summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-15KVM: VMX: Add helper to check reserved bits in IA32_PERF_GLOBAL_CTRLOliver Upton
Create a helper function to check the validity of a proposed value for IA32_PERF_GLOBAL_CTRL from the existing check in intel_pmu_set_msr(). Per Intel's SDM, the reserved bits in IA32_PERF_GLOBAL_CTRL must be cleared for the corresponding host/guest state fields. Suggested-by: Jim Mattson <jmattson@google.com> Co-developed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15selftests: kvm: Simplify loop in kvm_create_max_vcpus testWainer dos Santos Moschetta
On kvm_create_max_vcpus test remove unneeded local variable in the loop that add vcpus to the VM. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: x86: Optimization: Requst TLB flush in fast_cr3_switch() instead of do ↵Liran Alon
it directly When KVM emulates a nested VMEntry (L1->L2 VMEntry), it switches mmu root page. If nEPT is used, this will happen from kvm_init_shadow_ept_mmu()->__kvm_mmu_new_cr3() and otherwise it will happpen from nested_vmx_load_cr3()->kvm_mmu_new_cr3(). Either case, __kvm_mmu_new_cr3() will use fast_cr3_switch() in attempt to switch to a previously cached root page. In case fast_cr3_switch() finds a matching cached root page, it will set it in mmu->root_hpa and request KVM_REQ_LOAD_CR3 such that on next entry to guest, KVM will set root HPA in appropriate hardware fields (e.g. vmcs->eptp). In addition, fast_cr3_switch() calls kvm_x86_ops->tlb_flush() in order to flush TLB as MMU root page was replaced. This works as mmu->root_hpa, which vmx_flush_tlb() use, was already replaced in cached_root_available(). However, this may result in unnecessary INVEPT execution because a KVM_REQ_TLB_FLUSH may have already been requested. For example, by prepare_vmcs02() in case L1 don't use VPID. Therefore, change fast_cr3_switch() to just request TLB flush on next entry to guest. Reviewed-by: Bhavesh Davda <bhavesh.davda@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: x86/vPMU: Add lazy mechanism to release perf_event per vPMCLike Xu
Currently, a host perf_event is created for a vPMC functionality emulation. It’s unpredictable to determine if a disabled perf_event will be reused. If they are disabled and are not reused for a considerable period of time, those obsolete perf_events would increase host context switch overhead that could have been avoided. If the guest doesn't WRMSR any of the vPMC's MSRs during an entire vcpu sched time slice, and its independent enable bit of the vPMC isn't set, we can predict that the guest has finished the use of this vPMC, and then do request KVM_REQ_PMU in kvm_arch_sched_in and release those perf_events in the first call of kvm_pmu_handle_event() after the vcpu is scheduled in. This lazy mechanism delays the event release time to the beginning of the next scheduled time slice if vPMC's MSRs aren't changed during this time slice. If guest comes back to use this vPMC in next time slice, a new perf event would be re-created via perf_event_create_kernel_counter() as usual. Suggested-by: Wei Wang <wei.w.wang@intel.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counterLike Xu
The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: x86/vPMU: Introduce a new kvm_pmu_ops->msr_idx_to_pmc callbackLike Xu
Introduce a new callback msr_idx_to_pmc that returns a struct kvm_pmc*, and change kvm_pmu_is_valid_msr to return ".msr_idx_to_pmc(vcpu, msr) || .is_valid_msr(vcpu, msr)" and AMD just returns false from .is_valid_msr. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: x86/vPMU: Rename pmu_ops callbacks from msr_idx to rdpmc_ecxLike Xu
The leagcy pmu_ops->msr_idx_to_pmc is only called in kvm_pmu_rdpmc, so this function actually receives the contents of ECX before RDPMC, and translates it to a kvm_pmc. Let's clarify its semantic by renaming the existing msr_idx_to_pmc to rdpmc_ecx_to_pmc, and is_valid_msr_idx to is_valid_rdpmc_ecx; likewise for the wrapper kvm_pmu_is_valid_msr_idx. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15perf/core: Provide a kernel-internal interface to pause perf_eventLike Xu
Exporting perf_event_pause() as an external accessor for kernel users (such as KVM) who may do both disable perf_event and read count with just one time to hold perf_event_ctx_lock. Also the value could be reset optionally. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Like Xu <like.xu@linux.intel.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15perf/core: Provide a kernel-internal interface to recalibrate event periodLike Xu
Currently, perf_event_period() is used by user tools via ioctl. Based on naming convention, exporting perf_event_period() for kernel users (such as KVM) who may recalibrate the event period for their assigned counter according to their requirements. The perf_event_period() is an external accessor, just like the perf_event_{en,dis}able() and should thus use perf_event_ctx_lock(). Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: nVMX: Update vmcs01 TPR_THRESHOLD if L2 changed L1 TPRLiran Alon
When L1 don't use TPR-Shadow to run L2, L0 configures vmcs02 without TPR-Shadow and install intercepts on CR8 access (load and store). If L1 do not intercept L2 CR8 access, L0 intercepts on those accesses will emulate load/store on L1's LAPIC TPR. If in this case L2 lowers TPR such that there is now an injectable interrupt to L1, apic_update_ppr() will request a KVM_REQ_EVENT which will trigger a call to update_cr8_intercept() to update TPR-Threshold to highest pending IRR priority. However, this update to TPR-Threshold is done while active vmcs is vmcs02 instead of vmcs01. Thus, when later at some point L0 will emulate an exit from L2 to L1, L1 will still run with high TPR-Threshold. This will result in every VMEntry to L1 to immediately exit on TPR_BELOW_THRESHOLD and continue to do so infinitely until some condition will cause KVM_REQ_EVENT to be set. (Note that TPR_BELOW_THRESHOLD exit handler do not set KVM_REQ_EVENT until apic_update_ppr() will notice a new injectable interrupt for PPR) To fix this issue, change update_cr8_intercept() such that if L2 lowers L1's TPR in a way that requires to lower L1's TPR-Threshold, save update to TPR-Threshold and apply it to vmcs01 when L0 emulates an exit from L2 to L1. Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: VMX: Refactor update_cr8_intercept()Liran Alon
No functional changes. Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: SVM: Remove check if APICv enabled in SVM update_cr8_intercept() handlerLiran Alon
This check is unnecessary as x86 update_cr8_intercept() which calls this VMX/SVM specific callback already performs this check. Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: APIC: add helper func to remove duplicate code in kvm_pv_send_ipiMiaohe Lin
There are some duplicate code in kvm_pv_send_ipi when deal with ipi bitmap. Add helper func to remove it, and eliminate odd out label, get rid of unnecessary kvm_lapic_irq field init and so on. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: X86: avoid unused setup_syscalls_segments call when SYSCALL check failedMiaohe Lin
When SYSCALL/SYSENTER ability check failed, cs and ss is inited but remain not used. Delay initializing cs and ss until SYSCALL/SYSENTER ability check passed. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: MMIO: get rid of odd out_err label in kvm_coalesced_mmio_initMiaohe Lin
The out_err label and var ret is unnecessary, clean them up. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: VMX: Consume pending LAPIC INIT event when exit on INIT_SIGNALLiran Alon
Intel SDM section 25.2 OTHER CAUSES OF VM EXITS specifies the following on INIT signals: "Such exits do not modify register state or clear pending events as they would outside of VMX operation." When commit 4b9852f4f389 ("KVM: x86: Fix INIT signal handling in various CPU states") was applied, I interepted above Intel SDM statement such that INIT_SIGNAL exit don’t consume the LAPIC INIT pending event. However, when Nadav Amit run matching kvm-unit-test on a bare-metal machine, it turned out my interpetation was wrong. i.e. INIT_SIGNAL exit does consume the LAPIC INIT pending event. (See: https://www.spinics.net/lists/kvm/msg196757.html) Therefore, fix KVM code to behave as observed on bare-metal. Fixes: 4b9852f4f389 ("KVM: x86: Fix INIT signal handling in various CPU states") Reported-by: Nadav Amit <nadav.amit@gmail.com> Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: x86: Prevent set vCPU into INIT/SIPI_RECEIVED state when INIT are latchedLiran Alon
Commit 4b9852f4f389 ("KVM: x86: Fix INIT signal handling in various CPU states") fixed KVM to also latch pending LAPIC INIT event when vCPU is in VMX operation. However, current API of KVM_SET_MP_STATE allows userspace to put vCPU into KVM_MP_STATE_SIPI_RECEIVED or KVM_MP_STATE_INIT_RECEIVED even when vCPU is in VMX operation. Fix this by introducing a util method to check if vCPU state latch INIT signals and use it in KVM_SET_MP_STATE handler. Fixes: 4b9852f4f389 ("KVM: x86: Fix INIT signal handling in various CPU states") Reported-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: x86: Evaluate latched_init in KVM_SET_VCPU_EVENTS when vCPU not in SMMLiran Alon
Commit 4b9852f4f389 ("KVM: x86: Fix INIT signal handling in various CPU states") fixed KVM to also latch pending LAPIC INIT event when vCPU is in VMX operation. However, current API of KVM_SET_VCPU_EVENTS defines this field as part of SMM state and only set pending LAPIC INIT event if vCPU is specified to be in SMM mode (events->smi.smm is set). Change KVM_SET_VCPU_EVENTS handler to set pending LAPIC INIT event by latched_init field regardless of if vCPU is in SMM mode or not. Fixes: 4b9852f4f389 ("KVM: x86: Fix INIT signal handling in various CPU states") Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15x86: retpolines: eliminate retpoline from msr event handlersAndrea Arcangeli
It's enough to check the value and issue the direct call. After this commit is applied, here the most common retpolines executed under a high resolution timer workload in the guest on a VMX host: [..] @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_rax+33 do_syscall_64+89 entry_SYSCALL_64_after_hwframe+68 ]: 267 @[]: 2256 @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_rax+33 __kvm_wait_lapic_expire+284 vmx_vcpu_run.part.97+1091 vcpu_enter_guest+377 kvm_arch_vcpu_ioctl_run+261 kvm_vcpu_ioctl+559 do_vfs_ioctl+164 ksys_ioctl+96 __x64_sys_ioctl+22 do_syscall_64+89 entry_SYSCALL_64_after_hwframe+68 ]: 2390 @[]: 33410 @total: 315707 Note the highest hit above is __delay so probably not worth optimizing even if it would be more frequent than 2k hits per sec. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: retpolines: x86: eliminate retpoline from svm.c exit handlersAndrea Arcangeli
It's enough to check the exit value and issue a direct call to avoid the retpoline for all the common vmexit reasons. After this commit is applied, here the most common retpolines executed under a high resolution timer workload in the guest on a SVM host: [..] @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_rax+33 ktime_get_update_offsets_now+70 hrtimer_interrupt+131 smp_apic_timer_interrupt+106 apic_timer_interrupt+15 start_sw_timer+359 restart_apic_timer+85 kvm_set_msr_common+1497 msr_interception+142 vcpu_enter_guest+684 kvm_arch_vcpu_ioctl_run+261 kvm_vcpu_ioctl+559 do_vfs_ioctl+164 ksys_ioctl+96 __x64_sys_ioctl+22 do_syscall_64+89 entry_SYSCALL_64_after_hwframe+68 ]: 1940 @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_r12+33 force_qs_rnp+217 rcu_gp_kthread+1270 kthread+268 ret_from_fork+34 ]: 4644 @[]: 25095 @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_rax+33 lapic_next_event+28 clockevents_program_event+148 hrtimer_start_range_ns+528 start_sw_timer+356 restart_apic_timer+85 kvm_set_msr_common+1497 msr_interception+142 vcpu_enter_guest+684 kvm_arch_vcpu_ioctl_run+261 kvm_vcpu_ioctl+559 do_vfs_ioctl+164 ksys_ioctl+96 __x64_sys_ioctl+22 do_syscall_64+89 entry_SYSCALL_64_after_hwframe+68 ]: 41474 @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_rax+33 clockevents_program_event+148 hrtimer_start_range_ns+528 start_sw_timer+356 restart_apic_timer+85 kvm_set_msr_common+1497 msr_interception+142 vcpu_enter_guest+684 kvm_arch_vcpu_ioctl_run+261 kvm_vcpu_ioctl+559 do_vfs_ioctl+164 ksys_ioctl+96 __x64_sys_ioctl+22 do_syscall_64+89 entry_SYSCALL_64_after_hwframe+68 ]: 41474 @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_rax+33 ktime_get+58 clockevents_program_event+84 hrtimer_start_range_ns+528 start_sw_timer+356 restart_apic_timer+85 kvm_set_msr_common+1497 msr_interception+142 vcpu_enter_guest+684 kvm_arch_vcpu_ioctl_run+261 kvm_vcpu_ioctl+559 do_vfs_ioctl+164 ksys_ioctl+96 __x64_sys_ioctl+22 do_syscall_64+89 entry_SYSCALL_64_after_hwframe+68 ]: 41887 @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_rax+33 lapic_next_event+28 clockevents_program_event+148 hrtimer_try_to_cancel+168 hrtimer_cancel+21 kvm_set_lapic_tscdeadline_msr+43 kvm_set_msr_common+1497 msr_interception+142 vcpu_enter_guest+684 kvm_arch_vcpu_ioctl_run+261 kvm_vcpu_ioctl+559 do_vfs_ioctl+164 ksys_ioctl+96 __x64_sys_ioctl+22 do_syscall_64+89 entry_SYSCALL_64_after_hwframe+68 ]: 42723 @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_rax+33 clockevents_program_event+148 hrtimer_try_to_cancel+168 hrtimer_cancel+21 kvm_set_lapic_tscdeadline_msr+43 kvm_set_msr_common+1497 msr_interception+142 vcpu_enter_guest+684 kvm_arch_vcpu_ioctl_run+261 kvm_vcpu_ioctl+559 do_vfs_ioctl+164 ksys_ioctl+96 __x64_sys_ioctl+22 do_syscall_64+89 entry_SYSCALL_64_after_hwframe+68 ]: 42766 @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_rax+33 ktime_get+58 clockevents_program_event+84 hrtimer_try_to_cancel+168 hrtimer_cancel+21 kvm_set_lapic_tscdeadline_msr+43 kvm_set_msr_common+1497 msr_interception+142 vcpu_enter_guest+684 kvm_arch_vcpu_ioctl_run+261 kvm_vcpu_ioctl+559 do_vfs_ioctl+164 ksys_ioctl+96 __x64_sys_ioctl+22 do_syscall_64+89 entry_SYSCALL_64_after_hwframe+68 ]: 42848 @[ trace_retpoline+1 __trace_retpoline+30 __x86_indirect_thunk_rax+33 ktime_get+58 start_sw_timer+279 restart_apic_timer+85 kvm_set_msr_common+1497 msr_interception+142 vcpu_enter_guest+684 kvm_arch_vcpu_ioctl_run+261 kvm_vcpu_ioctl+559 do_vfs_ioctl+164 ksys_ioctl+96 __x64_sys_ioctl+22 do_syscall_64+89 entry_SYSCALL_64_after_hwframe+68 ]: 499845 @total: 1780243 SVM has no TSC based programmable preemption timer so it is invoking ktime_get() frequently. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: retpolines: x86: eliminate retpoline from vmx.c exit handlersAndrea Arcangeli
It's enough to check the exit value and issue a direct call to avoid the retpoline for all the common vmexit reasons. Of course CONFIG_RETPOLINE already forbids gcc to use indirect jumps while compiling all switch() statements, however switch() would still allow the compiler to bisect the case value. It's more efficient to prioritize the most frequent vmexits instead. The halt may be slow paths from the point of the guest, but not necessarily so from the point of the host if the host runs at full CPU capacity and no host CPU is ever left idle. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15KVM: x86: optimize more exit handlers in vmx.cAndrea Arcangeli
Eliminate wasteful call/ret non RETPOLINE case and unnecessary fentry dynamic tracing hooking points. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15sched/uclamp: Fix incorrect conditionQais Yousef
uclamp_update_active() should perform the update when p->uclamp[clamp_id].active is true. But when the logic was inverted in [1], the if condition wasn't inverted correctly too. [1] https://lore.kernel.org/lkml/20190902073836.GO2369@hirez.programming.kicks-ass.net/ Reported-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Cc: Ben Segall <bsegall@google.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Patrick Bellasi <patrick.bellasi@matbug.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: babbe170e053 ("sched/uclamp: Update CPU's refcount on TG's clamp changes") Link: https://lkml.kernel.org/r/20191114211052.15116-1-qais.yousef@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-15KVM: Add a comment describing the /dev/kvm no_compat handlingMarc Zyngier
Add a comment explaining the rational behind having both no_compat open and ioctl callbacks to fend off compat tasks. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-15Bluetooth: btusb: fix PM leak in error case of setupOliver Neukum
If setup() fails a reference for runtime PM has already been taken. Proper use of the error handling in btusb_open()is needed. You cannot just return. Fixes: ace31982585a3 ("Bluetooth: btusb: Add setup callback for chip init on USB") Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-15Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.5. Major changes: ath10k * request for PM_QOS_CPU_DMA_LATENCY to improve firmware initialisation time
2019-11-15iwlwifi: mvm: fix non-ACPI functionJohannes Berg
The code now compiles without ACPI, but there's a warning since iwl_mvm_get_ppag_table() isn't used, and iwl_mvm_ppag_init() must not unconditionally fail but return success instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: 22000: fix some indentationJohannes Berg
Somehow two tabs snuck into this file where just one should be used, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560Johannes Berg
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: sync the iwl_mvm_session_prot_notif layoutEmmanuel Grumbach
The firmware API has changed a little bit but this change has no impact on the flow and is backward compatible. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: start CTDP budget from 2400mAMordechay Goodstein
The current budget of 2000mA is preventing us from reaching maximum throughput. According to our system engineers, we can increase the maximum budget to 2400mA to solve this problem. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: don't skip mgmt tid when flushing all tidsHaim Dreyfuss
There are various of flows which require tids flushing (disconnection, suspend, etc...). Currently, when the driver instructs the FW to flush he masks all the data tids(0-7). However, the driver doesn't set the management tid (#15) which cause the FW not to flush it. When the FW tries to remove the mgmt queue he throws an assert since it is not an empty queue. instead of just set only the data tids set everything and let the FW ignore the invalid tids. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: scan: enable adaptive dwell in p2pShahar S Matityahu
Align to the requirement update and support adaptive dwell in p2p scan. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: refactor the SAR tables from mvm to acpiIhab Zhaika
Refactored the SAR related functions from iwlmvm to acpi in order to make it shared between different opmodes in addition to removing unused variable ppag_rev. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: support scan req cmd ver 12Shahar S Matityahu
Implement scan request command version 12. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: make new scan req versioning flowShahar S Matityahu
Implement a new versioning handling flow supported from version 11 onwards. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: fix unaligned read of rx_pkt_statusWang Xuerui
This is present since the introduction of iwlmvm. Example stack trace on MIPS: [<ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm] [<ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi] Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the problem. No other unaligned accesses are spotted yet. Signed-off-by: Wang Xuerui <wangxuerui@qiniu.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: remove redundant assignment to variable bufszColin Ian King
The variable bufsz is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: bump FW API to 51 for 22000 seriesLuca Coelho
Start supporting API version 51 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: FW API: reference enum in docs of modify_maskJohannes Berg
Add a reference to the correct enum rather than showing the pattern of the actual constants. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: print rate_n_flags in a pretty formatMordechay Goodstein
Use the rs_pretty_print_rate() function to print the rate_n_flags in more human-readable format. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: adapt the code to use api ver 11Tova Mussai
FW scan api ver 11 adds support for some new features, in this version the fw did also some cleanup in the api, which causes the driver not to be able to use the current scan req struct. Therefore, in this patch the driver has new version for the scan command code Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: Create function to build scan cmdTova Mussai
Currently, the code to build scan cmd is duplicated in iwl_mvm_reg_scan_start and iwl_mvm_sched_scan_start. Create a function to build this command, and call the function instead. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: create function for scan scheduling paramsTova Mussai
In the next patch, this code will be used from different places. As preparation export this code into function. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: dbg_ini: support dump collection upon assert during D3Shahar S Matityahu
add assert time point in the D3 resume flow in case there was an assert during D3. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: pcie: make iwl_pcie_gen2_update_byte_tbl staticEmmanuel Grumbach
It is called within tx-gen2.c only. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: in VHT connection use only VHT capabilitiesMordechay Goodstein
mac80211 limits amsdu size to the minimum of HT and VHT capabilities but since in a VHT connection we don't transmit HT frames we can discard HT limits. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: nvm: update iwl_uhb_nvm_channelsTova Mussai
Change the UHB channels to start from 1 to match the specs (11ax Draft 5.0). Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: remove else-if in iwl_send_phy_cfg_cmd()Luca Coelho
We return in the if block, so it's unnecessary to have an else statement. Remove it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: fix support for single antenna diversityLuca Coelho
When the single antenna diversity support was sent upstream, only some definitions were sent, due to a bad revert. Fix this by adding the actual code. Fixes: 5952e0ec3f05 ("iwlwifi: mvm: add support for single antenna diversity") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-15 02:57:04 +0000