summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-16sched/core: Fix NULL pointer access fault in sched_setaffinity() with ↵Waiman Long
non-SMP configs The kernel commit 9a5418bc48ba ("sched/core: Use kfree_rcu() in do_set_cpus_allowed()") introduces a bug for kernels built with non-SMP configs. Calling sched_setaffinity() on such a uniprocessor kernel will cause cpumask_copy() to be called with a NULL pointer leading to general protection fault. This is not really a problem in real use cases as there aren't that many uniprocessor kernel configs in use and calling sched_setaffinity() on such a uniprocessor system doesn't make sense. Fix this problem by making sure cpumask_copy() will not be called in such a case. Fixes: 9a5418bc48ba ("sched/core: Use kfree_rcu() in do_set_cpus_allowed()") Reported-by: kernel test robot <yujie.liu@intel.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230115193122.563036-1-longman@redhat.com
2023-01-16USB: serial: option: add Quectel EM05CN modemDuke Xin(辛安文)
The EM05CN modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05CN (SG) modemDuke Xin(辛安文)
The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: cp210x: add SCALANCE LPE-9000 device idMichael Adler
Add the USB serial console device ID for Siemens SCALANCE LPE-9000 which have a USB port for their serial console. Signed-off-by: Michael Adler <michael.adler@siemens.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EC200U modemAli Mirghasemi
Add support for EC200U modem 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS usb-device output: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0901 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Ali Mirghasemi <ali.mirghasemi1376@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05-G (RS) modemDuke Xin(辛安文)
The EM05-G (RS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-15block, bfq: switch 'bfqg->ref' to use atomic refcount apisYu Kuai
The updating of 'bfqg->ref' should be protected by 'bfqd->lock', however, during code review, we found that bfq_pd_free() update 'bfqg->ref' without holding the lock, which is problematic: 1) bfq_pd_free() triggered by removing cgroup is called asynchronously; 2) bfqq will grab bfqg reference, and exit bfqq will drop the reference, which can concurrent with 1). Unfortunately, 'bfqd->lock' can't be held here because 'bfqd' might already be freed in bfq_pd_free(). Fix the problem by using atomic refcount apis. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230103084755.1256479-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-16rust: print: avoid evaluating arguments in `pr_*` macros in `unsafe` blocksMiguel Ojeda
At the moment it is possible to perform unsafe operations in the arguments of `pr_*` macros since they are evaluated inside an `unsafe` block: let x = &10u32 as *const u32; pr_info!("{}", *x); In other words, this is a soundness issue. Fix it so that it requires an explicit `unsafe` block. Reported-by: Wedson Almeida Filho <wedsonaf@gmail.com> Reported-by: Domen Puncer Kugler <domen.puncerkugler@nccgroup.com> Link: https://github.com/Rust-for-Linux/linux/issues/479 Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
2023-01-16zonefs: Detect append writes at invalid locationsDamien Le Moal
Using REQ_OP_ZONE_APPEND operations for synchronous writes to sequential files succeeds regardless of the zone write pointer position, as long as the target zone is not full. This means that if an external (buggy) application writes to the zone of a sequential file underneath the file system, subsequent file write() operation will succeed but the file size will not be correct and the file will contain invalid data written by another application. Modify zonefs_file_dio_append() to check the written sector of an append write (returned in bio->bi_iter.bi_sector) and return -EIO if there is a mismatch with the file zone wp offset field. This change triggers a call to zonefs_io_error() and a zone check. Modify zonefs_io_error_cb() to not expose the unexpected data after the current inode size when the errors=remount-ro mode is used. Other error modes are correctly handled already. Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
2023-01-15Merge branch 'samples/bpf: modernize BPF functionality test programs'Alexei Starovoitov
"Daniel T. Lee" says: ==================== Currently, there are many programs under samples/bpf to test the various functionality of BPF that have been developed for a long time. However, the kernel (BPF) has changed a lot compared to the 2016 when some of these test programs were first introduced. Therefore, some of these programs use the deprecated function of BPF, and some programs no longer work normally due to changes in the API. To list some of the kernel changes that this patch set is focusing on, - legacy BPF map declaration syntax support had been dropped [1] - bpf_trace_printk() always append newline at the end [2] - deprecated styled BPF section header (bpf_load style) [3] - urandom_read tracepoint is removed (used for testing overhead) [4] - ping sends packet with SOCK_DGRAM instead of SOCK_RAW [5]* - use "vmlinux.h" instead of including individual headers In addition to this, this patchset tries to modernize the existing testing scripts a bit. And for network-related testing programs, a separate header file was created and applied. (To use the Endianness conversion function from xdp_sample and bunch of constants) [1]: https://github.com/libbpf/libbpf/issues/282 [2]: commit ac5a72ea5c89 ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()") [3]: commit ceb5dea56543 ("samples: bpf: Remove bpf_load loader completely") [4]: commit 14c174633f34 ("random: remove unused tracepoints") [5]: https://lwn.net/Articles/422330/ *: This is quite old, but I'm not sure why the code was initially developed to filter only SOCK_RAW. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: change _kern suffix to .bpf with BPF test programsDaniel T. Lee
This commit changes the _kern suffix to .bpf with the BPF test programs. With this modification, test programs will inherit the benefit of the new CLANG-BPF compile target. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-11-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: use vmlinux.h instead of implicit headers in BPF test programDaniel T. Lee
This commit applies vmlinux.h to BPF functionality testing program. Macros that were not defined despite migration to "vmlinux.h" were defined separately in individual files. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-10-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: replace BPF programs header with net_shared.hDaniel T. Lee
This commit applies "net_shared.h" to BPF programs to remove existing network related header dependencies. Also, this commit removes unnecessary headers before applying "vmlinux.h" to the BPF programs. Mostly, endianness conversion function has been applied to the source. In addition, several macros have been defined to fulfill the INET, TC-related constants. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-9-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: split common macros to net_shared.hDaniel T. Lee
Currently, many programs under sample/bpf often include individual macros by directly including the header under "linux/" rather than using the "vmlinux.h" header. However, there are some problems with migrating to "vmlinux.h" because there is no definition for utility functions such as endianness conversion (ntohs/htons). Fortunately, the xdp_sample program already has a function that can be replaced to solve this problem. Therefore, this commit attempts to separate these functions into a file called net_shared.h to make them universally available. Additionally, this file includes network-related macros that are not defined in "vmlinux.h". (inspired by 'selftests' bpf_tracing_net.h) Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-8-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: replace legacy map with the BTF-defined mapDaniel T. Lee
With libbpf 1.0 release, support for legacy BPF map declaration syntax had been dropped. If you run a program using legacy BPF in the latest libbpf, the following error will be output. libbpf: map 'lwt_len_hist_map' (legacy): legacy map definitions are deprecated, use BTF-defined maps instead libbpf: Use of BPF_ANNOTATE_KV_PAIR is deprecated, use BTF-defined maps in .maps section instead This commit replaces legacy map with the BTF-defined map. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-7-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: replace broken overhead microbenchmark with fib_table_lookupDaniel T. Lee
The test_overhead bpf program is designed to compare performance between tracepoint and kprobe. Initially it used task_rename and urandom_read tracepoint. However, commit 14c174633f34 ("random: remove unused tracepoints") removed urandom_read tracepoint, and for this reason the test_overhead got broken. This commit introduces new microbenchmark using fib_table_lookup. This microbenchmark sends UDP packets to localhost in order to invoke fib_table_lookup. In a nutshell: fd = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); addr.sin_addr.s_addr = inet_addr(DUMMY_IP); addr.sin_port = htons(DUMMY_PORT); for() { sendto(fd, buf, strlen(buf), 0, (struct sockaddr *)&addr, sizeof(addr)); } on 4 cpus in parallel: lookup per sec base (no tracepoints, no kprobes) 381k with kprobe at fib_table_lookup() 325k with tracepoint at fib:fib_table_lookup 330k with raw_tracepoint at fib:fib_table_lookup 365k Fixes: 14c174633f34 ("random: remove unused tracepoints") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-6-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: fix broken cgroup socket testingDaniel T. Lee
Currently, executing test_cgrp2_sock2 fails due to wrong section header. This 'cgroup/sock1' style section is previously used at 'samples/bpf_load' (deprecated) BPF loader. Because this style isn't supported in libbpf, this commit fixes this problem by correcting the section header. $ sudo ./test_cgrp2_sock2.sh libbpf: prog 'bpf_prog1': missing BPF prog type, check ELF section name 'cgroup/sock1' libbpf: prog 'bpf_prog1': failed to load: -22 libbpf: failed to load object './sock_flags_kern.o' ERROR: loading BPF object file failed In addition, this BPF program filters ping packets by comparing whether the socket type uses SOCK_RAW. However, after the ICMP socket[1] was developed, ping sends ICMP packets using SOCK_DGRAM. Therefore, in this commit, the packet filtering is changed to use SOCK_DGRAM instead of SOCK_RAW. $ strace --trace socket ping -6 -c1 -w1 ::1 socket(AF_INET6, SOCK_DGRAM, IPPROTO_ICMPV6) = 3 [1]: https://lwn.net/Articles/422330/ Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-5-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: fix broken lightweight tunnel testingDaniel T. Lee
The test_lwt_bpf is a script that tests the functionality of BPF through the output of the ftrace with bpf_trace_printk. Currently, this program is not operating normally for several reasons. First of all, this test script can't parse the ftrace results properly. GNU sed tries to be as greedy as possible when attempting pattern matching. Due to this, cutting metadata (such as timestamp) from the log entry of ftrace doesn't work properly, and also desired log isn't extracted properly. To make sed stripping clearer, 'nocontext-info' option with the ftrace has been used to remove metadata from the log. Also, instead of using unclear pattern matching, this commit specifies an explicit parse pattern. Also, unlike before when this test was introduced, the way bpf_trace_printk behaves has changed[1]. The previous bpf_trace_printk had to always have '\n' in order to print newline, but now that the bpf_trace_printk call includes newline by default, so '\n' is no longer needed. Lastly with the lwt ENCAP_BPF out, the context information with the sk_buff protocol is preserved. Therefore, this commit changes the previous test result from 'protocol 0' to 'protocol 8', which means ETH_P_IP. [1]: commit ac5a72ea5c89 ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-4-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: refactor BPF functionality testing scriptsDaniel T. Lee
Currently, some test scripts are experiencing minor errors related to executing tests. $ sudo ./test_cgrp2_sock.sh ./test_cgrp2_sock.sh: 22: test_cgrp2_sock: not found This problem occurs because the path to the execution target is not properly specified. Therefore, this commit solves this problem by specifying a relative path to its executables. This commit also makes a concise refactoring of hard-coded BPF program names. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-3-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15samples/bpf: ensure ipv6 is enabled before running testsDaniel T. Lee
Currently, a few of BPF tests use ipv6 functionality. The problem here is that if ipv6 is disabled, these tests will fail, and even if the test fails, it will not tell you why it failed. $ sudo ./test_cgrp2_sock2.sh RTNETLINK answers: Permission denied In order to fix this, this commit ensures ipv6 is enabled prior to running tests. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-2-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-15Merge branch 'bpf: Add ipip6 and ip6ip decap support for bpf_skb_adjust_room()'Martin KaFai Lau
Ziyang Xuan says: ==================== Add ipip6 and ip6ip decap support for bpf_skb_adjust_room(). Main use case is for using cls_bpf on ingress hook to decapsulate IPv4 over IPv6 and IPv6 over IPv4 tunnel packets. And add ipip6 and ip6ip decap testcases to verify that bpf_skb_adjust_room() correctly decapsulate ipip6 and ip6ip tunnel packets. $./test_tc_tunnel.sh ipip encap 192.168.1.1 to 192.168.1.2, type ipip, mac none len 100 test basic connectivity 0 test bpf encap without decap (expect failure) Ncat: TIMEOUT. 1 test bpf encap with tunnel device decap 0 test bpf encap with bpf decap 0 OK ipip6 encap 192.168.1.1 to 192.168.1.2, type ipip6, mac none len 100 test basic connectivity 0 test bpf encap without decap (expect failure) Ncat: TIMEOUT. 1 test bpf encap with tunnel device decap 0 test bpf encap with bpf decap 0 OK ip6ip6 encap fd::1 to fd::2, type ip6tnl, mac none len 100 test basic connectivity 0 test bpf encap without decap (expect failure) Ncat: TIMEOUT. 1 test bpf encap with tunnel device decap 0 test bpf encap with bpf decap 0 OK sit encap fd::1 to fd::2, type sit, mac none len 100 test basic connectivity 0 test bpf encap without decap (expect failure) Ncat: TIMEOUT. 1 test bpf encap with tunnel device decap 0 test bpf encap with bpf decap 0 OK ... OK. All tests passed v3: - Fix compilation failure of selftests/bpf. - Combine two new branches in bpf_skb_adjust_room(). - Simplify description for new flags BPF_F_ADJ_ROOM_DECAP_L3_IP*. v2: - Use decap flags to indicate the new IP header. Do not rely on skb->encapsulation. ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-01-15selftests/bpf: add ipip6 and ip6ip decap to test_tc_tunnelZiyang Xuan
Add ipip6 and ip6ip decap testcases. Verify that bpf_skb_adjust_room() correctly decapsulate ipip6 and ip6ip tunnel packets. Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/dfd2d8cfdf9111bd129170d4345296f53bee6a67.1673574419.git.william.xuanziyang@huawei.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-01-15bpf: Add ipip6 and ip6ip decap support for bpf_skb_adjust_room()Ziyang Xuan
Add ipip6 and ip6ip decap support for bpf_skb_adjust_room(). Main use case is for using cls_bpf on ingress hook to decapsulate IPv4 over IPv6 and IPv6 over IPv4 tunnel packets. Add two new flags BPF_F_ADJ_ROOM_DECAP_L3_IPV{4,6} to indicate the new IP header version after decapsulating the outer IP header. Suggested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/b268ec7f0ff9431f4f43b1b40ab856ebb28cb4e1.1673574419.git.william.xuanziyang@huawei.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-01-15Linux 6.2-rc4v6.2-rc4Linus Torvalds
2023-01-15Merge tag 'x86_urgent_for_v6.2_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Make sure the poking PGD is pinned for Xen PV as it requires it this way - Fixes for two resctrl races when moving a task or creating a new monitoring group - Fix SEV-SNP guests running under HyperV where MTRRs are disabled to not return a UC- type mapping type on memremap() and thus cause a serious slowdown - Fix insn mnemonics in bioscall.S now that binutils is starting to fix confusing insn suffixes * tag 'x86_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: fix poking_init() for Xen PV guests x86/resctrl: Fix event counts regression in reused RMIDs x86/resctrl: Fix task CLOSID/RMID update race x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case x86/boot: Avoid using Intel mnemonics in AT&T syntax asm
2023-01-15Merge tag 'edac_urgent_for_v6.2_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: - Fix the EDAC device's confusion in the polling setting units - Fix a memory leak in highbank's probing function * tag 'edac_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/highbank: Fix memory leak in highbank_mc_probe() EDAC/device: Fix period calculation in edac_device_reset_delay_period()
2023-01-15Merge tag 'powerpc-6.2-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a build failure with some versions of ld that have an odd version string - Fix incorrect use of mutex in the IMC PMU driver Thanks to Kajol Jain, Michael Petlan, Ojaswin Mujoo, Peter Zijlstra, and Yang Yingliang. * tag 'powerpc-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/hash: Make stress_hpt_timer_fn() static powerpc/imc-pmu: Fix use of mutex in IRQs disabled section powerpc/boot: Fix incorrect version calculation issue in ld_version
2023-01-14Merge tag 'iommu-fixes-v6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Core: Fix an iommu-group refcount leak - Fix overflow issue in IOVA alloc path - ARM-SMMU fixes from Will: - Fix VFIO regression on NXP SoCs by reporting IOMMU_CAP_CACHE_COHERENCY - Fix SMMU shutdown paths to avoid device unregistration race - Error handling fix for Mediatek IOMMU driver * tag 'iommu-fixes-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe() iommu/iova: Fix alloc iova overflows issue iommu: Fix refcount leak in iommu_device_claim_dma_owner iommu/arm-smmu-v3: Don't unregister on shutdown iommu/arm-smmu: Don't unregister on shutdown iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
2023-01-14Merge tag 'fixes-2023-01-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fix from Mike Rapoport: "memblock: always release pages to the buddy allocator in memblock_free_late() If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages() only releases pages to the buddy allocator if they are not in the deferred range. This is correct for free pages (as defined by for_each_free_mem_pfn_range_in_zone()) because free pages in the deferred range will be initialized and released as part of the deferred init process. memblock_free_pages() is called by memblock_free_late(), which is used to free reserved ranges after memblock_free_all() has run. All pages in reserved ranges have been initialized at that point, and accordingly, those pages are not touched by the deferred init process. This means that currently, if the pages that memblock_free_late() intends to release are in the deferred range, they will never be released to the buddy allocator. They will forever be reserved. In addition, memblock_free_pages() calls kmsan_memblock_free_pages(), which is also correct for free pages but is not correct for reserved pages. KMSAN metadata for reserved pages is initialized by kmsan_init_shadow(), which runs shortly before memblock_free_all(). For both of these reasons, memblock_free_pages() should only be called for free pages, and memblock_free_late() should call __free_pages_core() directly instead. One case where this issue can occur in the wild is EFI boot on x86_64. The x86 EFI code reserves all EFI boot services memory ranges via memblock_reserve() and frees them later via memblock_free_late() (efi_reserve_boot_services() and efi_free_boot_services(), respectively). If any of those ranges happens to fall within the deferred init range, the pages will not be released and that memory will be unavailable. For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI: v6.2-rc2: Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 178867 v6.2-rc2 + patch: Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 222816 # +43,949 pages" * tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: mm: Always release pages to the buddy allocator in memblock_free_late().
2023-01-14Merge tag 'hardening-v6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening fixes from Kees Cook: - Fix CFI hash randomization with KASAN (Sami Tolvanen) - Check size of coreboot table entry and use flex-array * tag 'hardening-v6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: Fix CFI hash randomization with KASAN firmware: coreboot: Check size of table entry and use flex-array
2023-01-14Merge tag 'modules-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module fix from Luis Chamberlain: "Just one fix for modules by Nick" * tag 'modules-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: kallsyms: Fix scheduling with interrupts disabled in self-test
2023-01-14Merge tag '6.2-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: - memory leak and double free fix - two symlink fixes - minor cleanup fix - two smb1 fixes * tag '6.2-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix uninitialized memory read for smb311 posix symlink create cifs: fix potential memory leaks in session setup cifs: do not query ifaces on smb1 mounts cifs: fix double free on failed kerberos auth cifs: remove redundant assignment to the variable match cifs: fix file info setting in cifs_open_file() cifs: fix file info setting in cifs_query_path_info()
2023-01-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor fixes in the hisi_sas driver which only impact enterprise style multi-expander and shared disk situations and no core changes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id scsi: hisi_sas: Use abort task set to reset SAS disks when discovered
2023-01-14Merge tag 'ata-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fix from Damien Le Moal: "A single fix to prevent building the pata_cs5535 driver with user mode linux as it uses msr operations that are not defined with UML" * tag 'ata-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_cs5535: Don't build on UML
2023-01-13sch_htb: Avoid grafting on htb_destroy_class_offload when destroying htbRahul Rameshbabu
Peek at old qdisc and graft only when deleting a leaf class in the htb, rather than when deleting the htb itself. Do not peek at the qdisc of the netdev queue when destroying the htb. The caller may already have grafted a new qdisc that is not part of the htb structure being destroyed. This fix resolves two use cases. 1. Using tc to destroy the htb. - Netdev was being prematurely activated before the htb was fully destroyed. 2. Using tc to replace the htb with another qdisc (which also leads to the htb being destroyed). - Premature netdev activation like previous case. Newly grafted qdisc was also getting accidentally overwritten when destroying the htb. Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230113005528.302625-1-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13Merge branch 'mlxbf_gige-add-bluefield-3-support'Jakub Kicinski
David Thompson says: ==================== mlxbf_gige: add BlueField-3 support This patch series adds driver logic to the "mlxbf_gige" Ethernet driver in order to support the third generation BlueField SoC (BF3). The existing "mlxbf_gige" driver is extended with BF3-specific logic and run-time decisions are made by the driver depending on the SoC generation (BF2 vs. BF3). The BF3 SoC is similar to BF2 SoC with regards to transmit and receive packet processing: * Driver rings usage; consumer & producer indices * Single queue for receive and transmit * DMA operation The differences between BF3 and BF2 SoC are: * In addition to supporting 1Gbps interface speed, the BF3 SoC adds support for 10Mbps and 100Mbps interface speeds * BF3 requires SerDes config logic to support its SGMII interface * BF3 adds support for "ethtool -s" for interface speed config * BF3 utilizes different MDIO logic for accessing the board-level PHY device Testing - Successful build of kernel for ARM64, ARM32, X86_64 - Tested ARM64 build on FastModels, Palladium, SoC ==================== Link: https://lore.kernel.org/r/20230112202609.21331-1-davthompson@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13mlxbf_gige: fix white space in mlxbf_gige_eth_ioctlDavid Thompson
This patch fixes the white space issue raised by checkpatch: CHECK: Alignment should match open parenthesis +static int mlxbf_gige_eth_ioctl(struct net_device *netdev, + struct ifreq *ifr, int cmd) Signed-off-by: David Thompson <davthompson@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13mlxbf_gige: add "set_link_ksettings" ethtool callbackDavid Thompson
This patch extends the "ethtool_ops" data structure to include the "set_link_ksettings" callback. This change enables configuration of the various interface speeds that the BlueField-3 supports (10Mbps, 100Mbps, and 1Gbps). Signed-off-by: David Thompson <davthompson@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13mlxbf_gige: support 10M/100M/1G speeds on BlueField-3David Thompson
The BlueField-3 OOB interface supports 10Mbps, 100Mbps, and 1Gbps speeds. The external PHY is responsible for autonegotiating the speed with the link partner. Once the autonegotiation is done, the BlueField PLU needs to be configured accordingly. This patch does two things: 1) Initialize the advertised control flow/duplex/speed in the probe based on the BlueField SoC generation (2 or 3) 2) Adjust the PLU speed config in the PHY interrupt handler Signed-off-by: David Thompson <davthompson@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13mlxbf_gige: add MDIO support for BlueField-3David Thompson
This patch adds initial MDIO support for the BlueField-3 SoC. Separate header files for the BlueField-2 and the BlueField-3 SoCs have been created. These header files hold the SoC-specific MDIO macros since the register offsets and bit fields have changed. Also, in BlueField-3 there is a separate register for writing and reading the MDIO data. Finally, instead of having "if" statements everywhere to differentiate between SoC-specific logic, a mlxbf_gige_mdio_gw_t struct was created for this purpose. Signed-off-by: David Thompson <davthompson@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13Merge branch 'mptcp-userspace-pm-create-sockets-for-the-right-family'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: userspace pm: create sockets for the right family Before these patches, the Userspace Path Manager would allow the creation of subflows with wrong families: taking the one of the MPTCP socket instead of the provided ones and resulting in the creation of subflows with likely not the right source and/or destination IPs. It would also allow the creation of subflows between different families or not respecting v4/v6-only socket attributes. Patch 1 lets the userspace PM select the proper family to avoid creating subflows with the wrong source and/or destination addresses because the family is not the expected one. Patch 2 makes sure the userspace PM doesn't allow the userspace to create subflows for a family that is not allowed. Patch 3 validates scenarios with a mix of v4 and v6 subflows for the same MPTCP connection. These patches fix issues introduced in v5.19 when the userspace path manager has been introduced. ==================== Link: https://lore.kernel.org/r/20230112-upstream-net-20230112-netlink-v4-v6-v1-0-6a8363a221d2@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13selftests: mptcp: userspace: validate v4-v6 subflows mixMatthieu Baerts
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux, it is possible to have that if the MPTCP socket has been created with AF_INET6 family without the IPV6_V6ONLY option. Here, a new IPv4 subflow is being added to the initial IPv6 connection, then being removed using Netlink commands. Cc: stable@vger.kernel.org # v5.19+ Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13mptcp: netlink: respect v4/v6-only socketsMatthieu Baerts
If an MPTCP socket has been created with AF_INET6 and the IPV6_V6ONLY option has been set, the userspace PM would allow creating subflows using IPv4 addresses, e.g. mapped in v6. The kernel side of userspace PM will also accept creating subflows with local and remote addresses having different families. Depending on the subflow socket's family, different behaviours are expected: - If AF_INET is forced with a v6 address, the kernel will take the last byte of the IP and try to connect to that: a new subflow is created but to a non expected address. - If AF_INET6 is forced with a v4 address, the kernel will try to connect to a v4 address (v4-mapped-v6). A -EBADF error from the connect() part is then expected. It is then required to check the given families can be accepted. This is done by using a new helper for addresses family matching, taking care of IPv4 vs IPv4-mapped-IPv6 addresses. This helper will be re-used later by the in-kernel path-manager to use mixed IPv4 and IPv6 addresses. While at it, a clear error message is now reported if there are some conflicts with the families that have been passed by the userspace. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13mptcp: explicitly specify sock family at subflow creation timePaolo Abeni
Let the caller specify the to-be-created subflow family. For a given MPTCP socket created with the AF_INET6 family, the current userspace PM can already ask the kernel to create subflows in v4 and v6. If "plain" IPv4 addresses are passed to the kernel, they are automatically mapped in v6 addresses "by accident". This can be problematic because the userspace will need to pass different addresses, now the v4-mapped-v6 addresses to destroy this new subflow. On the other hand, if the MPTCP socket has been created with the AF_INET family, the command to create a subflow in v6 will be accepted but the result will not be the one as expected as new subflow will be created in IPv4 using part of the v6 addresses passed to the kernel: not creating the expected subflow then. No functional change intended for the in-kernel PM where an explicit enforcement is currently in place. This arbitrary enforcement will be leveraged by other patches in a future version. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: stable@vger.kernel.org Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13net: lan966x: add missing fwnode_handle_put() for ports nodeClément Léger
Since the "ethernet-ports" node is retrieved using device_get_named_child_node(), it should be release after using it. Add missing fwnode_handle_put() and move the code that retrieved the node from device-tree to avoid complicated handling in case of error. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13net: pcs: pcs-lynx: use phylink_get_link_timer_ns() helperRussell King (Oracle)
Use the phylink_get_link_timer_ns() helper to get the period for the link timer. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1pFyhW-0067jq-Fh@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13plca.c: fix obvious mistake in checking retvalPiergiorgio Beruto
Revert a wrong fix that was done during the review process. The intention was to substitute "if(ret < 0)" with "if(ret)". Unfortunately, the intended fix did not meet the code. Besides, after additional review, it was decided that "if(ret < 0)" was actually the right thing to do. Fixes: 8580e16c28f3 ("net/ethtool: add netlink interface for the PLCA RS") Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/f2277af8951a51cfee2fb905af8d7a812b7beaf4.1673616357.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13Merge branch 'net-mdio-continue-separating-c22-and-c45'Jakub Kicinski
Michael Walle says: ==================== net: mdio: Continue separating C22 and C45 I've picked this older series from Andrew up and rebased it onto the latest net-next. This is the second patch set in the series which separates the C22 and C45 MDIO bus transactions at the API level to the MDIO bus drivers. ==================== Link: https://lore.kernel.org/r/20230112-net-next-c45-seperation-part-2-v1-0-5eeaae931526@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13enetc: Separate C22 and C45 transactionsAndrew Lunn
The enetc MDIO bus driver can perform both C22 and C45 transfers. Create separate functions for each and register the C45 versions using the new API calls where appropriate. This driver is shared with the Felix DSA switch, so update that at the same time. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13net: stmmac: Separate C22 and C45 transactions for xgmacAndrew Lunn
The stmmac MDIO bus driver in variant gmac4 can perform both C22 and C45 transfers. Create separate functions for each and register the C45 versions using the new API calls where appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-19 03:11:10 +0000