summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-14gpio: fix sleep-while-atomic in gpiochip_removeJohan Hovold
Move direct and indirect calls to gpiochip_remove_pin_ranges outside of spin lock as they can end up taking a mutex in pinctrl_remove_gpio_range. Note that the pin ranges are already added outside of the lock. Fixes: 9ef0d6f7628b ("gpiolib: call pin removal in chip removal function") Fixes: f23f1516b675 ("gpiolib: provide provision to register pin ranges") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14gpio: fix memory leak and sleep-while-atomicJohan Hovold
Fix memory leak and sleep-while-atomic in gpiochip_remove. The memory leak was introduced by afa82fab5e13 ("gpio / ACPI: Move event handling registration to gpiolib irqchip helpers") that moved the release of acpi interrupt resources to gpiochip_irqchip_remove, but by then the resources are no longer accessible as the acpi_gpio_chip has already been freed by acpi_gpiochip_remove. Note that this also fixes a few potential sleep-while-atomics, which has been around since 1425052097b5 ("gpio: add IRQ chip helpers in gpiolib") when the call to gpiochip_irqchip_remove while holding a spinlock was added (a couple of irq-domain paths can end up grabbing mutexes). Fixes: afa82fab5e13 ("gpio / ACPI: Move event handling registration to gpiolib irqchip helpers") Fixes: 1425052097b5 ("gpio: add IRQ chip helpers in gpiolib") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14gpio: clean up gpiochip_add error handlingJohan Hovold
Clean up gpiochip_add error handling. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14gpio: fix gpio-chip list corruptionJohan Hovold
Fix potential corruption of gpio-chip list due to failure to remove the chip from the list before returning in gpiochip_add error path. The chip could be long gone when the global list is next traversed, something which could lead to a null-pointer dereference. In the best case (chip not deallocated) we are just leaking the gpio range. Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14gpio: fix memory and reference leaks in gpiochip_add error pathJohan Hovold
Memory allocated and references taken by of_gpiochip_add and acpi_gpiochip_add were never released on errors in gpiochip_add (e.g. failure to find free gpio range). Fixes: 391c970c0dd1 ("of/gpio: add default of_xlate function if device has a node pointer") Fixes: 664e3e5ac64c ("gpio / ACPI: register to ACPI events automatically") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: lantiq: remove bogus of_gpio_chip_addJohan Hovold
Remove bogus call to of_gpiochip_add (and of_gpio_chip remove in error path) which is also called when adding the gpio chip. This prevents adding the same pinctrl range twice. Fixes: 3f8c50c9b110 ("OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: Fix two deadlocksJim Lin
This patch is to fix two deadlock cases. Deadlock 1: CPU #1 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #0 pinctrl_unregister (Holding lock pinctrldev_list_mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) Simply to say CPU#1 is holding lock A and trying to acquire lock B, CPU#0 is holding lock B and trying to acquire lock A. Deadlock 2: CPU #3 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #2 pinctrl_unregister (Holding lock pctldev->mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) CPU #0 tegra_gpio_request (Holding lock pinctrldev_list_mutex) -> pinctrl_get_device_gpio_range (Trying to acquire lock pctldev->mutex) Simply to say CPU#3 is holding lock A and trying to acquire lock D, CPU#2 is holding lock B and trying to acquire lock A, CPU#0 is holding lock D and trying to acquire lock B. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: rockchip: Avoid losing interrupts when supporting both edgesDoug Anderson
I was seeing cases where I was losing interrupts when inserting and removing SD cards. Sometimes the card would get "stuck" in the inserted state. I believe that the problem was related to the code to handle the case where we needed both rising and falling edges. This code would disable the interrupt as the polarity was switched. If an interrupt came at the wrong time it could be lost. We'll match what the gpio-dwapb.c driver does upstream and change the interrupt polarity without disabling things. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14gpio: crystalcove: use handle_nested_irqAaron Lu
The CrystalCove GPIO chip has can_sleep set so its demultiplexed irqs will have IRQ_NESTED_THREAD flag set, thus we should use the nested version handle_nested_irq in CrystalCove's irq handler instead of handle_generic_irq, or the following warning will be hit and the functionality is lost: [ 4089.639554] Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.313 08/13/2014 [ 4089.639564] 00000002 00000000 c24fbdf4 c16e0257 c24fbe38 c24fbe28 c105390c c18ec480 [ 4089.639596] c24fbe54 00000048 c18f8e3b 00000295 c10a60fc 00000295 c10a60fc f4464540 [ 4089.639626] f446459c c278ad40 c24fbe40 c1053974 00000009 c24fbe38 c18ec480 c24fbe54 [ 4089.639656] Call Trace: [ 4089.639685] [<c16e0257>] dump_stack+0x41/0x52 [ 4089.639707] [<c105390c>] warn_slowpath_common+0x8c/0xc0 [ 4089.639727] [<c10a60fc>] ? irq_nested_primary_handler+0x2c/0x30 [ 4089.639744] [<c10a60fc>] ? irq_nested_primary_handler+0x2c/0x30 [ 4089.639763] [<c1053974>] warn_slowpath_fmt+0x34/0x40 [ 4089.639781] [<c10a60fc>] irq_nested_primary_handler+0x2c/0x30 [ 4089.639800] [<c10a5c56>] handle_irq_event_percpu+0x76/0x190 [ 4089.639818] [<c1461570>] ? regmap_format_10_14_write+0x30/0x30 [ 4089.639836] [<c1464f4c>] ? _regmap_bus_raw_write+0x4c/0x70 [ 4089.639854] [<c10a5da1>] handle_irq_event+0x31/0x50 [ 4089.639872] [<c10a83eb>] handle_simple_irq+0x4b/0x70 [ 4089.639889] [<c10a5384>] generic_handle_irq+0x24/0x40 [ 4089.639908] [<c1366d87>] crystalcove_gpio_irq_handler+0xa7/0xc0 [ 4089.639927] [<c10a85a7>] handle_nested_irq+0x77/0x190 [ 4089.639947] [<c1469801>] regmap_irq_thread+0x1b1/0x360 [ 4089.639966] [<c10a6ae8>] irq_thread_fn+0x18/0x30 [ 4089.639983] [<c10a6906>] irq_thread+0xf6/0x110 [ 4089.640001] [<c10a6ad0>] ? irq_finalize_oneshot.part.30+0x1b0/0x1b0 [ 4089.640019] [<c10a6b50>] ? irq_forced_thread_fn+0x50/0x50 [ 4089.640037] [<c10a6810>] ? irq_thread_check_affinity+0xc0/0xc0 [ 4089.640054] [<c106f389>] kthread+0xa9/0xc0 [ 4089.640074] [<c16e6401>] ret_from_kernel_thread+0x21/0x30 [ 4089.640091] [<c106f2e0>] ? kthread_create_on_node+0x110/0x110 [ 4089.640105] ---[ end trace dca7946ad31eba7d ]--- Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=90521 Reported-and-tested-by: Brian Loften <bloften80@gmail.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14cfg80211: docs: remove station_info_flagsJohannes Berg
I removed the enum earlier, but forgot to remove it from the documentation - do that now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14Bluetooth: Remove dead codeGowtham Anandha Babu
Variable 'controller' is assigned a value that is never used. Identified by cppcheck tool. Signed-off-by: Gowtham Anandha Babu <gowtham.ab@samsung.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-14mmc: sdhci: Set SDHCI_POWER_ON with external vmmcTim Kryger
Host controllers lacking the required internal vmmc regulator may still follow the spec with regard to the LSB of SDHCI_POWER_CONTROL. Set the SDHCI_POWER_ON bit when vmmc is enabled to encourage the controller to to drive CMD, DAT, SDCLK. This fixes a regression observed on some Qualcomm and Nvidia boards caused by 5222161 mmc: sdhci: Improve external VDD regulator support. Fixes: 52221610dd84 (mmc: sdhci: Improve external VDD regulator support) Signed-off-by: Tim Kryger <tim.kryger@gmail.com> Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-14nl80211: send netdetect configuration info in NL80211_CMD_GET_WOWLANLuciano Coelho
Send the netdetect configuration information in the response to NL8021_CMD_GET_WOWLAN commands. This includes the scan interval, SSIDs to match and frequencies to scan. Additionally, add the NL80211_WOWLAN_TRIG_NET_DETECT with NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14cfg80211: avoid reg-hints in self-managed only systemsArik Nemtsov
When a system contains only self-managed regulatory devices all hints from the regulatory core are ignored. Stop hint processing early in this case. These systems usually don't have CRDA deployed, which results in endless (irrelevent) logs of the form: cfg80211: Calling CRDA to update world regulatory domain Make sure there's at least one self-managed device before discarding a hint, in order to prevent initial hints from disappearing on CRDA managed systems. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14cfg80211: introduce sync regdom set API for self-managedArik Nemtsov
A self-managed device will sometimes need to set its regdomain synchronously. Notably it should be set before usermode has a chance to query it. Expose a new API to accomplish this which requires the RTNL. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: don't defer scans in case of radar detectionEliad Peller
Radar detection can last indefinite time. There is no point in deferring a scan request in this case - simply return -EBUSY. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: consider only relevant vifs for radar_required calculationEliad Peller
ctx->conf.radar_enabled should reflect whether radar detection is enabled for the channel context. When calculating it, make it consider only the vifs that have this context assigned (instead of all the vifs). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: remove local->radar_detect_enabledEliad Peller
local->radar_detect_enabled should tell whether radar_detect is enabled on any interface belonging to local. However, it's not getting updated correctly in many cases (actually, when testing with hwsim it's never been set, even when the dfs master is beaconing). Instead of handling all the corner cases (e.g. channel switch), simply check whether radar detection is enabled only when needed, instead of caching the result. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: add TDLS supported channels correctlyArik Nemtsov
The function adding the supported channels IE during a TDLS connection had several issues: 1. If the entire subband is usable, the function exitted the loop without adding it 2. The function only checked chandef_usable, ignoring flags like RADAR which would prevent TDLS off-channel communcation. 3. HT20 was explicitly required in the chandef, while not a requirement for TDLS off-channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: let flush() drop packets when possibleEmmanuel Grumbach
When roaming / suspending, it makes no sense to wait until the transmit queues of the device are empty. In extreme condition they can be starved (VO saturating the air), but even in regular cases, it is pointless to delay the roaming because the low level driver is trying to send packets to an AP which is far away. We'd rather drop these packets and let TCP retransmit if needed. This will allow to speed up the roaming. For suspend, the explanation is even more trivial. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14Bluetooth: Use %llu for printing duration details of selftestsMarcel Holtmann
The duration variable for the selftests is unsigned long long and with that use %llu instead of %lld when printing the results. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-14Bluetooth: Move Delete Stored Link Key to 4th phase of initializationMarcel Holtmann
This moves the execution of Delete Stored Link Key command to the hci_init4_req phase. No actual code has been changed. The command is just executed at a later stage of the initialization. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-14Bluetooth: btusb: Add internal recv_event callback for event processingMarcel Holtmann
Some new upcoming drivers need to process HCI events or take extra actions based on them before handing the event to the Bluetooth core for processing. The new recv_event callback allows exactly such an internal behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-14Merge branch 'fixes' of ↵Zhang Rui
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2015-01-14Merge branch 'hip04'David S. Miller
Ding Tianhong says: ==================== add hisilicon hip04 ethernet driver v13: - Fix the problem of alignment parameters for function and checkpatch warming. v12: - According Alex's suggestion, modify the changelog and add MODULE_DEVICE_TABLE for hip04 ethernet. v11: - Add ethtool support for tx coalecse getting and setting, the xmit_more is not supported for this patch, but I think it could work for hip04, will support it later after some tests for performance better. Here are some performance test results by ping and iperf(add tx_coalesce_frames/users), it looks that the performance and latency is more better by tx_coalesce_frames/usecs. - Before: $ ping 192.168.1.1 ... === 192.168.1.1 ping statistics === 24 packets transmitted, 24 received, 0% packet loss, time 22999ms rtt min/avg/max/mdev = 0.180/0.202/0.403/0.043 ms $ iperf -c 192.168.1.1 ... [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 115 MBytes 945 Mbits/sec - After: $ ping 192.168.1.1 ... === 192.168.1.1 ping statistics === 24 packets transmitted, 24 received, 0% packet loss, time 22999ms rtt min/avg/max/mdev = 0.178/0.190/0.380/0.041 ms $ iperf -c 192.168.1.1 ... [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 115 MBytes 965 Mbits/sec v10: - According Arnd's suggestion, remove the skb_orphan and use the hrtimer for the cleanup of the TX queue and add some modification for the hip04 drivers. 1) drop the broken skb_orphan call 2) drop the workqueue 3) batch cleanup based on tx_coalesce_frames/usecs for better throughput 4) use a reasonable default tx timeout (200us, could be shorted based on measurements) with a range timer 5) fix napi poll function return value 6) use a lockless queue for cleanup v9: - There is no tx completion interrupts to free DMAd Tx packets, it means taht we rely on new tx packets arriving to run the destructors of completed packets, which open up space in their sockets's send queues. Sometimes we don't get such new packets causing Tx to stall, a single UDP transmitter is a good example of this situation, so we need a clean up workqueue to reclaims completed packets, the workqueue will only free the last packets which is already stay for several jiffies. Also fix some format cleanups. v8: - Use poll to reclaim xmitted buffer as workaround since no tx done interrupt v7: - Remove select NET_CORE in 0002 v6: - Suggest by Russell: Use netdev_sent_queue & netdev_completed_queue to solve latency issue Also shorten the period of timer, which is used to wakeup the queue since no tx completed interrupt. v5: - no big change, fix typo v4: - Modify accoringly to the suggetion from Arnd, Florian, Eric, David Use of_parse_phandle_with_fixed_args & syscon_node_to_regmap get ppe info Add skb_orphan() and tx_timer for reclaim since no tx_finished interrupt Update timeout, and move of_phy_connect to probe to reuse open/stop v3: - Suggest from Arnd, use syscon & regmap_write/read to replace static void __iomem *ppebase. Modify hisilicon-hip04-net.txt accrordingly to suggestion from Florian and Sergei. v2: - Got many suggestions from Russell, Arnd, Florian, Mark and Sergei Remove memcpy, use dma_map/unmap_single, use dma_alloc_coherent rather than dma_pool, etc. Refer property in ethernet.txt, change ppe description, etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net: hisilicon: new hip04 ethernet driverdingtianhong
Support Hisilicon hip04 ethernet driver, including 100M / 1000M controller. The controller has no tx done interrupt, reclaim xmitted buffer in the poll. v13: Fix the problem of alignment parameters for function and checkpatch warming. v12: According Alex's suggestion, modify the changelog and add MODULE_DEVICE_TABLE for hip04 ethernet. v11: Add ethtool support for tx coalecse getting and setting, the xmit_more is not supported for this patch, but I think it could work for hip04, will support it later after some tests for performance better. Here are some performance test results by ping and iperf(add tx_coalesce_frames/users), it looks that the performance and latency is more better by tx_coalesce_frames/usecs. - Before: $ ping 192.168.1.1 ... === 192.168.1.1 ping statistics === 24 packets transmitted, 24 received, 0% packet loss, time 22999ms rtt min/avg/max/mdev = 0.180/0.202/0.403/0.043 ms $ iperf -c 192.168.1.1 ... [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 115 MBytes 945 Mbits/sec - After: $ ping 192.168.1.1 ... === 192.168.1.1 ping statistics === 24 packets transmitted, 24 received, 0% packet loss, time 22999ms rtt min/avg/max/mdev = 0.178/0.190/0.380/0.041 ms $ iperf -c 192.168.1.1 ... [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 115 MBytes 965 Mbits/sec v10: According David Miller and Arnd Bergmann's suggestion, add some modification for v9 version - drop the workqueue - batch cleanup based on tx_coalesce_frames/usecs for better throughput - use a reasonable default tx timeout (200us, could be shorted based on measurements) with a range timer - fix napi poll function return value - use a lockless queue for cleanup Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net: hisilicon: new hip04 MDIO driverZhangfei Gao
Hisilicon hip04 platform mdio driver Reuse Marvell phy drivers/net/phy/marvell.c Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14Documentation: add Device tree bindings for Hisilicon hip04 ethernetZhangfei Gao
This patch adds the Device Tree bindings for the Hisilicon hip04 Ethernet controller, including 100M / 1000M controller. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14neighbour: fix base_reachable_time(_ms) not effective immediatly when changedJean-Francois Remy
When setting base_reachable_time or base_reachable_time_ms on a specific interface through sysctl or netlink, the reachable_time value is not updated. This means that neighbour entries will continue to be updated using the old value until it is recomputed in neigh_period_work (which recomputes the value every 300*HZ). On systems with HZ equal to 1000 for instance, it means 5mins before the change is effective. This patch changes this behavior by recomputing reachable_time after each set on base_reachable_time or base_reachable_time_ms. The new value will become effective the next time the neighbour's timer is triggered. Changes are made in two places: the netlink code for set and the sysctl handling code. For sysctl, I use a proc_handler. The ipv6 network code does provide its own handler but it already refreshes reachable_time correctly so it's not an issue. Any other user of neighbour which provide its own handlers must refresh reachable_time. Signed-off-by: Jean-Francois Remy <jeff@melix.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net: fec: fix MDIO bus assignement for dual fec SoC'sStefan Agner
On i.MX28, the MDIO bus is shared between the two FEC instances. The driver makes sure that the second FEC uses the MDIO bus of the first FEC. This is done conditionally if FEC_QUIRK_ENET_MAC is set. However, in newer designs, such as Vybrid or i.MX6SX, each FEC MAC has its own MDIO bus. Simply removing the quirk FEC_QUIRK_ENET_MAC is not an option since other logic, triggered by this quirk, is still needed. Furthermore, there are board designs which use the same MDIO bus for both PHY's even though the second bus would be available on the SoC side. Such layout are popular since it saves pins on SoC side. Due to the above quirk, those boards currently do work fine. The boards in the mainline tree with such a layout are: - Freescale Vybrid Tower with TWR-SER2 (vf610-twr.dts) - Freescale i.MX6 SoloX SDB Board (imx6sx-sdb.dts) This patch adds a new quirk FEC_QUIRK_SINGLE_MDIO for i.MX28, which makes sure that the MDIO bus of the first FEC is used in any case. However, the boards above do have a SoC with a MDIO bus for each FEC instance. But the PHY's are not connected in a 1:1 configuration. A proper device tree description is needed to allow the driver to figure out where to find its PHY. This patch fixes that shortcoming by adding a MDIO bus child node to the first FEC instance, along with the two PHY's on that bus, and making use of the phy-handle property to add a reference to the PHY's. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net/macb: improved ethtool statistics supportXander Huff
Currently `ethtool -S` simply returns "no stats available". It would be more useful to see what the various ethtool statistics registers' values are. This change implements get_ethtool_stats, get_strings, and get_sset_count functions to accomplish this. Read all GEM statistics registers and sum them into macb.ethtool_stats. Add the necessary infrastructure to make this accessible via `ethtool -S`. Update gem_update_stats to utilize ethtool_stats. Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net/macb: Adding comments to various #defs to make interpretation easierXander Huff
This change is to help improve at-a-glace knowledge of the purpose of the various Cadence MACB/GEM registers. Comments are more helpful for human readability than short acronyms. Describe various #define varibles Cadence MACB/GEM registers as documented in Xilinix's "Zynq-7000 All Programmable SoC TechnicalReference Manual, v1.9.1 (UG-585)" Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14Merge branch 'xen-netfront-next'David S. Miller
David Vrabel says: ==================== xen-netfront: refactor making Tx requests As netfront as evolved to handle different sorts of skbs the code to fill a Tx requests has been copy and pasted several times. The series refactors this and a few other areas. The first patch is to a Xen header but this can be merged via net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14xen-netfront: refactor making Tx requestsDavid Vrabel
Eliminate all the duplicate code for making Tx requests by consolidating them into a single xennet_make_one_txreq() function. xennet_make_one_txreq() and xennet_make_txreqs() work with pages and offsets so it will be easier to make netfront handle highmem frags in the future. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14xen-netfront: refactor skb slot countingDavid Vrabel
A function to count the number of slots an skb needs is more useful than one that counts the slots needed for only the frags. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14xen: add page_to_mfn()David Vrabel
pfn_to_mfn(page_to_pfn(p)) is a common use case so add a generic helper for it. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14rhashtable: Add MAINTAINERS entryThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14rhashtable: Lower/upper bucket may map to same lock while shrinkingThomas Graf
Each per bucket lock covers a configurable number of buckets. While shrinking, two buckets in the old table contain entries for a single bucket in the new table. We need to lock down both while linking. Check if they are protected by different locks to avoid a recursive lock. Fixes: 97defe1e ("rhashtable: Per bucket locks & deferred expansion/shrinking") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14Merge branch 'leds-fixes-for-3.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED fix from Bryan Wu. * 'leds-fixes-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: netxbig: fix oops at probe time
2015-01-14Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux Pull WRITE_ONCE argument order change from Christian Borntraeger: "As discussed on LKML[1] it was agreed that WRITE_ONCE(x, val) is better than ASSIGN_ONCE(val, x) Lets change that for 3.19 as 3.19 has no user yet, but the first users will hit linux-next soon" [1] http://marc.info/?l=linux-kernel&m=142081181707596 * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux: kernel: Change ASSIGN_ONCE(val, x) to WRITE_ONCE(x, val)
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: sched: fix skb->protocol use in case of accelerated vlan pathJiri Pirko
tc code implicitly considers skb->protocol even in case of accelerated vlan paths and expects vlan protocol type here. However, on rx path, if the vlan header was already stripped, skb->protocol contains value of next header. Similar situation is on tx path. So for skbs that use skb->vlan_tci for tagging, use skb->vlan_proto instead. Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13atm: horizon: Remove some unused functionsRickard Strandqvist
Removes some functions that are not used anywhere: channel_to_vpivci() query_tx_channel_config() rx_disabled_handler() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13atm: lanai: Remove unused functionRickard Strandqvist
Remove the function aal5_spacefor() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13tipc: correctly handle releasing a not fully initialized sockSasha Levin
Commit f2f9800d4955 "tipc: make tipc node table aware of net namespace" has added a dereference of sock->sk before making sure it's not NULL, which makes releasing a tipc socket NULL pointer dereference for sockets that are not fully initialized. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13sunvnet: fix rx packet length check to allow for TSODavid L Stevens
This patch fixes the rx packet length check in the sunvnet driver to allow for a TSO max packet length greater than the LDC channel negotiated MTU. These are negotiated separately and there is no requirement that port->tsolen be less than port->rmtu, but if it isn't, it'll drop packets with rx length errors. Signed-off-by: David L Stevens <david.stevens@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13xen-netfront: use different locks for Rx and Tx statsDavid Vrabel
In netfront the Rx and Tx path are independent and use different locks. The Tx lock is held with hard irqs disabled, but Rx lock is held with only BH disabled. Since both sides use the same stats lock, a deadlock may occur. [ INFO: possible irq lock inversion dependency detected ] 3.16.2 #16 Not tainted --------------------------------------------------------- swapper/0/0 just changed the state of lock: (&(&queue->tx_lock)->rlock){-.....}, at: [<c03adec8>] xennet_tx_interrupt+0x14/0x34 but this lock took another, HARDIRQ-unsafe lock in the past: (&stat->syncp.seq#2){+.-...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&stat->syncp.seq#2); local_irq_disable(); lock(&(&queue->tx_lock)->rlock); lock(&stat->syncp.seq#2); <Interrupt> lock(&(&queue->tx_lock)->rlock); Using separate locks for the Rx and Tx stats fixes this deadlock. Reported-by: Dmitry Piotrovsky <piotrovskydmitry@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13mISDN: avoid arch specific __builtin_return_address callArnd Bergmann
Not all architectures are able to call __builtin_return_address(). On ARM, the mISDN code produces this warning: hardware/mISDN/w6692.c: In function 'w6692_dctrl': hardware/mISDN/w6692.c:1181:75: warning: unsupported argument to '__builtin_return_address' pr_debug("%s: %s dev(%d) open from %p\n", card->name, __func__, ^ hardware/mISDN/mISDNipac.c: In function 'open_dchannel': hardware/mISDN/mISDNipac.c:759:75: warning: unsupported argument to '__builtin_return_address' pr_debug("%s: %s dev(%d) open from %p\n", isac->name, __func__, ^ In a lot of cases, this is relatively easy to work around by passing the value of __builtin_return_address(0) from the callers into the functions that want it. One exception is the indirect 'open' function call in struct isac_hw. While it would be possible to fix this as well, this patch only addresses the other callers properly and lets this one return the direct parent function, which should be good enough. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13infiniband: mlx5: avoid a compile-time warningArnd Bergmann
The return type of find_first_bit() is architecture specific, on ARM it is 'unsigned int', while the asm-generic code used on x86 and a lot of other architectures returns 'unsigned long'. When building the mlx5 driver on ARM, we get a warning about this: infiniband/hw/mlx5/mem.c: In function 'mlx5_ib_cont_pages': infiniband/hw/mlx5/mem.c:84:143: warning: comparison of distinct pointer types lacks a cast m = min(m, find_first_bit(&tmp, sizeof(tmp))); This patch changes the driver to use min_t to make it behave the same way on all architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13mlx5: avoid build warnings on 32-bitArnd Bergmann
The mlx5 driver passes a string pointer in through a 'u64' variable, which on 32-bit machines causes a build warning: drivers/net/ethernet/mellanox/mlx5/core/debugfs.c: In function 'qp_read_field': drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:303:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] The code is in fact safe, so we can shut up the warning by adding extra type casts. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 17:00:08 +0000