| Age | Commit message (Collapse) | Author |
|---|
|
[Why/How]
LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read
reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier
may not support this register, assume the mandatory value is programmed
by the LTTPR to avoid AUX timeout issues.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1594b60d74959c0680ddf777a74963c98afcdd7e)
|
|
[Why]
The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but
dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd
block index starts after 255, so it can't be indexed properly.
This leads to problems with the display when the EDID is parsed.
[How]
Change the variable type to 'short' so that larger values can be indexed.
Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com>
Reported-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: David Ober <dober@lenovo.com>
Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a918bb4a90d423ced2976a794f2724c362c1f063)
Cc: stable@vger.kernel.org
|
|
If peer memory is accessible through XGMI, allow leaving it in VRAM
rather than forcing its migration to GTT on DMABuf attachment.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 372c8d72c3680fdea3fbb2d6b089f76b4a6d596a)
|
|
[Why]
Urgent latency adjustment was disabled on DCN35 due to issues with P0
enablement on some platforms. Without urgent latency, underflows occur
when doing certain high timing configurations. After testing, we found
that reenabling urgent latency didn't reintroduce p0 support on multiple
platforms.
[How]
renable urgent latency on DCN35 and setting it to 3000 Mhz.
This reverts commit 3412860cc4c0c484f53f91b371483e6e4440c3e5.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <nsusanto@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cd74ce1f0cddffb3f36d0995d0f61e89f0010738)
|
|
[Why]
While system undergoing gpu reset always do full update
to sync the dc state before and after reset.
[How]
Return true in should_reset_plane() if gpu reset detected
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ba8619b9a378ad218ad6c2e2ccaee8f531e08de)
Cc: stable@vger.kernel.org
|
|
[Why]
The indexing of stream_status in dm_gpureset_commit_state() is incorrect.
That leads to asserts in multi-display configuration after gpu reset.
[How]
Adjust the indexing logic to align stream_status with surface_updates.
Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3808
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d91bc901398741d317d9b55c59ca949d4bc7394b)
Cc: stable@vger.kernel.org
|
|
Pinning of VRAM is for peer devices that don't support dynamic attachment
and move notifiers. But it requires that all such peer devices are able to
access VRAM via PCIe P2P. Any device without P2P access requires migration
to GTT, which fails if the memory is already pinned for another peer
device.
Sharing between GPUs should not require pinning in VRAM. However, if
DMABUF_MOVE_NOTIFY is disabled in the kernel build, even DMABufs shared
between GPUs must be pinned, which can lead to failures and functional
regressions on systems where some peer GPUs are not P2P accessible.
Disable VRAM pinning if move notifiers are disabled in the kernel build
to fix regressions when sharing BOs between GPUs.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05185812ae3695fe049c14847ce3cbeccff1bf2e)
|
|
When determining the domains for pinning DMABufs, filter allowed_domains
and fail with a warning if VRAM is forbidden and GTT is not an allowed
domain.
Fixes: f5e7fabd1f5c ("drm/amdgpu: allow pinning DMA-bufs into VRAM if all importers can do P2P")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3940796a6eefa555fec688a4adee5659ef9fa431)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- subpage mode fixes:
- access correct object (folio) when looking up bit offset
- fix assertion condition for number of blocks per folio
- fix upper boundary of locking range in hole punch
- zoned fixes:
- fix potential deadlock caught by lockdep when zone reporting and
device freeze run in parallel
- fix zone write pointer mismatch and NULL pointer dereference when
metadata are converted from DUP to RAID1
- fix error handling when reloc inode creation fails
- in tree-checker, unify error code for header level check
- block layer: add helpers to read zone capacity
* tag 'for-6.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: skip reporting zone for new block group
block: introduce zone capacity helper
btrfs: tree-checker: adjust error code for header level check
btrfs: fix invalid inode pointer after failure to create reloc inode
btrfs: zoned: return EIO on RAID1 block group write pointer mismatch
btrfs: fix the ASSERT() inside GET_SUBPAGE_BITMAP()
btrfs: avoid page_lockend underflow in btrfs_punch_hole_lock_range()
btrfs: subpage: access correct object when reading bitmap start in subpage_calc_start_bit()
|
|
Pull integrity fix from Roberto Sassu:
"One performance fix to avoid unnecessarily taking the inode lock"
* tag 'integrity-6.15-rc3-fix' of https://github.com/linux-integrity/linux:
ima: process_measurement() needlessly takes inode_lock() on MAY_READ
|
|
This reduces the slowdown in face of multiple callers issuing close on
what turns out to not be the last reference.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/20250418125756.59677-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202504171513.6d6f8a16-lkp@intel.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Davidlohr Bueso <dave@stgolabs.net> says:
This is a respin of the series[0] to address the sleep in atomic
scenarios for noref migration with large folios, introduced in:
3c20917120ce61 ("block/bdev: enable large folio support for large logical block sizes")
The main difference is that it removes the first patch and moves the fix
(reducing the i_private_lock critical region in the migration path) to
the final patch, which also introduces the new BH_Migrate flag. It also
simplifies the locking scheme in patch 1 to avoid folio trylocking in
the atomic lookup cases. So essentially blocking users will take the
folio lock and hence wait for migration, and otherwise nonblocking
callers will bail the lookup if a noref migration is on-going. Blocking
callers will also benefit from potential performance gains by reducing
contention on the spinlock for bdev mappings.
* patches from https://lore.kernel.org/20250418015921.132400-1-dave@stgolabs.net:
mm/migrate: fix sleep in atomic for large folios and buffer heads
fs/ext4: use sleeping version of sb_find_get_block()
fs/jbd2: use sleeping version of __find_get_block()
fs/ocfs2: use sleeping version of __find_get_block()
fs/buffer: use sleeping version of __find_get_block()
fs/buffer: introduce sleeping flavors for pagecache lookups
fs/buffer: split locking for pagecache lookups
Link: https://lore.kernel.org/20250418015921.132400-1-dave@stgolabs.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The large folio + buffer head noref migration scenarios are
being naughty and blocking while holding a spinlock.
As a consequence of the pagecache lookup path taking the
folio lock this serializes against migration paths, so
they can wait for each other. For the private_lock
atomic case, a new BH_Migrate flag is introduced which
enables the lookup to bail.
This allows the critical region of the private_lock on
the migration path to be reduced to the way it was before
ebdf4de5642fb6 ("mm: migrate: fix reference check race
between __find_get_block() and migration"), that is covering
the count checks.
The scope is always noref migration.
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: syzbot+f3c6fda1297c748a7076@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/oe-lkp/202503101536.27099c77-lkp@intel.com
Fixes: 3c20917120ce61 ("block/bdev: enable large folio support for large logical block sizes")
Reviewed-by: Jan Kara <jack@suse.cz>
Co-developed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-8-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev # [0] [1]
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable ext4_free_blocks() to use it, which has a cond_resched to begin
with. Convert to the new nonatomic flavor to benefit from potential
performance benefits and adapt in the future vs migration such that
semantics are kept.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-7-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert to the new nonatomic flavor to benefit from potential
performance benefits and adapt in the future vs migration such
that semantics are kept.
- jbd2_journal_revoke(): can sleep (has might_sleep() in the beginning)
- jbd2_journal_cancel_revoke(): only used from do_get_write_access() and
do_get_create_access() which do sleep. So can sleep.
- jbd2_clear_buffer_revoked_flags() - only called from journal commit code
which sleeps. So can sleep.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-6-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is a path that allows for blocking as it does IO. Convert
to the new nonatomic flavor to benefit from potential performance
benefits and adapt in the future vs migration such that semantics
are kept.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-5-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert to the new nonatomic flavor to benefit from potential performance
benefits and adapt in the future vs migration such that semantics
are kept.
Convert write_boundary_block() which already takes the buffer
lock as well as bdev_getblk() depending on the respective gpf flags.
There are no changes in semantics.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-4-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev # [0] [1]
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add __find_get_block_nonatomic() and sb_find_get_block_nonatomic()
calls for which users will be converted where safe. These versions
will take the folio lock instead of the mapping's private_lock.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-3-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Both the hfs and hfsplus filesystem have been orphaned since at least
2014, i.e., over 10 years. However, HFS/HFS+ driver needs to stay
for Debian Ports as otherwise we won't be able to boot PowerMacs
using GRUB because GRUB won't be usable anymore on PowerMacs with
HFS/HFS+ being removed from the kernel.
This patch proposes to add Viacheslav Dubeyko and
John Paul Adrian Glaubitz as maintainers of HFS/HFS+ driver.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/20250417223507.1097186-1-slava@dubeyko.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Callers of __find_get_block() may or may not allow for blocking
semantics, and is currently assumed that it will not. Layout
two paths based on this. The the private_lock scheme will
continued to be used for atomic contexts. Otherwise take the
folio lock instead, which protects the buffers, such as
vs migration and try_to_free_buffers().
Per the "hack idea", the latter can alleviate contention on
the private_lock for bdev mappings. For reasons of determinism
and avoid making bugs hard to reproduce, the trylocking is not
attempted.
No change in semantics. All lookup users still take the spinlock.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-2-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When the select of PRIME_MUMBERS was removed from it's KUnit test
Kconfig nothing was added to the KUnit configs, meaning that when run
via the KUnit runner the tests are neither built nor run. Add
PRIME_NUMBERS to all_tests.config so they are enabled when the KUnit
runner builds the kernel.
Fixes: 3f2925174f8b ("lib/prime_numbers: KUnit test should not select PRIME_NUMBERS")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250422-lib-fix-prime-numbers-kunit-v1-1-4278c1d4a4ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
When a reserved memory region described in the device tree is attached
to a device, it is expected that the device's limitations are correctly
included in that description.
However, if the device driver failed to implement DMA address masking
or addressing beyond the default 32 bits (on arm64), then bad things
could happen because the DMA address was truncated, such as playing
back audio with no actual audio coming out, or DMA overwriting random
blocks of kernel memory.
Check against the coherent DMA mask when the memory regions are attached
to the device. Give a warning when the memory region can not be covered
by the mask.
A warning instead of a hard error was chosen, because it is possible
that existing drivers could be working fine even if they forgot to
extend the coherent DMA mask.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250421083930.374173-1-wenst@chromium.org
|
|
On IMA policy update, if a measure rule exists in the policy,
IMA_MEASURE is set for ima_policy_flags which makes the violation_check
variable always true. Coupled with a no-action on MAY_READ for a
FILE_CHECK call, we're always taking the inode_lock().
This becomes a performance problem for extremely heavy read-only workloads.
Therefore, prevent this only in the case there's no action to be taken.
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Acked-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Remove the duplicated section and while at it, turn spaces into tabs.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Fixes: c7b67ddc3c99 ("xfs: document zoned rt specifics in admin-guide")
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
p8022.c defines two external functions, register_8022_client()
and unregister_8022_client(), the last use of which was removed in
2018 by
commit 7a2e838d28cf ("staging: ipx: delete it from the tree")
Remove the p8022.c file, it's corresponding header, and glue
surrounding it. There was one place the header was included in vlan.c
but it didn't use the functions it declared.
There was a comment in net/802/Makefile about checking
against net/core/Makefile, but that's at least 20 years old and
there's no sign of net/core/Makefile mentioning it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250418011519.145320-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xfs_zoned_need_gc makes use of mult_frac() to calculate the threshold
for triggering the zoned garbage collector, but, turns out mult_frac()
doesn't properly work with 64-bit data types and this caused build
failures on some 32-bit architectures.
Fix this by essentially open coding mult_frac() in a 64-bit friendly
way.
Notice we don't need to bother with counters underflow here because
xfs_estimate_freecounter() will always return a positive value, as it
leverages percpu_counter_read_positive to read such counters.
Fixes: 845abeb1f06a ("xfs: add tunable threshold parameter for triggering zone GC")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504181233.F7D9Atra-lkp@intel.com/
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
If an error occurs after a successful stm32_ospi_dma_setup() call, some
dma_release_channel() calls are needed to release some resources, as
already done in the remove function.
Fixes: 79b8a705e26c ("spi: stm32: Add OSPI driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/2674c8df1d05ab312826b69bfe9559f81d125a0b.1744975624.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In lwtunnel_{output|xmit}(), dev_xmit_recursion() may be called in
preemptible scope for PREEMPT kernels. This patch disables BHs before
calling dev_xmit_recursion(). BHs are re-enabled only at the end, since
we must ensure the same CPU is used for both dev_xmit_recursion_inc()
and dev_xmit_recursion_dec() (and any other recursion levels in some
cases) in order to maintain valid per-cpu counters.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://lore.kernel.org/netdev/CAADnVQJFWn3dBFJtY+ci6oN1pDFL=TzCmNbRgey7MdYxt_AP2g@mail.gmail.com/
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Closes: https://lore.kernel.org/netdev/m2h62qwf34.fsf@gmail.com/
Fixes: 986ffb3a57c5 ("net: lwtunnel: fix recursion loops")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416160716.8823-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Zero-initialize TCP header via memset() to avoid garbage values that
may affect checksum or behavior during test transmission.
Also zero-fill allocated payload and padding regions using memset()
after skb_put(), ensuring deterministic content for all outgoing
test packets.
Fixes: 3e1e58d64c3d ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416160125.2914724-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
lkp reported a warning about missing prototype for a recent patch.
The kernel-doc style comments are out of sync, move them to the right
function.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504190615.g9fANxHw-lkp@intel.com/
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
[mszyprow: reformatted subject]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250422114034.3535515-1-balbirs@nvidia.com
|
|
Add support for ndo_setup_tc to enable CBS offload functionality as
part of traffic control configuration for network devices, where CBS
is applied from the CPU to the switch. More specifically, CBS is
applied at the GMAC in the topmost architecture diagram.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416115757.28156-1-justinlai0215@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Propagate the error code if key_alloc() fails. Don't return
success.
Fixes: 9d1d2b59341f ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/Z_-P_1iLDWksH1ik@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With lan88xx based devices the lan78xx driver can get stuck in an
interrupt loop while bringing the device up, flooding the kernel log
with messages like the following:
lan78xx 2-3:1.0 enp1s0u3: kevent 4 may have been dropped
Removing interrupt support from the lan88xx PHY driver forces the
driver to use polling instead, which avoids the problem.
The issue has been observed with Raspberry Pi devices at least since
4.14 (see [1], bug report for their downstream kernel), as well as
with Nvidia devices [2] in 2020, where disabling interrupts was the
vendor-suggested workaround (together with the claim that phylib
changes in 4.9 made the interrupt handling in lan78xx incompatible).
Iperf reports well over 900Mbits/sec per direction with client in
--dualtest mode, so there does not seem to be a significant impact on
throughput (lan88xx device connected via switch to the peer).
[1] https://github.com/raspberrypi/linux/issues/2447
[2] https://forums.developer.nvidia.com/t/jetson-xavier-and-lan7800-problem/142134/11
Link: https://lore.kernel.org/0901d90d-3f20-4a10-b680-9c978e04ddda@lunn.ch
Fixes: 792aec47d59d ("add microchip LAN88xx phy driver")
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Cc: kernel-list@raspberrypi.com
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250416102413.30654-1-fiona.klute@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Shannon Nelson says:
====================
ionic: support QSFP CMIS
This patchset sets up support for additional pages and better
handling of the QSFP CMIS data.
v1: https://lore.kernel.org/netdev/20250411182140.63158-1-shannon.nelson@amd.com/
====================
Link: https://patch.msgid.link/20250415231317.40616-1-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make the CMIS module type's page 17 channel data available for
ethtool to request. As done previously, carve space for this
data from the port_info reserved space.
In the future, if additional pages are needed, a new firmware
AdminQ command will be added for accessing random pages.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415231317.40616-4-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the newer get_module_eeprom_by_page interface.
Only the upper half of the 256 byte page is available for
reading, and the firmware puts the two sections into the
extended sprom buffer, so a union is used over the extended
sprom buffer to make clear which page is to be accessed.
With get_module_eeprom_by_page implemented there is no need
for the older get_module_info or git_module_eeprom interfaces,
so remove them.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415231317.40616-3-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some QSFP modules have more eeprom to be read by ethtool than
the initial high and low page 0 that is currently available
in the DSC's ionic sprom[] buffer. Since the current sprom[]
is baked into the middle of an existing API struct, to make
the high end of page 1 and page 2 available a block is carved
from a reserved space of the existing port_info struct and the
ionic_get_module_eeprom() service is taught how to get there.
Newer firmware writes the additional QSFP page info here,
yet this remains backward compatible because older firmware
sets this space to all 0 and older ionic drivers do not use
the reserved space.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415231317.40616-2-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ido Schimmel says:
====================
vxlan: Convert FDB table to rhashtable
The VXLAN driver currently stores FDB entries in a hash table with a
fixed number of buckets (256), resulting in reduced performance as the
number of entries grows. This patchset solves the issue by converting
the driver to use rhashtable which maintains a more or less constant
performance regardless of the number of entries.
Measured transmitted packets per second using a single pktgen thread
with varying number of entries when the transmitted packet always hits
the default entry (worst case):
Number of entries | Improvement
------------------|------------
1k | +1.12%
4k | +9.22%
16k | +55%
64k | +585%
256k | +2460%
The first patches are preparations for the conversion in the last patch.
Specifically, the series is structured as follows:
Patch #1 adds RCU read-side critical sections in the Tx path when
accessing FDB entries. Targeting at net-next as I am not aware of any
issues due to this omission despite the code being structured that way
for a long time. Without it, traces will be generated when converting
FDB lookup to rhashtable_lookup().
Patch #2-#5 simplify the creation of the default FDB entry (all-zeroes).
Current code assumes that insertion into the hash table cannot fail,
which will no longer be true with rhashtable.
Patches #6-#10 add FDB entries to a linked list for entry traversal
instead of traversing over them using the fixed size hash table which is
removed in the last patch.
Patches #11-#12 add wrappers for FDB lookup that make it clear when each
should be used along with lockdep annotations. Needed as a preparation
for rhashtable_lookup() that must be called from an RCU read-side
critical section.
Patch #13 treats dst cache initialization errors as non-fatal. See more
info in the commit message. The current code happens to work because
insertion into the fixed size hash table is slow enough for the per-CPU
allocator to be able to create new chunks of per-CPU memory.
Patch #14 adds an FDB key structure that includes the MAC address and
source VNI. To be used as rhashtable key.
Patch #15 does the conversion to rhashtable.
====================
Link: https://patch.msgid.link/20250415121143.345227-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
FDB entries are currently stored in a hash table with a fixed number of
buckets (256), resulting in performance degradation as the number of
entries grows. Solve this by converting the driver to use rhashtable
which maintains more or less constant performance regardless of the
number of entries.
Measured transmitted packets per second using a single pktgen thread
with varying number of entries when the transmitted packet always hits
the default entry (worst case):
Number of entries | Improvement
------------------|------------
1k | +1.12%
4k | +9.22%
16k | +55%
64k | +585%
256k | +2460%
In addition, the change reduces the size of the VXLAN device structure
from 2584 bytes to 672 bytes.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-16-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In preparation for converting the FDB table to rhashtable, introduce a
key structure that includes the MAC address and source VNI.
No functional changes intended.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-15-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
FDB entries are allocated in an atomic context as they can be added from
the data path when learning is enabled.
After converting the FDB hash table to rhashtable, the insertion rate
will be much higher (*) which will entail a much higher rate of per-CPU
allocations via dst_cache_init().
When adding a large number of entries (e.g., 256k) in a batch, a small
percentage (< 0.02%) of these per-CPU allocations will fail [1]. This
does not happen with the current code since the insertion rate is low
enough to give the per-CPU allocator a chance to asynchronously create
new chunks of per-CPU memory.
Given that:
a. Only a small percentage of these per-CPU allocations fail.
b. The scenario where this happens might not be the most realistic one.
c. The driver can work correctly without dst caches. The dst_cache_*()
APIs first check that the dst cache was properly initialized.
d. The dst caches are not always used (e.g., 'tos inherit').
It seems reasonable to not treat these allocation failures as fatal.
Therefore, do not bail when dst_cache_init() fails and suppress warnings
by specifying '__GFP_NOWARN'.
[1] percpu: allocation failed, size=40 align=8 atomic=1, atomic alloc failed, no space left
(*) 97% reduction in average latency of vxlan_fdb_update() when adding
256k entries in a batch.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-14-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
__vxlan_find_mac() is called from both the data path (e.g., during
learning) and the control path (e.g., when replacing an entry). The
function is missing lockdep annotations to make sure that the FDB hash
lock is held during FDB updates.
Rename __vxlan_find_mac() to vxlan_find_mac_rcu() to reflect the fact
that it should be called from an RCU read-side critical section and call
it from vxlan_find_mac() which checks that the FDB hash lock is held.
Change callers to invoke the appropriate function.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-13-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
vxlan_find_mac() is only expected to be called from the Tx path as it
updates the 'used' timestamp. Rename it to vxlan_find_mac_tx() to
reflect that and to avoid incorrect updates of this timestamp like those
addressed by commit 9722f834fe9a ("vxlan: Avoid unnecessary updates to
FDB 'used' time").
No functional changes intended.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-12-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of holding the FDB hash lock when traversing the FDB linked list
during flushing, use RCU and only acquire the lock for entries that need
to be flushed.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-11-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of holding the FDB hash lock when traversing the FDB linked list
during garbage collection, use RCU and only acquire the lock for entries
that need to be removed (aged out).
Avoid races by using hlist_unhashed() to check that the entry has not
been removed from the list by another thread.
Note that vxlan_fdb_destroy() uses hlist_del_init_rcu() to remove an
entry from the list which should cause list_unhashed() to return true.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-10-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In preparation for removing the fixed size hash table, convert FDB entry
traversal to use the newly added FDB linked list.
No functional changes intended.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-9-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, FDB entries are stored in a hash table with a fixed number of
buckets. The table is used for both lookups and entry traversal.
Subsequent patches will convert the table to rhashtable which is not
suitable for entry traversal.
In preparation for this conversion, add FDB entries to a linked list.
Subsequent patches will convert the driver to use this list when
traversing entries during dump, flush, etc.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-8-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the VXLAN driver stores FDB entries in a hash table with a
fixed number of buckets (256). Subsequent patches are going to convert
this table to rhashtable with a linked list for entry traversal, as
rhashtable is more scalable.
In preparation for this conversion, move from a per-bucket spin lock to
a single spin lock that protects the entire FDB table.
The per-bucket spin locks were introduced by commit fe1e0713bbe8
("vxlan: Use FDB_HASH_SIZE hash_locks to reduce contention") citing
"huge contention when inserting/deleting vxlan_fdbs into the fdb_head".
It is not clear from the commit message which code path was holding the
spin lock for long periods of time, but the obvious suspect is the FDB
cleanup routine (vxlan_cleanup()) that periodically traverses the entire
table in order to delete aged-out entries.
This will be solved by subsequent patches that will convert the FDB
cleanup routine to traverse the linked list of FDB entries using RCU,
only acquiring the spin lock when deleting an aged-out entry.
The change reduces the size of the VXLAN device structure from 3600
bytes to 2576 bytes.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-7-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The default FDB entry can be associated with a net device if a physical
device (i.e., 'dev PHYS_DEV') was specified during the creation of the
VXLAN device.
The assignment of the net device pointer to 'dst->remote_dev' logically
belongs in the if block that resolves the pointer from the specified
ifindex, so move it there.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-6-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 0241b836732f ("vxlan: fix default fdb entry netlink notify
ordering during netdev create") split the creation of the default FDB
entry from its notification to avoid sending a RTM_NEWNEIGH notification
before RTM_NEWLINK.
Previous patches restructured the code so that the default FDB entry is
created after registering the VXLAN device and the notification about
the new entry immediately follows its creation.
Therefore, simplify the code and revert back to vxlan_fdb_update() which
takes care of both creating the FDB entry and notifying user space
about it.
Hold the FDB hash lock when calling vxlan_fdb_update() like it expects.
A subsequent patch will add a lockdep assertion to make sure this is
indeed the case.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-5-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
