summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-31gpu: ipu-v3: ipu-dmfc: Protect function ipu_dmfc_init_channel() with mutexLiu Ying
To avoid race condition issue, we should protect the function ipu_dmfc_init_channel() with the mutex dmfc->priv->mutex, since it configures the register DMFC_GENERAL1 at runtime which contains several control bits for various display channels. This matches better with fine grained locking logic in upper layer. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-31drm/imx: dw_hdmi: Don't call platform_set_drvdata()Douglas Anderson
The IMX dw_hdmi driver just called platform_set_drvdata() to get your hopes up that maybe, somehow, you'd be able to retrieve the 'struct imx_hdmi' from a pointer to the 'struct device'. You can't. When we call dw_hdmi_bind() the main driver calls dev_set_drvdata(), which clobbers our setting. Let's just remove the platform_set_drvdata() to avoid dashing people's hopes. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-31drm/imx: dw_hdmi: Call drm_encoder_cleanup() in error pathDouglas Anderson
The drm_encoder_cleanup() was missing both from the error path of dw_hdmi_imx_bind(). This caused a crash when slub_debug was enabled and we ended up deferring probe of HDMI at boot. This call isn't needed from unbind() because if dw_hdmi_bind() returns no error then it takes over the job of freeing the encoder (in dw_hdmi_unbind). Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-31drm/imx: ipuv3-plane: fix planar YUV 4:2:0 supportPhilipp Zabel
The driver already advertises multi-planar YUV support, but previously the U/V offset and stride setup was missing. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-31drm/imx: ipuv3-plane: Add more thorough checks for plane parameter limitationsPhilipp Zabel
The IPU addresses multiplanar formats using a base address and relative offsets for the secondary planes. Since those offsets must be positive and not too large, and none of the plane parameters except the base address may be changed while scanout is active, store the pitches and u/v offsets and check all values against IDMAC limitations. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-31gpu: ipu-cpmem: modify ipu_cpmem_set_yuv_planar_full for better controlPhilipp Zabel
Let ipu_cpmem_set_yuv_planar_full take a DRM_FORMAT instead of a V4L2_PIXFMT and allow better control over U/V stride, U offset and V offset settings in the CPMEM. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-31sched/fair: Initiate a new task's util avg to a bounded valueYuyang Du
A new task's util_avg is set to full utilization of a CPU (100% time running). This accelerates a new task's utilization ramp-up, useful to boost its execution in early time. However, it may result in (insanely) high utilization for a transient time period when a flood of tasks are spawned. Importantly, it violates the "fundamentally bounded" CPU utilization, and its side effect is negative if we don't take any measure to bound it. This patch proposes an algorithm to address this issue. It has two methods to approach a sensible initial util_avg: (1) An expected (or average) util_avg based on its cfs_rq's util_avg: util_avg = cfs_rq->util_avg / (cfs_rq->load_avg + 1) * se.load.weight (2) A trajectory of how successive new tasks' util develops, which gives 1/2 of the left utilization budget to a new task such that the additional util is noticeably large (when overall util is low) or unnoticeably small (when overall util is high enough). In the meantime, the aggregate utilization is well bounded: util_avg_cap = (1024 - cfs_rq->avg.util_avg) / 2^n where n denotes the nth task. If util_avg is larger than util_avg_cap, then the effective util is clamped to the util_avg_cap. Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bsegall@google.com Cc: morten.rasmussen@arm.com Cc: pjt@google.com Cc: steve.muckle@linaro.org Link: http://lkml.kernel.org/r/1459283456-21682-1-git-send-email-yuyang.du@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31sched/fair: Update comments after a variable renameYuyang Du
The following commit: ed82b8a1ff76 ("sched/core: Move the sched_to_prio[] arrays out of line") renamed prio_to_weight to sched_prio_to_weight, but the old name was not updated in comments. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1459292871-22531-1-git-send-email-yuyang.du@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31sched/core: Add preempt checks in preempt_schedule() codeSteven Rostedt
While testing the tracer preemptoff, I hit this strange trace: <...>-259 0...1 0us : schedule <-worker_thread <...>-259 0d..1 0us : rcu_note_context_switch <-__schedule <...>-259 0d..1 0us : rcu_sched_qs <-rcu_note_context_switch <...>-259 0d..1 0us : rcu_preempt_qs <-rcu_note_context_switch <...>-259 0d..1 0us : _raw_spin_lock <-__schedule <...>-259 0d..1 0us : preempt_count_add <-_raw_spin_lock <...>-259 0d..2 0us : do_raw_spin_lock <-_raw_spin_lock <...>-259 0d..2 1us : deactivate_task <-__schedule <...>-259 0d..2 1us : update_rq_clock.part.84 <-deactivate_task <...>-259 0d..2 1us : dequeue_task_fair <-deactivate_task <...>-259 0d..2 1us : dequeue_entity <-dequeue_task_fair <...>-259 0d..2 1us : update_curr <-dequeue_entity <...>-259 0d..2 1us : update_min_vruntime <-update_curr <...>-259 0d..2 1us : cpuacct_charge <-update_curr <...>-259 0d..2 1us : __rcu_read_lock <-cpuacct_charge <...>-259 0d..2 1us : __rcu_read_unlock <-cpuacct_charge <...>-259 0d..2 1us : clear_buddies <-dequeue_entity <...>-259 0d..2 1us : account_entity_dequeue <-dequeue_entity <...>-259 0d..2 2us : update_min_vruntime <-dequeue_entity <...>-259 0d..2 2us : update_cfs_shares <-dequeue_entity <...>-259 0d..2 2us : hrtick_update <-dequeue_task_fair <...>-259 0d..2 2us : wq_worker_sleeping <-__schedule <...>-259 0d..2 2us : kthread_data <-wq_worker_sleeping <...>-259 0d..2 2us : pick_next_task_fair <-__schedule <...>-259 0d..2 2us : check_cfs_rq_runtime <-pick_next_task_fair <...>-259 0d..2 2us : pick_next_entity <-pick_next_task_fair <...>-259 0d..2 2us : clear_buddies <-pick_next_entity <...>-259 0d..2 2us : pick_next_entity <-pick_next_task_fair <...>-259 0d..2 2us : clear_buddies <-pick_next_entity <...>-259 0d..2 2us : set_next_entity <-pick_next_task_fair <...>-259 0d..2 3us : put_prev_entity <-pick_next_task_fair <...>-259 0d..2 3us : check_cfs_rq_runtime <-put_prev_entity <...>-259 0d..2 3us : set_next_entity <-pick_next_task_fair gnome-sh-1031 0d..2 3us : finish_task_switch <-__schedule gnome-sh-1031 0d..2 3us : _raw_spin_unlock_irq <-finish_task_switch gnome-sh-1031 0d..2 3us : do_raw_spin_unlock <-_raw_spin_unlock_irq gnome-sh-1031 0...2 3us!: preempt_count_sub <-_raw_spin_unlock_irq gnome-sh-1031 0...1 582us : do_raw_spin_lock <-_raw_spin_lock gnome-sh-1031 0...1 583us : _raw_spin_unlock <-drm_gem_object_lookup gnome-sh-1031 0...1 583us : do_raw_spin_unlock <-_raw_spin_unlock gnome-sh-1031 0...1 583us : preempt_count_sub <-_raw_spin_unlock gnome-sh-1031 0...1 584us : _raw_spin_unlock <-drm_gem_object_lookup gnome-sh-1031 0...1 584us+: trace_preempt_on <-drm_gem_object_lookup gnome-sh-1031 0...1 603us : <stack trace> => preempt_count_sub => _raw_spin_unlock => drm_gem_object_lookup => i915_gem_madvise_ioctl => drm_ioctl => do_vfs_ioctl => SyS_ioctl => entry_SYSCALL_64_fastpath As I'm tracing preemption disabled, it seemed incorrect that the trace would go across a schedule and report not being in the scheduler. Looking into this I discovered the problem. schedule() calls preempt_disable() but the preempt_schedule() calls preempt_enable_notrace(). What happened above was that the gnome-shell task was preempted on another CPU, migrated over to the idle cpu. The tracer stared with idle calling schedule(), which called preempt_disable(), but then gnome-shell finished, and it enabled preemption with preempt_enable_notrace() that does stop the trace, even though preemption was enabled. The purpose of the preempt_disable_notrace() in the preempt_schedule() is to prevent function tracing from going into an infinite loop. Because function tracing can trace the preempt_enable/disable() calls that are traced. The problem with function tracing is: NEED_RESCHED set preempt_schedule() preempt_disable() preempt_count_inc() function trace (before incrementing preempt count) preempt_disable_notrace() preempt_enable_notrace() sees NEED_RESCHED set preempt_schedule() (repeat) Now by breaking out the preempt off/on tracing into their own code: preempt_disable_check() and preempt_enable_check(), we can add these to the preempt_schedule() code. As preemption would then be disabled, even if they were to be traced by the function tracer, the disabled preemption would prevent the recursion. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160321112339.6dc78ad6@gandalf.local.home Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31sched/numa: Remove unnecessary NUMA dequeue update from non-SMP kernelsTim Chen
In account_entity_enqueue(), we do not do account_numa_enqueue() as NUMA balancing is not needed for UP kernels. Hence, we should remove the account_numa_dequeue() call from account_entity_dequeue() for UP kernels. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1454366879.21738.29.camel@schen9-desk2.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31sched/fair: Reset nr_balance_failed after active balancingSrikar Dronamraju
To force a task migration during active balancing, nr_balance_failed is set to cache_nice_tries + 1. However nr_balance_failed is not reset. As a side effect, the next regular load balance under the same sd, a cache hot task might be migrated, just because nr_balance_failed count is high. Resetting nr_balance_failed after a successful active balance ensures that a hot task is not unreasonably migrated. This can be verified by looking at othe number of hot task migrations reported by /proc/schedstat. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1458735884-30105-1-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31sched/cpuacct: Split usage accounting into user_usage and sys_usageDongsheng Yang
Sometimes, cpuacct.usage is not detailed enough to see how much CPU usage a group had. We want to know how much time it used in user mode and how much in kernel mode. This patch introduces more files to give this information: # ls /sys/fs/cgroup/cpuacct/cpuacct.usage* /sys/fs/cgroup/cpuacct/cpuacct.usage /sys/fs/cgroup/cpuacct/cpuacct.usage_percpu /sys/fs/cgroup/cpuacct/cpuacct.usage_user /sys/fs/cgroup/cpuacct/cpuacct.usage_percpu_user /sys/fs/cgroup/cpuacct/cpuacct.usage_sys /sys/fs/cgroup/cpuacct/cpuacct.usage_percpu_sys ... while keeping the ABI with the existing counter. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> [ Ported to newer kernels. ] Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/aa171da036b520b51c79549e9b3215d29473f19d.1458635566.git.zhaolei@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31sched/cpuacct: Show all possible CPUs in cpuacct outputZhao Lei
Current code show stats of online CPUs in cpuacct.statcpus, show stats of present cpus in cpuacct.usage(_percpu), and using present CPUs for setting cpuacct.usage. It will cause inconsistent result when a CPU is online or offline or hotpluged. We should always use possible CPUs to avoid above problem. Here are the contents of a cpuacct.usage_percpu sysfs file, on a 4 CPU system with maxcpus=32: Before the patch: # cat cpuacct.usage_percpu 2456565 411435 1052897 832584 After the patch: # cat cpuacct.usage_percpu 2456565 411435 1052897 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Tejun Heo <htejun@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/a11d56cef12d0b4807f8be3a46bf9798c3014d59.1458635566.git.zhaolei@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31pinctrl: nomadik: fix pull debug print inversionLinus Walleij
Pull up was reported as pull down and vice versa. Fix this. Fixes: 8f1774a2a971 "pinctrl: nomadik: improve GPIO debug prints" Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31arm64: KVM: Register CPU notifiers when the kernel runs at HYPJames Morse
When the kernel is running at EL2, it doesn't need init_hyp_mode() to configure page tables for HYP. This function also registers the CPU hotplug and lower power notifiers that cause HYP to be re-initialised after the CPU has been reset. To avoid losing the register state that controls stage2 translation, move the registering of these notifiers into init_subsystems(), and add a is_kernel_in_hyp_mode() path to each callback. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Fixes: 1e947bad0b6 ("arm64: KVM: Skip HYP setup when already running in HYP") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-03-31drm/qxl: fix cursor position with non-zero hotspotJohn Keeping
The SPICE protocol considers the position of a cursor to be the location of its active pixel on the display, so the cursor is drawn with its top-left corner at "(x - hot_spot_x, y - hot_spot_y)" but the DRM cursor position gives the location where the top-left corner should be drawn, with the hotspot being a hint for drivers that need it. This fixes the location of the window resize cursors when using Fluxbox with the QXL DRM driver and both the QXL and modesetting X drivers. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1447845445-2116-1-git-send-email-john@metanate.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-03-31perf/x86/amd/ibs: Fix pmu::stop() nestingPeter Zijlstra
Patch 5a50f5291701 ("perf/x86/ibs: Fix race with IBS_STARTING state") closed a big hole while opening another, smaller hole. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 5a50f5291701 ("perf/x86/ibs: Fix race with IBS_STARTING state") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31perf/core: Don't leak event in the syscall error pathAlexander Shishkin
In the error path, event_file not being NULL is used to determine whether the event itself still needs to be free'd, so fix it up to avoid leaking. Reported-by: Leon Yu <chianglungyu@gmail.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 130056275ade ("perf: Do not double free") Link: http://lkml.kernel.org/r/87twk06yxp.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31perf/core: Fix time tracking bug with multiplexingPeter Zijlstra
Stephane reported that commit: 3cbaa5906967 ("perf: Fix ctx time tracking by introducing EVENT_TIME") introduced a regression wrt. time tracking, as easily observed by: > This patch introduce a bug in the time tracking of events when > multiplexing is used. > > The issue is easily reproducible with the following perf run: > > $ perf stat -a -C 0 -e branches,branches,branches,branches,branches,branches -I 1000 > 1.000730239 652,394 branches (66.41%) > 1.000730239 597,809 branches (66.41%) > 1.000730239 593,870 branches (66.63%) > 1.000730239 651,440 branches (67.03%) > 1.000730239 656,725 branches (66.96%) > 1.000730239 <not counted> branches > > One branches event is shown as not having run. Yet, with > multiplexing, all events should run especially with a 1s (-I 1000) > interval. The delta for time_running comes out to 0. Yet, the event > has run because the kernel is actually multiplexing the events. The > problem is that the time tracking is the kernel and especially in > ctx_sched_out() is wrong now. > > The problem is that in case that the kernel enters ctx_sched_out() with the > following state: > ctx->is_active=0x7 event_type=0x1 > Call Trace: > [<ffffffff813ddd41>] dump_stack+0x63/0x82 > [<ffffffff81182bdc>] ctx_sched_out+0x2bc/0x2d0 > [<ffffffff81183896>] perf_mux_hrtimer_handler+0xf6/0x2c0 > [<ffffffff811837a0>] ? __perf_install_in_context+0x130/0x130 > [<ffffffff810f5818>] __hrtimer_run_queues+0xf8/0x2f0 > [<ffffffff810f6097>] hrtimer_interrupt+0xb7/0x1d0 > [<ffffffff810509a8>] local_apic_timer_interrupt+0x38/0x60 > [<ffffffff8175ca9d>] smp_apic_timer_interrupt+0x3d/0x50 > [<ffffffff8175ac7c>] apic_timer_interrupt+0x8c/0xa0 > > In that case, the test: > if (is_active & EVENT_TIME) > > will be false and the time will not be updated. Time must always be updated on > sched out. Fix this by always updating time if EVENT_TIME was set, as opposed to only updating time when EVENT_TIME changed. Reported-by: Stephane Eranian <eranian@google.com> Tested-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Cc: namhyung@kernel.org Fixes: 3cbaa5906967 ("perf: Fix ctx time tracking by introducing EVENT_TIME") Link: http://lkml.kernel.org/r/20160329072644.GB3408@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31vti: Add pmtu handling to vti_xmit.Steffen Klassert
We currently rely on the PMTU discovery of xfrm. However if a packet is locally sent, the PMTU mechanism of xfrm tries to do local socket notification what might not work for applications like ping that don't check for this. So add pmtu handling to vti_xmit to report MTU changes immediately. Reported-by: Mark McKinstry <Mark.McKinstry@alliedtelesis.co.nz> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-03-31Merge tag 'perf-urgent-for-mingo-20160330' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix determination of a callchain node's childlessness in the top/report TUI, which was preventing navigating some callchains, --stdio unnaffected (Andres Freund) - Fix jitdump's genelf assumption that PowerPC is big endian only (Anton Blanchard) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-30usb: fix regression in SuperSpeed endpoint descriptor parsingMathias Nyman
commit b37d83a6a414 ("usb: Parse the new USB 3.1 SuperSpeedPlus Isoc endpoint companion descriptor") caused a regression in 4.6-rc1 and fails to parse SuperSpeed endpoint companion descriptors. The new SuperSpeedPlus Isoc endpoint companion parsing code incorrectly decreased the the remaining buffer size before comparing the size with the expected length of the descriptor. This lead to possible failure in reading the SuperSpeed endpoint companion descriptor of the last endpoint, displaying a message like: "No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values" Fix it by decreasing the size after comparing it. Also finish all the SS endpoint companion parsing before calling SSP isoc endpoint parsing function. Fixes: b37d83a6a414 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-30USB: usbip: fix potential out-of-bounds writeIgnat Korchagin
Fix potential out-of-bounds write to urb->transfer_buffer usbip handles network communication directly in the kernel. When receiving a packet from its peer, usbip code parses headers according to protocol. As part of this parsing urb->actual_length is filled. Since the input for urb->actual_length comes from the network, it should be treated as untrusted. Any entity controlling the network may put any value in the input and the preallocated urb->transfer_buffer may not be large enough to hold the data. Thus, the malicious entity is able to write arbitrary data to kernel memory. Signed-off-by: Ignat Korchagin <ignat.korchagin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-30Merge tag 'fixes-for-v4.6-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.6-rc2 A couple fixes for the new SuperSpeedPlus that went in during this merge window. Also two minor fixes for dwc3 (one for setting endpoint naming correctly and another to improve time spent in our reset sequence) and an old bug fix on Atmel UDC which was disabling endpoints when it shouldn't. There's also a build breakage fix to the qcom phy driver and a fix to the f_midi gadget to avoid a race condition with f_midi_transmit().
2016-03-31fix the braino in "namei: massage lookup_slow() to be usable by ↵Al Viro
lookup_one_len_unlocked()" We should try to trigger automount *before* bailing out on negative dentry. Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Reported-by: Arend van Spriel <arend@broadcom.com> Tested-by: Arend van Spriel <arend@broadcom.com> Tested-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-30target: add a new add_wwn_groups fabrics methodChristoph Hellwig
We need to have the WWN fully initialized before addig default groups to it, so add a new method to add these groups after the WWN has been initialized. Also remove the default groups in the core while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-30target: initialize the nacl base CIT begfore init_nodeaclChristoph Hellwig
The iSCSI targets wants to add a default group, for which we need to have the list of default groups initialized previously. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-30target: remove ->fabric_cleanup_nodeaclChristoph Hellwig
Instead we can clean up the list of default ACLs in core code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-30iser-target: Use ib_drain_qpSagi Grimberg
Now the rdma core offers a QP draining service in v4.6-rc1, use it instead of our own. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-30ext4: allow readdir()'s of large empty directories to be interruptedTheodore Ts'o
If a directory has a large number of empty blocks, iterating over all of them can take a long time, leading to scheduler warnings and users getting irritated when they can't kill a process in the middle of one of these long-running readdir operations. Fix this by adding checks to ext4_readdir() and ext4_htree_fill_tree(). Reported-by: Benjamin LaHaise <bcrl@kvack.org> Google-Bug-Id: 27880676 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-03-30Merge tag 'nios2-v4.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 fix from Ley Foon Tan: "Replace fdt_translate_address with of_flat_dt_translate_address" Fixes a build failure. * tag 'nios2-v4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: Replace fdt_translate_address with of_flat_dt_translate_address
2016-03-31nios2: Replace fdt_translate_address with of_flat_dt_translate_addressGuenter Roeck
nios2 builds fail with the following build error. arch/nios2/kernel/prom.c: In function 'early_init_dt_scan_serial': arch/nios2/kernel/prom.c:100:2: error: implicit declaration of function 'fdt_translate_address' Commit c90fe9c0394b ("of: earlycon: Move address translation to of_setup_earlycon()") replaced fdt_translate_address() with of_flat_dt_translate_address() but missed updating the nios2 code. Fixes: c90fe9c0394b ("of: earlycon: Move address translation to of_setup_earlycon()") Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Ley Foon Tan <lftan@altera.com>
2016-03-30btrfs: fix crash/invalid memory access on fsync when using overlayfsFilipe Manana
If the lower or upper directory of an overlayfs mount belong to a btrfs file system and we fsync the file through the overlayfs' merged directory we ended up accessing an inode that didn't belong to btrfs as if it were a btrfs inode at btrfs_sync_file() resulting in a crash like the following: [ 7782.588845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000544 [ 7782.590624] IP: [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs] [ 7782.591931] PGD 4d954067 PUD 1e878067 PMD 0 [ 7782.592016] Oops: 0002 [#6] PREEMPT SMP DEBUG_PAGEALLOC [ 7782.592016] Modules linked in: btrfs overlay ppdev crc32c_generic evdev xor raid6_pq psmouse pcspkr sg serio_raw acpi_cpufreq parport_pc parport tpm_tis i2c_piix4 tpm i2c_core processor button loop autofs4 ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs] [ 7782.592016] CPU: 10 PID: 16437 Comm: xfs_io Tainted: G D 4.5.0-rc6-btrfs-next-26+ #1 [ 7782.592016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 7782.592016] task: ffff88001b8d40c0 ti: ffff880137488000 task.ti: ffff880137488000 [ 7782.592016] RIP: 0010:[<ffffffffa030b7ab>] [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs] [ 7782.592016] RSP: 0018:ffff88013748be40 EFLAGS: 00010286 [ 7782.592016] RAX: 0000000080000000 RBX: ffff880133b30c88 RCX: 0000000000000001 [ 7782.592016] RDX: 0000000000000001 RSI: ffffffff8148fec0 RDI: 00000000ffffffff [ 7782.592016] RBP: ffff88013748bec0 R08: 0000000000000001 R09: 0000000000000000 [ 7782.624248] R10: ffff88013748be40 R11: 0000000000000246 R12: 0000000000000000 [ 7782.624248] R13: 0000000000000000 R14: 00000000009305a0 R15: ffff880015e3be40 [ 7782.624248] FS: 00007fa83b9cb700(0000) GS:ffff88023ed40000(0000) knlGS:0000000000000000 [ 7782.624248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7782.624248] CR2: 0000000000000544 CR3: 00000001fa652000 CR4: 00000000000006e0 [ 7782.624248] Stack: [ 7782.624248] ffffffff8108b5cc ffff88013748bec0 0000000000000246 ffff8800b005ded0 [ 7782.624248] ffff880133b30d60 8000000000000000 7fffffffffffffff 0000000000000246 [ 7782.624248] 0000000000000246 ffffffff81074f9b ffffffff8104357c ffff880015e3be40 [ 7782.624248] Call Trace: [ 7782.624248] [<ffffffff8108b5cc>] ? arch_local_irq_save+0x9/0xc [ 7782.624248] [<ffffffff81074f9b>] ? ___might_sleep+0xce/0x217 [ 7782.624248] [<ffffffff8104357c>] ? __do_page_fault+0x3c0/0x43a [ 7782.624248] [<ffffffff811a2351>] vfs_fsync_range+0x8c/0x9e [ 7782.624248] [<ffffffff811a237f>] vfs_fsync+0x1c/0x1e [ 7782.624248] [<ffffffff811a24d6>] do_fsync+0x31/0x4a [ 7782.624248] [<ffffffff811a2700>] SyS_fsync+0x10/0x14 [ 7782.624248] [<ffffffff81493617>] entry_SYSCALL_64_fastpath+0x12/0x6b [ 7782.624248] Code: 85 c0 0f 85 e2 02 00 00 48 8b 45 b0 31 f6 4c 29 e8 48 ff c0 48 89 45 a8 48 8d 83 d8 00 00 00 48 89 c7 48 89 45 a0 e8 fc 43 18 e1 <f0> 41 ff 84 24 44 05 00 00 48 8b 83 58 ff ff ff 48 c1 e8 07 83 [ 7782.624248] RIP [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs] [ 7782.624248] RSP <ffff88013748be40> [ 7782.624248] CR2: 0000000000000544 [ 7782.661994] ---[ end trace 721e14960eb939bc ]--- This started happening since commit 4bacc9c9234 (overlayfs: Make f_path always point to the overlay and f_inode to the underlay) and even though after this change we could still access the btrfs inode through struct file->f_mapping->host or struct file->f_inode, we would end up resulting in more similar issues later on at check_parent_dirs_for_sync() because the dentry we got (from struct file->f_path.dentry) was from overlayfs and not from btrfs, that is, we had no way of getting the dentry that belonged to btrfs (we always got the dentry that belonged to overlayfs). The new patch from Miklos Szeredi, titled "vfs: add file_dentry()" and recently submitted to linux-fsdevel, adds a file_dentry() API that allows us to get the btrfs dentry from the input file and therefore being able to fsync when the upper and lower directories belong to btrfs filesystems. This issue has been reported several times by users in the mailing list and bugzilla. A test case for xfstests is being submitted as well. Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101951 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109791 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> Cc: stable@vger.kernel.org
2016-03-30bpf: make padding in bpf_tunnel_key explicitDaniel Borkmann
Make the 2 byte padding in struct bpf_tunnel_key between tunnel_ttl and tunnel_label members explicit. No issue has been observed, and gcc/llvm does padding for the old struct already, where tunnel_label was not yet present, so the current code works, but since it's part of uapi, make sure we don't introduce holes in structs. Therefore, add tunnel_ext that we can use generically in future (f.e. to flag OAM messages for backends, etc). Also add the offset to the compat tests to be sure should some compilers not padd the tail of the old version of bpf_tunnel_key. Fixes: 4018ab1875e0 ("bpf: support flow label for bpf_skb_{set, get}_tunnel_key") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30ipv6: udp: fix UDP_MIB_IGNOREDMULTI updatesEric Dumazet
IPv6 counters updates use a different macro than IPv4. Fixes: 36cbb2452cbaf ("udp: Increment UDP_MIB_IGNOREDMULTI for arriving unmatched multicasts") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rick Jones <rick.jones2@hp.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30bnxt_en: Fix ethtool -a reporting.Michael Chan
To report flow control tx/rx settings accurately regardless of autoneg setting, we should use link_info->req_flow_ctrl. Before this patch, the reported settings were only correct when autoneg was on. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30bnxt_en: Fix typo in bnxt_hwrm_set_pause_common().Michael Chan
The typo caused the wrong flow control bit to be set. Reported by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30bnxt_en: Implement proper firmware message padding.Michael Chan
The size of every padded firmware message is specified in the first HWRM_VER_GET response message. Use this value to pad every message after that. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30bnxt_en: Initialize CP doorbell value before ring allocationPrashant Sreedharan
The existing code does the following: allocate completion ring initialize completion ring doorbell disable interrupts on this completion ring by writing to the doorbell We can have a race where firmware sends an asynchronous event to the host after completion ring allocation and before doorbell is initialized. When this happens driver can crash while ringing the doorbell using uninitialized value as part of handling the IRQ/napi request. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link typeYegor Yefremov
In Baltos iR5221 cpsw_emac0 is connected directly to the switch IC and hence needs to be configured as "fixed-link". Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30ARM: OMAP: Correct interrupt type for ARM TWDJon Hunter
The ARM TWD interrupt is a private peripheral interrupt (PPI) and per the ARM GIC documentation, whether the type for PPIs can be set is IMPLEMENTATION DEFINED. For OMAP4 devices the PPI type cannot be set and so when we attempt to set the type for the ARM TWD interrupt it fails. This has done unnoticed because it fails silently and because we cannot re-configure the type it has had no impact. Nevertheless fix the type for the TWD interrupt so that it matches the hardware configuration. Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30ARM: DRA722: Add ID detect for Silicon Rev 2.0Vishal Mahaveer
Silicon Rev 2.0 is a minor variant of Rev 1.0. Rev 2.0 is an incremental revision with various fixes including the following: - Reset logic fixes - Few asymmetric aging logic fixes - Ethernet speed fixes - EDMA fixes for McASP Signed-off-by: Vishal Mahaveer <vishalm@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30ARM: dts: am43xx: fix edma memcpy channel allocationTero Kristo
EDMA was allocating DMA channels 32 and 33 for memcpy usage, out of which channel 33 is actually used by DES crypto engine. This bad allocation of the channel causes a crash in the DES crypto engine, as the channel gets configured for memcpy usage instead of hardware <-> memory DMA. Fixed by allocating DMA channels 58 and 59 for memcpy usage (I2C0 RX/TX), which are not used by anybody. Fixes: cce1ee000187 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Tero Kristo <t-kristo@ti.com> Suggested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30ARM: dts: AM43x-epos: Fix clk parent for synctimerLokesh Vutla
commit 55ee7017ee31 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") makes synctimer32k as the clocksource on AM43xx. By default the synctimer32k is clocked by 32K RTC OSC on AM43xx. But this 32K RTC OSC is not available on epos boards which makes it fail to boot. Synctimer32k can also be clocked by a peripheral PLL, so making this as clock parent for synctimer3k on epos boards. Fixes: 55ee7017ee31 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") Cc: stable@vger.kernel.org # v4.4+ Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30ARM: OMAP2: Fix up interconnect barrier initialization for DRA7Nishanth Menon
The following commits: commit 3fa609755c11 ("ARM: omap2: restore OMAP4 barrier behaviour") commit f746929ffdc8 ("Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688"") and commit ea827ad5ffbb ("ARM: DRA7: Provide proper IO map table") came in around the same time, unfortunately this seem to have missed initializing the barrier for DRA7 platforms - omap5_map_io was reused for dra7 till it was split out by the last patch. barrier_init needs to be hence carried forward as it is valid for DRA7 family of processors as they are for OMAP5. Fixes: ea827ad5ffbb7 ("ARM: DRA7: Provide proper IO map table") Cc: stable@vger.kernel.org # v4.1+ Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-30perf jit: genelf makes assumptions about endianAnton Blanchard
Commit 9b07e27f88b9 ("perf inject: Add jitdump mmap injection support") incorrectly assumed that PowerPC is big endian only. Simplify things by consolidating the define of GEN_ELF_ENDIAN and checking for __BYTE_ORDER == __BIG_ENDIAN. The PowerPC checks were also incorrect, they do not match what gcc emits. We should first look for __powerpc64__, then __powerpc__. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Carl Love <cel@us.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Fixes: 9b07e27f88b9 ("perf inject: Add jitdump mmap injection support") Link: http://lkml.kernel.org/r/20160329175944.33a211cc@kryten Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-30perf hists: Fix determination of a callchain node's childlessnessAndres Freund
The 4b3a3212233a ("perf hists browser: Support flat callchains") commit over-aggressively tried to optimize callchain_node__init_have_children(). That lead to --tui mode not allowing to expand call chain elements if a call chain element had only one parent. That's why --inverted callgraphs looked halfway sane, but plain ones didn't. Revert that individual optimization, it wasn't really related to the rest of the commit. Signed-off-by: Andres Freund <andres@anarazel.de> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 4b3a3212233a ("perf hists browser: Support flat callchains") Link: http://lkml.kernel.org/r/20160330190245.GB13305@awork2.anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-30team: team should sync the port's uc/mc addrs when add a portXin Long
There is an issue when we use mavtap over team: When we replug nic links from team0, the real nics's mc list will not include the maddr for macvtap any more. then we can't receive pkts to macvtap device, as they are filterred by mc list of nic. In Bonding Driver, it syncs the uc/mc addrs in bond_enslave(). We will fix this issue on team by adding the port's uc/mc addrs sync in team_port_add. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30f2fs: retrieve IO write stat from the right placeShuoran Liu
In the following patch, f2fs: split journal cache from curseg cache journal cache is split from curseg cache. So IO write statistics should be retrived from journal cache but not curseg->sum_blk. Otherwise, it will get 0, and the stat is lost. Signed-off-by: Shuoran Liu <liushuoran@huawei.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-03-30f2fs crypto: fix corrupted symlink in encrypted caseJaegeuk Kim
In the encrypted symlink case, we should check its corrupted symname after decrypting it. Otherwise, we can report -ENOENT incorrectly, if encrypted symname starts with '\0'. Cc: stable 4.5+ <stable@vger.kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-17 02:37:06 +0000