summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-17net: phy: mdio-mux-bcm-iproc: check clk_prepare_enable() return valueRayagonda Kokatanur
Check clk_prepare_enable() return value. Fixes: 2c7230446bc9 ("net: phy: Add pm support to Broadcom iProc mdio mux driver") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17Merge branch 'net-bcmgenet-revisit-MAC-reset'David S. Miller
Doug Berger says: ==================== net: bcmgenet: revisit MAC reset Commit 3a55402c9387 ("net: bcmgenet: use RGMII loopback for MAC reset") was intended to resolve issues with reseting the UniMAC core within the GENET block by providing better control over the clocks used by the UniMAC core. Unfortunately, it is not compatible with all of the supported system configurations so an alternative method must be applied. This commit set provides such an alternative. The first commit reverts the previous change and the second commit provides the alternative reset sequence that addresses the concerns observed with the previous implementation. This replacement implementation should be applied to the stable branches wherever commit 3a55402c9387 ("net: bcmgenet: use RGMII loopback for MAC reset") has been applied. Unfortunately, reverting that commit may conflict with some restructuring changes introduced by commit 4f8d81b77e66 ("net: bcmgenet: Refactor register access in bcmgenet_mii_config"). The first commit in this set has been manually edited to resolve the conflict on net/master. I would be happy to help stable maintainers with resolving any such conflicts if they occur. However, I do not expect that commit to have been backported to stable branch so hopefully the revert can be applied cleanly. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bcmgenet: keep MAC in reset until PHY is upDoug Berger
As noted in commit 28c2d1a7a0bf ("net: bcmgenet: enable loopback during UniMAC sw_reset") the UniMAC must be clocked at least 5 cycles while the sw_reset is asserted to ensure a clean reset. That commit enabled local loopback to provide an Rx clock from the GENET sourced Tx clk. However, when connected in MII mode the Tx clk is sourced by the PHY so if an EPHY is not supplying clocks (e.g. when the link is down) the UniMAC does not receive the necessary clocks. This commit extends the sw_reset window until the PHY reports that the link is up thereby ensuring that the clocks are being provided to the MAC to produce a clean reset. One consequence is that if the system attempts to enter a Wake on LAN suspend state when the PHY link has not been active the MAC may not have had a chance to initialize cleanly. In this case, we remove the sw_reset and enable the WoL reception path as normal with the hope that the PHY will provide the necessary clocks to drive the WoL blocks if the link becomes active after the system has entered suspend. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17Revert "net: bcmgenet: use RGMII loopback for MAC reset"Doug Berger
This reverts commit 3a55402c93877d291b0a612d25edb03d1b4b93ac. This is not a good solution when connecting to an external switch that may not support the isolation of the TXC signal resulting in output driver contention on the pin. A different solution is necessary. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17Merge branch 'net-mvmdio-avoid-error-message-for-optional-IRQ'David S. Miller
Chris Packham says: ==================== net: mvmdio: avoid error message for optional IRQ I've gone ahead an sent a revert. This is the same as the original v1 except I've added Andrew's review to the commit message. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: mvmdio: avoid error message for optional IRQChris Packham
Per the dt-binding the interrupt is optional so use platform_get_irq_optional() instead of platform_get_irq(). Since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()") platform_get_irq() produces an error message orion-mdio f1072004.mdio: IRQ index 0 not found which is perfectly normal if one hasn't specified the optional property in the device tree. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17Revert "net: mvmdio: avoid error message for optional IRQ"Chris Packham
This reverts commit e1f550dc44a4d535da4e25ada1b0eaf8f3417929. platform_get_irq_optional() will still return -ENXIO when no interrupt is provided so the additional error handling caused the driver prone to fail when no interrupt was specified. Revert the change so we can apply the correct minimal fix. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17Input: allocate keycode for "Selective Screenshot" keyRajat Jain
New Chrome OS keyboards have a "snip" key that is basically a selective screenshot (allows a user to select an area of screen to be copied). Allocate a keycode for it. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Harry Cutts <hcutts@chromium.org> Link: https://lore.kernel.org/r/20200313180333.75011-1-rajatja@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-17arm64: smp: fix crash_smp_send_stop() behaviourCristian Marussi
On a system configured to trigger a crash_kexec() reboot, when only one CPU is online and another CPU panics while starting-up, crash_smp_send_stop() will fail to send any STOP message to the other already online core, resulting in fail to freeze and registers not properly saved. Moreover even if the proper messages are sent (case CPUs > 2) it will similarly fail to account for the booting CPU when executing the final stop wait-loop, so potentially resulting in some CPU not been waited for shutdown before rebooting. A tangible effect of this behaviour can be observed when, after a panic with kexec enabled and loaded, on the following reboot triggered by kexec, the cpu that could not be successfully stopped fails to come back online: [ 362.291022] ------------[ cut here ]------------ [ 362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 362.292400] Modules linked in: [ 362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105 [ 362.293136] Hardware name: Foundation-v8A (DT) [ 362.293382] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 362.294063] pc : has_cpuid_feature+0xf0/0x348 [ 362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 362.294280] sp : ffff800011b1bf60 [ 362.294362] x29: ffff800011b1bf60 x28: 0000000000000000 [ 362.294534] x27: 0000000000000000 x26: 0000000000000000 [ 362.294631] x25: 0000000000000000 x24: ffff80001189a25c [ 362.294718] x23: 0000000000000000 x22: 0000000000000000 [ 362.294803] x21: ffff8000114aa018 x20: ffff800011156a00 [ 362.294897] x19: ffff800010c944a0 x18: 0000000000000004 [ 362.294987] x17: 0000000000000000 x16: 0000000000000000 [ 362.295073] x15: 00004e53b831ae3c x14: 00004e53b831ae3c [ 362.295165] x13: 0000000000000384 x12: 0000000000000000 [ 362.295251] x11: 0000000000000000 x10: 00400032b5503510 [ 362.295334] x9 : 0000000000000000 x8 : ffff800010c7e204 [ 362.295426] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 362.295508] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 362.295592] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 362.295683] x1 : 0000000000180420 x0 : 0000000000180480 [ 362.296011] Call trace: [ 362.296257] has_cpuid_feature+0xf0/0x348 [ 362.296350] verify_local_elf_hwcaps+0x84/0xe8 [ 362.296424] check_local_cpu_capabilities+0x44/0x128 [ 362.296497] secondary_start_kernel+0xf4/0x188 [ 362.296998] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 362.298652] SMP: stopping secondary CPUs [ 362.300615] Starting crashdump kernel... [ 362.301168] Bye! [ 0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0] [ 0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020 [ 0.000000] Machine model: Foundation-v8A [ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled ..... [ 0.138024] rcu: Hierarchical SRCU implementation. [ 0.153472] its@2f020000: unable to locate ITS domain [ 0.154078] its@2f020000: Unable to locate ITS domain [ 0.157541] EFI services will not be available. [ 0.175395] smp: Bringing up secondary CPUs ... [ 0.209182] psci: failed to boot CPU1 (-22) [ 0.209377] CPU1: failed to boot: -22 [ 0.274598] Detected PIPT I-cache on CPU2 [ 0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000 [ 0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0] [ 0.369053] Detected PIPT I-cache on CPU3 [ 0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000 [ 0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0] [ 0.401707] smp: Brought up 1 node, 3 CPUs [ 0.404057] SMP: Total of 3 processors activated. Make crash_smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way the right number of STOPs is sent and all other stopped-cores's registers are properly saved. Fixes: 78fd584cdec05 ("arm64: kdump: implement machine_crash_shutdown()") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17arm64: smp: fix smp_send_stop() behaviourCristian Marussi
On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c16a16c ("arm64: SMP support") Reported-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17arm64: perf: Add support for ARMv8.5-PMU 64-bit countersAndrew Murray
At present ARMv8 event counters are limited to 32-bits, though by using the CHAIN event it's possible to combine adjacent counters to achieve 64-bits. The perf config1:0 bit can be set to use such a configuration. With the introduction of ARMv8.5-PMU support, all event counters can now be used as 64-bit counters. Let's enable 64-bit event counters where support exists. Unless the user sets config1:0 we will adjust the counter value such that it overflows upon 32-bit overflow. This follows the same behaviour as the cycle counter which has always been (and remains) 64-bits. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> [Mark: fix ID field names, compare with 8.5 value] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17KVM: arm64: limit PMU version to PMUv3 for ARMv8.1Andrew Murray
We currently expose the PMU version of the host to the guest via emulation of the DFR0_EL1 and AA64DFR0_EL1 debug feature registers. However many of the features offered beyond PMUv3 for 8.1 are not supported in KVM. Examples of this include support for the PMMIR registers (added in PMUv3 for ARMv8.4) and 64-bit event counters added in (PMUv3 for ARMv8.5). Let's trap the Debug Feature Registers in order to limit PMUVer/PerfMon in the Debug Feature Registers to PMUv3 for ARMv8.1 to avoid unexpected behaviour. Both ID_AA64DFR0.PMUVer and ID_DFR0.PerfMon follow the "Alternative ID scheme used for the Performance Monitors Extension version" where 0xF means an IMPLEMENTATION DEFINED PMU is implemented, and values 0x0-0xE are treated as with an unsigned field (with 0x0 meaning no PMU is present). As we don't expect to expose an IMPLEMENTATION DEFINED PMU, and our cap is below 0xF, we can treat these fields as unsigned when applying the cap. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> [Mark: make field names consistent, use perfmon cap] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17arm64: cpufeature: Extract capped perfmon fieldsAndrew Murray
When emulating ID registers there is often a need to cap the version bits of a feature such that the guest will not use features that the host is not aware of. For example, when KVM mediates access to the PMU by emulating register accesses. Let's add a helper that extracts a performance monitors ID field and caps the version to a given value. Fields that identify the version of the Performance Monitors Extension do not follow the standard ID scheme, and instead follow the scheme described in ARM DDI 0487E.a page D13-2825 "Alternative ID scheme used for the Performance Monitors Extension version". The value 0xF means an IMPLEMENTATION DEFINED PMU is present, and values 0x0-OxE can be treated the same as an unsigned field with 0x0 meaning no PMU is present. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> [Mark: rework to handle perfmon fields] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17arm64: perf: Clean up enable/disable callsRobin Murphy
Reading this code bordered on painful, what with all the repetition and pointless return values. More fundamentally, dribbling the hardware enables and disables in one bit at a time incurs needless system register overhead for chained events and on reset. We already use bitmask values for the KVM hooks, so consolidate all the register accesses to match, and make a reasonable saving in both source and object code. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17perf: arm-ccn: Use scnprintf() for robustnessTakashi Iwai
snprintf() is a hard-to-use function, it's especially difficult to use it for concatenating substrings in a buffer with a limited size. Since snprintf() returns the would-be-output size, not the actual size, the subsequent use of snprintf() may point to the incorrect position easily. Although the current code doesn't actually overflow the buffer, it's an incorrect usage. This patch replaces such snprintf() calls with a safer version, scnprintf(). Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17Merge branch 'md-next' of ↵Jens Axboe
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.7/drivers Pull MD fixes from Song. * 'md-next' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/song/md: block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices md: check arrays is suspended in mddev_detach before call quiesce operations
2020-03-17perf expr: Fix copy/paste mistakeJiri Olsa
Copy/paste leftover from recent refactor. Fixes: 26226a97724d ("perf expr: Move expr lexer to flex") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200315155609.603948-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-17perf report: Fix no branch type statistics report issueJin Yao
Previously we could get the report of branch type statistics. For example: # perf record -j any,save_type ... # t perf report --stdio # # Branch Statistics: # COND_FWD: 40.6% COND_BWD: 4.1% CROSS_4K: 24.7% CROSS_2M: 12.3% COND: 44.7% UNCOND: 0.0% IND: 6.1% CALL: 24.5% RET: 24.7% But now for the recent perf, it can't report the branch type statistics. It's a regression issue caused by commit 40c39e304641 ("perf report: Fix a no annotate browser displayed issue"), which only counts the branch type statistics for browser mode. This patch moves the branch_type_count() outside of ui__has_annotation() checking, then branch type statistics can work for stdio mode. Fixes: 40c39e304641 ("perf report: Fix a no annotate browser displayed issue") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200313134607.12873-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-17perf tools: Give synthetic mmap events an inode generationIan Rogers
When mmap2 events are synthesized the ino_generation field isn't being set leading to uninitialized memory being compared. Caught with clang's -fsanitize=memory: ==124733==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55a96a6a65cc in __dso_id__cmp tools/perf/util/dsos.c:23:6 #1 0x55a96a6a81d5 in dso_id__cmp tools/perf/util/dsos.c:38:9 #2 0x55a96a6a717f in __dso__cmp_long_name tools/perf/util/dsos.c:74:15 #3 0x55a96a6a6c4c in __dsos__findnew_link_by_longname_id tools/perf/util/dsos.c:106:12 #4 0x55a96a6a851e in __dsos__findnew_by_longname_id tools/perf/util/dsos.c:178:9 #5 0x55a96a6a7798 in __dsos__find_id tools/perf/util/dsos.c:191:9 #6 0x55a96a6a7b57 in __dsos__findnew_id tools/perf/util/dsos.c:251:20 #7 0x55a96a6a7a57 in dsos__findnew_id tools/perf/util/dsos.c:259:17 #8 0x55a96a7776ae in machine__findnew_dso_id tools/perf/util/machine.c:2709:9 #9 0x55a96a77dfcf in map__new tools/perf/util/map.c:193:10 #10 0x55a96a77240a in machine__process_mmap2_event tools/perf/util/machine.c:1670:8 #11 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9 #12 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9 #13 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9 #14 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7 #15 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9 #16 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3 #17 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9 #18 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9 #19 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8 #20 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2 #21 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9 #22 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9 #23 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4 #24 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9 #25 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11 #26 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8 #27 0x55a96a284097 in run_argv tools/perf/perf.c:408:2 #28 0x55a96a282223 in main tools/perf/perf.c:538:3 Uninitialized value was stored to memory at #1 0x55a96a6a18f7 in dso__new_id tools/perf/util/dso.c:1230:14 #2 0x55a96a6a78ee in __dsos__addnew_id tools/perf/util/dsos.c:233:20 #3 0x55a96a6a7bcc in __dsos__findnew_id tools/perf/util/dsos.c:252:21 #4 0x55a96a6a7a57 in dsos__findnew_id tools/perf/util/dsos.c:259:17 #5 0x55a96a7776ae in machine__findnew_dso_id tools/perf/util/machine.c:2709:9 #6 0x55a96a77dfcf in map__new tools/perf/util/map.c:193:10 #7 0x55a96a77240a in machine__process_mmap2_event tools/perf/util/machine.c:1670:8 #8 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9 #9 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9 #10 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9 #11 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7 #12 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9 #13 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3 #14 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9 #15 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9 #16 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8 #17 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2 #18 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9 #19 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9 Uninitialized value was stored to memory at #0 0x55a96a7725af in machine__process_mmap2_event tools/perf/util/machine.c:1646:25 #1 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9 #2 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9 #3 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9 #4 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7 #5 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9 #6 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3 #7 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9 #8 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9 #9 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8 #10 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2 #11 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9 #12 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9 #13 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4 #14 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9 #15 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11 #16 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8 #17 0x55a96a284097 in run_argv tools/perf/perf.c:408:2 #18 0x55a96a282223 in main tools/perf/perf.c:538:3 Uninitialized value was created by a heap allocation #0 0x55a96a22f60d in malloc llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:925:3 #1 0x55a96a882948 in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:655:15 #2 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9 #3 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9 #4 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8 #5 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2 #6 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9 #7 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9 #8 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4 #9 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9 #10 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11 #11 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8 #12 0x55a96a284097 in run_argv tools/perf/perf.c:408:2 #13 0x55a96a282223 in main tools/perf/perf.c:538:3 SUMMARY: MemorySanitizer: use-of-uninitialized-value tools/perf/util/dsos.c:23:6 in __dso_id__cmp Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20200313053129.131264-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-17bpf: Sanitize the bpf_struct_ops tcp-cc nameMartin KaFai Lau
The bpf_struct_ops tcp-cc name should be sanitized in order to avoid problematic chars (e.g. whitespaces). This patch reuses the bpf_obj_name_cpy() for accepting the same set of characters in order to keep a consistent bpf programming experience. A "size" param is added. Also, the strlen is returned on success so that the caller (like the bpf_tcp_ca here) can error out on empty name. The existing callers of the bpf_obj_name_cpy() only need to change the testing statement to "if (err < 0)". For all these existing callers, the err will be overwritten later, so no extra change is needed for the new strlen return value. v3: - reverse xmas tree style v2: - Save the orig_src to avoid "end - size" (Andrii) Fixes: 0baf26b0fcd7 ("bpf: tcp: Support tcp_congestion_ops in bpf") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200314010209.1131542-1-kafai@fb.com
2020-03-17USB: cdc-acm: fix rounding error in TIOCSSERIALAnthony Mallet
By default, tty_port_init() initializes those parameters to a multiple of HZ. For instance in line 69 of tty_port.c: port->close_delay = (50 * HZ) / 100; https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69 With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04 linux-image-4.15.0-37-generic), the default setting for close_delay is thus 125. When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then executed with the same setting '12', the value is interpreted as '120' which is different from the current setting and a EPERM error may be raised by set_serial_info() if !CAP_SYS_ADMIN. https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919 Fixes: ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIALAnthony Mallet
close_delay and closing_wait are specified in hundredth of a second but stored internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies() functions to convert from each other. Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-1-anthony.mallet@laas.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adaptersHans de Goede
We have been receiving bug reports that ethernet connections over RTL8153 based ethernet adapters stops working after a while with errors like these showing up in dmesg when the ethernet stops working: [12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout [12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout [12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1 docks and with generic USB to ethernet dongles using the RTL8153 chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to the kernel commandline and all users who have tried this report that this fixes this. Also note that we already have an existing NO_LPM quirk for the RTL8153 used in the Microsoft Surface Dock (where it uses a different usb-id). This commit adds a NO_LPM quirk for the generic Realtek RTL8153 0bda:8153 usb-id, fixing the Tx timeout errors on these devices. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931 Cc: stable@vger.kernel.org Cc: russianneuromancer@ya.ru Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200313120708.100339-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: chipidea: udc: fix sleeping function called from invalid contextPeter Chen
The code calls pm_runtime_get_sync with irq disabled, it causes below warning: BUG: sleeping function called from invalid context at wer/runtime.c:1075 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: er/u8:1 CPU: 1 PID: 37 Comm: kworker/u8:1 Not tainted 20200304-00181-gbebfd2a5be98 #1588 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: ci_otg ci_otg_work [<c010e8bd>] (unwind_backtrace) from [<c010a315>] 1/0x14) [<c010a315>] (show_stack) from [<c0987d29>] 5/0x94) [<c0987d29>] (dump_stack) from [<c013e77f>] +0xeb/0x118) [<c013e77f>] (___might_sleep) from [<c052fa1d>] esume+0x75/0x78) [<c052fa1d>] (__pm_runtime_resume) from [<c0627a33>] 0x23/0x74) [<c0627a33>] (ci_udc_pullup) from [<c062fb93>] nect+0x2b/0xcc) [<c062fb93>] (usb_gadget_connect) from [<c062769d>] _connect+0x59/0x104) [<c062769d>] (ci_hdrc_gadget_connect) from [<c062778b>] ssion+0x43/0x48) [<c062778b>] (ci_udc_vbus_session) from [<c062f997>] s_connect+0x17/0x9c) [<c062f997>] (usb_gadget_vbus_connect) from [<c062634d>] bd/0x128) [<c062634d>] (ci_otg_work) from [<c0134719>] rk+0x149/0x404) [<c0134719>] (process_one_work) from [<c0134acb>] 0xf7/0x3bc) [<c0134acb>] (worker_thread) from [<c0139433>] x118) [<c0139433>] (kthread) from [<c01010bd>] (ret_from_fork+0x11/0x34) Tested-by: Dmitry Osipenko <digetx@gmail.com> Cc: <stable@vger.kernel.org> #v5.5 Fixes: 72dc8df7920f ("usb: chipidea: udc: protect usb interrupt enable") Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200316031034.17847-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17USB: c67x00: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to Cypress C67X00 USB Controller. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Link: https://lore.kernel.org/r/20200315104022.GA3998@nishad Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17USB: atm: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header file related to USB DSL modem support drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Link: https://lore.kernel.org/r/20200315102844.GA3460@nishad Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: tusb6010: fix a possible missing data type replacementMacpaul Lin
Replace "unsigned" to "u32" for checkpatch fix to tusb_writeb(). Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-9-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: fix crash with highmen PIO and usbmonMans Rullgard
When handling a PIO bulk transfer with highmem buffer, a temporary mapping is assigned to urb->transfer_buffer. After the transfer is complete, an invalid address is left behind in this pointer. This is not ordinarily a problem since nothing touches that buffer before the urb is released. However, when usbmon is active, usbmon_urb_complete() calls (indirectly) mon_bin_get_data() which does access the transfer buffer if it is set. To prevent an invalid memory access here, reset urb->transfer_buffer to NULL when finished (musb_host_rx()), or do not set it at all (musb_host_tx()). Fixes: 8e8a55165469 ("usb: musb: host: Handle highmem in PIO mode") Signed-off-by: Mans Rullgard <mans@mansr.com> Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-8-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: jz4740: Add support for the JZ4770Paul Cercueil
Add support for probing the jz4740-musb driver on the JZ4770 SoC. The USB IP in the JZ4770 works the same Inventra IP as for the JZ4740, but it features more endpoints, and officially supports OTG. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-7-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: jz4740: Unconditionally depend on devicetreePaul Cercueil
The jz4740-musb driver is unconditionally probed from devicetree, so we can add a hard dependency on devicetree. This makes the code a bit cleaner, and is more future-proof as the platform data is now retrieved using of_device_get_match_data(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-6-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: jz4740: Register USB role switchPaul Cercueil
Register a USB role switch, in order to get notified by the connector driver when the USB role changes. The notification is then transmitted to the PHY. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-5-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: jz4740: Add support for DMAPaul Cercueil
Add support for using the DMA channels built into the Inventra IP. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-4-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17dt-bindings: usb: Convert jz4740-musb doc to YAMLPaul Cercueil
Convert ingenic,jz4740-musb.txt to ingenic,musb.yaml, and add the new ingenic,jz4770-musb and ingenic,jz4725b-musb compatible strings in the process. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-3-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: remove redundant assignment to variable retColin Ian King
Variable ret is being initialized with a value that is never read, it is assigned a new value later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-2-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17Merge tag 'usb-ci-v5.7-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: - Improve the runtime pm - Cover one cover case during suspend/resume - Some SPDX License changes The code changes are at my ci-for-usb-next many days, no issue is reported. * tag 'usb-ci-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: USB: chipidea: Use the correct style for SPDX License Identifier usb: chipidea: otg: handling vbus disconnect event occurred during system suspend usb: chipidea: udc: using structure ci_hdrc device for runtime PM
2020-03-17Merge tag 'thunderbolt-for-v5.7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.7 merge window - A couple of commits that make the driver to use flexible-array member instead of zero-length array extension. This allows compiler to issue a warning if the flexible array is not the last member of a structure. - Use scnprintf() instead of snprintf() to avoid potential buffer overflow. * tag 'thunderbolt-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Use scnprintf() for avoiding potential buffer overflow thunderbolt: icm: Replace zero-length array with flexible-array member thunderbolt: eeprom: Replace zero-length array with flexible-array member
2020-03-17arm64: define __alloc_zeroed_user_highpageglider@google.com
When running the kernel with init_on_alloc=1, calling the default implementation of __alloc_zeroed_user_highpage() from include/linux/highmem.h leads to double-initialization of the allocated page (first by the page allocator, then by clear_user_page(). Calling alloc_page_vma() with __GFP_ZERO, similarly to e.g. x86, seems to be enough to ensure the user page is zeroed only once. Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-17arm64/kernel: Simplify __cpu_up() by bailing out earlyGavin Shan
The function __cpu_up() is invoked to bring up the target CPU through the backend, PSCI for example. The nested if statements won't be needed if we bail out early on the following two conditions where the status won't be checked. The code looks simplified in that case. * Error returned from the backend (e.g. PSCI) * The target CPU has been marked as onlined Signed-off-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com>
2020-03-17CIFS: fiemap: do not return EINVAL if get nothingMurphy Zhou
If we call fiemap on a truncated file with none blocks allocated, it makes sense we get nothing from this call. No output means no blocks have been counted, but the call succeeded. It's a valid response. Simple example reproducer: xfs_io -f 'truncate 2M' -c 'fiemap -v' /cifssch/testfile xfs_io: ioctl(FS_IOC_FIEMAP) ["/cifssch/testfile"]: Invalid argument Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org>
2020-03-17CIFS: Increment num_remote_opens stats counter even in case of ↵Shyam Prasad N
smb2_query_dir_first The num_remote_opens counter keeps track of the number of open files which must be maintained by the server at any point. This is a per-tree-connect counter, and the value of this counter gets displayed in the /proc/fs/cifs/Stats output as a following... Open files: 0 total (local), 1 open on server ^^^^^^^^^^^^^^^^ As a thumb-rule, we want to increment this counter for each open/create that we successfully execute on the server. Similarly, we should decrement the counter when we successfully execute a close. In this case, an increment was being missed in case of smb2_query_dir_first, in case of successful open. As a result, we would underflow the counter and we could even see the counter go to negative after sufficient smb2_query_dir_first calls. I tested the stats counter for a bunch of filesystem operations with the fix. And it looks like the counter looks correct to me. I also check if we missed the increments and decrements elsewhere. It does not seem so. Few other cases where an open is done and we don't increment the counter are the compound calls where the corresponding close is also sent in the request. Signed-off-by: Shyam Prasad N <nspmangalore@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2020-03-17cifs: potential unintitliazed error code in cifs_getattr()Dan Carpenter
Smatch complains that "rc" could be uninitialized. fs/cifs/inode.c:2206 cifs_getattr() error: uninitialized symbol 'rc'. Changing it to "return 0;" improves readability as well. Fixes: cc1baf98c8f6 ("cifs: do not ignore the SYNC flags in getattr") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
2020-03-17EDAC/armada_xp: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Jan Luebbe <jlu@pengutronix.de> Link: https://lkml.kernel.org/r/20200311071728.4541-1-tiwai@suse.de
2020-03-17arm64: remove redundant blank for '=' operator韩科才
remove redundant blank for '=' operator, it may be more elegant. Signed-off-by: hankecai <hankecai@vivo.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-17arm64: kexec_file: Fixed code style.Li Tao
Remove unnecessary blank. Signed-off-by: Li Tao <tao.li@vivo.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-17arm64: add blank after 'if'Zheng Wei
add blank after 'if' for armv8_deprecated_init() to make it comply with kernel coding style. Signed-off-by: Zheng Wei <wei.zheng@vivo.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-17arm64: fix spelling mistake "ca not" -> "cannot"韩科才
There is a spelling mistake in the comment, Fix it. Signed-off-by: hankecai <hankecai@bbktel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-17x86/mm: Remove the now redundant N_MEMORY checkBaoquan He
In commit f70029bbaacb ("mm, memory_hotplug: drop CONFIG_MOVABLE_NODE") the dependency on CONFIG_MOVABLE_NODE was removed for N_MEMORY. Before, CONFIG_HIGHMEM && !CONFIG_MOVABLE_NODE could make (N_MEMORY == N_NORMAL_MEMORY) be true. After that commit, N_MEMORY cannot be equal to N_NORMAL_MEMORY. So the conditional check in paging_init() is not needed anymore, remove it. [ bp: Massage. ] Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Link: https://lkml.kernel.org/r/20200311011823.27740-1-bhe@redhat.com
2020-03-17block: keep bdi->io_pages in sync with max_sectors_kb for stacked devicesKonstantin Khlebnikov
Field bdi->io_pages added in commit 9491ae4aade6 ("mm: don't cap request size based on read-ahead setting") removes unneeded split of read requests. Stacked drivers do not call blk_queue_max_hw_sectors(). Instead they set limits of their devices by blk_set_stacking_limits() + disk_stack_limits(). Field bio->io_pages stays zero until user set max_sectors_kb via sysfs. This patch updates io_pages after merging limits in disk_stack_limits(). Commit c6d6e9b0f6b4 ("dm: do not allow readahead to limit IO size") fixed the same problem for device-mapper devices, this one fixes MD RAIDs. Fixes: 9491ae4aade6 ("mm: don't cap request size based on read-ahead setting") Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-03-17md: check arrays is suspended in mddev_detach before call quiesce operationsGuoqing Jiang
Don't call quiesce(1) and quiesce(0) if array is already suspended, otherwise in level_store, the array is writable after mddev_detach in below part though the intention is to make array writable after resume. mddev_suspend(mddev); mddev_detach(mddev); ... mddev_resume(mddev); And it also causes calltrace as follows in [1]. [48005.653834] WARNING: CPU: 1 PID: 45380 at kernel/kthread.c:510 kthread_park+0x77/0x90 [...] [48005.653976] CPU: 1 PID: 45380 Comm: mdadm Tainted: G OE 5.4.10-arch1-1 #1 [48005.653979] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4105-ITX, BIOS P1.40 08/06/2018 [48005.653984] RIP: 0010:kthread_park+0x77/0x90 [48005.654015] Call Trace: [48005.654039] r5l_quiesce+0x3c/0x70 [raid456] [48005.654052] raid5_quiesce+0x228/0x2e0 [raid456] [48005.654073] mddev_detach+0x30/0x70 [md_mod] [48005.654090] level_store+0x202/0x670 [md_mod] [48005.654099] ? security_capable+0x40/0x60 [48005.654114] md_attr_store+0x7b/0xc0 [md_mod] [48005.654123] kernfs_fop_write+0xce/0x1b0 [48005.654132] vfs_write+0xb6/0x1a0 [48005.654138] ksys_write+0x67/0xe0 [48005.654146] do_syscall_64+0x4e/0x140 [48005.654155] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [48005.654161] RIP: 0033:0x7fa0c8737497 [1]: https://bugzilla.kernel.org/show_bug.cgi?id=206161 Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-03-17rtc: cmos: remove useless cast for driver_nameCorentin Labbe
Now the pnp_driver name is "const char *", there are no need to cast driver_name. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-30 11:45:42 +0000