summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-27drm/vkms: Fix race-condition between the hrtimer and the atomic commitMaíra Canal
Currently, it is possible for the composer to be set as enabled and then as disabled without a proper call for the vkms_vblank_simulate(). This is problematic, because the driver would skip one CRC output, causing CRC tests to fail. Therefore, we need to make sure that, for each time the composer is set as enabled, a composer job is added to the queue. In order to provide this guarantee, add a mutex that will lock before the composer is set as enabled and will unlock only after the composer job is added to the queue. This way, we can have a guarantee that the driver won't skip a CRC entry. This race-condition is affecting the IGT test "writeback-check-output", making the test fail and also, leaking writeback framebuffers, as the writeback job is queued, but it is not signaled. This patch avoids both problems. [v2]: * Create a new mutex and keep the spinlock across the atomic commit in order to avoid interrupts that could result in deadlocks. Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230523123207.173976-1-mcanal@igalia.com
2023-07-27drm/vkms: Add support to 1D gamma LUTArthur Grillo
Support a 1D gamma LUT with interpolation for each color channel on the VKMS driver. Add a check for the LUT length by creating vkms_atomic_check(). Enable VKMS to run the test igt@kms_plane@pixel-format. Tested with: igt@kms_color@gamma igt@kms_color@legacy-gamma igt@kms_color@invalid-gamma-lut-sizes v2: - Add interpolation between the values of the LUT (Simon Ser) v3: - s/ratio/delta (Pekka) - s/color_channel/channel_value (Pekka) - s/lut_area/lut_channel - Store the `drm_color_lut`, `lut_length`, and `channel_value2index_ratio` inside a struct called `vkms_lut` (Pekka) - Pre-compute some constants values used through the LUT procedure (Pekka) - Change the switch statement to a cast to __u16* (Pekka) - Make the apply_lut_to_channel_value return the computation result (Pekka) v4: - Add a comment explaining that `enum lut_area` depends on the layout of `struct drm_color_lut` (Pekka) - Remove unused variable (kernel test robot) v5: - Mention that this will make it possible to run the test igt@kms_plane@pixel-format (Maíra) - s/had/has (Maíra) Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230709013835.161004-1-arthurgrillo@riseup.net
2023-07-27drm/i915/selftest/gsc: Ensure GSC Proxy init completes before selftestsAlan Previn
On MTL, if the GSC Proxy init flows haven't completed, submissions to the GSC engine will fail. Those init flows are dependent on the mei's gsc_proxy component that is loaded in parallel with i915 and a worker that could potentially start after i915 driver init is done. That said, all subsytems that access the GSC engine today does check for such init flow completion before using the GSC engine. However, selftests currently don't wait on anything before starting. To fix this, add a waiter function at the start of __run_selftests that waits for gsc-proxy init flows to complete. Selftests shouldn't care if the proxy-init failed as that should be flagged elsewhere. Difference from prior versions: v7: - Change the fw status to INTEL_UC_FIRMWARE_LOAD_FAIL if the proxy-init fails so that intel_gsc_uc_fw_proxy_get_status catches it. (Daniele) v6: - Add a helper that returns something more than a boolean so we selftest can stop waiting if proxy-init hadn't completed but failed (Daniele). v5: - Move the call to __wait_gsc_proxy_completed from common __run_selftests dispatcher to the group-level selftest function (Trvtko). - change the pr_info to pr_warn if we hit the timeout. v4: - Remove generalized waiters function table framework (Tvrtko). - Remove mention of CI-framework-timeout from comments (Tvrtko). v3: - Rebase to latest drm-tip. v2: - Based on internal testing, increase the timeout for gsc-proxy specific case to 8 seconds. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230720230126.375566-1-alan.previn.teres.alexis@intel.com
2023-07-27drm/radeon: Prefer strscpy over strlcpy calls in radeon_atombios.cSrinivasan Shanmugam
Use the strscpy method instead of strlcpy method. Fixes the below: WARNING: Prefer strscpy over strlcpy Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: correct vmhub index in GMC v10/11Lang Yu
Align with new vmhub definition. v2: use client_id == VMC to decide vmhub(Hawking) Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: Fix non-standard format specifiers in 'amdgpu_show_fdinfo'Srinivasan Shanmugam
Fixes the following: WARNING: %Lu is non-standard C, use %llu + seq_printf(m, "drm-client-id:\t%Lu\n", vm->immediate.fence_context); WARNING: %Ld is non-standard C, use %lld + seq_printf(m, "drm-engine-%s:\t%Ld ns\n", amdgpu_ip_name[hw_ip], Cc: Guchun Chen <guchun.chen@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: set completion status as preempted for the resubmissionJiadong Zhu
The driver's CSA buffer is shared by all the ibs. When the high priority ib is submitted after the preempted ib, CP overrides the ib_completion_status as completed in the csa buffer. After that the preempted ib is resubmitted, CP would clear some locals stored for ib resume when reading the completed status, which causes gpu hang in some cases. Always set status as preempted for those resubmitted ib instead of reading everything from the CSA buffer. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2717 Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/radeon: Fix ENOSYS with better fitting error codes in radeon_gem.cSrinivasan Shanmugam
Replace the error code from 'ENOSYS' to 'EOPNOTSUPP' for unimplemented radeon_gem_pread_ioctl & radeon_gem_pwrite_ioctl Fixes the following: WARNING: ENOSYS means 'invalid syscall nr' and nothing else. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/radeon: Remove unnecessary NULL test before kfree in ↵Srinivasan Shanmugam
'radeon_connector_free_edid' Fixes the below: WARNING: kfree(NULL) is safe and this check is probably not required. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: Use parentheses for sizeof *numa_info in 'amdgpu_acpi_get_numa_info'Srinivasan Shanmugam
Fixes the below: WARNING: sizeof *numa_info should be sizeof(*numa_info) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/radeon: Prefer strscpy over strlcpy in 'radeon_combios_get_power_modes'Srinivasan Shanmugam
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated. The safe replacement is strscpy() [1]. cleanup to remove the strlcpy() function entirely from the kernel [2]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Fixes the following: WARNING: Prefer strscpy over strlcpy + strlcpy(info.type, name, sizeof(info.type)); WARNING: Prefer strscpy over strlcpy + strlcpy(info.type, name, sizeof(info.type)); Cc: Guchun Chen <guchun.chen@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: Fix unnecessary else after return in 'amdgpu_eeprom_xfer'Srinivasan Shanmugam
Fixes the following: WARNING: else is not generally useful after a break or return + return -EINVAL; + } else { Cc: Guchun Chen <guchun.chen@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu/discovery: enable PSP 14.0.0 supportLi Ma
Add it to IP discovery. Signed-off-by: Li Ma <li.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: add PSP 14.0.0 supportLi Ma
Uses same driver interface as 13.0. Signed-off-by: Li Ma <li.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/radeon: Fix format errorYonggang Wu
Fix the error(s): ERROR: space required before the open parenthesis '(' Signed-off-by: Yonggang Wu <wuyonggang001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdkfd: fix and enable ttmp setup for gfx11Jonathan Kim
The MES cached process context must be cleared on adding any queue for the first time. For proper debug support, the MES will clear it's cached process context on the first call to SET_SHADER_DEBUGGER. This allows TTMPs to be pesistently enabled in a safe manner. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Eric Huang <jinhuieric@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: Move externs to amdgpu.h file from amdgpu_drv.cSrinivasan Shanmugam
Fixes the following: WARNING: externs should be avoided in .c files +extern const struct attribute_group amdgpu_vram_mgr_attr_group; WARNING: externs should be avoided in .c files +extern const struct attribute_group amdgpu_gtt_mgr_attr_group; WARNING: externs should be avoided in .c files +extern const struct attribute_group amdgpu_flash_attr_group; And other style fixes: WARNING: Block comments should align the * on each line WARNING: void function return statements are not generally useful WARNING: braces {} are not necessary for single statement blocks Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: Prefer dev_* variant over printk in amdgpu_atpx_handler.cSrinivasan Shanmugam
Changed from printk to dev_* variants so that we get better debug info when there are multiple GPUs in the system. Fixes other style issue: ERROR: open brace '{' following function definitions go on the next line WARNING: printk() should include KERN_<LEVEL> facility level Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: Fix no new typedefs for enum _AMDGPU_DOORBELL_*Srinivasan Shanmugam
Fixes the following: WARNING: do not add new typedefs Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: Fix ENOSYS means 'invalid syscall nr' in amdgpu_device.cSrinivasan Shanmugam
ENOSYS should be used for nonexistent syscalls only, replace ENOSYS with EOPNOTSUPP for reset handlers that are not implemented for respective ASIC. WARNING: ENOSYS means 'invalid syscall nr' and nothing else + if (r == -ENOSYS) WARNING: ENOSYS means 'invalid syscall nr' and nothing else + if (r == -ENOSYS) And other following style fixes in amdgpu_device.c: WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'. WARNING: Block comments should align the * on each line WARNING: Missing a blank line after declarations WARNING: braces {} are not necessary for single statement blocks Cc: Lijo Lazar <lijo.lazar@amd.com> Cc: Kent Russell <kent.russell@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: remove repeat code for mes_add_queue_pktBob Zhou
The setting of mes_add_queue_pkt is repeated, so remove it. Signed-off-by: Bob Zhou <bob.zhou@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: Checkpoint and Restore VRAM BOs without VARamesh Errabolu
Extend checkpoint logic to allow inclusion of VRAM BOs that do not have a VA attached Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: enable trap of each kfd vmid for gfx v9.4.3Eric Huang
To setup ttmp on as default for gfx v9.4.3 in IP hw init. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amd/pm: open brace '{' following struct go on the same lineRan Sun
ERROR: open brace '{' following struct go on the same line Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amd/pm: open brace '{' following function definitions go on the next lineRan Sun
ERROR: open brace '{' following function definitions go on the next line Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amd/pm: that open brace { should be on the previous lineRan Sun
ERROR: that open brace { should be on the previous line Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amd/pm: Clean up errors in arcturus_ppt.cRan Sun
Fix the following errors reported by checkpatch: ERROR: "foo* bar" should be "foo *bar" ERROR: spaces required around that '=' (ctx:VxW) ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amd/pm: Clean up errors in arcturus_ppt.cRan Sun
Fix the following errors reported by checkpatch: ERROR: spaces required around that '=' (ctx:VxW) ERROR: spaces required around that '>=' (ctx:WxV) Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amd/pm: Clean up errors in navi10_ppt.cRan Sun
Fix the following errors reported by checkpatch: ERROR: open brace '{' following function definitions go on the next line ERROR: space required before the open parenthesis '(' ERROR: space required after that ',' (ctx:VxV) ERROR: spaces required around that '=' (ctx:VxW) Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amd/pm: add missing spaces before '('Ran Sun
ERROR: space required before the open parenthesis '(' Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/radeon: Move assignment outside if conditionRan Sun
Fixes the following checkpatch errors: ERROR: do not use assignment in if condition Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/radeon: that open brace { should be on the previous lineRan Sun
ERROR: that open brace { should be on the previous line Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/radeon: that open brace { should be on the previous lineRan Sun
ERROR: that open brace { should be on the previous line Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/radeon: add missing spaces after ',' and else should follow close brace '}'Ran Sun
ERROR: else should follow close brace '}' ERROR: space required after that ',' (ctx:VxV) Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/tegra: sor: Convert to devm_platform_ioremap_resource()Yangtao Li
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-16-frank.li@vivo.com
2023-07-27drm/tegra: hdmi: Convert to devm_platform_ioremap_resource()Yangtao Li
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-5-frank.li@vivo.com
2023-07-27drm/tegra: dpaux: Fix incorrect return value of platform_get_irqYangtao Li
When platform_get_irq fails, we should return dpaux->irq instead of -ENXIO. Fixes: 6b6b604215c6 ("drm/tegra: Add eDP support") Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-13-frank.li@vivo.com
2023-07-27drm/tegra: output: hdmi: Support bridge/connectorMaxim Schwalm
Some Tegra device-trees may specify a video output graph, which involves MHL bridge/simple bridge and/or connector framework. This patch adds support for the bridge/connector attached to the HDMI output, allowing us to model the hardware properly. Inspired by: 29efdc2 ("drm/tegra: output: rgb: Support LVDS encoder bridge") Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30 Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # ASUS P1801-T T30 Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30 Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230618085046.10081-2-clamor95@gmail.com
2023-07-27drm/tegra: Enable runtime PM during probeMikko Perttunen
Currently, engine drivers only enable runtime PM during the host1x init callback. This can happen slightly later than the probe, which can cause the power domain to intermittently not be turned off after probe. My hypothesis is that there is a race condition between the post-probe power domain poweroff that is done from a queued work, and the pm_runtime_enable call happening in the host1x init callback. If the pm_runtime_enable call happens first, everything is OK and the power off work can disable the power domain as PM runtime is enabled and the device is runtime suspended. If power off work runs first, PM runtime is still disabled for the device and the domain must be kept powered. Resolve the issue by moving the runtime PM enablement to the probe function. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230613095215.2497004-1-cyndis@kapsi.fi
2023-07-27drm/tegra: dpaux: Use devm_platform_ioremap_resource()Yang Li
Convert platform_get_resource(),devm_ioremap_resource() to a single call to devm_platform_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230421084952.45275-1-yang.lee@linux.alibaba.com
2023-07-27gpu: host1x: Return error when context device not attached to IOMMUMikko Perttunen
If a context device was not attached to IOMMU, we kept the old success err value causing context devices to be unregistered but success to be returned. This would mean that things would go on but with context isolation disabled. To decide on an explicit behavior, let's return an error code here instead. If someone wants to go without IOMMU on a platform modern enough to support context isolation, they can remove the context devices from device tree. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413082202.114721-2-cyndis@kapsi.fi
2023-07-27drm/tegra: Add error check for NVDEC firmware memory allocationMikko Perttunen
The return value for tegra_drm_alloc was missing an error check. Add one. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413082202.114721-1-cyndis@kapsi.fi
2023-07-27drm/i915: Avoid -Wconstant-logical-operand in nsecs_to_jiffies_timeout()Nathan Chancellor
A proposed update to clang's -Wconstant-logical-operand to warn when the left hand side is a constant shows the following instance in nsecs_to_jiffies_timeout() when NSEC_PER_SEC is not a multiple of HZ, such as CONFIG_HZ=300: drivers/gpu/drm/i915/gem/i915_gem_wait.c:189:24: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] 189 | if (NSEC_PER_SEC % HZ && | ~~~~~~~~~~~~~~~~~ ^ drivers/gpu/drm/i915/gem/i915_gem_wait.c:189:24: note: use '&' for a bitwise operation 189 | if (NSEC_PER_SEC % HZ && | ^~ | & drivers/gpu/drm/i915/gem/i915_gem_wait.c:189:24: note: remove constant to silence this warning 1 warning generated. Turn this into an explicit comparison against zero to make the expression a boolean to make it clear this should be a logical check, not a bitwise one. Link: https://reviews.llvm.org/D142609 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230718-nsecs_to_jiffies_timeout-constant-logical-operand-v1-2-36ed8fc8faea@kernel.org
2023-07-27drm/v3d: Avoid -Wconstant-logical-operand in nsecs_to_jiffies_timeout()Nathan Chancellor
A proposed update to clang's -Wconstant-logical-operand to warn when the left hand side is a constant shows the following instance in nsecs_to_jiffies_timeout() when NSEC_PER_SEC is not a multiple of HZ, such as CONFIG_HZ=300: In file included from drivers/gpu/drm/v3d/v3d_debugfs.c:12: drivers/gpu/drm/v3d/v3d_drv.h:343:24: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] 343 | if (NSEC_PER_SEC % HZ && | ~~~~~~~~~~~~~~~~~ ^ drivers/gpu/drm/v3d/v3d_drv.h:343:24: note: use '&' for a bitwise operation 343 | if (NSEC_PER_SEC % HZ && | ^~ | & drivers/gpu/drm/v3d/v3d_drv.h:343:24: note: remove constant to silence this warning 1 warning generated. Turn this into an explicit comparison against zero to make the expression a boolean to make it clear this should be a logical check, not a bitwise one. Link: https://reviews.llvm.org/D142609 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230718-nsecs_to_jiffies_timeout-constant-logical-operand-v1-1-36ed8fc8faea@kernel.org
2023-07-27dt-bindings: display: panel: Document Hydis HV070WX2-1E0Thierry Reding
The Hydis HV070WX2-1E0 is a 7" WXGA (800x1280) TFT LCD LVDS panel that is one of the variants used on Google Nexus 7. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230726185010.2294709-2-thierry.reding@gmail.com
2023-07-27dt-bindings: display: panel: Move Chunghwa CLAA070WP03XG to LVDSThierry Reding
The Chunghwa CLAA070WP03XG is an LVDS panel, so move it to the correct bindings file. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230726185010.2294709-1-thierry.reding@gmail.com
2023-07-27dt-bindings: display: panel: Move HannStar HSD101PWW2 to LVDSThierry Reding
The HannStar HSD101PWW2 is an LVDS panel, so move it to the correct bindings file. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230726184857.2294570-1-thierry.reding@gmail.com
2023-07-27drm/ssd130x: Use shadow-buffer helpers when managing plane's stateJavier Martinez Canillas
The commit 45b58669e532 ("drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback") moved the buffers allocation to be done in the primary plane's .atomic_check() callback. But it missed that since the driver uses a shadow-buffered plane, the __drm_gem_{reset,duplicate,destroy}_shadow_plane() helper functions must be used in the struct drm_plane_funcs handlers. This was missed because the mentioned commit did not remove the macro DRM_GEM_SHADOW_PLANE_FUNCS, which leads to the custom plane's atomic state management handlers to not be used. Fixes: 45b58669e532 ("drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback") Reported-by: Arnd Bergmann <arnd@arndb.de> Closes: https://lore.kernel.org/dri-devel/20230727122412.2464210-1-arnd@kernel.org Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230727140453.577445-1-javierm@redhat.com
2023-07-27Merge tag 'drm-misc-next-2023-07-27' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.6: UAPI Changes: Cross-subsystem Changes: * dma-buf: * Documentation fixes * fbdev: * Make FB core selectable without drivers * Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT from all drivers and <linux/fb.h> * Add helper macros and Kconfig tokens for DMA-allocated framebuffers * Cleanups Core Changes: * Respect given gfp flags in drmm_kmalloc() Driver Changes: * ast: * Cleanups * bridge: * anx7625: Locking fixes * tc358767: Fix hardware delays * Minor fixes and cleanups * exynos: * Use fbdev DMA helpers * komeda: * Always attach encoder * omapdrm: * Use fbdev DMA helpers * panel: * ld9040: Fix Kconfig dependency * Minor cleanups * ssd130x: * Fix allocation of temporary buffers * Fix pitch computation * tegra: * Use fbdev DMA helpers Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230727124444.GA5547@linux-uq9g
2023-07-27drm/i915/color: Downscale degamma lut values read from hardwareChaitanya Kumar Borah
For MTL and beyond, convert back the 24 bit lut values read from HW to 16 bit values to maintain parity with userspace values. This way we avoid pipe config mismatch for pre-csc lut values. v2: Add helper function to downscale values (Jani) Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230725083002.3779717-3-chaitanya.kumar.borah@intel.com
generated by cgit (git 2.34.1) at 2025-09-11 17:32:42 +0000