| Age | Commit message (Collapse) | Author |
|---|
|
In one of the error paths of the device_for_each_child_node() loop
in hns_mac_init, add missing call to fwnode_handle_put.
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Guangbin Huang says:
====================
net: hns3: add some fixes for -net
This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, there are some querying mailboxes sent from VF to PF,
and VF will wait the PF's handling result. For mailbox
HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail
when the input parameter is invalid, but the prototype of their
handler function is void. In this case, PF always return success
to VF, which may cause the VF get incorrect result.
Fixes it by adding return value for these function.
Fixes: 63b1279d9905 ("net: hns3: check queue id range before using")
Fixes: 532cfc0df1e4 ("net: hns3: add a check for index in hclge_get_rss_key()")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add validity check for message data length in function
hclge_send_mbx_msg(), avoid unexpected overflow.
Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if
ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to
return -EINVAL for the invalid parameter case.
So this patch fixes it by return -EINVAL in this abnormal branch.
Fixes: 5d02a58dae60 ("net: hns3: fix for buffer overflow smatch warning")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The comments in function hclge_comm_tqps_update_stats is not right,
so fix it.
Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse")
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For debugfs node rx/tx_queue_info and rx/tx_bd_info, their output info is
aligned to the right, it's not aligned with output of other debugfs node,
so uniform their output info.
Fixes: 907676b13071 ("net: hns3: use tx bounce buffer for small packets")
Fixes: e44c495d95e0 ("net: hns3: refactor queue info of debugfs")
Fixes: 77e9184869c9 ("net: hns3: refactor dump bd info of debugfs")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If failed to register netdev, it needs to clear INITED state and stop
client in case of cause problem when concurrency with uninitialized
process of driver.
Fixes: a289a7e5c1d4 ("net: hns3: put off calling register_netdev() until client initialize complete")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect printing of memory size of IPVS connection hash table,
from Pengcheng Yang.
2) Fix spurious EEXIST errors in nft_set_rbtree.
3) Remove leftover empty flowtable file, from Rongguang Wei.
4) Fix ip6_route_me_harder() with vrf driver, from Martin Willi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit a48b73eca4ce ("btrfs: fix potential deadlock in the search
ioctl") addressed a lockdep warning by pre-faulting the user pages and
attempting the copy_to_user_nofault() in an infinite loop. On
architectures like arm64 with MTE, an access may fault within a page at
a location different from what fault_in_writeable() probed. Since the
sk_offset is rewound to the previous struct btrfs_ioctl_search_header
boundary, there is no guaranteed forward progress and search_ioctl() may
live-lock.
Use fault_in_subpage_writeable() instead of fault_in_writeable() to
ensure the permission is checked at the right granularity (smaller than
PAGE_SIZE).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: a48b73eca4ce ("btrfs: fix potential deadlock in the search ioctl")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220423100751.1870771-4-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
With MTE, even if the pte allows an access, a mismatched tag somewhere
within a page can still cause a fault. Select ARCH_HAS_SUBPAGE_FAULTS if
MTE is enabled and implement the probe_subpage_writeable() function.
Note that get_user() is sufficient for the writeable MTE check since the
same tag mismatch fault would be triggered by a read. The caller of
probe_subpage_writeable() will need to check the pte permissions
(put_user, GUP).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220423100751.1870771-3-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
On hardware with features like arm64 MTE or SPARC ADI, an access fault
can be triggered at sub-page granularity. Depending on how the
fault_in_writeable() function is used, the caller can get into a
live-lock by continuously retrying the fault-in on an address different
from the one where the uaccess failed.
In the majority of cases progress is ensured by the following
conditions:
1. copy_to_user_nofault() guarantees at least one byte access if the
user address is not faulting.
2. The fault_in_writeable() loop is resumed from the first address that
could not be accessed by copy_to_user_nofault().
If the loop iteration is restarted from an earlier (initial) point, the
loop is repeated with the same conditions and it would live-lock.
Introduce an arch-specific probe_subpage_writeable() and call it from
the newly added fault_in_subpage_writeable() function. The arch code
with sub-page faults will have to implement the specific probing
functionality.
Note that no other fault_in_subpage_*() functions are added since they
have no callers currently susceptible to a live-lock.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20220423100751.1870771-2-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The commit referenced below fixed packet re-routing if Netfilter mangles
a routing key property of a packet and the packet is routed in a VRF L3
domain. The fix, however, addressed IPv4 re-routing, only.
This commit applies the same behavior for IPv6. While at it, untangle
the nested ternary operator to make the code more readable.
Fixes: 6d8b49c3a3a3 ("netfilter: Update ip_route_me_harder to consider L3 domain")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Willi <martin@strongswan.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The request will be inserted into the ci->i_unsafe_dirops before
assigning the req->r_session, so it's possible that we will hit
NULL pointer dereference bug here.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/55327
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Once the session is opened the s->s_ttl will be set, and when receiving
a new mdsmap and the MDS map is changed, it will be possibly will close
some sessions and open new ones. And then some sessions will be in
CLOSING state evening without unmounting.
URL: https://tracker.ceph.com/issues/54979
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
ceph_add_cap says in its function documentation that the caller should
hold the read lock on the session snap_rwsem. Furthermore, not only
ceph_add_cap needs that lock, when it calls to ceph_lookup_snap_realm it
eventually calls ceph_get_snap_realm which states via lockdep that
snap_rwsem needs to be held. handle_cap_export calls ceph_add_cap
without that mdsc->snap_rwsem held. Thus, since ceph_get_snap_realm
and ceph_add_cap both need the lock, the common place to acquire that
lock is inside handle_cap_export.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Warning on every translated mtd partition results in excessive log noise
if this driver is loaded:
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
nand: Macronix MX30LF1G18AC
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
read_bbt: found bbt at block 1023
10 fixed-partitions partitions found on MTD device mt7621-nand
Creating 10 MTD partitions on "mt7621-nand":
0x000000000000-0x000000080000 : "Bootloader"
mtdblock: MTD device 'Bootloader' is NAND, please consider using UBI block devices instead.
0x000000080000-0x000000100000 : "Config"
mtdblock: MTD device 'Config' is NAND, please consider using UBI block devices instead.
0x000000100000-0x000000140000 : "Factory"
mtdblock: MTD device 'Factory' is NAND, please consider using UBI block devices instead.
0x000000140000-0x000002000000 : "Kernel"
mtdblock: MTD device 'Kernel' is NAND, please consider using UBI block devices instead.
0x000000540000-0x000002000000 : "ubi"
mtdblock: MTD device 'ubi' is NAND, please consider using UBI block devices instead.
0x000002140000-0x000004000000 : "Kernel2"
mtdblock: MTD device 'Kernel2' is NAND, please consider using UBI block devices instead.
0x000004000000-0x000004100000 : "wwan"
mtdblock: MTD device 'wwan' is NAND, please consider using UBI block devices instead.
0x000004100000-0x000005100000 : "data"
mtdblock: MTD device 'data' is NAND, please consider using UBI block devices instead.
0x000005100000-0x000005200000 : "rom-d"
mtdblock: MTD device 'rom-d' is NAND, please consider using UBI block devices instead.
0x000005200000-0x000005280000 : "reserve"
mtdblock: MTD device 'reserve' is NAND, please consider using UBI block devices instead.
mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
This is more likely to annoy than to help users of embedded distros where
this driver is enabled by default. Making the blockdevs available does
not imply that they are in use, and warning about bootloader partitions
or other devices which obviously never will be mounted is more confusing
than helpful.
Move the warning to open(), where it will be of more use - actually warning
anyone who mounts a file system on NAND using mtdblock.
Fixes: e07403a8c6be ("mtdblock: Warn if added for a NAND device")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220328161108.87757-1-bjorn@mork.no
|
|
Allow phram to be probed from the devicetree. It expects to be in a
reserved-memory node as documented by the bindings. This allows things
like partitioning to be specified via the devicetree.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220412135302.1682890-4-vincent.whitchurch@axis.com
|
|
Add bindings to allow MTD/block devices to be used in reserved-memory
regions using the "phram" (MTD in PHysical RAM) driver.
This allows things like partitioning to be specified via the existing
devicetree bindings.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220412135302.1682890-3-vincent.whitchurch@axis.com
|
|
Allow the MTD index to be specified via a devicetree alias, so that the
number does not just depend on probe order. This is useful to allow
pseudo-devices like phram to be optionally used on systems, without
having this affect the numbering of the real hardware MTD devices.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220412135302.1682890-2-vincent.whitchurch@axis.com
|
|
After conversion the jedec,spi-nor DT schema to reference other schemas
(SPI and MTD) and use unevaluatedProperties, few properties are
redundant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220408063720.12826-1-krzysztof.kozlowski@linaro.org
|
|
This custom maps driver was never used with the device tree
enabled IXP4xx systems, which use the physmap add-on from
commit 2aba2f2a704d
("mtd: physmap_of: add a hook for Intel IXP4xx flash probing")
Since kernel v5.18-rc1 IXP4xx is only booting from the device
tree so drop this old driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220407210844.2489682-1-linus.walleij@linaro.org
|
|
CONFIG_NF_FLOW_TABLE_IPV4 is already removed and the real user is also
removed(nf_flow_table_ipv4.c is empty).
Fixes: c42ba4290b2147aa ("netfilter: flowtable: remove ipv4/ipv6 modules")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ALSA fireworks driver has a bug in its initial state to return count
shorter than expected by 4 bytes to userspace applications when handling
response frame for Echo Audio Fireworks transaction. It's due to missing
addition of the size for the type of event in ALSA firewire stack.
Fixes: 555e8a8f7f14 ("ALSA: fireworks: Add command/response functionality into hwdep interface")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220424102428.21109-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Lenovo Yoga Duet 7 13ITL6 has Realtek ALC287 and built-in
speakers do not work out of the box. The fix developed for
Yoga 7i 14ITL5 also enables speaker output for this model.
Signed-off-by: Zihao Wang <wzhd@ustc.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220424084120.74125-1-wzhd@ustc.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull FireWire fixes
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
card->local_node and card->bm_retries are both always accessed under
card->lock.
fw_core_handle_bus_reset has a check whose condition depends on
card->local_node and whose body writes to card->bm_retries.
Both of these accesses are not under card->lock. Move the lock acquiring
of card->lock to before this check such that these accesses do happen
when card->lock is held.
fw_destroy_nodes is called inside the check.
Since fw_destroy_nodes already acquires card->lock inside its function
body, move this out to the callsites of fw_destroy_nodes.
Also add a comment to indicate which locking is necessary when calling
fw_destroy_nodes.
Cc: <stable@vger.kernel.org>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220409041243.603210-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Cc: <stable@vger.kernel.org>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220409041243.603210-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
&e->event and e point to the same address, and &e->event could
be freed in queue_event. So there is a potential uaf issue if
we dereference e after calling queue_event(). Fix this by adding
a temporary variable to maintain e->client in advance, this can
avoid the potential uaf issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220409041243.603210-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add conditional atomic operations' optimization:
- arch_atomic_fetch_add_unless
- arch_atomic_inc_unless_negative
- arch_atomic_dec_unless_positive
- arch_atomic_dec_if_positive
Comments by Boqun:
FWIW, you probably need to make sure that a barrier instruction inside
an lr/sc loop is a good thing. IIUC, the execution time of a barrier
instruction is determined by the status of store buffers and invalidate
queues (and probably other stuffs), so it may increase the execution
time of the lr/sc loop, and make it unlikely to succeed. But this really
depends on how the arch executes these instructions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
|
|
The generic atomic.h used cmpxchg to implement the atomic
operations, it will cause daul loop to reduce the forward
guarantee. The patch implement csky custom atomic operations with
ldex/stex instructions for the best performance.
Important comment by Rutland:
8e86f0b409a4 ("arm64: atomics: fix use of acquire + release for
full barrier semantics")
Link: https://lore.kernel.org/linux-riscv/CAJF2gTSAxpAi=LbAdu7jntZRUa=-dJwL0VfmDfBV5MHB=rcZ-w@mail.gmail.com/T/#m27a0f1342995deae49ce1d0e1f2683f8a181d6c3
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
|
|
Optimize cmpxchg with ASM acquire/release fence ASM instructions
instead of previous generic based. Prevent a fence when cmxchg's
first load != old.
Comments by Rutland:
8e86f0b409a4 ("arm64: atomics: fix use of acquire + release for
full barrier semantics")
Comments by Boqun:
FWIW, you probably need to make sure that a barrier instruction inside
an lr/sc loop is a good thing. IIUC, the execution time of a barrier
instruction is determined by the status of store buffers and invalidate
queues (and probably other stuffs), so it may increase the execution
time of the lr/sc loop, and make it unlikely to succeed. But this really
depends on how the arch executes these instructions.
Link: https://lore.kernel.org/linux-riscv/CAJF2gTSAxpAi=LbAdu7jntZRUa=-dJwL0VfmDfBV5MHB=rcZ-w@mail.gmail.com/T/#m27a0f1342995deae49ce1d0e1f2683f8a181d6c3
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
|
|
--------------------------------------------
unreferenced object 0xffff000010742a00 (size 128):
comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000b4dfebaa>] __kmalloc+0x338/0x474
[<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c
[<000000007d6082a0>] platform_probe+0x98/0x11c
[<00000000c990f549>] really_probe+0x234/0x5a0
[<000000002d9fecc6>] __driver_probe_device+0x194/0x224
[<00000000cf0b94fa>] driver_probe_device+0x64/0x13c
[<00000000f238e4cf>] __device_attach_driver+0xf8/0x180
[<000000006720e418>] bus_for_each_drv+0xf8/0x160
[<00000000df4f14f6>] __device_attach+0x174/0x29c
[<00000000782002fb>] device_initial_probe+0x20/0x30
[<00000000c2681b06>] bus_probe_device+0xfc/0x110
[<00000000964cf3bd>] device_add+0x5f0/0xcd0
[<000000004b9264e3>] platform_device_add+0x198/0x390
[<00000000fa82a9d0>] platform_device_register_full+0x178/0x210
[<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168
[<000000000377cc7c>] do_one_initcall+0xe4/0x570
--------------------------------------------
if sun50i_cpufreq_get_efuse failed, then opp_tables leak.
Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Fengping has no longer interest and time to maintain this driver so he
agreed to transfer maintainership over to me.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220421140255.2781505-1-mkorpershoek@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
We have now seen panel (XMG Core 15 e21 laptop) advertizing support
for Intel proprietary eDP backlight control via DPCD registers, but
actually working only with legacy pwm control.
This patch adds panel EDID check for possible HDR static metadata and
Intel proprietary eDP backlight control is used only if that exists.
Missing HDR static metadata is ignored if user specifically asks for
Intel proprietary eDP backlight control via enable_dpcd_backlight
parameter.
v2 :
- Ignore missing HDR static metadata if Intel proprietary eDP
backlight control is forced via i915.enable_dpcd_backlight
- Printout info message if panel is missing HDR static metadata and
support for Intel proprietary eDP backlight control is detected
Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5284
Cc: Lyude Paul <lyude@redhat.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Filippo Falezza <filippo.falezza@outlook.it>
Cc: stable@vger.kernel.org
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413082826.120634-1-jouni.hogander@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit b4b157577cb1de13bee8bebc3576f1de6799a921)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Commit 428cb15d5b00 ("drm/i915: Clean up pre-skl primary plane registers")
introduced DISP_POS_Y and DISP_HEIGHT defines but accidentally set these
their masks to REG_GENMASK(31, 0) instead of REG_GENMASK(31, 16).
This breaks the primary display pane on at least pineview machines, fix
the mask to fix the primary display pane only showing black.
Tested on an Acer One AO532h with an Intel N450 SoC.
Fixes: 428cb15d5b00 ("drm/i915: Clean up pre-skl primary plane registers")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220418150936.5499-1-hdegoede@redhat.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 681f8a5c6e372dbfd2a313ace417e7749543de1d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Move common error-handling to io_req_complete, so that various callers
avoid repeating that. Few callers (io_tee, io_splice) require slightly
different handling. These are changed to use __io_req_complete instead.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220422101048.419942-1-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Supports both regular socket(2) where a normal file descriptor is
instantiated when called, or direct descriptors.
Link: https://lore.kernel.org/r/20220412202240.234207-3-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This works like __sys_socket(), except instead of allocating and
returning a socket fd, it just returns the file associated with the
socket. No fd is installed into the process file table.
This is similar to do_accept(), and allows io_uring to use this without
instantiating a file descriptor in the process file table.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/r/20220412202240.234207-2-axboe@kernel.dk
|
|
__pad2 is only 1 u64 now, the other one is addr3. Adjust the trace so
that it matches up.
Fixes: a56834e0fafe ("io_uring: add fgetxattr and getxattr support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds support to io_uring for the fgetxattr and getxattr API.
Signed-off-by: Stefan Roesch <shr@fb.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220323154420.3301504-5-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds support to io_uring for the fsetxattr and setxattr API.
Signed-off-by: Stefan Roesch <shr@fb.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20220323154420.3301504-4-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This splits off do_getxattr function from the getxattr function. This will
allow io_uring to call it from its io worker.
Signed-off-by: Stefan Roesch <shr@fb.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20220323154420.3301504-3-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This splits of the setup part of the function setxattr in its own
dedicated function called setxattr_copy. In addition it also exposes a new
function called do_setxattr for making the setxattr call.
This makes it possible to call these two functions from io_uring in the
processing of an xattr request.
Signed-off-by: Stefan Roesch <shr@fb.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20220323154420.3301504-2-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Right now io_uring will not actively inform userspace if a CQE is
dropped. This is extremely rare, requiring a CQ ring overflow, as well as
a GFP_ATOMIC kmalloc failure. However the consequences could cause for
example applications to go into an undefined state, possibly waiting for a
CQE that never arrives.
Return an error code (EBADR) in these cases. Since this is expected to be
incredibly rare, try and avoid as much as possible affecting the hot code
paths, and so it only is returned lazily and when there is no other
available CQEs.
Once the error is returned, reset the error condition assuming the user is
either ok with it or will clean up appropriately.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220421091345.2115755-6-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare to use this bitfield for more flags by using constants instead of
magic value 0
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220421091345.2115755-5-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring_enter returns the count submitted preferrably over an error
code. In some code paths this check is not required, so reorganise the
code so that the check is only done as needed.
This is also a prep for returning error codes only in waiting scenarios.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220421091345.2115755-4-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Trace cqe overflows in io_uring. Print ocqe before the check, so if it is
NULL it indicates that it has been dropped.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220421091345.2115755-3-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add trace function for overflowing CQ ring.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220421091345.2115755-2-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
