| Age | Commit message (Collapse) | Author |
|---|
|
Currently PTP cyclecounter and timecounter are initialized only on
the first probing and are cleaned up during removal. This means that
PTP becomes non-functional after device recovery.
Fix this by unconditional PTP initialization on probing and clearing
Tx pending bit on exiting.
Fixes: ccc67ef50b90 ("qede: Error recovery process")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is likely a copy'n'paste mistake. The amount of ILT lines to
reserve for a single VF was being multiplied by the total VFs count.
This led to a huge redundancy in reservation and potential lines
drainouts.
Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
25ms sleep cycles in waiting for PF response are excessive and may lead
to different timeout failures.
Start to wait with short udelays, and in most cases polling will end
here. If the time was not sufficient, switch to msleeps.
usleep_range() may go far beyond 100us depending on platform and tick
configuration, hence atomic udelays for consistency.
Also add explicit DMA barriers since 'done' always comes from a shared
request-response DMA pool, and note that in the comment nearby.
Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set rdma_wq pointer to NULL after destroying the workqueue and check
for it when adding new events to fix crashes on driver unload.
Fixes: cee9fbd8e2e9 ("qede: Add qedr framework")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qed_spq_unregister_async_cb() should be called before
qed_rdma_info_free() to avoid crash-spawning uses-after-free.
Instead of calling it from each subsystem exit code, do it in one place
on PF down.
Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qed_chain_get_element_left{,_u32} returned 0 when the difference
between producer and consumer page count was equal to the total
page count.
Fix this by conditional expanding of producer value (vs
unconditional). This allowed to eliminate normalizaton against
total page count, which was the cause of this bug.
Misc: replace open-coded constants with common defines.
Fixes: a91eb52abb50 ("qed: Revisit chain implementation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit e585f2363637 ("udp: Changes to udp_offload to support remote
checksum offload") added new GSO type and a corresponding netdev
feature, but missed Ethtool's 'netdev_features_strings' table.
Give it a name so it will be exposed to userspace and become available
for manual configuration.
v3:
- decouple from "netdev_features_strings[] cleanup" series;
- no functional changes.
v2:
- don't split the "Fixes:" tag across lines;
- no functional changes.
Fixes: e585f2363637 ("udp: Changes to udp_offload to support remote checksum offload")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jason A. Donenfeld says:
====================
wireguard fixes for 5.8-rc3
This series contains two fixes, one cosmetic and one quite important:
1) Avoid the `if ((x = f()) == y)` pattern, from Frank
Werner-Krippendorf.
2) Mitigate a potential memory leak by creating circular netns
references, while also making the netns semantics a bit more
robust.
Patch (2) has a "Fixes:" line and should be backported to stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before, we took a reference to the creating netns if the new netns was
different. This caused issues with circular references, with two
wireguard interfaces swapping namespaces. The solution is to rather not
take any extra references at all, but instead simply invalidate the
creating netns pointer when that netns is deleted.
In order to prevent this from happening again, this commit improves the
rough object leak tracking by allowing it to account for created and
destroyed interfaces, aside from just peers and keys. That then makes it
possible to check for the object leak when having two interfaces take a
reference to each others' namespaces.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes an error condition reported by checkpatch.pl which caused by
assigning a variable in an if condition in wg_noise_handshake_consume_
initiation().
Signed-off-by: Frank Werner-Krippendorf <mail@hb9fxq.ch>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Horatiu Vultur says:
====================
bridge: mrp: Update MRP_PORT_ROLE
This patch series does the following:
- fixes the enum br_mrp_port_role_type. It removes the port role none(0x2)
because this is in conflict with the standard. The standard defines the
interconnect port role as value 0x2.
- adds checks regarding current defined port roles: primary(0x0) and
secondary(0x1).
v2:
- add the validation code when setting the port role.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds specific checks for primary(0x0) and secondary(0x1) when
setting the port role. For any other value the function
'br_mrp_set_port_role' will return -EINVAL.
Fixes: 20f6a05ef63594 ("bridge: mrp: Rework the MRP netlink interface")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the MRP_PORT_ROLE_NONE has the value 0x2 but this is in conflict
with the IEC 62439-2 standard. The standard defines the following port
roles: primary (0x0), secondary(0x1), interconnect(0x2).
Therefore remove the port role none.
Fixes: 4714d13791f831 ("bridge: uapi: mrp: Add mrp attributes.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Keepalived can set global static ip routes or virtual ip routes dynamically
following VRRP protocol states. Using a dedicated rtm_protocol will help
keeping track of it.
Changes in v2:
- fix tab/space indenting
Signed-off-by: Alexandre Cassen <acassen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"All bugfixes except for a couple cleanup patches"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Remove vcpu_vmx's defunct copy of host_pkru
KVM: x86: allow TSC to differ by NTP correction bounds without TSC scaling
KVM: X86: Fix MSR range of APIC registers in X2APIC mode
KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL
KVM: nVMX: Plumb L2 GPA through to PML emulation
KVM: x86/mmu: Avoid mixing gpa_t with gfn_t in walk_addr_generic()
KVM: LAPIC: ensure APIC map is up to date on concurrent update requests
kvm: lapic: fix broken vcpu hotplug
Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU"
KVM: VMX: Add helpers to identify interrupt type from intr_info
kvm/svm: disable KCSAN for svm_vcpu_run()
KVM: MIPS: Fix a build error for !CPU_LOONGSON64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A number of fixes, located in two areas, one performance fix and one
fixup for better integration with another patchset.
- bug fixes in nowait aio:
- fix snapshot creation hang after nowait-aio was used
- fix failure to write to prealloc extent past EOF
- don't block when extent range is locked
- block group fixes:
- relocation failure when scrub runs in parallel
- refcount fix when removing fails
- fix race between removal and creation
- space accounting fixes
- reinstante fast path check for log tree at unlink time, fixes
performance drop up to 30% in REAIM
- kzfree/kfree fixup to ease treewide patchset renaming kzfree"
* tag 'for-5.8-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: use kfree() in btrfs_ioctl_get_subvol_info()
btrfs: fix RWF_NOWAIT writes blocking on extent locks and waiting for IO
btrfs: fix RWF_NOWAIT write not failling when we need to cow
btrfs: fix failure of RWF_NOWAIT write into prealloc extent beyond eof
btrfs: fix hang on snapshot creation after RWF_NOWAIT write
btrfs: check if a log root exists before locking the log_mutex on unlink
btrfs: fix bytes_may_use underflow when running balance and scrub in parallel
btrfs: fix data block group relocation failure due to concurrent scrub
btrfs: fix race between block group removal and block group creation
btrfs: fix a block group ref counter leak after failure to remove block group
|
|
Currently the ring buffer makes events that happen in interrupts that preempt
another event have a delta of zero. (Hopefully we can change this soon). But
this is to deal with the races of updating a global counter with lockless
and nesting functions updating deltas.
With the addition of absolute time stamps, the time extend didn't follow
this rule. A time extend can happen if two events happen longer than 2^27
nanoseconds appart, as the delta time field in each event is only 27 bits.
If that happens, then a time extend is injected with 2^59 bits of
nanoseconds to use (18 years). But if the 2^27 nanoseconds happen between
two events, and as it is writing the event, an interrupt triggers, it will
see the 2^27 difference as well and inject a time extend of its own. But a
recent change made the time extend logic not take into account the nesting,
and this can cause two time extend deltas to happen moving the time stamp
much further ahead than the current time. This gets all reset when the ring
buffer moves to the next page, but that can cause time to appear to go
backwards.
This was observed in a trace-cmd recording, and since the data is saved in a
file, with trace-cmd report --debug, it was possible to see that this indeed
did happen!
bash-52501 110d... 81778.908247: sched_switch: bash:52501 [120] S ==> swapper/110:0 [120] [12770284:0x2e8:64]
<idle>-0 110d... 81778.908757: sched_switch: swapper/110:0 [120] R ==> bash:52501 [120] [509947:0x32c:64]
TIME EXTEND: delta:306454770 length:0
bash-52501 110.... 81779.215212: sched_swap_numa: src_pid=52501 src_tgid=52388 src_ngid=52501 src_cpu=110 src_nid=2 dst_pid=52509 dst_tgid=52388 dst_ngid=52501 dst_cpu=49 dst_nid=1 [0:0x378:48]
TIME EXTEND: delta:306458165 length:0
bash-52501 110dNh. 81779.521670: sched_wakeup: migration/110:565 [0] success=1 CPU:110 [0:0x3b4:40]
and at the next page, caused the time to go backwards:
bash-52504 110d... 81779.685411: sched_switch: bash:52504 [120] S ==> swapper/110:0 [120] [8347057:0xfb4:64]
CPU:110 [SUBBUFFER START] [81779379165886:0x1320000]
<idle>-0 110dN.. 81779.379166: sched_wakeup: bash:52504 [120] success=1 CPU:110 [0:0x10:40]
<idle>-0 110d... 81779.379167: sched_switch: swapper/110:0 [120] R ==> bash:52504 [120] [1168:0x3c:64]
Link: https://lkml.kernel.org/r/20200622151815.345d1bf5@oasis.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: dc4e2801d400b ("ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Introduce new resource dump segments - PRM_QUERY_QP,
PRM_QUERY_CQ and PRM_QUERY_MKEY. These segments contains the resource
dump in PRM query format.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Export some of the resource dump API. mlx5_ib driver will use
it in downstream patches.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
We've found Samsung USBC Headset (AKG) (VID: 0x04e8, PID: 0xa051)
need a tiny delay after each class compliant request.
Otherwise the device might not be able to be recognized each times.
Signed-off-by: Chihhao Chen <chihhao.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1592910203-24035-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When specifying insanely large debug buffers a kernel warning is
printed. The debug code does handle the error gracefully, though.
Instead of duplicating the check let us silence the warning to
avoid crashes when panic_on_warn is used.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Currently if early_pgm_check_handler is called it ends up in pgm check
loop. The problem is that early_pgm_check_handler is instrumented by
KASAN but executed without DAT flag enabled which leads to addressing
exception when KASAN checks try to access shadow memory.
Fix that by executing early handlers with DAT flag on under KASAN as
expected.
Reported-and-tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
When single stepping an svc instruction on s390, the kernel is entered
with a PER program check interruption. The program check handler than
jumps to the system call handler by reloading the PSW. The code didn't
set GPR13 to the thread pointer in struct task_struct. This made the
kernel access invalid memory while trying to fetch the syscall function
address. Fix this by always assigned GPR13 after .Lsysc_per.
Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S")
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud
Alpha S (0951:0x16ea) uses two interfaces, but only the second
interface contains the capture stream. This patch delays the
registration until the second interface appears.
Signed-off-by: Christoffer Nielsen <cn@obviux.dk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAOtG2YHOM3zy+ed9KS-J4HkZo_QGzcUG9MigSp4e4_-13r6B=Q@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove vcpu_vmx.host_pkru, which got left behind when PKRU support was
moved to common x86 code.
No functional change intended.
Fixes: 37486135d3a7b ("KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200617034123.25647-1-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Linux TSC calibration procedure is subject to small variations
(its common to see +-1 kHz difference between reboots on a given CPU, for example).
So migrating a guest between two hosts with identical processor can fail, in case
of a small variation in calibrated TSC between them.
Without TSC scaling, the current kernel interface will either return an error
(if user_tsc_khz <= tsc_khz) or enable TSC catchup mode.
This change enables the following TSC tolerance check to
accept KVM_SET_TSC_KHZ within tsc_tolerance_ppm (which is 250ppm by default).
/*
* Compute the variation in TSC rate which is acceptable
* within the range of tolerance and decide if the
* rate being applied is within that bounds of the hardware
* rate. If so, no scaling or compensation need be done.
*/
thresh_lo = adjust_tsc_khz(tsc_khz, -tsc_tolerance_ppm);
thresh_hi = adjust_tsc_khz(tsc_khz, tsc_tolerance_ppm);
if (user_tsc_khz < thresh_lo || user_tsc_khz > thresh_hi) {
pr_debug("kvm: requested TSC rate %u falls outside tolerance [%u,%u]\n", user_tsc_khz, thresh_lo, thresh_hi);
use_scaling = 1;
}
NTP daemon in the guest can correct this difference (NTP can correct upto 500ppm).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20200616114741.GA298183@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Only MSR address range 0x800 through 0x8ff is architecturally reserved
and dedicated for accessing APIC registers in x2APIC mode.
Fixes: 0105d1a52640 ("KVM: x2apic interface to lapic")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix a typo in gue.h
Signed-off-by: Aiden Leong <aiden.leong@aibsd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Igor Russkikh says:
====================
net: atlantic: additional A2 features
This patchset adds more features to A2:
* half duplex rates;
* EEE;
* flow control;
* link partner capabilities reporting;
* phy loopback.
Feature-wise A2 is almost on-par with A1 save for WoL and filtering, which
will be submitted as separate follow-up patchset(s).
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the phy loopback support on A2.
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds link partner capabilities reporting support on A2.
In particular, the following capabilities are available for reporting:
* link rate;
* EEE;
* flow control.
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds flow control support on A2.
Co-developed-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds EEE support on A2.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Co-developed-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes 2.5G baseX wrong usage/reporting, since it shouldn't have
been mixed with baseT.
Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for 10M/100M/1G half duplex rates, which are
supported by A2 in additional to full duplex rates supported by A1.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In RFC 8684, we don't need to send sndr_key in SYN package anymore, so drop
it.
Fixes: cc7972ea1932 ("mptcp: parse and emit MP_CAPABLE option according to v1 spec")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
arg cannot be NULL since its already being dereferenced
before. Remove the redundant NULL check.
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix check in ethtool_rx_flow_rule_create
Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator")
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the mtk_eth_soc driver to use the finalised link parameters in
mac_link_up() rather than the parameters in mac_config().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an interface is being deleted, "/proc/net/dev_snmp6/<interface name>"
is deleted.
The function for this is addrconf_ifdown() in the addrconf_notify() and
it is called by notification, which is NETDEV_UNREGISTER.
But, if NETDEV_CHANGEMTU is triggered after NETDEV_UNREGISTER,
this proc file will be created again.
This recreated proc file will be deleted by netdev_wati_allrefs().
Before netdev_wait_allrefs() is called, creating a new HSR interface
routine can be executed and It tries to create a proc file but it will
find an un-deleted proc file.
At this point, it warns about it.
To avoid this situation, it can use ->dellink() instead of
->ndo_uninit() to release resources because ->dellink() is called
before NETDEV_UNREGISTER.
So, a proc file will not be recreated.
Test commands
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link set dummy0 mtu 1300
#SHELL1
while :
do
ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1
done
#SHELL2
while :
do
ip link del hsr0
done
Splat looks like:
[ 9888.980852][ T2752] proc_dir_entry 'dev_snmp6/hsr0' already registered
[ 9888.981797][ C2] WARNING: CPU: 2 PID: 2752 at fs/proc/generic.c:372 proc_register+0x2d5/0x430
[ 9888.981798][ C2] Modules linked in: hsr dummy veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6x
[ 9888.981814][ C2] CPU: 2 PID: 2752 Comm: ip Tainted: G W 5.8.0-rc1+ #616
[ 9888.981815][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 9888.981816][ C2] RIP: 0010:proc_register+0x2d5/0x430
[ 9888.981818][ C2] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 65 01 00 00 49 8b b5 e0 00 00 00 48 89 ea 40
[ 9888.981819][ C2] RSP: 0018:ffff8880628dedf0 EFLAGS: 00010286
[ 9888.981821][ C2] RAX: dffffc0000000008 RBX: ffff888028c69170 RCX: ffffffffaae09a62
[ 9888.981822][ C2] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f75ac
[ 9888.981823][ C2] RBP: ffff888028c693f4 R08: ffffed100d9401bd R09: ffffed100d9401bd
[ 9888.981824][ C2] R10: ffffffffaddf406f R11: 0000000000000001 R12: ffff888028c69308
[ 9888.981825][ C2] R13: ffff8880663584c8 R14: dffffc0000000000 R15: ffffed100518d27e
[ 9888.981827][ C2] FS: 00007f3876b3b0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[ 9888.981828][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9888.981829][ C2] CR2: 00007f387601a8c0 CR3: 000000004101a002 CR4: 00000000000606e0
[ 9888.981830][ C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9888.981831][ C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9888.981832][ C2] Call Trace:
[ 9888.981833][ C2] ? snmp6_seq_show+0x180/0x180
[ 9888.981834][ C2] proc_create_single_data+0x7c/0xa0
[ 9888.981835][ C2] snmp6_register_dev+0xb0/0x130
[ 9888.981836][ C2] ipv6_add_dev+0x4b7/0xf60
[ 9888.981837][ C2] addrconf_notify+0x684/0x1ca0
[ 9888.981838][ C2] ? __mutex_unlock_slowpath+0xd0/0x670
[ 9888.981839][ C2] ? kasan_unpoison_shadow+0x30/0x40
[ 9888.981840][ C2] ? wait_for_completion+0x250/0x250
[ 9888.981841][ C2] ? inet6_ifinfo_notify+0x100/0x100
[ 9888.981842][ C2] ? dropmon_net_event+0x227/0x410
[ 9888.981843][ C2] ? notifier_call_chain+0x90/0x160
[ 9888.981844][ C2] ? inet6_ifinfo_notify+0x100/0x100
[ 9888.981845][ C2] notifier_call_chain+0x90/0x160
[ 9888.981846][ C2] register_netdevice+0xbe5/0x1070
[ ... ]
Reported-by: syzbot+1d51c8b74efa4c44adeb@syzkaller.appspotmail.com
Fixes: e0a4b99773d3 ("hsr: use upper/lower device infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
Multicast improvement in Ocelot and Felix drivers
This series makes some basic multicast forwarding functionality work for
Felix DSA and for Ocelot switchdev. IGMP/MLD snooping in Felix is still
missing, and there are other improvements to be made in the general area
of multicast address filtering towards the CPU, but let's get these
hardware-specific fixes out of the way first.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current procedure for installing a multicast address is hardcoded
for IPv4. But, in the ocelot hardware, there are 3 different procedures
for IPv4, IPv6 and for regular L2 multicast.
For IPv6 (33-33-xx-xx-xx-xx), it's the same as for IPv4
(01-00-5e-xx-xx-xx), except that the destination port mask is stuffed
into first 2 bytes of the MAC address except into first 3 bytes.
For plain Ethernet multicast, there's no port-in-address stuffing going
on, instead the DEST_IDX (pointer to PGID) is used there, just as for
unicast. So we have to use one of the nonreserved multicast PGIDs that
the hardware has allocated for this purpose.
This patch classifies the type of multicast address based on its first
bytes, then redirects to one of the 3 different hardware procedures.
Note that this gives us a really better way of redirecting PTP frames
sent at 01-1b-19-00-00-00 to the CPU. Previously, Yangbo Lu tried to add
a trapping rule for PTP EtherType but got a lot of pushback:
https://patchwork.ozlabs.org/project/netdev/patch/20190813025214.18601-5-yangbo.lu@nxp.com/
But right now, that isn't needed at all. The application stack (ptp4l)
does this for the PTP multicast addresses it's interested in (which are
configurable, and include 01-1b-19-00-00-00):
memset(&mreq, 0, sizeof(mreq));
mreq.mr_ifindex = index;
mreq.mr_type = PACKET_MR_MULTICAST;
mreq.mr_alen = MAC_LEN;
memcpy(mreq.mr_address, addr1, MAC_LEN);
err1 = setsockopt(fd, SOL_PACKET, PACKET_ADD_MEMBERSHIP, &mreq,
sizeof(mreq));
Into the kernel, this translates into a dev_mc_add on the switch network
interfaces, and our drivers know that it means they should translate it
into a host MDB address (make the CPU port be the destination).
Previously, this was broken because all mdb addresses were treated as
IPv4 (which 01-1b-19-00-00-00 obviously is not).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current iterators are impossible to understand at first glance
without switching back and forth between the definitions and their
actual use in the for loops.
So introduce some convenience names to help readability.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds the mdb hooks in felix and exports the mdb functions from
ocelot.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When used in DSA mode (as seen in Felix), the DEST_IDX in the MAC table
should point to the PGID for the CPU port (PGID_CPU) and not for the
Ethernet port where the CPU queues are redirected to (also known as Node
Processor Interface - NPI).
Because for Felix this distinction shouldn't really matter (from DSA
perspective, the NPI port _is_ the CPU port), make the ocelot library
act upon the CPU port when NPI mode is enabled. This has no effect for
the mscc_ocelot driver for VSC7514, because that does not use NPI (and
ocelot->npi is -1).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ocelot hardware designers have made some hacks to support multicast
IPv4 and IPv6 addresses. Normally, the MAC table matches on MAC
addresses and the destination ports are selected through the DEST_IDX
field of the respective MAC table entry. The DEST_IDX points to a Port
Group ID (PGID) which contains the bit mask of ports that frames should
be forwarded to. But there aren't a lot of PGIDs (only 80 or so) and
there are clearly many more IP multicast addresses than that, so it
doesn't scale to use this PGID mechanism, so something else was done.
Since the first portion of the MAC address is known, the hack they did
was to use a single PGID for _flooding_ unknown IPv4 multicast
(PGID_MCIPV4 == 62), but for known IP multicast, embed the destination
ports into the first 3 bytes of the MAC address recorded in the MAC
table.
The VSC7514 datasheet explains it like this:
3.9.1.5 IPv4 Multicast Entries
MAC table entries with the ENTRY_TYPE = 2 settings are interpreted
as IPv4 multicast entries.
IPv4 multicasts entries match IPv4 frames, which are classified to
the specified VID, and which have DMAC = 0x01005Exxxxxx, where
xxxxxx is the lower 24 bits of the MAC address in the entry.
Instead of a lookup in the destination mask table (PGID), the
destination set is programmed as part of the entry MAC address. This
is shown in the following table.
Table 78: IPv4 Multicast Destination Mask
Destination Ports Record Bit Field
---------------------------------------------
Ports 10-0 MAC[34-24]
Example: All IPv4 multicast frames in VLAN 12 with MAC 01005E112233 are
to be forwarded to ports 3, 8, and 9. This is done by inserting the
following entry in the MAC table entry:
VALID = 1
VID = 12
MAC = 0x000308112233
ENTRY_TYPE = 2
DEST_IDX = 0
But this procedure is not at all what's going on in the driver. In fact,
the code that embeds the ports into the MAC address looks like it hasn't
actually been tested. This patch applies the procedure described in the
datasheet.
Since there are many other fixes to be made around multicast forwarding
until it works properly, there is no real reason for this patch to be
backported to stable trees, or considered a real fix of something that
should have worked.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove support for context switching between the guest's and host's
desired UMWAIT_CONTROL. Propagating the guest's value to hardware isn't
required for correct functionality, e.g. KVM intercepts reads and writes
to the MSR, and the latency effects of the settings controlled by the
MSR are not architecturally visible.
As a general rule, KVM should not allow the guest to control power
management settings unless explicitly enabled by userspace, e.g. see
KVM_CAP_X86_DISABLE_EXITS. E.g. Intel's SDM explicitly states that C0.2
can improve the performance of SMT siblings. A devious guest could
disable C0.2 so as to improve the performance of their workloads at the
detriment to workloads running in the host or on other VMs.
Wholesale removal of UMWAIT_CONTROL context switching also fixes a race
condition where updates from the host may cause KVM to enter the guest
with the incorrect value. Because updates are are propagated to all
CPUs via IPI (SMP function callback), the value in hardware may be
stale with respect to the cached value and KVM could enter the guest
with the wrong value in hardware. As above, the guest can't observe the
bad value, but it's a weird and confusing wart in the implementation.
Removal also fixes the unnecessary usage of VMX's atomic load/store MSR
lists. Using the lists is only necessary for MSRs that are required for
correct functionality immediately upon VM-Enter/VM-Exit, e.g. EFER on
old hardware, or for MSRs that need to-the-uop precision, e.g. perf
related MSRs. For UMWAIT_CONTROL, the effects are only visible in the
kernel via TPAUSE/delay(), and KVM doesn't do any form of delay in
vcpu_vmx_run(). Using the atomic lists is undesirable as they are more
expensive than direct RDMSR/WRMSR.
Furthermore, even if giving the guest control of the MSR is legitimate,
e.g. in pass-through scenarios, it's not clear that the benefits would
outweigh the overhead. E.g. saving and restoring an MSR across a VMX
roundtrip costs ~250 cycles, and if the guest diverged from the host
that cost would be paid on every run of the guest. In other words, if
there is a legitimate use case then it should be enabled by a new
per-VM capability.
Note, KVM still needs to emulate MSR_IA32_UMWAIT_CONTROL so that it can
correctly expose other WAITPKG features to the guest, e.g. TPAUSE,
UMWAIT and UMONITOR.
Fixes: 6e3ba4abcea56 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623005135.10414-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Andrii Nakryiko says:
====================
This patch set implements libbpf support for a second kind of special externs,
kernel symbols, in addition to existing Kconfig externs.
Right now, only untyped (const void) externs are supported, which, in
C language, allow only to take their address. In the future, with kernel BTF
getting type info about its own global and per-cpu variables, libbpf will
extend this support with BTF type info, which will allow to also directly
access variable's contents and follow its internal pointers, similarly to how
it's possible today in fentry/fexit programs.
As a first practical use of this functionality, bpftool gained ability to show
PIDs of processes that have open file descriptors for BPF map/program/link/BTF
object. It relies on iter/task_file BPF iterator program to extract this
information efficiently.
There was a bunch of bpftool refactoring (especially Makefile) necessary to
generalize bpftool's internal BPF program use. This includes generalization of
BPF skeletons support, addition of a vmlinux.h generation, extracting and
building minimal subset of bpftool for bootstrapping.
v2->v3:
- fix sec_btf_id check (Hao);
v1->v2:
- docs fixes (Quentin);
- dual GPL/BSD license for pid_inter.bpf.c (Quentin);
- NULL-init kcfg_data (Hao Luo);
rfc->v1:
- show pids, if supported by kernel, always (Alexei);
- switched iter output to binary to support showing process names;
- update man pages;
- fix few minor bugs in libbpf w.r.t. extern iteration.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add statements about bpftool being able to discover process info, holding
reference to BPF map, prog, link, or BTF. Show example output as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-10-andriin@fb.com
|
