| Age | Commit message (Collapse) | Author |
|---|
|
The hwstats debugfs files are only writeable, but they are created with
read and write permissions, causing certain selftests to fail [1].
Fix by creating the files with write permission only.
[1]
# ./test_offload.py
Test destruction of generic XDP...
Traceback (most recent call last):
File "/home/idosch/code/linux/tools/testing/selftests/bpf/./test_offload.py", line 810, in <module>
simdev = NetdevSimDev()
[...]
Exception: Command failed: cat /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex
cat: /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex: Invalid argument
Fixes: 1a6d7ae7d63c ("netdevsim: Introduce support for L3 offload xstats")
Reported-by: Jie2x Zhou <jie2x.zhou@intel.com>
Tested-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220909153830.3732504-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While converting max_tx_rate from bytes to Mbps, this value was set to 0,
if the original value was lower than 125000 bytes (1 Mbps). This would
cause no transmission rate limiting to occur. This happened due to lack of
check of max_tx_rate against the 1 Mbps value for max_tx_rate and the
following division by 125000. Fix this issue by adding a helper
i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of
50 Mbps, if its value is less than 1 Mbps, otherwise do the required
conversion by dividing by 125000.
Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Max MTU sent to VF is set to 0 during memory allocation. It cause
that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not
depend on data from HW.
Set max_mtu field in virtchnl_vf_resource struct to inform
VF in GET_VF_RESOURCES msg what size should be max frame.
Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After setting port VLAN and MTU to 9000 on VF with ice driver there
was an iavf error
"PF returned error -5 (IAVF_ERR_PARAM) to our request 6".
During queue configuration, VF's max packet size was set to
IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN
due to making some space for port VLAN as VF is not aware whether it's
in a port VLAN. This mismatch in sizes caused ice to reject queue
configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF
to VF with GET_VF_RESOURCES msg but VF does not look at this.
In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu
received from pf with GET_VF_RESOURCES msg to make vf's
max_frame_size dependent from pf. Add check if received max_mtu is
not in eligible range then set it to IAVF_MAX_RXBUFFER.
Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The MDIO gateway (GW) lock in BlueField-2 GIGE logic is
set after read. This patch adds logic to make sure the
lock is always cleared at the end of each MDIO transaction.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20220902164247.19862-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix bad page state, free inappropriate page in handling dummy
descriptor. iavf_build_skb now has to check not only if rx_buffer is
NULL but also if size is zero, same thing in iavf_clean_rx_irq.
Without this patch driver would free page that will be used
by napi_build_skb.
Fixes: a9f49e006030 ("iavf: Fix handling of dummy receive descriptors")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use READ_ONCE_NOCHECK() when reading the stack to prevent KASAN splats
when dump_stack() is used.
Fixes: 5b301409e8bc5d7fad ("UML: add support for KASAN under x86_64")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
OpenWrt's UML with 5.15 was producing odd errors/warnings during preinit
part of the early userspace portion:
|[ 0.000000] Kernel command line: ubd0=root.img root=98:0 console=tty
|[...]
|[ 0.440000] random: jshn: uninitialized urandom read (4 bytes read)
|[ 0.460000] random: jshn: uninitialized urandom read (4 bytes read)
|/etc/preinit: line 47: can't create /dev/tty: No such device or address
|/etc/preinit: line 48: can't create /dev/tty: No such device or address
|/etc/preinit: line 58: can't open /dev/tty: No such device or address
|[...] repeated many times
That "/dev/tty" came from the command line (which is automatically
added if no console= parameter was specified for the uml binary).
The TLDP project tells the following about the /dev/tty:
<https://tldp.org/HOWTO/Text-Terminal-HOWTO-7.html#ss7.3>
| /dev/tty stands for the controlling terminal (if any) for the current
| process.[...]
| /dev/tty is something like a link to the actually terminal device[..]
The "(if any)" is important here, since it's possible for processes to
not have a controlling terminal.
I think this was a simple typo and the author wanted tty0 there.
CC: Thomas Meyer <thomas@m3y3r.de>
Fixes: d7ffac33631b ("um: stdio_console: Make preferred console")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
arch.tls_array is statically allocated so checking for NULL doesn't
make sense. This causes the compiler warning below.
Remove the checks to silence these warnings.
../arch/x86/um/tls_32.c: In function 'get_free_idx':
../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
68 | if (!t->arch.tls_array)
| ^
In file included from ../arch/x86/um/asm/processor.h:10,
from ../include/linux/rcupdate.h:30,
from ../include/linux/rculist.h:11,
from ../include/linux/pid.h:5,
from ../include/linux/sched.h:14,
from ../arch/x86/um/tls_32.c:7:
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
| ^~~~~~~~~
../arch/x86/um/tls_32.c: In function 'get_tls_entry':
../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
243 | if (!t->arch.tls_array)
| ^
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
| ^~~~~~~~~
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Like in f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9
"um: Cleanup syscall_handler_t definition/cast, fix warning",
remove the cast to to fix the compiler warning.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
commit 0060c8783330 ("net: stmmac: implement support for passive mode
converters via dt") has changed the plat->interface field semantics from
containing the PHY-mode to specifying the MAC-PCS interface mode. Due to
that the loongson32 platform code will leave the phylink interface
uninitialized with the PHY-mode intended by the means of the actual
platform setup. The commit-author most likely has just missed the
arch-specific code to fix. Let's mend the Loongson32 platform code then by
assigning the PHY-mode to the phy_interface field of the STMMAC platform
data.
Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The lantiq WDT driver uses clk_get_io(), which is not exported,
so export it to fix a build error:
ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined!
Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
During the code change to add the support for devres-managed card
instance, we put an explicit kfree(card) call at the error path in
snd_card_new(). This is needed for the early error path before the
card is initialized with the device, but is rather superfluous and
causes a double-free at the error path after the card instance is
initialized, as the destructor of the card object already contains a
kfree() call.
This patch fixes the double-free situation by removing the superfluous
kfree(). Meanwhile we need to call kfree() explicitly for the early
error path, so it's added there instead.
Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation")
Reported-by: Rondreis <linhaoguo86@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAB7eexL1zBnB636hwS27d-LdPYZ_R1-5fJS_h=ZbCWYU=UPWJg@mail.gmail.com
Link: https://lore.kernel.org/r/20220919123516.28222-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Similair to the HP OMEN 15, the HP OMEN 16 also needs
ALC285_FIXUP_HP_MUTE_LED for the mute LED to work.
[ Rearranged the entry in PCI SSID order by tiwai ]
Signed-off-by: Daniel Houldsworth <dhould3@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220918171300.24693-1-dhould3@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Some small parisc architecture fixes for 6.0-rc6:
One patch lightens up a previous commit and thus unbreaks building the
debian kernel, which tries to configure a 64-bit kernel with the
ARCH=parisc environment variable set.
The other patches fixes asm/errno.h includes in the tools directory
and cleans up memory allocation in the iosapic driver.
Summary:
- Allow configuring 64-bit kernel with ARCH=parisc
- Fix asm/errno.h includes in tools directory for parisc and xtensa
- Clean up iosapic memory allocation
- Minor typo and spelling fixes"
* tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Allow CONFIG_64BIT with ARCH=parisc
parisc: remove obsolete manual allocation aligning in iosapic
tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa
Input: hp_sdc: fix spelling typo in comment
parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
|
|
Pull io_uring fixes from Jens Axboe:
"Nothing really major here, but figured it'd be nicer to just get these
flushed out for -rc6 so that the 6.1 branch will have them as well.
That'll make our lives easier going forward in terms of development,
and avoid trivial conflicts in this area.
- Simple trace rename so that the returned opcode name is consistent
with the enum definition (Stefan)
- Send zc rsrc request vs notification lifetime fix (Pavel)"
* tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linux:
io_uring/opdef: rename SENDZC_NOTIF to SEND_ZC
io_uring/net: fix zc fixed buf lifetime
|
|
It's confusing to see the string SENDZC_NOTIF in ftrace output
when using IORING_OP_SEND_ZC.
Fixes: b48c312be05e8 ("io_uring/net: simplify zerocopy send user API")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: io-uring@vger.kernel.org
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8e5cd8616919c92b6c3c7b6ea419fdffd5b97f3c.1663363798.git.metze@samba.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Notifications usually outlive requests, so we need to pin buffers with
it by assigning a rsrc to it instead of the request.
Fixed: b48c312be05e8 ("io_uring/net: simplify zerocopy send user API")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/dd6406ff8a90887f2b36ed6205dac9fda17c1f35.1663366886.git.asml.silence@gmail.com
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the level-low interrupt type support in gpio-mpc8xxx
- convert another two drivers to using immutable irq chips
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mt7621: Make the irqchip immutable
gpio: ixp4xx: Make irqchip immutable
MAINTAINERS: Update HiSilicon GPIO Driver maintainer
gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
|
|
Prevent tcp_read_skb() from flooding the syslog.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.
If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Nothing special, just driver fixes:
- Fix IRQ wakeup and pins for UFS and SDC2 issues on the Qualcomm
SC8180x
- Fix the Rockchip driver to support interrupt on both rising and
falling edges.
- Name the Allwinner A100 R_PIO properly
- Fix several issues with the Ocelot interrupts"
* tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: Fix interrupt controller
pinctrl: sunxi: Fix name for A100 R_PIO
pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH
pinctrl: qcom: sc8180x: Fix wrong pin numbers
pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map
|
|
Pull block fixes from Jens Axboe:
"Two fixes for -rc6:
- Fix a mixup of sectors and bytes in the secure erase ioctl
(Mikulas)
- Fix for a bad return value for a non-blocking bio/blk queue enter
call (me)"
* tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
blk-lib: fix blkdev_issue_secure_erase
block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait
|
|
Pull io_uring fixes from Jens Axboe:
"Two small patches:
- Fix using an unsigned type for the return value, introduced in this
release (Pavel)
- Stable fix for a missing check for a fixed file on put (me)"
* tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
io_uring/msg_ring: check file type before putting
io_uring/rw: fix error'ed retry return values
|
|
Pull drm fixes from Dave Airlie:
"This is the regular drm fixes pull.
The i915 and misc fixes are fairly regular, but the amdgpu contains
fixes for new hw blocks, the dcn314 specific path hookups and also has
a bunch of fixes for clang stack size warnings which are a bit churny
but fairly straightforward. This means it looks a little larger than
usual.
amdgpu:
- BACO fixes for some RDNA2 boards
- PCI AER fixes uncovered by a core PCI change
- Properly hook up dirtyfb helper
- RAS fixes for GC 11.x
- TMR fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- LLVM DML stack size fixes
i915:
- Revert a display patch around max DP source rate now that the
proper WaEdpLinkRateDataReload is in place
- Fix perf limit reasons bit position
- Fix unclaimmed mmio registers on suspend flow with GuC
- A vma_move_to_active fix for a regression with video decoding
- DP DSP fix
gma500:
- Locking and IRQ fixes
meson:
- OSD1 display fixes
panel-edp:
- Fix Innolux timings
rockchip:
- DP/HDMI fixes"
* tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/amdgpu: make sure to init common IP before gmc
drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega
drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega
drm/rockchip: Fix return type of cdn_dp_connector_mode_valid
drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usage
drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()
drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()
drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport()
drm/amd/display: Refactor SubVP calculation to remove FPU
drm/amd/display: Limit user regamma to a valid value
drm/amd/display: add workaround for subvp cursor corruption for DCN32/321
drm/amd/display: SW cursor fallback for SubVP
drm/amd/display: Round cursor width up for MALL allocation
drm/amd/display: Correct dram channel width for dcn314
drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314
drm/amd/display: Hook up DCN314 specific dml implementation
drm/amd/display: Enable dlg and vba compilation for dcn314
drm/amd/display: Fix compilation errors on DCN314
drm/amd/display: Fix divide by zero in DML
...
|
|
Pull cifs fixes from Steve French:
"Four smb3 fixes for stable:
- important fix to revalidate mapping when doing direct writes
- missing spinlock
- two fixes to socket handling
- trivial change to update internal version number for cifs.ko"
* tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: add missing spinlock around tcon refcount
cifs: always initialize struct msghdr smb_msg completely
cifs: don't send down the destination address to sendmsg for a SOCK_STREAM
cifs: revalidate mapping when doing direct writes
|
|
From: Benjamin Poirier <bpoirier@nvidia.com>
To: netdev@vger.kernel.org
Cc: Jay Vosburgh <j.vosburgh@gmail.com>,
Veaceslav Falico <vfalico@gmail.com>,
Andy Gospodarek <andy@greyhouse.net>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Jiri Pirko <jiri@resnulli.us>, Shuah Khan <shuah@kernel.org>,
Jonathan Toppins <jtoppins@redhat.com>,
linux-kselftest@vger.kernel.org
Subject: [PATCH net v3 0/4] Unsync addresses from ports when stopping aggregated devices
Date: Wed, 7 Sep 2022 16:56:38 +0900 [thread overview]
Message-ID: <20220907075642.475236-1-bpoirier@nvidia.com> (raw)
This series fixes similar problems in the bonding and team drivers.
Because of missing dev_{uc,mc}_unsync() calls, addresses added to
underlying devices may be leftover after the aggregated device is deleted.
Add the missing calls and a few related tests.
v2:
* fix selftest installation, see patch 3
v3:
* Split lacpdu_multicast changes to their own patch, #1
* In ndo_{add,del}_slave methods, only perform address list changes when
the aggregated device is up (patches 2 & 3)
* Add selftest function related to the above change (patch 4)
====================
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test that the bonding and team drivers clean up an underlying device's
address lists (dev->uc, dev->mc) when the aggregated device is deleted.
Test addition and removal of the LACPDU multicast address on underlying
devices by the bonding driver.
v2:
* add lag_lib.sh to TEST_FILES
v3:
* extend bond_listen_lacpdu_multicast test to init_state up and down cases
* remove some superfluous shell syntax and 'set dev ... up' commands
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former team
ports after a team device has been deleted; see test_LAG_cleanup() in the
last patch in this series.
Add unsync calls at their expected location, team_close().
v3:
* When adding or deleting a port, only sync/unsync addresses if the team
device is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former bond
slaves after a bond has been deleted; see test_LAG_cleanup() in the last
patch in this series.
Add unsync calls, via bond_hw_addr_flush(), at their expected location,
bond_close().
Add dev_mc_add() call to bond_open() to match the above change.
v3:
* When adding or deleting a slave, only sync/unsync, add/del addresses if
the bond is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same constant data so define one common instance for all
bonding code.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-08 (ice, iavf)
This series contains updates to ice and iavf drivers.
Dave removes extra unplug of auxiliary bus on reset which caused a
scheduling while atomic to be reported for ice.
Ding Hui defers setting of queues for TCs to ensure valid configuration
and restores old config if invalid for ice.
Sylwester fixes a check of setting MAC address to occur after result is
received from PF for iavf driver.
Brett changes check of ring tail to use software cached value as not all
devices have access to register tail for iavf driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
V2:
- retarget to net tree instead of net-next;
- fix missed colon in patch subject ('net marvell' vs 'net: mavell');
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is uninit value bug in dgram_sendmsg function in
net/ieee802154/socket.c when the length of valid data pointed by the
msg->msg_name isn't verified.
We introducing a helper function ieee802154_sockaddr_check_size to
check namelen. First we check there is addr_type in ieee802154_addr_sa.
Then, we check namelen according to addr_type.
Also fixed in raw_bind, dgram_bind, dgram_connect.
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Revert a display patch around max DP source rate now
that the proper WaEdpLinkRateDataReload is in place. (Ville)
- Fix perf limit reasons bit position. (Ashutosh)
- Fix unclaimmed mmio registers on suspend flow with GuC. (Umesh)
- A vma_move_to_active fix for a regression with video decoding. (Nirmoy)
- DP DSP fix. (Ankit)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YyMtmGMXRLsURoM5@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* gma500: Locking and IRQ fixes
* meson: OSD1 display fixes
* panel-edp: Fix Innolux timings
* rockchip: DP/HDMI fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YyMUpP1w21CPXq+I@linux-uq9g
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.0-2022-09-14:
amdgpu:
- BACO fixes for some RDNA2 boards
- PCI AER fixes uncovered by a core PCI change
- Properly hook up dirtyfb helper
- RAS fixes for GC 11.x
- TMR fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- LLVM DML stack size fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914184030.6145-1-alexander.deucher@amd.com
|
|
If we're invoked with a fixed file, follow the normal rules of not
calling io_fput_file(). Fixed files are permanently registered to the
ring, and do not need putting separately.
Cc: stable@vger.kernel.org
Fixes: aa184e8671f0 ("io_uring: don't attempt to IOPOLL for MSG_RING requests")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.
Add a quirk to use the same DAC pairs as the G14.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-4-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack
[ Fixed the position in the quirk table by tiwai ]
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack
[ Fixed the position in the quirk table by tiwai ]
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A few entries have been mistakenly inserted in wrong positions without
considering the SSID ordering. Place them at right positions.
Fixes: b7557267c233 ("ALSA: hda/realtek: Add quirk for ASUS GA402")
Fixes: 94db9cc8f8fa ("ALSA: hda/realtek: Add quirk for ASUS GU603")
Fixes: 739d0959fbed ("ALSA: hda: Add quirk for ASUS Flow x13")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915154724.31634-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just as with the 5570 (and the other Dell laptops), this enables the two
subwoofer speakers on the Dell Precision 5530 together with the main
ones, significantly increasing the audio quality. I've tested this
myself on a 5530 and can confirm it's working as expected.
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There's a bug in blkdev_issue_secure_erase. The statement
"unsigned int len = min_t(sector_t, nr_sects, max_sectors);"
sets the variable "len" to the length in sectors, but the statement
"bio->bi_iter.bi_size = len" treats it as if it were in bytes.
The statements "sector += len << SECTOR_SHIFT" and "nr_sects -= len <<
SECTOR_SHIFT" are thinko.
This patch fixes it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v5.19
Fixes: 44abff2c0b97 ("block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD")
Link: https://lore.kernel.org/r/alpine.LRH.2.02.2209141549480.28100@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The previous patch triggered a build failure for the debian kernel,
which has CONFIG_64BIT enabled, uses the CROSS_COMPILER environment
variable and uses ARCH=parisc to configure the kernel for 64-bit
support.
This patch weakens the previous patch while keeping the recommended way
to configure the kernel with:
ARCH=parisc -> build 32-bit kernel
ARCH=parisc64 -> build 64-bit kernel
while adding the possibility for debian to configure a 64-bit kernel
even if ARCH=parisc is set (PA8X00 CPU has to be selected and
CONFIG_64BIT needs to be enabled).
The downside of this patch is, that we now have a small window open
again where people may get it wrong: if they enable CONFIG_64BIT and try
to compile with a 32-bit compiler.
Fixes: 3dcfb729b5f4 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # 5.15+
|
|
kmalloc() returns memory with __assume_kmalloc_alignment, which is
__alignof__(unsigned long long) for parisc.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Move common IP init before GMC init so that HDP gets
remapped before GMC init which uses it.
This fixes the Unsupported Request error reported through
AER during driver load. The error happens as a write happens
to the remap offset before real remapping is done.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This mirrors what we do for other asics and this way we are
sure the sdma doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. However, the statement says that it applies to
multimedia as well, but the VCN code currently initializes
doorbells after GFX and there are no known issues there. In my
testing at least I don't see any problems on SDMA.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This mirrors what we do for other asics and this way we are
sure the ih doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. In this case IH is initialized before GFX,
so there should be no issue.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
