| Age | Commit message (Collapse) | Author |
|---|
|
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the
filename paths. Retain old deprecated symbols for compatibility, except
for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian Norris)
* pci/pwrctrl:
arm64: Kconfig: switch to HAVE_PWRCTRL
wifi: ath12k: switch to PCI_PWRCTRL_PWRSEQ
wifi: ath11k: switch to PCI_PWRCTRL_PWRSEQ
PCI/pwrctrl: Rename pwrctrl Kconfig symbols and slot module
PCI/pwrctrl: Cancel outstanding rescan work when unregistering
|
|
- Add pm_runtime_put() cleanup helper for use with __free() to
automatically drop the device usage count when a pointer goes out of
scope (Alex Williamson)
- Increment PM usage counter when probing reset methods so we don't try to
read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
* pci/pm:
PCI: Explicitly put devices into D0 when initializing
PCI: Increment PM usage counter when probing reset methods
PM: runtime: Define pm_runtime_put cleanup helper
|
|
- Fix pci_acpi_scan_root() memory leak when we fail to create a PCI bus
(Zhe Qiao)
* pci/pci-acpi:
PCI/ACPI: Fix allocated memory release on error in pci_acpi_scan_root()
|
|
- Use of_fwnode_handle() so of_node_to_fwnode() can be removed (Jiri Slaby)
* pci/irq:
irqdomain: pci: Switch to of_fwnode_handle()
|
|
- Ignore Presence Detect Changed caused by DPC. pciehp already ignores
Link Down/Up events caused by DPC, but on slots using in-band presence
detect, DPC causes a spurious Presence Detect Changed event (Lukas
Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports
using in-band presence detect, the reset causes a Presence Detect Changed
event, which mistakenly caused teardown and re-enumeration of the device.
Drivers may need to annotate code that resets their device (Lukas Wunner)
* pci/hotplug:
PCI: hotplug: Drop superfluous #include directives
PCI: pciehp: Ignore Link Down/Up caused by Secondary Bus Reset
PCI: pciehp: Ignore Presence Detect Changed caused by DPC
# Conflicts:
# drivers/pci/pci.h
|
|
- Remove pci_fixup_cardbus(), which has no users left (Heiner Kallweit)
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and has
been fixed by other commits (Lukas Wunner)
- Restrict visibility of pci_dev.match_driver since it's no longer used
outside the PCI core (Lukas Wunner)
* pci/enumeration:
PCI: Limit visibility of match_driver flag to PCI core
Revert "iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices"
PCI: Print the actual delay time in pci_bridge_wait_for_secondary_bus()
PCI: Use PCI_STD_NUM_BARS instead of 6
PCI: Remove pci_fixup_cardbus()
# Conflicts:
# drivers/pci/pci.h
|
|
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and
unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and
related flags since all uses have been removed (Philipp Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid', i.e.,
their behavior no longer depends on whether pcim_enable_device or
pci_enable_device() was used, and remove related code (Philipp Stanner)
* pci/devres:
PCI: Remove function pcim_intx() prototype from pci.h
PCI: Remove hybrid-devres usage warnings from kernel-doc
PCI: Remove redundant set of request functions
PCI: Remove exclusive requests flags from _pcim_request_region()
PCI: Remove pcim_request_region_exclusive()
Documentation/driver-api: Update pcim_enable_device()
PCI: Remove hybrid devres nature from request functions
PCI: Remove pcim_iounmap_regions()
mtip32xx: Remove unnecessary pcim_iounmap_regions() calls
|
|
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag
(Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may have
changed (Ilpo Järvinen)
* pci/bwctrl:
PCI: Update Link Speed after retraining
PCI/bwctrl: Replace lbms_count with PCI_LINK_LBMS_SEEN flag
|
|
- Initialize struct aer_err_info before using it to avoid depending on
stack garbage (Bjorn Helgaas)
- Log the DPC Error Source ID only when it's actually valid (when ERR_FATAL
or ERR_NONFATAL was received from a downstream device) and decode into
bus/device/function (Bjorn Helgaas)
- Consolidate AER Error Source ID in one place for message consistency
(Bjorn Helgaas)
- Update statistics and emit trace events early in AER logging paths,
before any potential ratelimiting (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages use the
same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable Errors.
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and RCU
stall warnings (Jon Pan-Doh)
* pci/aer:
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI/AER: Add sysfs attributes for log ratelimits
PCI/AER: Add ratelimits to PCI AER Documentation
PCI/AER: Ratelimit correctable and non-fatal error logging
PCI/AER: Simplify add_error_device()
PCI/AER: Convert aer_get_device_error_info(), aer_print_error() to index
PCI/AER: Rename struct aer_stats to aer_info
PCI/AER: Reduce pci_print_aer() correctable error level to KERN_WARNING
PCI/ERR: Add printk level to pcie_print_tlp_log()
PCI/AER: Check log level once and remember it
PCI/AER: Trace error event before ratelimiting
PCI/AER: Update statistics before ratelimiting
PCI/AER: Simplify pci_print_aer()
PCI/AER: Initialize aer_err_info before using it
PCI/AER: Move aer_print_source() earlier in file
PCI/AER: Rename aer_print_port_info() to aer_print_source()
PCI/AER: Extract bus/dev/fn in aer_print_port_info() with PCI_BUS_NUM(), etc
PCI/AER: Consolidate Error Source ID logging in aer_isr_one_error_type()
PCI/AER: Factor COR/UNCOR error handling out from aer_isr_one_error()
PCI/DPC: Log Error Source ID only when valid
PCI/DPC: Initialize aer_err_info before using it
|
|
A PCI device is just another peripheral in a system. So failure to
recover it, must not result in a kernel panic. So remove the TODO which
is quite misleading.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250508-pcie-reset-slot-v4-1-7050093e2b50@linaro.org
|
|
The HAVE_PWRCTRL symbol has been renamed to reflect the pwrctrl framework
name. Switch to the non-deprecated symbol.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250402132634.18065-5-johan+linaro@kernel.org
|
|
The PCI_PWRCTRL_PWRSEQ and HAVE_PWRCTRL symbols have been renamed to
reflect the pwrctrl framework name. Switch to the non-deprecated symbols.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org> # drivers/net/wireless/ath/...
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250402132634.18065-4-johan+linaro@kernel.org
|
|
The PCI_PWRCTRL_PWRSEQ and HAVE_PWRCTRL symbols have been renamed to
reflect the pwrctrl framework name. Switch to the non-deprecated symbols.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org> # drivers/net/wireless/ath/...
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250402132634.18065-3-johan+linaro@kernel.org
|
|
Commits b88cbaaa6fa1 ("PCI/pwrctrl: Rename pwrctl files to pwrctrl") and
3f925cd62874 ("PCI/pwrctrl: Rename pwrctrl functions and structures")
renamed the "pwrctl" framework to "pwrctrl" for consistency reasons.
Rename also the Kconfig symbols so that they reflect the new name while
adding entries for the deprecated ones. The old symbols can be removed once
everything that depends on them has been updated.
Note that no deprecated symbol is added for the new slot driver to avoid
having to add a user visible option.
Rename the new slot module to reflect the framework name and match the
other pwrctrl modules.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250402132634.18065-2-johan+linaro@kernel.org
|
|
It's possible to trigger use-after-free here by:
(a) forcing rescan_work_func() to take a long time and
(b) utilizing a pwrctrl driver that may be unloaded for some reason
Cancel outstanding work to ensure it is finished before we allow our data
structures to be cleaned up.
[bhelgaas: tidy commit log]
Fixes: 8f62819aaace ("PCI/pwrctl: Rescan bus on a separate thread")
Signed-off-by: Brian Norris <briannorris@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Link: https://patch.msgid.link/20250409115313.1.Ia319526ed4ef06bec3180378c9a008340cec9658@changeid
|
|
Allow userspace to read/write log ratelimits per device (including
enable/disable). Create aer/ sysfs directory to store them and any
future AER configs.
The new sysfs files are:
/sys/bus/pci/devices/*/aer/correctable_ratelimit_burst
/sys/bus/pci/devices/*/aer/correctable_ratelimit_interval_ms
/sys/bus/pci/devices/*/aer/nonfatal_ratelimit_burst
/sys/bus/pci/devices/*/aer/nonfatal_ratelimit_interval_ms
The default values are ratelimit_burst=10, ratelimit_interval_ms=5000, so
if we try to emit more than 10 messages in a 5 second period, some are
suppressed.
Update AER sysfs ABI filename to reflect the broader scope of AER sysfs
attributes (e.g. stats and ratelimits).
Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats ->
sysfs-bus-pci-devices-aer
Tested using aer-inject[1]. Configured correctable log ratelimit to 5.
Sent 6 AER errors. Observed 5 errors logged while AER stats
(cat /sys/bus/pci/devices/<dev>/aer_dev_correctable) shows 6.
Disabled ratelimiting and sent 6 more AER errors. Observed all 6 errors
logged and accounted in AER stats (12 total errors).
[1] https://git.kernel.org/pub/scm/linux/kernel/git/gong.chen/aer-inject.git
[bhelgaas: note fatal errors are not ratelimited, "aer_report" ->
"aer_info", replace ratelimit_log_enable toggle with *_ratelimit_interval_ms]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-21-helgaas@kernel.org
|
|
Add ratelimits section for rationale and defaults.
[bhelgaas: note fatal errors are not ratelimited]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://patch.msgid.link/20250522232339.1525671-20-helgaas@kernel.org
|
|
Spammy devices can flood kernel logs with AER errors and slow/stall
execution. Add per-device ratelimits for AER correctable and non-fatal
uncorrectable errors that use the kernel defaults (10 per 5s). Logging of
fatal errors is not ratelimited.
There are two AER logging entry points:
- aer_print_error() is used by DPC and native AER
- pci_print_aer() is used by GHES and CXL
The native AER aer_print_error() case includes a loop that may log details
from multiple devices, which are ratelimited individually. If we log
details for any device, we also log the Error Source ID from the Root Port
or RCEC.
If no such device details are found, we still log the Error Source from the
ERR_* Message, ratelimited by the Root Port or RCEC that received it.
The DPC aer_print_error() case is not ratelimited, since this only happens
for fatal errors.
The CXL pci_print_aer() case is ratelimited by the Error Source device.
The GHES pci_print_aer() case is via aer_recover_work_func(), which
searches for the Error Source device. If the device is not found, there's
no per-device ratelimit, so we use a system-wide ratelimit that covers all
error types (correctable, non-fatal, and fatal).
Sargun at Meta reported internally that a flood of AER errors causes RCU
CPU stall warnings and CSD-lock warnings.
Tested using aer-inject[1]. Sent 11 AER errors. Observed 10 errors logged
while AER stats (cat /sys/bus/pci/devices/<dev>/aer_dev_correctable) show
true count of 11.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/gong.chen/aer-inject.git
[bhelgaas: commit log, factor out trace_aer_event() and aer_print_rp_info()
changes to previous patches, enable Error Source logging if any downstream
detail will be printed, don't ratelimit fatal errors, "aer_report" ->
"aer_info", "cor_log_ratelimit" -> "correctable_ratelimit",
"uncor_log_ratelimit" -> "nonfatal_ratelimit"]
Reported-by: Sargun Dhillon <sargun@meta.com>
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-19-helgaas@kernel.org
|
|
Return -ENOSPC error early so the usual path through add_error_device() is
the straightline code.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-18-helgaas@kernel.org
|
|
Previously aer_get_device_error_info() and aer_print_error() took a pointer
to struct aer_err_info and a pointer to a pci_dev. Typically the pci_dev
was one of the elements of the aer_err_info.dev[] array (DPC was an
exception, where the dev[] array was unused).
Convert aer_get_device_error_info() and aer_print_error() to take an index
into the aer_err_info.dev[] array instead. A future patch will add
per-device ratelimit information, so the index makes it convenient to find
the ratelimit associated with the device.
To accommodate DPC, set info->dev[0] to the DPC port before using these
interfaces.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-17-helgaas@kernel.org
|
|
Update name to reflect the broader definition of structs/variables that are
stored (e.g. ratelimits). This is a preparatory patch for adding rate limit
support.
[bhelgaas: "aer_report" -> "aer_info"]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-16-helgaas@kernel.org
|
|
Some existing logs in pci_print_aer() log with error severity by default.
Convert them to use KERN_WARNING for correctable errors and KERN_ERR for
uncorrectable errors.
[bhelgaas: commit log]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-15-helgaas@kernel.org
|
|
aer_print_error() produces output at a printk level (KERN_ERR/KERN_WARNING/
etc) that depends on the kind of error, and it calls pcie_print_tlp_log(),
which previously always produced output at KERN_ERR.
Add a "level" parameter so aer_print_error() can control the level of the
pcie_print_tlp_log() output to match.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-14-helgaas@kernel.org
|
|
When reporting an AER error, we check its type multiple times to determine
the log level for each message. Do this check only in the top-level
functions (aer_isr_one_error(), pci_print_aer()) and save the level in
struct aer_err_info.
[bhelgaas: save log level in struct aer_err_info instead of passing it
as a parameter]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-13-helgaas@kernel.org
|
|
As with the AER statistics, we always want to emit trace events, even if
the actual dmesg logging is rate limited.
Call trace_aer_event() immediately after pci_dev_aer_stats_incr() so both
happen before ratelimiting.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-12-helgaas@kernel.org
|
|
There are two AER logging entry points:
- aer_print_error() is used by DPC (dpc_process_error()) and native AER
handling (aer_process_err_devices()).
- pci_print_aer() is used by GHES (aer_recover_work_func()) and CXL
(cxl_handle_rdport_errors())
Both use __aer_print_error() to print the AER error bits. Previously
__aer_print_error() also incremented the AER statistics via
pci_dev_aer_stats_incr().
Call pci_dev_aer_stats_incr() early in the entry points instead of in
__aer_print_error() so we update the statistics even if the actual printing
of error bits is rate limited by a future change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-11-helgaas@kernel.org
|
|
Simplify pci_print_aer() by initializing the struct aer_err_info "info"
with a designated initializer list (it was previously initialized with
memset()) and using pci_name().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-10-helgaas@kernel.org
|
|
Previously the struct aer_err_info "e_info" was allocated on the stack
without being initialized, so it contained junk except for the fields we
explicitly set later.
Initialize "e_info" at declaration with a designated initializer list,
which initializes the other members to zero.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-9-helgaas@kernel.org
|
|
Move aer_print_source() earlier in the file so a future change can use it
from aer_print_error(), where it's easier to rate limit it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-8-helgaas@kernel.org
|
|
Rename aer_print_port_info() to aer_print_source() to be more descriptive.
This logs the Error Source ID logged by a Root Port or Root Complex Event
Collector when it receives an ERR_COR, ERR_NONFATAL, or ERR_FATAL Message.
[bhelgaas: aer_print_rp_info() -> aer_print_source()]
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-7-helgaas@kernel.org
|
|
Use PCI_BUS_NUM(), PCI_SLOT(), PCI_FUNC() to extract the bus number,
device, and function number directly from the Error Source ID. There's no
need to shift and mask it explicitly.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-6-helgaas@kernel.org
|
|
Previously we decoded the AER Error Source ID in aer_isr_one_error_type(),
then again in find_source_device() if we didn't find any devices with
errors logged in their AER Capabilities.
Consolidate this so we only decode and log the Error Source ID once in
aer_isr_one_error_type(). Add a "found" parameter so we can add a note
when we didn't find any downstream devices with errors logged in their AER
Capability.
This changes the dmesg logging when we found no devices with errors logged:
- pci 0000:00:01.0: AER: Correctable error message received from 0000:02:00.0
- pci 0000:00:01.0: AER: found no error details for 0000:02:00.0
+ pci 0000:00:01.0: AER: Correctable error message received from 0000:02:00.0 (no details found)
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-5-helgaas@kernel.org
|
|
aer_isr_one_error() duplicates the Error Source ID logging and AER error
processing for Correctable Errors and Uncorrectable Errors. Factor out the
duplicated code to aer_isr_one_error_type().
aer_isr_one_error() doesn't need the struct aer_rpc pointer, so pass it the
Root Port or RCEC pci_dev pointer instead.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-4-helgaas@kernel.org
|
|
DPC Error Source ID is only valid when the DPC Trigger Reason indicates
that DPC was triggered due to reception of an ERR_NONFATAL or ERR_FATAL
Message (PCIe r6.0, sec 7.9.14.5).
When DPC was triggered by ERR_NONFATAL (PCI_EXP_DPC_STATUS_TRIGGER_RSN_NFE)
or ERR_FATAL (PCI_EXP_DPC_STATUS_TRIGGER_RSN_FE) from a downstream device,
log the Error Source ID (decoded into domain/bus/device/function). Don't
print the source otherwise, since it's not valid.
For DPC trigger due to reception of ERR_NONFATAL or ERR_FATAL, the dmesg
logging changes:
- pci 0000:00:01.0: DPC: containment event, status:0x000d source:0x0200
- pci 0000:00:01.0: DPC: ERR_FATAL detected
+ pci 0000:00:01.0: DPC: containment event, status:0x000d, ERR_FATAL received from 0000:02:00.0
and when DPC triggered for other reasons, where DPC Error Source ID is
undefined, e.g., unmasked uncorrectable error:
- pci 0000:00:01.0: DPC: containment event, status:0x0009 source:0x0200
- pci 0000:00:01.0: DPC: unmasked uncorrectable error detected
+ pci 0000:00:01.0: DPC: containment event, status:0x0009: unmasked uncorrectable error detected
Previously the "containment event" message was at KERN_INFO and the
"%s detected" message was at KERN_WARNING. Now the single message is at
KERN_WARNING.
Fixes: 26e515713342 ("PCI: Add Downstream Port Containment driver")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-3-helgaas@kernel.org
|
|
Previously the struct aer_err_info "info" was allocated on the stack
without being initialized, so it contained junk except for the fields we
explicitly set later.
Initialize "info" at declaration so it starts as all zeros.
Fixes: 8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-2-helgaas@kernel.org
|
|
In the pci_acpi_scan_root() function, when creating a PCI bus fails,
we need to free up the previously allocated memory, which can avoid
invalid memory usage and save resources.
Fixes: 789befdfa389 ("arm64: PCI: Migrate ACPI related functions to pci-acpi.c")
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250430060603.381504-1-qiaozhe@iscas.ac.cn
|
|
The subsystem-internal header pci.h still contains the function
prototype of pcim_intx(), which has since been made public in the global
header.
Remove the redundant function prototype.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250522084626.150148-2-phasta@kernel.org
|
|
pci/iomap.c still contains warnings about those functions not behaving
in a managed manner if pcim_enable_device() was called. Since all hybrid
behavior that users could know about has been removed by now, those
explicit warnings are no longer necessary.
Remove the hybrid-devres usage warnings from the kernel-doc.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-8-phasta@kernel.org
|
|
When the demangling of the hybrid devres functions within PCI was
implemented, it was necessary to implement several PCI functions a
second time to avoid cyclic calls, since the hybrid functions in pci.c
call the managed functions in devres.c, which in turn can be directly
used outside of PCI and needed request infrastructure, too.
Therefore, __pcim_request_region_range(), __pci_release_region_range()
and wrappers around them were implemented.
The hybrid nature has recently been removed from all functions in pci.c.
Therefore, the functions in devres.c can now directly use their
counterparts in pci.c without causing a call-cycle.
Remove __pcim_request_region_range(), __pcim_request_region_range() and
the wrappers. Use the corresponding request functions from pci.c in
devres.c
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-7-phasta@kernel.org
|
|
pcim_request_region_exclusive(), the only user in PCI devres that needed
exclusive region requests, has been removed.
All features related to exclusive requests can, therefore, be removed,
too. Remove them.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-6-phasta@kernel.org
|
|
pcim_request_region_exclusive() was only needed for redirecting the
relatively exotic exclusive request functions in pci.c in case of them
operating in managed mode.
The managed nature has been removed from those functions and no one else
uses pcim_request_region_exclusive().
Remove pcim_request_region_exclusive().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-5-phasta@kernel.org
|
|
pcim_enable_device() is not related anymore to switching the mode of
operation of any functions. It merely sets up a devres callback for
automatically disabling the PCI device on driver detach.
Adjust the function's documentation.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-4-phasta@kernel.org
|
|
All functions based on __pci_request_region() and its release counter
part support "hybrid mode", where the functions become managed if the
PCI device was enabled with pcim_enable_device().
Removing this undesirable feature requires to remove all users who
activated their device with that function and use one of the affected
request functions.
These users were:
ASoC
alsa
cardreader
cirrus
i2c
mmc
mtd
mtd
mxser
net
spi
vdpa
vmwgfx
all of which have been ported to always-managed pcim_ functions by now.
The hybrid nature can, thus, be removed from the aforementioned PCI
functions.
Remove all function guards and documentation in pci.c related to the
hybrid redirection. Adjust the visibility of pcim_release_region().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-3-phasta@kernel.org
|
|
PCIe Link Retraining can alter Link Speed. pcie_retrain_link() that
performs the Link Training is called from bwctrl and ASPM driver.
While bwctrl listens for Link Bandwidth Management Status (LBMS) to
pick up changes in Link Speed, there is a race between
pcie_reset_lbms() clearing LBMS after the Link Training and
pcie_bwnotif_irq() reading the Link Status register. If LBMS is already
cleared when the irq handler reads the register, the interrupt handler
will return early with IRQ_NONE and won't update the Link Speed.
When Link Speed update originates from bwctrl,
pcie_bwctrl_change_speed() ensures Link Speed is updated after the
retraining. ASPM driver, however, calls pcie_retrain_link() but does
not update the Link Speed after retraining which can result in stale
Link Speed. Also, it is possible to have ASPM support with
CONFIG_PCIEPORTBUS=n in which case bwctrl will not be built in (and
thus won't update the Link Speed at all).
To ensure Link Speed is not left stale after Link Training, move the
call to pcie_update_link_speed() from pcie_bwctrl_change_speed() into
pcie_retrain_link().
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/linux-pci/aBCjpfyYmlkJ12AZ@wunner.de
Link: https://lore.kernel.org/r/20250514132821.15705-1-ilpo.jarvinen@linux.intel.com
|
|
Since commit 58d9a38f6fac ("PCI: Skip attaching driver in device_add()"),
PCI enumeration is split into two steps: In the first step, all devices
are published in sysfs with device_add(). In the second step, drivers are
bound to the devices with device_attach(). To delay driver binding until
the second step, a "bool match_driver" in struct pci_dev is used.
Instead of a bool, use a bit in the "unsigned long priv_flags" to shrink
struct pci_dev a little and prevent use of the bool outside the PCI core
(as has happened with commit cbbc00be2ce3 ("iommu/amd: Prevent binding
other PCI drivers to IOMMU PCI devices")).
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/d22a9e5b81d6bd8dd1837607d6156679b3b1199c.1745572340.git.lukas@wunner.de
|
|
Commit 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and
pcibios_free_irq()") changed IRQ handling on PCI driver probing.
It inadvertently broke resume from system sleep on AMD platforms:
https://lore.kernel.org/r/20150926164651.GA3640@pd.tnic/
This was fixed by two independent commits:
* 8affb487d4a4 ("x86/PCI: Don't alloc pcibios-irq when MSI is enabled")
* cbbc00be2ce3 ("iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices")
The breaking change and one of these two fixes were subsequently reverted:
* fe25d078874f ("Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled"")
* 6c777e8799a9 ("Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"")
This rendered the second fix unnecessary, so revert it as well. It used
the match_driver flag in struct pci_dev, which is internal to the PCI core
and not supposed to be touched by arbitrary drivers.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://patch.msgid.link/9a3ddff5cc49512044f963ba0904347bd404094d.1745572340.git.lukas@wunner.de
|
|
PCIe BW controller counted LBMS assertions for the purposes of the Target
Speed quirk (pcie_failed_link_retrain()). It was also a plan to expose the
LBMS count through sysfs to allow better diagnosing link related issues.
Lukas Wunner suggested, however, that adding a trace event would be better
for diagnostics purposes, leaving only pcie_failed_link_retrain() as a user
of the lbms_count.
The logic in pcie_failed_link_retrain() does not require keeping count of
LBMS assertions, so replace lbms_count with a simple flag in pci_dev's
priv_flags. The reduced complexity allows removing pcie_bwctrl_lbms_rwsem.
Since pcie_failed_link_retrain() runs before bwctrl is probed during boot,
the LBMS in Link Status register still has to be checked by the quirk.
The priv_flags numbering is not continuous because hotplug code added a few
flags to fill numbers 4-5 (hotplug and bwctrl changes are routed through in
different branches).
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: squashed a fix to resolve build failures from
https://lore.kernel.org/all/20250508090036.1528-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20250422115548.1483-1-ilpo.jarvinen@linux.intel.com
|
|
AMD BIOS team has root caused an issue that NVMe storage failed to come
back from suspend to a lack of a call to _REG when NVMe device was probed.
112a7f9c8edbf ("PCI/ACPI: Call _REG when transitioning D-states") added
support for calling _REG when transitioning D-states, but this only works
if the device actually "transitions" D-states.
967577b062417 ("PCI/PM: Keep runtime PM enabled for unbound PCI devices")
added support for runtime PM on PCI devices, but never actually
'explicitly' sets the device to D0.
To make sure that devices are in D0 and that platform methods such as
_REG are called, explicitly set all devices into D0 during initialization.
Fixes: 967577b062417 ("PCI/PM: Keep runtime PM enabled for unbound PCI devices")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Denis Benato <benato.denis96@gmail.com>
Tested-By: Yijun Shen <Yijun_Shen@Dell.com>
Tested-By: David Perry <david.perry@amd.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/20250424043232.1848107-1-superm1@kernel.org
|
|
We can get different results probing reset methods for a device depending
on its power state. For example, reading the PM control register of a
device in D3cold will always indicate NoSoftRst+ because we get ~0 data
when the config read fails on PCI, preventing us from correctly probing PM
reset support.
Increment the PM usage counter before any probes and use the cleanup __free
facility to automatically drop the usage counter out of scope.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250422230534.2295291-3-alex.williamson@redhat.com
|
|
Define a cleanup helper for use with __free to automatically drop the
device usage count when the pointer goes out of scope.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/20250422230534.2295291-2-alex.williamson@redhat.com
|
