| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio fixes from Rusty Russell:
"More virtio console fixes than I'm happy with, but all real issues,
and all CC:stable.."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio-scsi: Fix virtqueue affinity setup
virtio: console: return -ENODEV on all read operations after unplug
virtio: console: fix raising SIGIO after port unplug
virtio: console: clean up port data immediately at time of unplug
virtio: console: fix race in port_fops_open() and port unplug
virtio: console: fix race with port unplug and open/close
virtio/console: Add pipe_lock/unlock for splice_write
virtio/console: Quit from splice_write if pipe->nrbufs is 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Kevin Hilman:
- MSM: GPIO fixes (includes old code removal)
- OMAP: earlyprintk regression, AM33xx cpgmac PM regression
- OMAP5: urgent fix for potentially harmful voltage regulator values
- Renesas: gpio-keys fix, fix SD card detection, fix shdma calculation
error
- STi: critical SMP boot fix
- tegra: DTS fix for usb-phy
- a couple MAINTAINERS updates
(Arnd is on paternity leave, Kevin is stepping up to help arm-soc
maintenance)
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: add TI Keystone ARM platform
MAINTAINERS: delete Srinidhi from ux500
ARM: tegra: enable ULPI phy on Colibri T20
ARM: STi: remove sti_secondary_start from INIT section.
ARM: STi: Fix cpu nodes with correct device_type.
ARM: shmobile: lager: do not annotate gpio_buttons as __initdata
ARM: shmobile: BOCK-W: fix SDHI0 PFC settings
shdma: fixup sh_dmae_get_partial() calculation error
ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space
ARM: OMAP2+: hwmod: rt address space index for DT
ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state
ARM: OMAP2+: Avoid idling memory controllers with no drivers
ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL
ARM: dts: omap5-uevm: update optional/unused regulator configurations
ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC
ARM: dts: omap5-uevm: document regulator signals used on the actual board
ARM: msm: Consolidate gpiomux for older architectures
ARM: shmobile: armadillo800eva: Don't request GPIO 166 in board code
ARM: msm: dts: Fix the gpio register address for msm8960
|
|
This reverts commit 318df36e57c0ca9f2146660d41ff28e8650af423.
This commit caused Steven Rostedt's hackbench runs to run out of memory
due to a leak. As noted by Joonsoo Kim, it is buggy in the following
scenario:
"I guess, you may set 0 to all kmem caches's cpu_partial via sysfs,
doesn't it?
In this case, memory leak is possible in following case. Code flow of
possible leak is follwing case.
* in __slab_free()
1. (!new.inuse || !prior) && !was_frozen
2. !kmem_cache_debug && !prior
3. new.frozen = 1
4. after cmpxchg_double_slab, run the (!n) case with new.frozen=1
5. with this patch, put_cpu_partial() doesn't do anything,
because this cache's cpu_partial is 0
6. return
In step 5, leak occur"
And Steven does indeed have cpu_partial set to 0 due to RT testing.
Joonsoo is cooking up a patch, but everybody agrees that reverting this
for now is the right thing to do.
Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
there is an additional "{", which causes building error.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
|
|
It takes an unsigned value. This happens not to blow up on 64-bit
architectures, but it does on 32-bit, causing
drm_calc_vbltimestamp_from_scanoutpos() to calculate totally bogus
timestamps for vblank events. Which in turn causes e.g. gnome-shell to
hang after a DPMS off cycle with current xf86-video-ati Git.
[airlied: regression introduced in drm: use monotonic time in drm_calc_vbltimestamp_from_scanoutpos]
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59836
Tested-by: shui yangwei <yangweix.shui@intel.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Some more radeon fixes. Mostly dpm and uvd fixes. Fixes hangs
with dpm on more rv6xx asics, and fixes suspend and resume with UVD.
* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: make missing smc ucode non-fatal
drm/radeon/dpm: require rlc for dpm
drm/radeon/cik: use a mutex to properly lock srbm instanced registers
drm/radeon: remove unnecessary unpin
drm/radeon: add more UVD CS checking
drm/radeon: stop sending invalid UVD destroy msg
drm/radeon: only save UVD bo when we have open handles
drm/radeon: always program the MC on startup
drm/radeon: fix audio dto calculation on DCE3+ (v3)
drm/radeon/dpm: disable sclk ss on rv6xx
drm/radeon: fix halting UVD
drm/radeon/dpm: adjust power state properly for UVD on SI
drm/radeon/dpm: fix spread spectrum setup (v2)
drm/radeon/dpm: adjust thermal protection requirements
drm/radeon: select audio dto based on encoder id for DCE3
drm/radeon: properly handle pm on gpu reset
|
|
The smc ucode is required for dpm (dynamic power
management), but if it's missing just skip dpm setup
and don't disable acceleration.
Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=67876
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The rlc is required for dpm to work properly, so if
the rlc ucode is missing, don't enable dpm. Enabling
dpm without the rlc enabled can result in hangs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need proper locking in the driver when accessing instanced
registers on CIK.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We don't pin the BO on allocation, so don't unpin it on free.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Improve error handling in case userspace sends us
an invalid command buffer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We also need to check the handle.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise just reinitialize from scratch on resume,
and so make it more likely to succeed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For r6xx+ asics. This mirrors the behavior of pre-r6xx
asics. We need to program the MC even if something
else in startup() fails. Failure to do so results in
an unusable GPU.
Based on a fix from: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to set the wallclock ratio and adjust the phase
and module registers appropriately. May fix problems
with audio timing at certain display timings.
v2: properly handle clocks below 24mhz
v3: rebase r600 changes
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enabling spread spectrum on the engine clock
leads to hangs on some asics.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=66963
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Removing the clock/power or resetting the VCPU can cause
hangs if that happens in the middle of a register write.
Stall the memory and register bus before putting the VCPU
into reset. Keep it in reset when unloading the module or
suspending.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are some hardware issue with reclocking on SI when
UVD is active, so use a stable power state when UVD is
active. Fixes possible hangs and performance issues when
using UVD on SI.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to check for engine and memory clock ss separately
and only enable dynamic ss if either of them are found.
This should fix systems which have a ss table, but do
not have entries for engine or memory. On those systems
we may enable dynamic spread spectrum without enabling
it on the engine or memory clocks which can lead to a
hang in some cases.
fixes some systems reported here:
https://bugs.freedesktop.org/show_bug.cgi?id=66963
v2: fix typo
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On rv770 and newer, clock gating is not required
for thermal protection. The only requirement is that
the design utilizes a thermal sensor.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are two audio dtos on radeon asics that you can
select between. Normally, dto0 is used for hdmi and
dto1 for DP, but it seems that the dto is somehow
tied to the encoders on DCE3 asics.
fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=67435
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
When we reset the GPU, we need to properly tear
down power management before reseting the GPU and then
set it back up again after reset. Add the missing
radeon_pm_[suspend|resume] calls to the gpu reset
function.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Oleg Nesterov has been working hard in closing all the holes that can
lead to race conditions between deleting an event and accessing an
event debugfs file. This included a fix to the debugfs system (acked
by Greg Kroah-Hartman). We think that all the holes have been patched
and hopefully we don't find more. I haven't marked all of them for
stable because I need to examine them more to figure out how far back
some of the changes need to go.
Along the way, some other fixes have been made. Alexander Z Lam fixed
some logic where the wrong buffer was being modifed.
Andrew Vagin found a possible corruption for machines that actually
allocate cpumask, as a reference to one was being zeroed out by
mistake.
Dhaval Giani found a bad prototype when tracing is not configured.
And I not only had some changes to help Oleg, but also finally fixed a
long standing bug that Dave Jones and others have been hitting, where
a module unload and reload can cause the function tracing accounting
to get screwed up"
* tag 'trace-fixes-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix reset of time stamps during trace_clock changes
tracing: Make TRACE_ITER_STOP_ON_FREE stop the correct buffer
tracing: Fix trace_dump_stack() proto when CONFIG_TRACING is not set
tracing: Fix fields of struct trace_iterator that are zeroed by mistake
tracing/uprobes: Fail to unregister if probe event files are in use
tracing/kprobes: Fail to unregister if probe event files are in use
tracing: Add comment to describe special break case in probe_remove_event_call()
tracing: trace_remove_event_call() should fail if call/file is in use
debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs)
ftrace: Check module functions being traced on reload
ftrace: Consolidate some duplicate code for updating ftrace ops
tracing: Change remove_event_file_dir() to clear "d_subdirs"->i_private
tracing: Introduce remove_event_file_dir()
tracing: Change f_start() to take event_mutex and verify i_private != NULL
tracing: Change event_filter_read/write to verify i_private != NULL
tracing: Change event_enable/disable_read() to verify i_private != NULL
tracing: Turn event/id->i_private into call->event.type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: add missing check for __O_TMPFILE in fcntl_init()
fs: Allow unprivileged linkat(..., AT_EMPTY_PATH) aka flink
fs: Fix file mode for O_TMPFILE
reiserfs: fix deadlock in umount
|
|
Adding maintainer for arch/arm/mach-keystone/
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
Srinidhi's mail address is now bouncing and he has requested
me to delete this entry.
Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
On muxed systems, the other vgaswitcheroo client may depend on i915 to
handle the backlight. We began switching off the backlight since
commit a261b246ebd552fd5d5a8ed84cc931bb821c427f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 26 19:21:47 2012 +0200
drm/i915: disable all crtcs at suspend time
breaking backlight on discreet graphics in (some) muxed systems.
Keep the backlight on when the state is changed through vgaswitcheroo.
Note: The alternative would be to add a quirk table to achieve the same
based on system identifiers, but AFAICS it would asymptotically approach
effectively the same as this patch as more IDs are added, but with the
maintenance burden of the quirk table.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55311
Tested-by: Fede <fedevx@yahoo.com>
Tested-by: Aximab <laurent.debian@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59785
Tested-by: sfievet <sebastien.fievet@free.fr>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The SDVO code tries to compare the encoder's and crtc's idea of the
pixel_multiplier. Normally they have to match, but when transitioning
to DPMS off, we turn off the pipe before reading out the pipe_config,
so the pixel_multiplier in the pipe_config will be 0, whereas the
encoder will still have its pixel_multiplier set to whatever value we
were using when the display was active. This leads to a warning
from intel_modeset_check_state().
WARNING: CPU: 1 PID: 2846 at drivers/gpu/drm/i915/intel_sdvo.c:1378 intel_sdvo_get_config+0x158/0x160()
SDVO pixel multiplier mismatch, port: 0, encoder: 1
Modules linked in: snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep
CPU: 1 PID: 2846 Comm: Xorg Not tainted 3.11.0-rc3-00208-gbe1e8d7-dirty #19
Hardware name: Apple Computer, Inc. Macmini1,1/Mac-F4208EC8, BIOS MM11.88Z.0055.B03.0604071521 04/07/06
00000000 00000000 ef0afa54 c1597bbb c1737ea4 ef0afa84 c10392ca c1737e6c
ef0afab0 00000b1e c1737ea4 00000562 c12dfbe8 c12dfbe8 ef0afb14 00000000
f697ec00 ef0afa9c c103936e 00000009 ef0afa94 c1737e6c ef0afab0 ef0afadc
Call Trace:
[<c1597bbb>] dump_stack+0x41/0x56
[<c10392ca>] warn_slowpath_common+0x7a/0xa0
[<c103936e>] warn_slowpath_fmt+0x2e/0x30
[<c12dfbe8>] intel_sdvo_get_config+0x158/0x160
[<c12c3220>] check_crtc_state+0x1e0/0xb10
[<c12cdc7d>] intel_modeset_check_state+0x29d/0x7c0
[<c12dfe5c>] intel_sdvo_dpms+0x5c/0xa0
[<c12985de>] drm_mode_obj_set_property_ioctl+0x40e/0x420
[<c1298625>] drm_mode_connector_property_set_ioctl+0x35/0x40
[<c1289294>] drm_ioctl+0x3e4/0x540
[<c10fc1a2>] do_vfs_ioctl+0x72/0x570
[<c10fc72f>] SyS_ioctl+0x8f/0xa0
[<c159b7fa>] sysenter_do_call+0x12/0x22
---[ end trace 7ce940aff1366d60 ]---
Fix the problem by skipping the encoder get_config() function for
inactive encoders.
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Some card's max brightness level is pretty large, e.g. on Acer Aspire
4732Z, the max level is 989910. If user space set a large enough level
then the current scale done in intel_panel_set_backlight will cause an
integer overflow and the scaled level will be mistakenly small, leaving
user with an almost black screen. This patch fixes this problem.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
[danvet: Add a comment to explain what's going on.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The DRM layer keeps track of our vblanks and it assumes our vblank
counters only go back to zero when they overflow. The problem is that
when we disable the power well our counters also go to zero, but it
doesn't mean they did overflow. So on this patch we grab the lock and
update last_vblank so the DRM layer won't think our counters
overflowed.
This patch fixes the following intel-gpu-tools test:
./kms_flip --run-subtest blocking-absolute-wf_vblank
Regression introduced by the following commit:
commit bf51d5e2cda5d36d98e4b46ac7fca9461e512c41
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Wed Jul 3 17:12:13 2013 -0300
drm/i915: switch disable_power_well default value to 1
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66808
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Added a comment that this might be better done in
drm_vblank_post_modeset in general.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Apparently Bspec is wrong in this case here even for gm45. Note that
Bspec is horribly misguided on i965g/gm, so we don't have any other
data points besides that it seems to make machines work better.
With this changes all the bits in PORT_HOTPLUG_STAT for the digital
ports are ordered the same way. This seems to agree with what register
dumps from the hpd storm handling code shows, where the LIVE bit and
the short/long pulse STATUS bits light up at the same time with this
enumeration (but no with the one from Bspec).
Also tested on my gm45 which has two DP+ ports, and everything seems
to still work as expected.
References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg23054.html
Cc: Egbert Eich <eich@suse.com>
Cc: Jan Niggemann <jn@hz6.de>
Tested-by: Jan Niggemann <jn@hz6.de>
[danvet: Add a big warning that Bspec seems to be wrong for these
bits, suggested by Jani.]
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
same fix as cirrus and mgag200.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
When a BO gets pinned the placement may get changed. If the memory is
mapped into user space and user space has already accessed the mapped
range the page tables are set up but now point to the wrong memory.
Set bo.mdev->dev_mapping in mgag200_bo_create() to make sure that
ttm_bo_unmap_virtual() called from ttm_bo_handle_move_mem() will take
care of this.
v2: Don't call ttm_bo_unmap_virtual() in mgag200_bo_pin(), fix comment.
Signed-off-by: Egbert Eich <eich@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This is a cirrus version of Egbert Eich's patch for mgag200.
Without bo.bdev->dev_mapping set, the ttm_bo_unmap_virtual_locked
called from ttm_bo_handle_move_mem returns with no effect. If any
application accessed the memory before it was moved, it will
access wrong memory next time. This causes crashes when changing
resolution down.
Signed-off-by: Michal Srb <msrb@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fix from Tejun Heo:
"Just the addition of MODULE_DEVICE_TABLE() for a platform driver"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
pata_imx: expose module alias for loading from device-tree
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Fix for a minor memory leak bug in the cgroup init failure path"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix a leak when percpu_ref_init() fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull two workqueue fixes from Tejun Heo:
"A lockdep notation update so that nested work_on_cpu() invocations
don't lead to spurious lockdep warnings and fix for an unbound attr
bug which made what's shown in sysfs deviate from the actual ones.
Both patches have pretty limited scope"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: copy workqueue_attrs with all fields
workqueue: allow work_on_cpu() to be called recursively
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Peter Anvin.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, amd, microcode: Fix error path in apply_microcode_amd()
x86, fpu: correct the asm constraints for fxsave, unbreak mxcsr.daz
x86, efi: correct call to free_pages
x86/iommu/vt-d: Expand interrupt remapping quirk to cover x58 chipset
|
|
Some of my configs I test with have CONFIG_A11Y_BRAILLE_CONSOLE set.
When I started testing against v3.11-rc4 my console went bonkers. Using
ktest to bisect the issue, it came down to:
commit bbeddf52a "printk: move braille console support into separate
braille.[ch] files"
Looking into the patch I found the problem. It's with the return of
braille_register_console(). As anything other than NULL is considered a
failure.
But for those of us that have CONFIG_A11Y_BRAILLE_CONSOLE set but do not
define a "brl" or "brl=" on the command line, we still may want a
console that those with sight can still use.
Return NULL (success) if "brl" or "brl=" is not on the console line.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit fab840fc2d542fabcab903db8e03589a6702ba5f.
This commit even has the test-case to prove that the tracee
can be killed by SIGTRAP if the debugger does not remove the
breakpoints before PTRACE_DETACH.
However, this is exactly what wineserver deliberately does,
set_thread_context() calls PTRACE_ATTACH + PTRACE_DETACH just
for PTRACE_POKEUSER(DR*) in between.
So we should revert this fix and document that PTRACE_DETACH
should keep the breakpoints.
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull MIPS fixes from Ralf Baechle:
"Two platform-specific fixes plus a fix for oprofile which was calling
smp_processor_id() in preemptible code"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: BMIPS: fix hardware interrupt routing for boot CPU != 0
MIPS: oprofile: Fix BUG due to smp_processor_id() in preemptible code.
MIPS: PNX833x: PNX8335_PCI_ETHERNET_INT depends on CONFIG_SOC_PNX8335
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Enable LZ4 compression for the kernel image, add the machine id for
the new zBC12 model, fix an issue with hanging dasd devices, correct a
Kconfig dependency, fix a compile error in the perf module with
CONFIG_KVM=n and fix the find_next_bit_left primitive for the PCI base
layer"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix hanging devices after path events
s390/perf: fix compile error (undefined reference sie_exit)
s390/bitops: fix find_next_bit_left
s390: add support for IBM zBC12 machine
s390/Kconfig: select 'TTY' when 'S390_GUEST' is enabled
s390: add support for LZ4-compressed kernel
|
|
unshare_userns(new_cred) does *new_cred = prepare_creds() before
create_user_ns() which can fail. However, the caller expects that
it doesn't need to take care of new_cred if unshare_userns() fails.
We could change the single caller, sys_unshare(), but I think it
would be more clean to avoid the side effects on failure, so with
this patch unshare_userns() does put_cred() itself and initializes
*new_cred only if create_user_ns() succeeeds.
Cc: stable@vger.kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
regmap.h requires linux/err.h if CONFIG_REGMAP is not defined. Without it I get
error.
CC drivers/media/platform/exynos4-is/fimc-reg.o
In file included from drivers/media/platform/exynos4-is/fimc-reg.c:14:0:
include/linux/regmap.h: In function ‘regmap_write’:
include/linux/regmap.h:525:10: error: ‘EINVAL’ undeclared (first use in this function)
include/linux/regmap.h:525:10: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@kernel.org
|
|
The original implementation of the Smack IPv6 port based
local controls works most of the time using a sockaddr as
a temporary variable, but not always as it overflows in
some circumstances. The correct data is a sockaddr_in6.
A struct sockaddr isn't as large as a struct sockaddr_in6.
There would need to be casting one way or the other. This
patch gets it the right way.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
regcache_sync_block_raw_flush() expects the address of the register after last
register that needs to be synced as its parameter. But the last call to
regcache_sync_block_raw_flush() in regcache_sync_block_raw() passes the address
of the last register in the block. This effectively always skips over the last
register in a block, even if it needs to be synced. In order to fix it increase
the address by one register.
The issue was introduced in commit 75a5f89 ("regmap: cache: Write consecutive
registers in a single block write").
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
As comment in include/uapi/asm-generic/fcntl.h described, when
introducing new O_* bits, we need to check its uniqueness in
fcntl_init(). But __O_TMPFILE bit is missing. So fix it.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Every now and then someone proposes a new flink syscall, and this spawns
a long discussion of whether it would be a security problem. I think
that this is missing the point: flink is *already* allowed without
privilege as long as /proc is mounted -- it's called AT_SYMLINK_FOLLOW.
Now that O_TMPFILE is here, the ability to create a file with O_TMPFILE,
write it, and link it in is very convenient. The only problem is that
it requires that /proc be mounted so that you can do:
linkat(AT_FDCWD, "/proc/self/fd/<tmpfd>", dfd, path, AT_SYMLINK_NOFOLLOW)
This sucks -- it's much nicer to do:
linkat(tmpfd, "", dfd, path, AT_EMPTY_PATH)
Let's allow it.
If this turns out to be excessively scary, it we could instead require
that the inode in question be I_LINKABLE, but this seems pointless given
the /proc situation
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
O_TMPFILE, like O_CREAT, should respect the requested mode and should
create regular files.
This fixes two bugs: O_TMPFILE required privilege (because the mode
ended up as 000) and it produced bogus inodes with no type.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
