summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-23arm64: dts: renesas: r8a779h0: Add MSIOF nodesThanh Quan
Add device nodes for the Clock-Synchronized Serial Interfaces with FIFO (MSIOF) on the Renesas R-Car V4M (R8A779H0) SoC. Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/62d2a1424cabda06c53541d93f6a1a5110267a71.1713280753.git.geert+renesas@glider.be
2024-04-23netfs: Fix writethrough-mode error handlingDavid Howells
Fix the error return in netfs_perform_write() acting in writethrough-mode to return any cached error in the case that netfs_end_writethrough() returns 0. This can affect the use of O_SYNC/O_DSYNC/RWF_SYNC/RWF_DSYNC in 9p and afs. Fixes: 41d8e7673a77 ("netfs: Implement a write-through caching option") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/6736.1713343639@warthog.procyon.org.uk Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-04-23ntfs3: add legacy ntfs file operationsChristian Brauner
To ensure that ioctl()s can't be used to circumvent write restrictions. Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-04-23ntfs3: enforce read-only when used as legacy ntfs driverChristian Brauner
Ensure that ntfs3 is mounted read-only when it is used to provide the legacy ntfs driver. Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-04-23powerpc/pseries/iommu: LPAR panics during boot up with a frozen PEGaurav Batra
At the time of LPAR boot up, partition firmware provides Open Firmware property ibm,dma-window for the PE. This property is provided on the PCI bus the PE is attached to. There are execptions where the partition firmware might not provide this property for the PE at the time of LPAR boot up. One of the scenario is where the firmware has frozen the PE due to some error condition. This PE is frozen for 24 hours or unless the whole system is reinitialized. Within this time frame, if the LPAR is booted, the frozen PE will be presented to the LPAR but ibm,dma-window property could be missing. Today, under these circumstances, the LPAR oopses with NULL pointer dereference, when configuring the PCI bus the PE is attached to. BUG: Kernel NULL pointer dereference on read at 0x000000c8 Faulting instruction address: 0xc0000000001024c0 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: Supported: Yes CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-150600.9-default #1 Hardware name: IBM,9043-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_023) hv:phyp pSeries NIP: c0000000001024c0 LR: c0000000001024b0 CTR: c000000000102450 REGS: c0000000037db5c0 TRAP: 0300 Not tainted (6.4.0-150600.9-default) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000822 XER: 00000000 CFAR: c00000000010254c DAR: 00000000000000c8 DSISR: 00080000 IRQMASK: 0 ... NIP [c0000000001024c0] pci_dma_bus_setup_pSeriesLP+0x70/0x2a0 LR [c0000000001024b0] pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 Call Trace: pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 (unreliable) pcibios_setup_bus_self+0x1c0/0x370 __of_scan_bus+0x2f8/0x330 pcibios_scan_phb+0x280/0x3d0 pcibios_init+0x88/0x12c do_one_initcall+0x60/0x320 kernel_init_freeable+0x344/0x3e4 kernel_init+0x34/0x1d0 ret_from_kernel_user_thread+0x14/0x1c Fixes: b1fc44eaa9ba ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window") Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240422205141.10662-1-gbatra@linux.ibm.com
2024-04-23regulator: change stubbed devm_regulator_get_enable to return OkMatti Vaittinen
The devm_regulator_get_enable() should be a 'call and forget' API, meaning, when it is used to enable the regulators, the API does not provide a handle to do any further control of the regulators. It gives no real benefit to return an error from the stub if CONFIG_REGULATOR is not set. On the contrary, returning and error is causing problems to drivers when hardware is such it works out just fine with no regulator control. Returning an error forces drivers to specifically handle the case where CONFIG_REGULATOR is not set, making the mere existence of the stub questionalble. Furthermore, the stub of the regulator_enable() seems to be returning Ok. Change the stub implementation for the devm_regulator_get_enable() to return Ok so drivers do not separately handle the case where the CONFIG_REGULATOR is not set. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reported-by: Aleksander Mazur <deweloper@wp.pl> Suggested-by: Guenter Roeck <linux@roeck-us.net> Fixes: da279e6965b3 ("regulator: Add devm helpers for get and enable") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/ZiYF6d1V1vSPcsJS@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-23ASoC: cs35l56: Avoid static analysis warning of uninitialised variableSimon Trimmer
Static checkers complain that the silicon_uid variable passed by pointer to cs35l56_read_silicon_uid() could later be used uninitialised when calling cs_amp_get_efi_calibration_data(). cs35l56_read_silicon_uid() must have succeeded to call cs_amp_get_efi_calibration_data() and that would have populated the variable. However, initialise the value so we are not haunted by it forevermore. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240422103211.236063-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-22io_uring/notif: implement notification stackingPavel Begunkov
The network stack allows only one ubuf_info per skb, and unlike MSG_ZEROCOPY, each io_uring zerocopy send will carry a separate ubuf_info. That means that send requests can't reuse a previosly allocated skb and need to get one more or more of new ones. That's fine for large sends, but otherwise it would spam the stack with lots of skbs carrying just a little data each. To help with that implement linking notification (i.e. an io_uring wrapper around ubuf_info) into a list. Each is refcounted by skbs and the stack as usual. additionally all non head entries keep a reference to the head, which they put down when their refcount hits 0. When the head have no more users, it'll efficiently put all notifications in a batch. As mentioned previously about ->io_link_skb, the callback implementation always allows to bind to an skb without a ubuf_info. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/bf1e7f9b72f9ecc99999fdc0d2cded5eea87fd0b.1713369317.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-22io_uring/notif: simplify io_notif_flush()Pavel Begunkov
io_notif_flush() is partially duplicating io_tx_ubuf_complete(), so instead of duplicating it, make the flush call io_tx_ubuf_complete. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/19e41652c16718b946a5c80d2ad409df7682e47e.1713369317.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-22Merge branch 'for-uring-ubufops' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linux into for-6.10/io_uring Merge net changes required for the upcoming send zerocopy improvements. * 'for-uring-ubufops' of git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linux: net: add callback for setting a ubuf_info to skb net: extend ubuf_info callback to ops structure Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-22Merge tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: "Five ksmbd server fixes, most also for stable: - rename fix - two fixes for potential out of bounds - fix for connections from MacOS (padding in close response) - fix for when to enable persistent handles" * tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: add continuous availability share parameter ksmbd: common: use struct_group_attr instead of struct_group for network_open_info ksmbd: clear RENAME_NOREPLACE before calling vfs_rename ksmbd: validate request buffer size in smb2_allocate_rsp_buf() ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
2024-04-22net: add callback for setting a ubuf_info to skbPavel Begunkov
At the moment an skb can only have one ubuf_info associated with it, which might be a performance problem for zerocopy sends in cases like TCP via io_uring. Add a callback for assigning ubuf_info to skb, this way we will implement smarter assignment later like linking ubuf_info together. Note, it's an optional callback, which should be compatible with skb_zcopy_set(), that's because the net stack might potentially decide to clone an skb and take another reference to ubuf_info whenever it wishes. Also, a correct implementation should always be able to bind to an skb without prior ubuf_info, otherwise we could end up in a situation when the send would not be able to progress. Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/all/b7918aadffeb787c84c9e72e34c729dc04f3a45d.1713369317.git.asml.silence@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22net: extend ubuf_info callback to ops structurePavel Begunkov
We'll need to associate additional callbacks with ubuf_info, introduce a structure holding ubuf_info callbacks. Apart from a more smarter io_uring notification management introduced in next patches, it can be used to generalise msg_zerocopy_put_abort() and also store ->sg_from_iter, which is currently passed in struct msghdr. Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/all/a62015541de49c0e2a8a0377a1d5d0a5aeb07016.1713369317.git.asml.silence@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICEMiguel Ojeda
When KUnit tests are enabled, under very big kernel configurations (e.g. `allyesconfig`), we can trigger a `rustdoc` ICE [1]: RUSTDOC TK rust/kernel/lib.rs error: the compiler unexpectedly panicked. this is a bug. The reason is that this build step has a duplicated `@rustc_cfg` argument, which contains the kernel configuration, and thus a lot of arguments. The factor 2 happens to be enough to reach the ICE. Thus remove the unneeded `@rustc_cfg`. By doing so, we clean up the command and workaround the ICE. The ICE has been fixed in the upcoming Rust 1.79 [2]. Cc: stable@vger.kernel.org Fixes: a66d733da801 ("rust: support running Rust documentation tests as KUnit ones") Link: https://github.com/rust-lang/rust/issues/122722 [1] Link: https://github.com/rust-lang/rust/pull/122840 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240422091215.526688-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-04-23rust: kernel: require `Send` for `Module` implementationsWedson Almeida Filho
The thread that calls the module initialisation code when a module is loaded is not guaranteed [in fact, it is unlikely] to be the same one that calls the module cleanup code on module unload, therefore, `Module` implementations must be `Send` to account for them moving from one thread to another implicitly. Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Cc: stable@vger.kernel.org # 6.8.x: df70d04d5697: rust: phy: implement `Send` for `Registration` Cc: stable@vger.kernel.org Fixes: 247b365dc8dc ("rust: add `kernel` crate") Link: https://lore.kernel.org/r/20240328195457.225001-3-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-04-23rust: phy: implement `Send` for `Registration`Wedson Almeida Filho
In preparation for requiring `Send` for `Module` implementations in the next patch. Cc: FUJITA Tomonori <fujita.tomonori@gmail.com> Cc: Trevor Gross <tmgross@umich.edu> Cc: netdev@vger.kernel.org Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240328195457.225001-2-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-04-22NFC: trf7970a: disable all regulators on removalPaul Geurts
During module probe, regulator 'vin' and 'vdd-io' are used and enabled, but the vdd-io regulator overwrites the 'vin' regulator pointer. During remove, only the vdd-io is disabled, as the vin regulator pointer is not available anymore. When regulator_put() is called during resource cleanup a kernel warning is given, as the regulator is still enabled. Store the two regulators in separate pointers and disable both the regulators on module remove. Fixes: 49d22c70aaf0 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage") Signed-off-by: Paul Geurts <paul_geurts@live.nl> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22MAINTAINERS: eth: mark IBM eHEA as an OrphanDavid Christensen
Current maintainer Douglas Miller has left IBM and no replacement has been assigned for the driver. The eHEA hardware was last used on IBM POWER7 systems, the last of which reached end-of-support at the end of 2020. Signed-off-by: David Christensen <drc@linux.ibm.com> Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lore.kernel.org/r/20240418195517.528577-1-drc@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22vDPA: code clean for vhost_vdpa uapiZhu Lingshan
This commit cleans up the uapi for vhost_vdpa by better naming some of the enums which report blk information to user space, and they are not in any official releases yet. Fixes: 1ac61ddfee93 ("vDPA: report virtio-blk flush info to user space") Fixes: ae1374b7f72c ("vDPA: report virtio-block read-only info to user space") Fixes: 330b8aea6924 ("vDPA: report virtio-block max segment size to user space") Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Message-Id: <20240415111047.1047774-1-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-04-22Merge tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: "Nothing too crazy in this one, and it looks like (fingers crossed) the recovery and repair issues are settling down - although there's going to be a long tail there, as we've still yet to really ramp up on error injection or syzbot. - fix a few more deadlocks in recovery - fix u32/u64 issues in mi_btree_bitmap - btree key cache shrinker now actually frees, with more instrumentation coming so we can verify that it's working correctly more easily in the future" * tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefs: bcachefs: If we run merges at a lower watermark, they must be nonblocking bcachefs: Fix inode early destruction path bcachefs: Fix deadlock in journal write path bcachefs: Tweak btree key cache shrinker so it actually frees bcachefs: bkey_cached.btree_trans_barrier_seq needs to be a ulong bcachefs: Fix missing call to bch2_fs_allocator_background_exit() bcachefs: Check for journal entries overruning end of sb clean section bcachefs: Fix bio alloc in check_extent_checksum() bcachefs: fix leak in bch2_gc_write_reflink_key bcachefs: KEY_TYPE_error is allowed for reflink bcachefs: Fix bch2_dev_btree_bitmap_marked_sectors() shift bcachefs: make sure to release last journal pin in replay bcachefs: node scan: ignore multiple nodes with same seq if interior bcachefs: Fix format specifier in validate_bset_keys() bcachefs: Fix null ptr deref in twf from BCH_IOCTL_FSCK_OFFLINE
2024-04-22net: dsa: mv88e6xx: fix supported_interfaces setup in ↵Matthias Schiffer
mv88e6250_phylink_get_caps() With the recent PHYLINK changes requiring supported_interfaces to be set, MV88E6250 family switches like the 88E6020 fail to probe - cmode is never initialized on these devices, so mv88e6250_phylink_get_caps() does not set any supported_interfaces flags. Instead of a cmode, on 88E6250 we have a read-only port mode value that encodes similar information. There is no reason to bother mapping port mode to the cmodes of other switch models; instead we introduce a mv88e6250_setup_supported_interfaces() that is called directly from mv88e6250_phylink_get_caps(). Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20240417103737.166651-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22Merge tag 'nfsd-6.9-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix an NFS/RDMA performance regression in v6.9-rc * tag 'nfsd-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: Revert "svcrdma: Add Write chunk WRs to the RPC's Send WR chain"
2024-04-22Merge tag 'qcom-clk-fixes-for-6.9' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-fixes Pull Qualcomm clk driver fixes from Bjorn Andersson: The introduction of support for the external VDD_GFX supply in SA8295P ADP unearthed a lockdep problem in the GDSC code w.r.t regulator supplies. Make the regulator optional, to avoid creating a dummy regulator, on those boards that doesn't use this. While not solving the root cause of the problem, it reduces the impact of the lockdep warning - and it avoids wasting resources. Refactoring of the RPM clock driver accidentally removed num_clks from msm8976. Reintroduce this to get the clocks back. * tag 'qcom-clk-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: clk: qcom: smd-rpm: Restore msm8976 num_clk clk: qcom: gdsc: treat optional supplies as optional
2024-04-22io_uring/net: support bundles for recvJens Axboe
If IORING_OP_RECV is used with provided buffers, the caller may also set IORING_RECVSEND_BUNDLE to turn it into a multi-buffer recv. This grabs buffers available and receives into them, posting a single completion for all of it. This can be used with multishot receive as well, or without it. Now that both send and receive support bundles, add a feature flag for it as well. If IORING_FEAT_RECVSEND_BUNDLE is set after registering the ring, then the kernel supports bundles for recv and send. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-22io_uring/net: support bundles for sendJens Axboe
If IORING_OP_SEND is used with provided buffers, the caller may also set IORING_RECVSEND_BUNDLE to turn it into a multi-buffer send. The idea is that an application can fill outgoing buffers in a provided buffer group, and then arm a single send that will service them all. Once there are no more buffers to send, or if the requested length has been sent, the request posts a single completion for all the buffers. This only enables it for IORING_OP_SEND, IORING_OP_SENDMSG is coming in a separate patch. However, this patch does do a lot of the prep work that makes wiring up the sendmsg variant pretty trivial. They share the prep side. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-22io_uring/kbuf: add helpers for getting/peeking multiple buffersJens Axboe
Our provided buffer interface only allows selection of a single buffer. Add an API that allows getting/peeking multiple buffers at the same time. This is only implemented for the ring provided buffers. It could be added for the legacy provided buffers as well, but since it's strongly encouraged to use the new interface, let's keep it simpler and just provide it for the new API. The legacy interface will always just select a single buffer. There are two new main functions: io_buffers_select(), which selects up as many buffers as it can. The caller supplies the iovec array, and io_buffers_select() may allocate a bigger array if the 'out_len' being passed in is non-zero and bigger than what fits in the provided iovec. Buffers grabbed with this helper are permanently assigned. io_buffers_peek(), which works like io_buffers_select(), except they can be recycled, if needed. Callers using either of these functions should call io_put_kbufs() rather than io_put_kbuf() at completion time. The peek interface must be called with the ctx locked from peek to completion. This add a bit state for the request: - REQ_F_BUFFERS_COMMIT, which means that the the buffers have been peeked and should be committed to the buffer ring head when they are put as part of completion. Prior to this, req->buf_list was cleared to NULL when committed. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-22io_uring/net: add provided buffer support for IORING_OP_SENDJens Axboe
It's pretty trivial to wire up provided buffer support for the send side, just like how it's done the receive side. This enables setting up a buffer ring that an application can use to push pending sends to, and then have a send pick a buffer from that ring. One of the challenges with async IO and networking sends is that you can get into reordering conditions if you have more than one inflight at the same time. Consider the following scenario where everything is fine: 1) App queues sendA for socket1 2) App queues sendB for socket1 3) App does io_uring_submit() 4) sendA is issued, completes successfully, posts CQE 5) sendB is issued, completes successfully, posts CQE All is fine. Requests are always issued in-order, and both complete inline as most sends do. However, if we're flooding socket1 with sends, the following could also result from the same sequence: 1) App queues sendA for socket1 2) App queues sendB for socket1 3) App does io_uring_submit() 4) sendA is issued, socket1 is full, poll is armed for retry 5) Space frees up in socket1, this triggers sendA retry via task_work 6) sendB is issued, completes successfully, posts CQE 7) sendA is retried, completes successfully, posts CQE Now we've sent sendB before sendA, which can make things unhappy. If both sendA and sendB had been using provided buffers, then it would look as follows instead: 1) App queues dataA for sendA, queues sendA for socket1 2) App queues dataB for sendB queues sendB for socket1 3) App does io_uring_submit() 4) sendA is issued, socket1 is full, poll is armed for retry 5) Space frees up in socket1, this triggers sendA retry via task_work 6) sendB is issued, picks first buffer (dataA), completes successfully, posts CQE (which says "I sent dataA") 7) sendA is retried, picks first buffer (dataB), completes successfully, posts CQE (which says "I sent dataB") Now we've sent the data in order, and everybody is happy. It's worth noting that this also opens the door for supporting multishot sends, as provided buffers would be a prerequisite for that. Those can trigger either when new buffers are added to the outgoing ring, or (if stalled due to lack of space) when space frees up in the socket. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-22io_uring/net: add generic multishot retry helperJens Axboe
This is just moving io_recv_prep_retry() higher up so it can get used for sends as well, and rename it to be generically useful for both sends and receives. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-22xdp: use flags field to disambiguate broadcast redirectToke Høiland-Jørgensen
When redirecting a packet using XDP, the bpf_redirect_map() helper will set up the redirect destination information in struct bpf_redirect_info (using the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect() function will read this information after the XDP program returns and pass the frame on to the right redirect destination. When using the BPF_F_BROADCAST flag to do multicast redirect to a whole map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct bpf_redirect_info to point to the destination map to be broadcast. And xdp_do_redirect() reacts to the value of this map pointer to decide whether it's dealing with a broadcast or a single-value redirect. However, if the destination map is being destroyed before xdp_do_redirect() is called, the map pointer will be cleared out (by bpf_clear_redirect_map()) without waiting for any XDP programs to stop running. This causes xdp_do_redirect() to think that the redirect was to a single target, but the target pointer is also NULL (since broadcast redirects don't have a single target), so this causes a crash when a NULL pointer is passed to dev_map_enqueue(). To fix this, change xdp_do_redirect() to react directly to the presence of the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info to disambiguate between a single-target and a broadcast redirect. And only read the 'map' pointer if the broadcast flag is set, aborting if that has been cleared out in the meantime. This prevents the crash, while keeping the atomic (cmpxchg-based) clearing of the map pointer itself, and without adding any more checks in the non-broadcast fast path. Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support") Reported-and-tested-by: syzbot+af9492708df9797198d6@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20240418071840.156411-1-toke@redhat.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-04-22ACPI: CPPC: Fix access width used for PCC registersVanshidhar Konda
commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") modified cpc_read()/cpc_write() to use access_width to read CPC registers. However, for PCC registers the access width field in the ACPI register macro specifies the PCC subspace ID. For non-zero PCC subspace ID it is incorrectly treated as access width. This causes errors when reading from PCC registers in the CPPC driver. For PCC registers, base the size of read/write on the bit width field. The debug message in cpc_read()/cpc_write() is updated to print relevant information for the address space type used to read the register. Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com> Tested-by: Jarred White <jarredwhite@linux.microsoft.com> Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-22ACPI: CPPC: Fix bit_offset shift in MASK_VAL() macroJarred White
Commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") neglected to properly wrap the bit_offset shift when it comes to applying the mask. This may cause incorrect values to be read and may cause the cpufreq module not be loaded. [ 11.059751] cpu_capacity: CPU0 missing/invalid highest performance. [ 11.066005] cpu_capacity: partial information: fallback to 1024 for all CPUs Also, corrected the bitmask generation in GENMASK (extra bit being added). Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Reviewed-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-22Merge tag 'docs-6.9-fixes2' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A set of updates from Thorsten to his (new) guide to verifying bugs and tracking down regressions" * tag 'docs-6.9-fixes2' of git://git.lwn.net/linux: docs: verify/bisect: stable regressions: first stable, then mainline docs: verify/bisect: describe how to use a build host docs: verify/bisect: explain testing reverts, patches and newer code docs: verify/bisect: proper headlines and more spacing docs: verify/bisect: add and fetch stable branches ahead of time docs: verify/bisect: use git switch, tag kernel, and various fixes
2024-04-22x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handlerTom Lendacky
The MWAITX and MONITORX instructions generate the same #VC error code as the MWAIT and MONITOR instructions, respectively. Update the #VC handler opcode checking to also support the MWAITX and MONITORX opcodes. Fixes: e3ef461af35a ("x86/sev: Harden #VC instruction emulation somewhat") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/453d5a7cfb4b9fe818b6fb67f93ae25468bc9e23.1713793161.git.thomas.lendacky@amd.com
2024-04-22cxl/core: Fix potential payload size confusion in cxl_mem_get_poison()Dan Williams
A recent change to cxl_mem_get_records_log() [1] highlighted a subtle nuance of looping calls to cxl_internal_send_cmd(), i.e. that cxl_internal_send_cmd() modifies the 'size_out' member of the @mbox_cmd argument. That mechanism is useful for communicating underflow, but it is unwanted when reusing @mbox_cmd for a subsequent submission. It turns out that cxl_xfer_log() avoids this scenario by always redefining @mbox_cmd each iteration. Update cxl_mem_get_records_log() and cxl_mem_get_poison() to follow the same style as cxl_xfer_log(), i.e. re-define @mbox_cmd each iteration. The cxl_mem_get_records_log() change is just a style fixup, but the cxl_mem_get_poison() change is a potential fix, per Alison [2]: Poison list retrieval can hit this case if the MORE flag is set and a follow on read of the list delivers more records than the previous read. ie. device gives one record, sets the _MORE flag, then gives 5. Not an urgent fix since this behavior has not been seen in the wild, but worth tracking as a fix. Cc: Kwangjin Ko <kwangjin.ko@sk.com> Cc: Alison Schofield <alison.schofield@intel.com> Fixes: ed83f7ca398b ("cxl/mbox: Add GET_POISON_LIST mailbox command") Link: http://lore.kernel.org/r/20240402081404.1106-2-kwangjin.ko@sk.com [1] Link: http://lore.kernel.org/r/ZhAhAL/GOaWFrauw@aschofie-mobl2 [2] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Link: https://lore.kernel.org/r/171235441633.2716581.12330082428680958635.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2024-04-22cifs: reinstate original behavior again for forceuid/forcegidTakayuki Nagata
forceuid/forcegid should be enabled by default when uid=/gid= options are specified, but commit 24e0a1eff9e2 ("cifs: switch to new mount api") changed the behavior. Due to the change, a mounted share does not show intentional uid/gid for files and directories even though uid=/gid= options are specified since forceuid/forcegid are not enabled. This patch reinstates original behavior that overrides uid/gid with specified uid/gid by the options. Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Signed-off-by: Takayuki Nagata <tnagata@redhat.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-04-22 fs/9p: mitigate inode collisionsEric Van Hensbergen
Detect and mitigate inode collsions that now occur since we fixed 9p generating duplicate inode structures. Underlying cause of these appears to be a race condition between reuse of inode numbers in underlying file system and cleanup of inode numbers in the client. Enabling caching makes this much more likely to happen as it increases cleanup latency due to writebacks. Reported-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2024-04-22arm32, bpf: Reimplement sign-extension mov instructionPuranjay Mohan
The current implementation of the mov instruction with sign extension has the following problems: 1. It clobbers the source register if it is not stacked because it sign extends the source and then moves it to the destination. 2. If the dst_reg is stacked, the current code doesn't write the value back in case of 64-bit mov. 3. There is room for improvement by emitting fewer instructions. The steps for fixing this and the instructions emitted by the JIT are explained below with examples in all combinations: Case A: offset == 32: ===================== Case A.1: src and dst are stacked registers: -------------------------------------------- 1. Load src_lo into tmp_lo 2. Store tmp_lo into dst_lo 3. Sign extend tmp_lo into tmp_hi 4. Store tmp_hi to dst_hi Example: r3 = (s32)r3 r3 is a stacked register ldr r6, [r11, #-16] // Load r3_lo into tmp_lo // str to dst_lo is not emitted because src_lo == dst_lo asr r7, r6, #31 // Sign extend tmp_lo into tmp_hi str r7, [r11, #-12] // Store tmp_hi into r3_hi Case A.2: src is stacked but dst is not: ---------------------------------------- 1. Load src_lo into dst_lo 2. Sign extend dst_lo into dst_hi Example: r6 = (s32)r3 r6 maps to {ARM_R5, ARM_R4} and r3 is stacked ldr r4, [r11, #-16] // Load r3_lo into r6_lo asr r5, r4, #31 // Sign extend r6_lo into r6_hi Case A.3: src is not stacked but dst is stacked: ------------------------------------------------ 1. Store src_lo into dst_lo 2. Sign extend src_lo into tmp_hi 3. Store tmp_hi to dst_hi Example: r3 = (s32)r6 r3 is stacked and r6 maps to {ARM_R5, ARM_R4} str r4, [r11, #-16] // Store r6_lo to r3_lo asr r7, r4, #31 // Sign extend r6_lo into tmp_hi str r7, [r11, #-12] // Store tmp_hi to dest_hi Case A.4: Both src and dst are not stacked: ------------------------------------------- 1. Mov src_lo into dst_lo 2. Sign extend src_lo into dst_hi Example: (bf) r6 = (s32)r6 r6 maps to {ARM_R5, ARM_R4} // Mov not emitted because dst == src asr r5, r4, #31 // Sign extend r6_lo into r6_hi Case B: offset != 32: ===================== Case B.1: src and dst are stacked registers: -------------------------------------------- 1. Load src_lo into tmp_lo 2. Sign extend tmp_lo according to offset. 3. Store tmp_lo into dst_lo 4. Sign extend tmp_lo into tmp_hi 5. Store tmp_hi to dst_hi Example: r9 = (s8)r3 r9 and r3 are both stacked registers ldr r6, [r11, #-16] // Load r3_lo into tmp_lo lsl r6, r6, #24 // Sign extend tmp_lo asr r6, r6, #24 // .. str r6, [r11, #-56] // Store tmp_lo to r9_lo asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi str r7, [r11, #-52] // Store tmp_hi to r9_hi Case B.2: src is stacked but dst is not: ---------------------------------------- 1. Load src_lo into dst_lo 2. Sign extend dst_lo according to offset. 3. Sign extend tmp_lo into dst_hi Example: r6 = (s8)r3 r6 maps to {ARM_R5, ARM_R4} and r3 is stacked ldr r4, [r11, #-16] // Load r3_lo to r6_lo lsl r4, r4, #24 // Sign extend r6_lo asr r4, r4, #24 // .. asr r5, r4, #31 // Sign extend r6_lo into r6_hi Case B.3: src is not stacked but dst is stacked: ------------------------------------------------ 1. Sign extend src_lo into tmp_lo according to offset. 2. Store tmp_lo into dst_lo. 3. Sign extend src_lo into tmp_hi. 4. Store tmp_hi to dst_hi. Example: r3 = (s8)r1 r3 is stacked and r1 maps to {ARM_R3, ARM_R2} lsl r6, r2, #24 // Sign extend r1_lo to tmp_lo asr r6, r6, #24 // .. str r6, [r11, #-16] // Store tmp_lo to r3_lo asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi str r7, [r11, #-12] // Store tmp_hi to r3_hi Case B.4: Both src and dst are not stacked: ------------------------------------------- 1. Sign extend src_lo into dst_lo according to offset. 2. Sign extend dst_lo into dst_hi. Example: r6 = (s8)r1 r6 maps to {ARM_R5, ARM_R4} and r1 maps to {ARM_R3, ARM_R2} lsl r4, r2, #24 // Sign extend r1_lo to r6_lo asr r4, r4, #24 // .. asr r5, r4, #31 // Sign extend r6_lo to r6_hi Fixes: fc832653fa0d ("arm32, bpf: add support for sign-extension mov instruction") Reported-by: syzbot+186522670e6722692d86@syzkaller.appspotmail.com Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Closes: https://lore.kernel.org/all/000000000000e9a8d80615163f2a@google.com Link: https://lore.kernel.org/bpf/20240419182832.27707-1-puranjay@kernel.org
2024-04-22fuse: verify zero padding in fuse_backing_mapAmir Goldstein
To allow us extending the interface in the future. Fixes: 44350256ab94 ("fuse: implement ioctls to manage backing files") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-04-22powerpc/pseries: make max polling consistent for longer H_CALLsNayna Jain
Currently, plpks_confirm_object_flushed() function polls for 5msec in total instead of 5sec. Keep max polling time consistent for all the H_CALLs, which take longer than expected, to be 5sec. Also, make use of fsleep() everywhere to insert delay. Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Fixes: 2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore") Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240418031230.170954-1-nayna@linux.ibm.com
2024-04-22Merge branch 'bnxt_en-aer-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: AER fixes This patchset fixes issues in the AER recovery logic. The first patch refactors the code to make a shutdown function available for AER fatal errors. The second patch fixes the AER fatal recovery logic. The third patch fixes the health register logic to fix AER recovery failure for the new P7 chips. ==================== Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
2024-04-22bnxt_en: Fix error recovery for 5760X (P7) chipsMichael Chan
During error recovery, such as AER fatal error slot reset, we call bnxt_try_map_fw_health_reg() to try to get access to the health register to determine the firmware state. Fix bnxt_try_map_fw_health_reg() to recognize the P7 chip correctly and set up the health register. This fixes this type of AER slot reset failure: bnxt_en 0000:04:00.0: AER: PCIe Bus Error: severity=Uncorrectable (Fatal), type=Inaccessible, (Unregistered Agent ID) bnxt_en 0000:04:00.0 enp4s0f0np0: PCI I/O error detected bnxt_en 0000:04:00.0 bnxt_re0: Handle device suspend call bnxt_en 0000:04:00.1 enp4s0f1np1: PCI I/O error detected bnxt_en 0000:04:00.1 bnxt_re1: Handle device suspend call pcieport 0000:00:02.0: AER: Root Port link has been reset (0) bnxt_en 0000:04:00.0 enp4s0f0np0: PCI Slot Reset bnxt_en 0000:04:00.0: enabling device (0000 -> 0002) bnxt_en 0000:04:00.0: Firmware not ready bnxt_en 0000:04:00.1 enp4s0f1np1: PCI Slot Reset bnxt_en 0000:04:00.1: enabling device (0000 -> 0002) bnxt_en 0000:04:00.1: Firmware not ready pcieport 0000:00:02.0: AER: device recovery failed Fixes: a432a45bdba4 ("bnxt_en: Define basic P7 macros") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22bnxt_en: Fix the PCI-AER routinesVikas Gupta
We do not support two simultaneous recoveries so check for reset flag, BNXT_STATE_IN_FW_RESET, and do not proceed with AER further. When the pci channel state is pci_channel_io_frozen, the PCIe link can not be trusted so we disable the traffic immediately and stop BAR access by calling bnxt_fw_fatal_close(). BAR access after AER fatal error can cause an NMI. Fixes: f75d9a0aa967 ("bnxt_en: Re-write PCI BARs after PCI fatal error.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22bnxt_en: refactor reset close codeVikas Gupta
Introduce bnxt_fw_fatal_close() API which can be used to stop data path and disable device when firmware is in fatal state. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22arm64: dts: qcom: qrb4210-rb1: add firmware-name qualifier to WiFi nodeDmitry Baryshkov
Add firmware-name property to the WiFi device tree node to specify board-specific lookup directory. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240306-wcn3990-firmware-path-v2-4-f89e98e71a57@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-22arm64: dts: qcom: qrb2210-rb1: add firmware-name qualifier to WiFi nodeDmitry Baryshkov
Add firmware-name property to the WiFi device tree node to specify board-specific lookup directory. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240306-wcn3990-firmware-path-v2-3-f89e98e71a57@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-22sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()Xuewen Yan
It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen. Closes: https://lore.kernel.org/all/ZhuYyrh3mweP_Kd8@nz.home/ Closes: https://lore.kernel.org/all/CA+9S74ih+45M_2TPUY_mPPVDhNvyYfy1J1ftSix+KjiTVxg8nw@mail.gmail.com/ Closes: https://lore.kernel.org/lkml/202401301012.2ed95df0-oliver.sang@intel.com/ Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight") Reported-by: Sergei Trofimovich <slyich@gmail.com> Reported-by: Igor Raits <igor@gooddata.com> Reported-by: Breno Leitao <leitao@debian.org> Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Yujie Liu <yujie.liu@intel.com> Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com> Reviewed-and-tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20240422082238.5784-1-xuewen.yan@unisoc.com
2024-04-22sched/eevdf: Fix miscalculation in reweight_entity() when se is not currTianchen Ding
reweight_eevdf() only keeps V unchanged inside itself. When se != cfs_rq->curr, it would be dequeued from rb tree first. So that V is changed and the result is wrong. Pass the original V to reweight_eevdf() to fix this issue. Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight") Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com> [peterz: flip if() condition for clarity] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Abel Wu <wuyun.abel@bytedance.com> Link: https://lkml.kernel.org/r/20240306022133.81008-3-dtcccc@linux.alibaba.com
2024-04-22sched/eevdf: Always update V if se->on_rq when reweightingTianchen Ding
reweight_eevdf() needs the latest V to do accurate calculation for new ve and vd. So update V unconditionally when se is runnable. Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight") Suggested-by: Abel Wu <wuyun.abel@bytedance.com> Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Abel Wu <wuyun.abel@bytedance.com> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Tested-by: Chen Yu <yu.c.chen@intel.com> Link: https://lore.kernel.org/r/20240306022133.81008-2-dtcccc@linux.alibaba.com
2024-04-22bridge/br_netlink.c: no need to return void functionHangbin Liu
br_info_notify is a void function. There is no need to return. Fixes: b6d0425b816e ("bridge: cfm: Netlink Notifications.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22docs: Update s390 vfio-ap doc for ap_config sysfs attributeJason J. Herne
A new sysfs attribute, ap_config, for the vfio_ap driver is documented. Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Link: https://lore.kernel.org/r/20240415152555.13152-6-jjherne@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-23 11:20:25 +0000