| Age | Commit message (Collapse) | Author |
|---|
|
mt76x02_mcu_msg_send is run just by mmio code so get rid of
mt76_is_mmio() check
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce remain_on_channel support to mt7615 driver if the device is
running offload firmware
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
vmx_load_mmu_pgd is delaying the write of GUEST_CR3 to prepare_vmcs02 as
an optimization, but this is only correct before the nested vmentry.
If userspace is modifying CR3 with KVM_SET_SREGS after the VM has
already been put in guest mode, the value of CR3 will not be updated.
Remove the optimization, which almost never triggers anyway.
Fixes: 04f11ef45810 ("KVM: nVMX: Always write vmcs02.GUEST_CR3 during nested VM-Enter")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
svm_load_mmu_pgd is delaying the write of GUEST_CR3 to prepare_vmcs02 as
an optimization, but this is only correct before the nested vmentry.
If userspace is modifying CR3 with KVM_SET_SREGS after the VM has
already been put in guest mode, the value of CR3 will not be updated.
Remove the optimization, which almost never triggers anyway.
This was was added in commit 689f3bf21628 ("KVM: x86: unify callbacks
to load paging root", 2020-03-16) just to keep the two vendor-specific
modules closer, but we'll fix VMX too.
Fixes: 689f3bf21628 ("KVM: x86: unify callbacks to load paging root")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The usual drill at this point, except there is no code to remove because this
case was not handled at all.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All events now inject vmexits before vmentry rather than after vmexit. Therefore,
exit_required is not set anymore and we can remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This allows exceptions injected by the emulator to be properly delivered
as vmexits. The code also becomes simpler, because we can just let all
L0-intercepted exceptions go through the usual path. In particular, our
emulation of the VMX #DB exit qualification is very much simplified,
because the vmexit injection path can use kvm_deliver_exception_payload
to update DR6.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In case an interrupt arrives after nested.check_events but before the
call to kvm_cpu_has_injectable_intr, we could end up enabling the interrupt
window even if the interrupt is actually going to be a vmexit. This is
useless rather than harmful, but it really complicates reasoning about
SVM's handling of the VINTR intercept. We'd like to never bother with
the VINTR intercept if V_INTR_MASKING=1 && INTERCEPT_INTR=1, because in
that case there is no interrupt window and we can just exit the nested
guest whenever we want.
This patch moves the opening of the interrupt window inside
inject_pending_event. This consolidates the check for pending
interrupt/NMI/SMI in one place, and makes KVM's usage of immediate
exits more consistent, extending it beyond just nested virtualization.
There are two functional changes here. They only affect corner cases,
but overall they simplify the inject_pending_event.
- re-injection of still-pending events will also use req_immediate_exit
instead of using interrupt-window intercepts. This should have no impact
on performance on Intel since it simply replaces an interrupt-window
or NMI-window exit for a preemption-timer exit. On AMD, which has no
equivalent of the preemption time, it may incur some overhead but an
actual effect on performance should only be visible in pathological cases.
- kvm_arch_interrupt_allowed and kvm_vcpu_has_events will return true
if an interrupt, NMI or SMI is blocked by nested_run_pending. This
makes sense because entering the VM will allow it to make progress
and deliver the event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The commit 0ebeea8ca8a4d1d453a ("bpf: Restrict bpf_probe_read{, str}() only
to archs where they work") caused that bpf_probe_read{, str}() functions
were not longer available on architectures where the same logical address
might have different content in kernel and user memory mapping. These
architectures should use probe_read_{user,kernel}_str helpers.
For backward compatibility, the problematic functions are still available
on architectures where the user and kernel address spaces are not
overlapping. This is defined CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
At the moment, these backward compatible functions are enabled only on x86_64,
arm, and arm64. Let's do it also on powerpc that has the non overlapping
address space as well.
Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/20200527122844.19524-1-pmladek@suse.com
|
|
Baikal-T1 SoC provides an embedded process, voltage and temperature
sensor to monitor an internal SoC environment (chip temperature, supply
voltage and process monitor) and on time detect critical situations,
which may cause the system instability and even damages. The IP-block
is based on the Analog Bits PVT sensor, but is equipped with a
dedicated control wrapper, which provides a MMIO registers-based access
to the sensor core functionality (APB3-bus based) and exposes an
additional functions like thresholds/data ready interrupts, its status
and masks, measurements timeout. All of these is used to create a hwmon
driver being added to the kernel by this commit.
The driver implements support for the hardware monitoring capabilities
of Baikal-T1 process, voltage and temperature sensors. PVT IP-core
consists of one temperature and four voltage sensors, each of which is
implemented as a dedicated hwmon channel config.
The driver can optionally provide the hwmon alarms for each sensor the
PVT controller supports. The alarms functionality is made compile-time
configurable due to the hardware interface implementation peculiarity,
which is connected with an ability to convert data from only one sensor
at a time. Additional limitation is that the controller performs the
thresholds checking synchronously with the data conversion procedure.
Due to these limitations in order to have the hwmon alarms
automatically detected the driver code must switch from one sensor to
another, read converted data and manually check the threshold status
bits. Depending on the measurements timeout settings this design may
cause additional burden on the system performance. By default if the
alarms kernel config is disabled the data conversion is performed by
the driver on demand when read operation is requested via corresponding
_input-file.
Co-developed-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
For hwmon drivers using the hwmon_device_register_with_info() API, it
is desirable to have a generic notification mechanism available. This
mechanism can be used to notify userspace as well as the thermal
subsystem if the driver experiences any events, such as warning or
critical alarms.
Implement hwmon_notify_event() to provide this mechanism. The function
generates a sysfs event and a udev event. If the device is registered
with the thermal subsystem and the event is associated with a temperature
sensor, also notify the thermal subsystem that a thermal event occurred.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Baikal-T1 SoC is equipped with an embedded process, voltage and
temperature sensor to monitor the chip internal environment like
temperature, supply voltage and transistors performance.
This bindings describes the external Baikal-T1 PVT control interfaces
like MMIO registers space, interrupt request number and clocks source.
These are then used by the corresponding hwmon device driver to
implement the sysfs files-based access to the sensors functionality.
Co-developed-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Pull NVMe poll fix from Christoph.
* 'nvme-5.7' of git://git.infradead.org/nvme:
nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()
|
|
disk_start_io_acct and disk_end_io_acct need at least a struct gendisk
forward declaration, but for weird historic reasons much of blkdev.h
is stubbed out for CONFIG_BLOCK=n. Fix this by stubbing more out for
now, but eventually this header will need a massive cleanup.
Fixes: 956d510ee78 ("block: add disk/bio-based accounting helpers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Stop the message displaying when user space is not being traced.
Example:
Prerequisites:
sudo setcap "cap_sys_rawio,cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_ipc_lock=ep" ~/bin/perf
sudo chmod +r /proc/kcore
Before:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
Warning:
Intel Processor Trace decoding will not be possible except for kernel tracing!
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.838 MB perf.data ]
After:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.068 MB perf.data ]
$ sudo chmod go-r /proc/kcore
$ sudo setcap -r ~/bin/perf
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lore.kernel.org/lkml/20200528120859.21604-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Context switch events are added automatically by Intel PT and Coresight.
Make it possible to suppress them. That is useful for tracing the
scheduler without the disturbance that the switch event processing
creates.
Example:
Prerequisites:
$ which perf
~/bin/perf
$ sudo setcap "cap_sys_rawio,cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_ipc_lock=ep" ~/bin/perf
$ sudo chmod +r /proc/kcore
Before:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.938 MB perf.data ]
$ perf script -D | grep PERF_RECORD_SWITCH | wc -l
572
After:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
Warning:
Intel Processor Trace decoding will not be possible except for kernel tracing!
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.838 MB perf.data ]
$ perf script -D | grep PERF_RECORD_SWITCH | wc -l
0
$ sudo chmod go-r /proc/kcore
$ sudo setcap -r ~/bin/perf
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lore.kernel.org/lkml/20200528120859.21604-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make process_attr() respect -F-ip, noting also that the condition in
process_attr() (callchain_param.record_mode != CALLCHAIN_NONE) is always
true so test the sample type directly.
Example:
Before:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.033 MB perf.data ]
$ perf script --call-trace | head -5
uname 30992 [006] 41758.313696574: cbr: 42 freq: 4219 MHz (156%) 0 [unknown] ([unknown] )
uname 30992 [006] 41758.313696907: _start 7f71792c4100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so )
uname 30992 [006] 41758.313699574: _dl_start 7f71792c4103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so )
uname 30992 [006] 41758.313699907: _dl_start 7f71792c4e18 _dl_start+0x28 (/usr/lib/x86_64-linux-gnu/ld-2.31.so )
uname 30992 [006] 41758.313701574: _dl_start 7f71792c5128 _dl_start+0x338 (/usr/lib/x86_64-linux-gnu/ld-2.31.so )
After:
$ perf script --call-trace | head -5
uname 30992 [006] 41758.313696574: cbr: 42 freq: 4219 MHz (156%)
uname 30992 [006] 41758.313696907: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _start
uname 30992 [006] 41758.313699574: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
uname 30992 [006] 41758.313699907: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
uname 30992 [006] 41758.313701574: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
Fixes: f288e8e1aa4f ("perf script: Enable IP fields for callchains")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200527180250.16723-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
irq_data_get_irq_chip() can return NULL, however it is expected that this
never happens. If a buggy driver leads to NULL being returned from
irq_data_get_irq_chip(), warn about it instead of crashing the machine.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-arm-kernel@lists.infradead.org
|
|
Events marked as 'immediate' are started before other events to ensure
that there is context at the start of the main tracing events. The same
is true at the end of tracing, so disable 'immediate' events after other
events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200512121922.8997-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the absence of any modules, no "modules" map is created, but there
are other executable pages to map, due to eBPF JIT, kprobe or ftrace.
Map them by recognizing that the first "module" symbol is not
necessarily from a module, and adjust the map accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200512121922.8997-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For a Java method signature like:
Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V
The demangler produces:
void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int)
The arguments should be (java.lang.String, int, int) but the demangler
interprets the "S" in String as the type code for "short". Correct this
and two other minor things:
- There is no "bool" type in Java, should be "boolean".
- The demangler prepends "class" to every Java class name. This is not
standard Java syntax and it wastes a lot of horizontal space if the
signature is long. Remove this as there isn't any ambiguity between
class names and primitives.
Committer notes:
This was split from a larger patch that also added a java demangler
'perf test' entry, that, before this patch shows the error being fixed
by it:
$ perf test java
65: Demangle Java : FAILED!
$ perf test -v java
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
65: Demangle Java :
--- start ---
test child forked, pid 307264
FAILED: Ljava/lang/StringLatin1;equals([B[B)Z: bool class java.lang.StringLatin1.equals(byte[], byte[]) != boolean java.lang.StringLatin1.equals(byte[], byte[])
FAILED: Ljava/util/zip/ZipUtils;CENSIZ([BI)J: long class java.util.zip.ZipUtils.CENSIZ(byte[], int) != long java.util.zip.ZipUtils.CENSIZ(byte[], int)
FAILED: Ljava/util/regex/Pattern$BmpCharProperty;match(Ljava/util/regex/Matcher;ILjava/lang/CharSequence;)Z: bool class java.util.regex.Pattern$BmpCharProperty.match(class java.util.regex.Matcher., int, class java.lang., charhar, shortequence) != boolean java.util.regex.Pattern$BmpCharProperty.match(java.util.regex.Matcher, int, java.lang.CharSequence)
FAILED: Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V: void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int) != void java.lang.AbstractStringBuilder.appendChars(java.lang.String, int, int)
FAILED: Ljava/lang/Object;<init>()V: void class java.lang.Object<init>() != void java.lang.Object<init>()
test child finished with -1
---- end ----
Demangle Java: FAILED!
$
After applying this patch:
$ perf test java
65: Demangle Java : Ok
$
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-4-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Split from a larger patch that was also fixing a problem with the java
demangler, so, before applying that patch we see:
$ perf test java
65: Demangle Java : FAILED!
$ perf test -v java
65: Demangle Java :
--- start ---
test child forked, pid 307264
FAILED: Ljava/lang/StringLatin1;equals([B[B)Z: bool class java.lang.StringLatin1.equals(byte[], byte[]) != boolean java.lang.StringLatin1.equals(byte[], byte[])
FAILED: Ljava/util/zip/ZipUtils;CENSIZ([BI)J: long class java.util.zip.ZipUtils.CENSIZ(byte[], int) != long java.util.zip.ZipUtils.CENSIZ(byte[], int)
FAILED: Ljava/util/regex/Pattern$BmpCharProperty;match(Ljava/util/regex/Matcher;ILjava/lang/CharSequence;)Z: bool class java.util.regex.Pattern$BmpCharProperty.match(class java.util.regex.Matcher., int, class java.lang., charhar, shortequence) != boolean java.util.regex.Pattern$BmpCharProperty.match(java.util.regex.Matcher, int, java.lang.CharSequence)
FAILED: Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V: void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int) != void java.lang.AbstractStringBuilder.appendChars(java.lang.String, int, int)
FAILED: Ljava/lang/Object;<init>()V: void class java.lang.Object<init>() != void java.lang.Object<init>()
test child finished with -1
---- end ----
Demangle Java: FAILED!
$
Next patch should fix this.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-4-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If the Java sources are compiled with -g:none to disable debug
information the perf JVMTI plugin reports a lot of errors like:
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
Instead if GetLineNumberTable returns JVMTI_ERROR_ABSENT_INFORMATION
simply skip emitting line number information for that method. Unlike the
previous patch these errors don't affect the jitdump generation, they
just generate a lot of noise.
Similarly for native methods which also don't have line tables.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-3-nick.gasson@arm.com
[ Moved || operator to the end of the line, not at the start of 2nd if condition ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If a Java class is compiled with -g:none to omit debug information, the
JVMTI plugin won't write jitdump entries for any method in this class
and prints a lot of errors like:
java: GetSourceFileName failed with JVMTI_ERROR_ABSENT_INFORMATION
The call to GetSourceFileName is used to derive the file name `fn`, but
this value is not actually used since commit ca58d7e64bdf ("perf jvmti:
Generate correct debug information for inlined code") which moved the
file name lookup into fill_source_filenames(). So the call to
GetSourceFileName and related code can be safely removed.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-2-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Reportedly, from 19.10 Ubuntu has begun mixing up the location of some
debug symbol files, putting files expected to be in
/usr/lib/debug/usr/lib into /usr/lib/debug/lib instead. Fix by adding
another dso_binary_type.
Example on Ubuntu 20.04
Before:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data ]
$ perf script --call-trace | head -5
uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%)
uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4100
uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4df0
uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4e18
uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc5128
After:
$ perf script --call-trace | head -5
uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%)
uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _start
uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
Reported-by: Travis Downs <travis.downs@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200526155207.9172-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need to pass more data to the scanner so let's start with having it
to take pointer to 'struct parse_events_state' object instead of just
start token.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200524224219.234847-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's no need to pass the given evsel's count to metric data, because
it will be pushed again within the following metric_events loop.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200524224219.234847-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's now possible to put subtest name as a test filter:
$ perf test 'PMU event table sanity'
10: PMU events :
10.1: PMU event table sanity : Ok
Committer testing:
Before:
$ perf test 'PMU event table sanity'
$
After:
$ perf test 'PMU event table sanity'
10: PMU events :
10.1: PMU event table sanity : Ok
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200524224219.234847-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before:
Usage: perf list [<options>] [hw|sw|cache|tracepoint|pmu|sdt|event_glob]
After:
Usage: perf list [<options>] [hw|sw|cache|tracepoint|pmu|sdt|metric|metricgroup|event_glob]
Committer testing:
Before and after we get these outputs on a Lenovo t480s (i7-8650U):
# perf list metricgroup
List of pre-defined events (to be used in -e):
Metric Groups:
BrMispredicts
BrMispredicts_SMT
Branches
Cache_Misses
DSB
FLOPS
FLOPS_SMT
Fetch_BW
IcMiss
Instruction_Type
Memory_BW
Memory_Bound
Memory_Lat
No_group
PGO
Pipeline
Power
Retire
SMT
Summary
TLB
TLB_SMT
TopDownL1
TopDownL1_SMT
TopdownL1
TopdownL1_SMT
#
# perf list metric | head -11
Metrics:
Backend_Bound
[This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend]
Backend_Bound_SMT
[This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU]
Bad_Speculation
[This category represents fraction of slots wasted due to incorrect speculations]
Bad_Speculation_SMT
[This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU]
#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200522064546.164259-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
--xed currently forces less. When piping the output to other scripts
this can waste a lot of CPU time because less is rather slow.
I've seen it using up a full core on its own in a pipeline.
Only force less when the output is actually a terminal.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20200522020914.527564-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove unnecessary commas from events before they are parsed. This
avoids ',' being echoed by parse-events.l.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add --metric-no-group that causes all events within metrics to not be
grouped. This can allow the event to get more time when multiplexed, but
may also lower accuracy.
Add --metric-no-merge option. By default events in different metrics may
be shared if the group of events for one metric is the same or larger
than that of the second. Sharing may increase or lower accuracy and so
is now configurable.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A metric group contains multiple metrics. These metrics may use the same
events. If metrics use separate events then it leads to more
multiplexing and overall metric counts fail to sum to 100%.
Modify how metrics are associated with events so that if the events in
an earlier group satisfy the current metric, the same events are used.
A record of used events is kept and at the end of processing unnecessary
events are eliminated.
Before:
$ perf stat -a -M TopDownL1 sleep 1
Performance counter stats for 'system wide':
920,211,343 uops_issued.any # 0.5 Backend_Bound (16.56%)
1,977,733,128 idq_uops_not_delivered.core (16.56%)
51,668,510 int_misc.recovery_cycles (16.56%)
732,305,692 uops_retired.retire_slots (16.56%)
1,497,621,849 cycles (16.56%)
721,098,274 uops_issued.any # 0.1 Bad_Speculation (16.79%)
1,332,681,791 cycles (16.79%)
552,475,482 uops_retired.retire_slots (16.79%)
47,708,340 int_misc.recovery_cycles (16.79%)
1,383,713,292 cycles
# 0.4 Frontend_Bound (16.76%)
2,013,757,701 idq_uops_not_delivered.core (16.76%)
1,373,363,790 cycles
# 0.1 Retiring (33.54%)
577,302,589 uops_retired.retire_slots (33.54%)
392,766,987 inst_retired.any # 0.3 IPC (50.24%)
1,351,873,350 cpu_clk_unhalted.thread (50.24%)
1,332,510,318 cycles
# 5330041272.0 SLOTS (49.90%)
1.006336145 seconds time elapsed
After:
$ perf stat -a -M TopDownL1 sleep 1
Performance counter stats for 'system wide':
765,949,145 uops_issued.any # 0.1 Bad_Speculation
# 0.5 Backend_Bound (50.09%)
1,883,830,591 idq_uops_not_delivered.core # 0.3 Frontend_Bound (50.09%)
48,237,080 int_misc.recovery_cycles (50.09%)
581,798,385 uops_retired.retire_slots # 0.1 Retiring (50.09%)
1,361,628,527 cycles
# 5446514108.0 SLOTS (50.09%)
391,415,714 inst_retired.any # 0.3 IPC (49.91%)
1,336,486,781 cpu_clk_unhalted.thread (49.91%)
1.005469298 seconds time elapsed
Note: Bad_Speculation + Backend_Bound + Frontend_Bound + Retiring = 100%
after, where as before it is 110%. After there are 2 groups, whereas
before there are 6. After the cycles event appears once, before it
appeared 5 times.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When adding event groups to the group list, insert them in size order.
This performs an insertion sort on the group list. By placing the
largest groups at the front of the group list it is possible to see if a
larger group contains the same events as a later group. This can make
the later group redundant - it can reuse the events from the large
group. A later patch will add this sharing.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently event groups are placed into groups_list at the same time as
the events string containing the events is built. Separate these two
operations and build the groups_list first, then the event string from
the groups_list. This adds an ability to reorder the groups_list that
will be used in a later patch.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use early return in metricgroup__add_metric and try to make the intent
of the returns more intention revealing.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If a metric contains the duration_time event then the event is placed
outside of the metric's group of events. Rather than split the group,
make it so the duration_time is immediately after the group.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Avoid a simple memory leak.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: kp singh <kpsingh@chromium.org>
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200508053629.210324-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch fix potential segment fault triggered in
put_tracepoints_path() when the address of the local variable 'path' be
freed in error path of record_saved_cmdline.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hongbo Yao <yaohongbo@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Link: http://lore.kernel.org/lkml/20200521133218.30150-5-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Need to free "str" before return when asprintf() failed to avoid memory
leak.
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hongbo Yao <yaohongbo@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200521133218.30150-4-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently there's no error message prompted if we failed to start
workload. And we still get some trace which is confusing. Let's tell
users what happened.
Committer testing:
Before:
# perf ftrace nonsense |& head
5) | switch_mm_irqs_off() {
5) 0.400 us | load_new_mm_cr3();
5) 3.261 us | }
------------------------------------------
5) <idle>-0 => <...>-3494
------------------------------------------
5) | finish_task_switch() {
5) ==========> |
5) | smp_irq_work_interrupt() {
# type nonsense
-bash: type: nonsense: not found
#
After:
# perf ftrace nonsense |& head
workload failed: No such file or directory
# type nonsense
-bash: type: nonsense: not found
#
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200510150628.16610-3-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This align ftrace to other perf sub-commands that if no target specified
then we trace all functions.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200510150628.16610-2-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array
member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle and audited _manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520191613.GA26869@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support for new "stat.big-num" boolean option.
This allows a user to set a default for "--no-big-num" for "perf stat"
commands.
--
$ perf config stat.big-num
$ perf stat --event cycles /bin/true
Performance counter stats for '/bin/true':
778,849 cycles
[...]
$ perf config stat.big-num=false
$ perf config stat.big-num
stat.big-num=false
$ perf stat --event cycles /bin/true
Performance counter stats for '/bin/true':
769622 cycles
[...]
--
There is an interaction with "--field-separator" that must be
accommodated, such that specifying "--big-num --field-separator={x}"
still reports an invalid combination of options.
Documentation for perf-config and perf-stat updated.
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/1589991815-17951-1-git-send-email-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
key_scan_pos is a pointer for getting scan position in
bpf__obj_config_map() for each BPF map configuration term,
but it's misused when error not happened.
Committer notes:
The point is that the only user of this is:
tools/perf/util/parse-events.c
err = bpf__config_obj(obj, term, parse_state->evlist, &error_pos);
if (err) bpf__strerror_config_obj(obj, term, parse_state->evlist, &error_pos, err, errbuf, sizeof(errbuf));
And then:
int bpf__strerror_config_obj(struct bpf_object *obj __maybe_unused,
struct parse_events_term *term __maybe_unused,
struct evlist *evlist __maybe_unused,
int *error_pos __maybe_unused, int err,
char *buf, size_t size)
{
bpf__strerror_head(err, buf, size);
bpf__strerror_entry(BPF_LOADER_ERRNO__OBJCONF_MAP_TYPE,
"Can't use this config term with this map type");
bpf__strerror_end(buf, size);
return 0;
}
So this is infrastructure that Wang Nan put in place for providing
better error messages but that he ended up not using, so I'll apply the
fix, its correct even not fixing any real problem at this time.
Fixes: 066dacbf2a32 ("perf bpf: Add API to set values to map entries in a bpf object")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Cheng Jian <cj.chengjian@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520033216.48310-1-bobo.shaobowang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently 'perf stat' supports to print counts at regular interval (-I),
but it's not very easy for user to get the overall statistics.
The patch uses 'evsel->prev_raw_counts' to get counts for summary. Copy
the counts to 'evsel->counts' after printing the interval results.
Next, we just follow the non-interval processing.
Let's see some examples,
root@kbl-ppc:~# perf stat -e cycles -I1000 --interval-count 2
# time counts unit events
1.000412064 2,281,114 cycles
2.001383658 2,547,880 cycles
Performance counter stats for 'system wide':
4,828,994 cycles
2.002860349 seconds time elapsed
root@kbl-ppc:~# perf stat -e cycles,instructions -I1000 --interval-count 2
# time counts unit events
1.000389902 1,536,093 cycles
1.000389902 420,226 instructions # 0.27 insn per cycle
2.001433453 2,213,952 cycles
2.001433453 735,465 instructions # 0.33 insn per cycle
Performance counter stats for 'system wide':
3,750,045 cycles
1,155,691 instructions # 0.31 insn per cycle
2.003023361 seconds time elapsed
root@kbl-ppc:~# perf stat -M CPI,IPC -I1000 --interval-count 2
# time counts unit events
1.000435121 905,303 inst_retired.any # 2.9 CPI
1.000435121 2,663,333 cycles
1.000435121 914,702 inst_retired.any # 0.3 IPC
1.000435121 2,676,559 cpu_clk_unhalted.thread
2.001615941 1,951,092 inst_retired.any # 1.8 CPI
2.001615941 3,551,357 cycles
2.001615941 1,950,837 inst_retired.any # 0.5 IPC
2.001615941 3,551,044 cpu_clk_unhalted.thread
Performance counter stats for 'system wide':
2,856,395 inst_retired.any # 2.2 CPI
6,214,690 cycles
2,865,539 inst_retired.any # 0.5 IPC
6,227,603 cpu_clk_unhalted.thread
2.003403078 seconds time elapsed
Committer testing:
Before:
# perf stat -e cycles -I1000 --interval-count 2
# time counts unit events
1.000618627 26,877,408 cycles
2.001417968 233,672,829 cycles
#
After:
# perf stat -e cycles -I1000 --interval-count 2
# time counts unit events
1.001531815 5,341,388,792 cycles
2.002936530 100,073,912 cycles
Performance counter stats for 'system wide':
5,441,462,704 cycles
2.004893794 seconds time elapsed
#
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-6-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To collect the overall statistics for interval mode, we copy the counts
from evsel->prev_raw_counts to evsel->counts.
For AGGR_GLOBAL mode, because the perf_stat_process_counter creates aggr
values from per cpu values, but the per cpu values are 0, so the
calculated aggr values will be always 0.
This patch uses a trick that saves the previous aggr value to the first
member of perf_counts, then aggr calculation in process_counter_values
can work correctly for AGGR_GLOBAL.
v6:
---
Add comments in perf_evlist__save_aggr_prev_raw_counts.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-5-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It would be useful to support the overall statistics for perf-stat
interval mode. For example, report the summary at the end of "perf-stat
-I" output.
But since perf-stat can support many aggregation modes, such as
--per-thread, --per-socket, -M and etc, we need a solution which doesn't
bring much complexity.
The idea is to use 'evsel->prev_raw_counts' which is updated in each
interval and it's saved with the latest counts. Before reporting the
summary, we copy the counts from evsel->prev_raw_counts to
evsel->counts, and next we just follow non-interval processing.
v5:
---
Don't save the previous aggr value to the member of [cpu0,thread0]
in perf_counts. Originally that was a trick because the
perf_stat_process_counter would create aggr values from per cpu
values. But we don't need to do that all the time. We will
handle it in next patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we want to reset the evsel->prev_raw_counts, zeroing the aggr is
not enough, we need to reset the perf_counts too.
The perf_counts__reset zeros the perf_counts, and it should zero the
aggr too. This patch changes perf_counts__reset to non-static, and calls
it in evsel__reset_prev_raw_counts to reset the prev_raw_counts.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
root@kbl-ppc:~# perf stat --per-thread -e cycles,instructions -I1000 --interval-count 2
1.004171683 perf-3696 8,747,311 cycles
...
1.004171683 perf-3696 691,730 instructions # 0.08 insn per cycle
...
2.006490373 perf-3696 1,749,936 cycles
...
2.006490373 perf-3696 1,484,582 instructions # 0.28 insn per cycle
...
Let's see interval 2.006490373
perf-3696 1,749,936 cycles
perf-3696 1,484,582 instructions # 0.28 insn per cycle
insn per cycle = 1,484,582 / 1,749,936 = 0.85.
But now it's 0.28, that's not correct.
stat_config.stats[] records the per-thread runtime stat. But for
interval mode, it should be reset for each interval.
So now, with this patch,
root@kbl-ppc:~# perf stat --per-thread -e cycles,instructions -I1000 --interval-count 2
1.005818121 perf-8633 9,898,045 cycles
...
1.005818121 perf-8633 693,298 instructions # 0.07 insn per cycle
...
2.007863743 perf-8633 1,551,619 cycles
...
2.007863743 perf-8633 1,317,514 instructions # 0.85 insn per cycle
...
Let's check interval 2.007863743.
insn per cycle = 1,317,514 / 1,551,619 = 0.85. It's correct.
This patch creates runtime_stat_reset, places it next to
untime_stat_new/runtime_stat_delete and moves all runtime_stat
functions before process_interval.
Committer testing:
After the patch:
# perf stat --per-thread -e cycles,instructions -I1000 --interval-count 2 |& grep sssd_nss-1130
2.011309774 sssd_nss-1130 56,585 cycles
2.011309774 sssd_nss-1130 13,121 instructions # 0.23 insn per cycle
# python
>>> 13121.0 / 56585
0.23188124061146947
>>>
Fixes: commit 14e72a21c783 ("perf stat: Update or print per-thread stats")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
