summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-08[media] rtl2830: __udivdi3 undefinedGianluca Gennari
Il 29/02/2012 22:30, Geert Uytterhoeven ha scritto: > http://kisskb.ellerman.id.au/kisskb/buildresult/5759200/ ERROR: > "__udivdi3" [drivers/media/dvb/frontends/rtl2830.ko] undefined! > The following patch fixed the warning on my 32 bit system. Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-08x86: Include probe_roms.h in probe_roms.cJan Beulich
... to ensure that declarations and definitions are in sync. Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/4F5888F902000078000770F1@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-08x86/32: Print control and debug registers for kerenel contextJan Beulich
While for a user mode register dump it may be reasonable to skip those (albeit x86-64 doesn't do so), for kernel mode dumps these should be printed to make sure all information possibly necessary for analysis is available. Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/4F58889202000078000770E7@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-08x86: Tighten dependencies of CPU_SUP_*_32Jan Beulich
Building in support for either of these CPUs is pointless when e.g. M686 was selected (since such a kernel would use cmov instructions, which aren't available on these older CPUs). Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/4F58875A02000078000770E0@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-08drm/radeon/kms: fix hdmi duallink checksAlex Deucher
All pre-SI chips are limited to 165 Mhz for single link. Code in question will be re-enabled when SI support is added. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44755 https://bugzilla.kernel.org/show_bug.cgi?id=42887 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-08drm/radeon/kms: set SX_MISC in the r6xx blit code (v2)Marek Olšák
Mesa may set it to 1, causing all primitives to be killed. v2: also update the r7xx code Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-08net/usbnet: avoid recursive locking in usbnet_stop()Sebastian Siewior
|kernel BUG at kernel/rtmutex.c:724! |[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4) |[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194) |[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) |[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40) |[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) |[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) |[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) |[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc) |[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) |[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) |[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) |[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c) |[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Cc: stable@kernel.org Reported-by: Aníbal Almeida Pinto <anibal.pinto@efacec.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08route: Remove redirect_genidSteffen Klassert
As we invalidate the inetpeer tree along with the routing cache now, we don't need a genid to reset the redirect handling when the routing cache is flushed. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08inetpeer: Invalidate the inetpeer tree along with the routing cacheSteffen Klassert
We initialize the routing metrics with the values cached on the inetpeer in rt_init_metrics(). So if we have the metrics cached on the inetpeer, we ignore the user configured fib_metrics. To fix this issue, we replace the old tree with a fresh initialized inet_peer_base. The old tree is removed later with a delayed work queue. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08enic: Fix addr valid check in enic_set_vf_macRoopa Prabhu
zero mac address is a valid address for VIC dynamic vnic and sriov Vf's. Fix the check in enic_set_vf_mac appropriately Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08mlx4_core: fix bug in modify_cq wrapper for resize flow.Jack Morgenstein
The actual FW command is called in procedure "handle_resize". Code incorrectly invoked the FW command again (in good flow), in the modify_cq wrapper function. Fix by skipping second FW invocation unconditionally for resize. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08atl1c: set ATL1C_WORK_EVENT_RESET bit correctlyDan Carpenter
ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The intent was to set the zero bit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08bridge: fix state reporting when port is disabledPaulius Zaleckas
Now we have: eth0: link *down* br0: port 1(eth0) entered *forwarding* state br_log_state(p) should be called *after* p->state is set to BR_STATE_DISABLED. Reported-by: Zilvinas Valinskas <zilvinas@wilibox.com> Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08bridge: br_log_state() s/entering/entered/Paulius Zaleckas
When br_log_state() is reporting state it should say "entered" istead of "entering" since state at this point is already changed. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08ehea: restore multicast and rx_errors fieldsEric Dumazet
Commit 239c562c94d (ehea: Add 64bit statistics) added a regression, since we no longer report multicast & rx_errors fields, taken from port->stats structure. These fields are updated in ehea_update_stats() every second. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
2012-03-07lcs: Return zero from ccwgroup devs set_offline functionKlaus-Dieter Wacker
A return code of non-zero of the devs ccwgroup set_offline function leaves the dev in online state. Having done a partly offlining may leave the dev in unusable state. To make sure the dev is set to offline, zero is returned. A setup trace entry is written in case the offlining steps encountered some trouble. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07qeth: meaningful return code for set_mac_addressUrsula Braun
Setting an invalid mac-address for a qeth layer2 device returns with a strange error code: # ip link set hsi1 address 00:00:00:00:00:01 RTNETLINK answers: Unknown error 18446744073709486085 Problem is caused by wrong usage of the return_code field within structure qeth_ipa_cmd. With this patch the ip command above returns SIOCSIFHWADDR: Invalid argument Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07ctcm: use correct idal word list for ctcmpcBelinda Thompson
Communication Server Linux uses the ctcmpc code of the ctcm driver. Sending problems have shown up caused by a wrong idal word list for the first ccw. Function ctcmpc_chx_txdone() invokes the function to prepare the idal word list without setting an appropriate length for the first ccw, which may lead to an incomplete idal word list. This patch sets the maximum buffer size as data length of the first ccw. Thus correct idal word lists are guaranteed in all cases. Signed-off-by: Belinda Thompson <belindat@us.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07ctcm: make ctcmpc debugging compilableUrsula Braun
ctcmpc debugging can be activated defining constant DEBUGCCW. The debugging part contains wrong checks for 64 bit addresses. Thus the debugging version does not compile. This patch corrects the 64-bit address checks to make it compilable. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Belinda Thompson <belindat@us.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07qeth: synchronize discipline module loadingFrank Blaschka
During system startup udev may try to configure devices in parallel so we have to synchronize discipline module loading. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07af_iucv: add shutdown for HS transportUrsula Braun
AF_IUCV sockets offer a shutdown function. This patch makes sure shutdown works for HS transport as well. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07af_iucv: handle netdev eventsUrsula Braun
In case of transport through HiperSockets the underlying network interface may switch to DOWN state or the underlying network device may recover. In both cases the socket must change to IUCV_DISCONN state. If the interface goes down, af_iucv has a chance to notify its connection peer in addition. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07Merge branch 'fixes' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
2012-03-07Merge branch 'master' of git://1984.lsi.us.es/net-nextDavid S. Miller
2012-03-08Bluetooth: Set security level on incoming pairing requestIdo Yariv
If a master would like to raise the security level, it will send a pairing request. While the pending security level is set on an incoming security request (from a slave), it is not set on a pairing request. As a result, the security level would not be raised on the slave in such case. Fix this by setting the pending security when receiving pairing requests according to the requested authorization. Signed-off-by: Ido Yariv <ido@wizery.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-08Bluetooth: Fix access to the STK generation methods matrixIdo Yariv
The major index of the table is actually the remote I/O capabilities, not the local ones. As a result, devices with different I/O capabilities could have used wrong or even unsupported generation methods. Signed-off-by: Ido Yariv <ido@wizery.com> CC: Brian Gix <bgix@codeaurora.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-08Bluetooth: Fix using uninitialized variableLuiz Augusto von Dentz
+ src/net/bluetooth/rfcomm/tty.c: warning: 'p' is used uninitialized in this function: => 218 + src/net/bluetooth/rfcomm/tty.c: warning: 'p' may be used uninitialized in this function: => 218 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-08Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012.Eran
The bluetooth module in the Asus UX31/UX21 is based on Atheros AR3012 and requires a firmware to be uploaded before it's usable. output of usb-devices for this module: T: Bus=01 Lev=02 Prnt=02 Port=07 Cnt=03 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3375 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Eran <eran@over-here.org> Tested-by: Michal Labedzki <michal.labedzki@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-08Bluetooth: fix conding style issues all over the treeGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-07PCI: ignore pre-1.1 ASPM quirking when ASPM is disabledMatthew Garrett
Right now we won't touch ASPM state if ASPM is disabled, except in the case where we find a device that appears to be too old to reliably support ASPM. Right now we'll clear it in that case, which is almost certainly the wrong thing to do. The easiest way around this is just to disable the blacklisting when ASPM is disabled. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-03-07ARM: OMAP2+: Fix section warnings for hsmmc_init_oneTony Lindgren
Otherwise we can get the following error depending on the compiler: WARNING: arch/arm/mach-omap2/built-in.o(.text+0xafe0): Section mismatch in reference from the function omap_hsmmc_init_one() to the function .init.text:omap_hsmmc_pdata_init() The function omap_hsmmc_init_one() references the function __init omap_hsmmc_pdata_init(). This is often because omap_hsmmc_init_one lacks a __init annotation or the annotation of omap_hsmmc_pdata_init is wrong. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-07staging: android: ram_console: drop verbose ram_console supportColin Cross
Equivalent functionality can be obtained with loglevel=15 CC: Android Kernel Team <kernel-team@android.com> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-07staging: android: ram_console: drop early buffer supportColin Cross
Early ramconsole is not very useful, an early crash will prevent getting the logged data out on the next boot, and CONFIG_DEBUG_LL=y will get the same information. Drop it to simplify a future refactoring. CC: Android Kernel Team <kernel-team@android.com> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-07staging: android: ram_console: move footer stringsColin Cross
Don't store the bootinfo string and the ecc status string with the recovered old log data. This will simplify refactoring the persistent ram code out of the ram console code later. CC: Android Kernel Team <kernel-team@android.com> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-07staging: android: ram_console: set CON_ANYTIME console flagDima Zavin
We want to ensure that we get all the console messages, even ones that occur while the printing CPU is not yet online. [jstultz: tweaked commit subject line] CC: Android Kernel Team <kernel-team@android.com> Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-07spi: create a message queueing infrastructureLinus Walleij
This rips the message queue in the PL022 driver out and pushes it into (optional) common infrastructure. Drivers that want to use the message pumping thread will need to define the new per-messags transfer methods and leave the deprecated transfer() method as NULL. Most of the design is described in the documentation changes that are included in this patch. Since there is a queue that need to be stopped when the system is suspending/resuming, two new calls are implemented for the device drivers to call in their suspend()/resume() functions: spi_master_suspend() and spi_master_resume(). ChangeLog v1->v2: - Remove Kconfig entry and do not make the queue support optional at all, instead be more agressive and have it as part of the compulsory infrastructure. - If the .transfer() method is implemented, delete print a small deprecation notice and do not start the transfer pump. - Fix a bitrotted comment. ChangeLog v2->v3: - Fix up a problematic sequence courtesy of Chris Blair. - Stop rather than destroy the queue on suspend() courtesy of Chris Blair. Signed-off-by: Chris Blair <chris.blair@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-07spi: add support for Renesas RSPIShimoda, Yoshihiro
The SH7757 has RSPI module. This patch supports it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-07spi/spi-sh: add IORESOURCE_MEM_TYPE_MASK decoding for access sizeShimoda, Yoshihiro
This SPI controller's access size is 32, or 8-bit. The previous driver supported 32-bit only. So, this patch adds IORESOURCE_MEM_TYPE_MASK decoding, an then, the driver can handle the SPI controller of 8-bit. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-07ARM: OMAP2+: Fix build issues with missing include of linux/bug.hTony Lindgren
Otherwise we can get the following if bug.h is not included from kernel.h: arch/arm/mach-omap2/powerdomain-common.c: In function 'omap2_pwrdm_get_mem_bank_onstate_mask': arch/arm/mach-omap2/powerdomain-common.c:64:3: error: implicit declaration of function 'WARN_ON' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-07Merge tag 'rpmsg-fixes-and-more-for-3.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc into next/rpmsg Fixing and cleaning up several remoteproc and rpmsg issues. In addition, remoteproc's resource table is converted to a collection of type-value members, instead of a rigid array of homogeneous structs. This enables remoteproc to support registration of generic virtio devices, and not only a single VIRTIO_ID_RPMSG virtio device. But perhaps more importantly, the resource table overhaul makes it possible to easily extend it in the future without breaking older images (simply by defining a new member type, while continuing to support older types). * tag 'rpmsg-fixes-and-more-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc: cleanup resource table parsing paths remoteproc: remove the hardcoded vring alignment remoteproc/omap: remove the mbox_callback limitation remoteproc: remove the single rpmsg vdev limitation remoteproc: safer boot/shutdown order remoteproc: remoteproc_rpmsg -> remoteproc_virtio remoteproc: resource table overhaul rpmsg: fix build warning when dma_addr_t is 64-bit rpmsg: fix published buffer length in rpmsg_recv_done rpmsg: validate incoming message length before propagating rpmsg: fix name service endpoint leak remoteproc/omap: two Kconfig fixes remoteproc: make sure we're parsing a 32bit firmware
2012-03-07RDMA/iwcm: Reject connect requests if cmid is not in LISTEN stateSteve Wise
When destroying a listening cmid, the iwcm first marks the state of the cmid as DESTROYING, then releases the lock and calls into the iWARP provider to destroy the endpoint. Since the cmid is not locked, its possible for the iWARP provider to pass a connection request event to the iwcm, which will be silently dropped by the iwcm. This causes the iWARP provider to never free up the resources from this connection because the assumption is the iwcm will accept or reject this connection. The solution is to reject these connection requests. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-03-07RDMA/cxgb3: Don't pass irq flags to flush_qp()Steve Wise
Since flush_qp() is always called with irqs disabled, all the locking inside flush_qp() and __flush_qp() doesn't need irq save/restore. Further, passing the flag variable from iwch_modify_qp() is just wrong and causes a WARN_ON() in local_bh_enable(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-03-07Merge branch 'fixes-non-critical-part2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical * 'fixes-non-critical-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3+: PM: VP: fix integer truncation error ARM: OMAP2+: PM: fix wakeupgen warning when hotplug disabled ARM: OMAP2+: PM: fix section mismatch with omap2_init_processor_devices() ARM: OMAP2: Fix section warning for n8x0 when CONFIG_MMC_OMAP is not set ARM: OMAP2+: Fix omap24xx_io_desc warning if SoC subtypes are not selected ARM: OMAP1: Fix section mismatch for omap1_init_early() ARM: OMAP1: Fix typo in lcd_dma.c ARM: OMAP: mailbox: trivial whitespace fix ARM: OMAP: Remove definition cpu_is_omap4430() ARM: OMAP2+: included some headers twice ARM: OMAP: clock.c: included linux/debugfs.h twice ARM: OMAP: don't build hwspinlock in vain ARM: OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided ARM: omap: pandora: fix usbhs platform data ARM: OMAP: sram: Add am33xx SRAM support (minimal) ARM: OMAP2+: id: Add am33xx SoC type detection ARM: OMAP2+: GPMC: Export gpmc_enable_hwecc and gpmc_calculate_ecc ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support
2012-03-07MAINTAINERS: ARM: tegra: update Stephen's email addressStephen Warren
My nvidia.com address is hosted by MS Exchange Server and isn't suitable for receiving patches. Update my MAINTAINERS entry to something that is. Note: The old address continues to work, I just want to ensure that I receive patches at the new one where possible. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-07Merge branch 'maintainers' of ↵Olof Johansson
git://gitorious.org/linux-davinci/linux-davinci into next/maintainers * 'maintainers' of git://gitorious.org/linux-davinci/linux-davinci: (2 commits) MAINTAINERS: add TI DaVinci git tree information MAINTAINERS: mark TI DaVinci list as "moderated" (also included an update to 3.3-rc6) Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-07Merge branch 'next/cleanup-use-static' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup * 'next/cleanup-use-static' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: use static declaration when it is not used in other files ARM: S5PV210: use static declaration when it is not used in other files ARM: S5PC100: use static declaration when it is not used in other files ARM: S5P64X0: use static declaration when it is not used in other files ARM: S3C64XX: use static declaration when it is not used in other files ARM: S3C24XX: use static declaration when it is not used in other files ARM: EXYNOS: use static declaration when it is not used in other files
2012-03-07arm/tegra: add timeout to PCIe PLL lock detection loopDmitry Artamonow
Tegra PCIe driver waits for PLL to lock using busy loop. If PLL fails to lock for some reason, this leads to silent lockup while booting (as PCIe code is not modular). Fix by adding timeout, so if PLL doesn't lock in a couple of seconds, just PCIe driver fails and machine continues to boot. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-07arm/tegra: fix harmony pinmux for PCIeDmitry Artamonow
Commit 6e96aca397 (arm/tegra: Harmony PCIe: Don't touch pinmux) removed runtime tri-state toggling for PCIe related pinmux groups, but it seems that the fact that all of them are tri-state by default has been overlooked. Change defaults for these groups to TEGRA_TRI_NORMAL. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-07ARM: tegra: update defconfigStephen Warren
Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit (git 2.34.1) at 2025-10-02 20:56:30 +0000