| Age | Commit message (Collapse) | Author |
|---|
|
When executing 'echo mem > /sys/power/state', the following
deadlock occurs. Since there is output during the serial
port entering the suspend process, the suspend will be
interrupted, resulting in the nesting of locks. Therefore,
use uart_port_lock_irq() instead of uart_port_unlock().
WARNING: inconsistent lock state
6.12.0-rc2-00002-g3c199ed5bd64-dirty #23 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
sh/494 [HC0[0]:SC0[0]:HE1:SE1] takes:
c4db5850 (&port_lock_key){?.-.}-{3:3}, at: imx_uart_enable_wakeup+0x14/0x254
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x104/0x348
_raw_spin_lock+0x48/0x84
imx_uart_int+0x14/0x4dc
__handle_irq_event_percpu+0xac/0x2fc
handle_irq_event_percpu+0xc/0x40
handle_irq_event+0x38/0x8c
handle_fasteoi_irq+0xb4/0x1b8
handle_irq_desc+0x1c/0x2c
gic_handle_irq+0x6c/0xa0
generic_handle_arch_irq+0x2c/0x64
call_with_stack+0x18/0x20
__irq_svc+0x9c/0xbc
_raw_spin_unlock_irqrestore+0x2c/0x48
uart_write+0xd8/0x3a0
do_output_char+0x1a8/0x1e4
n_tty_write+0x224/0x440
file_tty_write.constprop.0+0x124/0x250
do_iter_readv_writev+0x100/0x1e0
vfs_writev+0xc4/0x448
do_writev+0x68/0xf8
ret_fast_syscall+0x0/0x1c
irq event stamp: 31593
hardirqs last enabled at (31593): [<c1150e48>] _raw_spin_unlock_irqrestore+0x44/0x48
hardirqs last disabled at (31592): [<c07f32f0>] clk_enable_lock+0x60/0x120
softirqs last enabled at (30334): [<c012d1d4>] handle_softirqs+0x2cc/0x478
softirqs last disabled at (30325): [<c012d510>] __irq_exit_rcu+0x120/0x15c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&port_lock_key);
<Interrupt>
lock(&port_lock_key);
Fixes: 3c199ed5bd64 ("serial: imx: Grab port lock in imx_uart_enable_wakeup()")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20241210233613.2881264-1-xiaolei.wang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit f9b11229b79c ("serial: 8250: Fix PM usage_count for console
handover") fixed one runtime PM usage counter balance problem that
occurs because .dev is not set during univ8250 setup preventing call to
pm_runtime_get_sync(). Later, univ8250_console_exit() will trigger the
runtime PM usage counter underflow as .dev is already set at that time.
Call pm_runtime_get_sync() to balance the RPM usage counter also in
serial8250_register_8250_port() before trying to add the port.
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Fixes: bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console")
Cc: stable <stable@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241210170120.2231-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit addresses an issue related to below kernel panic where
panic_on_warn is enabled. It is caused by the unnecessary use of WARN_ON
in functionsfs_bind, which easily leads to the following scenarios.
1.adb_write in adbd 2. UDC write via configfs
================= =====================
->usb_ffs_open_thread() ->UDC write
->open_functionfs() ->configfs_write_iter()
->adb_open() ->gadget_dev_desc_UDC_store()
->adb_write() ->usb_gadget_register_driver_owner
->driver_register()
->StartMonitor() ->bus_add_driver()
->adb_read() ->gadget_bind_driver()
<times-out without BIND event> ->configfs_composite_bind()
->usb_add_function()
->open_functionfs() ->ffs_func_bind()
->adb_open() ->functionfs_bind()
<ffs->state !=FFS_ACTIVE>
The adb_open, adb_read, and adb_write operations are invoked from the
daemon, but trying to bind the function is a process that is invoked by
UDC write through configfs, which opens up the possibility of a race
condition between the two paths. In this race scenario, the kernel panic
occurs due to the WARN_ON from functionfs_bind when panic_on_warn is
enabled. This commit fixes the kernel panic by removing the unnecessary
WARN_ON.
Kernel panic - not syncing: kernel: panic_on_warn set ...
[ 14.542395] Call trace:
[ 14.542464] ffs_func_bind+0x1c8/0x14a8
[ 14.542468] usb_add_function+0xcc/0x1f0
[ 14.542473] configfs_composite_bind+0x468/0x588
[ 14.542478] gadget_bind_driver+0x108/0x27c
[ 14.542483] really_probe+0x190/0x374
[ 14.542488] __driver_probe_device+0xa0/0x12c
[ 14.542492] driver_probe_device+0x3c/0x220
[ 14.542498] __driver_attach+0x11c/0x1fc
[ 14.542502] bus_for_each_dev+0x104/0x160
[ 14.542506] driver_attach+0x24/0x34
[ 14.542510] bus_add_driver+0x154/0x270
[ 14.542514] driver_register+0x68/0x104
[ 14.542518] usb_gadget_register_driver_owner+0x48/0xf4
[ 14.542523] gadget_dev_desc_UDC_store+0xf8/0x144
[ 14.542526] configfs_write_iter+0xf0/0x138
Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Akash M <akash.m5@samsung.com>
Link: https://lore.kernel.org/r/20241219125221.1679-1-akash.m5@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There's USB error when tegra board is shutting down:
[ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113
[ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113
[ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113
[ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead
[ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up
[ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3
LPM, port won't transit to U1/U2 when it's already suspended in U3,
hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang <waynec@nvidia.com>
Cc: stable <stable@kernel.org>
Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown")
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20241206074817.89189-1-kaihengf@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When device_add(&udev->dev) succeeds and a later call fails,
usb_new_device() does not properly call device_del(). As comment of
device_add() says, 'if device_add() succeeds, you should call
device_del() when you want to get rid of it. If device_add() has not
succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 9f8b17e643fe ("USB: make usbdevices export their device nodes instead of using a separate class")
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241218071346.2973980-1-make_ruc2021@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The tcpci_irq() may meet below NULL pointer dereference issue:
[ 2.641851] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
[ 2.641951] status 0x1, 0x37f
[ 2.650659] Mem abort info:
[ 2.656490] ESR = 0x0000000096000004
[ 2.660230] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.665532] SET = 0, FnV = 0
[ 2.668579] EA = 0, S1PTW = 0
[ 2.671715] FSC = 0x04: level 0 translation fault
[ 2.676584] Data abort info:
[ 2.679459] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 2.684936] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 2.689980] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 2.695284] [0000000000000010] user address but active_mm is swapper
[ 2.701632] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 2.707883] Modules linked in:
[ 2.710936] CPU: 1 UID: 0 PID: 87 Comm: irq/111-2-0051 Not tainted 6.12.0-rc6-06316-g7f63786ad3d1-dirty #4
[ 2.720570] Hardware name: NXP i.MX93 11X11 EVK board (DT)
[ 2.726040] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.732989] pc : tcpci_irq+0x38/0x318
[ 2.736647] lr : _tcpci_irq+0x14/0x20
[ 2.740295] sp : ffff80008324bd30
[ 2.743597] x29: ffff80008324bd70 x28: ffff800080107894 x27: ffff800082198f70
[ 2.750721] x26: ffff0000050e6680 x25: ffff000004d172ac x24: ffff0000050f0000
[ 2.757845] x23: ffff000004d17200 x22: 0000000000000001 x21: ffff0000050f0000
[ 2.764969] x20: ffff000004d17200 x19: 0000000000000000 x18: 0000000000000001
[ 2.772093] x17: 0000000000000000 x16: ffff80008183d8a0 x15: ffff00007fbab040
[ 2.779217] x14: ffff00007fb918c0 x13: 0000000000000000 x12: 000000000000017a
[ 2.786341] x11: 0000000000000001 x10: 0000000000000a90 x9 : ffff80008324bd00
[ 2.793465] x8 : ffff0000050f0af0 x7 : ffff00007fbaa840 x6 : 0000000000000031
[ 2.800589] x5 : 000000000000017a x4 : 0000000000000002 x3 : 0000000000000002
[ 2.807713] x2 : ffff80008324bd3a x1 : 0000000000000010 x0 : 0000000000000000
[ 2.814838] Call trace:
[ 2.817273] tcpci_irq+0x38/0x318
[ 2.820583] _tcpci_irq+0x14/0x20
[ 2.823885] irq_thread_fn+0x2c/0xa8
[ 2.827456] irq_thread+0x16c/0x2f4
[ 2.830940] kthread+0x110/0x114
[ 2.834164] ret_from_fork+0x10/0x20
[ 2.837738] Code: f9426420 f9001fe0 d2800000 52800201 (f9400a60)
This may happen on shared irq case. Such as two Type-C ports share one
irq. After the first port finished tcpci_register_port(), it may trigger
interrupt. However, if the interrupt comes by chance the 2nd port finishes
devm_request_threaded_irq(), the 2nd port interrupt handler will run at
first. Then the above issue happens due to tcpci is still a NULL pointer
in tcpci_irq() when dereference to regmap.
devm_request_threaded_irq()
<-- port1 irq comes
disable_irq(client->irq);
tcpci_register_port()
This will restore the logic to the state before commit (77e85107a771 "usb:
typec: tcpci: support edge irq").
However, moving tcpci_register_port() earlier creates a problem when use
edge irq because tcpci_init() will be called before
devm_request_threaded_irq(). The tcpci_init() writes the ALERT_MASK to
the hardware to tell it to start generating interrupts but we're not ready
to deal with them yet, then the ALERT events may be missed and ALERT line
will not recover to high level forever. To avoid the issue, this will also
set ALERT_MASK register after devm_request_threaded_irq() return.
Fixes: 77e85107a771 ("usb: typec: tcpci: support edge irq")
Cc: stable <stable@kernel.org>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20241218095328.2604607-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
crash caused by port being null
Considering that in some extreme cases, when performing the
unbinding operation, gserial_disconnect has cleared gser->ioport,
which triggers gadget reconfiguration, and then calls gs_read_complete,
resulting in access to a null pointer. Therefore, ep is disabled before
gserial_disconnect sets port to null to prevent this from happening.
Call trace:
gs_read_complete+0x58/0x240
usb_gadget_giveback_request+0x40/0x160
dwc3_remove_requests+0x170/0x484
dwc3_ep0_out_start+0xb0/0x1d4
__dwc3_gadget_start+0x25c/0x720
kretprobe_trampoline.cfi_jt+0x0/0x8
kretprobe_trampoline.cfi_jt+0x0/0x8
udc_bind_to_driver+0x1d8/0x300
usb_gadget_probe_driver+0xa8/0x1dc
gadget_dev_desc_UDC_store+0x13c/0x188
configfs_write_iter+0x160/0x1f4
vfs_write+0x2d0/0x40c
ksys_write+0x7c/0xf0
__arm64_sys_write+0x20/0x30
invoke_syscall+0x60/0x150
el0_svc_common+0x8c/0xf8
do_el0_svc+0x28/0xa0
el0_svc+0x24/0x84
Fixes: c1dca562be8a ("usb gadget: split out serial core")
Cc: stable <stable@kernel.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://lore.kernel.org/r/TYUPR06MB621733B5AC690DBDF80A0DCCD2042@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current implementation of stmmac_probe_config_dt() does not release the
OF node reference obtained by of_parse_phandle() in some error paths.
The problem is that some error paths call stmmac_remove_config_dt() to
clean up but others use and unwind ladder. These two types of error
handling have not kept in sync and have been a recurring source of bugs.
Re-write the error handling in stmmac_probe_config_dt() to use an unwind
ladder. Consequently, stmmac_remove_config_dt() is not needed anymore,
thus remove it.
This bug was found by an experimental verification tool that I am
developing.
Fixes: 4838a5405028 ("net: stmmac: Fix wrapper drivers not detecting PHY")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241219024119.2017012-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
the error path of .probe()
Current implementation of ci_hdrc_imx_driver does not decrement the
refcount of the device obtained in usbmisc_get_init_data(). Add a
put_device() call in .remove() and in .probe() before returning an
error.
This bug was found by an experimental static analysis tool that I am
developing.
Cc: stable <stable@kernel.org>
Fixes: f40017e0f332 ("chipidea: usbmisc_imx: Add USB support for VF610 SoCs")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20241216015539.352579-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current implementation of the ucsi glink client connector_status()
callback is only relying on the state of the gpio. This means that even
when the cable is unplugged, the orientation propagated to the switches
along the graph is "orientation normal", instead of "orientation none",
which would be the correct one in this case.
One of the Qualcomm DP-USB PHY combo drivers, which needs to be aware of
the orientation change, is relying on the "orientation none" to skip
the reinitialization of the entire PHY. Since the ucsi glink client
advertises "orientation normal" even when the cable is unplugged, the
mentioned PHY is taken down and reinitialized when in fact it should be
left as-is. This triggers a crash within the displayport controller driver
in turn, which brings the whole system down on some Qualcomm platforms.
Propagating "orientation none" from the ucsi glink client on the
connector_status() callback hides the problem of the mentioned PHY driver
away for now. But the "orientation none" is nonetheless the correct one
to be used in this case.
So propagate the "orientation none" instead when the connector status
flags says cable is disconnected.
Fixes: 76716fd5bf09 ("usb: typec: ucsi: glink: move GPIO reading into connector_status callback")
Cc: stable <stable@kernel.org> # 6.10
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241212-usb-typec-ucsi-glink-add-orientation-none-v2-1-db5a50498a77@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit c033563220e0f7a8
("usb: gadget: configfs: Attach arbitrary strings to cdev")
a user can provide extra string descriptors to a USB gadget via configfs.
For "manufacturer", "product", "serialnumber", setting the string via
configfs ignores a trailing LF.
For the arbitrary strings the LF was not ignored.
This patch ignores a trailing LF to make this consistent with the existing
behavior for "manufacturer", ... string descriptors.
Fixes: c033563220e0 ("usb: gadget: configfs: Attach arbitrary strings to cdev")
Cc: stable <stable@kernel.org>
Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Link: https://lore.kernel.org/r/20241212154114.29295-1-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the regression introduced by commit d8c6edfa3f4e ("USB:
usblp: don't call usb_set_interface if there's a single alt"),
which causes that unsupported protocols can also be set via
ioctl when the num_altsetting of the device is 1.
Move the check for protocol support to the earlier stage.
Fixes: d8c6edfa3f4e ("USB: usblp: don't call usb_set_interface if there's a single alt")
Cc: stable <stable@kernel.org>
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://lore.kernel.org/r/20241212143852.671889-1-jerrysteve1101@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently afunc_bind sets std_ac_if_desc.bNumEndpoints to 1 if
controls (mute/volume) are enabled. During next afunc_bind call,
bNumEndpoints would be unchanged and incorrectly set to 1 even
if the controls aren't enabled.
Fix this by resetting the value of bNumEndpoints to 0 on every
afunc_bind call.
Fixes: eaf6cbe09920 ("usb: gadget: f_uac2: add volume and mute support")
Cc: stable <stable@kernel.org>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20241211115915.159864-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The CSR dump support leverages the FBNIC_BOUNDS macro, which pads the end
condition for each section by adding an offset of 1. However, the RPC RAM
section, which is dumped differently from other sections, does not rely
on this macro and instead directly uses end boundary address. Hence,
subtracting 1 from the end address results in skipping a register.
Fixes 3d12862b216d (“eth: fbnic: Add support to dump registers”)
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20241218232614.439329-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
max_contaminant_read_resistance_kohm()
If max_contaminant_read_adc_mv() fails, then return the error code. Don't
return zero.
Fixes: 02b332a06397 ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/f1bf3768-419e-40dd-989c-f7f455d6c824@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
XHCI_SKIP_PHY_INIT property
The source of quirk XHCI_SKIP_PHY_INIT comes from xhci_plat_priv.quirks or
software node property. This will set skip_phy_initialization if software
node also has XHCI_SKIP_PHY_INIT property.
Fixes: a6cd2b3fa894 ("usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20241209111423.4085548-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Runtime PM documentation (Section 5) mentions, during remove()
callbacks, drivers should undo the runtime PM changes done in
probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc. Hence add missing
function to disable autosuspend on dwc3-am62 driver unbind.
Fixes: e8784c0aec03 ("drivers: usb: dwc3: Add AM62 USB wrapper driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241209105728.3216872-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before writing a new value to the register, the old value needs to be
masked out for the new value to be programmed as intended, because at
least in some cases the reset value of that field is 0xf (max value).
At the moment, the dwc3 core initialises the threshold to the maximum
value (0xf), with the option to override it via a DT. No upstream DTs
seem to override it, therefore this commit doesn't change behaviour for
any upstream platform. Nevertheless, the code should be fixed to have
the desired outcome.
Do so.
Fixes: 80caf7d21adc ("usb: dwc3: add lpm erratum support")
Cc: stable@vger.kernel.org # 5.10+ (needs adjustment for 5.4)
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241209-dwc3-nyet-fix-v2-1-02755683345b@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If userspace holds an fd open, unbinds the device and then closes it,
the driver shouldn't try to access the hardware. Protect it by using
drm_dev_enter()/drm_dev_exit(). This fixes the following page fault:
<6> [IGT] xe_wedged: exiting, ret=98
<1> BUG: unable to handle page fault for address: ffffc901bc5e508c
<1> #PF: supervisor read access in kernel mode
<1> #PF: error_code(0x0000) - not-present page
...
<4> xe_lrc_update_timestamp+0x1c/0xd0 [xe]
<4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe]
<4> xe_exec_queue_fini+0x16/0xb0 [xe]
<4> __guc_exec_queue_fini_async+0xc4/0x190 [xe]
<4> guc_exec_queue_fini_async+0xa0/0xe0 [xe]
<4> guc_exec_queue_fini+0x23/0x40 [xe]
<4> xe_exec_queue_destroy+0xb3/0xf0 [xe]
<4> xe_file_close+0xd4/0x1a0 [xe]
<4> drm_file_free+0x210/0x280 [drm]
<4> drm_close_helper.isra.0+0x6d/0x80 [drm]
<4> drm_release_noglobal+0x20/0x90 [drm]
Fixes: 514447a12190 ("drm/xe: Stop accumulating LRC timestamp on job_free")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3421
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218053122.2730195-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4ca1fd418338d4d135428a0eb1e16e3b3ce17ee8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
There is a typo in function call and instead of VF LMEM we were
looking at VF GGTT provisioning. Fix that.
Fixes: 234670cea9a2 ("drm/xe/pf: Skip fair VFs provisioning if already provisioned")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216223253.819-1-michal.wajdeczko@intel.com
(cherry picked from commit a8d0aa0e7fcd20c9f1992688c0f0d07a68287403)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Fix a potential GPU page fault during tt -> system moves by waiting for
migration jobs to complete before unmapping SG. This ensures that IOMMU
mappings are not prematurely torn down while a migration job is still in
progress.
v2: Use intr=false(Matt A)
v3: Update commit message(Matt A)
v4: s/DMA_RESV_USAGE_BOOKKEEP/DMA_RESV_USAGE_KERNEL(Thomas)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3466
Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213122415.3880017-2-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit cda06412c06893a6f07a2fbf89d42a0972ec9e8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Ensure a non-interruptible wait is used when moving a bo to
XE_PL_SYSTEM. This prevents dma_mappings from being removed prematurely
while a GPU job is still in progress, even if the CPU receives a
signal during the operation.
Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213122415.3880017-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit dc5e20ae1f8a7c354dc9833faa2720254e5a5443)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
There is a mesa debug tool for decoding devcoredump files. Recent
changes to improve the devcoredump output broke that tool. So revert
the changes until the tool can be extended to support the new fields.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: c28fd6c358db ("drm/xe/devcoredump: Improve section headings and add tile info")
Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213172833.1733376-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 70fb86a85dc9fd66014d7eb2fe356f50702ceeb6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
update
Make sure the trace_kprobe's module notifer callback function is called
after jump_label's callback is called. Since the trace_kprobe's callback
eventually checks jump_label address during registering new kprobe on
the loading module, jump_label must be updated before this registration
happens.
Link: https://lore.kernel.org/all/173387585556.995044.3157941002975446119.stgit@devnote2/
Fixes: 614243181050 ("tracing/kprobes: Support module init function probing")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Flush CQE handler has not been called if QP state gets into errored
mode in DWQE path. So, the new added outstanding WQEs will never be
flushed.
It leads to a hung task timeout when using NFS over RDMA:
__switch_to+0x7c/0xd0
__schedule+0x350/0x750
schedule+0x50/0xf0
schedule_timeout+0x2c8/0x340
wait_for_common+0xf4/0x2b0
wait_for_completion+0x20/0x40
__ib_drain_sq+0x140/0x1d0 [ib_core]
ib_drain_sq+0x98/0xb0 [ib_core]
rpcrdma_xprt_disconnect+0x68/0x270 [rpcrdma]
xprt_rdma_close+0x20/0x60 [rpcrdma]
xprt_autoclose+0x64/0x1cc [sunrpc]
process_one_work+0x1d8/0x4e0
worker_thread+0x154/0x420
kthread+0x108/0x150
ret_from_fork+0x10/0x18
Fixes: 01584a5edcc4 ("RDMA/hns: Add support of direct wqe")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
WARN_ON() is called in the IO path. And it could lead to a warning
storm. Use WARN_ON_ONCE() instead of WARN_ON().
Fixes: 12542f1de179 ("RDMA/hns: Refactor process about opcode in post_send()")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
If it fails to modify QP to RTR, dip_ctx will not be attached. And
during detroying QP, the invalid dip_ctx pointer will be accessed.
Fixes: faa62440a577 ("RDMA/hns: Fix different dgids mapping to the same dip_idx")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Due to HW limitation, the three region of WQE buffer must be mapped
and set to HW in a fixed order: SQ buffer, SGE buffer, and RQ buffer.
Currently when one region is zero-hop while the other two are not,
the zero-hop region will not be mapped. This violate the limitation
above and leads to address error.
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This reverts commit 417d8c47271d5cf1a705e997065873b2a9a36fd4.
With that patch the panel in the Tentacruel ASUS Chromebook CM14
(CM1402F) flickers. There are 1 or 2 times per second a black panel.
Stable Kernel 6.11.5 and mainline 6.12-rc4 works only when reverse
that patch.
Fixes: 417d8c47271d ("drm/mediatek: dsi: Correct calculation formula of PHY Timing")
Cc: stable@vger.kernel.org
Cc: Shuijing Li <shuijing.li@mediatek.com>
Reported-by: Jens Ziller <zillerbaer@gmx.de>
Closes: https://patchwork.kernel.org/project/dri-devel/patch/20240412031208.30688-1-shuijing.li@mediatek.com/
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241212001908.6056-1-chunkuang.hu@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The last use of is_server_using_iface() was removed in 2022 by
commit aa45dadd34e4 ("cifs: change iface_list from array to sorted linked
list")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Previously, deferred file handles were reused only for read
operations, this commit extends to reusing deferred handles
for write operations. By reusing these handles we can reduce
the need for open/close operations over the wire.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since the dynamic preemption has been enabled for PREEMPT_RT we have now
CONFIG_PREEMPT and CONFIG_PREEMPT_RT set simultaneously. This affects
the vermagic strings which comes now PREEMPT with PREEMPT_RT enabled.
The PREEMPT_RT module usually can not be loaded on a PREEMPT kernel
because some symbols are missing.
However if the symbols are fine then it continues and it crashes later.
The problem is that the struct module has a different layout and the
num_exentries or init members are at a different position leading to a
crash later on. This is not necessary caught by the size check in
elf_validity_cache_index_mod() because the mem member has an alignment
requirement of __module_memory_align which is big enough keep the total
size unchanged. Therefore we should keep the string accurate instead of
removing it.
Move the PREEMPT_RT check before the PREEMPT so that it takes precedence
if both symbols are enabled.
Fixes: 35772d627b55c ("sched: Enable PREEMPT_DYNAMIC for PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20241205160602.3lIAsJRT@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
|
|
Pull KVM x86 fixes from Paolo Bonzini:
- Disable AVIC on SNP-enabled systems that don't allow writes to the
virtual APIC page, as such hosts will hit unexpected RMP #PFs in the
host when running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to
determine if a guest with protected register state is in 64-bit mode
(KVM's ABI is to assume such guests only make hypercalls in 64-bit
mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix
a regression with Windows guests, and because KVM's read-only
behavior appears to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed
given the existing SPTE. This fixes a benign WARN (other than the
WARN itself) due to unexpectedly replacing a writable SPTE with a
read-only SPTE.
- Emit a warning when KVM is configured with ignore_msrs=1 and also to
hide the MSRs that the guest is looking for from the kernel logs.
ignore_msrs can trick guests into assuming that certain processor
features are present, and this in turn leads to bogus bug reports.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: let it be known that ignore_msrs is a bad idea
KVM: VMX: don't include '<linux/find.h>' directly
KVM: x86/mmu: Treat TDP MMU faults as spurious if access is already allowed
KVM: SVM: Allow guest writes to set MSR_AMD64_DE_CFG bits
KVM: x86: Play nice with protected guests in complete_hypercall_exit()
KVM: SVM: Disable AVIC on SNP-enabled system without HvInUseWrAllowed feature
|
|
KVM x86 fixes for 6.13:
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
|
|
When running KVM with ignore_msrs=1 and report_ignored_msrs=0, the user has
no clue that that the guest is being lied to. This may cause bug reports
such as https://gitlab.com/qemu-project/qemu/-/issues/2571, where enabling
a CPUID bit in QEMU caused Linux guests to try reading MSR_CU_DEF_ERR; and
being lied about the existence of MSR_CU_DEF_ERR caused the guest to assume
other things about the local APIC which were not true:
Sep 14 12:02:53 kernel: mce: [Firmware Bug]: Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.
Sep 14 12:02:53 kernel: unchecked MSR access error: RDMSR from 0x852 at rIP: 0xffffffffb548ffa7 (native_read_msr+0x7/0x40)
Sep 14 12:02:53 kernel: Call Trace:
...
Sep 14 12:02:53 kernel: native_apic_msr_read+0x20/0x30
Sep 14 12:02:53 kernel: setup_APIC_eilvt+0x47/0x110
Sep 14 12:02:53 kernel: mce_amd_feature_init+0x485/0x4e0
...
Sep 14 12:02:53 kernel: [Firmware Bug]: cpu 0, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu
Without reported_ignored_msrs=0 at least the host kernel log will contain
enough information to avoid going on a wild goose chase. But if reports
about individual MSR accesses are being silenced too, at least complain
loudly the first time a VM is started.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The header clearly states that it does not want to be included directly,
only via '<linux/bitmap.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-ID: <20241217070539.2433-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks)
platforms
- Add missing root #address-cells/#size-cells in default empty DT
- Fix uninitialized variable in of_irq_parse_one()
- Fix interrupt-map cell length check in of_irq_parse_imap_parent()
- Fix refcount handling in __of_get_dma_parent()
- Fix error path in of_parse_phandle_with_args_map()
- Fix dma-ranges handling with flags cells
- Drop explicit fw_devlink handling of 'interrupt-parent'
- Fix "compression" typo in fixed-partitions binding
- Unify "fsl,liodn" property type definitions
* tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add coreboot firmware to excluded default cells list
of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one()
of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent()
of: Fix refcount leakage for OF node returned by __of_get_dma_parent()
of: Fix error path in of_parse_phandle_with_args_map()
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
of: Add #address-cells/#size-cells in the device-tree root empty node
dt-bindings: Unify "fsl,liodn" type definitions
of: address: Preserve the flags portion on 1:1 dma-ranges mapping
of/unittest: Add empty dma-ranges address translation tests
of: property: fw_devlink: Do not use interrupt-parent directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 19 are MM and 6 are non-MM.
The usual bunch of singletons and doubletons - please see the relevant
changelogs for details"
* tag 'mm-hotfixes-stable-2024-12-21-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm: huge_memory: handle strsep not finding delimiter
alloc_tag: fix set_codetag_empty() when !CONFIG_MEM_ALLOC_PROFILING_DEBUG
alloc_tag: fix module allocation tags populated area calculation
mm/codetag: clear tags before swap
mm/vmstat: fix a W=1 clang compiler warning
mm: convert partially_mapped set/clear operations to be atomic
nilfs2: fix buffer head leaks in calls to truncate_inode_pages()
vmalloc: fix accounting with i915
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
fork: avoid inappropriate uprobe access to invalid mm
nilfs2: prevent use of deleted inode
zram: fix uninitialized ZRAM not releasing backing device
zram: refuse to use zero sized block device as backing device
mm: use clear_user_(high)page() for arch with special user folio handling
mm: introduce cpu_icache_is_aliasing() across all architectures
mm: add RCU annotation to pte_offset_map(_lock)
mm: correctly reference merged VMA
mm: use aligned address in copy_user_gigantic_page()
mm: use aligned address in clear_gigantic_page()
mm: shmem: fix ShmemHugePages at swapout
...
|
|
My tests run an allyesconfig build and it failed with the following errors:
LD [M] samples/kfifo/dma-example.ko
ld.lld: error: undefined symbol: nec7210_board_reset
ld.lld: error: undefined symbol: nec7210_read
ld.lld: error: undefined symbol: nec7210_write
It appears that some modules call the function nec7210_board_reset()
that is defined in nec7210.c. In an allyesconfig build, these other
modules are built in. But the file that holds nec7210_board_reset()
has:
obj-m += nec7210.o
Where that "-m" means it only gets built as a module. With the other
modules built in, they have no access to nec7210_board_reset() and the build
fails.
This isn't the only function. After fixing that one, I hit another:
ld.lld: error: undefined symbol: push_gpib_event
ld.lld: error: undefined symbol: gpib_match_device_path
Where push_gpib_event() was also used outside of the file it was defined
in, and that file too only was built as a module.
Since the directory that nec7210.c is only traversed when
CONFIG_GPIB_NEC7210 is set, and the directory with gpib_common.c is only
traversed when CONFIG_GPIB_COMMON is set, use those configs as the
option to build those modules. When it is an allyesconfig, then they
will both be built in and their functions will be available to the other
modules that are also built in.
Fixes: 3ba84ac69b53e ("staging: gpib: Add nec7210 GPIB chip driver")
Fixes: 9dde4559e9395 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove stale code in usr/include/headers_check.pl
- Fix issues in the user-mode-linux Debian package
- Fix false-positive "export twice" errors in modpost
* tag 'kbuild-fixes-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: distinguish same module paths from different dump files
kbuild: deb-pkg: Do not install maint scripts for arch 'um'
kbuild: deb-pkg: add debarch for ARCH=um
kbuild: Drop support for include/asm-<arch> in headers_check.pl
|
|
Pull BPF fixes from Daniel Borkmann:
- Fix inlining of bpf_get_smp_processor_id helper for !CONFIG_SMP
systems (Andrea Righi)
- Fix BPF USDT selftests helper code to use asm constraint "m" for
LoongArch (Tiezhu Yang)
- Fix BPF selftest compilation error in get_uprobe_offset when
PROCMAP_QUERY is not defined (Jerome Marchand)
- Fix BPF bpf_skb_change_tail helper when used in context of BPF
sockmap to handle negative skb header offsets (Cong Wang)
- Several fixes to BPF sockmap code, among others, in the area of
socket buffer accounting (Levi Zim, Zijian Zhang, Cong Wang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test bpf_skb_change_tail() in TC ingress
selftests/bpf: Introduce socket_helpers.h for TC tests
selftests/bpf: Add a BPF selftest for bpf_skb_change_tail()
bpf: Check negative offsets in __bpf_skb_min_len()
tcp_bpf: Fix copied value in tcp_bpf_sendmsg
skmsg: Return copied bytes in sk_msg_memcopy_from_iter
tcp_bpf: Add sk_rmem_alloc related logic for tcp_bpf ingress redirection
tcp_bpf: Charge receive socket buffer in bpf_tcp_ingress()
selftests/bpf: Fix compilation error in get_uprobe_offset()
selftests/bpf: Use asm constraint "m" for LoongArch
bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a clang build issue with mediatec vcodec
- add missing variable initialization to dib3000mb write function
* tag 'media/v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinline
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Krzysztof Wilczyński:
"Two small patches that are important for fixing boot time hang on
Intel JHL7540 'Titan Ridge' platforms equipped with a Thunderbolt
controller.
The boot time issue manifests itself when a PCI Express bandwidth
control is unnecessarily enabled on the Thunderbolt controller
downstream ports, which only supports a link speed of 2.5 GT/s in
accordance with USB4 v2 specification (p. 671, sec. 11.2.1, "PCIe
Physical Layer Logical Sub-block").
As such, there is no need to enable bandwidth control on such
downstream port links, which also works around the issue.
Both patches were tested by the original reporter on the hardware on
which the failure origin golly manifested itself. Both fixes were
proven to resolve the reported boot hang issue, and both patches have
been in linux-next this week with no reported problems"
* tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Enable only if more than one speed is supported
PCI: Honor Max Link Speed when determining supported speeds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some amd-pstate driver issues:
- Detect preferred core support in amd-pstate before driver
registration to avoid initialization ordering issues (K Prateek
Nayak)
- Fix issues with with boost numerator handling in amd-pstate leading
to inconsistently programmed CPPC max performance values (Mario
Limonciello)"
* tag 'pm-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Use boost numerator for upper bound of frequencies
cpufreq/amd-pstate: Store the boost numerator as highest perf again
cpufreq/amd-pstate: Detect preferred core support before driver registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues with the user thermal thresholds feature introduced in
this development cycle (Daniel Lezcano)"
* tag 'thermal-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/thresholds: Fix boundaries and detection routine
thermal/thresholds: Fix uapi header macros leading to a compilation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Unbreak ACPI EC support on LoongArch that has been broken earlier in
this development cycle (Huacai Chen)"
* tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Enable EC support on LoongArch by default
|
|
Pull smb client fixes from Steve French:
- fix regression in display of write stats
- fix rmmod failure with network namespaces
- two minor cleanups
* tag '6.13-rc3-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: fix bytes written value in /proc/fs/cifs/Stats
smb: client: fix TCP timers deadlock after rmmod
smb: client: Deduplicate "select NETFS_SUPPORT" in Kconfig
smb: use macros instead of constants for leasekey size and default cifsattrs value
|
|
Pull NFS client fixes from Trond Myklebust:
- NFS/pnfs: Fix a live lock between recalled layouts and layoutget
- Fix a build warning about an undeclared symbol 'nfs_idmap_cache_timeout'
* tag 'nfs-for-6.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
fs/nfs: fix missing declaration of nfs_idmap_cache_timeout
NFS/pnfs: Fix a live lock between recalled layouts and layoutget
|
