summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-09Merge tag 'pm-4.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix several issues in the intel_pstate driver and one issue in the schedutil cpufreq governor, clean up that governor a bit and hook up existing code for disabling cpufreq to a new kernel command line option. Specifics: - Three fixes for intel_pstate problems related to the passive mode (in which it acts as a regular cpufreq scaling driver), two for the handling of global P-state limits and one for the handling of the cpu_frequency tracepoint in that mode (Rafael Wysocki). - Three fixes for the handling of P-state limits in intel_pstate in the active mode (Rafael Wysocki). - Introduction of a new cpufreq.off=1 kernel command line argument that will disable cpufreq entirely if passed to the kernel and is simply hooked up to the existing code used by Xen (Len Brown). - Fix for the schedutil cpufreq governor to prevent it from using stale raw frequency values in configurations with mutiple CPUs sharing one policy object and a cleanup for it reducing its overhead slightly (Viresh Kumar)" * tag 'pm-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy cpufreq: intel_pstate: Fix intel_pstate_verify_policy() cpufreq: intel_pstate: Fix global settings in active mode cpufreq: Add the "cpufreq.off=1" cmdline option cpufreq: schedutil: Pass sg_policy to get_next_freq() cpufreq: schedutil: move cached_raw_freq to struct sugov_policy cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy() cpufreq: intel_pstate: Do not use performance_limits in passive mode
2017-03-09Merge tag 'pci-v4.11-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "PCI fixes: - fix NULL pointer dereference in Exynos driver - fix NULL pointer dereference in ASPM with pre-1.1 PCIe devices - blacklist QLogic ISP2722 to prevent panics while reading VPD" * tag 'pci-v4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ASPM: Always set link->downstream to avoid NULL dereference on remove PCI: Prevent VPD access for QLogic ISP2722 PCI: exynos: Initialize elbi_base even when using PHY framework
2017-03-09Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Sending this a bit sooner than I otherwise would have, as a fix in the merge window had some unfortunate issues and side effects for some folks. This contains: - Fixes from Jan for the bdi registration/unregistration. These have been tested by the various parties reporting issues, and should be solid at this point. - Also from Jan, fix for axonram gendisk registration. - A stable fix for zram from Johannes. - A small series from Ming, fixing up some long standing issues with blk-mq hardware queue kobject initialization and registration. - A fix for sed opal from Jon, fixing a nonsensical range check and some set-but-not-used variables. - A fix from Neil for a long standing deadlock issue for stacking device drivers. With this in place, dm/md don't have to work around the issue anymore, and can be properly fixed up" * 'for-linus' of git://git.kernel.dk/linux-block: axonram: Fix gendisk handling blk: improve order of bio handling in generic_make_request() Revert "scsi, block: fix duplicate bdi name registration crashes" block: Make del_gendisk() safer for disks without queues bdi: Fix use-after-free in wb_congested_put() block: Allow bdi re-registration block/sed: Fix opal user range check and unused variables zram: set physical queue limits to avoid array out of bounds accesses blk-mq: free hctx->cpumask in release handler of hctx's kobject blk-mq: make lifetime consistent between hctx and its kobject blk-mq: make lifetime consitent between q/ctx and its kobject blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()
2017-03-09Merge tag 'media/v4.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Media regression fixes: - serial_ir: fix a Kernel crash during boot on Kernel 4.11-rc1, due to an IRQ code called too early - other IR regression fixes at lirc and at the raw IR decoding - a deadlock fix at the RC nuvoton driver - fix another issue with DMA on stack at dw2102 driver There's an extra patch there that change a driver interface for the SoC VSP1 driver, with is shared between the DRM and V4L2 driver. The patch itself is trivial, and was acked by David Arlie" * tag 'media/v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure [media] dw2102: don't do DMA on stack [media] rc: protocol is not set on register for raw IR devices [media] rc: raw decoder for keymap protocol is not loaded on register [media] rc: nuvoton: fix deadlock in nvt_write_wakeup_codes [media] lirc: fix dead lock between open and wakeup_filter [media] serial_ir: ensure we're ready to receive interrupts
2017-03-09s390: wire up statx system callHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-09drm/amdgpu: bump driver version for some new featuresAlex Deucher
We added new gem ioctl flags and the new fences ioctl, but forgot to bump the version. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-09drm/amdgpu: validate paramaters in the gem ioctlAlex Deucher
Reject it if there are any invalid flags or domains. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-09Merge branch 'bpf-htab-fixes'David S. Miller
Alexei Starovoitov says: ==================== bpf: htab fixes Two bpf hashtable fixes. See individual patches for details. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09bpf: convert htab map to hlist_nullsAlexei Starovoitov
when all map elements are pre-allocated one cpu can delete and reuse htab_elem while another cpu is still walking the hlist. In such case the lookup may miss the element. Convert hlist to hlist_nulls to avoid such scenario. When bucket lock is taken there is no need to take such precautions, so only convert map_lookup and map_get_next to nulls. The race window is extremely small and only reproducible with explicit udelay() inside lookup_nulls_elem_raw() Similar to hlist add hlist_nulls_for_each_entry_safe() and hlist_nulls_entry_safe() helpers. Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Reported-by: Jonathan Perry <jonperry@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09bpf: fix struct htab_elem layoutAlexei Starovoitov
when htab_elem is removed from the bucket list the htab_elem.hash_node.next field should not be overridden too early otherwise we have a tiny race window between lookup and delete. The bug was discovered by manual code analysis and reproducible only with explicit udelay() in lookup_elem_raw(). Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Reported-by: Jonathan Perry <jonperry@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09uapi: fix linux/packet_diag.h userspace compilation errorDmitry V. Levin
Replace MAX_ADDR_LEN with its numeric value to fix the following linux/packet_diag.h userspace compilation error: /usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function) __u8 pdmc_addr[MAX_ADDR_LEN]; This is not the first case in the UAPI where the numeric value of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h already does the same: $ grep MAX_ADDR_LEN include/uapi/linux/if_link.h __u8 mac[32]; /* MAX_ADDR_LEN */ There are no UAPI headers besides these two that use MAX_ADDR_LEN. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net/tunnel: set inner protocol in network gro hooksPaolo Abeni
The gso code of several tunnels type (gre and udp tunnels) takes for granted that the skb->inner_protocol is properly initialized and drops the packet elsewhere. On the forwarding path no one is initializing such field, so gro encapsulated packets are dropped on forward. Since commit 38720352412a ("gre: Use inner_proto to obtain inner header protocol"), this can be reproduced when the encapsulated packets use gre as the tunneling protocol. The issue happens also with vxlan and geneve tunnels since commit 8bce6d7d0d1e ("udp: Generalize skb_udp_segment"), if the forwarding host's ingress nic has h/w offload for such tunnel and a vxlan/geneve device is configured on top of it, regardless of the configured peer address and vni. To address the issue, this change initialize the inner_protocol field for encapsulated packets in both ipv4 and ipv6 gro complete callbacks. Fixes: 38720352412a ("gre: Use inner_proto to obtain inner header protocol") Fixes: 8bce6d7d0d1e ("udp: Generalize skb_udp_segment") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09qed: Fix copy of uninitialized memoryrobert.foss@collabora.com
In qed_ll2_start_ooo() the ll2_info variable is uninitialized and then passed to qed_ll2_acquire_connection() where it is copied into a new memory space. This shouldn't cause any issue as long as non of the copied memory is every read. But the potential for a bug being introduced by reading this memory is real. Detected by CoverityScan, CID#1399632 ("Uninitialized scalar variable") Signed-off-by: Robert Foss <robert.foss@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09Merge branch 'thunderx-misc-fixes'David S. Miller
Sunil Goutham says: ==================== net: thunderx: Miscellaneous fixes This patch set fixes multiple issues such as IOMMU translation faults when kernel is booted with IOMMU enabled on host, incorrect MAC ID reading from ACPI tables and IPv6 UDP packet drop due to failure of checksum validation. Changes from v1: - As suggested by David Miller, got rid of conditional calling of DMA map/unmap APIs. Also updated commit message in 'IOMMU translation faults' patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: thunderx: Allow IPv6 frames with zero UDP checksumThanneeru Srinivasulu
Do not consider IPv6 frames with zero UDP checksum as frames with bad checksum and drop them. Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: thunderx: Fix invalid mac addresses for node1 interfacesSunil Goutham
When booted with ACPI, random mac addresses are being assigned to node1 interfaces due to mismatch of bgx_id in BGX driver and ACPI tables. This patch fixes this issue by setting maximum BGX devices per node based on platform/soc instead of a macro. This change will set the bgx_id appropriately. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: thunderx: Fix LMAC mode debug prints for QSGMII modeSunil Goutham
When BGX/LMACs are in QSGMII mode, for some LMACs, mode info is not being printed. This patch will fix that. With changes already done to not do any sort of serdes 2 lane mapping config calculation in kernel driver, we can get rid of this logic. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: thunderx: Fix IOMMU translation faultsSunil Goutham
ACPI support has been added to ARM IOMMU driver in 4.10 kernel and that has resulted in VNIC interfaces throwing translation faults when kernel is booted with ACPI as driver was not using DMA API. This patch fixes the issue by using DMA API which inturn will create translation tables when IOMMU is enabled. Also VNIC doesn't have a seperate receive buffer ring per receive queue, so there is no 1:1 descriptor index matching between CQE_RX and the index in buffer ring from where a buffer has been used for DMA'ing. Unlike other NICs, here it's not possible to maintain dma address to virt address mappings within the driver. This leaves us no other choice but to use IOMMU's IOVA address conversion API to get buffer's virtual address which can be given to network stack for processing. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09rds: ib: add error handleZhu Yanjun
In the function rds_ib_setup_qp, the error handle is missing. When some error occurs, it is possible that memory leak occurs. As such, error handle is added. Cc: Joe Jin <joe.jin@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Guanglei Li <guanglei.li@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09liquidio: improve UDP TX performanceVSR Burru
Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: ipv6: Remove redundant RTA_OIF in multipath routesDavid Ahern
Dinesh reported that RTA_MULTIPATH nexthops are 8-bytes larger with IPv6 than IPv4. The recent refactoring for multipath support in netlink messages does discriminate between non-multipath which needs the OIF and multipath which adds a rtnexthop struct for each hop making the RTA_OIF attribute redundant. Resolve by adding a flag to the info function to skip the oif for multipath. Fixes: beb1afac518d ("net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attribute") Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09Merge tag 'for-linus-4.11-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix and cleanup from Juergen Gross: "This contains one fix for MSIX handling under Xen and a trivial cleanup patch" * tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xenbus: Remove duplicate inclusion of linux/init.h xen: do not re-use pirq number cached in pci device msi msg data
2017-03-09mm: introduce __p4d_alloc()Kirill A. Shutemov
For full 5-level paging we need a helper to allocate p4d page table. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09mm: convert generic code to 5-level pagingKirill A. Shutemov
Convert all non-architecture-specific code to 5-level paging. It's mostly mechanical adding handling one more page table level in places where we deal with pud_t. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09asm-generic: introduce <asm-generic/pgtable-nop4d.h>Kirill A. Shutemov
Like with pgtable-nopud.h for 4-level paging, this new header is base for converting an architectures to properly folded p4d_t level. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09arch, mm: convert all architectures to use 5level-fixup.hKirill A. Shutemov
If an architecture uses 4level-fixup.h we don't need to do anything as it includes 5level-fixup.h. If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK before inclusion of the header. It makes asm-generic code to use 5level-fixup.h. If an architecture has 4-level paging or folds levels on its own, include 5level-fixup.h directly. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09asm-generic: introduce __ARCH_USE_5LEVEL_HACKKirill A. Shutemov
We are going to introduce <asm-generic/pgtable-nop4d.h> to provide abstraction for properly (in opposite to 5level-fixup.h hack) folded p4d level. The new header will be included from pgtable-nopud.h. If an architecture uses <asm-generic/nop*d.h>, we cannot use 5level-fixup.h directly to quickly convert the architecture to 5-level paging as it would conflict with pgtable-nop4d.h. With this patch an architecture can define __ARCH_USE_5LEVEL_HACK before inclusion <asm-genenric/nop*d.h> to use 5level-fixup.h. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09asm-generic: introduce 5level-fixup.hKirill A. Shutemov
We are going to switch core MM to 5-level paging abstraction. This is preparation step which adds <asm-generic/5level-fixup.h> As with 4level-fixup.h, the new header allows quickly make all architectures compatible with 5-level paging in core MM. In long run we would like to switch architectures to properly folded p4d level by using <asm-generic/pgtable-nop4d.h>, but it requires more changes to arch-specific code. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09x86/cpufeature: Add 5-level paging detectionKirill A. Shutemov
Look for 'la57' in /proc/cpuinfo to see if your machine supports 5-level paging. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09md/raid1/10: fix potential deadlockShaohua Li
Neil Brown pointed out a potential deadlock in raid 10 code with bio_split/chain. The raid1 code could have the same issue, but recent barrier rework makes it less likely to happen. The deadlock happens in below sequence: 1. generic_make_request(bio), this will set current->bio_list 2. raid10_make_request will split bio to bio1 and bio2 3. __make_request(bio1), wait_barrer, add underlayer disk bio to current->bio_list 4. __make_request(bio2), wait_barrer If raise_barrier happens between 3 & 4, since wait_barrier runs at 3, raise_barrier waits for IO completion from 3. And since raise_barrier sets barrier, 4 waits for raise_barrier. But IO from 3 can't be dispatched because raid10_make_request() doesn't finished yet. The solution is to adjust the IO ordering. Quotes from Neil: " It is much safer to: if (need to split) { split = bio_split(bio, ...) bio_chain(...) make_request_fn(split); generic_make_request(bio); } else make_request_fn(mddev, bio); This way we first process the initial section of the bio (in 'split') which will queue some requests to the underlying devices. These requests will be queued in generic_make_request. Then we queue the remainder of the bio, which will be added to the end of the generic_make_request queue. Then we return. generic_make_request() will pop the lower-level device requests off the queue and handle them first. Then it will process the remainder of the original bio once the first section has been fully processed. " Note, this only happens in read path. In write path, the bio is flushed to underlaying disks either by blk flush (from schedule) or offladed to raid1/10d. It's queued in current->bio_list. Cc: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org (v3.14+, only the raid10 part) Suggested-by: NeilBrown <neilb@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md: don't impose the MD_SB_DISKS limit on arrays without metadata.NeilBrown
These arrays, created with "mdadm --build" don't benefit from a limit. The default will be used, which is '0' and is interpreted as "don't impose a limit". Reported-by: ian_bruce@mail.ru Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md: move funcs from pers->resize to update_sizeGuoqing Jiang
raid1_resize and raid5_resize should also check the mddev->queue if run underneath dm-raid. And both set_capacity and revalidate_disk are used in pers->resize such as raid1, raid10 and raid5. So move them from personality file to common code. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md-cluster: remove useless memset from gather_all_resync_infoGuoqing Jiang
This memset is not needed. The lvb is already zeroed because it was recently allocated by lockres_init, which uses kzalloc(), and read_resync_info() doesn't need it to be zero anyway. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md-cluster: free md_cluster_info if node leave clusterGuoqing Jiang
To avoid memory leak, we need to free the cinfo which is allocated when node join cluster. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md: delete dead codeShaohua Li
Nobody is using mddev_check_plugged(), so delete the dead code Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md/raid10: submit bio directly to replacement diskShaohua Li
Commit 57c67df(md/raid10: submit IO from originating thread instead of md thread) submits bio directly for normal disks but not for replacement disks. There is no point we shouldn't do this for replacement disks. Cc: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllersGuenter Roeck
Upstream commit 98d74f9ceaef ("xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI xhci controllers which can result in excessive timeouts, to the point where the system reports a deadlock. The same problem is seen with hot pluggable xhci controllers using the xhci-plat driver, such as the driver used for Type-C ports on rk3399. Similar to hot-pluggable PCI controllers, the driver for this chip removes the xhci controller from the system when the Type-C cable is disconnected. The solution for PCI devices works just as well for non-PCI devices and avoids the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: host: xhci-dbg: HCIVERSION should be a binary numberPeter Chen
According to xHCI spec, HCIVERSION containing a BCD encoding of the xHCI specification revision number, 0100h corresponds to xHCI version 1.0. Change "100" as "0x100". Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable <stable@vger.kernel.org> Fixes: 04abb6de2825 ("xhci: Read and parse new xhci 1.1 capability register") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: xhci: remove dummy extra_priv_size for size of xhci_hcd structChunfeng Yun
because hcd_priv_size is already size of xhci_hcd struct, extra_priv_size is not needed anymore for MTK and tegra drivers. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: xhci-mtk: check hcc_params after adding primary hcdChunfeng Yun
hcc_params is set in xhci_gen_setup() called from usb_add_hcd(), so checks the Maximum Primary Stream Array Size in the hcc_params register after adding primary hcd. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09ahci: qoriq: correct the sata ecc setting errorYuantian Tang
Sata ecc is controlled by only 1 bit which is 24bit in big-endian in ecc register. So only setting 24bit to disable sata ecc prevents other bits from being overwritten in ecc register. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-03-09Revert "i2c: copy device properties when using i2c_register_board_info()"Wolfram Sang
This reverts commit b0c1e95ab44feaad8831f2c06a3473c974003b49. It contains a flaw and the next version has more features added which makes me want to move it to the next cycle. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-09Merge branch 'i2c-mux/for-current' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-current
2017-03-09Revert "i2c: add missing of_node_put in i2c_mux_del_adapters"Wolfram Sang
This reverts commit 02dbfa5e5583523035f05636c614a0eca77f1aab. I grabbed the wrong version from the list and will pull the proper one from Peter Rosin's mux tree. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-09i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not setJavier Martinez Canillas
After commit 7999eecb7e56 ("i2c: exynos5: fix arbitration lost handling"), some I2C transactions are failing because the TRANSFER_DONE_AUTO field is not set in the I2C_TRANS_STATUS register so the i2c->status value is left to -EINVAL causing the i2c->msg_complete completion to never be signaled. For example, when reading the time of an I2C rtc on an Exynos5800 machine: $ cat /sys/class/rtc/rtc0/time [ 25.924594] exynos5-hsi2c 12e10000.i2c: rx timeout [ 65.028365] max77686-rtc max77802-rtc: Fail to read time reg(-22) cat: /sys/class/rtc/rtc0/time: Invalid argument The Exynos5422 manual states clearly that most I2C_TRANS_STATUS reg bits (including TRANSFER_DONE_AUTO) are cleared after the register is read. So reading has side effects and should only be done if HSI2C_INT_I2C was set. Fixes: 7999eecb7e56 ("i2c: exynos5: fix arbitration lost handling") Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-09Merge tag 'kvm-arm-for-4.11-rc2' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM updates for v4.11-rc2 vgic updates: - Honour disabling the ITS - Don't deadlock when deactivating own interrupts via MMIO - Correctly expose the lact of IRQ/FIQ bypass on GICv3 I/O virtualization: - Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many PCIe devices General bug fixes: - Gracefully handle exception generated with syndroms that the host doesn't understand - Properly invalidate TLBs on VHE systems
2017-03-09KVM: nVMX: do not warn when MSR bitmap address is not backedRadim Krčmář
Before trying to do nested_get_page() in nested_vmx_merge_msr_bitmap(), we have already checked that the MSR bitmap address is valid (4k aligned and within physical limits). SDM doesn't specify what happens if the there is no memory mapped at the valid address, but Intel CPUs treat the situation as if the bitmap was configured to trap all MSRs. KVM already does that by returning false and a correct handling doesn't need the guest-trigerrable warning that was reported by syzkaller: (The warning was originally there to catch some possible bugs in nVMX.) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 7832 Comm: syz-executor1 Not tainted 4.10.0+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 enter_vmx_non_root_mode arch/x86/kvm/vmx.c:10471 [inline] nested_vmx_run+0x6186/0xaab0 arch/x86/kvm/vmx.c:10561 handle_vmlaunch+0x1a/0x20 arch/x86/kvm/vmx.c:7312 vmx_handle_exit+0xfc0/0x3f00 arch/x86/kvm/vmx.c:8526 vcpu_enter_guest arch/x86/kvm/x86.c:6982 [inline] vcpu_run arch/x86/kvm/x86.c:7044 [inline] kvm_arch_vcpu_ioctl_run+0x1418/0x4840 arch/x86/kvm/x86.c:7205 kvm_vcpu_ioctl+0x673/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2570 Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> [Jim Mattson explained the bare metal behavior: "I believe this behavior would be documented in the chipset data sheet rather than the SDM, since the chipset returns all 1s for an unclaimed read."] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-09Merge branch 'pm-cpufreq-sched'Rafael J. Wysocki
* pm-cpufreq-sched: cpufreq: schedutil: Pass sg_policy to get_next_freq() cpufreq: schedutil: move cached_raw_freq to struct sugov_policy
2017-03-09Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy cpufreq: intel_pstate: Fix intel_pstate_verify_policy() cpufreq: intel_pstate: Fix global settings in active mode cpufreq: Add the "cpufreq.off=1" cmdline option cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy() cpufreq: intel_pstate: Do not use performance_limits in passive mode
2017-03-09Merge tag 'irq-fixes-4.11-rc2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip/irqdomain updates for 4.11-rc2 from Marc Zyngier - irqchip/crossbar: Some type tidying up - irqchip/gicv3-its: Workaround for a Qualcomm erratum - irqdomain: Compile for for systems that don't use CONFIG_IRQ_DOMAIN Fixed up minor conflict in the crossbar driver.
generated by cgit (git 2.34.1) at 2025-09-12 18:29:58 +0000