| Age | Commit message (Collapse) | Author |
|---|
|
Add tracing of reservation commands, including register, acquire,
release and report, and also parse the action and rtype to string
to make the trace log more human-readable.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Parse reservation commands's action(including rrega, racqa and rrela)
and rtype to string to make the trace log more human-readable.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Currently, we report that controller has vwc even though the ns may
not have vwc. Report ns's vwc not present when not buffered_io or
backdev doesn't have vwc.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When the VWC of a namespace does not exist, the BLK_FEAT_WRITE_CACHE
flag should not be set when registering the block device, regardless
of whether the controller supports VWC.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Rotational devices, such as hard-drives, can be detected using
the rotational bit in the namespace independent identify namespace
data structure. Make the bit visible to the block layer through the
rotational queue setting.
Signed-off-by: Wang Yugui <wangyugui@e16-tech.com>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The NVMe 2.0 specification adds an independent identify namespace
data structure that contains generic attributes that apply to all
namespace types. Some attributes carry over from the NVM command set
identify namespace data structure, and others are new.
Currently, the data structure only considered when CRIMS is enabled or
when the namespace type is key-value.
However, the independent namespace data structure is mandatory for
devices that implement features from the 2.0+ specification. Therefore,
we can check this data structure first. If unavailable, retrieve the
generic attributes from the NVM command set identify namespace data
structure.
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Implements reporting the I/O Command Set Independent Identify Namespace
command.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Most of the information is stubbed. Supporting these commands is a
requirement for supporting rotational media.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Most of the returned information is just stubbed data. The target must
support these in order to report rotational media. Since this driver
doesn't know any better, each namespace is its own endurance group with
the engid value matching the nsid.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The target driver implements all the mandatory logs, identifications,
features, and properties up to nvme sepcification 2.1.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This property is required for nvme 2.1. The target only supports ready
with media, so this is just the same value as CAP.TO.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This log is required for nvme 2.1.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This log is required for nvme 2.1.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This is required for nvme 2.1 for targets that support multiple command
sets. We support NVM and ZNS, so are required to support this
identification.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We don't report anything here, but it's a mandatory identification for
nvme 2.1.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch implements the reservation feature, including:
1. reservation register(register, unregister and replace).
2. reservation acquire(acquire, preempt, preempt and abort).
3. reservation release(release and clear).
4. reservation report.
5. set feature and get feature of reservation notify mask.
6. get log page of reservation event.
Not supported:
1. persistent reservation through power loss.
Test cases:
Use nvme-cli and fio to test all implemented sub features:
1. use nvme resv-register to register host a registrant or
unregister or replace a new key.
2. use nvme resv-acquire to set host to the holder, and use fio
to send read and write io in all reservation type. And also
test preempt and "preempt and abort".
3. use nvme resv-report to show all registrants and reservation
status.
4. use nvme resv-release to release all registrants.
5. use nvme get-log to get events generated by the preceding
operations.
In addition, make reservation configurable, one can set ns to
support reservation before enable ns. The default of resv_enable
is false.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This is a preparation patch for NVMeOF target reservation
commands implantation.
Add the defines of reservation command, such as reservation log
and sub operations.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In nvme_core_init() nvme_wq, nvme_reset_wq, nvme_delete_wq share same
flags :- WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_SYSFS.
Insated of repeating these flags in each call use the common variable.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In some complex scenarios, we deploy multiple tasks on a single machine
(hybrid deployment), such as Docker containers for function computation
(background processing), real-time tasks, monitoring, event handling,
and management, along with an NVMe target server.
Each of these components is restricted to its own CPU cores to prevent
mutual interference and ensure strict isolation. To achieve this level
of isolation for nvmet_wq we need to use sysfs tunables such as
cpumask that are currently not accessible.
Add WQ_SYSFS flag to alloc_workqueue() when creating nvmet_wq so
workqueue tunables are exported in the userspace via sysfs.
with this patch :-
nvme (nvme-6.13) # ls /sys/devices/virtual/workqueue/nvmet-wq/
affinity_scope affinity_strict cpumask max_active nice per_cpu
power subsystem uevent
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Use dma_alloc_noncontigous to allocate a single IOVA-contigous segment
when backed by an IOMMU. This allow to easily use bigger segments and
avoids running into segment limits if we can avoid it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The HMB descriptor table is sized to the maximum number of descriptors
that could be used for a given device, but __nvme_alloc_host_mem could
break out of the loop earlier on memory allocation failure and end up
using less descriptors than planned for, which leads to an incorrect
size passed to dma_free_coherent.
In practice this was not showing up because the number of descriptors
tends to be low and the dma coherent allocator always allocates and
frees at least a page.
Fixes: 87ad72a59a38 ("nvme-pci: implement host memory buffer support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Command implementations shouldn't be directly looking into io_uring_cmd
to carve free space. Use an io_uring helper, which will also do build
time size sanitisation.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Merge in block/fs prep patches for the atomic write support.
* for-6.13/block-atomic:
block: Add bdev atomic write limits helpers
fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid()
block/fs: Pass an iocb to generic_atomic_write_valid()
|
|
When a process migrates to another cgroup and the original cgroup is deleted,
the restrictions of throttled bios cannot be removed. If the restrictions
are set too low, it will take a long time to complete these bios.
Refer to the process of deleting a disk to remove the restrictions and
issue bios when deleting the cgroup.
This makes difference on the behavior of throttled bios:
Before: the limit of the throttled bios can't be changed and the bios will
complete under this limit;
Now: the limit will be canceled and the throttled bios will be flushed
immediately.
References:
[1] https://lore.kernel.org/r/20220318130144.1066064-4-ming.lei@redhat.com
[2] https://lore.kernel.org/all/da861d63-58c6-3ca0-2535-9089993e9e28@huaweicloud.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240817071108.1919729-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Supposing first scenario with a virtio_blk driver.
CPU0 CPU1
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_request_bypass_insert() 1) store
blk_mq_start_stopped_hw_queue()
clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending())
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
return
__blk_mq_sched_dispatch_requests()
Supposing another scenario.
CPU0 CPU1
blk_mq_requeue_work()
blk_mq_insert_request() 1) store
virtblk_done()
blk_mq_start_stopped_hw_queue()
blk_mq_run_hw_queues() clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
continue
blk_mq_run_hw_queue()
Both scenarios are similar, the full memory barrier should be inserted
between 1) and 2), as well as between 3) and 4) to make sure that either
CPU0 sees BLK_MQ_S_STOPPED is cleared or CPU1 sees dispatch list.
Otherwise, either CPU will not rerun the hardware queue causing
starvation of the request.
The easy way to fix it is to add the essential full memory barrier into
helper of blk_mq_hctx_stopped(). In order to not affect the fast path
(hardware queue is not stopped most of the time), we only insert the
barrier into the slow path. Actually, only slow path needs to care about
missing of dispatching the request to the low-level device driver.
Fixes: 320ae51feed5 ("blk-mq: new multi-queue block IO queueing mechanism")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-4-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Supposing the following scenario.
CPU0 CPU1
blk_mq_insert_request() 1) store
blk_mq_unquiesce_queue()
blk_queue_flag_clear() 3) store
blk_mq_run_hw_queues()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_run_hw_queue()
if (blk_queue_quiesced()) 2) load
return
blk_mq_sched_dispatch_requests()
The full memory barrier should be inserted between 1) and 2), as well as
between 3) and 4) to make sure that either CPU0 sees QUEUE_FLAG_QUIESCED
is cleared or CPU1 sees dispatch list or setting of bitmap of software
queue. Otherwise, either CPU will not rerun the hardware queue causing
starvation.
So the first solution is to 1) add a pair of memory barrier to fix the
problem, another solution is to 2) use hctx->queue->queue_lock to
synchronize QUEUE_FLAG_QUIESCED. Here, we chose 2) to fix it since
memory barrier is not easy to be maintained.
Fixes: f4560ffe8cec ("blk-mq: use QUEUE_FLAG_QUIESCED to quiesce queue")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-3-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Supposing the following scenario with a virtio_blk driver.
CPU0 CPU1 CPU2
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_try_issue_directly()
if (blk_mq_hctx_stopped())
blk_mq_request_bypass_insert() blk_mq_run_hw_queue()
blk_mq_run_hw_queue() blk_mq_run_hw_queue()
blk_mq_insert_request()
return
After CPU0 has marked the queue as stopped, CPU1 will see the queue is
stopped. But before CPU1 puts the request on the dispatch list, CPU2
receives the interrupt of completion of request, so it will run the
hardware queue and marks the queue as non-stopped. Meanwhile, CPU1 also
runs the same hardware queue. After both CPU1 and CPU2 complete
blk_mq_run_hw_queue(), CPU1 just puts the request to the same hardware
queue and returns. It misses dispatching a request. Fix it by running
the hardware queue explicitly. And blk_mq_request_issue_directly()
should handle a similar situation. Fix it as well.
Fixes: d964f04a8fde ("blk-mq: fix direct issue")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-2-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 5b7048b89745c3c5fb4b3080fb7bced61dba2a2b.
The main purpose of this patch is cleanup.
The throtl_adjusted_limit function was removed after
commit bf20ab538c81 ("blk-throttle: remove
CONFIG_BLK_DEV_THROTTLING_LOW"), so the problem of not being
able to scale after setting bps or iops to 1 will not occur.
So revert this commit that bps/iops can be set to 1.
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20241016024508.3340330-1-xiuhong.wang@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20241013201704.49576-10-Julia.Lawall@inria.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After a SED drive is provisioned, there is no way to change the SID
password via the ioctl() interface. A new ioctl IOC_OPAL_SET_SID_PW
will allow the password to be changed. The valid current password is
required.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20240829175639.6478-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241007182419.3263186-6-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk currently supports the following behaviors on ublk server exit:
A: outstanding I/Os get errors, subsequently issued I/Os get errors
B: outstanding I/Os get errors, subsequently issued I/Os queue
C: outstanding I/Os get reissued, subsequently issued I/Os queue
and the following behaviors for recovery of preexisting block devices by
a future incarnation of the ublk server:
1: ublk devices stopped on ublk server exit (no recovery possible)
2: ublk devices are recoverable using start/end_recovery commands
The userspace interface allows selection of combinations of these
behaviors using flags specified at device creation time, namely:
default behavior: A + 1
UBLK_F_USER_RECOVERY: B + 2
UBLK_F_USER_RECOVERY|UBLK_F_USER_RECOVERY_REISSUE: C + 2
The behavior A + 2 is currently unsupported. Add support for this
behavior under the new flag combination
UBLK_F_USER_RECOVERY|UBLK_F_USER_RECOVERY_FAIL_IO.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241007182419.3263186-5-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Save some lines by merging stop_work and quiesce_work into nosrv_work,
which looks at the recovery flags and does the right thing when the "no
ublk server" condition is detected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241007182419.3263186-4-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk currently supports the following behaviors on ublk server exit:
A: outstanding I/Os get errors, subsequently issued I/Os get errors
B: outstanding I/Os get errors, subsequently issued I/Os queue
C: outstanding I/Os get reissued, subsequently issued I/Os queue
and the following behaviors for recovery of preexisting block devices by
a future incarnation of the ublk server:
1: ublk devices stopped on ublk server exit (no recovery possible)
2: ublk devices are recoverable using start/end_recovery commands
The userspace interface allows selection of combinations of these
behaviors using flags specified at device creation time, namely:
default behavior: A + 1
UBLK_F_USER_RECOVERY: B + 2
UBLK_F_USER_RECOVERY|UBLK_F_USER_RECOVERY_REISSUE: C + 2
We can't easily change the userspace interface to allow independent
selection of one of {A, B, C} and one of {1, 2}, but we can refactor the
internal helpers which test for the flags. Replace the existing helpers
with the following set:
ublk_nosrv_should_reissue_outstanding: tests for behavior C
ublk_nosrv_[dev_]should_queue_io: tests for behavior B
ublk_nosrv_should_stop_dev: tests for behavior 1
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241007182419.3263186-3-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Setting UBLK_F_USER_RECOVERY_REISSUE without also setting
UBLK_F_USER_RECOVERY is currently silently equivalent to not setting any
recovery flags at all, even though that's obviously not intended. Check
for this case and fail add_dev (with a paranoid warning to aid debugging
any program which might rely on the old behavior) with EINVAL if it is
detected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241007182419.3263186-2-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Applications using the passthrough interfaces for IO want to continue
seeing the disk stats. These requests had been fenced off from this
block layer feature. While the block layer doesn't necessarily know what
a passthrough command does, we do know the data size and direction,
which is enough to account for the command's stats.
Since tracking these has the potential to produce unexpected results,
the passthrough stats are locked behind a new queue flag that needs to
be enabled with the /sys/block/<dev>/queue/iostats_passthrough
attribute.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241007153236.2818562-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Requesting a module either succeeds or does nothing, return an error from
this method does not make sense.
Also move the load_module after the store method in the struct
declaration to keep the important show and store methods together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241008050841.104602-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Both most common formats have uuid in addition to partition name:
GPT: standard uuid xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
DOS: 4 byte disk signature and 1 byte partition xxxxxxxx-xx
Tools from util-linux use the same notation for them.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Kyle Fortin <kyle.fortin@oracle.com>
[dianders: rebased to modern kernels]
Signed-off-by: Douglas Anderson <dianders@google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241004171340.v2.1.I938c91d10e454e841fdf5d64499a8ae8514dc004@changeid
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's known needed at that point, and it's cleaner to just assign it
there rather than rely on it being reliably set before hitting the
IO accounting. Hence, move it out of blk_mq_rq_time_init(), which is
now only doing the allocation side timing.
While at it, get rid of the '0' time passing to blk_mq_rq_time_init(),
just pass in blk_time_get_ns() for the two cases where 0 is being
explicitly passed in. The rest pass in the previously cached allocation
time.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A previous commit moved RQF_IO_STAT into blk_account_io_done(), where
it's being set rather than at allocation time. Unfortunately we do check
for that flag in blk_mq_rq_time_init(), and hence setting the
start_time_ns wasn't being done. This lead to unwieldy inflight IO counts
and times, as IO completion accounting would a 0 value rather than the
issue time for it's subtraction math.
Fix this by switching the blk_mq_rq_time_init() check to use the queue
state rather than the request state.
Fixes: b8f762400ae8 ("block: move iostat check into blk_acount_io_start()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202410062110.512391df-oliver.sang@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document support for defining a partition table in the mmc-card node.
This is needed if the eMMC doesn't have a partition table written and
the bootloader of the device load data by using absolute offset of the
block device. This is common on embedded device that have eMMC installed
to save space and have non removable block devices.
If an OF partition table is detected, any partition table written in the
eMMC will be ignored and won't be parsed.
eMMC provide a generic disk for user data and if supported (JEDEC 4.4+)
also provide two additional disk ("boot1" and "boot2") for special usage
of boot operation where normally is stored the bootloader or boot info.
New JEDEC version also supports up to 4 GP partition for other usage
called "gp1", "gp2", "gp3", "gp4".
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241002221306.4403-7-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for partition table defined in Device Tree. Similar to how
it's done with MTD, add support for defining a fixed partition table in
device tree.
A common scenario for this is fixed block (eMMC) embedded devices that
have no MBR or GPT partition table to save storage space. Bootloader
access the block device with absolute address of data.
This is to complete the functionality with an equivalent implementation
with providing partition table with bootargs, for case where the booargs
can't be modified and tweaking the Device Tree is the only solution to
have an usabe partition table.
The implementation follow the fixed-partitions parser used on MTD
devices where a "partitions" node is expected to be declared with
"fixed-partitions" compatible in the OF node of the disk device
(mmc-card for eMMC for example) and each child node declare a label
and a reg with offset and size. If label is not declared, the node name
is used as fallback. Eventually is also possible to declare the read-only
property to flag the partition as read-only.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241002221306.4403-6-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Attach partitions fwnode if found in mmc-card and register disk with it.
This permits block partition to reference the node and register a
partition table defined in DT for the special case for embedded device
that doesn't have a partition table flashed but have an hardcoded
partition table passed from the system.
JEDEC BOOT partition boot0/boot1 are supported but in DT we refer with
the JEDEC name of boot1 and boot2 to better adhere to documentation.
Also JEDEC GP partition gp0/1/2/3 are supported but in DT we refer with
the JEDEC name of gp1/2/3/4 to better adhere to documentration.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241002221306.4403-5-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce add_disk_fwnode() as a replacement of device_add_disk() that
permits to pass and attach a fwnode to disk dev.
This variant can be useful for eMMC that might have the partition table
for the disk defined in DT. A parser can later make use of the attached
fwnode to parse the related table and init the hardcoded partition for
the disk.
device_add_disk() is converted to a simple wrapper of add_disk_fwnode()
with the fwnode entry set as NULL.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241002221306.4403-4-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document support for read-only partition in cmdline partition for block
devices by appending "ro" after the (partition name).
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20241002221306.4403-3-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for defining read-only partitions and complete support for
it in the cmdline partition parser as the additional "ro" after a
partition is scanned but never actually applied.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241002221306.4403-2-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's now just checking whether or not RQF_IO_STAT is set, so let's get
rid of it and just open-code the specific flag that is being checked.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If RQF_IO_STAT is set, then accounting is enabled. There's no need to
further gate this on req->part being set or not, RQF_IO_STAT should
never be set if accounting is not being done for this request.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Simply checking the rq_flags is enough to determine if accounting is
being done for this request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than have blk_do_io_stat() check for both RQF_IO_STAT and whether
the request is a passthrough requests every time, move both of those
checks into blk_account_io_start(). Then blk_do_io_stat() can be reduced
to just checking for RQF_IO_STAT.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
