| Age | Commit message (Collapse) | Author |
|---|
|
Smatch complains that "reg" can be uninitialized if the
abx500_get_register_interruptible() call fails. It's an interruptable
function, so we should check if the user presses CTRL-C.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The generic power-domain framework has been updated to allow devices
that require more than one power-domain to create a new device for
each power-domain required and then link these new power-domain
devices to the consumer device.
Update the Tegra xHCI driver to use the new APIs provided by the
generic power-domain framework so we can use the generic power-domain
framework for managing the xHCI controllers power-domains. Please
note that to maintain backward compatibility with older device-tree
blobs these new generic power-domain APIs are only used if the
'power-domains' property is present and otherwise we fall back to
using the legacy Tegra APIs for managing the power-domains.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the XUSB power domains used by the Tegra xHCI controller are
never powered off on the removal of the driver, however, they will be
powered off on probe failure. Update the removal code to be consistent
with the probe failure path to power off the XUSB power domains.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In rmmod path, usbip_vudc does platform_device_put() twice once from
platform_device_unregister() and then from put_vudc_device().
The second put results in:
BUG kmalloc-2048 (Not tainted): Poison overwritten error or
BUG: KASAN: use-after-free in kobject_put+0x1e/0x230 if KASAN is
enabled.
[ 169.042156] calling init+0x0/0x1000 [usbip_vudc] @ 1697
[ 169.042396] =============================================================================
[ 169.043678] probe of usbip-vudc.0 returned 1 after 350 usecs
[ 169.044508] BUG kmalloc-2048 (Not tainted): Poison overwritten
[ 169.044509] -----------------------------------------------------------------------------
...
[ 169.057849] INFO: Freed in device_release+0x2b/0x80 age=4223 cpu=3 pid=1693
[ 169.057852] kobject_put+0x86/0x1b0
[ 169.057853] 0xffffffffc0c30a96
[ 169.057855] __x64_sys_delete_module+0x157/0x240
Fix it to call platform_device_del() instead and let put_vudc_device() do
the platform_device_put().
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the call to atoi is being passed a single char string
that is not null terminated, so there is a potential read overrun
along the stack when parsing for an integer value. Fix this by
instead using a 2 char string that is initialized to all zeros
to ensure that a 1 char read into the string is always terminated
with a \0.
Detected by cppcheck:
"Invalid atoi() argument nr 1. A nul-terminated string is required."
Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with vudc backend")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Upon success the update_status handler returns a positive number
corresponding to the number of bytes transferred by usb_control_msg.
However the return code of the update_status handler should indicate if
an error occurred(negative) or how many bytes of the user's input to sysfs
that was consumed. Return code zero indicates all bytes were consumed.
The bug can for example result in the update_status handler being called
twice, the second time with only the "unconsumed" part of the user's input
to sysfs. Effectively setting an incorrect brightness.
Change the update_status handler to return zero for all successful
transactions and forward usb_control_msg's error code upon failure.
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Turned from arch/arm/mach-mmp/devices.c into a proper PHY driver, so
that in can be instantiated from a DT.
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2018-10-17
This series adds support for the new igc driver.
The igc driver is the new client driver supporting the Intel I225
Ethernet Controller, which supports 2.5GbE speeds. The reason for
creating a new client driver, instead of adding support for the new
device in e1000e, is that the silicon behaves more like devices
supported in igb driver. It also did not make sense to add a client
part, to the igb driver which supports only 1GbE server parts.
This initial set of patches is designed for basic support (i.e. link and
pass traffic). Follow-on patch series will add more advanced support
like VLAN, Wake-on-LAN, etc..
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2018-10-17
========================================================================
From Or Gerlitz <ogerlitz@mellanox.com>:
This series from Paul adds support to mlx5 e-switch tc offloading of multiple priorities and chains.
This is made of four building blocks (along with few minor driver refactors):
[1] Split FDB fast path prio to multiple namespaces
Currently the FDB name-space contains two priorities, fast path (p0) and slow path (p1).
The slow path contains the per representor SQ send-to-vport TX rule and the match-all
RX miss rule. As a pre-step to support multi-chains and priorities, we split the FDB fast path
to multiple namespaces (sub namespaces), each with multiple priorities.
[2] E-Switch chains and priorities
A chain is a group of priorities. We use the fdb parallel sub-namespaces to implement chains,
and a flow table for each priority in them.
Because these namespaces are parallel and in series to the slow path
fdb, the chains aren't connected to each other (but to the slow path),
and one must use a explicit goto action to reach a different chain.
Flow tables for the priorities are created on demand and destroyed
once not used.
[3] Add a no-append flow insertion mode, use it for TC offloads
Enhance the driver fs core, such that if a no-append flag is set by the caller,
we add a new FTE, instead of appending the actions of the inserted rule when
the same match already exists.
For encap rules, we defer the HW offloading till we have a valid neighbor. This can
result in the packet hitting a lower priority rule in the HW DP. Use the no-append API
to push these packets to the slow path FDB table, so they go to the TC kernel DP as done
before priorities where supported.
[4] Offloading tc priorities and chains for eswitch flows
Using [1], [2] and [3] above we add the support for offloading both chains
and priorities. To get to a new chain, use the tc goto action. We support
a fixed prio range 1-16, and chains 0-3.
=============================================================================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-10-18
1) Remove an unnecessary dev->tstats check in xfrmi_get_stats64.
From Li RongQing.
2) We currently do a sizeof(element) instead of a sizeof(array)
check when initializing the ovec array of the secpath.
Currently this array can have only one element, so code is
OK but error-prone. Change this to do a sizeof(array)
check so that we can add more elements in future.
From Li RongQing.
3) Improve xfrm IPv6 address hashing by using the complete IPv6
addresses for a hash. From Michal Kubecek.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2018-10-18
1) Free the xfrm interface gro_cells when deleting the
interface, otherwise we leak it. From Li RongQing.
2) net/core/flow.c does not exist anymore, so remove it
from the MAINTAINERS file.
3) Fix a slab-out-of-bounds in _decode_session6.
From Alexei Starovoitov.
4) Fix RCU protection when policies inserted into
thei bydst lists. From Florian Westphal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PCI controller in the Marvell Armada 3720 does not implement a
software-accessible root port PCI bridge configuration space. This
causes a number of problems when using PCIe switches or when the Max
Payload size needs to be aligned between the root complex and the
endpoint.
Implementing an emulated root PCI bridge, like is already done in the
pci-mvebu driver for older Marvell platforms allows to solve those
issues, and also to support features such as ASR, PME, VC, HP.
Signed-off-by: Zachary Zhang <zhangzg@marvell.com>
[Thomas: convert to the common emulated PCI bridge logic.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Convert the pci-mvebu driver to use the pci-bridge-emul logic, that
helps emulating a root port PCI bridge configuration space.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Commit dc0352ab0b2a0 ("PCI: mvebu: Add PCI Express root complex
capability block") added support for emulating the PCI Express
capability block. As part of this, the pcie_sltcap, pcie_devctl and
pcie_rtctl fields were added to the mvebu_sw_pci_bridge structure, and
used when reading the corresponding PCI Express capability block
registers.
However, those structure members are never set to any value other than
zero. This makes them unneeded because:
- pcie_devctl is used to OR *value, so with pcie_devctl always zero,
it has no effect.
- for pcie_sltcap and pcie_rtstl, the mvebu_sw_pci_bridge_read()
function always returns 0 for registers that are not explicitly
handled.
In preparation for reworking the PCI bridge emulation logic in
pci-mvebu, let's simplify the code by dropping those structure
members.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Some PCI host controllers do not expose a configuration space for the
root port PCI bridge. Due to this, the Marvell Armada 370/38x/XP PCI
controller driver (pci-mvebu) emulates a root port PCI bridge
configuration space, and uses that to (among other things) dynamically
create the memory windows that correspond to the PCI MEM and I/O
regions.
Since we now need to add a very similar logic for the Marvell Armada
37xx PCI controller driver (pci-aardvark), instead of duplicating the
code, we create in this commit a common logic called pci-bridge-emul.
The idea of this logic is to emulate a root port PCI bridge
configuration space by providing configuration space read/write
operations, and faking behind the scenes the configuration space of a
PCI bridge. A PCI host controller driver simply has to call
pci_bridge_emul_conf_read() and pci_bridge_emul_conf_write() to
read/write the configuration space of the bridge.
By default, the PCI bridge configuration space is simply emulated by a
chunk of memory, but the PCI host controller can override the behavior
of the read and write operations on a per-register basis to do
additional actions if needed. We take care of complying with the
behavior of the PCI configuration space registers in terms of bits
that are read-write, read-only, reserved and write-1-to-clear.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Previously, we allow multiple nodes can resync device, but we
had changed it to only support one node can do resync at one
time, but suspend_info is still used.
Now, let's remove the structure and use suspend_lo/hi to record
the range.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
We need to continue the reshaping if it was interrupted in
original node. So original node should call resync_bitmap
in case reshaping is aborted.
Then BITMAP_NEEDS_SYNC message is broadcasted to other nodes,
node which continues the reshaping should restart reshape from
mddev->reshape_position instead of from the first beginning.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
When reshape is happening in one node, other nodes could receive
lots of RESYNCING messages, so md_bitmap_sync_with_cluster is called.
Since the resyncing window is typically small in these RESYNCING
messages, so WARN is always triggered, so we should not call the
func when reshape is happening.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
remove_and_add_spares is not needed if reshape is
happening in another node, because raid10_add_disk
called inside raid10_start_reshape would handle the
role changes of disk. Plus, remove_and_add_spares
can't deal with the role change due to reshape.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
We need to change the capacity in all nodes after one node
finishs reshape. And as we did before, we can't change the
capacity directly in md_do_sync, instead, the capacity should
be only changed in update_size or received CHANGE_CAPACITY
msg.
So master node calls update_size after completes reshape in
md_reap_sync_thread, but we need to skip ops->update_size if
MD_CLOSING is set since reshaping could not be finish.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
Since the resync region from suspend_info means one node
is reshaping this area, so the position of reshape_progress
should be included in the area.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
For clustered raid10 scenario, we need to let all the nodes
know about that a new disk is added to the array, and the
reshape caused by add new member just need to be happened in
one node, but other nodes should know about the change.
Since reshape means read data from somewhere (which is already
used by array) and write data to unused region. Obviously, it
is awful if one node is reading data from address while another
node is writing to the same address. Considering we have
implemented suspend writes in the resyncing area, so we can
just broadcast the reading address to other nodes to avoid the
trouble.
For master node, it would call reshape_request then update sb
during the reshape period. To avoid above trouble, we call
resync_info_update to send RESYNC message in reshape_request.
Then from slave node's view, it receives two type messages:
1. RESYNCING message
Slave node add the address (where master node reading data from)
to suspend list.
2. METADATA_UPDATED message
Once slave nodes know the reshaping is started in master node,
it is time to update reshape position and call start_reshape to
follow master node's step. After reshape is done, only reshape
position is need to be updated, so the majority task of reshaping
is happened on the master node.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
To support add disk under grow mode, we need to resize
all the bitmaps of each node before reshape, so that we
can ensure all nodes have the same view of the bitmap of
the clustered raid.
So after the master node resized the bitmap, it broadcast
a message to other slave nodes, and it checks the size of
each bitmap are same or not by compare pages. We can only
continue the reshaping after all nodes update the bitmap
to the same size (by checking the pages), otherwise revert
bitmap size to previous value.
The resize_bitmaps interface and BITMAP_RESIZE message are
introduced in md-cluster.c for the purpose.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
The VMD removal path calls pci_stop_root_busi(), which tears down the pcie
tree, including detaching all of the attached drivers. During driver
detachment, devices may use pci_release_region() to release resources.
This path relies on the resource being accessible in resource tree.
By detaching the child domain from the parent resource domain prior to
stopping the bus, we are preventing the list traversal from finding the
resource to be freed. If we instead detach the resource after stopping
the bus, we will have properly freed the resource and detaching is
simply accounting at that point.
Without this order, the resource is never freed and is orphaned on VMD
removal, leading to a warning:
[ 181.940162] Trying to free nonexistent resource <e5a10000-e5a13fff>
Fixes: 2c2c5c5cd213 ("x86/PCI: VMD: Attach VMD resources to parent domain's resource tree")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Make cpu-usage debugging easier by naming workqueues per device.
Example ps output:
root 413 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd_io/253:0]
root 414 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd/253:0]
root 415 0.0 0.0 0 0 ? S paź02 1:10 [dmcrypt_write/253:0]
root 465 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd_io/253:2]
root 466 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd/253:2]
root 467 0.0 0.0 0 0 ? S paź02 2:06 [dmcrypt_write/253:2]
root 15359 0.2 0.0 0 0 ? I< 19:43 0:25 [kworker/u17:8-kcryptd/253:0]
root 16563 0.2 0.0 0 0 ? I< 20:10 0:18 [kworker/u17:0-kcryptd/253:2]
root 23205 0.1 0.0 0 0 ? I< 21:21 0:04 [kworker/u17:4-kcryptd/253:0]
root 13383 0.1 0.0 0 0 ? I< 21:32 0:02 [kworker/u17:2-kcryptd/253:2]
root 2610 0.1 0.0 0 0 ? I< 21:42 0:01 [kworker/u17:12-kcryptd/253:2]
root 20124 0.1 0.0 0 0 ? I< 21:56 0:01 [kworker/u17:1-kcryptd/253:2]
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
s/s/as
[ mingo: Also add a missing 'the', add proper punctuation and clarify what 'swap' means here. ]
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: alexander.levin@verizon.com
Cc: frederic@kernel.org
Cc: joel@joelfernandes.org
Cc: paulmck@linux.vnet.ibm.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20181018142133.12341-1-tiny.windzz@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add a shortcut for dm_device_name(dm_table_get_md(t)).
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
In copy_params(), the struct 'dm_ioctl' is first copied from the user
space buffer 'user' to 'param_kernel' and the field 'data_size' is
checked against 'minimum_data_size' (size of 'struct dm_ioctl' payload
up to its 'data' member). If the check fails, an error code EINVAL will be
returned. Otherwise, param_kernel->data_size is used to do a second copy,
which copies from the same user-space buffer to 'dmi'. After the second
copy, only 'dmi->data_size' is checked against 'param_kernel->data_size'.
Given that the buffer 'user' resides in the user space, a malicious
user-space process can race to change the content in the buffer between
the two copies. This way, the attacker can inject inconsistent data
into 'dmi' (versus previously validated 'param_kernel').
Fix redundant copying of 'minimum_data_size' from user-space buffer by
using the first copy stored in 'param_kernel'. Also remove the
'data_size' check after the second copy because it is now unnecessary.
Cc: stable@vger.kernel.org
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Using the sh_entsize for both values isn't correct. It happens to be
correct on x86...
For both 32-bit and 64-bit sparc, there are four PLT entries in the PLT
section.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: David Tolnay <dtolnay@gmail.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Fixes: b2f7605076d6 ("perf symbols: Fix plt entry calculation for ARM and AARCH64")
Link: http://lkml.kernel.org/r/20181017.120859.2268840244308635255.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20181016.211545.1487970139012324624.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
E.g.:
$ perf annotate --stdio2
Samples: 7K of event 'cycles:ppp', 4000 Hz, Event count (approx.): 3086733887
__gettimeofday /lib32/libc-2.27.so [Percent: local period]
Percent│
│
│
│ Disassembly of section .text:
│
│ 000a6fa0 <__gettimeofday@@GLIBC_2.0>:
0.47 │ save %sp, -96, %sp
0.73 │ sethi %hi(0xe9000), %l7
│ → call __frame_state_for@@GLIBC_2.0+0x480
0.30 │ add %l7, 0x58, %l7 ! e9058 <nftw64@@GLIBC_2.3.3+0x818>
1.33 │ mov %i0, %o0
│ mov %i1, %o1
0.43 │ mov 0x74, %g1
│ ta 0x10
88.92 │ ↓ bcc 30
2.95 │ clr %g1
│ neg %o0
│ mov 1, %g1
0.31 │30: cmp %g1, 0
│ bne,pn %icc, a6fe4 <__gettimeofday@@GLIBC_2.0+0x44>
│ mov %o0, %i0
1.96 │ ← return %i7 + 8
2.62 │ nop
│ sethi %hi(0), %g1
│ neg %o0, %g2
│ add %g1, 0x160, %g1
│ ld [ %l7 + %g1 ], %g1
│ st %g2, [ %g7 + %g1 ]
│ ← return %i7 + 8
│ mov -1, %o0
Signed-off-by: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20181016.205555.1070918198627611771.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Store -k clockid frequency into Perf trace to enable timestamps
derived metrics conversion into wall clock time on reporting stage.
Below is the example of perf report output:
tools/perf/perf record -k raw -- ../../matrix/linux/matrix.gcc
...
[ perf record: Captured and wrote 31.222 MB perf.data (818054 samples) ]
tools/perf/perf report --header
# ========
...
# event : name = cycles:ppp, , size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, use_clockid = 1, clockid = 4
...
# clockid frequency: 1000 MHz
...
# ========
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/23a4a1dc-b160-85a0-347d-40a2ed6d007b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
GCC 4.6 is the minimum supported now.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Back when I added -Werror in commit ba55bd74360e ("powerpc: Add
configurable -Werror for arch/powerpc") I did it by adding it to most
of the arch Makefiles.
At the time we excluded math-emu, because apparently it didn't build
cleanly. But that seems to have been fixed somewhere in the interim.
So move the -Werror addition to the top-level of the arch, this saves
us from repeating it in every Makefile and means we won't forget to
add it to any new sub-dirs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This is a nice cleanup, arch/powerpc/Makefile is long and messy so
moving this out helps a little.
It also allows us to do:
$ make arch/powerpc
Which can be helpful if you just want to compile test some changes to
arch code and not link everything.
Finally it also gives us a single place to do subdir-cc-flags
assignments which affect the whole of arch/powerpc, which we will do
in a future patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
There's some antiquated debug output that's trying
to do a hand-made hexdump and turning into horrible
1-byte-per-line output these days.
Use print_hex_dump() instead
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
do_exit() already includes a test to panic() is in_interrupt()
This patch removes powerpc one which is redundant.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When creating the boot-time FDT from an actual Open Firmware live
tree, let's generate "phandle" properties for the phandles instead
of the old deprecated "linux,phandle".
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Unsplit warning printf()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
prom_init.c must not modify the kernel image outside
of the .bss.prominit section. Thus make sure that
prom_init.o doesn't have anything in any of these:
.data
.bss
.init.data
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This makes __prombss its own section, and for now store
it in .bss.
This will give us the ability later to store it elsewhere
and/or free it after boot (it's about 8KB).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
As they are no longer used past the end of prom_init
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Make the existing initialized definition constant and copy
it to a __prombss copy
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Initialize it dynamically instead of statically
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We removed support for running under any OPAL version
earlier than v3 in 2015 (they never saw the light of day
anyway), but we kept some leftovers of this support in
prom_init.c, so let's take it out.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This replaces all occurrences of __initdata for uninitialized
data with a new __prombss
Currently __promdata is defined to be __initdata but we'll
eventually change that.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Adds a driver that implements support for enabling and accessing PAPR
SCM regions. Unfortunately due to how the PAPR interface works we can't
use the existing of_pmem driver (yet) because:
a) The guest is required to use the H_SCM_BIND_MEM h-call to add
add the SCM region to it's physical address space, and
b) There is currently no mechanism for relating a bare of_pmem region
to the backing DIMM (or not-a-DIMM for our case).
Both of these are easily handled by rolling the functionality into a
seperate driver so here we are...
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch implements support for discovering storage class memory
devices at boot and for handling hotplug of new regions via RTAS
hotplug events.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Fix CONFIG_MEMORY_HOTPLUG=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When printing the machine check cause, the cause appears on the
following line due to bad use of printk without \n:
[ 33.663993] Machine check in kernel mode.
[ 33.664011] Caused by (from SRR1=9032):
[ 33.664036] Data access error at address c90c8000
This patch fixes it by using pr_cont() for the second part:
[ 133.258131] Machine check in kernel mode.
[ 133.258146] Caused by (from SRR1=9032): Data access error at address c90c8000
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
