| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This is the first batch with fixes and some nice performance
improvements.
Preliminary results show eg. more files/sec in fsmark, better perf on
multi-threaded workloads (filebench, dbench), fewer context switches
and overall better memory allocation characteristics (multiple
benchmarks).
Apart from general performance, there's an improvement for qgroups +
balance workload that's been troubling our users.
Note for stable: there are 20+ patches tagged for stable, out of 90.
Not all of them apply cleanly on all stable versions but the conflicts
are mostly due to simple cleanups and resolving should be obvious. The
fixes are otherwise independent.
Performance improvements:
- transition between blocking and spinning modes of path is gone,
which originally resulted to more unnecessary wakeups and updates
to the path locks, the effects are measurable and improve latency
and scalability
- qgroups: first batch of changes that should speedup balancing with
qgroups on, skip quota accounting on unchanged subtrees, overall
gain is about 30+% in runtime
- use rb-tree with cached first node for several structures, small
improvement to avoid pointer chasing
Fixes:
- trim
- fix: some blockgroups could have been missed if their logical
address was past the total filesystem size (ie. after a lot of
balancing)
- better error reporting, after processing blockgroups and whole
device
- fix: continue trimming block groups after an error is
encountered
- check for trim support of the device earlier and avoid some
unnecessary work
- less interaction with transaction commit that improves latency
on slower storage (eg. image files over NFS)
- fsync
- fix warning when replaying log after fsync of a O_TMPFILE
- fix wrong dentries after fsync of file that got its parent
replaced
- qgroups: fix rescan that might misc some dirty groups
- don't clean dirty pages during buffered writes, this could lead to
lost updates in some corner cases
- some block groups could have been delayed in creation, if the
allocation triggered another one
- error handling improvements
Cleanups:
- removed unused struct members and variables
- function return type cleanups
- delayed refs code refactoring
- protect against deadlock that could be caused by crafted image that
tries to allocate from a tree that's locked already"
* tag 'for-4.20-part1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (93 commits)
btrfs: switch return_bigger to bool in find_ref_head
btrfs: remove fs_info from btrfs_should_throttle_delayed_refs
btrfs: remove fs_info from btrfs_check_space_for_delayed_refs
btrfs: delayed-ref: pass delayed_refs directly to btrfs_delayed_ref_lock
btrfs: delayed-ref: pass delayed_refs directly to btrfs_select_ref_head
btrfs: qgroup: move the qgroup->members check out from (!qgroup)'s else branch
btrfs: relocation: Remove redundant tree level check
btrfs: relocation: Cleanup while loop using rbtree_postorder_for_each_entry_safe
btrfs: qgroup: Avoid calling qgroup functions if qgroup is not enabled
Btrfs: fix wrong dentries after fsync of file that got its parent replaced
Btrfs: fix warning when replaying log after fsync of a tmpfile
btrfs: drop min_size from evict_refill_and_join
btrfs: assert on non-empty delayed iputs
btrfs: make sure we create all new block groups
btrfs: reset max_extent_size on clear in a bitmap
btrfs: protect space cache inode alloc with GFP_NOFS
btrfs: release metadata before running delayed refs
Btrfs: kill btrfs_clear_path_blocking
btrfs: dev-replace: remove pointless assert in write unlock
btrfs: dev-replace: move replace members out of fs_info
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull tty ioctl updates from Al Viro:
"This is the compat_ioctl work related to tty ioctls.
Quite a bit of dead code taken out, all tty-related stuff gone from
fs/compat_ioctl.c. A bunch of compat bugs fixed - some still remain,
but all more or less generic tty-related ioctls should be covered
(remaining issues are in things like driver-private ioctls in a pcmcia
serial card driver not getting properly handled in 32bit processes on
64bit host, etc)"
* 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (53 commits)
kill TIOCSERGSTRUCT
change semantics of ldisc ->compat_ioctl()
kill TIOCSER[SG]WILD
synclink_gt(): fix compat_ioctl()
pty: fix compat ioctls
compat_ioctl - kill keyboard ioctl handling
gigaset: add ->compat_ioctl()
vt_compat_ioctl(): clean up, use compat_ptr() properly
gigaset: don't try to printk userland buffer contents
dgnc: don't bother with (empty) stub for TCXONC
dgnc: leave TIOC[GS]SOFTCAR to ldisc
remove fallback to drivers for TIOCGICOUNT
dgnc: break-related ioctls won't reach ->ioctl()
kill the rest of tty COMPAT_IOCTL() entries
dgnc: TIOCM... won't reach ->ioctl()
isdn_tty: TCSBRK{,P} won't reach ->ioctl()
kill capinc_tty_ioctl()
take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()
synclink: reduce pointless checks in ->ioctl()
complete ->[sg]et_serial() switchover
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"pstore improvements:
- refactor init to happen as early as possible again (Joel Fernandes)
- improve resource reservation names"
* tag 'pstore-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ram: Clarify resource reservation labels
pstore: Refactor compression initialization
pstore: Allocate compression during late_initcall()
pstore: Centralize init/exit routines
|
|
Update version reported in "modinfo cifs"
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We have hit this intermittently, increase the verbosity of
warning message on unexpected mid cancellation.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Change these free functions to allow passing NULL as the argument and
treat it as a no-op just like free(NULL) would.
Or, if rqst->rq_iov is NULL.
The second scenario could happen for smb2_queryfs() if the call
to SMB2_query_info_init() fails and we go to qfs_exit to clean up
and free all resources.
In that case we have not yet assigned rqst[2].rq_iov and thus
the rq_iov dereference in SMB2_close_free() will cause a NULL pointer
dereference.
Fixes: 1eb9fb52040f ("cifs: create SMB2_open_init()/SMB2_open_free() helpers")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"In this patchset, there are a couple of minor updates, as well as some
reworking of the LSM initialization code from Kees Cook (these prepare
the way for ordered stackable LSMs, but are a valuable cleanup on
their own)"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: Don't ignore initialization failures
LSM: Provide init debugging infrastructure
LSM: Record LSM name in struct lsm_info
LSM: Convert security_initcall() into DEFINE_LSM()
vmlinux.lds.h: Move LSM_TABLE into INIT_DATA
LSM: Convert from initcall to struct lsm_info
LSM: Remove initcall tracing
LSM: Rename .security_initcall section to .lsm_info
vmlinux.lds.h: Avoid copy/paste of security_init section
LSM: Correctly announce start of LSM initialization
security: fix LSM description location
keys: Fix the use of the C++ keyword "private" in uapi/linux/keyctl.h
seccomp: remove unnecessary unlikely()
security: tomoyo: Fix obsolete function
security/capabilities: remove check for -EINVAL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
"Three SELinux patches for v4.20, all fall under the bug-fix or
behave-better category, which is good. All three have pretty good
descriptions too, which is even better"
* tag 'selinux-pr-20181022' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: Add __GFP_NOWARN to allocation at str_read()
selinux: refactor mls_context_to_sid() and make it stricter
selinux: fix mounting of cgroup2 under older policies
|
|
The spec only requires the posted interrupt descriptor address to be
64-bytes aligned (i.e. bits[0:5] == 0). Using page_address_valid also
forces the address to be page aligned.
Only validate that the address does not cross the maximum physical address
without enforcing a page alignment.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Fixes: 6de84e581c0 ("nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2")
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Krish Sadhuhan <krish.sadhukhan@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
"I have been slowly sorting out siginfo and this is the culmination of
that work.
The primary result is in several ways the signal infrastructure has
been made less error prone. The code has been updated so that manually
specifying SEND_SIG_FORCED is never necessary. The conversion to the
new siginfo sending functions is now complete, which makes it
difficult to send a signal without filling in the proper siginfo
fields.
At the tail end of the patchset comes the optimization of decreasing
the size of struct siginfo in the kernel from 128 bytes to about 48
bytes on 64bit. The fundamental observation that enables this is by
definition none of the known ways to use struct siginfo uses the extra
bytes.
This comes at the cost of a small user space observable difference.
For the rare case of siginfo being injected into the kernel only what
can be copied into kernel_siginfo is delivered to the destination, the
rest of the bytes are set to 0. For cases where the signal and the
si_code are known this is safe, because we know those bytes are not
used. For cases where the signal and si_code combination is unknown
the bits that won't fit into struct kernel_siginfo are tested to
verify they are zero, and the send fails if they are not.
I made an extensive search through userspace code and I could not find
anything that would break because of the above change. If it turns out
I did break something it will take just the revert of a single change
to restore kernel_siginfo to the same size as userspace siginfo.
Testing did reveal dependencies on preferring the signo passed to
sigqueueinfo over si->signo, so bit the bullet and added the
complexity necessary to handle that case.
Testing also revealed bad things can happen if a negative signal
number is passed into the system calls. Something no sane application
will do but something a malicious program or a fuzzer might do. So I
have fixed the code that performs the bounds checks to ensure negative
signal numbers are handled"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
signal: Guard against negative signal numbers in copy_siginfo_from_user32
signal: Guard against negative signal numbers in copy_siginfo_from_user
signal: In sigqueueinfo prefer sig not si_signo
signal: Use a smaller struct siginfo in the kernel
signal: Distinguish between kernel_siginfo and siginfo
signal: Introduce copy_siginfo_from_user and use it's return value
signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
signal: Fail sigqueueinfo if si_signo != sig
signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
signal/unicore32: Use force_sig_fault where appropriate
signal/unicore32: Generate siginfo in ucs32_notify_die
signal/unicore32: Use send_sig_fault where appropriate
signal/arc: Use force_sig_fault where appropriate
signal/arc: Push siginfo generation into unhandled_exception
signal/ia64: Use force_sig_fault where appropriate
signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
signal/ia64: Use the generic force_sigsegv in setup_frame
signal/arm/kvm: Use send_sig_mceerr
signal/arm: Use send_sig_fault where appropriate
signal/arm: Use force_sig_fault where appropriate
...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The networking merge brought in the experimental support for the
Qualcomm ath10k system NOC, which selects QCOM_QMI_HELPERS as a
dependency.
But the ATH10K_SNOC option (which selects QCOM_QMI_HELPERS) depends on
ARCH_QCOM || COMPILE_TEST in order to get wider build testing than just
the unusual QCOM architecture build, while the QCOM_QMI_HELPERS option
doesn't have that COMPILE_TEST option and is limited to only ARCH_QCOM.
As a result, a "make allmodconfig" complains
WARNING: unmet direct dependencies detected for QCOM_QMI_HELPERS
Depends on [n]: ARCH_QCOM && NET [=y]
Selected by [m]:
- ATH10K_SNOC [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && ATH10K [=m] && (ARCH_QCOM || COMPILE_TEST [=y])
Fix the config-time warning by making QCOM_QMI_HELPERS available when
COMPILE_TEST, since the result seems to build fine.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Govind Singh <govinds@codeaurora.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking updates from David Miller:
1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson.
2) Add zero-copy AF_XDP support to i40e, from Björn Töpel.
3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we
can get rid of the {g,s}et_settings ethtool callbacks, from Michal
Kubecek.
4) Add software timestamping to veth driver, from Michael Walle.
5) More work to make packet classifiers and actions lockless, from Vlad
Buslov.
6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov.
7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks.
8) Support batching of XDP buffers in vhost_net, from Jason Wang.
9) Add flow dissector BPF hook, from Petar Penkov.
10) i40e vf --> generic iavf conversion, from Jesse Brandeburg.
11) Add NLA_REJECT netlink attribute policy type, to signal when users
provide attributes in situations which don't make sense. From
Johannes Berg.
12) Switch TCP and fair-queue scheduler over to earliest departure time
model. From Eric Dumazet.
13) Improve guest receive performance by doing rx busy polling in tx
path of vhost networking driver, from Tonghao Zhang.
14) Add per-cgroup local storage to bpf
15) Add reference tracking to BPF, from Joe Stringer. The verifier can
now make sure that references taken to objects are properly released
by the program.
16) Support in-place encryption in TLS, from Vakul Garg.
17) Add new taprio packet scheduler, from Vinicius Costa Gomes.
18) Lots of selftests additions, too numerous to mention one by one here
but all of which are very much appreciated.
19) Support offloading of eBPF programs containing BPF to BPF calls in
nfp driver, frm Quentin Monnet.
20) Move dpaa2_ptp driver out of staging, from Yangbo Lu.
21) Lots of u32 classifier cleanups and simplifications, from Al Viro.
22) Add new strict versions of netlink message parsers, and enable them
for some situations. From David Ahern.
23) Evict neighbour entries on carrier down, also from David Ahern.
24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann
and John Fastabend.
25) Add support for filtering route dumps, from David Ahern.
26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al.
27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido
Schimmel.
28) Add queue and stack map types to eBPF, from Mauricio Vasquez B.
29) Add back byte-queue-limit support to r8169, with all the bug fixes
in other areas of the driver it works now! From Florian Westphal and
Heiner Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits)
tcp: add tcp_reset_xmit_timer() helper
qed: Fix static checker warning
Revert "be2net: remove desc field from be_eq_obj"
Revert "net: simplify sock_poll_wait"
net: socionext: Reset tx queue in ndo_stop
net: socionext: Add dummy PHY register read in phy_write()
net: socionext: Stop PHY before resetting netsec
net: stmmac: Set OWN bit for jumbo frames
arm64: dts: stratix10: Support Ethernet Jumbo frame
tls: Add maintainers
net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes
octeontx2-af: Support for setting MAC address
octeontx2-af: Support for changing RSS algorithm
octeontx2-af: NIX Rx flowkey configuration for RSS
octeontx2-af: Install ucast and bcast pkt forwarding rules
octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response
octeontx2-af: NPC MCAM and LDATA extract minimal configuration
octeontx2-af: Enable packet length and csum validation
octeontx2-af: Support for VTAG strip and capture
...
|
|
Pull sparc updates from David Miller:
"Mostly VDSO cleanups and optimizations"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: Several small VDSO vclock_gettime.c improvements.
sparc: Validate VDSO for undefined symbols.
sparc: Really use linker with LDFLAGS.
sparc: Improve VDSO CFLAGS.
sparc: Set DISABLE_BRANCH_PROFILING in VDSO CFLAGS.
sparc: Don't bother masking out TICK_PRIV_BIT in VDSO code.
sparc: Inline VDSO gettime code aggressively.
sparc: Improve VDSO instruction patching.
sparc: Fix parport build warnings.
|
|
With EDT model, SRTT no longer is inflated by pacing delays.
This means that RTO and some other xmit timers might be setup
incorrectly. This is particularly visible with either :
- Very small enforced pacing rates (SO_MAX_PACING_RATE)
- Reduced rto (from the default 200 ms)
This can lead to TCP flows aborts in the worst case,
or spurious retransmits in other cases.
For example, this session gets far more throughput
than the requested 80kbit :
$ netperf -H 127.0.0.2 -l 100 -- -q 10000
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.2 () port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
540000 262144 262144 104.00 2.66
With the fix :
$ netperf -H 127.0.0.2 -l 100 -- -q 10000
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.2 () port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
540000 262144 262144 104.00 0.12
EDT allows for better control of rtx timers, since TCP has
a better idea of the earliest departure time of each skb
in the rtx queue. We only have to eventually add to the
timer the difference of the EDT time with current time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the output of /proc/fs/cifs/DebugData a little easier to
read by cleaning up the listing of network interfaces removing
a wasted line break.
Here is a comparison of the network interface information
that from be viewed at the end of output from
"cat /proc/fs/cifs/DebugData"
Before:
Server interfaces: 8
0)
Speed: 10000000000 bps
Capabilities: rss
IPv6: fe80:0000:0000:0000:2cf5:407e:84b0:21dd
1)
Speed: 1000000000 bps
Capabilities:
IPv6: fe80:0000:0000:0000:61cd:6147:3d0c:f484
vs. after:
Server interfaces: 11
0) Speed: 10000000000 bps
Capabilities: rss
IPv6: fe80:0000:0000:0000:2cf5:407e:84b0:21dd
1) Speed: 2000000000 bps
Capabilities:
IPv6: fe80:0000:0000:0000:3d76:2d05:dcf8:ed10
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
To allow better debugging (for example applications with
handle leaks, or complex reconnect scenarios) display the
number of open files (on the client) and number of open
server file handles for each tcon in /proc/fs/cifs/Stats.
Note that open files on server is one larger than local
due to handle caching (in this case of the root of
the share). In this example there are two local
open files, and three (two file and one directory handle)
open on the server.
Sample output:
$ cat /proc/fs/cifs/Stats
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 36 maximum at one time: 2
1) \\localhost\test
SMBs: 69
Bytes read: 27 Bytes written: 0
Open files: 2 total (local), 3 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
Creates: 19 total 0 failed
Closes: 16 total 0 failed
...
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We do not call cifs_open_file() for directories and thus we do not have a
pSMBFile we can extract the FIDs from.
Solve this by instead always using a compounded open/query/close for
the passthrough ioctl.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In cases where queryinfo fails, we have cases in cifs (vers=1.0)
where with backupuid mounts we retry the query info with findfirst.
This doesn't work to some NetApp servers which don't support
WindowsXP (and later) infolevel 261 (SMB_FIND_FILE_ID_FULL_DIR_INFO)
so in this case use other info levels (in this case it will usually
be level 257, SMB_FIND_FILE_DIRECTORY_INFO).
(Also fixes some indentation)
See kernel bugzilla 201435
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If backupuid mount option is sent, we can incorrectly retry
(on access denied on query info) with a cifs (FindFirst) operation
on an smb3 mount which causes the server to force the session close.
We set backup intent on open so no need for this fallback.
See kernel bugzilla 201435
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
When mounting with backupuid set, we should be setting
CREATE_OPEN_BACKUP_INTENT flag on compounded opens as well,
especially the case of compounded smb2_query_path_info.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
writepages and readpages operations did not call get/free_xid
so the statistics for file copy could get confusing with "vfs operations"
not increasing. Add get_xid and free_xid to cifs readpages and
writepages functions.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
There is a potential execution path in which variable *resp_buftype*
is passed as an argument to function free_rsp_buf(), in which it is
used in a comparison without being properly initialized previously.
Fix this by initializing variable *resp_buftype* to CIFS_NO_BUFFER
in order to avoid unpredictable or unintended results.
Addresses-Coverity-ID: 1473971 ("Uninitialized scalar variable")
Fixes: c5d25bdb2967 ("cifs: add IOCTL for QUERY_INFO passthrough to userspace")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
This allows userspace tools to query the raw info levels for cifs files
and process the response in userspace.
In particular this is useful for many of those data where there is no
corresponding native data structure in linux.
For example querying the security descriptor for a file and extract the
SIDs.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Clarify meaning (in comments) meaning of various
options for debug messages in cifs.ko. Also fixed
trivial formatting/style issue with previous patch.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, no messages are printed when mounting a CIFS filesystem and
no debug configuration is enabled.
However, a CIFS mount information is valuable when troubleshooting
and/or forensic analyzing a system and finding out if was a CIFS
endpoint mount attempted.
Other filesystems such as XFS, EXT* does issue a printk() when mounting
their filesystems.
A terse log message is printed only if cifsFYI is not enabled. Otherwise,
the default full debug message is printed.
In order to not clutter and classify correctly the event messages, these
are logged as KERN_INFO level.
Sample mount operations:
[root@corinthians ~]# mount -o user=administrator //172.25.250.18/c$ /mnt
(non-existent system)
[root@corinthians ~]# mount -o user=administrator //172.25.250.19/c$ /mnt
(Valid system)
Kernel message log for the mount operations:
[ 450.464543] CIFS: Attempting to mount //172.25.250.18/c$
[ 456.478186] CIFS VFS: Error connecting to socket. Aborting operation.
[ 456.478381] CIFS VFS: cifs_mount failed w/return code = -113
[ 467.688866] CIFS: Attempting to mount //172.25.250.19/c$
Signed-off-by: Rodrigo Freire <rfreire@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, CIFS lacks a internal logging function that prints out data
when CIFS_DEBUG=n. When CIFS_DEBUG=y, the only message level for CIFS
events are KERN_ERR or KERN_DEBUG.
This patch creates cifs_info(), which is useful for printing
non-critical event messges, at either CIFS_DEBUG state.
Signed-off-by: Rodrigo Freire <rfreire@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
RHBZ 1484130
Update cifs_find_fid_lock_conflict() to recognize that
ODF locks do not conflict with eachother.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It is not necessary to deregister a memory registration after it has been
successfully invalidated.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When issuing SMB1 read/write, pass the page offset to transport.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In some error conditions, resp_buftype can be passed uninitialised to
free_rsp_buf(), potentially resulting in a spurious debug message.
If resp_buftype randomly had the value 1 (CIFS_SMALL_BUFFER) then this
would log a debug message.
The rsp pointer is initialised to NULL so there is no other side-effect.
Detected by CoverityScan, CID 1438585 ("Uninitialized scalar variable")
Detected by CoverityScan, CID 1438667 ("Uninitialized scalar variable")
Detected by CoverityScan, CID 1438764 ("Uninitialized scalar variable")
Signed-off-by: Garry McNulty <garrmcnu@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
Be able to log a ftrace message on success and/or failure of
sending a lease break response to the server.
Example output:
TASK-PID CPU# |||| TIMESTAMP FUNCTION
| | | |||| | |
kworker/1:1-5681 [001] .... 11123.530457: smb3_lease_done: sid=0x291e3e0f tid=0x8ba43071 lease_key=0x1852ca0d3ecd9b55847750a86716fde lease_state=0x0
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
In network file system it is fairly easy for server and client
atime vs. mtime to get confused (and atime updated less frequently)
which we noticed broke some apps which expect atime >= mtime
Also ignore relatime mount option (rather than error on it) since
relatime is basically what some network server fs are doing
(relatime).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
Modern servers often support 8MB as maximum i/o size, and we see some
performance benefits (my testing showed 1 to 13% on write paths,
and 1 to 3% on read paths for increasing the default to 4MB). If server
doesn't support larger i/o size, during negotiate protocol it is already
set correctly to the server's maximum if lower than 4MB.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
As we reset credits later in the reconnect path, useful
to have optional (cifsFYI) debug message.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
tcon->Flags is only used by SMB1 code and changing it is not permanent
(you lose the setting on tcon reconnect).
* Move the setting to superblock flags (per mount-points).
* Make automount callback exit early when flag present
* Make dfs resolving happening in mount syscall exit early if flag present
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Each time we reconnect to the same server, bump an instance
counter (and display in /proc/fs/cifs/DebugData) to make it
easier to debug.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
