summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-20selftests/bpf: add pre bpf_prog_test_run_opts() callback for test_loaderEduard Zingerman
When a test case is annotated with __retval tag the test_loader engine would use libbpf's bpf_prog_test_run_opts() to do a test run of the program and compare retvals. This commit allows to perform arbitrary actions on bpf object right before test loader invokes bpf_prog_test_run_opts(). This could be used to setup some state for program execution, e.g. fill some maps. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230420232317.2181776-4-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-20selftests/bpf: fix __retval() being always ignoredEduard Zingerman
Florian Westphal found a bug in and suggested a fix for test_loader.c processing of __retval tag. Because of this bug the function test_loader.c:do_prog_test_run() never executed and all __retval test tags were ignored. If this bug is fixed a number of test cases from progs/verifier_array_access.c fail with retval not matching the expected value. This test was recently converted to use test_loader.c and inline assembly in [1]. When doing the conversion I missed the important detail of test_verifier.c operation: when it creates fixup_map_array_ro, fixup_map_array_wo and fixup_map_array_small it populates these maps with a dummy record. Disabling the __retval checks for the affected verifier_array_access in this commit to avoid false-postivies in any potential bisects. The issue is addressed in the next patch. I verified that the __retval tags are now respected by changing expected return values for all tests annotated with __retval, and checking that these tests started to fail. [1] https://lore.kernel.org/bpf/20230325025524.144043-1-eddyz87@gmail.com/ Fixes: 19a8e06f5f91 ("selftests/bpf: Tests execution support for test_loader.c") Reported-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/bpf/f4c4aee644425842ee6aa8edf1da68f0a8260e7c.camel@gmail.com/T/ Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230420232317.2181776-3-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-20selftests/bpf: disable program test run for progs/refcounted_kptr.cEduard Zingerman
Florian Westphal found a bug in test_loader.c processing of __retval tag. Because of this bug the function test_loader.c:do_prog_test_run() never executed and all __retval test tags were ignored. This hid an issue with progs/refcounted_kptr.c tests. When __retval tag bug is fixed and refcounted_kptr.c tests are run kernel reports various issues and eventually hangs. Shortest reproducer is the following command run a few times: $ for i in $(seq 1 4); do (./test_progs --allow=refcounted_kptr &); done Commenting out __retval tags for these tests until this issue is resolved. Reported-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/bpf/f4c4aee644425842ee6aa8edf1da68f0a8260e7c.camel@gmail.com/T/ Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230420232317.2181776-2-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-20bpftool: Replace "__fallthrough" by a comment to address merge conflictQuentin Monnet
The recent support for inline annotations in control flow graphs generated by bpftool introduced the usage of the "__fallthrough" macro in a switch/case block in btf_dumper.c. This change went through the bpf-next tree, but resulted in a merge conflict in linux-next, because this macro has been renamed "fallthrough" (no underscores) in the meantime. To address the conflict, we temporarily switch to a simple comment instead of a macro. Related: commit f7a858bffcdd ("tools: Rename __fallthrough to fallthrough") Fixes: 9fd496848b1c ("bpftool: Support inline annotations when dumping the CFG of a program") Reported-by: Sven Schnelle <svens@linux.ibm.com> Reported-by: Thomas Richter <tmricht@linux.ibm.com> Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/all/yt9dttxlwal7.fsf@linux.ibm.com/ Link: https://lore.kernel.org/bpf/20230412123636.2358949-1-tmricht@linux.ibm.com/ Link: https://lore.kernel.org/bpf/20230420003333.90901-1-quentin@isovalent.com
2023-04-20ice: sleep, don't busy-wait, in the SQ send retry loopMichal Schmidt
10 ms is a lot of time to spend busy-waiting. Sleeping is clearly allowed here, because we have just returned from ice_sq_send_cmd(), which takes a mutex. On kernels with HZ=100, this msleep may be twice as long, but I don't think it matters. I did not actually observe any retries happening here. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-20ice: remove unused buffer copy code in ice_sq_send_cmd_retry()Michal Schmidt
The 'buf_cpy'-related code in ice_sq_send_cmd_retry() looks broken. 'buf' is nowhere copied into 'buf_cpy'. The reason this does not cause problems is that all commands for which 'is_cmd_for_retry' is true go with a NULL buf. Let's remove 'buf_cpy'. Add a WARN_ON in case the assumption no longer holds in the future. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-20ice: sleep, don't busy-wait, for ICE_CTL_Q_SQ_CMD_TIMEOUTMichal Schmidt
The driver polls for ice_sq_done() with a 100 µs period for up to 1 s and it uses udelay to do that. Let's use usleep_range instead. We know sleeping is allowed here, because we're holding a mutex (cq->sq_lock). To preserve the total max waiting time, measure the timeout in jiffies. ICE_CTL_Q_SQ_CMD_TIMEOUT is used also in ice_release_res(), but there the polling period is 1 ms (i.e. 10 times longer). Since the timeout was expressed in terms of the number of loops, the total timeout in this function is 10 s. I do not know if this is intentional. This patch keeps it. The patch lowers the CPU usage of the ice-gnss-<dev_name> kernel thread on my system from ~8 % to less than 1 %. I received a report of high CPU usage with ptp4l where the busy-waiting in ice_sq_send_cmd dominated the profile. This patch has been tested in that usecase too and it made a huge improvement there. Tested-by: Brent Rowsell <browsell@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-20ice: remove ice_ctl_q_info::sq_cmd_timeoutMichal Schmidt
sq_cmd_timeout is initialized to ICE_CTL_Q_SQ_CMD_TIMEOUT and never changed, so just use the constant directly. Suggested-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-20ice: increase the GNSS data polling interval to 20 msMichal Schmidt
Double the GNSS data polling interval from 10 ms to 20 ms. According to Karol Kolacinski from the Intel team, they have been planning to make this change. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-20ice: do not busy-wait to read GNSS dataMichal Schmidt
The ice-gnss-<dev_name> kernel thread, which reads data from the u-blox GNSS module, keep a CPU core almost 100% busy. The main reason is that it busy-waits for data to become available. A simple improvement would be to replace the "mdelay(10);" in ice_gnss_read() with sleeping. A better fix is to not do any waiting directly in the function and just requeue this delayed work as needed. The advantage is that canceling the work from ice_gnss_exit() becomes immediate, rather than taking up to ~2.5 seconds (ICE_MAX_UBX_READ_TRIES * 10 ms). This lowers the CPU usage of the ice-gnss-<dev_name> thread on my system from ~90 % to ~8 %. I am not sure if the larger 0.1 s pause after inserting data into the gnss subsystem is really necessary, but I'm keeping that as it was. Of course, ideally the driver would not have to poll at all, but I don't know if the E810 can watch for GNSS data availability over the i2c bus by itself and notify the driver. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-20wifi: ath9k: Don't mark channelmap stack variable read-only in ↵Toke Høiland-Jørgensen
ath9k_mci_update_wlan_channels() This partially reverts commit e161d4b60ae3a5356e07202e0bfedb5fad82c6aa. Turns out the channelmap variable is not actually read-only, it's modified through the MCI_GPM_CLR_CHANNEL_BIT() macro further down in the function, so making it read-only causes page faults when that code is hit. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217183 Link: https://lore.kernel.org/r/20230413214118.153781-1-toke@toke.dk Fixes: e161d4b60ae3 ("wifi: ath9k: Make arrays prof_prio and channelmap static const") Cc: stable@vger.kernel.org Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-20Merge tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linuxLinus Torvalds
Pull Rust fixes from Miguel Ojeda: "Most of these are straightforward. The last one is more complex, but it only touches Rust + GCC builds which are for the moment best-effort. - Code: Missing 'extern "C"' fix. - Scripts: 'is_rust_module.sh' and 'generate_rust_analyzer.py' fixes. - A couple trivial fixes - Build: Rust + GCC build fix and 'grep' warning fix" * tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linux: rust: allow to use INIT_STACK_ALL_ZERO rust: fix regexp in scripts/is_rust_module.sh rust: build: Fix grep warning scripts: generate_rust_analyzer: Handle sub-modules with no Makefile rust: kernel: Mark rust_fmt_argument as extern "C" rust: sort uml documentation arch support table rust: str: fix requierments->requirements typo
2023-04-20Merge tag 'net-6.3-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. There are a few fixes for new code bugs, including the Mellanox one noted in the last networking pull. No known regressions outstanding. Current release - regressions: - sched: clear actions pointer in miss cookie init fail - mptcp: fix accept vs worker race - bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390 - eth: bnxt_en: fix a possible NULL pointer dereference in unload path - eth: veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag Current release - new code bugs: - eth: revert "net/mlx5: Enable management PF initialization" Previous releases - regressions: - netfilter: fix recent physdev match breakage - bpf: fix incorrect verifier pruning due to missing register precision taints - eth: virtio_net: fix overflow inside xdp_linearize_page() - eth: cxgb4: fix use after free bugs caused by circular dependency problem - eth: mlxsw: pci: fix possible crash during initialization Previous releases - always broken: - sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg - netfilter: validate catch-all set elements - bridge: don't notify FDB entries with "master dynamic" - eth: bonding: fix memory leak when changing bond type to ethernet - eth: i40e: fix accessing vsi->active_filters without holding lock Misc: - Mat is back as MPTCP co-maintainer" * tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits) net: bridge: switchdev: don't notify FDB entries with "master dynamic" Revert "net/mlx5: Enable management PF initialization" MAINTAINERS: Resume MPTCP co-maintainer role mailmap: add entries for Mat Martineau e1000e: Disable TSO on i219-LM card to increase speed bnxt_en: fix free-runnig PHC mode net: dsa: microchip: ksz8795: Correctly handle huge frame configuration bpf: Fix incorrect verifier pruning due to missing register precision taints hamradio: drop ISA_DMA_API dependency mlxsw: pci: Fix possible crash during initialization mptcp: fix accept vs worker race mptcp: stops worker on unaccepted sockets at listener close net: rpl: fix rpl header size calculation net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete() bonding: Fix memory leak when changing bond type to Ethernet veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next() bnxt_en: Fix a possible NULL pointer dereference in unload path bnxt_en: Do not initialize PTP on older P3/P4 chips netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements ...
2023-04-20Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.4. Major changes: wcn36xx * support for pronto v3 hardware ath11k * PCIe DeviceTree bindings * WCN6750: enable SAR support ath10k * convert DeviceTree bindings to YAML
2023-04-20net: libwx: fix memory leak in wx_setup_rx_resourcesZhengchao Shao
When wx_alloc_page_pool() failed in wx_setup_rx_resources(), it doesn't release DMA buffer. Add dma_free_coherent() in the error path to release the DMA buffer. Fixes: 850b971110b2 ("net: libwx: Allocate Rx and Tx resources") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230418065450.2268522-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-20Merge tag 'mt76-for-kvalo-2023-04-18' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 6.4 - fixes - connac code unification - mt7921 p2p support - mt7996 mesh a-msdu support - mt7996 eht support - mt7996 coredump support
2023-04-20wifi: rtw88: Update spelling in main.hSimon Horman
Update spelling in comments in main.h Found by inspection. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230418-rtw88-starspell-v1-1-70e52a23979b@kernel.org
2023-04-20wifi: airo: remove ISA_DMA_API dependencyArnd Bergmann
This driver does not actually use the ISA DMA API, it is purely PIO based, so remove the dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230417205131.1560074-1-arnd@kernel.org
2023-04-20wifi: rtl8xxxu: Simplify setting the initial gainBitterblue Smith
The goal of writing 0x6954341e / 0x6955341e to REG_OFDM0_XA_AGC_CORE1 appears to be setting the initial gain, which is stored in bits 0..6. Bits 7..31 are the same as what the phy init tables write. Modify only bits 0..6 so that we don't have to care about the values of the others. This way we don't have to add another "else if" for the RTL8192FU. Why we need to change the initial gain from the default 0x20 to 0x1e? Not sure. Some of the vendor drivers change it to 0x1e before scanning and then restore it to the original value after. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/cf91ca69-70e3-4c20-c0b1-e59d452356a1@gmail.com
2023-04-20wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear}Bitterblue Smith
Also add rtl8xxxu_write32_mask, rtl8xxxu_write_rfreg_mask. These helper functions make it easier to modify only parts of a register by eliminating the call to the register reading function and the bit manipulations. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/9430b841-1048-b27c-14ec-fca447dc32af@gmail.com
2023-04-20wifi: rtl8xxxu: Don't print the vendor/product/serialBitterblue Smith
Most devices have a vendor name, product name, and serial number in the efuse, but it's pretty useless. It duplicates the information already printed by the USB subsystem: usb 1-4: New USB device found, idVendor=0bda, idProduct=8178, bcdDevice= 2.00 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: 802.11n WLAN Adapter usb 1-4: Manufacturer: Realtek usb 1-4: SerialNumber: 00e04c000001 -> usb 1-4: Vendor: Realtek -> usb 1-4: Product: 802.11n WLAN Adapter usb 1-4: New USB device found, idVendor=0bda, idProduct=818b, bcdDevice= 2.00 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: 802.11n NIC usb 1-4: Manufacturer: Realtek usb 1-4: SerialNumber: 00e04c000001 -> usb 1-4: Vendor: Realtek -> usb 1-4: Product: 802.11n NIC -> usb 1-4: Serial not available. usb 1-4: New USB device found, idVendor=0bda, idProduct=f179, bcdDevice= 0.00 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: 802.11n usb 1-4: Manufacturer: Realtek usb 1-4: SerialNumber: 002E2DC0041F -> usb 1-4: Vendor: Realtek -> usb 1-4: Product: 802.11n usb 1-4: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: 802.11n NIC usb 1-4: Manufacturer: Realtek usb 1-4: SerialNumber: 00E04C0001 -> usb 1-4: Vendor: Realtek -> usb 1-4: Product: 802.11n NIC -> usb 1-4: Serial: 00E04C0001 Also, that data is not interpreted correctly in all cases: usb 3-1.1.2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 usb 3-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1.1.2: Product: 802.11n NIC usb 3-1.1.2: Manufacturer: Realtek usb 3-1.1.2: Vendor: Realtek usb 3-1.1.2: Product: \x03802.11n NI usb 3-1.1.2: Serial: \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff Link: https://bugzilla.kernel.org/show_bug.cgi?id=217231 Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/a2a7d9df-0529-7890-3522-48dce613753f@gmail.com
2023-04-20wifi: rtw88: Fix memory leak in rtw88_usbLarry Finger
Kmemleak shows the following leak arising from routine in the usb probe routine: unreferenced object 0xffff895cb29bba00 (size 512): comm "(udev-worker)", pid 534, jiffies 4294903932 (age 102751.088s) hex dump (first 32 bytes): 77 30 30 30 00 00 00 00 02 2f 2d 2b 30 00 00 00 w000...../-+0... 02 00 2a 28 00 00 00 00 ff 55 ff ff ff 00 00 00 ..*(.....U...... backtrace: [<ffffffff9265fa36>] kmalloc_trace+0x26/0x90 [<ffffffffc17eec41>] rtw_usb_probe+0x2f1/0x680 [rtw_usb] [<ffffffffc03e19fd>] usb_probe_interface+0xdd/0x2e0 [usbcore] [<ffffffff92b4f2fe>] really_probe+0x18e/0x3d0 [<ffffffff92b4f5b8>] __driver_probe_device+0x78/0x160 [<ffffffff92b4f6bf>] driver_probe_device+0x1f/0x90 [<ffffffff92b4f8df>] __driver_attach+0xbf/0x1b0 [<ffffffff92b4d350>] bus_for_each_dev+0x70/0xc0 [<ffffffff92b4e51e>] bus_add_driver+0x10e/0x210 [<ffffffff92b50935>] driver_register+0x55/0xf0 [<ffffffffc03e0708>] usb_register_driver+0x88/0x140 [usbcore] [<ffffffff92401153>] do_one_initcall+0x43/0x210 [<ffffffff9254f42a>] do_init_module+0x4a/0x200 [<ffffffff92551d1c>] __do_sys_finit_module+0xac/0x120 [<ffffffff92ee6626>] do_syscall_64+0x56/0x80 [<ffffffff9300006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The leak was verified to be real by unloading the driver, which resulted in a dangling pointer to the allocation. The allocated memory is freed in rtw_usb_intf_deinit(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230417160331.23071-1-Larry.Finger@lwfinger.net
2023-04-20wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variantSascha Hauer
We have to call rtw8821c_switch_rf_set() with SWITCH_TO_WLG or SWITCH_TO_BTG according to the chip variant as denoted in rfe_option. The information which argument to use for which variant has been taken from the vendor driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230417140358.2240429-5-s.hauer@pengutronix.de
2023-04-20wifi: rtw88: set pkg_type correctly for specific rtw8821c variantsSascha Hauer
According to the vendor driver the pkg_type has to be set to '1' for some rtw8821c variants. As the pkg_type has been hardcoded to '0', add a field for it in struct rtw_hal and set this correctly in the rtw8821c part. With this parsing of a rtw_table is influenced and check_positive() in phy.c returns true for some cases here. The same is done in the vendor driver. However, this has no visible effect on the driver here. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230417140358.2240429-4-s.hauer@pengutronix.de
2023-04-20wifi: rtw88: rtw8821c: Fix rfe_option field widthSascha Hauer
On my RTW8821CU chipset rfe_option reads as 0x22. Looking at the vendor driver suggests that the field width of rfe_option is 5 bit, so rfe_option should be masked with 0x1f. Without this the rfe_option comparisons with 2 further down the driver evaluate as false when they should really evaluate as true. The effect is that 2G channels do not work. rfe_option is also used as an array index into rtw8821c_rfe_defs[]. rtw8821c_rfe_defs[34] (0x22) was added as part of adding USB support, likely because rfe_option reads as 0x22. As this now becomes 0x2, rtw8821c_rfe_defs[34] is no longer used and can be removed. Note that this might not be the whole truth. In the vendor driver there are indeed places where the unmasked rfe_option value is used. However, the driver has several places where rfe_option is tested with the pattern if (rfe_option == 2 || rfe_option == 0x22) or if (rfe_option == 4 || rfe_option == 0x24), so that rfe_option BIT(5) has no influence on the code path taken. We therefore mask BIT(5) out from rfe_option entirely until this assumption is proved wrong by some chip variant we do not know yet. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Alexandru gagniuc <mr.nuke.me@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: ValdikSS <iam@valdikss.org.ru> Cc: stable@vger.kernel.org Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230417140358.2240429-3-s.hauer@pengutronix.de
2023-04-20wifi: rtw88: usb: fix priority queue to endpoint mappingSascha Hauer
The RTW88 chipsets have four different priority queues in hardware. For the USB type chipsets the packets destined for a specific priority queue must be sent through the endpoint corresponding to the queue. This was not fully understood when porting from the RTW88 USB out of tree driver and thus violated. This patch implements the qsel to endpoint mapping as in get_usb_bulkout_id_88xx() in the downstream driver. Without this the driver often issues "timed out to flush queue 3" warnings and often TX stalls completely. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: ValdikSS <iam@valdikss.org.ru> Tested-by: Alexandru gagniuc <mr.nuke.me@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@vger.kernel.org Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230417140358.2240429-2-s.hauer@pengutronix.de
2023-04-20wifi: rtw88: 8822c: add iface combinationPo-Hao Huang
Allow 8822c to operate two interface concurrently, only 1 AP mode plus 1 station mode under same frequency is supported. Combination of other types will not be added until requested. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121331.18062-1-pkshih@realtek.com
2023-04-20wifi: rtw88: handle station mode concurrent scan with AP modePo-Hao Huang
This patch allows vifs sharing same hardware with the AP mode vif to do scan, do note that this could lead to packet loss or disconnection of the AP's clients. Since we don't have chanctx, update scan info upon set channel so bandwidth changes won't go unnoticed and get misconfigured after scan. Download beacon just before scan starts to allow hardware to get proper content to do beaconing. Last, beacons should only be transmitted in AP's operating channel. Turn related beacon functions off while we're in other channels so the receiving stations won't get confused. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121323.18008-1-pkshih@realtek.com
2023-04-20wifi: rtw88: prevent scan abort with other VIFsPo-Hao Huang
Only abort scan with current scanning VIF. If we have more than one interface, we could call rtw_hw_scan_abort() with the wrong VIF as input. This avoids potential null pointer being accessed when actually the other VIF is scanning. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121312.17954-1-pkshih@realtek.com
2023-04-20wifi: rtw88: refine reserved page flow for AP modePo-Hao Huang
Only gather reserved pages from AP interface after it has started. Or else ieee80211_beacon_get_*() returns NULL and causes other VIFs' reserved pages fail to download. Update location of current reserved page after beacon renews so offsets changed by beacon can be recognized. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121300.17900-1-pkshih@realtek.com
2023-04-20wifi: rtw88: disallow PS during AP modePo-Hao Huang
Firmware can't support PS mode during AP mode, so disallow this case. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121135.17828-5-pkshih@realtek.com
2023-04-20wifi: rtw88: 8822c: extend reserved page numberPo-Hao Huang
Extend 8822c's reserved page number to accommodate additional required pages. Reserved page is an area of memory in the FIFO dedicated for special purposes. Previously only one interface is supported so 8 pages should suffice, extend it so we can support 2 interfaces concurrently. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121135.17828-4-pkshih@realtek.com
2023-04-20wifi: rtw88: add port switch for AP modePo-Hao Huang
Switch port settings if AP mode does not start on port 0 because of hardware limitation. For some ICs, beacons on ports other than zero could misbehave and do not issue properly, to fix this we change AP VIFs to port zero when multiple interfaces is active. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121135.17828-3-pkshih@realtek.com
2023-04-20wifi: rtw88: add bitmap for dynamic port settingsPo-Hao Huang
In order to support multiple interfaces, multiple port settings will be required. Current code always uses port 0 and should be changed. Declare a bitmap with size equal to hardware port number to record the current usage. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121135.17828-2-pkshih@realtek.com
2023-04-20wifi: rtw89: mac: use regular int as return type of DLE buffer requestPing-Ke Shih
The function to request DLE (data link engine) buffer uses 'u16' as return value that mixes error code, so change it to 'int' as regular error code. Also, treat invalid register value (0xfff) as an error. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414082228.30766-1-pkshih@realtek.com
2023-04-20wifi: mac80211: remove return value check of debugfs_create_dir()Yingsha Xu
Smatch complains that: debugfs_hw_add() warn: 'statsd' is an error pointer or valid Debugfs checks are generally not supposed to be checked for errors and it is not necessary here. Just delete the dead code. Signed-off-by: Yingsha Xu <ysxu@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230419104548.30124-1-ysxu@hust.edu.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: mvm: fix RFKILL report when driver is going downAvraham Stern
When CSME takes ownership, the driver sets RFKILL on, and this triggers driver unload and sending the confirmation SAP message. However, when IWL_MVM_MEI_REPORT_RFKILL is set, RFKILL was not reported and as a result, the driver did not confirm the ownership transition. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.29ac3cd3df73.I96b32bc274bfe1e3871e54d3fa29c7ac4f40446f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: mei: re-ask for ownership after it was taken by CSMEAvraham Stern
When the host disconnects from the AP CSME takes ownership right away. Since the driver never asks for ownership again wifi is left in rfkill until CSME releases the NIC, although in many cases the host could re-connect shortly after the disconnection. To allow the host to recover from occasional disconnection, re-ask for ownership to let the host connect again. Allow one minute before re-asking for ownership to avoid too frequent ownership transitions. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.a6c6ebc48f2d.I8a17003b86e71b3567521cc69864b9cbe9553ea9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: mei: make mei filtered scan more aggressiveAvraham Stern
When mei filtered scan is performed, it must find the AP on the first scan, otherwise CSME will take the ownership of the NIC. Make this scan more aggressive by scanning the channel the AP is supposed to be on (as reported by CSME) several times. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.47e383b10b18.I14340a118acdb19ecb7214e7ff413054c77bd99c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: modify scan request and results when in link protectionAvraham Stern
When CSME is connected and has link protection set, the driver must connect to the same AP CSME is connected to. When in link protection, modify scan request parameters to include only the channel of the AP CSME is connected to and scan for the same SSID. In addition, filter the scan results to include only results from the same AP. This will make sure the driver will connect to the same AP and will do it fast enough to keep the session alive. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.c1b55de3d704.I3895eebe18b3b672607695c887d728e113fc85ec@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: mvm: enable support for MLO APIsGregory Greenman
Enable driver's support for MLO APIs to unlock this functionality. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20230418122405.0ae0dd6f0481.Iec993cf0f28eacb2483fb9d1e755b0b2fd62e163@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: mvm: prefer RCU_INIT_POINTER()Johannes Berg
For constant values we don't need rcu_assign_pointer(), use RCU_INIT_POINTER() instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.7b400d21a27f.Iccdef9d777677390a9881c88b06c0ed13a83d978@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: mvm: fix potential memory leakJohannes Berg
If we do get multiple notifications from firmware, then we might have allocated 'notif', but don't free it. Fix that by checking for duplicates before allocation. Fixes: 4da46a06d443 ("wifi: iwlwifi: mvm: Add support for wowlan info notification") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.116758321cc4.I8bdbcbb38c89ac637eaa20dda58fa9165b25893a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: fw: fix argument to efi.get_variableAlon Giladi
We should pass the newly allocated data to fill. Signed-off-by: Alon Giladi <alon.giladi@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.aaa6d8874442.I734841c71aad9564cb22c50f2737aaff489fadaf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: mvm: fix MIC removal confusionJohannes Berg
The RADA/firmware collaborate on MIC stripping in the following way: - the firmware fills the IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK value for how many words need to be removed at the end of the frame, CRC and, if decryption was done, MIC - if the RADA is active, it will - remove that much from the end of the frame - zero the value in IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK As a consequence, the only thing the driver should need to do is to - unconditionally tell mac80211 that the MIC was removed if decryption was already done - remove as much as IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK says at the end of the frame, since either RADA did it and then the value is 0, or RADA was disabled and then the value is whatever should be removed to strip both CRC & MIC However, all this code was historically grown and getting a bit confused. Originally, we were indicating that the MIC was not stripped, which is the version of the code upstreamed in commit 780e87c29e77 ("iwlwifi: mvm: add 9000 series RX processing") which indicated RX_FLAG_DECRYPTED in iwl_mvm_rx_crypto(). We later had a commit to change that to also indicate that the MIC was stripped, adding RX_FLAG_MIC_STRIPPED. However, this was then "fixed" later to only do that conditionally on RADA being enabled, since otherwise RADA didn't strip the MIC bytes yet. At the time, we were also always including the FCS if the RADA was not enabled, so that was still broken wrt. the FCS if the RADA isn't enabled - but that's a pretty rare case. Notably though, it does happen for management frames, where we do need to remove the MIC and CRC but the RADA is disabled. Later, in commit 40a0b38d7a7f ("iwlwifi: mvm: Fix calculation of frame length"), we changed this again, upstream this was just a single commit, but internally it was split into first the correct commit and then an additional fix that reduced the number of bytes that are removed by crypt_len. Note that this is clearly wrong since crypt_len indicates the length of the PN header (always 8), not the length of the MIC (8 or 16 depending on algorithm). However, this additional fix mostly canceled the other bugs, apart from the confusion about the size of the MIC. To fix this correctly, remove all those additional workarounds. We really should always indicate to mac80211 the MIC was stripped (it cannot use it anyway if decryption was already done), and also always actually remove it and the CRC regardless of the RADA being enabled or not. That's simple though, the value indicated in the metadata is zeroed by the RADA if it's enabled and used the value, so there's no need to check if it's enabled or not. Notably then, this fixes the MIC size confusion, letting us receive GCMP-256 encrypted management frames correctly that would otherwise be reported to mac80211 8 bytes too short since the RADA is turned off for them, crypt_len is 8, but the MIC size is 16, so when we do the adjustment based on IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK (which indicates 20 bytes to remove) we remove 12 bytes but indicate then to mac80211 the MIC is still present, so mac80211 again removes the MIC of 16 bytes, for an overall removal of 28 rather than 20 bytes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.81345b6ab0cd.Ibe0348defb6cce11c99929a1f049e60b5cfc150c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: fw: fix memory leak in debugfsJohannes Berg
Fix a memory leak that occurs when reading the fw_info file all the way, since we return NULL indicating no more data, but don't free the status tracking object. Fixes: 36dfe9ac6e8b ("iwlwifi: dump api version in yaml format") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.239e501b3b8d.I4268f87809ef91209cbcd748eee0863195e70fa2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: Update support for b0 versionMukesh Sisodiya
Add support for B0 version of MAC of MR device Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.5dca1ea7a0cf.I87932e1e216a1940eeae8824071ecb777f4c034f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20net: bridge: switchdev: don't notify FDB entries with "master dynamic"Vladimir Oltean
There is a structural problem in switchdev, where the flag bits in struct switchdev_notifier_fdb_info (added_by_user, is_local etc) only represent a simplified / denatured view of what's in struct net_bridge_fdb_entry :: flags (BR_FDB_ADDED_BY_USER, BR_FDB_LOCAL etc). Each time we want to pass more information about struct net_bridge_fdb_entry :: flags to struct switchdev_notifier_fdb_info (here, BR_FDB_STATIC), we find that FDB entries were already notified to switchdev with no regard to this flag, and thus, switchdev drivers had no indication whether the notified entries were static or not. For example, this command: ip link add br0 type bridge && ip link set swp0 master br0 bridge fdb add dev swp0 00:01:02:03:04:05 master dynamic has never worked as intended with switchdev. It causes a struct net_bridge_fdb_entry to be passed to br_switchdev_fdb_notify() which has a single flag set: BR_FDB_ADDED_BY_USER. This is further passed to the switchdev notifier chain, where interested drivers have no choice but to assume this is a static (does not age) and sticky (does not migrate) FDB entry. So currently, all drivers offload it to hardware as such, as can be seen below ("offload" is set). bridge fdb get 00:01:02:03:04:05 dev swp0 master 00:01:02:03:04:05 dev swp0 offload master br0 The software FDB entry expires $ageing_time centiseconds after the kernel last sees a packet with this MAC SA, and the bridge notifies its deletion as well, so it eventually disappears from hardware too. This is a problem, because it is actually desirable to start offloading "master dynamic" FDB entries correctly - they should expire $ageing_time centiseconds after the *hardware* port last sees a packet with this MAC SA - and this is how the current incorrect behavior was discovered. With an offloaded data plane, it can be expected that software only sees exception path packets, so an otherwise active dynamic FDB entry would be aged out by software sooner than it should. With the change in place, these FDB entries are no longer offloaded: bridge fdb get 00:01:02:03:04:05 dev swp0 master 00:01:02:03:04:05 dev swp0 master br0 and this also constitutes a better way (assuming a backport to stable kernels) for user space to determine whether the kernel has the capability of doing something sane with these or not. As opposed to "master dynamic" FDB entries, on the current behavior of which no one currently depends on (which can be deduced from the lack of kselftests), Ido Schimmel explains that entries with the "extern_learn" flag (BR_FDB_ADDED_BY_EXT_LEARN) should still be notified to switchdev, since the spectrum driver listens to them (and this is kind of okay, because although they are treated identically to "static", they are expected to not age, and to roam). Fixes: 6b26b51b1d13 ("net: bridge: Add support for notifying devices about FDB add/del") Link: https://lore.kernel.org/netdev/20230327115206.jk5q5l753aoelwus@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230418155902.898627-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-19Merge branch 'Access variable length array relaxed for integer type'Alexei Starovoitov
Feng zhou says: ==================== From: Feng Zhou <zhoufeng.zf@bytedance.com> Add support for integer type of accessing variable length array. Add a selftest to check it. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 20:37:58 +0000