice/dice-stream.c: In function 'start_streams.isra.0': >> sound/firewire/dice/dice-stream.c:350:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] int err; ^~~ Reported-by: kbuild test robot <lkp@intel.com> Fixes: 3cd2c2d780a2 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-12Merge tag 'selinux-pr-20190612' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fixes from Paul Moore: "Three patches for v5.2. One fixes a problem where we weren't correctly logging raw SELinux labels, the other two fix problems where we weren't properly checking calls to kmemdup()" * tag 'selinux-pr-20190612' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix a missing-check bug in selinux_sb_eat_lsm_opts() selinux: fix a missing-check bug in selinux_add_mnt_opt( ) selinux: log raw contexts as untrusted strings
2019-06-13selftests/powerpc: Add test of fork with mapping above 512TBMichael Ellerman
This tests that when a process with a mapping above 512TB forks we correctly separate the parent and child address spaces. This exercises the bug in the context id handling fixed in the previous commit. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-12drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmwareAlex Deucher
Fixes SI cards running on amdgpu. Fixes: 1929059893022 ("drm/amd/amdgpu: add RLC firmware to support raven1 refresh") Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110883 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-12drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported()Dan Carpenter
The "block" variable can be set by the user through debugfs, so it can be quite large which leads to shift wrapping here. This means we report a "block" as supported when it's not, and that leads to array overflows later on. This bug is not really a security issue in real life, because debugfs is generally root only. Fixes: 36ea1bd2d084 ("drm/amdgpu: add debugfs ctrl node") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-12Merge tag 'clk-meson-5.2-1-fixes' of https://github.com/BayLibre/clk-meson ↵Stephen Boyd
into clk-fixes Pull Meson clk driver fixes from Jerome Brunet: - MPLL50M DT bindings typo fix - Meson9 VPU typo fixes * tag 'clk-meson-5.2-1-fixes' of https://github.com/BayLibre/clk-meson: clk: meson: meson8b: fix a typo in the VPU parent names array variable clk: meson: fix MPLL 50M binding id typo
2019-06-12Input: synaptics - enable SMBus on ThinkPad E480 and E580Alexander Mikhaylenko
They are capable of using intertouch and it works well with psmouse.synaptics_intertouch=1, so add them to the list. Without it, scrolling and gestures are jumpy, three-finger pinch gesture doesn't work and three- or four-finger swipes sometimes get stuck. Signed-off-by: Alexander Mikhaylenko <exalm7659@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-21 04:31:42 +0000