| Age | Commit message (Collapse) | Author |
|---|
|
The function might sleep, so it cannot be called from interrupt
context. Not even with care.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.189241552@linutronix.de
|
|
When interrupts are shutdown, they are immediately deactivated in the
irqdomain hierarchy. While this looks obviously correct there is a subtle
issue:
There might be an interrupt in flight when free_irq() is invoking the
shutdown. This is properly handled at the irq descriptor / primary handler
level, but the deactivation might completely disable resources which are
required to acknowledge the interrupt.
Split the shutdown code and deactivate the interrupt after synchronization
in free_irq(). Fixup all other usage sites where this is not an issue to
invoke the combined shutdown_and_deactivate() function instead.
This still might be an issue if the interrupt in flight servicing is
delayed on a remote CPU beyond the invocation of synchronize_irq(), but
that cannot be handled at that level and needs to be handled in the
synchronize_irq() context.
Fixes: f8264e34965a ("irqdomain: Introduce new interfaces to support hierarchy irqdomains")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.098196390@linutronix.de
|
|
The struct resource field is statically initialized
and may never change. Therefore make it const.
Signed-off-by: Enrico Weigelt <info@metux.net>
Link: https://lore.kernel.org/r/1560787211-15443-1-git-send-email-info@metux.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix minimum encryption key size check so that HCI_MIN_ENC_KEY_SIZE is
also allowed as stated in the comment.
This bug caused connection problems with devices having maximum
encryption key size of 7 octets (56-bit).
Fixes: 693cd8ce3f88 ("Bluetooth: Fix regression with minimum encryption key size alignment")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203997
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
devm_ioremap_resource() does not currently take 'const' arguments,
which results in a warning from the first driver trying to do it
anyway:
drivers/gpio/gpio-amd-fch.c: In function 'amd_fch_gpio_probe':
drivers/gpio/gpio-amd-fch.c:171:49: error: passing argument 2 of 'devm_ioremap_resource' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores);
^~~~~~~~~~~~~~~~~~~
Change the prototype to allow it, as there is no real reason not to.
Fixes: 9bb2e0452508 ("gpio: amd: Make resource struct const")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190628150049.1108048-1-arnd@arndb.de
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviwed-By: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Pull cifs fix from Steve French:
"SMB3 fix (for stable as well) for crash mishandling one of the Windows
reparse point symlink tags"
* tag '5.2-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix crash querying symlinks stored as reparse-points
|
|
The old commit 6e4b74e4690d ("usb: renesas: fix scheduling in atomic
context bug") fixed an atomic issue by using workqueue for the shdmac
dmaengine driver. However, this has a potential race condition issue
between the work pending and usbhsg_ep_free_request() in gadget mode.
When usbhsg_ep_free_request() is called while pending the queue,
since the work_struct will be freed and then the work handler is
called, kernel panic happens on process_one_work().
To fix the issue, if we could call cancel_work_sync() at somewhere
before the free request, it could be easy. However,
the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver
calls free request via gether_disconnect()).
For now, almost all users are having "USB-DMAC" and the DMAengine
driver can be used on atomic. So, this patch adds a workaround for
a race condition to call the DMAengine APIs without the workqueue.
This means we still have TODO on shdmac environment (SH7724), but
since it doesn't have SMP, the race condition might not happen.
Fixes: ab330cf3888d ("usb: renesas_usbhs: add support for USB-DMAC")
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Variable ret is being initialized with a value that is never read and
ret is being re-assigned immediately after the initialization in both
paths of an if statement. This is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fork() fix from Christian Brauner:
"A single small fix for copy_process() in kernel/fork.c:
With Al's removal of ksys_close() from cleanup paths in copy_process()
a bug was introduced. When anon_inode_getfile() failed the cleanup was
correctly performed but the error code was not propagated to callers
of copy_process() causing them to operate on a nonsensical pointer.
The fix is a simple on-liner which makes sure that a proper negative
error code is returned from copy_process().
syzkaller has also verified that the bug is not reproducible with this
fix"
* tag 'for-linus-20190701' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fork: return proper negative error code
|
|
Use a 10000us AHB idle timeout in dwc2_core_reset() and make it
consistent with the other "wait for AHB master IDLE state" ocurrences.
This fixes a problem for me where dwc2 would not want to initialize when
updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with
4.14.
Testing on my board shows that it takes 180us until AHB master IDLE
state is signalled. The very old vendor driver for this SoC (ifxhcd)
used a 1 second timeout.
Use the same timeout that is used everywhere when polling for
GRSTCTL_AHBIDLE instead of using a timeout that "works for one board"
(180us in my case) to have consistent behavior across the dwc2 driver.
Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
fix below issue reported by coccicheck
drivers/usb/gadget/function/f_eem.c:169:7-12: Unneeded variable:
"value". Return "- EOPNOTSUPP" on line 179
We can not change return type of eem_setup as its registered with callback
function
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Fix a build failure with the LLVM linker and a module allocation
failure when KASLR is active:
- Fix module allocation when running with KASLR enabled
- Fix broken build due to bug in LLVM linker (ld.lld)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/efi: Mark __efistub_stext_offset as an absolute symbol explicitly
arm64: kaslr: keep modules inside module region when KASAN is enabled
|
|
At imx7ulp, the USB related analog register is located in PHY register
region too, so we need to control PLL at PHY driver directly.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Add compatible for 7ulp USB PHY.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
The FSA9480 has a new driver more appropriately located
in the drivers/extcon subsystem. It is also more complete
and includes device tree support. Delete the old misc
driver.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Pawe Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://lore.kernel.org/r/20190630140302.16245-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Controller for OUT endpoints has shared on-chip buffers for all incoming
packets, including ep0out. It's FIFO buffer, so packets must be handled
by DMA in correct order. If the first packet in the buffer will not be
handled, then the following packets directed for other endpoints and
functions will be blocked.
Additionally the packets directed to one endpoint can block entire on-chip
buffers. In this case transfer to other endpoints also will blocked.
To resolve this issue after raising the descriptor missing interrupt
driver prepares internal usb_request object and use it to arm DMA
transfer.
The problematic situation was observed in case when endpoint has
been enabled but no usb_request were queued. Driver try detects
such endpoints and will use this workaround only for these endpoint.
Driver use limited number of buffer. This number can be set by macro
CDNS_WA2_NUM_BUFFERS.
Such blocking situation was observed on ACM gadget. For this function
host send OUT data packet but ACM function is not prepared for
this packet. It's cause that buffer placed in on chip memory block
transfer to other endpoints.
Issue has been fixed for DEV_VER_V2 version of controller.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch introduce new Cadence USBSS DRD driver to Linux kernel.
The Cadence USBSS DRD Controller is a highly configurable IP Core which
can be instantiated as Dual-Role Device (DRD), Peripheral Only and
Host Only (XHCI)configurations.
The current driver has been validated with FPGA platform. We have
support for PCIe bus, which is used on FPGA prototyping.
The host side of USBSS-DRD controller is compliant with XHCI
specification, so it works with standard XHCI Linux driver.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Patch moves switch responsible for decoding descriptor type
outside snprintf. It improves code readability a little.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Patch adds usb_decode_test_mode and usb_decode_device_feature functions,
which allow to make more readable and simplify the
usb_decode_set_clear_feature function.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Patch moves some decoding functions from driver/usb/dwc3/debug.h driver
to driver/usb/gadget/debug.c file. These moved functions include:
dwc3_decode_get_status
dwc3_decode_set_clear_feature
dwc3_decode_set_address
dwc3_decode_get_set_descriptor
dwc3_decode_get_configuration
dwc3_decode_set_configuration
dwc3_decode_get_intf
dwc3_decode_set_intf
dwc3_decode_synch_frame
dwc3_decode_set_sel
dwc3_decode_set_isoch_delay
dwc3_decode_ctrl
These functions are used also in inroduced cdns3 driver.
All functions prefixes were changed from dwc3 to usb.
Also, function's parameters has been extended according to the name
of fields in standard SETUP packet.
Additionally, patch adds usb_decode_ctrl function to
include/linux/usb/gadget.h file.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch aim at documenting USB related dt-bindings for the
Cadence USBSS-DRD controller.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch adds the necessary PCI ID for TGP-LP devices.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next
Joel writes:
FSI changes for 5.3
- Add MAINTAINERS entry. There is now a git tree and a mailing
list/patchwork for collecting FSI patches
- Bug fix for error driver registration error paths
- Correction for the OCC hwmon driver to meet the spec
* tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi:
fsi/core: Fix error paths on CFAM init
OCC: FSI and hwmon: Add sequence numbering
MAINTAINERS: Add FSI subsystem
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.3-rc1
Here are the USB-serial updates for 5.3-rc1; just some new device ids
this time.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'usb-serial-5.3-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: ftdi_sio: add ID for isodebug v1
USB: serial: option: add support for GosunCn ME3630 RNDIS mode
|
|
!current->mm is not a reliable indicator for kernel threads as they might
temporarily use a user mm. Check for PF_KTHREAD instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907021750100.1802@nanos.tec.linutronix.de
|
|
This function was overlooked when the write_begin and write_end address space
operations were removed as part of gfs2's iomap conversion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Without casting page->index to a guaranteed 64-bit type, the value might be
treated as 32-bit on 32-bit platforms and thus get truncated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The 'perf kvm' command set up things so that we can record, report, top,
etc, but not 'script', so make 'perf script' be able to process samples
by allowing to pass guest kallsyms, vmlinux, modules, etc, and if at
least one of those is provided, set perf_guest to true so that guest
samples get properly resolved.
Testing it:
# perf kvm --guest --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules record -e cycles:Gk
^C[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 3.602 MB perf.data.guest (10492 samples) ]
#
# perf evlist -i perf.data.guest
cycles:Gk
# perf evlist -v -i perf.data.guest
cycles:Gk: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_user: 1, exclude_hv: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_host: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
# perf kvm --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules report --stdio -s sym | head -30
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 10K of event 'cycles:Gk'
# Event count (approx.): 2434201408
#
# Overhead Symbol
# ........ ..............................................
#
11.93% [g] avtab_search_node
3.95% [g] sidtab_context_to_sid
2.41% [g] n_tty_write
2.20% [g] _spin_unlock_irqrestore
1.37% [g] _aesni_dec4
1.33% [g] kmem_cache_alloc
1.07% [g] native_write_cr0
0.99% [g] kfree
0.95% [g] _spin_lock
0.91% [g] __memset
0.87% [g] schedule
0.83% [g] _spin_lock_irqsave
0.76% [g] __kmalloc
0.67% [g] avc_has_perm_noaudit
0.66% [g] kmem_cache_free
0.65% [g] glue_xts_crypt_128bit
0.59% [g] __d_lookup
0.59% [g] __audit_syscall_exit
0.56% [g] __memcpy
#
Then, when trying to use perf script to generate a python script and
then process the events after adding a python hook for non-tracepoint
events:
# perf script -i perf.data.guest -g python
generated Python script: perf-script.py
# vim perf-script.py
# tail -2 perf-script.py
def process_event(param_dict):
print(param_dict["symbol"])
#
# perf script -i perf.data.guest -s perf-script.py | head
in trace_begin
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
231
#
We'd see just the vmx_vmexit, i.e. the samples from the guest don't show
up.
After this patch:
# perf script --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules -i perf.data.guest -s perf-script.py 2> /dev/null | head -30
in trace_begin
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
save_args
do_timer
drain_array
inode_permission
avc_has_perm_noaudit
run_timer_softirq
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
kvm_guest_apic_eoi_write
run_posix_cpu_timers
_spin_lock
handle_pte_fault
rcu_irq_enter
delay_tsc
delay_tsc
native_read_tsc
apic_timer_interrupt
sys_open
internal_add_timer
list_del
rcu_exit_nohz
#
Jiri Olsa noticed we need to set 'perf_guest' to true if we want to
process guest samples and I made it be set if one of the guest files
settings get set via the command line options added in this patch, that
match those present in the 'perf kvm' command.
We probably want to have 'perf record', 'perf report' etc to notice that
there are guest samples and do the right thing, which is to look for
files with some suffix that make it be associated with the guest used to
collect the samples, i.e. if a vmlinux file is passed, we can get the
build-id from it, if not some other identifier or simply looking for
"kallsyms.guest", for instance, in the current directory.
Reported-by: Mariano Pache <npache@redhat.com>
Tested-by: Mariano Pache <npache@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Ali Raza <alirazabhutta.10@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Orran Krieger <okrieger@redhat.com>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: https://lkml.kernel.org/n/tip-d54gj64rerlxcqsrod05biwn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the blk_mq_bio_to_request() call in front of the if-statement.
Cc: Hannes Reinecke <hare@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No code that occurs between blk_mq_get_ctx() and blk_mq_put_ctx() depends
on preemption being disabled for its correctness. Since removing the CPU
preemption calls does not measurably affect performance, simplify the
blk-mq code by removing the blk_mq_put_ctx() function and also by not
disabling preemption in blk_mq_get_ctx().
Cc: Hannes Reinecke <hare@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Change d1dcd67825 re-worked the struct fsi_slave initialisation in
fsi_slave_init, but introduced a few inconsitencies: the slave->dev is
now registered through cdev_device_add, but we may kfree() the device
out from underneath the cdev registration. We may also leave an IDA
allocated.
This change fixes the error paths, so that we kfree() only before the
device is registered with the core code. We also move the smode write to
before we start creating proper devices, as it's the most likely to
fail. We also remove the IDA-allocated minor on error, and properly
clean up the of_node.
Fixes: d1dcd6782576 ("fsi: Add cfam char devices")
Reported-by: Lei YU <mine260309@gmail.com>
Tested-by: John Wang <wangzqbj@inspur.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Sequence numbering of the commands submitted to the OCC is required by
the OCC interface specification. Add sequence numbering and check for
the correct sequence number on the response.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The subsystem was merged some time ago but we did not have a maintainers
entry. The mailing list exists to allow our patchwork to slurp up the
patches. The tree will be co-maintained by myself and Jeremy.
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The psock_tpacket test will need to access /proc/kallsyms, this would
require the kernel config CONFIG_KALLSYMS to be enabled first.
Apart from adding CONFIG_KALLSYMS to the net/config file here, check the
file existence to determine if we can run this test will be helpful to
avoid a false-positive test result when testing it directly with the
following commad against a kernel that have CONFIG_KALLSYMS disabled:
make -C tools/testing/selftests TARGETS=net run_tests
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch allows fallocate to allocate physical blocks for pinned file.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The discard thread should issue upto dpolicy->max_requests at once
and wait for all those discard requests at once it reaches
dpolicy->max_requests. It should then sleep for dpolicy->min_interval
timeout before issuing the next batch of discard requests. But in the
current code of is_idle(), it checks for dcc_info->queued_discard and
aborts issuing the discard batch of max_requests. This
dcc_info->queued_discard will be true always once one discard command
is issued.
It is thus resulting into this type of discard request pattern -
- Issue discard request#1
- is_idle() returns false, discard thread waits for request#1 and then
sleeps for min_interval 50ms.
- Issue discard request#2
- is_idle() returns false, discard thread waits for request#2 and then
sleeps for min_interval 50ms.
- and so on for all other discard requests, assuming f2fs is idle w.r.t
other conditions.
With this fix, the pattern will look like this -
- Issue discard request#1
- Issue discard request#2
and so on upto max_requests of 8
- Issue discard request#8
- wait for min_interval 50ms.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Two paths to update quota and f2fs_lock_op:
1.
- lock_op
| - quota_update
`- unlock_op
2.
- quota_update
- lock_op
`- unlock_op
But, we need to make a transaction on quota_update + lock_op in #2 case.
So, this patch introduces:
1. lock_op
2. down_write
3. check __need_flush
4. up_write
5. if there is dirty quota entries, flush them
6. otherwise, good to go
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If xattr is corrupted, let's print kernel message and set SBI_NEED_FSCK
for further repair.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
f2fs uses EFAULT as error number to indicate filesystem is corrupted
all the time, but generic filesystems use EUCLEAN for such condition,
we need to change to follow others.
This patch adds two new macros as below to wrap more generic error
code macros, and spread them in code.
EFSBADCRC EBADMSG /* Bad CRC detected */
EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Replace the open-coded divisions with round-up by calls to the
DIV_ROUND_UP() helper macro.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Pavel reported, once we detect filesystem inconsistency in
f2fs_inplace_write_data(), it will be better to print kernel message as
we did in other places.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
- Add and use f2fs_<level> macros
- Convert f2fs_msg to f2fs_printk
- Remove level from f2fs_printk and embed the level in the format
- Coalesce formats and align multi-line arguments
- Remove unnecessary duplicate extern f2fs_msg f2fs.h
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
No logic change.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This ioctl shrinks a given length (aligned to sections) from end of the
main area. Any cursegs and valid blocks will be moved out before
invalidating the range.
This feature can be used for adjusting partition sizes online.
History of the patch:
Sahitya Tummala:
- Add this ioctl for f2fs_compat_ioctl() as well.
- Fix debugfs status to reflect the online resize changes.
- Fix potential race between online resize path and allocate new data
block path or gc path.
Others:
- Rename some identifiers.
- Add some error handling branches.
- Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range.
- Implement this interface as ext4's, and change the parameter from shrunk
bytes to new block count of F2FS.
- During resizing, force to empty sit_journal and forbid adding new
entries to it, in order to avoid invalid segno in journal after resize.
- Reduce sbi->user_block_count before resize starts.
- Commit the updated superblock first, and then update in-memory metadata
only when the former succeeds.
- Target block count must align to sections.
- Write checkpoint before and after committing the new superblock, w/o
CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if
resize fails after the new superblock is committed.
- In free_segment_range(), reduce granularity of gc_mutex.
- Add protection on curseg migration.
- Add freeze_bdev() and thaw_bdev() for resize fs.
- Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation.
- Recover super_block and FS metadata when resize fails.
- No need to clear CP_FSCK_FLAG in update_ckpt_flags().
- Clean up the sb and fs metadata update functions for resize_fs.
Geert Uytterhoeven:
- Use div_u64*() for 64-bit divisions
Arnd Bergmann:
- Not all architectures support get_user() with a 64-bit argument:
ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined!
Use copy_from_user() here, this will always work.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Before mlxsw_sp1_ptp_packet_finish() sends the packet back, it validates
whether the corresponding port is still valid. However the condition is
incorrect: when mlxsw_sp_port == NULL, the code dereferences the port to
compare it to skb->dev.
The condition needs to check whether the port is present and skb->dev still
refers to that port (or else is NULL). If that does not hold, bail out.
Add a pair of parentheses to fix the condition.
Fixes: d92e4e6e33c8 ("mlxsw: spectrum: PTP: Support timestamping on Spectrum-1")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the rxrpc_eproto tracepoint is enabled, an oops will be cause by the
trace line that rxrpc_extract_header() tries to emit when a protocol error
occurs (typically because the packet is short) because the call argument is
NULL.
Fix this by using ?: to assume 0 as the debug_id if call is NULL.
This can then be induced by:
echo -e '\0\0\0\0\0\0\0\0' | ncat -4u --send-only <addr> 20001
where addr has the following program running on it:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <linux/rxrpc.h>
int main(void)
{
struct sockaddr_rxrpc srx;
int fd;
memset(&srx, 0, sizeof(srx));
srx.srx_family = AF_RXRPC;
srx.srx_service = 0;
srx.transport_type = AF_INET;
srx.transport_len = sizeof(srx.transport.sin);
srx.transport.sin.sin_family = AF_INET;
srx.transport.sin.sin_port = htons(0x4e21);
fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET6);
bind(fd, (struct sockaddr *)&srx, sizeof(srx));
sleep(20);
return 0;
}
It results in the following oops.
BUG: kernel NULL pointer dereference, address: 0000000000000340
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:trace_event_raw_event_rxrpc_rx_eproto+0x47/0xac
...
Call Trace:
<IRQ>
rxrpc_extract_header+0x86/0x171
? rcu_read_lock_sched_held+0x5d/0x63
? rxrpc_new_skb+0xd4/0x109
rxrpc_input_packet+0xef/0x14fc
? rxrpc_input_data+0x986/0x986
udp_queue_rcv_one_skb+0xbf/0x3d0
udp_unicast_rcv_skb.isra.8+0x64/0x71
ip_protocol_deliver_rcu+0xe4/0x1b4
ip_local_deliver+0xf0/0x154
__netif_receive_skb_one_core+0x50/0x6c
netif_receive_skb_internal+0x26b/0x2e9
napi_gro_receive+0xf8/0x1da
rtl8169_poll+0x303/0x4c4
net_rx_action+0x10e/0x333
__do_softirq+0x1a5/0x38f
irq_exit+0x54/0xc4
do_IRQ+0xda/0xf8
common_interrupt+0xf/0xf
</IRQ>
...
? cpuidle_enter_state+0x23c/0x34d
cpuidle_enter+0x2a/0x36
do_idle+0x163/0x1ea
cpu_startup_entry+0x1d/0x1f
start_secondary+0x157/0x172
secondary_startup_64+0xa4/0xb0
Fixes: a25e21f0bcd2 ("rxrpc, afs: Use debug_ids rather than pointers in traces")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was reported that the GPD MicroPC is broken in a way that no valid
MAC address can be read from the network chip. The vendor driver deals
with this by assigning a random MAC address as fallback. So let's do
the same.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 759d095741721888b6ee51afa74e0a66ce65e974.
The patch was based on a misunderstanding. As Al Viro pointed out [0]
it's simply wrong on big endian. So let's revert it.
[0] https://marc.info/?t=156200975600004&r=1&w=2
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is for fixing bug KMSAN: uninit-value in ax88772_bind
Tested by
https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ
Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com
syzbot found the following crash on:
HEAD commit: f75e4cfe kmsan: use kmsan_handle_urb() in urb.c
git tree: kmsan
console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000
kernel config:
https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a
dashboard link:
https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e
compiler: clang version 9.0.0 (/home/glider/llvm/clang
06d00afa61eef8f7f501ebdb4e8612ea43ec2d78)
syz repro:
https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000
==================================================================
BUG: KMSAN: uninit-value in is_valid_ether_addr
include/linux/etherdevice.h:200 [inline]
BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr
drivers/net/usb/asix_devices.c:73 [inline]
BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0
drivers/net/usb/asix_devices.c:724
CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x191/0x1f0 lib/dump_stack.c:113
kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
__msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
is_valid_ether_addr include/linux/etherdevice.h:200 [inline]
asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline]
ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724
usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728
usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361
really_probe+0xdae/0x1d80 drivers/base/dd.c:513
driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
__device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
__device_attach+0x454/0x730 drivers/base/dd.c:844
device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
bus_probe_device+0x137/0x390 drivers/base/bus.c:514
device_add+0x288d/0x30e0 drivers/base/core.c:2106
usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027
generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210
usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266
really_probe+0xdae/0x1d80 drivers/base/dd.c:513
driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
__device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
__device_attach+0x454/0x730 drivers/base/dd.c:844
device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
bus_probe_device+0x137/0x390 drivers/base/bus.c:514
device_add+0x288d/0x30e0 drivers/base/core.c:2106
usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534
hub_port_connect drivers/usb/core/hub.c:5089 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432
process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269
process_scheduled_works kernel/workqueue.c:2331 [inline]
worker_thread+0x189c/0x2460 kernel/workqueue.c:2417
kthread+0x4b5/0x4f0 kernel/kthread.c:254
ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 760f1dc2958022 ("net: stmmac: add sanity check to
device_property_read_u32_array call") introduced error checking of the
device_property_read_u32_array() call in stmmac_mdio_reset().
This results in the following error when the "snps,reset-delays-us"
property is not defined in devicetree:
invalid property snps,reset-delays-us
This sanity check made sense until commit 84ce4d0f9f55b4 ("net: stmmac:
initialize the reset delay array") ensured that there are fallback
values for the reset delay if the "snps,reset-delays-us" property is
absent. That was at the cost of making that property mandatory though.
Drop the sanity check for device_property_read_u32_array() and thus make
the "snps,reset-delays-us" property optional again (avoiding the error
message while loading the stmmac driver with a .dtb where the property
is absent).
Fixes: 760f1dc2958022 ("net: stmmac: add sanity check to device_property_read_u32_array call")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
