| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
"struct bvec_iter" is defined with the __packed attribute, so it is
aligned on a single byte. On X86 (and on other architectures that support
unaligned addresses in hardware), "struct bvec_iter" is accessed using the
8-byte and 4-byte memory instructions, however these instructions are less
efficient if they operate on unaligned addresses.
(on RISC machines that don't have unaligned access in hardware, GCC
generates byte-by-byte accesses that are very inefficient - see [1])
This commit reorders the entries in "struct dm_verity_io" and "struct
convert_context", so that "struct bvec_iter" is aligned on 8 bytes.
[1] https://lore.kernel.org/all/ZcLuWUNRZadJr0tQ@fedora/T/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
If a userspace process reads (with O_DIRECT) multiple blocks into the same
buffer, dm-crypt reports an authentication error [1]. The error is
reported in a log and it may cause RAID leg being kicked out of the
array.
This commit fixes dm-crypt, so that if integrity verification fails, the
data is read again into a kernel buffer (where userspace can't modify it)
and the integrity tag is rechecked. If the recheck succeeds, the content
of the kernel buffer is copied into the user buffer; if the recheck fails,
an integrity error is reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
It was said that authenticated encryption could produce invalid tag when
the data that is being encrypted is modified [1]. So, fix this problem by
copying the data into the clone bio first and then encrypt them inside the
clone bio.
This may reduce performance, but it is needed to prevent the user from
corrupting the device by writing data with O_DIRECT and modifying them at
the same time.
[1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
If a userspace process reads (with O_DIRECT) multiple blocks into the same
buffer, dm-verity reports an error [1].
This commit fixes dm-verity, so that if hash verification fails, the data
is read again into a kernel buffer (where userspace can't modify it) and
the hash is rechecked. If the recheck succeeds, the content of the kernel
buffer is copied into the user buffer; if the recheck fails, an error is
reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
If a userspace process reads (with O_DIRECT) multiple blocks into the same
buffer, dm-integrity reports an error [1]. The error is reported in a log
and it may cause RAID leg being kicked out of the array.
This commit fixes dm-integrity, so that if integrity verification fails,
the data is read again into a kernel buffer (where userspace can't modify
it) and the integrity tag is rechecked. If the recheck succeeds, the
content of the kernel buffer is copied into the user buffer; if the
recheck fails, an integrity error is reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Do not allow to set phase adjust value for a pin if PF reset is in
progress, this would cause confusing netlink extack errors as the firmware
cannot process the request properly during the reset time.
Return (-EBUSY) and report extack error for the user who tries configure
pin phase adjust during the reset time.
Test by looping execution of below steps until netlink error appears:
- perform PF reset
$ echo 1 > /sys/class/net/<ice PF>/device/reset
- change pin phase adjust value:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-set --json '{"id":0, "phase-adjust":1000}'
Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Do not allow dpll periodic work function to acquire data from firmware
if PF reset is in progress. Acquiring data will cause dmesg errors as the
firmware cannot respond or process the request properly during the reset
time.
Test by looping execution of below step until dmesg error appears:
- perform PF reset
$ echo 1 > /sys/class/net/<ice PF>/device/reset
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Do not allow to acquire data or alter configuration of dpll and pins
through firmware if PF reset is in progress, this would cause confusing
netlink extack errors as the firmware cannot respond or process the
request properly during the reset time.
Return (-EBUSY) and extack error for the user who tries access/modify
the config of dpll/pin through firmware during the reset time.
The PF reset and kernel access to dpll data are both asynchronous. It is
not possible to guard all the possible reset paths with any determinictic
approach. I.e., it is possible that reset starts after reset check is
performed (or if the reset would be checked after mutex is locked), but at
the same time it is not possible to wait for dpll mutex unlock in the
reset flow.
This is best effort solution to at least give a clue to the user
what is happening in most of the cases, knowing that there are possible
race conditions where the user could see a different error received
from firmware due to reset unexpectedly starting.
Test by looping execution of below steps until netlink error appears:
- perform PF reset
$ echo 1 > /sys/class/net/<ice PF>/device/reset
- i.e. try to alter/read dpll/pin config:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--dump pin-get
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The value of phase_adjust for input pin shall be updated in
ice_dpll_pin_state_update(..). Fix by adding proper argument to the
firmware query function call - a pin's struct field pointer where the
phase_adjust value during driver runtime is stored.
Previously the phase_adjust used to misinform user about actual
phase_adjust value. I.e., if phase_adjust was set to a non zero value and
if driver was reloaded, the user would see the value equal 0, which is
not correct - the actual value is equal to value set before driver reload.
Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix the connection state between source DPLL and output pin, updating the
attribute 'state' of 'parent_device'. Previously, the connection state
was broken, and didn't reflect the correct state.
When 'state_on_dpll_set' is called with the value
'DPLL_PIN_STATE_CONNECTED' (1), the output pin will switch to the given
DPLL, and the state of the given DPLL will be set to connected.
E.g.:
--do pin-set --json '{"id":2, "parent-device":{"parent-id":1,
"state": 1 }}'
This command will connect DPLL device with id 1 to output pin with id 2.
When 'state_on_dpll_set' is called with the value
'DPLL_PIN_STATE_DISCONNECTED' (2) and the given DPLL is currently
connected, then the output pin will be disabled.
E.g:
--do pin-set --json '{"id":2, "parent-device":{"parent-id":1,
"state": 2 }}'
This command will disable output pin with id 2 if DPLL device with ID 1 is
connected to it; otherwise, the command is ignored.
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
On some systems, sys_membarrier can be very expensive, causing overall
slowdowns for everything. So put a lock on the path in order to
serialize the accesses to prevent the ability for this to be called at
too high of a frequency and saturate the machine.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-and-tested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Fixes: 22e4ebb97582 ("membarrier: Provide expedited private command")
Fixes: c5f58bd58f43 ("membarrier: Provide GLOBAL_EXPEDITED command")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.8:
- A tqma8mpql device tree fix to correct audio codec iov-supply.
- A couple of USB-C connector DT description revert to fix regression
on imx8mp-dhcom-pdk3 and imx8mn-var-som-symphony board.
- Fix valid range check for imx-weim bus driver.
- Disable UART4 on Data Modul i.MX8M Plus eDM SBC to avoid boot hang
in case that RDC protection is in place.
* tag 'imx-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
bus: imx-weim: fix valid range check
Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
arm64: dts: tqma8mpql: fix audio codec iov-supply
arm64: dts: imx8mp: Disable UART4 by default on Data Modul i.MX8M Plus eDM SBC
Link: https://lore.kernel.org/r/20240206151744.2459-1-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
Cc: stable@vger.kernel.org
Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors")
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240205102337.439002-1-alexander.sverdlin@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is no point in requesting 1 tile on VPU40xx as the FW will
probably need more tiles to run workloads, so it will have to
reconfigure PLL anyway. Don't enable any tiles and allow the FW to
perform initial tile configuration.
This improves NPU boot stability as the tiles are always enabled only
by the FW from the same initial state.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Cc: stable@vger.kernel.org
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220131624.1447813-1-jacek.lawrynowicz@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-02-20
this is a pull request of 9 patches for net-next/master.
The first patch is by Francesco Dolcini and removes a redundant check
for pm_clock_support from the m_can driver.
Martin Hundebøll contributes 3 patches to the m_can/tcan4x5x driver to
allow resume upon RX of a CAN frame.
3 patches by Srinivas Goud add support for ECC statistics to the
xilinx_can driver.
The last 2 patches are by Oliver Hartkopp and me, target the CAN RAW
protocol and fix an error in the getsockopt() for CAN-XL introduced in
the previous pull request to net-next (linux-can-next-for-6.9-20240213).
linux-can-next-for-6.9-20240220
* tag 'linux-can-next-for-6.9-20240220' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: raw: raw_getsockopt(): reduce scope of err
can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS
can: xilinx_can: Add ethtool stats interface for ECC errors
can: xilinx_can: Add ECC support
dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
can: tcan4x5x: support resuming from rx interrupt signal
can: m_can: allow keeping the transceiver running in suspend
dt-bindings: can: tcan4x5x: Document the wakeup-source flag
can: m_can: remove redundant check for pm_clock_support
====================
Link: https://lore.kernel.org/r/20240220085130.2936533-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Randomly a Lenovo Z13 will trigger a kernel warning traceback from this
condition:
```
if (WARN_ON((profile < 0) || (profile >= ARRAY_SIZE(profile_names))))
```
This happens because thinkpad-acpi always assumes that
convert_dytc_to_profile() successfully updated the profile. On the
contrary a condition can occur that when dytc_profile_refresh() is called
the profile doesn't get updated as there is a -EOPNOTSUPP branch.
Catch this situation and avoid updating the profile. Also log this into
dynamic debugging in case any other modes should be added in the future.
Fixes: c3bfcd4c6762 ("platform/x86: thinkpad_acpi: Add platform profile support")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217022311.113879-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Commit 14c200b7ca46 ("platform/x86: intel-vbtn: Fix missing
tablet-mode-switch events") causes 2 issues on the ThinkPad X1 Tablet Gen2:
1. The ThinkPad will wake up immediately from suspend
2. When put in tablet mode SW_TABLET_MODE reverts to 0 after about 1 second
Both these issues are caused by the "VBDL" ACPI method call added
at the end of the notify_handler.
And it never became entirely clear if this call is even necessary to fix
the issue of missing tablet-mode-switch events on the Dell Inspiron 7352.
Drop the "VBDL" ACPI method call again to fix the 2 issues this is
causing on the ThinkPad X1 Tablet Gen2.
Fixes: 14c200b7ca46 ("platform/x86: intel-vbtn: Fix missing tablet-mode-switch events")
Reported-by: Alexander Kobel <a-kobel@a-kobel.de>
Closes: https://lore.kernel.org/platform-driver-x86/295984ce-bd4b-49bd-adc5-ffe7c898d7f0@a-kobel.de/
Cc: regressions@lists.linux.dev
Cc: Arnold Gozum <arngozum@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/20240216203300.245826-1-hdegoede@redhat.com
|
|
The Acer B1 750 tablet used a Novatek NVT-ts touchscreen,
not a Goodix touchscreen.
Rename acer_b1_750_goodix_gpios to acer_b1_750_nvt_ts_gpios
to correctly reflect this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-5-hdegoede@redhat.com
|
|
After commit b286f4e87e32 ("serial: core: Move tty and serdev to be
children of serial core port device") x86_instantiate_serdev() no longer
works due to the serdev-controller-device moving in the device hierarchy
from (e.g.) /sys/devices/pci0000:00/8086228A:00/serial0 to
/sys/devices/pci0000:00/8086228A:00/8086228A:00:0/8086228A:00:0.0/serial0
Use the new get_serdev_controller() helper function to fix this.
Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-4-hdegoede@redhat.com
|
|
In some cases UART attached devices which require an in kernel driver,
e.g. UART attached Bluetooth HCIs are described in the ACPI tables
by an ACPI device with a broken or missing UartSerialBusV2() resource.
This causes the kernel to create a /dev/ttyS# char-device for the UART
instead of creating an in kernel serdev-controller + serdev-device pair
for the in kernel driver.
The quirk handling in acpi_quirk_skip_serdev_enumeration() makes the kernel
create a serdev-controller device for these UARTs instead of a /dev/ttyS#.
Instantiating the actual serdev-device to bind to is up to pdx86 code,
so far this was handled by the x86-android-tablets code. But since
commit b286f4e87e32 ("serial: core: Move tty and serdev to be children of
serial core port device") the serdev-controller device has moved in the
device hierarchy from (e.g.) /sys/devices/pci0000:00/8086228A:00/serial0 to
/sys/devices/pci0000:00/8086228A:00/8086228A:00:0/8086228A:00:0.0/serial0 .
This makes this a bit trickier to do and another driver is in the works
which will also need this functionality.
Add a new helper to get the serdev-controller device, so that the new
code for this can be shared.
Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-3-hdegoede@redhat.com
|
|
Yogabook1 X90
After commit 4014ae236b1d ("platform/x86: x86-android-tablets: Stop using
gpiolib private APIs") the touchscreen in the keyboard half of
the Lenovo Yogabook1 X90 stopped working with the following error:
Goodix-TS i2c-goodix_ts: error -EBUSY: Failed to get irq GPIO
The problem is that when getting the IRQ for instantiated i2c_client-s
from a GPIO (rather then using an IRQ directly from the IOAPIC),
x86_acpi_irq_helper_get() now properly requests the GPIO, which disallows
other drivers from requesting it. Normally this is a good thing, but
the goodix touchscreen also uses the IRQ as an output during reset
to select which of its 2 possible I2C addresses should be used.
Add a new free_gpio flag to struct x86_acpi_irq_data to deal with this
and release the GPIO after getting the IRQ in this special case.
Fixes: 4014ae236b1d ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-2-hdegoede@redhat.com
|
|
The fields in SMCR_EL1 reset to an architecturally UNKNOWN value. Since we
do not otherwise manage the traps configured in this register at runtime we
need to reconfigure them after a suspend in case nothing else was kind
enough to preserve them for us. Do so for SMCR_EL1.EZT0.
Fixes: d4913eee152d ("arm64/sme: Add basic enumeration for SME2")
Reported-by: Jackson Cooper-Driver <Jackson.Cooper-Driver@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm64-sme-resume-v3-2-17e05e493471@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The fields in SMCR_EL1 and SMPRI_EL1 reset to an architecturally UNKNOWN
value. Since we do not otherwise manage the traps configured in this
register at runtime we need to reconfigure them after a suspend in case
nothing else was kind enough to preserve them for us.
The vector length will be restored as part of restoring the SME state for
the next SME using task.
Fixes: a1f4ccd25cc2 ("arm64/sme: Provide Kconfig for SME")
Reported-by: Jackson Cooper-Driver <Jackson.Cooper-Driver@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm64-sme-resume-v3-1-17e05e493471@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This reverts commit f9daab0ad01cf9d165dbbbf106ca4e61d06e7fe8.
Geert reports that his particular GCC 5.5 vintage toolchain fails to
build an arm64 defconfig because of this change:
| arch/arm64/include/asm/jump_label.h:25:2: error: invalid 'asm':
| invalid operand
| asm goto(
^
Aopparently, this is something we claim to support, so let's revert back
to the old jump label constraint for now while discussions about raising
the minimum GCC version are ongoing.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/CAMuHMdX+6fnAf8Hm6EqYJPAjrrLO9T7c=Gu3S8V_pqjSDowJ6g@mail.gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CPMU filter value is described as 4B length in CXL r3.0 8.2.7.2.2.
However, it is used as 2B length in code and comments.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Hojin Nam <hj96.nam@samsung.com>
Link: https://lore.kernel.org/r/20240216014522.32321-1-hj96.nam@samsung.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Similar to gpiochip_generic_request() and gpiochip_generic_free() the
gpiochip_generic_config() function needs to handle the case where there
are no pinctrl pins mapped to the GPIOs, usually through the gpio-ranges
device tree property.
Commit f34fd6ee1be8 ("gpio: dwapb: Use generic request, free and
set_config") set the .set_config callback to gpiochip_generic_config()
in the dwapb GPIO driver so the GPIO API can set pinctrl configuration
for the corresponding pins. Most boards using the dwapb driver do not
set the gpio-ranges device tree property though, and in this case
gpiochip_generic_config() would return -EPROPE_DEFER rather than the
previous -ENOTSUPP return value. This in turn makes
gpio_set_config_with_argument_optional() fail and propagate the error to
any driver requesting GPIOs.
Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/linux-gpio/ZdC_g3U4l0CJIWzh@xhacker/
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Currently, rebooting a pseries nested qemu-kvm guest (L2) results in
below error as L1 qemu sends PVR value 'arch_compat' == 0 via
ppc_set_compat ioctl. This triggers a condition failure in
kvmppc_set_arch_compat() resulting in an EINVAL.
qemu-system-ppc64: Unable to set CPU compatibility mode in KVM: Invalid
argument
Also, a value of 0 for arch_compat generally refers the default
compatibility of the host. But, arch_compat, being a Guest Wide Element
in nested API v2, cannot be set to 0 in GSB as PowerVM (L0) expects a
non-zero value. A value of 0 triggers a kernel trap during a reboot and
consequently causes it to fail:
[ 22.106360] reboot: Restarting system
KVM: unknown exit, hardware reason ffffffffffffffea
NIP 0000000000000100 LR 000000000000fe44 CTR 0000000000000000 XER 0000000020040092 CPU#0
MSR 0000000000001000 HID0 0000000000000000 HF 6c000000 iidx 3 didx 3
TB 00000000 00000000 DECR 0
GPR00 0000000000000000 0000000000000000 c000000002a8c300 000000007fe00000
GPR04 0000000000000000 0000000000000000 0000000000001002 8000000002803033
GPR08 000000000a000000 0000000000000000 0000000000000004 000000002fff0000
GPR12 0000000000000000 c000000002e10000 0000000105639200 0000000000000004
GPR16 0000000000000000 000000010563a090 0000000000000000 0000000000000000
GPR20 0000000105639e20 00000001056399c8 00007fffe54abab0 0000000105639288
GPR24 0000000000000000 0000000000000001 0000000000000001 0000000000000000
GPR28 0000000000000000 0000000000000000 c000000002b30840 0000000000000000
CR 00000000 [ - - - - - - - - ] RES 000@ffffffffffffffff
SRR0 0000000000000000 SRR1 0000000000000000 PVR 0000000000800200 VRSAVE 0000000000000000
SPRG0 0000000000000000 SPRG1 0000000000000000 SPRG2 0000000000000000 SPRG3 0000000000000000
SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000
HSRR0 0000000000000000 HSRR1 0000000000000000
CFAR 0000000000000000
LPCR 0000000000020400
PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000
kernel:trap=0xffffffea | pc=0x100 | msr=0x1000
This patch updates kvmppc_set_arch_compat() to use the host PVR value if
'compat_pvr' == 0 indicating that qemu doesn't want to enforce any
specific PVR compat mode.
The relevant part of the code might need a rework if PowerVM implements
a support for `arch_compat == 0` in nestedv2 API.
Fixes: 19d31c5f1157 ("KVM: PPC: Add support for nestedv2 guests")
Reviewed-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240207054526.3720087-1-amachhiw@linux.ibm.com
|
|
syzbot managed to trigger following splat:
BUG: KASAN: use-after-free in __skb_flow_dissect+0x4a3b/0x5e50
Read of size 1 at addr ffff888208a4000e by task a.out/2313
[..]
__skb_flow_dissect+0x4a3b/0x5e50
__skb_get_hash+0xb4/0x400
ip_tunnel_xmit+0x77e/0x26f0
ipip_tunnel_xmit+0x298/0x410
..
Analysis shows that the skb has a valid ->head, but bogus ->data
pointer.
skb->data gets its bogus value via the neigh layer, which does:
1556 __skb_pull(skb, skb_network_offset(skb));
... and the skb was already dodgy at this point:
skb_network_offset(skb) returns a negative value due to an
earlier overflow of skb->network_header (u16). __skb_pull thus
"adjusts" skb->data by a huge offset, pointing outside skb->head
area.
Allow debug builds to splat when we try to pull/push more than
INT_MAX bytes.
After this, the syzkaller reproducer yields a more precise splat
before the flow dissector attempts to read off skb->data memory:
WARNING: CPU: 5 PID: 2313 at include/linux/skbuff.h:2653 neigh_connected_output+0x28e/0x400
ip_finish_output2+0xb25/0xed0
iptunnel_xmit+0x4ff/0x870
ipgre_xmit+0x78e/0xbb0
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240216113700.23013-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Last major reorg happened in commit 9115e8cd2a0c ("net: reorganize
struct sock for better data locality")
Since then, many changes have been done.
Before SO_PEEK_OFF support is added to TCP, we need
to move sk_peek_off to a better location.
It is time to make another pass, and add six groups,
without explicit alignment.
- sock_write_rx (following sk_refcnt) read-write fields in rx path.
- sock_read_rx read-mostly fields in rx path.
- sock_read_rxtx read-mostly fields in both rx and tx paths.
- sock_write_rxtx read-write fields in both rx and tx paths.
- sock_write_tx read-write fields in tx paths.
- sock_read_tx read-mostly fields in tx paths.
Results on TCP_RR benchmarks seem to show a gain (4 to 5 %).
It is possible UDP needs a change, because sk_peek_off
shares a cache line with sk_receive_queue.
If this the case, we can exchange roles of sk->sk_receive
and up->reader_queue queues.
After this change, we have the following layout:
struct sock {
struct sock_common __sk_common; /* 0 0x88 */
/* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
__u8 __cacheline_group_begin__sock_write_rx[0]; /* 0x88 0 */
atomic_t sk_drops; /* 0x88 0x4 */
__s32 sk_peek_off; /* 0x8c 0x4 */
struct sk_buff_head sk_error_queue; /* 0x90 0x18 */
struct sk_buff_head sk_receive_queue; /* 0xa8 0x18 */
/* --- cacheline 3 boundary (192 bytes) --- */
struct {
atomic_t rmem_alloc; /* 0xc0 0x4 */
int len; /* 0xc4 0x4 */
struct sk_buff * head; /* 0xc8 0x8 */
struct sk_buff * tail; /* 0xd0 0x8 */
} sk_backlog; /* 0xc0 0x18 */
struct {
atomic_t rmem_alloc; /* 0 0x4 */
int len; /* 0x4 0x4 */
struct sk_buff * head; /* 0x8 0x8 */
struct sk_buff * tail; /* 0x10 0x8 */
/* size: 24, cachelines: 1, members: 4 */
/* last cacheline: 24 bytes */
};
__u8 __cacheline_group_end__sock_write_rx[0]; /* 0xd8 0 */
__u8 __cacheline_group_begin__sock_read_rx[0]; /* 0xd8 0 */
rcu * sk_rx_dst; /* 0xd8 0x8 */
int sk_rx_dst_ifindex; /* 0xe0 0x4 */
u32 sk_rx_dst_cookie; /* 0xe4 0x4 */
unsigned int sk_ll_usec; /* 0xe8 0x4 */
unsigned int sk_napi_id; /* 0xec 0x4 */
u16 sk_busy_poll_budget; /* 0xf0 0x2 */
u8 sk_prefer_busy_poll; /* 0xf2 0x1 */
u8 sk_userlocks; /* 0xf3 0x1 */
int sk_rcvbuf; /* 0xf4 0x4 */
rcu * sk_filter; /* 0xf8 0x8 */
/* --- cacheline 4 boundary (256 bytes) --- */
union {
rcu * sk_wq; /* 0x100 0x8 */
struct socket_wq * sk_wq_raw; /* 0x100 0x8 */
}; /* 0x100 0x8 */
union {
rcu * sk_wq; /* 0 0x8 */
struct socket_wq * sk_wq_raw; /* 0 0x8 */
};
void (*sk_data_ready)(struct sock *); /* 0x108 0x8 */
long sk_rcvtimeo; /* 0x110 0x8 */
int sk_rcvlowat; /* 0x118 0x4 */
__u8 __cacheline_group_end__sock_read_rx[0]; /* 0x11c 0 */
__u8 __cacheline_group_begin__sock_read_rxtx[0]; /* 0x11c 0 */
int sk_err; /* 0x11c 0x4 */
struct socket * sk_socket; /* 0x120 0x8 */
struct mem_cgroup * sk_memcg; /* 0x128 0x8 */
rcu * sk_policy[2]; /* 0x130 0x10 */
/* --- cacheline 5 boundary (320 bytes) --- */
__u8 __cacheline_group_end__sock_read_rxtx[0]; /* 0x140 0 */
__u8 __cacheline_group_begin__sock_write_rxtx[0]; /* 0x140 0 */
socket_lock_t sk_lock; /* 0x140 0x20 */
u32 sk_reserved_mem; /* 0x160 0x4 */
int sk_forward_alloc; /* 0x164 0x4 */
u32 sk_tsflags; /* 0x168 0x4 */
__u8 __cacheline_group_end__sock_write_rxtx[0]; /* 0x16c 0 */
__u8 __cacheline_group_begin__sock_write_tx[0]; /* 0x16c 0 */
int sk_write_pending; /* 0x16c 0x4 */
atomic_t sk_omem_alloc; /* 0x170 0x4 */
int sk_sndbuf; /* 0x174 0x4 */
int sk_wmem_queued; /* 0x178 0x4 */
refcount_t sk_wmem_alloc; /* 0x17c 0x4 */
/* --- cacheline 6 boundary (384 bytes) --- */
unsigned long sk_tsq_flags; /* 0x180 0x8 */
union {
struct sk_buff * sk_send_head; /* 0x188 0x8 */
struct rb_root tcp_rtx_queue; /* 0x188 0x8 */
}; /* 0x188 0x8 */
union {
struct sk_buff * sk_send_head; /* 0 0x8 */
struct rb_root tcp_rtx_queue; /* 0 0x8 */
};
struct sk_buff_head sk_write_queue; /* 0x190 0x18 */
u32 sk_dst_pending_confirm; /* 0x1a8 0x4 */
u32 sk_pacing_status; /* 0x1ac 0x4 */
struct page_frag sk_frag; /* 0x1b0 0x10 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct timer_list sk_timer; /* 0x1c0 0x28 */
/* XXX last struct has 4 bytes of padding */
unsigned long sk_pacing_rate; /* 0x1e8 0x8 */
atomic_t sk_zckey; /* 0x1f0 0x4 */
atomic_t sk_tskey; /* 0x1f4 0x4 */
__u8 __cacheline_group_end__sock_write_tx[0]; /* 0x1f8 0 */
__u8 __cacheline_group_begin__sock_read_tx[0]; /* 0x1f8 0 */
unsigned long sk_max_pacing_rate; /* 0x1f8 0x8 */
/* --- cacheline 8 boundary (512 bytes) --- */
long sk_sndtimeo; /* 0x200 0x8 */
u32 sk_priority; /* 0x208 0x4 */
u32 sk_mark; /* 0x20c 0x4 */
rcu * sk_dst_cache; /* 0x210 0x8 */
netdev_features_t sk_route_caps; /* 0x218 0x8 */
u16 sk_gso_type; /* 0x220 0x2 */
u16 sk_gso_max_segs; /* 0x222 0x2 */
unsigned int sk_gso_max_size; /* 0x224 0x4 */
gfp_t sk_allocation; /* 0x228 0x4 */
u32 sk_txhash; /* 0x22c 0x4 */
u8 sk_pacing_shift; /* 0x230 0x1 */
bool sk_use_task_frag; /* 0x231 0x1 */
__u8 __cacheline_group_end__sock_read_tx[0]; /* 0x232 0 */
u8 sk_gso_disabled:1; /* 0x232: 0 0x1 */
u8 sk_kern_sock:1; /* 0x232:0x1 0x1 */
u8 sk_no_check_tx:1; /* 0x232:0x2 0x1 */
u8 sk_no_check_rx:1; /* 0x232:0x3 0x1 */
/* XXX 4 bits hole, try to pack */
u8 sk_shutdown; /* 0x233 0x1 */
u16 sk_type; /* 0x234 0x2 */
u16 sk_protocol; /* 0x236 0x2 */
unsigned long sk_lingertime; /* 0x238 0x8 */
/* --- cacheline 9 boundary (576 bytes) --- */
struct proto * sk_prot_creator; /* 0x240 0x8 */
rwlock_t sk_callback_lock; /* 0x248 0x8 */
int sk_err_soft; /* 0x250 0x4 */
u32 sk_ack_backlog; /* 0x254 0x4 */
u32 sk_max_ack_backlog; /* 0x258 0x4 */
kuid_t sk_uid; /* 0x25c 0x4 */
spinlock_t sk_peer_lock; /* 0x260 0x4 */
int sk_bind_phc; /* 0x264 0x4 */
struct pid * sk_peer_pid; /* 0x268 0x8 */
const struct cred * sk_peer_cred; /* 0x270 0x8 */
ktime_t sk_stamp; /* 0x278 0x8 */
/* --- cacheline 10 boundary (640 bytes) --- */
int sk_disconnects; /* 0x280 0x4 */
u8 sk_txrehash; /* 0x284 0x1 */
u8 sk_clockid; /* 0x285 0x1 */
u8 sk_txtime_deadline_mode:1; /* 0x286: 0 0x1 */
u8 sk_txtime_report_errors:1; /* 0x286:0x1 0x1 */
u8 sk_txtime_unused:6; /* 0x286:0x2 0x1 */
/* XXX 1 byte hole, try to pack */
void * sk_user_data; /* 0x288 0x8 */
void * sk_security; /* 0x290 0x8 */
struct sock_cgroup_data sk_cgrp_data; /* 0x298 0x8 */
void (*sk_state_change)(struct sock *); /* 0x2a0 0x8 */
void (*sk_write_space)(struct sock *); /* 0x2a8 0x8 */
void (*sk_error_report)(struct sock *); /* 0x2b0 0x8 */
int (*sk_backlog_rcv)(struct sock *, struct sk_buff *); /* 0x2b8 0x8 */
/* --- cacheline 11 boundary (704 bytes) --- */
void (*sk_destruct)(struct sock *); /* 0x2c0 0x8 */
rcu * sk_reuseport_cb; /* 0x2c8 0x8 */
rcu * sk_bpf_storage; /* 0x2d0 0x8 */
struct callback_head sk_rcu __attribute__((__aligned__(8))); /* 0x2d8 0x10 */
netns_tracker ns_tracker; /* 0x2e8 0x8 */
/* size: 752, cachelines: 12, members: 105 */
/* sum members: 749, holes: 1, sum holes: 1 */
/* sum bitfield members: 12 bits, bit holes: 1, sum bit holes: 4 bits */
/* paddings: 1, sum paddings: 4 */
/* forced alignments: 1 */
/* last cacheline: 48 bytes */
};
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240216162006.2342759-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Netronome graciously transferred the original NIPA repo
to our new netdev umbrella org. Link to that instead of
my private fork.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240216161945.2208842-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The variable len being initialized with a value that is never read, an
if statement is initializing it in both paths of the if statement.
The initialization is redundant and can be removed.
Cleans up clang scan build warning:
net/ipv4/tcp_ao.c:512:11: warning: Value stored to 'len' during its
initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240216125443.2107244-1-colin.i.king@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzkaller reported an overflown write in arp_req_get(). [0]
When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour
entry and copies neigh->ha to struct arpreq.arp_ha.sa_data.
The arp_ha here is struct sockaddr, not struct sockaddr_storage, so
the sa_data buffer is just 14 bytes.
In the splat below, 2 bytes are overflown to the next int field,
arp_flags. We initialise the field just after the memcpy(), so it's
not a problem.
However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN),
arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL)
in arp_ioctl() before calling arp_req_get().
To avoid the overflow, let's limit the max length of memcpy().
Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible
array in struct sockaddr") just silenced syzkaller.
[0]:
memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14)
WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128
Modules linked in:
CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014
RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128
Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6
RSP: 0018:ffffc900050b7998 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001
RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000
R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010
FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261
inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981
sock_do_ioctl+0xdf/0x260 net/socket.c:1204
sock_ioctl+0x3ef/0x650 net/socket.c:1321
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x64/0xce
RIP: 0033:0x7f172b262b8d
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d
RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003
RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000
</TASK>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Bjoern Doebel <doebel@amazon.de>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240215230516.31330-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Make an unregister in case of unsuccessful registration.
Fixes: 687125b5799c ("devlink: split out core code")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215203400.29976-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Fixes: 915d7e5e5930 ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215202717.29815-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The max length of volume->vid value is 20 characters.
So increase idbuf[] size up to 24 to avoid overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240211150442.3416-1-d.dulov@aladdin.ru/ # v1
Link: https://lore.kernel.org/r/20240212083347.10742-1-d.dulov@aladdin.ru/ # v2
Link: https://lore.kernel.org/r/20240219143906.138346-3-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When searching for a matching peer, all addresses need to be searched,
not just the ipv6 ones in the fs_addresses6 list.
Given that the lists no longer contain addresses, there is little
reason to splitting things between separate lists, so unify them
into a single list.
When processing an incoming callback from an ipv4 address, this would
lead to a failure to set call->server, resulting in the callback being
ignored and the client seeing stale contents.
Fixes: 72904d7b9bfb ("rxrpc, afs: Allow afs to pin rxrpc_peer objects")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008035.html
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008037.html # v1
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008066.html # v2
Link: https://lore.kernel.org/r/20240219143906.138346-2-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The following memory leak was reported after unbinding /dev/cachefiles:
==================================================================
unreferenced object 0xffff9b674176e3c0 (size 192):
comm "cachefilesd2", pid 680, jiffies 4294881224
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc ea38a44b):
[<ffffffff8eb8a1a5>] kmem_cache_alloc+0x2d5/0x370
[<ffffffff8e917f86>] prepare_creds+0x26/0x2e0
[<ffffffffc002eeef>] cachefiles_determine_cache_security+0x1f/0x120
[<ffffffffc00243ec>] cachefiles_add_cache+0x13c/0x3a0
[<ffffffffc0025216>] cachefiles_daemon_write+0x146/0x1c0
[<ffffffff8ebc4a3b>] vfs_write+0xcb/0x520
[<ffffffff8ebc5069>] ksys_write+0x69/0xf0
[<ffffffff8f6d4662>] do_syscall_64+0x72/0x140
[<ffffffff8f8000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
==================================================================
Put the reference count of cache_cred in cachefiles_daemon_unbind() to
fix the problem. And also put cache_cred in cachefiles_add_cache() error
branch to avoid memory leaks.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
CC: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240217081431.796809-1-libaokun1@huawei.com
Acked-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Reduce the scope of the variable "err" to the individual cases. This
is to avoid the mistake of setting "err" in the mistaken belief that
it will be evaluated later.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240220-raw-setsockopt-v1-1-7d34cb1377fc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Mina Almasry says:
====================
Abstract page from net stack
This series is a prerequisite to the devmem TCP series. For a full
snapshot of the code which includes these changes, feel free to check:
https://github.com/mina/linux/commits/tcpdevmem-rfcv5/
Currently these components in the net stack use the struct page
directly:
1. Drivers.
2. Page pool.
3. skb_frag_t.
To add support for new (non struct page) memory types to the net stack, we
must first abstract the current memory type.
Originally the plan was to reuse struct page* for the new memory types,
and to set the LSB on the page* to indicate it's not really a page.
However, for safe compiler type checking we need to introduce a new type.
struct netmem is introduced to abstract the underlying memory type.
Currently it's a no-op abstraction that is always a struct page underneath.
In parallel there is an undergoing effort to add support for devmem to the
net stack:
https://lore.kernel.org/netdev/20231208005250.2910004-1-almasrymina@google.com/
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
====================
Link: https://lore.kernel.org/r/20240214223405.1972973-1-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use struct netmem* instead of page in skb_frag_t. Currently struct
netmem* is always a struct page underneath, but the abstraction
allows efforts to add support for skb frags not backed by pages.
There is unfortunately 1 instance where the skb_frag_t is assumed to be
a exactly a bio_vec in kcm. For this case, WARN_ON_ONCE and return error
before doing a cast.
Add skb[_frag]_fill_netmem_*() and skb_add_rx_frag_netmem() helpers so
that the API can be used to create netmem skbs.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the netmem_ref type, an abstraction for network memory.
To add support for new memory types to the net stack, we must first
abstract the current memory type. Currently parts of the net stack
use struct page directly:
- page_pool
- drivers
- skb_frag_t
Originally the plan was to reuse struct page* for the new memory types,
and to set the LSB on the page* to indicate it's not really a page.
However, for compiler type checking we need to introduce a new type.
netmem_ref is introduced to abstract the underlying memory type.
Currently it's a no-op abstraction that is always a struct page
underneath. In parallel there is an undergoing effort to add support
for devmem to the net stack:
https://lore.kernel.org/netdev/20231208005250.2910004-1-almasrymina@google.com/
netmem_ref can be pointers to different underlying memory types, and the
low bits are set to indicate the memory type. Helpers are provided
to convert netmem pointers to the underlying memory type (currently only
struct page). In the devmem series helpers are provided so that calling
code can use netmem without worrying about the underlying memory type
unless absolutely necessary.
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since the merge of b717dfbf73e8 ("Revert "usb: typec: tcpm: fix
cc role at port reset"") into mainline the LibreTech Renegade
Elite/Firefly has died during boot, the main symptom observed in testing
is a sudden stop in console output. Gábor Stefanik identified in review
that the patch would cause power to be removed from devices without
batteries (like this board), observing that while the patch is correct
according to the spec this appears to be an oversight in the spec.
Given that the change makes previously working systems unusable let's
revert it, there was some discussion of identifying systems that have
alternative power and implementing the standards conforming behaviour in
only that case.
Fixes: b717dfbf73e8 ("Revert "usb: typec: tcpm: fix cc role at port reset"")
Cc: stable <stable@kernel.org>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240212-usb-fix-renegade-v1-1-22c43c88d635@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The code for the CAN_RAW_XL_VCID_OPTS getsockopt() was incompletely adopted
from the CAN_RAW_FILTER getsockopt().
Add the missing put_user() and return statements.
Flagged by Smatch.
Fixes: c83c22ec1493 ("can: canxl: add virtual CAN network identifier support")
Reported-by: Simon Horman <horms@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20240219200021.12113-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
if you have a variable that holds NULL or a pointer to live struct mount,
do not shove ERR_PTR() into it - not if you later treat "not NULL" as
"holds a pointer to object".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
During VMentry VERW is executed to mitigate MDS. After VERW, any memory
access like register push onto stack may put host data in MDS affected
CPU buffers. A guest can then use MDS to sample host data.
Although likelihood of secrets surviving in registers at current VERW
callsite is less, but it can't be ruled out. Harden the MDS mitigation
by moving the VERW mitigation late in VMentry path.
Note that VERW for MMIO Stale Data mitigation is unchanged because of
the complexity of per-guest conditional VERW which is not easy to handle
that late in asm with no GPRs available. If the CPU is also affected by
MDS, VERW is unconditionally executed late in asm regardless of guest
having MMIO access.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-6-a6216d83edb7%40linux.intel.com
|
|
Use EFLAGS.CF instead of EFLAGS.ZF to track whether to use VMRESUME versus
VMLAUNCH. Freeing up EFLAGS.ZF will allow doing VERW, which clobbers ZF,
for MDS mitigations as late as possible without needing to duplicate VERW
for both paths.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-5-a6216d83edb7%40linux.intel.com
|
|
The VERW mitigation at exit-to-user is enabled via a static branch
mds_user_clear. This static branch is never toggled after boot, and can
be safely replaced with an ALTERNATIVE() which is convenient to use in
asm.
Switch to ALTERNATIVE() to use the VERW mitigation late in exit-to-user
path. Also remove the now redundant VERW in exc_nmi() and
arch_exit_to_user_mode().
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-4-a6216d83edb7%40linux.intel.com
|
|
As done for entry_64, add support for executing VERW late in exit to
user path for 32-bit mode.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-3-a6216d83edb7%40linux.intel.com
|
|
Mitigation for MDS is to use VERW instruction to clear any secrets in
CPU Buffers. Any memory accesses after VERW execution can still remain
in CPU buffers. It is safer to execute VERW late in return to user path
to minimize the window in which kernel data can end up in CPU buffers.
There are not many kernel secrets to be had after SWITCH_TO_USER_CR3.
Add support for deploying VERW mitigation after user register state is
restored. This helps minimize the chances of kernel data ending up into
CPU buffers after executing VERW.
Note that the mitigation at the new location is not yet enabled.
Corner case not handled
=======================
Interrupts returning to kernel don't clear CPUs buffers since the
exit-to-user path is expected to do that anyways. But, there could be
a case when an NMI is generated in kernel after the exit-to-user path
has cleared the buffers. This case is not handled and NMI returning to
kernel don't clear CPU buffers because:
1. It is rare to get an NMI after VERW, but before returning to userspace.
2. For an unprivileged user, there is no known way to make that NMI
less rare or target it.
3. It would take a large number of these precisely-timed NMIs to mount
an actual attack. There's presumably not enough bandwidth.
4. The NMI in question occurs after a VERW, i.e. when user state is
restored and most interesting data is already scrubbed. Whats left
is only the data that NMI touches, and that may or may not be of
any interest.
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-2-a6216d83edb7%40linux.intel.com
|
