| Age | Commit message (Collapse) | Author |
|---|
|
We can see the following definition in kernel/locking/lockdep_internals.h:
#define STACK_TRACE_HASH_SIZE (1 << CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS)
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS is related with STACK_TRACE_HASH_SIZE
instead of MAX_STACK_TRACE_ENTRIES, fix it.
Link: https://lkml.kernel.org/r/1679380508-20830-1-git-send-email-yangtiezhu@loongson.cn
Fixes: 5dc33592e955 ("lockdep: Allow tuning tracing capacity constants.")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The path for SCHED_DEBUG is /sys/kernel/debug/sched. So, SCHED_DEBUG
should depend on DEBUG_FS, not PROC_FS.
Link: https://lkml.kernel.org/r/202301291110098787982@zte.com.cn
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
My very first kernel commit:
e4e1d47c7906 ("ALSA: ppc: remove redundant checks in PS3 driver probe")
was sent with the umlaut in my last name transcribed (Göhrs -> Goehrs).
Add a mailmap entry so all my commits use the same name.
Link: https://lkml.kernel.org/r/20230321145525.1317230-1-l.goehrs@pengutronix.de
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Eduard Zingerman says:
====================
verifier/xdp_direct_packet_access.c automatically converted to inline
assembly using [1].
This is a leftover from [2], the last patch in a batch was blocked by
mail server for being too long. This patch-set splits it in two:
- one to add migrated test to progs/
- one to remove old test from verifier/
[1] Migration tool
https://github.com/eddyz87/verifier-tests-migrator
[2] First batch of migrated verifier/*.c tests
https://lore.kernel.org/bpf/167979433109.17761.17302808621381963629.git-patchwork-notify@kernel.org/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
progs/verifier_xdp_direct_packet_access.c
Removing verifier/xdp_direct_packet_access.c.c as it was automatically converted to use
inline assembly in the previous commit. It is available in
progs/verifier_xdp_direct_packet_access.c.c.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230328020813.392560-3-eddyz87@gmail.com
|
|
Test verifier/xdp_direct_packet_access.c automatically converted to use inline assembly.
Original test would be removed in the next patch.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230328020813.392560-2-eddyz87@gmail.com
|
|
The recycle parameter used during page release is no longer
necessary: the page pool can detect when the page cannot be
recycled to the cache or ring without any outside hint.
The page pool will also take care of cleaning up after itself
once all the inflight pages have been released. So no need to
explicitly release pages to the system.
Remove the internal page_cache stats as the mlx5e_page_cache
struct no longer exists.
Delete the documentation entries along with the stats.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
To avoid overflowing the page pool's cache, don't release the
whole bulk which is usually larger than the cache refill size.
Group release+alloc instead into cache refill units that
allow releasing to the cache and then allocating from the cache.
A refill_unit variable is added as a iteration unit over the
wqe_bulk when doing release+alloc.
For a single ring, single core, default MTU (1500) TCP stream
test the number of pages allocated from the cache directly
(rx_pp_recycle_cached) increases from 0% to 52%:
+---------------------------------------------+
| Page Pool stats (/sec) | Before | After |
+-------------------------+---------+---------+
|rx_pp_alloc_fast | 2145422 | 2193802 |
|rx_pp_alloc_slow | 2 | 0 |
|rx_pp_alloc_empty | 2 | 0 |
|rx_pp_alloc_refill | 34059 | 16634 |
|rx_pp_alloc_waive | 0 | 0 |
|rx_pp_recycle_cached | 0 | 1145818 |
|rx_pp_recycle_cache_full | 0 | 0 |
|rx_pp_recycle_ring | 2179361 | 1064616 |
|rx_pp_recycle_ring_full | 121 | 0 |
+---------------------------------------------+
With this patch, the performance for legacy rq for the above test is
back to baseline.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Deferred page release was added to legacy rq but its desired effect
(driver releases last fragment to page pool cache) is not yet visible
due to the WQE bulks being too small.
This patch increases the WQE bulk size to span 512 KB and clip it to
one quarter of the rx queue size.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Don't mix xsk buffer releases with page releases anymore. This is
needed for handling of deferred page release.
Add a new bulk free function for xsk buffers from wqe frags.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, fragmented pages from the page pool can be released
in two ways:
1) In the mlx5e driver when trimming off the unused fragments AND the
associated skb fragments have been released. This path allows
recycling of pages to the page pool cache (allow_direct == true).
2) On the skb release path (last fragment release), which
will always release pages to the page pool ring
(allow_direct == false).
Whichever is releasing the last fragment will be decisive on
where the page gets released: the cache or the ring. So we
obviously want to maximize for doing the release from 1.
This patch does that by deferring the release of page fragments
right before requesting new ones from the page pool. A flag is
added to make sure that there's no release before first alloc
and that XDP_TX fragments are not released prematurely.
This is a preparation patch that doesn't unlock the performance
improvements yet. A followup patch will do that.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Change the bool flag to a bitfield as we'll use it in a downstream patch
in the series to add signaling about skipping a fragment release.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, for striding RQ, fragmented pages from the page pool can
get released in two ways:
1) In the mlx5e driver when trimming off the unused fragments AND the
associated skb fragments have been released. This path allows
recycling of pages to the page pool cache (allow_direct == true).
2) On the skb release path (last fragment release), which
will always release pages to the page pool ring
(allow_direct == false).
Whichever is releasing the last fragment will be decisive on
where the page gets released: the cache or the ring. So we
obviously want to maximize for doing the release from 1.
This patch does that by deferring the release of page fragments
right before requesting new ones from the page pool. Extra care
needs to be taken for the corner cases:
* On first call, make sure that release is not called. The
skip_release_bitmap is used for this purpose.
* On rq shutdown, make sure that all wqes that were not
in the linked list are released.
For a single ring, single core, default MTU (1500) TCP stream
test the number of pages allocated from the cache directly
(rx_pp_recycle_cached) increases from 31 % to 98 %:
+----------------------------------------------+
| Page Pool stats (/sec) | Before | After |
+-------------------------+---------+----------+
|rx_pp_alloc_fast | 2137754 | 2261033 |
|rx_pp_alloc_slow | 47 | 9 |
|rx_pp_alloc_empty | 47 | 9 |
|rx_pp_alloc_refill | 23230 | 819 |
|rx_pp_alloc_waive | 0 | 0 |
|rx_pp_recycle_cached | 672182 | 2209015 |
|rx_pp_recycle_cache_full | 1789 | 0 |
|rx_pp_recycle_ring | 1485848 | 52259 |
|rx_pp_recycle_ring_full | 3003 | 584 |
+----------------------------------------------+
With this patch, the performance in striding rq for the above test is
back to baseline.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The xdp_xmit_bitmap currently serves only one purpose: to avoid
releasing pages that are still in use due to XDP TX.
A following patch will use this bitmap in a slightly different context
but for the same purpose. So rename the bitmap to a more generic name
that reflects the purpose not the context.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Start using the page_pool skb recycling api to recycle all pages back to
the page pool and stop using atomic page reference counting.
The mlx5e driver used to manage in-flight pages using page refcounting:
for each fragment there were 2 atomic write operations happening (one
for building the skb and one on skb release).
The page_pool api introduced a method to track page fragments more
optimally:
* The page's pp_fragment_count is set to a large bias on page alloc
(1 x atomic write operation).
* The driver tracks the actual page fragments in a non atomic variable.
* When the skb is recycled, pp_fragment_count is decremented
(atomic write operation).
* When page is released in the driver, the unused number of fragments
(relative to the bias) is deducted from pp_fragment_count (atomic
write operation).
* Last page defragmentation will only be an atomic read.
So in total there are `number of fragments + 1` atomic write ops. As
opposed to previously: `2 * frags` atomic writes ops.
Pages are wrapped in a mlx5e_frag_page structure which also contains the
number of fragments. This makes it easy to count the fragments in the
driver.
This change brings performance improvements for the case when the old rx
page_cache had low recycling rates due to head of queue blocking. For a
iperf3 TCP test with a single stream, on a single core (iperf and receive
queue running on same core), the following improvements can be noticed:
* Striding rq:
- before (net-next baseline): bitrate = 30.1 Gbits/sec
- after : bitrate = 31.4 Gbits/sec (diff: 4.14 %)
* Legacy rq:
- before (net-next baseline): bitrate = 30.2 Gbits/sec
- after : bitrate = 33.0 Gbits/sec (diff: 8.48 %)
There are 2 temporary performance degradations introduced:
1) TCP streams that had a good recycling rate with the old page_cache
have a degradation for both striding and linear rq. This is due to
very low page pool cache recycling: the pages are released during skb
recycle which will release pages to the page pool ring for safety.
The following patches in this series will tackle this problem by
deferring the page release in the driver to increase the
chance of having pages recycled to the cache.
2) XDP performance is now lower (4-5 %) due to the higher number of
atomic operations used for fragment management. But this opens the
door for supporting multiple packets per page in XDP, which will
bring a big gain.
Otherwise, performance is similar to baseline.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove driver dma mapping and unmapping of pages. Let the
page_pool api do it.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This patch removes the internal rx page_cache and uses the generic
page_pool api only. It used to be that the page_pool couldn't handle all
the mlx5 driver usecases, but with the introduction of skb recycling and
page fragmentaton in the page_pool full switch can now be made. Some
benfits of this transition:
* Better page recycling in the cases when the page_cache was suffering
from head of queue blocking. The page_pool doesn't have this issue.
* DMA mapping/unmapping can be managed by the page_pool.
* mlx5e_rq size reduced by more than 50% due to the page_cache array
being deleted.
This patch only removes the page_cache. Downstream patches will enable
the required page_pool features and will add further fine-tuning.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Save allocated SHAMPO header pages to an array to which the
mlx5e_dma_info page will point to.
This change is a preparation for introducing mlx5e_frag_page structure
in a downstream patch. There's no new functionality introduced.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This change removes the usage of mlx5e_alloc_unit union for
striding rq. The change is more straightforward than legacy rq as
the alloc units union is already in place.
This patch only moves things around: instead of an array of unions make
it a union of arrays. This has the effect that each mlx5e_mpw_info will
allocate the largest possible size of the array member. For xsk this
means that the array of xdp_buff pointers for the wqe will still be
contiguous, but there will be some extra unused bytes at the end of the
array.
As further patch in the series will add the mlx5e_frag_page struct for
which the described size constraint will no longer hold.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The mlx5e_alloc_unit union is conveniently used to store arrays of
pointers to struct page or struct xdp_buff (for xsk). The union is
currently expected to have the size of a pointer for xsk batch
allocations to work. This is conveniet for the current state of the
code but makes it impossible to add a structure of a different size
to the alloc unit.
A further patch in the series will add the mlx5e_frag_page struct for
which the described size constraint will no longer hold.
This change removes the usage of mlx5e_alloc_unit union for legacy rq:
- A union of arrays is introduced (mlx5e_alloc_units) to replace the
array of unions to allow structures of different sizes.
- Each fragment has a pointer to a unit in the mlx5e_alloc_units array.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Change internal page cache and page pool api to use a struct page **
instead of a mlx5e_alloc_unit *.
This is the first change in a series which is meant to remove the
mlx5e_alloc_unit altogether.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This brings the rcu_torture_read event trace into line with the new
trace tools by replacing this event trace's __field() with the
corresponding __array().
Without this, the new trace tools will fail when presented wtih an
rcu_torture_read event trace, which is a regression from the viewpoint
of trace tools users"
Link: https://lore.kernel.org/all/20230320133650.5388a05e@gandalf.local.home/
* tag 'urgent-rcu.2023.03.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Fix rcu_torture_read ftrace event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"One single fix for sigaltstack test -Wuninitialized warning found when
building with clang"
* tag 'linux-kselftest-fixes-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: sigaltstack: fix -Wuninitialized
|
|
The lockdep_assert_held() calls added to cooling_device_stats_setup()
and cooling_device_stats_destroy() by commit 790930f44289 ("thermal:
core: Introduce thermal_cooling_device_update()") trigger false-positive
lockdep reports in code paths that are not subject to race conditions
(before cooling device registration and after cooling device removal).
For this reason, remove the lockdep_assert_held() calls from both
cooling_device_stats_setup() and cooling_device_stats_destroy() and
add one to thermal_cooling_device_stats_reinit() that has to be called
under the cdev lock.
Fixes: 790930f44289 ("thermal: core: Introduce thermal_cooling_device_update()")
Link: https://lore.kernel.org/linux-acpi/ZCIDTLFt27Ei7+V6@ideak-desk.fi.intel.com
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix an error handling issue with PTRACE_GET_LAST_BREAK request so
that -EFAULT is returned if put_user() fails, instead of ignoring it
- Fix a build race for the modules_prepare target when
CONFIG_EXPOLINE_EXTERN is enabled by reintroducing the dependence on
scripts
- Fix a memory leak in vfio_ap device driver
- Add missing earlyclobber annotations to __clear_user() inline
assembly to prevent incorrect register allocation
* tag 's390-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: fix PTRACE_GET_LAST_BREAK error handling
s390: reintroduce expoline dependence to scripts
s390/vfio-ap: fix memory leak in vfio_ap device driver
s390/uaccess: add missing earlyclobber annotations to __clear_user()
|
|
The code implicitly assumes that the list iterator finds a correct
handle. If 'vsi_handle' is not found the 'old_agg_vsi_info' was
pointing to an bogus memory location. For safety a separate list
iterator variable should be used to make the != NULL check on
'old_agg_vsi_info' correct under any circumstances.
Additionally Linus proposed to avoid any use of the list iterator
variable after the loop, in the attempt to move the list iterator
variable declaration into the macro to avoid any potential misuse after
the loop. Using it in a pointer comparison after the loop is undefined
behavior and should be omitted if possible [1].
Fixes: 37c592062b16 ("ice: remove the VSI info from previous agg")
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add profile conflict check while adding some FDIR rules to avoid
unexpected flow behavior, rules may have conflict including:
IPv4 <---> {IPv4_UDP, IPv4_TCP, IPv4_SCTP}
IPv6 <---> {IPv6_UDP, IPv6_TCP, IPv6_SCTP}
For example, when we create an FDIR rule for IPv4, this rule will work
on packets including IPv4, IPv4_UDP, IPv4_TCP and IPv4_SCTP. But if we
then create an FDIR rule for IPv4_UDP and then destroy it, the first
FDIR rule for IPv4 cannot work on pkt IPv4_UDP then.
To prevent this unexpected behavior, we add restriction in software
when creating FDIR rules by adding necessary profile conflict check.
Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The current implementation causes ice_vsi_update() to update all VSI
fields based on the cached VSI context. This also assumes that the
ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the
VSI context is not correctly synced by the driver. Fix this by only
updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID.
Also, make sure to save the updated result in the cached VSI context
on success.
Fixes: 348048e724a0 ("ice: Implement iidc operations")
Co-developed-by: Robert Malz <robertx.malz@intel.com>
Signed-off-by: Robert Malz <robertx.malz@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
make modules W=1 returns:
.../ice/ice_txrx_lib.c:448: warning: Function parameter or member 'first_idx' not described in 'ice_finalize_xdp_rx'
.../ice/ice_txrx.c:948: warning: Function parameter or member 'ntc' not described in 'ice_get_rx_buf'
.../ice/ice_txrx.c:1038: warning: Excess function parameter 'rx_buf' description in 'ice_construct_skb'
Fix these warnings by adding and deleting the deviant arguments.
Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side")
Fixes: d7956d81f150 ("ice: Pull out next_to_clean bump out of ice_put_rx_buf()")
CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There are some subtle differences between release_device() and
set_platform_dma_ops() callbacks, so separate those two callbacks. Device
links should be removed only in release_device(), because they were
created in probe_device() on purpose and they are needed for proper
Exynos IOMMU driver operation. While fixing this, remove the conditional
code as it is not really needed.
Reported-by: Jason Gunthorpe <jgg@ziepe.ca>
Fixes: 189d496b48b1 ("iommu/exynos: Add missing set_platform_dma_ops callback")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230315232514.1046589-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
By default, the tagged ingress packets to the switch from the host port
P0 get internal switch priority assigned equal to the DMA CPPI channel
number they came from, unless CPSW_P0_CONTROL_REG.RX_REMAP_VLAN is enabled.
This causes issues with applying QoS policies and mapping packets on
external port fifos, because the default configuration is vlan_aware and
DMA CPPI channels are shared between all external ports.
Hence enable CPSW_P0_CONTROL_REG.RX_REMAP_VLAN so packet will preserve
internal switch priority assigned following the VLAN(priority) tag no
matter through which DMA CPPI Channels packets enter the switch.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20230327092103.3256118-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Enable rate limiting TX DMA queues for CPSW interface by configuring the
rate in absolute Mb/s units per TX queue.
Example:
ethtool -L eth0 tx 4
echo 100 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
echo 200 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
echo 50 > /sys/class/net/eth0/queues/tx-2/tx_maxrate
echo 30 > /sys/class/net/eth0/queues/tx-3/tx_maxrate
# disable
echo 0 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20230327085758.3237155-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This fixes a similar problem to the one observed in:
commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe").
On some systems, during suspend/resume cycle firmware leaves
an interrupt enabled on a pin that is not used by the kernel.
This confuses the AMD pinctrl driver and causes spurious interrupts.
The driver already has logic to detect if a pin is used by the kernel.
Leverage it to re-initialize interrupt fields of a pin only if it's not
used by us.
Cc: stable@vger.kernel.org
Fixes: dbad75dd1f25 ("pinctrl: add AMD GPIO driver support.")
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Link: https://lore.kernel.org/r/20230320093259.845178-1-korneld@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Unless we have at least one entry queued, then don't call into
io_poll_remove_entries(). Normally this isn't possible, but if we
retry poll then we can have ->nr_entries cleared again as we're
setting it up. If this happens for a poll retry, then we'll still have
at least REQ_F_SINGLE_POLL set. io_poll_remove_entries() then thinks
it has entries to remove.
Clear REQ_F_SINGLE_POLL and REQ_F_DOUBLE_POLL unconditionally when
arming a poll request.
Fixes: c16bda37594f ("io_uring/poll: allow some retries for poll triggering spuriously")
Cc: stable@vger.kernel.org
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Juergen Gross says:
====================
xen/netback: fix issue introduced recently
The fix for XSA-423 introduced a bug which resulted in loss of network
connection in some configurations.
The first patch is fixing the issue, while the second one is removing
a test which isn't needed.
====================
Link: https://lore.kernel.org/r/20230327083646.18690-1-jgross@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The tests for the number of grant mapping or copy operations reaching
the array size of the operations buffer at the end of the main loop in
xenvif_tx_build_gops() isn't needed.
The loop can handle at maximum MAX_PENDING_REQS transfer requests, as
XEN_RING_NR_UNCONSUMED_REQUESTS() is taking unsent responses into
consideration, too.
Remove the tests.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix xenvif_get_requests() not to do grant copy operations across local
page boundaries. This requires to double the maximum number of copy
operations per queue, as each copy could now be split into 2.
Make sure that struct xenvif_tx_cb doesn't grow too large.
Cc: stable@vger.kernel.org
Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During warm reset device->fw_client is set to NULL. If a bus driver is
registered after this NULL setting and before new firmware clients are
enumerated by ISHTP, kernel panic will result in the function
ishtp_cl_bus_match(). This is because of reference to
device->fw_client->props.protocol_name.
ISH firmware after getting successfully loaded, sends a warm reset
notification to remove all clients from the bus and sets
device->fw_client to NULL. Until kernel v5.15, all enabled ISHTP kernel
module drivers were loaded right after any of the first ISHTP device was
registered, regardless of whether it was a matched or an unmatched
device. This resulted in all drivers getting registered much before the
warm reset notification from ISH.
Starting kernel v5.16, this issue got exposed after the change was
introduced to load only bus drivers for the respective matching devices.
In this scenario, cros_ec_ishtp device and cros_ec_ishtp driver are
registered after the warm reset device fw_client NULL setting.
cros_ec_ishtp driver_register() triggers the callback to
ishtp_cl_bus_match() to match ISHTP driver to the device and causes kernel
panic in guid_equal() when dereferencing fw_client NULL pointer to get
protocol_name.
Fixes: f155dfeaa4ee ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fdce ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd83 ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb880 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Cc: <stable@vger.kernel.org> # 5.16+
Signed-off-by: Tanu Malhotra <tanu.malhotra@intel.com>
Tested-by: Shaunak Saha <shaunak.saha@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
SMSC911x doesn't need mdiobus suspend/resume, that's why it sets
'mac_managed_pm'. However, setting it needs to be moved from init to
probe, so mdiobus PM functions will really never be called (e.g. when
the interface is not up yet during suspend/resume).
Fixes: 3ce9f2bef755 ("net: smsc911x: Stop and start PHY during suspend and resume")
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230327083138.6044-1-wsa+renesas@sang-engineering.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for 6.3
Usual mixed bag:
- core - output buffers
Fix return of bytes written when only some succeed.
Fix O_NONBLOCK handling to not block.
- adi,ad7791
Fix IRQ type. Not confirmed to have any impact but good to correct it anyway
- adi,adis16400
Missing CONFIG_CRC32
- capella,cm32181
Unregister 2nd I2C client if one is used.
- cio-dac
Fix bitdepth for range check on write.
- linear,ltc2497
Fix a wrong shift of the LSB introduced when switching to be24 handling.
- maxim,max11410
Fix handling of return code in read_poll_timeout()
- qcom,spmi-adc
Fix an accidental change of channel name to include the reg value from OF.
- ti,palmas
Fix a null dereference on remove due to wrong function used to get the
drvdata.
- ti,ads7950
Mark GPIO as can sleep.
* tag 'iio-fixes-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip
iio: adc: palmas_gpadc: fix NULL dereference on rmmod
iio: adc: max11410: fix read_poll_timeout() usage
iio: dac: cio-dac: Fix max DAC write value check for 12-bit
iio: light: cm32181: Unregister second I2C client if present
iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
iio: adc: ad7791: fix IRQ flags
iio: buffer: make sure O_NONBLOCK is respected
iio: buffer: correctly return bytes written in output buffers
iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
iio: adis16480: select CONFIG_CRC32
drivers: iio: adc: ltc2497: fix LSB shift
iio: adc: qcom-spmi-adc5: Fix the channel name
|
|
powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which
from my (arguably very short) checking is not commonly done for other
archs. This is fine, except when PF_IO_WORKER's have been created and
the task does something that causes a coredump to be generated. Then we
get this crash:
Kernel attempted to read user page (160) - exploit attempt? (uid: 1000)
BUG: Kernel NULL pointer dereference on read at 0x00000160
Faulting instruction address: 0xc0000000000c3a60
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries
Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod
CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0
REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8
...
NIP memcpy_power7+0x200/0x7d0
LR ppr_get+0x64/0xb0
Call Trace:
ppr_get+0x40/0xb0 (unreliable)
__regset_get+0x180/0x1f0
regset_get_alloc+0x64/0x90
elf_core_dump+0xb98/0x1b60
do_coredump+0x1c34/0x24a0
get_signal+0x71c/0x1410
do_notify_resume+0x140/0x6f0
interrupt_exit_user_prepare_main+0x29c/0x320
interrupt_exit_user_prepare+0x6c/0xa0
interrupt_return_srr_user+0x8/0x138
Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL
pt_regs.
Check for a valid pt_regs in both ppc_get/ppr_set, and return an error
if not set. The actual error value doesn't seem to be important here, so
just pick -EINVAL.
Fixes: fa439810cc1b ("powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[mpe: Trim oops in change log, add Fixes & Cc stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d9f63344-fe7c-56ae-b420-4a1a04a2ae4c@kernel.dk
|
|
Userspace PROT_NONE ptes set _PAGE_PRIVILEGED, triggering a false
positive debug assertion that __pte_flags_need_flush() is not called
on a kernel mapping.
Detect when it is a userspace PROT_NONE page by checking the required
bits of PAGE_NONE are set, and none of the RWX bits are set.
pte_protnone() is insufficient here because it always returns 0 when
CONFIG_NUMA_BALANCING=n.
Fixes: b11931e9adc1 ("powerpc/64s: add pte_needs_flush and huge_pmd_needs_flush")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230302225947.81083-1-bgray@linux.ibm.com
|
|
Arseniy Krasnov says:
====================
allocate multiple skbuffs on tx
This adds small optimization for tx path: instead of allocating single
skbuff on every call to transport, allocate multiple skbuff's until
credit space allows, thus trying to send as much as possible data without
return to af_vsock.c.
Also this patchset includes second patch which adds check and return from
'virtio_transport_get_credit()' and 'virtio_transport_put_credit()' when
these functions are called with 0 argument. This is needed, because zero
argument makes both functions to behave as no-effect, but both of them
always tries to acquire spinlock. Moreover, first patch always calls
function 'virtio_transport_put_credit()' with zero argument in case of
successful packet transmission.
====================
Link: https://lore.kernel.org/r/b0d15942-65ba-3a32-ba8d-fed64332d8f6@sberdevices.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Both of these functions have no effect when input argument is 0, so to
avoid useless spinlock access, check argument before it.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds small optimization for tx path: instead of allocating single
skbuff on every call to transport, allocate multiple skbuff's until
credit space allows, thus trying to send as much as possible data without
return to af_vsock.c.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Dario Binacchi <dario.binacchi@amarulasolutions.com> says:
The series adds support for the basic extended CAN controller (bxCAN)
found in many low- to middle-end STM32 SoCs.
The driver has been tested on the stm32f469i-discovery board with a
kernel version 5.19.0-rc2 in loopback + silent mode:
ip link set can0 type can bitrate 125000 loopback on listen-only on
ip link set up can0
candump can0 -L &
cansend can0 300#AC.AB.AD.AE.75.49.AD.D1
For uboot and kernel compilation, as well as for rootfs creation I used
buildroot:
make stm32f469_disco_sd_defconfig
make
but I had to patch can-utils and busybox as can-utils and iproute are
not compiled for MMU-less microcotrollers. In the case of can-utils,
replacing the calls to fork() with vfork(), I was able to compile the
package with working candump and cansend applications, while in the
case of iproute, I ran into more than one problem and finally I decided
to extend busybox's ip link command for CAN-type devices. I'm still
wondering if it was really necessary, but this way I was able to test
the driver.
Changes in v10: https://lore.kernel.org/all/20230328073328.3949796-1-dario.binacchi@amarulasolutions.com
- Fix errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'.
Fix the "st,can-primary" description removing the "Note:" word that
caused the failure.
- Slightly change the note text at the top of the driver module. No
functional changes.
Changes in v9: https://lore.kernel.org/all/20230327201630.3874028-1-dario.binacchi@amarulasolutions.com
- Fix commit description formatting. No semantic changes have been made.
- Replace master/slave terms with primary/secondary.
- Replace master/slave terms with primary/secondary.
- Replace master/slave terms with primary/secondary.
Changes in v8: https://lore.kernel.org/all/20230326160325.3771891-1-dario.binacchi@amarulasolutions.com
- Do not enable the clock in probe and enable/disable it in open/close.
- Return IRQ_NONE if no IRQ is active.
Changes in v7: https://lore.kernel.org/all/20230116175152.2839455-1-dario.binacchi@amarulasolutions.com
- Add Vincent Mailhol's Reviewed-by tag.
- Remove all unused macros for reading/writing the controller registers.
- Add CAN_ERR_CNT flag to notify availability of error counter.
- Move the "break" before the newline in the switch/case statements.
- Print the mnemotechnic instead of the error value in each netdev_err().
- Remove the debug print for timings parameter.
- Do not copy the data if CAN_RTR_FLAG is set in bxcan_start_xmit().
- Populate ndev->ethtool_ops with the default timestamp info.
Changes in v6: https://lore.kernel.org/all/20230109182356.141849-1-dario.binacchi@amarulasolutions.com
- move can1 node before gcan to keep ordering by address.
Changes in v5: https://lore.kernel.org/all/20221017164231.4192699-1-dario.binacchi@amarulasolutions.com
- Add Rob Herring's Acked-by tag.
- Add Rob Herring's Reviewed-by tag.
- Put static in front of bxcan_enable_filters() definition.
Changes in v4: https://lore.kernel.org/all/20220925175209.1528960-1-dario.binacchi@amarulasolutions.com
- Remove "st,stm32f4-bxcan-core" compatible. In this way the can nodes
(compatible "st,stm32f4-bxcan") are no longer children of a parent
node with compatible "st,stm32f4-bxcan-core".
- Add the "st,gcan" property (global can memory) to can nodes which
references a "syscon" node containing the shared clock and memory
addresses.
- Replace the node can@40006400 (compatible "st,stm32f4-bxcan-core")
with the gcan@40006600 node ("sysnode" compatible). The gcan node
contains clocks and memory addresses shared by the two can nodes
of which it's no longer the parent.
- Add to can nodes the "st,gcan" property (global can memory) which
references the gcan@40006600 node ("sysnode compatibble).
- Add "dt-bindings: arm: stm32: add compatible for syscon gcan node" patch.
- Drop the core driver. Thus bxcan-drv.c has been renamed to bxcan.c and
moved to the drivers/net/can folder. The drivers/net/can/bxcan directory
has therefore been removed.
- Use the regmap_*() functions to access the shared memory registers.
- Use spinlock to protect bxcan_rmw().
- Use 1 space, instead of tabs, in the macros definition.
- Drop clock ref-counting.
- Drop unused code.
- Drop the _SHIFT macros and use FIELD_GET()/FIELD_PREP() directly.
- Add BXCAN_ prefix to lec error codes.
- Add the macro BXCAN_RX_MB_NUM.
- Enable time triggered mode and use can_rx_offload().
- Use readx_poll_timeout() in function with timeouts.
- Loop from tail to head in bxcan_tx_isr().
- Check bits of tsr register instead of pkts variable in bxcan_tx_isr().
- Don't return from bxcan_handle_state_change() if skb/cf are NULL.
- Enable/disable the generation of the bus error interrupt depending
on can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING.
- Don't return from bxcan_handle_bus_err() if skb is NULL.
- Drop statistics updating from bxcan_handle_bus_err().
- Add an empty line in front of 'return IRQ_HANDLED;'
- Rename bxcan_start() to bxcan_chip_start().
- Rename bxcan_stop() to bxcan_chip_stop().
- Disable all IRQs in bxcan_chip_stop().
- Rename bxcan_close() to bxcan_ndo_stop().
- Use writel instead of bxcan_rmw() to update the dlc register.
Changes in v3: https://lore.kernel.org/all/20220828133329.793324-1-dario.binacchi@amarulasolutions.com
- Remove 'Dario Binacchi <dariobin@libero.it>' SOB.
- Add description to the parent of the two child nodes.
- Move "patterProperties:" after "properties: in top level before "required".
- Add "clocks" to the "required:" list of the child nodes.
- Remove 'Dario Binacchi <dariobin@libero.it>' SOB.
- Add "clocks" to can@0 node.
- Remove 'Dario Binacchi <dariobin@libero.it>' SOB.
- Remove a blank line.
- Remove 'Dario Binacchi <dariobin@libero.it>' SOB.
- Fix the documentation file path in the MAINTAINERS entry.
- Do not increment the "stats->rx_bytes" if the frame is remote.
- Remove pr_debug() call from bxcan_rmw().
Changes in v2: https://lore.kernel.org/all/20220820082936.686924-1-dario.binacchi@amarulasolutions.com
- Change the file name into 'st,stm32-bxcan-core.yaml'.
- Rename compatibles:
- st,stm32-bxcan-core -> st,stm32f4-bxcan-core
- st,stm32-bxcan -> st,stm32f4-bxcan
- Rename master property to st,can-master.
- Remove the status property from the example.
- Put the node child properties as required.
- Remove a blank line.
- Fix sparse errors.
- Create a MAINTAINERS entry.
- Remove the print of the registers address.
- Remove the volatile keyword from bxcan_rmw().
- Use tx ring algorithm to manage tx mailboxes.
- Use can_{get|put}_echo_skb().
- Update DT properties.
v1: https://lore.kernel.org/all/20220817143529.257908-1-dario.binacchi@amarulasolutions.com
Link: https://lore.kernel.org/all/20230328073328.3949796-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for the basic extended CAN controller (bxCAN) found in many
low- to middle-end STM32 SoCs. It supports the Basic Extended CAN
protocol versions 2.0A and B with a maximum bit rate of 1 Mbit/s.
The controller supports two channels (CAN1 as primary and CAN2 as
secondary) and the driver can enable either or both of the channels. They
share some of the required logic (e. g. clocks and filters), and that means
you cannot use the secondary CAN without enabling some hardware resources
managed by the primary CAN.
Each channel has 3 transmit mailboxes, 2 receive FIFOs with 3 stages and
28 scalable filter banks.
It also manages 4 dedicated interrupt vectors:
- transmit interrupt
- FIFO 0 receive interrupt
- FIFO 1 receive interrupt
- status change error interrupt
Driver uses all 3 available mailboxes for transmission and FIFO 0 for
reception. Rx filter rules are configured to the minimum. They accept
all messages and assign filter 0 to CAN1 and filter 14 to CAN2 in
identifier mask mode with 32 bits width. It enables and uses transmit,
receive buffers for FIFO 0 and error and status change interrupts.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230328073328.3949796-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add pin configurations for using CAN controller on stm32f469-disco
board. They are located on the Arduino compatible connector CN5 (CAN1)
and on the extension connector CN12 (CAN2).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230328073328.3949796-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for bxcan (Basic eXtended CAN controller) to STM32F429. The
chip contains two CAN peripherals, CAN1 the primary and CAN2 the secondary,
that share some of the required logic like clock and filters. This means
that the secondary CAN can't be used without the primary CAN.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230328073328.3949796-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add documentation of device tree bindings for the STM32 basic extended
CAN (bxcan) controller.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20230328073328.3949796-3-dario.binacchi@amarulasolutions.com
[mkl: drop unneeded quotes]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
