summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-02powerpc/64s/exception: remove bad stack branchNicholas Piggin
The bad stack test in interrupt handlers has a few problems. For performance it is taken in the common case, which is a fetch bubble and a waste of i-cache. For code development and maintainence, it requires yet another stack frame setup routine, and that constrains all exception handlers to follow the same register save pattern which inhibits future optimisation. Remove the test/branch and replace it with a trap. Teach the program check handler to use the emergency stack for this case. This does not result in quite so nice a message, however the SRR0 and SRR1 of the crashed interrupt can be seen in r11 and r12, as is the original r1 (adjusted by INT_FRAME_SIZE). These are the most important parts to debugging the issue. The original r9-12 and cr0 is lost, which is the main downside. kernel BUG at linux/arch/powerpc/kernel/exceptions-64s.S:847! Oops: Exception in kernel mode, sig: 5 [#1] BE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted NIP: c000000000009108 LR: c000000000cadbcc CTR: c0000000000090f0 REGS: c0000000fffcbd70 TRAP: 0700 Not tainted MSR: 9000000000021032 <SF,HV,ME,IR,DR,RI> CR: 28222448 XER: 20040000 CFAR: c000000000009100 IRQMASK: 0 GPR00: 000000000000003d fffffffffffffd00 c0000000018cfb00 c0000000f02b3166 GPR04: fffffffffffffffd 0000000000000007 fffffffffffffffb 0000000000000030 GPR08: 0000000000000037 0000000028222448 0000000000000000 c000000000ca8de0 GPR12: 9000000002009032 c000000001ae0000 c000000000010a00 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c0000000f00322c0 c000000000f85200 0000000000000004 ffffffffffffffff GPR24: fffffffffffffffe 0000000000000000 0000000000000000 000000000000000a GPR28: 0000000000000000 0000000000000000 c0000000f02b391c c0000000f02b3167 NIP [c000000000009108] decrementer_common+0x18/0x160 LR [c000000000cadbcc] .vsnprintf+0x3ec/0x4f0 Call Trace: Instruction dump: 996d098a 994d098b 38610070 480246ed 48005518 60000000 38200000 718a4000 7c2a0b78 3821fd00 41c20008 e82d0970 <0981fd00> f92101a0 f9610170 f9810178 Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/tm: update comment about interrupt re-entrancyNicholas Piggin
Since the system reset interrupt began to use its own stack, and machine check interrupts have done so for some time, r1 can be changed without clearing MSR[RI], provided no other interrupts (including SLB misses) are taken. MSR[RI] does have to be cleared when using SCRATCH0, however. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move SET_SCRATCH0 into EXCEPTION_PROLOG_0Nicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: denorm handler use standard scratch save macroNicholas Piggin
Although the 0x1500 interrupt only applies to bare metal, it is better to just use the standard macro for scratch save. Runtime code path remains unchanged (due to instruction patching). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: machine check use standard macros to save dar/dsisrNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: add dar and dsisr options to exception macroNicholas Piggin
Some exception entry requires DAR and/or DSISR to be saved into the paca exception save area. Add options to the standard exception macros for these. Generated code changes slightly due to code structure. - 554: a6 02 72 7d mfdsisr r11 - 558: a8 00 4d f9 std r10,168(r13) - 55c: b0 00 6d 91 stw r11,176(r13) + 554: a8 00 4d f9 std r10,168(r13) + 558: a6 02 52 7d mfdsisr r10 + 55c: b0 00 4d 91 stw r10,176(r13) Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: use common macro for windupNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: shuffle windup code aroundNicholas Piggin
Restore all SPRs and CR up-front, these are longer latency instructions. Move register restore around to maximise pairs of adjacent loads (e.g., restore r0 next to r1). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: simplify hmi windup codeNicholas Piggin
Duplicate the hmi windup code for both cases, rather than to put a special case branch in the middle of it. Remove unused label. This helps with later code consolidation. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move machine check windup in_mce handlingNicholas Piggin
Move in_mce decrement earlier before registers are restored (but still after RI=0). This helps with later consolidation. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: windup use r9 consistently to restore SPRsNicholas Piggin
Trivial code change, r3->r9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: mtmsrd L=1 cleanupNicholas Piggin
All supported 64s CPUs support mtmsrd L=1 instruction, so a cleanup can be made in sreset and mce handlers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: avoid SPR RAW scoreboard stall in real mode entryNicholas Piggin
Move SPR reads ahead of writes. Real mode entry that is not a KVM guest is rare these days, but bad practice propagates. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: clean up system call entryNicholas Piggin
syscall / hcall entry unnecessarily differs between KVM and non-KVM builds. Move the SMT priority instruction to the same location (after INTERRUPT_TO_KERNEL). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move paca save area offsets into exception-64s.SNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove pointless EXCEPTION_PROLOG macro indirectionNicholas Piggin
No generated code change. Final vmlinux is changed only due to change in bug table line numbers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: generate regs clear instructions using .reptNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: fix indenting irregularitiesNicholas Piggin
Generally, macros that result in instructions being expanded are indented by a tab, and those that don't have no indent. Fix the obvious cases that go contrary to style. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: use a gas macro for system call handler codeNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove unused BRANCH_TO_COMMONNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove __BRANCH_TO_KVMNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move head-64.h code to exception-64s.S where it is usedNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move exception-64s.h code to exception-64s.S where it ↵Nicholas Piggin
is used No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move KVM related code togetherNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove STD_EXCEPTION_COMMON variantsNicholas Piggin
These are only called in one place each. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move EXCEPTION_PROLOG_2* to a more logical placeNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: improve 0x500 handler codeNicholas Piggin
After the previous cleanup, it becomes possible to consolidate some common code outside the runtime alternate patching. Also remove unused labels. This results in some code change, but unchanged runtime instruction sequence. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: unwind exception-64s.h macrosNicholas Piggin
Many of these macros just specify 1-4 lines which are only called a few times each at most, and often just once. Remove this indirection. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: Move EXCEPTION_COMMON additions into callersNicholas Piggin
More cases of code insertion via macros that does not add a great deal. All the additions have to be specified in the macro arguments, so they can just as well go after the macro. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: Move EXCEPTION_COMMON handler and return branches ↵Nicholas Piggin
into callers The aim is to reduce the amount of indirection it takes to get through the exception handler macros, particularly where it provides little code sharing. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: Make EXCEPTION_PROLOG_0 a gas macro for consistency ↵Nicholas Piggin
with others No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: KVM handler can set the HSRR trap bitNicholas Piggin
Move the KVM trap HSRR bit into the KVM handler, which can be conditionally applied when hsrr parameter is set. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: merge KVM handler and skip variantsNicholas Piggin
Conditionally expand the skip case if it is specified. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: consolidate maskable and non-maskable prologsNicholas Piggin
Conditionally expand the soft-masking test if a mask is passed in. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove the "extra" macro parameterNicholas Piggin
Rather than pass in the soft-masking and KVM tests via macro that is passed to another macro to expand it, switch to usig gas macros and conditionally expand the soft-masking and KVM tests. The system reset with its idle test is open coded as it is a one-off. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: fix sreset KVM test codeNicholas Piggin
The sreset handler KVM test theoretically should not depend on P7. In practice KVM now only supports P7 and up so no real bug fix, but this change is made now so the quirk is not propagated through cleanup patches. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move and tidy EXCEPTION_PROLOG_2 variantsNicholas Piggin
- Re-name the macros to _REAL and _VIRT suffixes rather than no and _RELON suffix. - Move the macro definitions together in the file. - Move RELOCATABLE ifdef inside the _VIRT macro. Further consolidation between variants does not buy much here. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: consolidate EXCEPTION_PROLOG_2 with _NORI variantNicholas Piggin
Switch to a gas macro that conditionally expands the RI clearing instruction. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove H concatenation for EXC_HV variantsNicholas Piggin
Replace all instances of this with gas macros that test the hsrr parameter and use the appropriate register names / labels. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Remove extraneous 2nd check for 0xea0 in SOFTEN_TEST] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02xfrm: remove a duplicated assignmentCong Wang
Fixes: 30846090a746 ("xfrm: policy: add sequence count to sync with hash resize") Cc: Florian Westphal <fw@strlen.de> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-07-02HID: Add another Primax PIXART OEM mouse quirkSebastian Parschauer
The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this Alienware branded Primax mouse as well. Daniel Schepler (@dschepler) reported and tested the quirk. Reference: https://github.com/sriemer/fix-linux-mouse/issues/15 Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-07-02powerpc/64s/exception: Remove unused SOFTEN_VALUE_0x980Michael Ellerman
Remove SOFTEN_VALUE_0x980, it's been unused since commit dabe859ec636 ("powerpc: Give hypervisor decrementer interrupts their own handler") (Sep 2012). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02HID: wacom: generic: add touchring adjustment for 2nd Gen Pro SmallAaron Armstrong Skomra
Add the product ID for the 2nd Generation Intuos Pro Small to the touchring coordinate adjustment block. Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-07-02docs: hid: convert to ReSTMauro Carvalho Chehab
Rename the HID documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. While here, fix the sysfs example from hid-sensor.txt, that has a lot of "?" instead of the proper UTF-8 characters that are produced by the tree command. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-07-02x86/entry/64: Fix and clean up paranoid_exitAndy Lutomirski
paranoid_exit needs to restore CR3 before GSBASE. Doing it in the opposite order crashes if the exception came from a context with user GSBASE and user CR3 -- RESTORE_CR3 cannot resture user CR3 if run with user GSBASE. This results in infinitely recursing exceptions if user code does SYSENTER with TF set if both FSGSBASE and PTI are enabled. The old code worked if user code just set TF without SYSENTER because #DB from user mode is special cased in idtentry and paranoid_exit doesn't run. Fix it by cleaning up the spaghetti code. All that paranoid_exit needs to do is to disable IRQs, handle IRQ tracing, then restore CR3, and restore GSBASE. Simply do those actions in that order. Fixes: 708078f65721 ("x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit") Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Link: https://lkml.kernel.org/r/59725ceb08977359489fbed979716949ad45f616.1562035429.git.luto@kernel.org
2019-07-02x86/entry/64: Don't compile ignore_sysret if 32-bit emulation is enabledAndy Lutomirski
It's only used if !CONFIG_IA32_EMULATION, so disable it in normal configs. This will save a few bytes of text and reduce confusion. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "BaeChang Seok" <chang.seok.bae@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Bae, Chang Seok" <chang.seok.bae@intel.com> Link: https://lkml.kernel.org/r/0f7dafa72fe7194689de5ee8cfe5d83509fabcf5.1562035429.git.luto@kernel.org
2019-07-02selftests/x86: Test SYSCALL and SYSENTER manually with TF setAndy Lutomirski
Make sure that both variants of the nasty TF-in-compat-syscall are exercised regardless of what vendor's CPU is running the tests. Also change the intentional signal after SYSCALL to use ud2, which is a lot more comprehensible. This crashes the kernel due to an FSGSBASE bug right now. This test *also* detects a bug in KVM when run on an Intel host. KVM people, feel free to use it to help debug. There's a bunch of code in this test to warn instead of going into an infinite looping when the bug gets triggered. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "BaeChang Seok" <chang.seok.bae@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: "Bae, Chang Seok" <chang.seok.bae@intel.com> Link: https://lkml.kernel.org/r/5f5de10441ab2e3005538b4c33be9b1965d1bb63.1562035429.git.luto@kernel.org
2019-07-02rslib: Make some functions staticYueHaibing
Fix sparse warnings: lib/reed_solomon/test_rslib.c:313:5: warning: symbol 'ex_rs_helper' was not declared. Should it be static? lib/reed_solomon/test_rslib.c:349:5: warning: symbol 'exercise_rs' was not declared. Should it be static? lib/reed_solomon/test_rslib.c:407:5: warning: symbol 'exercise_rs_bc' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <ferdinand.blomqvist@gmail.com> Link: https://lkml.kernel.org/r/20190702061847.26060-1-yuehaibing@huawei.com
2019-07-01Merge branch 'Add-gve-driver'David S. Miller
Catherine Sullivan says: ==================== Add gve driver This patch series adds the gve driver which will support the Compute Engine Virtual NIC that will be available in the future. v2: - Patch 1: - Remove gve_size_assert.h and use static_assert instead. - Loop forever instead of bugging if the device won't reset - Use module_pci_driver - Patch 2: - Use be16_to_cpu in the RX Seq No define - Remove unneeded ndo_change_mtu - Patch 3: - No Changes - Patch 4: - Instead of checking netif_carrier_ok in ethtool stats, just make sure v3: - Patch 1: - Remove X86 dep - Patch 2: - No changes - Patch 3: - No changes - Patch 4: - Remove unneeded memsets in ethtool stats v4: - Patch 1: - Use io[read|write]32be instead of [read|write]l(cpu_to_be32()) - Explicitly add padding to gve_adminq_set_driver_parameter - Use static where appropriate - Patch 2: - Use u64_stats_sync - Explicity add padding to gve_adminq_create_rx_queue - Fix some enianness typing issues found by kbuild - Use static where appropriate - Remove unused variables - Patch 3: - Use io[read|write]32be instead of [read|write]l(cpu_to_be32()) - Patch 4: - Use u64_stats_sync - Use static where appropriate Warnings reported by: Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01gve: Add ethtool supportCatherine Sullivan
Add support for the following ethtool commands: ethtool -s|--change devname [msglvl N] [msglevel type on|off] ethtool -S|--statistics devname ethtool -i|--driver devname ethtool -l|--show-channels devname ethtool -L|--set-channels devname ethtool -g|--show-ring devname ethtool --reset devname Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: Sagi Shahar <sagis@google.com> Signed-off-by: Jon Olson <jonolson@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Luigi Rizzo <lrizzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 12:30:20 +0000