| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-02-08:
amdgpu:
- Flickering fixes for DCN 2.1, 3.1.2/3
- Re-enable S/G display on DCN 3.1.4
- Properly fix S/G display with AGP aperture enabled
- Fix cursor offset with 180 rotation
- SMU13 fixes
- Use TGID for GPUVM traces
- Fix oops on in fence error path
- Don't run IB tests on hw rings when sw rings are in use
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209045321.565132-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
ipsec 2023-02-08
1) Fix policy checks for nested IPsec tunnels when using
xfrm interfaces. From Benedict Wong.
2) Fix netlink message expression on 32=>64-bit
messages translators. From Anastasia Belova.
3) Prevent potential spectre v1 gadget in xfrm_xlate32_attr.
From Eric Dumazet.
4) Always consistently use time64_t in xfrm_timer_handler.
From Eric Dumazet.
5) Fix KCSAN reported bug: Multiple cpus can update use_time
at the same time. From Eric Dumazet.
6) Fix SCP copy from IPv4 to IPv6 on interfamily tunnel.
From Christian Hopps.
* tag 'ipsec-2023-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix bug with DSCP copy to v6 from v4 tunnel
xfrm: annotate data-race around use_time
xfrm: consistently use time64_t in xfrm_timer_handler()
xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr()
xfrm: compat: change expression for switch in xfrm_xlate64
Fix XFRM-I support for nested ESP tunnels
====================
Link: https://lore.kernel.org/r/20230208114322.266510-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
can-next 2023-02-08
The 1st patch is by Oliver Hartkopp and cleans up the CAN_RAW's
raw_setsockopt() for CAN_RAW_FD_FRAMES.
The 2nd patch is by me and fixes the compilation if
CONFIG_CAN_CALC_BITTIMING is disabled. (Problem introduced in last
pull request to next-next.)
* tag 'linux-can-next-for-6.3-20230208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: bittiming: can_calc_bittiming(): add missing parameter to no-op function
can: raw: use temp variable instead of rolling back config
====================
Link: https://lore.kernel.org/r/20230208210014.3169347-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-next-netdev-deadlock
This series from Jiri solves a deadlock when removing a network namespace
with mlx5 devlink instance being in it.
The deadlock is between:
1) mlx5_ib->unregister_netdevice_notifier()
AND
2) mlx5_core->devlink_reload->cleanup_net()
To slove this introduced mlx5 netdev added/removed events to track uplink
netdev to be used for register_netdevice_notifier_dev_net() purposes.
* tag 'mlx5-next-netdev-deadlock' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
RDMA/mlx5: Track netdev to avoid deadlock during netdev notifier unregister
net/mlx5e: Propagate an internal event in case uplink netdev changes
net/mlx5e: Fix trap event handling
net/mlx5: Introduce CQE error syndrome
====================
Link: https://lore.kernel.org/r/20230208005626.72930-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
./drivers/net/ethernet/wangxun/libwx/wx_lib.c:683:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3976
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230208004959.47553-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/ethernet/wangxun/libwx/wx_lib.c:1835 wx_setup_all_rx_resources() warn: inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3981
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230208013227.111605-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update new email address for Wangxun 10Gb NIC support team.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20230208023035.3371250-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When removing a network namespace with mlx5 devlink instance being in
it, following callchain is performed:
cleanup_net (takes down_read(&pernet_ops_rwsem)
devlink_pernet_pre_exit()
devlink_reload()
mlx5_devlink_reload_down()
mlx5_unload_one_devl_locked()
mlx5_detach_device()
del_adev()
mlx5r_remove()
__mlx5_ib_remove()
mlx5_ib_roce_cleanup()
mlx5_remove_netdev_notifier()
unregister_netdevice_notifier (takes down_write(&pernet_ops_rwsem)
This deadlocks.
Resolve this by converting to register_netdevice_notifier_dev_net()
which does not take pernet_ops_rwsem and moves the notifier block around
according to netdev it takes as arg.
Use previously introduced netdev added/removed events to track uplink
netdev to be used for register_netdevice_notifier_dev_net() purposes.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Whenever uplink netdev is set/cleared, propagate newly introduced event
to inform notifier blocks netdev was added/removed.
Move the set() helper to core.c from header, introduce clear() and
netdev_added_event_replay() helpers. The last one is going to be called
from rdma driver, so export it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Current code does not return correct return value from event handler.
Fix it by returning NOTIFY_* and propagate err over newly introduce ctx
structure.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
sriov does not need to init pptable from amdgpu driver
we finish it from PF
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
test ib function is not necessary on hw ring,
so remove it.
v2: squash in NULL check fix
Signed-off-by: JesseZhang <Jesse.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently amdgpu calls drm_sched_fini() from the fence driver sw fini
routine - such function is expected to be called only after the
respective init function - drm_sched_init() - was executed successfully.
Happens that we faced a driver probe failure in the Steam Deck
recently, and the function drm_sched_fini() was called even without
its counter-part had been previously called, causing the following oops:
amdgpu: probe of 0000:04:00.0 failed with error -110
BUG: kernel NULL pointer dereference, address: 0000000000000090
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 609 Comm: systemd-udevd Not tainted 6.2.0-rc3-gpiccoli #338
Hardware name: Valve Jupiter/Jupiter, BIOS F7A0113 11/04/2022
RIP: 0010:drm_sched_fini+0x84/0xa0 [gpu_sched]
[...]
Call Trace:
<TASK>
amdgpu_fence_driver_sw_fini+0xc8/0xd0 [amdgpu]
amdgpu_device_fini_sw+0x2b/0x3b0 [amdgpu]
amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
devm_drm_dev_init_release+0x49/0x70
[...]
To prevent that, check if the drm_sched was properly initialized for a
given ring before calling its fini counter-part.
Notice ideally we'd use sched.ready for that; such field is set as the latest
thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such
field - in the above oops for example, it was a GFX ring causing the crash, and
the sched.ready field was set to true in the ring init routine, regardless of
the state of the DRM scheduler. Hence, we ended-up using sched.ops as per
Christian's suggestion [0], and also removed the no_scheduler check [1].
[0] https://lore.kernel.org/amd-gfx/984ee981-2906-0eaf-ccec-9f80975cb136@amd.com/
[1] https://lore.kernel.org/amd-gfx/cd0e2994-f85f-d837-609f-7056d5fb7231@amd.com/
Fixes: 067f44c8b459 ("drm/amdgpu: avoid over-handle of fence driver fini in s3 test (v2)")
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The pid field corresponds to the result of gettid() in userspace.
However, userspace cannot reliably attribute PTE events to processes
with just the thread id. This patch allows userspace to easily
attribute PTE update events to specific processes by comparing this
field with the result of getpid().
For attributing events to specific threads, the thread id is also
contained in the common fields of each trace event.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
These can support unique_id, so create the sysfs file for them
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
This can suppress the warning caused by version mismatch.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
This can suppress the warning caused by version mismatch.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Add missing GetPptLimit message mapping.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-02-07
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Serialize module cleanup with reload and remove
net/mlx5: fw_tracer, Zero consumer index when reloading the tracer
net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffers
net/mlx5: Expose SF firmware pages counter
net/mlx5: Store page counters in a single array
net/mlx5e: IPoIB, Show unknown speed instead of error
net/mlx5e: Fix crash unsetting rx-vlan-filter in switchdev mode
net/mlx5: Bridge, fix ageing of peer FDB entries
net/mlx5: DR, Fix potential race in dr_rule_create_rule_nic
net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change
====================
Link: https://lore.kernel.org/r/20230208030302.95378-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cursor gets clipped off in the middle of the screen with hw rotation
180. Fix a miscalculation of cursor offset when it's placed near the
edges in the pipe split case.
Cursor bugs with hw rotation were reported on AMD issue tracker:
https://gitlab.freedesktop.org/drm/amd/-/issues/2247
The issues on rotation 270 was fixed by:
https://lore.kernel.org/amd-gfx/20221118125935.4013669-22-Brian.Chang@amd.com/
that partially addressed the rotation 180 too. So, this patch is the
final bits for rotation 180.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 9d84c7ef8a87 ("drm/amd/display: Correct cursor position on horizontal mirror")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
enable athub cg on gc 11.0.3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 9aa15370819294beb7eb67c9dcbf654d79ff8790.
This is fixed now so we can re-enable S/G display on DCN
3.1.4.
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Take into account whether or not the AGP aperture is
enabled or not when calculating the system aperture.
Fixes white screens with DCN 3.1.4.
Based on a patch from Yifan Zhang <yifan1.zhang@amd.com>
Cc: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352
Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352
Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-02-07
1) Minor and trivial code Cleanups
2) Minor fixes for net-next
3) From Shay: dynamic FW trace strings update.
* tag 'mlx5-updates-2023-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: fw_tracer, Add support for unrecognized string
net/mlx5: fw_tracer, Add support for strings DB update event
net/mlx5: fw_tracer, allow 0 size string DBs
net/mlx5: fw_tracer: Fix debug print
net/mlx5: fs, Remove redundant assignment of size
net/mlx5: fs_core, Remove redundant variable err
net/mlx5: Fix memory leak in error flow of port set buffer
net/mlx5e: Remove incorrect debugfs_create_dir NULL check in TLS
net/mlx5e: Remove incorrect debugfs_create_dir NULL check in hairpin
net/mlx5: fs, Remove redundant vport_number assignment
net/mlx5e: Remove redundant code for handling vlan actions
net/mlx5e: Don't listen to remove flows event
net/mlx5: fw reset: Skip device ID check if PCI link up failed
net/mlx5: Remove redundant health work lock
mlx5: reduce stack usage in mlx5_setup_tc
====================
Link: https://lore.kernel.org/r/20230208003712.68386-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iproute2 does not recognize the "group6" and "remote6" keywords. Fix by
using "group" and "remote" instead.
Before:
# ./test_vxlan_vnifiltering.sh
[...]
Tests passed: 25
Tests failed: 2
After:
# ./test_vxlan_vnifiltering.sh
[...]
Tests passed: 27
Tests failed: 0
Fixes: 3edf5f66c12a ("selftests: add new tests for vxlan vnifiltering")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230207141819.256689-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit fe3300897cbf("samples: bpf: fix syscall_tp due to unused syscall")
added openat() syscall tracepoints. This patch adds support for
openat2() as well.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_9381CB1A158ED7ADD12C4406034E21A3AC07@qq.com
|
|
Add option to set when the perf buffer should wake up, by default the
perf buffer becomes signaled for every event that is being pushed to it.
In case of a high throughput of events it will be more efficient to wake
up only once you have X events ready to be read.
So your application can wakeup once and drain the entire perf buffer.
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230207081916.3398417-1-arilou@gmail.com
|
|
In commit 286c0e09e8e0 ("can: bittiming: can_changelink() pass extack
down callstack") a new parameter was added to can_calc_bittiming(),
however the static inline no-op (which is used if
CONFIG_CAN_CALC_BITTIMING is disabled) wasn't converted.
Add the new parameter to the static inline no-op of
can_calc_bittiming().
Fixes: 286c0e09e8e0 ("can: bittiming: can_changelink() pass extack down callstack")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/20230207201734.2905618-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Introduce a temporary variable to check for an invalid configuration
attempt from user space. Before this patch the value was copied to
the real config variable and rolled back in the case of an error.
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230203090807.97100-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Intel confirmed the existence of this CPU in Q4'2022
earnings presentation.
Add the CPU model number.
[ dhansen: Merging these as soon as possible makes it easier
on all the folks developing model-specific features. ]
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20230208172340.158548-1-tony.luck%40intel.com
|
|
Commit 3bc753c06dd0 ("kbuild: treat char as always unsigned") broke
kprobes. Setting a probe-point on 1 byte conditional jump can cause the
kernel to crash when the (signed) relative jump offset gets treated as
unsigned.
Fix by replacing the unsigned 'immediate.bytes' (plus a cast) with the
signed 'immediate.value' when assigning to the relative jump offset.
[ dhansen: clarified changelog ]
Fixes: 3bc753c06dd0 ("kbuild: treat char as always unsigned")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20230208071708.4048-1-namit%40vmware.com
|
|
Move xdp_features configuration from efx_pci_probe() to
efx_pci_probe_post_io() since it is where all the other basic netdev
features are initialised.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/9bd31c9a29bcf406ab90a249a28fc328e5578fd1.1675875404.git.lorenzo@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add explanation about use of "u64", "u32", etc. as
the type convention used in BPF documentation.
Signed-off-by: Dave Thaler <dthaler@microsoft.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230127014706.1005-1-dthaler1968@googlemail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cong pointed out that there are some inconsistencies between the BPF design
QA and the lifecycle expectations documentation we added for kfuncs. Let's
update the QA file to be consistent with the kfunc docs, and add references
where it makes sense. Also document that modules may export kfuncs now.
v3:
- Grammar nit + ack from David
v2:
- Fix repeated word (s/defined defined/defined/)
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230208164143.286392-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Turns out modern (icl+) VBTs still declare their DSI ports
as MIPI-A and MIPI-C despite the PHYs now being A and B.
Remap appropriately to allow the panels declared as MIPI-C
to work.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 118b5c136c04da705b274b0d39982bb8b7430fc5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Vladimir Oltean says:
====================
taprio automatic queueMaxSDU and new TXQ selection procedure
This patch set addresses 2 design limitations in the taprio software scheduler:
1. Software scheduling fundamentally prioritizes traffic incorrectly,
in a way which was inspired from Intel igb/igc drivers and does not
follow the inputs user space gives (traffic classes and TC to TXQ
mapping). Patch 05/15 handles this, 01/15 - 04/15 are preparations
for this work.
2. Software scheduling assumes that the gate for a traffic class closes
as soon as the next interval begins. But this isn't true.
If consecutive schedule entries have that traffic class gate open,
there is no "gate close" event and taprio should keep dequeuing from
that TC without interruptions. Patches 06/15 - 15/15 handle this.
Patch 10/15 is a generic Qdisc change required for this to work.
Future development directions which depend on this patch set are:
- Propagating the automatic queueMaxSDU calculation down to offloading
device drivers, instead of letting them calculate this, as
vsc9959_tas_guard_bands_update() does today.
- A software data path for tc-taprio with preemptible traffic and
Hold/Release events.
v1 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230128010719.2182346-1-vladimir.oltean@nxp.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Improve commit 497cc00224cf ("taprio: Handle short intervals and large
packets") to only perform segmentation when skb->len exceeds what
taprio_dequeue() expects.
In practice, this will make the biggest difference when a traffic class
gate is always open in the schedule. This is because the max_frm_len
will be U32_MAX, and such large skb->len values as Kurt reported will be
sent just fine unsegmented.
What I don't seem to know how to handle is how to make sure that the
segmented skbs themselves are smaller than the maximum frame size given
by the current queueMaxSDU[tc]. Nonetheless, we still need to drop
those, otherwise the Qdisc will hang.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The majority of the taprio_enqueue()'s function is spent doing TCP
segmentation, which doesn't look right to me. Compilers shouldn't have a
problem in inlining code no matter how we write it, so move the
segmentation logic to a separate function.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
durations
taprio today has a huge problem with small TC gate durations, because it
might accept packets in taprio_enqueue() which will never be sent by
taprio_dequeue().
Since not much infrastructure was available, a kludge was added in
commit 497cc00224cf ("taprio: Handle short intervals and large
packets"), which segmented large TCP segments, but the fact of the
matter is that the issue isn't specific to large TCP segments (and even
worse, the performance penalty in segmenting those is absolutely huge).
In commit a54fc09e4cba ("net/sched: taprio: allow user input of per-tc
max SDU"), taprio gained support for queueMaxSDU, which is precisely the
mechanism through which packets should be dropped at qdisc_enqueue() if
they cannot be sent.
After that patch, it was necessary for the user to manually limit the
maximum MTU per TC. This change adds the necessary logic for taprio to
further limit the values specified (or not specified) by the user to
some minimum values which never allow oversized packets to be sent.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I have one practical reason for doing this and one concerning correctness.
The practical reason has to do with a follow-up patch, which aims to mix
2 sources of max_sdu (one coming from the user and the other automatically
calculated based on TC gate durations @current link speed). Among those
2 sources of input, we must always select the smaller max_sdu value, but
this can change at various link speeds. So the max_sdu coming from the
user must be kept separated from the value that is operationally used
(the minimum of the 2), because otherwise we overwrite it and forget
what the user asked us to do.
To solve that, this patch proposes that struct sched_gate_list contains
the operationally active max_frm_len, and q->max_sdu contains just what
was requested by the user.
The reason having to do with correctness is based on the following
observation: the admin sched_gate_list becomes operational at a given
base_time in the future. Until then, it is inactive and applies no
shaping, all gates are open, etc. So the queueMaxSDU dropping shouldn't
apply either (this is a mechanism to ensure that packets smaller than
the largest gate duration for that TC don't hang the port; clearly it
makes little sense if the gates are always open).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vinicius intended taprio to take the L1 overhead into account when
estimating packet transmission time through user input, specifically
through the qdisc size table (man tc-stab).
Something like this:
tc qdisc replace dev $eth root stab overhead 24 taprio \
num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 \
sched-entry S 0x7e 9000000 \
sched-entry S 0x82 1000000 \
max-sdu 0 0 0 0 0 0 0 200 \
flags 0x0 clockid CLOCK_TAI
Without the overhead being specified, transmission times will be
underestimated and will cause late transmissions. For an offloading
driver, it might even cause TX hangs if there is no open gate large
enough to send the maximum sized packets for that TC (including L1
overhead). Properly knowing the L1 overhead will ensure that we are able
to auto-calculate the queueMaxSDU per traffic class just right, and
avoid these hangs due to head-of-line blocking.
We can't make the stab mandatory due to existing setups, but we can warn
the user that it's important with a warning netlink extack.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220505160357.298794-1-vladimir.oltean@nxp.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some qdiscs like taprio turn out to be actually pretty reliant on a well
configured stab, to not underestimate the skb transmission time (by
properly accounting for L1 overhead).
In a future change, taprio will need the stab, if configured by the
user, to be available at ops->init() time. It will become even more
important in upcoming work, when the overhead will be used for the
queueMaxSDU calculation that is passed to an offloading driver.
However, rcu_assign_pointer(sch->stab, stab) is called right after
ops->init(), making it unavailable, and I don't really see a good reason
for that.
Move it earlier, which nicely seems to simplify the error handling path
as well.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
taprio_dequeue_from_txq() looks at the entry->end_time to determine
whether the skb will overrun its traffic class gate, as if at the end of
the schedule entry there surely is a "gate close" event for it. Hint:
maybe there isn't.
For each schedule entry, introduce an array of kernel times which
actually tracks when in the future will there be an *actual* gate close
event for that traffic class, and use that in the guard band overrun
calculation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently taprio assumes that the budget for a traffic class expires at
the end of the current interval as if the next interval contains a "gate
close" event for this traffic class.
This is, however, an unfounded assumption. Allow schedule entry
intervals to be fused together for a particular traffic class by
calculating the budget until the gate *actually* closes.
This means we need to keep budgets per traffic class, and we also need
to update the budget consumption procedure.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a confusion in terms in taprio which makes what is called
"close_time" to be actually used for 2 things:
1. determining when an entry "closes" such that transmitted skbs are
never allowed to overrun that time (?!)
2. an aid for determining when to advance and/or restart the schedule
using the hrtimer
It makes more sense to call this so-called "close_time" "end_time",
because it's not clear at all to me what "closes". Future patches will
hopefully make better use of the term "to close".
This is an absolutely mechanical change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current taprio code operates on a very simplistic (and incorrect)
assumption: that egress scheduling for a traffic class can only take
place for the duration of the current interval, or i.o.w., it assumes
that at the end of each schedule entry, there is a "gate close" event
for all traffic classes.
As an example, traffic sent with the schedule below will be jumpy, even
though all 8 TC gates are open, so there is absolutely no "gate close"
event (effectively a transition from BIT(tc)==1 to BIT(tc)==0 in
consecutive schedule entries):
tc qdisc replace dev veth0 parent root taprio \
num_tc 2 \
map 0 1 \
queues 1@0 1@1 \
base-time 0 \
sched-entry S 0xff 4000000000 \
clockid CLOCK_TAI \
flags 0x0
This qdisc simply does not have what it takes in terms of logic to
*actually* compute the durations of traffic classes. Also, it does not
recognize the need to use this information on a per-traffic-class basis:
it always looks at entry->interval and entry->close_time.
This change proposes that each schedule entry has an array called
tc_gate_duration[tc]. This holds the information: "for how long will
this traffic class gate remain open, starting from *this* schedule
entry". If the traffic class gate is always open, that value is equal to
the cycle time of the schedule.
We'll also need to keep track, for the purpose of queueMaxSDU[tc]
calculation, what is the maximum time duration for a traffic class
having an open gate. This gives us directly what is the maximum sized
packet that this traffic class will have to accept. For everything else
it has to qdisc_drop() it in qdisc_enqueue().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current taprio software implementation is haunted by the shadow of the
igb/igc hardware model. It iterates over child qdiscs in increasing
order of TXQ index, therefore giving higher xmit priority to TXQ 0 and
lower to TXQ N. According to discussions with Vinicius, that is the
default (perhaps even unchangeable) prioritization scheme used for the
NICs that taprio was first written for (igb, igc), and we have a case of
two bugs canceling out, resulting in a functional setup on igb/igc, but
a less sane one on other NICs.
To the best of my understanding, taprio should prioritize based on the
traffic class, so it should really dequeue starting with the highest
traffic class and going down from there. We get to the TXQ using the
tc_to_txq[] netdev property.
TXQs within the same TC have the same (strict) priority, so we should
pick from them as fairly as we can. We can achieve that by implementing
something very similar to q->curband from multiq_dequeue().
Since igb/igc really do have TXQ 0 of higher hardware priority than
TXQ 1 etc, we need to preserve the behavior for them as well. We really
have no choice, because in txtime-assist mode, taprio is essentially a
software scheduler towards offloaded child tc-etf qdiscs, so the TXQ
selection really does matter (not all igb TXQs support ETF/SO_TXTIME,
says Kurt Kanzenbach).
To preserve the behavior, we need a capability bit so that taprio can
determine if it's running on igb/igc, or on something else. Because igb
doesn't offload taprio at all, we can't piggyback on the
qdisc_offload_query_caps() call from taprio_enable_offload(), but
instead we need a separate call which is also made for software
scheduling.
Introduce two static keys to minimize the performance penalty on systems
which only have igb/igc NICs, and on systems which only have other NICs.
For mixed systems, taprio will have to dynamically check whether to
dequeue using one prioritization algorithm or using the other.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify taprio_dequeue_from_txq() by noticing that we can goto one call
earlier than the previous skb_found label. This is possible because
we've unified the treatment of the child->ops->dequeue(child) return
call, we always try other TXQs now, instead of abandoning the root
dequeue completely if we failed in the peek() case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
