| Age | Commit message (Collapse) | Author |
|---|
|
Earlier, the firmware could only request the reset handshake is
done during the dump, if the dump was split. However, it's also
needed when the dump isn't split, in which case it must be done
before the dump. The firmware now advertises this requirement,
so do the handshake in the non-split case when asked for.
Rename apply policy ..._RESET_HANDSHAKE to ..._SPLIT_DUMP_RESET
to more clearly indicate that this specific dump needs to be
split, while the handshake requirement overall is now indicated
by the new capability flag.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.10adafedb74b.Ie3911db1ebbd196ae4b0de1c53012aa1de193c0d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This state can never be entered, since the last place using it was
removed with non-DQA mode in commit c8f54701bdbf ("iwlwifi: mvm:
remove non-DQA mode"). Clean up this code too.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.e8a20fb41dc5.I9cd41a15148c90e953335e7020405103ba3fc7f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In brcmf_usb_dl_cmd(), the error logging is not enough to describe
the error state. And some caller of the brcmf_usb_dl_cmd() does not
handle its error. An error log in brcmf_usb_dl_cmd() is needed to
prevent silent failure.
Add error handling in brcmf_usb_dl_cmd() to log the command id and
error code in the brcmf_usb_dl_cmd() fails. In this way, every
invocation of the function logs a message upon failure.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422065938.2345-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An AP supporting Beacon Protection should set bit 84 in
the extended capabilities IE (9.4.2.25 in the 802.11be D7 spec).
So the *4th* bit of the 10th byte should be checked to figure out
whether beacon protection is enabled or disabled.
Signed-off-by: Karthikeyan Kathirvel <karthikeyan.kathirvel@oss.qualcomm.com>
Reviewed-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250421111505.3633992-1-karthikeyan.kathirvel@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping looks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250417-restricted-pointers-wifi-v1-1-b79cdaae5579@linutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Various spelling corrections as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250415-brcmsmac-spell-v1-1-3e1375586883@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In mwifiex_add_virtual_intf() several settings done in a switch/case
are the same in all cases. Move them out of the switch/case to
deduplicate the code.
bss_started is not initialized in all switch/case branches, but it is
only used in AP mode in the driver, so it doesn't hurt to move its
initialization out of the switch/case as well.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Francesco Dolcini <francesco@dolcini.it>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-9-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mwifiex_is_tdls_off_chan() is only used locally. Make it static.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-8-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Align multiline if() under the opening brace.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-7-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In mwifiex_setup_ht_caps() first a local struct ieee80211_mcs_info
is initialized and afterwards copied over &ht_info->mcs. Simplify
this by initializing &ht_info->mcs directly.
While at it call memset on the u8 rx_mask[] array instead of the struct
which makes the intention clearer and we no longer have to assume the
rx_mask array is the first member of struct ieee80211_mcs_info.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-6-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
priv is not needed in mwifiex_dnld_cmd_to_fw(), so pass the adapter to
it as context pointer.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-5-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
region_code_mapping_t is not modified and shouldn't be. Mark it const.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-4-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Several functions initialize the priv * without actually using the
initialized value. Drop the initialization.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-3-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mwifiex_hs_activated_event() takes a struct mwifiex_private * as
context pointer which this function doesn't need directly and the callers
don't have. Use struct mwifiex_adapter * instead to simplify both the
function and the callers.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-2-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The code block inside the if/else is the same with just using
pbitmap_rates if non NULL or priv->bitmap_rates otherwise. Deduplicate
the code by picking the correct pointer first and then using it
unconditionally.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-1-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The __get_unaligned_cpu32 function is deprecated. So, replace it with
the more generic get_unaligned and just cast the input parameter.
Signed-off-by: Julian Vetter <julian@outer-limits.org>
Link: https://patch.msgid.link/20250408092220.2267754-1-julian@outer-limits.org
[fix subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250407-gpiochip-set-rv-bcma-v1-1-fa403ad76966@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit 484a54c2e597dbc4ace79c1687022282905afba0. The CoDel
parameter change essentially disables CoDel on slow stations, with some
questionable assumptions, as Dave pointed out in [0]. Quoting from
there:
But here are my pithy comments as to why this part of mac80211 is so
wrong...
static void sta_update_codel_params(struct sta_info *sta, u32 thr)
{
- if (thr && thr < STA_SLOW_THRESHOLD * sta->local->num_sta) {
1) sta->local->num_sta is the number of associated, rather than
active, stations. "Active" stations in the last 50ms or so, might have
been a better thing to use, but as most people have far more than that
associated, we end up with really lousy codel parameters, all the
time. Mistake numero uno!
2) The STA_SLOW_THRESHOLD was completely arbitrary in 2016.
- sta->cparams.target = MS2TIME(50);
This, by itself, was probably not too bad. 30ms might have been
better, at the time, when we were battling powersave etc, but 20ms was
enough, really, to cover most scenarios, even where we had low rate
2Ghz multicast to cope with. Even then, codel has a hard time finding
any sane drop rate at all, with a target this high.
- sta->cparams.interval = MS2TIME(300);
But this was horrible, a total mistake, that is leading to codel being
completely ineffective in almost any scenario on clients or APS.
100ms, even 80ms, here, would be vastly better than this insanity. I'm
seeing 5+seconds of delay accumulated in a bunch of otherwise happily
fq-ing APs....
100ms of observed jitter during a flow is enough. Certainly (in 2016)
there were interactions with powersave that I did not understand, and
still don't, but if you are transmitting in the first place, powersave
shouldn't be a problemmmm.....
- sta->cparams.ecn = false;
At the time we were pretty nervous about ecn, I'm kind of sanguine
about it now, and reliably indicating ecn seems better than turning it
off for any reason.
[...]
In production, on p2p wireless, I've had 8ms and 80ms for target and
interval for years now, and it works great.
I think Dave's arguments above are basically sound on the face of it,
and various experimentation with tighter CoDel parameters in the OpenWrt
community have show promising results[1]. So I don't think there's any
reason to keep this parameter fiddling; hence this revert.
[0] https://lore.kernel.org/linux-wireless/CAA93jw6NJ2cmLmMauz0xAgC2MGbBq6n0ZiZzAdkK0u4b+O2yXg@mail.gmail.com/
[1] https://forum.openwrt.org/t/reducing-multiplexing-latencies-still-further-in-wifi/133605/130
Suggested-By: Dave Taht <dave.taht@gmail.com>
In-memory-of: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250403183930.197716-1-toke@toke.dk
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We still have ieee80211_chandef_rate_flags() and all that,
but all the users seem pretty much broken (deflink, etc.)
Remove all the code. It's been two years since last anyone
even vaguely entertained the notion of looking at this and
fixing it.
Link: https://patch.msgid.link/20250329221419.c31da7ae8c84.I1a3a4b6008134d66ca75a5bdfc004f4594da8145@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:6430:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/Z-SV8gb6MuZJmmhe@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warnings:
net/mac80211/spectmgmt.c:151:47: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
net/mac80211/spectmgmt.c:155:48: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/Z-SQdHZljwAgIlp9@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Reference wireless-controller.yaml schema, so we can use properties
as local-mac-address or mac-address.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20250324-dt-bindings-network-class-v5-5-f5c3fe00e8f0@ixit.cz
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Instead listing local-mac-address and mac-address properties, reference
wireless-controller.yaml schema. The schema brings in constraints for the
property checked during `make dtbs_check`.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20250324-dt-bindings-network-class-v5-4-f5c3fe00e8f0@ixit.cz
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The wireless-controller schema specifies local-mac-address as
used in the bcm4329-fmac device nodes of Apple silicon devices
(arch/arm64/boot/dts/apple).
Fixes `make dtbs_check` for those devices.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20250324-dt-bindings-network-class-v5-3-f5c3fe00e8f0@ixit.cz
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Wireless controllers share the common properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20250324-dt-bindings-network-class-v5-2-f5c3fe00e8f0@ixit.cz
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ethernet-controller schema specifies "mac-address" and
"local-mac-address" but other network devices such as wireless network
adapters use mac addresses as well.
The Devicetree Specification, Release v0.3 specifies in section 4.3.1
a generic "Network Class Binding" with "address-bits", "mac-address",
"local-mac-address" and "max-frame-size". This schema specifies the
"address-bits" property and moves the remaining properties over from
the ethernet-controller.yaml schema.
The "max-frame-size" property is used to describe the maximal payload
size despite its name. Keep the description from ethernet-controller
specifying this property as MTU. The contradictory description in the
Devicetree Specification is ignored.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250324-dt-bindings-network-class-v5-1-f5c3fe00e8f0@ixit.cz
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
s/folowing/following/
s/Celsuis/Celsius/
s/temerature/temperature/ ...twice
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20210317042540.4097078-1-unixbhaskar@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The module metadata for the firmware file iwlwifi-Qu-c0-jf-b0-* is missing.
Signed-off-by: Víctor Gonzalo <victor.gonzalo@anddroptable.net>
Link: https://patch.msgid.link/20240313180227.2224780-1-victor.gonzalo@anddroptable.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The header files net/gso.h is included twice in iwl-utils.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=13555
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250115005431.89510-1-yang.lee@linux.alibaba.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Jason mentioned at netdevconf that we've run out of tx_flags in
the skb_shinfo(). Gain one bit back by removing the wifi bit.
We can do that because the only userspace application for it
(hostapd) doesn't change the setting on the socket, it just
uses different sockets, and normally doesn't even use this any
more, sending the frames over nl80211 instead.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250313134942.52ff54a140ec.If390bbdc46904cf451256ba989d7a056c457af6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Michael Buesch <m@bues.ch>
Cc: linux-wireless@vger.kernel.org
Link: https://patch.msgid.link/20250319092951.37667-38-jirislaby@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Remove weird self-assignment in 'rt2800_loft_search()' assuming
that it was just a typo. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250321134256.821596-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The initialization of async_handlers_list
was accidentally removed in a previous change.
This patch restores the missing initialization
to ensure proper handler registration.
Fixes: 6895d74c11d8 ("wifi: iwlwifi: mld: initialize regulatory early")
Signed-off-by: Itamar Shalev <itamar.shalev@intel.com>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423092503.35206-1-itamar.shalev@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.
Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.
Improve the error message to report more detailed error
information.
Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq fixes for 6.15-rc from Viresh Kumar:
"- Fix possible out-of-bound / null-ptr-deref in drivers (Andre Przywara
and Henry Martin).
- Fix Kconfig issues with compile-test (Johan Hovold and Krzysztof
Kozlowski).
- Fix invalid return value in .get() (Marc Zyngier).
- Add SM8650 to cpufreq-dt-platdev blocklist (Pengyu Luo)."
* tag 'cpufreq-arm-fixes-6.15-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: fix compile-test defaults
cpufreq: cppc: Fix invalid return value in .get() callback
cpufreq: scpi: Fix null-ptr-deref in scpi_cpufreq_get_rate()
cpufreq: scmi: Fix null-ptr-deref in scmi_cpufreq_get_rate()
cpufreq: apple-soc: Fix null-ptr-deref in apple_soc_cpufreq_get_rate()
cpufreq: Do not enable by default during compile testing
cpufreq: Add SM8650 to cpufreq-dt-platdev blocklist
cpufreq: sun50i: prevent out-of-bounds access
|
|
plfxlc_mac_release() asserts that mac->lock is held. This assertion is
incorrect, because even if it was possible, it would not be the valid
behaviour. The function is used when probe fails or after the device is
disconnected. In both cases mac->lock can not be held as the driver is
not working with the device at the moment. All functions that use mac->lock
unlock it just after it was held. There is also no need to hold mac->lock
for plfxlc_mac_release() itself, as mac data is not affected, except for
mac->flags, which is modified atomically.
This bug leads to the following warning:
================================================================
WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0
Modules linked in:
CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: usb_hub_wq hub_event
RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106
Call Trace:
<TASK>
probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694
usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165
usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238
usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620
hub_port_connect drivers/usb/core/hub.c:5477 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5617 [inline]
port_event drivers/usb/core/hub.c:5773 [inline]
hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855
process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292
worker_thread+0xa47/0x1200 kernel/workqueue.c:2439
kthread+0x28d/0x320 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
================================================================
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")
Reported-by: syzbot+7d4f142f6c288de8abfe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7d4f142f6c288de8abfe
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250321185226.71-2-m.masimov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can't rely on the SCRATCH register being 0 on platform that power
gate the NIC in S3. Even in those platforms, the SCRATCH register is
still returning 0x1010000.
Make sure that we understand that those platforms have powered off the
device.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Fixes: cb347bd29d0d ("wifi: iwlwifi: mvm: fix hibernation")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.a7e082ee785c.I9418d76f860f54261cfa89e1f7ac10300904ba40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some BIOSes decide to power gate the WLAN device during S3. Since
iwlwifi doesn't expect this, it gets very noisy reporting that the
device is no longer available. Wifi is still available because iwlwifi
recovers, but it spews scary prints in the log.
Fix that by failing gracefully.
Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.d8d58146c829.I569ca15eaaa774d633038a749cc6ec7448419714@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Perhaps IWL_FW_CHECK() is a bit misnamed, but it just returns
the value of the inner condition. Therefore, the current code
skips the actual function when it has the BAID data and makes
it crash later when it doesn't. Fix the logic.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.9c0b84c44c3b.Ied236258854b149960eb357ec61bf3a572503fbc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When errors occur repeatedly, the driver shouldn't go into a
tight loop trying to reset the device. Implement the backoff
I had already defined IWL_TRANS_RESET_DELAY for, but clearly
forgotten the implementation of.
Fixes: 9a2f13c40c63 ("wifi: iwlwifi: implement reset escalation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.8816e299efa2.I82cde34e2345a2b33b1f03dbb040f5ad3439a5aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When mac80211 switches between non-MLO and MLO it will recreate the
debugfs directories. This results in the add_if_debugfs handler being
called multiple times. As the convenience symlink is created in the mld
debugfs directory and not the vif, it will not be removed by mac80211
when this happens and still exists.
Add a check and only create the convenience symlink if we have not yet
done so.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.2490696f032a.I74319c7cf18f7e16a3d331cb96e38504b9fbab66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If starting the op mode failed, the opmode memory is being freed,
so trans->op_mode needs to be NULLified. Otherwise, trans will access
already freed memory.
Call iwl_trans_op_mode_leave in that case.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.3331d1686556.Ifaf15bdd8ef8c59e04effbd2e7aa0034b30eeacb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
From the moment that we have ALIVE, we can receive notification that
are handled asynchronously.
Some notifications (for example iwl_rfi_support_notif) requires an
operational FW. So we need to make sure that they were handled in
iwl_op_mode_mld_start before we stop the FW. Flush the async_handlers_wk
there to achieve that.
Also, if loading the FW in op mode start failed, we need to cancel
these notifications, as they are from a dead FW.
More than that, not doing so can cause us to access freed memory
if async_handlers_wk is executed after ieee80211_free_hw is called.
Fix this by canceling all async notifications if a failure occurred in
init (after ALIVE).
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.1a8579662437.Ifd77d9c1a29fdd278b0a7bfc2709dd5d5e5efdb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit 75a3313f52b7e08e7e73746f69a68c2b7c28bb2b.
The indication of the BW limitation in the sub-device ID is not applicable
for Killer devices. For those devices, bw_limit will hold a random value,
so a matching dev_info might not be found, which leads to a probe
failure.
Until it is properly fixed, revert this.
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220029
Fixes: 75a3313f52b7 ("wifi: iwlwifi: make no_160 more generic")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420115541.36dd3007151e.I66b6b78db09bfea12ae84dd85603cf1583271474@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit 16a8d9a739430bec9c11eda69226c5a39f3478aa.
This device needs commit 75a3313f52b7 ("wifi: iwlwifi: make no_160 more generic"),
which has a bug and is being reverted until it is fixed.
Since this device wasn't shipped yet it is ok to not support it.
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220029
Fixes: 16a8d9a73943 ("wifi: iwlwifi: add support for BE213")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420115541.581160ae3e4b.Icecc46baee8a797c00ad04fab92d7d1114b84829@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This code was accidentally dropped during the cooked
monitor removal, but really should've been simplified
instead. Add the simple version back.
Fixes: 286e69677065 ("wifi: mac80211: Drop cooked monitor support")
Link: https://patch.msgid.link/20250422213251.b3d65fd0f323.Id2a6901583f7af86bbe94deb355968b238f350c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Yong Wang says:
====================
bridge: multicast: per vlan query improvement when port or vlan state changes
The current implementation of br_multicast_enable_port() only operates on
port's multicast context, which doesn't take into account in case of vlan
snooping, one downside is the port's igmp query timer will NOT resume when
port state gets changed from BR_STATE_BLOCKING to BR_STATE_FORWARDING etc.
Such code flow will briefly look like:
1.vlan snooping
--> br_multicast_port_query_expired with per vlan port_mcast_ctx
--> port in BR_STATE_BLOCKING state --> then one-shot timer discontinued
The port state could be changed by STP daemon or kernel STP, taking mstpd
as example:
2.mstpd --> netlink_sendmsg --> br_setlink --> br_set_port_state with non
blocking states, i.e. BR_STATE_LEARNING or BR_STATE_FORWARDING
--> br_port_state_selection --> br_multicast_enable_port
--> enable multicast with port's multicast_ctx
Here for per vlan snooping, the vlan context of the port should be used
instead of port's multicast_ctx. The first patch corrects such behavior.
Similarly, vlan state change also impacts multicast behavior, the 2nd patch
adds function to update the corresponding multicast context when vlan state
changes.
The 3rd patch adds the selftests to confirm that IGMP/MLD query does happen
when the STP state becomes forwarding.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change ALL_TESTS definition to "test-per-line".
Add the test case of per vlan snooping with port stp state change to
forwarding and also vlan equivalent case in both bridge_igmp.sh and
bridge_mld.sh.
Signed-off-by: Yong Wang <yongwang@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the vlan STP state is changed, which could be manipulated by
"bridge vlan" commands, similar to port STP state, this also impacts
multicast behaviors such as igmp query. In the scenario of per-VLAN
snooping, there's a need to update the corresponding multicast context
to re-arm the port query timer when vlan state becomes "forwarding" etc.
Update br_vlan_set_state() function to enable vlan multicast context
in such scenario.
Before the patch, the IGMP query does not happen in the last step of the
following test sequence, i.e. no growth for tx counter:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1
# bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0
# ip link add name swp1 up master br1 type dummy
# sleep 1
# bridge vlan set vid 1 dev swp1 state 4
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# sleep 1
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# bridge vlan set vid 1 dev swp1 state 3
# sleep 2
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
After the patch, the IGMP query happens in the last step of the test:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1
# bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0
# ip link add name swp1 up master br1 type dummy
# sleep 1
# bridge vlan set vid 1 dev swp1 state 4
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# sleep 1
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# bridge vlan set vid 1 dev swp1 state 3
# sleep 2
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
3
Signed-off-by: Yong Wang <yongwang@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a bridge port STP state is changed from BLOCKING/DISABLED to
FORWARDING, the port's igmp query timer will NOT re-arm itself if the
bridge has been configured as per-VLAN multicast snooping.
Solve this by choosing the correct multicast context(s) to enable/disable
port multicast based on whether per-VLAN multicast snooping is enabled or
not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast
snooping by re-implementing br_multicast_enable_port() and
br_multicast_disable_port() functions.
Before the patch, the IGMP query does not happen in the last step of the
following test sequence, i.e. no growth for tx counter:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1
# bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0
# ip link add name swp1 up master br1 type dummy
# bridge link set dev swp1 state 0
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# sleep 1
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# bridge link set dev swp1 state 3
# sleep 2
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
After the patch, the IGMP query happens in the last step of the test:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1
# bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0
# ip link add name swp1 up master br1 type dummy
# bridge link set dev swp1 state 0
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# sleep 1
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
1
# bridge link set dev swp1 state 3
# sleep 2
# ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]'
3
Signed-off-by: Yong Wang <yongwang@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
