summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-05rtase: Add support for a pci table in this moduleJustin Lai
Add support for a pci table in this module, and implement pci_driver function to initialize this driver, remove this driver, or shutdown this driver. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20240904032114.247117-2-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c 2560db6ede1a ("net: phy: Fix missing of_node_put() for leds") 1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()") https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au Adjacent changes: drivers/net/ethernet/xilinx/xilinx_axienet.h drivers/net/ethernet/xilinx/xilinx_axienet_main.c 858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop") 76abb5d675c4 ("net: xilinx: axienet: Add statistics support") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05Merge tag 'bpf-6.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull bpf fixes from Alexei Starovoitov: - Fix crash when btf_parse_base() returns an error (Martin Lau) - Fix out of bounds access in btf_name_valid_section() (Jeongjun Park) * tag 'bpf-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Add a selftest to check for incorrect names bpf: add check for invalid name in btf_name_valid_section() bpf: Fix a crash when btf_parse_base() returns an error pointer
2024-09-05netlink: specs: nftables: allow decode of tailscale rulesetDonald Hunter
Fill another small gap in the nftables spec so that it is possible to dump a tailscale ruleset with: tools/net/ynl/cli.py --spec \ Documentation/netlink/specs/nftables.yaml --dump getrule This adds support for the 'target' expression. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20240904091024.3138-1-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05net: napi: Prevent overflow of napi_defer_hard_irqsJoe Damato
In commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature") napi_defer_irqs was added to net_device and napi_defer_irqs_count was added to napi_struct, both as type int. This value never goes below zero, so there is not reason for it to be a signed int. Change the type for both from int to u32, and add an overflow check to sysfs to limit the value to S32_MAX. The limit of S32_MAX was chosen because the practical limit before this patch was S32_MAX (anything larger was an overflow) and thus there are no behavioral changes introduced. If the extra bit is needed in the future, the limit can be raised. Before this patch: $ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs' $ cat /sys/class/net/eth4/napi_defer_hard_irqs -2147483647 After this patch: $ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs' bash: line 0: echo: write error: Numerical result out of range Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned: include/linux/netdevice.h: unsigned int tx_queue_len; And has an overflow check: dev_change_tx_queue_len(..., unsigned long new_len): if (new_len != (unsigned int)new_len) return -ERANGE; Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240904153431.307932-1-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06Merge tag 'amd-drm-fixes-6.11-2024-09-05' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.11-2024-09-05: amdgpu: - IPS workaround - Fix compatibility with older MES firmware - Fix CPU spikes when clearing VRAM - Backlight fix - PMO fix - Revert SWSMU change to fix regression Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240905190533.854116-1-alexander.deucher@amd.com
2024-09-06Merge tag 'drm-misc-fixes-2024-09-05' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes A zpos normalization fix for komeda, a register bitmask fix for nouveau, a memory leak fix for imagination, three fixes for the recent bridge HDMI work, a potential DoS fix and a cache coherency for panthor, a change of panel compatible and a deferred-io fix when used with non-highmem memory. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat
2024-09-06Merge tag 'drm-xe-fixes-2024-09-05' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - GSC loading fix (Daniele) - PCODE mutex fix (Matt) - Suspend/Resume fixes (Maarten, Imre) - RPM fixes (Rodrigo) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZtmyFvDfFLPbuf6A@intel.com
2024-09-05Merge tag 'net-6.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from can, bluetooth and wireless. No known regressions at this point. Another calm week, but chances are that has more to do with vacation season than the quality of our work. Current release - new code bugs: - smc: prevent NULL pointer dereference in txopt_get - eth: ti: am65-cpsw: number of XDP-related fixes Previous releases - regressions: - Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE", it breaks existing user space - Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid later problems with suspend - can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open - eth: r8152: fix the firmware communication error due to use of bulk write - ptp: ocp: fix serial port information export - eth: igb: fix not clearing TimeSync interrupts for 82580 - Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo Previous releases - always broken: - eth: intel: fix crashes and bugs when reconfiguration and resets happening in parallel - wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power() Misc: - docs: netdev: document guidance on cleanup.h" * tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) ila: call nf_unregister_net_hooks() sooner tools/net/ynl: fix cli.py --subscribe feature MAINTAINERS: fix ptp ocp driver maintainers address selftests: net: enable bind tests net: dsa: vsc73xx: fix possible subblocks range of CAPT block sched: sch_cake: fix bulk flow accounting logic for host fairness docs: netdev: document guidance on cleanup.h net: xilinx: axienet: Fix race in axienet_stop net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN r8152: fix the firmware doesn't work fou: Fix null-ptr-deref in GRO. bareudp: Fix device stats updates. net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup bpf, net: Fix a potential race in do_sock_getsockopt() net: dqs: Do not use extern for unused dql_group sch/netem: fix use after free in netem_dequeue usbnet: modern method to get random MAC MAINTAINERS: wifi: cw1200: add net-cw1200.h ice: do not bring the VSI up, if it was down before the XDP setup ice: remove ICE_CFG_BUSY locking from AF_XDP code ...
2024-09-05Merge tag 'spi-fix-v6.11-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small driver specific fixes (including some of the widespread work on fixing missing ID tables for module autoloading and the revert of some problematic PM work in spi-rockchip), some improvements to the MAINTAINERS information for the NXP drivers and the addition of a new device ID to spidev" * tag 'spi-fix-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: MAINTAINERS: SPI: Add mailing list imx@lists.linux.dev for nxp spi drivers MAINTAINERS: SPI: Add freescale lpspi maintainer information spi: spi-fsl-lpspi: Fix off-by-one in prescale max spi: spidev: Add missing spi_device_id for jg10309-01 spi: bcm63xx: Enable module autoloading spi: intel: Add check devm_kasprintf() returned value spi: spidev: Add an entry for elgin,jg10309-01 spi: rockchip: Resolve unbalanced runtime PM / system PM handling
2024-09-06Merge tag 'drm-intel-fixes-2024-09-05' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - drm/i915: Do not attempt to load the GSC multiple times (Daniele Ceraolo Spurio) - drm/i915: Fix readout degamma_lut mismatch on ilk/snb (Ville Syrjälä) - drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unused (Andy Shevchenko) - drm/i915/fence: Mark debug_fence_free() with __maybe_unused (Andy Shevchenko) - drm/i915/display: Add mechanism to use sink model when applying quirk [display] (Jouni Högander) - drm/i915/display: Increase Fast Wake Sync length as a quirk [display] (Jouni Högander) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/Ztlo2hVO4SBvfAnq@linux
2024-09-05Merge tag 'regulator-fix-v6.11-stub' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "A fix from Doug Anderson for a missing stub, required to fix the build for some newly added users of devm_regulator_bulk_get_const() in !REGULATOR configurations" * tag 'regulator-fix-v6.11-stub' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Stub devm_regulator_bulk_get_const() if !CONFIG_REGULATOR
2024-09-05Merge tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linuxLinus Torvalds
Pull Rust fixes from Miguel Ojeda: "Toolchain and infrastructure: - Fix builds for nightly compiler users now that 'new_uninit' was split into new features by using an alternative approach for the code that used what is now called the 'box_uninit_write' feature - Allow the 'stable_features' lint to preempt upcoming warnings about them, since soon there will be unstable features that will become stable in nightly compilers - Export bss symbols too 'kernel' crate: - 'block' module: fix wrong usage of lockdep API 'macros' crate: - Provide correct provenance when constructing 'THIS_MODULE' Documentation: - Remove unintended indentation (blockquotes) in generated output - Fix a couple typos MAINTAINERS: - Remove Wedson as Rust maintainer - Update Andreas' email" * tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux: MAINTAINERS: update Andreas Hindborg's email address MAINTAINERS: Remove Wedson as Rust maintainer rust: macros: provide correct provenance when constructing THIS_MODULE rust: allow `stable_features` lint docs: rust: remove unintended blockquote in Quick Start rust: alloc: eschew `Box<MaybeUninit<T>>::write` rust: kernel: fix typos in code comments docs: rust: remove unintended blockquote in Coding Guidelines rust: block: fix wrong usage of lockdep API rust: kbuild: fix export of bss symbols
2024-09-05Merge tag 'trace-v6.11-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix adding a new fgraph callback after function graph tracing has already started. If the new caller does not initialize its hash before registering the fgraph_ops, it can cause a NULL pointer dereference. Fix this by adding a new parameter to ftrace_graph_enable_direct() passing in the newly added gops directly and not rely on using the fgraph_array[], as entries in the fgraph_array[] must be initialized. Assign the new gops to the fgraph_array[] after it goes through ftrace_startup_subops() as that will properly initialize the gops->ops and initialize its hashes. - Fix a memory leak in fgraph storage memory test. If the "multiple fgraph storage on a function" boot up selftest fails in the registering of the function graph tracer, it will not free the memory it allocated for the filter. Break the loop up into two where it allocates the filters first and then registers the functions where any errors will do the appropriate clean ups. - Only clear the timerlat timers if it has an associated kthread. In the rtla tool that uses timerlat, if it was killed just as it was shutting down, the signals can free the kthread and the timer. But the closing of the timerlat files could cause the hrtimer_cancel() to be called on the already freed timer. As the kthread variable is is set to NULL when the kthreads are stopped and the timers are freed it can be used to know not to call hrtimer_cancel() on the timer if the kthread variable is NULL. - Use a cpumask to keep track of osnoise/timerlat kthreads The timerlat tracer can use user space threads for its analysis. With the killing of the rtla tool, the kernel can get confused between if it is using a user space thread to analyze or one of its own kernel threads. When this confusion happens, kthread_stop() can be called on a user space thread and bad things happen. As the kernel threads are per-cpu, a bitmask can be used to know when a kernel thread is used or when a user space thread is used. - Add missing interface_lock to osnoise/timerlat stop_kthread() The stop_kthread() function in osnoise/timerlat clears the osnoise kthread variable, and if it was a user space thread does a put_task on it. But this can race with the closing of the timerlat files that also does a put_task on the kthread, and if the race happens the task will have put_task called on it twice and oops. - Add cond_resched() to the tracing_iter_reset() loop. The latency tracers keep writing to the ring buffer without resetting when it issues a new "start" event (like interrupts being disabled). When reading the buffer with an iterator, the tracing_iter_reset() sets its pointer to that start event by walking through all the events in the buffer until it gets to the time stamp of the start event. In the case of a very large buffer, the loop that looks for the start event has been reported taking a very long time with a non preempt kernel that it can trigger a soft lock up warning. Add a cond_resched() into that loop to make sure that doesn't happen. - Use list_del_rcu() for eventfs ei->list variable It was reported that running loops of creating and deleting kprobe events could cause a crash due to the eventfs list iteration hitting a LIST_POISON variable. This is because the list is protected by SRCU but when an item is deleted from the list, it was using list_del() which poisons the "next" pointer. This is what list_del_rcu() was to prevent. * tag 'trace-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread() tracing/timerlat: Only clear timer if a kthread exists tracing/osnoise: Use a cpumask to know what threads are kthreads eventfs: Use list_del_rcu() for SRCU protected list variable tracing: Avoid possible softlockup in tracing_iter_reset() tracing: Fix memory leak in fgraph storage selftest tracing: fgraph: Fix to add new fgraph_ops to array after ftrace_startup_subops()
2024-09-05ila: call nf_unregister_net_hooks() soonerEric Dumazet
syzbot found an use-after-free Read in ila_nf_input [1] Issue here is that ila_xlat_exit_net() frees the rhashtable, then call nf_unregister_net_hooks(). It should be done in the reverse way, with a synchronize_rcu(). This is a good match for a pre_exit() method. [1] BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline] BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline] BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16 CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline] ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline] ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 run_ksoftirqd+0xca/0x130 kernel/softirq.c:928 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) page_type: 0xbfffffff(buddy) raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000 raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493 prep_new_page mm/page_alloc.c:1501 [inline] get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695 __alloc_pages_node_noprof include/linux/gfp.h:269 [inline] alloc_pages_node_noprof include/linux/gfp.h:296 [inline] ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103 __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130 __do_kmalloc_node mm/slub.c:4146 [inline] __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164 __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071 ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613 ops_init+0x359/0x610 net/core/net_namespace.c:139 setup_net+0x515/0xca0 net/core/net_namespace.c:343 copy_net_ns+0x4e2/0x7b0 net/core/net_namespace.c:508 create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228 ksys_unshare+0x619/0xc10 kernel/fork.c:3328 __do_sys_unshare kernel/fork.c:3399 [inline] __se_sys_unshare kernel/fork.c:3397 [inline] __x64_sys_unshare+0x38/0x40 kernel/fork.c:3397 page last free pid 11846 tgid 11846 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1094 [inline] free_unref_page+0xd22/0xea0 mm/page_alloc.c:2612 __folio_put+0x2c8/0x440 mm/swap.c:128 folio_put include/linux/mm.h:1486 [inline] free_large_kmalloc+0x105/0x1c0 mm/slub.c:4565 kfree+0x1c4/0x360 mm/slub.c:4588 rhashtable_free_and_destroy+0x7c6/0x920 lib/rhashtable.c:1169 ila_xlat_exit_net+0x55/0x110 net/ipv6/ila/ila_xlat.c:626 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x802/0xcc0 net/core/net_namespace.c:640 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Memory state around the buggy address: ffff88806461ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88806461ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888064620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888064620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888064620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <tom@herbertland.com> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20240904144418.1162839-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05tools/net/ynl: fix cli.py --subscribe featureArkadiusz Kubalewski
Execution of command: ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml / --subscribe "monitor" --sleep 10 fails with: File "/repo/./tools/net/ynl/cli.py", line 109, in main ynl.check_ntf() File "/repo/tools/net/ynl/lib/ynl.py", line 924, in check_ntf op = self.rsp_by_value[nl_msg.cmd()] KeyError: 19 Parsing Generic Netlink notification messages performs lookup for op in the message. The message was not yet decoded, and is not yet considered GenlMsg, thus msg.cmd() returns Generic Netlink family id (19) instead of proper notification command id (i.e.: DPLL_CMD_PIN_CHANGE_NTF=13). Allow the op to be obtained within NetlinkProtocol.decode(..) itself if the op was not passed to the decode function, thus allow parsing of Generic Netlink notifications without causing the failure. Suggested-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/netdev/m2le0n5xpn.fsf@gmail.com/ Fixes: 0a966d606c68 ("tools/net/ynl: Fix extack decoding for directional ops") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20240904135034.316033-1-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05MAINTAINERS: fix ptp ocp driver maintainers addressVadim Fedorenko
While checking the latest series for ptp_ocp driver I realised that MAINTAINERS file has wrong item about email on linux.dev domain. Fixes: 795fd9342c62 ("ptp_ocp: adjust MAINTAINERS and mailmap") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240904131855.559078-1-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05selftests: net: enable bind testsJamie Bainbridge
bind_wildcard is compiled but not run, bind_timewait is not compiled. These two tests complete in a very short time, use the test harness properly, and seem reasonable to enable. The author of the tests confirmed via email that these were intended to be run. Enable these two tests. Fixes: 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Fixes: 2c042e8e54ef ("tcp: Add selftest for bind() and TIME_WAIT.") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/5a009b26cf5fb1ad1512d89c61b37e2fac702323.1725430322.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05kunit: Fix missing kerneldoc commentDavid Gow
Add a missing kerneldoc comment for the 'test' test context parameter, fixing the following warning: include/kunit/test.h:492: warning: Function parameter or struct member 'test' not described in 'kunit_kfree_const' Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/lkml/20240827160631.67e121ed@canb.auug.org.au/ Fixes: f2c6dbd22017 ("kunit: Device wrappers should also manage driver name") Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-05Revert "drm/amdgpu: align pp_power_profile_mode with kernel docs"Alex Deucher
This reverts commit 8f614469de248a4bc55fb07e55d5f4c340c75b11. This breaks some manual setting of the profile mode in certain cases. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3600 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7a199557643e993d4e7357860624b8aa5d8f4340) Cc: stable@vger.kernel.org
2024-09-05MAINTAINERS: SPI: Add mailing list imx@lists.linux.dev for nxp spi driversFrank Li
Add mailing list imx@lists.linux.dev for nxp spi drivers(qspi, fspi and dspi). Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240905155230.1901787-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-05MAINTAINERS: SPI: Add freescale lpspi maintainer informationFrank Li
Add imx@lists.linux.dev and NXP maintainer information for lpspi driver (drivers/spi/spi-fsl-lpspi.c). Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240905154124.1901311-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-05Merge tag 'platform-drivers-x86-v6.11-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - amd/pmf: ASUS GA403 quirk matching tweak - dell-smbios: Fix to the init function rollback path * tag 'platform-drivers-x86-v6.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/amd: pmf: Make ASUS GA403 quirk generic platform/x86: dell-smbios: Fix error path in dell_smbios_init()
2024-09-05Merge tag 'linux_kselftest-kunit-fixes-6.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fix fromShuah Khan: "One single fix to a use-after-free bug resulting from kunit_driver_create() failing to copy the driver name leaving it on the stack or freeing it" * tag 'linux_kselftest-kunit-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Device wrappers should also manage driver name
2024-09-05wifi: ath12k: Avoid -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Move the conflicting declaration to the end of the structure. Notice that `struct ieee80211_chanctx_conf` is a flexible structure --a structure that contains a flexible-array member. Also, remove an unused structure. Fix the following warnings: drivers/net/wireless/ath/ath12k/core.h:290:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/ath/ath12k/dp.h:1499:24: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/ZrZEuxJihMzAaTVh@cute
2024-09-05wifi: ath11k: Avoid -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Move the conflicting declaration to the end of the structure. Notice that `struct ieee80211_chanctx_conf` is a flexible structure --a structure that contains a flexible-array member. Also, remove a couple of unused structures. Fix the following warnings: drivers/net/wireless/ath/ath11k/core.h:409:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/ath/ath11k/dp.h:1309:24: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/ath/ath11k/dp.h:1368:24: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/ZrZB3Rjswe0ZXtug@cute
2024-09-05KVM: Remove HIGH_RES_TIMERS dependencySteven Rostedt
Commit 92b5265d38f6a ("KVM: Depend on HIGH_RES_TIMERS") added a dependency to high resolution timers with the comment: KVM lapic timer and tsc deadline timer based on hrtimer, setting a leftmost node to rb tree and then do hrtimer reprogram. If hrtimer not configured as high resolution, hrtimer_enqueue_reprogram do nothing and then make kvm lapic timer and tsc deadline timer fail. That was back in 2012, where hrtimer_start_range_ns() would do the reprogramming with hrtimer_enqueue_reprogram(). But as that was a nop with high resolution timers disabled, this did not work. But a lot has changed in the last 12 years. For example, commit 49a2a07514a3a ("hrtimer: Kick lowres dynticks targets on timer enqueue") modifies __hrtimer_start_range_ns() to work with low res timers. There's been lots of other changes that make low res work. ChromeOS has tested this before as well, and it hasn't seen any issues with running KVM with high res timers disabled. There could be problems, especially at low HZ, for guests that do not support kvmclock and rely on precise delivery of periodic timers to keep their clock running. This can be the APIC timer (provided by the kernel), the RTC (provided by userspace), or the i8254 (choice of kernel/userspace). These guests are few and far between these days, and in the case of the APIC timer + Intel hosts we can use the preemption timer (which is TSC-based and has better latency _and_ accuracy). In KVM, only x86 is requiring CONFIG_HIGH_RES_TIMERS; perhaps a "depends on HIGH_RES_TIMERS || EXPERT" could be added to virt/kvm, or a pr_warn could be added to kvm_init if HIGH_RES_TIMERS are not enabled. But in general, it seems that there must be other code in the kernel (maybe sound/?) that is relying on having high-enough HZ or hrtimers but that's not documented anywhere. Whenever you disable it you probably need to know what you're doing and what your workload is; so the dependency is not particularly interesting, and we can just remove it. Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Message-ID: <20240821095127.45d17b19@gandalf.local.home> [Added the last two paragraphs to the commit message. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-09-05tracing/timerlat: Add interface_lock around clearing of kthread in ↵Steven Rostedt
stop_kthread() The timerlat interface will get and put the task that is part of the "kthread" field of the osn_var to keep it around until all references are released. But here's a race in the "stop_kthread()" code that will call put_task_struct() on the kthread if it is not a kernel thread. This can race with the releasing of the references to that task struct and the put_task_struct() can be called twice when it should have been called just once. Take the interface_lock() in stop_kthread() to synchronize this change. But to do so, the function stop_per_cpu_kthreads() needs to change the loop from for_each_online_cpu() to for_each_possible_cpu() and remove the cpu_read_lock(), as the interface_lock can not be taken while the cpu locks are held. The only side effect of this change is that it may do some extra work, as the per_cpu variables of the offline CPUs would not be set anyway, and would simply be skipped in the loop. Remove unneeded "return;" in stop_kthread(). Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tomas Glozar <tglozar@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Link: https://lore.kernel.org/20240905113359.2b934242@gandalf.local.home Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05tracing/timerlat: Only clear timer if a kthread existsSteven Rostedt
The timerlat tracer can use user space threads to check for osnoise and timer latency. If the program using this is killed via a SIGTERM, the threads are shutdown one at a time and another tracing instance can start up resetting the threads before they are fully closed. That causes the hrtimer assigned to the kthread to be shutdown and freed twice when the dying thread finally closes the file descriptors, causing a use-after-free bug. Only cancel the hrtimer if the associated thread is still around. Also add the interface_lock around the resetting of the tlat_var->kthread. Note, this is just a quick fix that can be backported to stable. A real fix is to have a better synchronization between the shutdown of old threads and the starting of new ones. Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Link: https://lore.kernel.org/20240905085330.45985730@gandalf.local.home Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Reported-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05tracing/osnoise: Use a cpumask to know what threads are kthreadsSteven Rostedt
The start_kthread() and stop_thread() code was not always called with the interface_lock held. This means that the kthread variable could be unexpectedly changed causing the kthread_stop() to be called on it when it should not have been, leading to: while true; do rtla timerlat top -u -q & PID=$!; sleep 5; kill -INT $PID; sleep 0.001; kill -TERM $PID; wait $PID; done Causing the following OOPS: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:hrtimer_active+0x58/0x300 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f RSP: 0018:ffff88811d97f940 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28 FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0 Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x154/0x230 ? asm_exc_general_protection+0x26/0x30 ? hrtimer_active+0x58/0x300 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_locks_remove_file+0x10/0x10 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x8e/0x1f0 ? security_file_release+0x43/0x80 __fput+0x372/0xb10 task_work_run+0x11e/0x1f0 ? _raw_spin_lock+0x85/0xe0 ? __pfx_task_work_run+0x10/0x10 ? poison_slab_object+0x109/0x170 ? do_exit+0x7a0/0x24b0 do_exit+0x7bd/0x24b0 ? __pfx_migrate_enable+0x10/0x10 ? __pfx_do_exit+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x64/0x140 ? _raw_spin_lock_irq+0x86/0xe0 do_group_exit+0xb0/0x220 get_signal+0x17ba/0x1b50 ? vfs_read+0x179/0xa40 ? timerlat_fd_read+0x30b/0x9d0 ? __pfx_get_signal+0x10/0x10 ? __pfx_timerlat_fd_read+0x10/0x10 arch_do_signal_or_restart+0x8c/0x570 ? __pfx_arch_do_signal_or_restart+0x10/0x10 ? vfs_read+0x179/0xa40 ? ksys_read+0xfe/0x1d0 ? __pfx_ksys_read+0x10/0x10 syscall_exit_to_user_mode+0xbc/0x130 do_syscall_64+0x74/0x110 ? __pfx___rseq_handle_notify_resume+0x10/0x10 ? __pfx_ksys_read+0x10/0x10 ? fpregs_restore_userregs+0xdb/0x1e0 ? fpregs_restore_userregs+0xdb/0x1e0 ? syscall_exit_to_user_mode+0x116/0x130 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7ff0070eca9c Code: Unable to access opcode bytes at 0x7ff0070eca72. RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008 </TASK> Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core ---[ end trace 0000000000000000 ]--- This is because it would mistakenly call kthread_stop() on a user space thread making it "exit" before it actually exits. Since kthreads are created based on global behavior, use a cpumask to know when kthreads are running and that they need to be shutdown before proceeding to do new work. Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/ This was debugged by using the persistent ring buffer: Link: https://lore.kernel.org/all/20240823013902.135036960@goodmis.org/ Note, locking was originally used to fix this, but that proved to cause too many deadlocks to work around: https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@gandalf.local.home/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Link: https://lore.kernel.org/20240904103428.08efdf4c@gandalf.local.home Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Reported-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05hv: vmbus: Constify struct kobj_type and struct attribute_groupHongbo Li
vmbus_chan_group and vmbus_chan_type are not modified. They are only used in the helpers which take a const type parameter. Constifying these structures and moving them to a read-only section can increase over all security. ``` [Before] text data bss dec hex filename 20568 4699 48 25315 62e3 drivers/hv/vmbus_drv.o [After] text data bss dec hex filename 20696 4571 48 25315 62e3 drivers/hv/vmbus_drv.o ``` Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Reviewed-by: Naman Jain <namjain@linux.microsoft.com> Link: https://lore.kernel.org/r/20240904011553.2010203-1-lihongbo22@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240904011553.2010203-1-lihongbo22@huawei.com>
2024-09-05Merge tag 'nvme-6.11-2024-09-05' of git://git.infradead.org/nvme into block-6.11Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.11 - Sparse fix on static symbol (Jinjie) - Misleading warning message fix (Keith) - TCP command allocation handling fix (Maurizio) - PCI tagset allocation handling fix (Keith) - Low-power quirk for Samsung (Georg) - Queue limits fix for zone devices (Christoph) - Target protocol behavior fix (Maurizio)" * tag 'nvme-6.11-2024-09-05' of git://git.infradead.org/nvme: nvmet: Identify-Active Namespace ID List command should reject invalid nsid nvme: set BLK_FEAT_ZONED for ZNS multipath disks nvme-pci: Add sleep quirk for Samsung 990 Evo nvme-pci: allocate tagset on reset if necessary nvmet-tcp: fix kernel crash if commands allocation fails nvme: use better description for async reset reason nvmet: Make nvmet_debugfs static
2024-09-05ALSA: hda/realtek - Fix inactive headset mic jack for ASUS Vivobook 15 X1504VAPVasiliy Kovalev
When the headset is connected, there is no automatic switching of the capture source - you can only manually select the headset microphone in pavucontrol. This patch fixes/activates the inactive microphone of the headset. Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240905140211.937385-1-kovalev@altlinux.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-09-05eventfs: Use list_del_rcu() for SRCU protected list variableSteven Rostedt
Chi Zhiling reported: We found a null pointer accessing in tracefs[1], the reason is that the variable 'ei_child' is set to LIST_POISON1, that means the list was removed in eventfs_remove_rec. so when access the ei_child->is_freed, the panic triggered. by the way, the following script can reproduce this panic loop1 (){ while true do echo "p:kp submit_bio" > /sys/kernel/debug/tracing/kprobe_events echo "" > /sys/kernel/debug/tracing/kprobe_events done } loop2 (){ while true do tree /sys/kernel/debug/tracing/events/kprobes/ done } loop1 & loop2 [1]: [ 1147.959632][T17331] Unable to handle kernel paging request at virtual address dead000000000150 [ 1147.968239][T17331] Mem abort info: [ 1147.971739][T17331] ESR = 0x0000000096000004 [ 1147.976172][T17331] EC = 0x25: DABT (current EL), IL = 32 bits [ 1147.982171][T17331] SET = 0, FnV = 0 [ 1147.985906][T17331] EA = 0, S1PTW = 0 [ 1147.989734][T17331] FSC = 0x04: level 0 translation fault [ 1147.995292][T17331] Data abort info: [ 1147.998858][T17331] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1148.005023][T17331] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1148.010759][T17331] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1148.016752][T17331] [dead000000000150] address between user and kernel address ranges [ 1148.024571][T17331] Internal error: Oops: 0000000096000004 [#1] SMP [ 1148.030825][T17331] Modules linked in: team_mode_loadbalance team nlmon act_gact cls_flower sch_ingress bonding tls macvlan dummy ib_core bridge stp llc veth amdgpu amdxcp mfd_core gpu_sched drm_exec drm_buddy radeon crct10dif_ce video drm_suballoc_helper ghash_ce drm_ttm_helper sha2_ce ttm sha256_arm64 i2c_algo_bit sha1_ce sbsa_gwdt cp210x drm_display_helper cec sr_mod cdrom drm_kms_helper binfmt_misc sg loop fuse drm dm_mod nfnetlink ip_tables autofs4 [last unloaded: tls] [ 1148.072808][T17331] CPU: 3 PID: 17331 Comm: ls Tainted: G W ------- ---- 6.6.43 #2 [ 1148.081751][T17331] Source Version: 21b3b386e948bedd29369af66f3e98ab01b1c650 [ 1148.088783][T17331] Hardware name: Greatwall GW-001M1A-FTF/GW-001M1A-FTF, BIOS KunLun BIOS V4.0 07/16/2020 [ 1148.098419][T17331] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1148.106060][T17331] pc : eventfs_iterate+0x2c0/0x398 [ 1148.111017][T17331] lr : eventfs_iterate+0x2fc/0x398 [ 1148.115969][T17331] sp : ffff80008d56bbd0 [ 1148.119964][T17331] x29: ffff80008d56bbf0 x28: ffff001ff5be2600 x27: 0000000000000000 [ 1148.127781][T17331] x26: ffff001ff52ca4e0 x25: 0000000000009977 x24: dead000000000100 [ 1148.135598][T17331] x23: 0000000000000000 x22: 000000000000000b x21: ffff800082645f10 [ 1148.143415][T17331] x20: ffff001fddf87c70 x19: ffff80008d56bc90 x18: 0000000000000000 [ 1148.151231][T17331] x17: 0000000000000000 x16: 0000000000000000 x15: ffff001ff52ca4e0 [ 1148.159048][T17331] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 1148.166864][T17331] x11: 0000000000000000 x10: 0000000000000000 x9 : ffff8000804391d0 [ 1148.174680][T17331] x8 : 0000000180000000 x7 : 0000000000000018 x6 : 0000aaab04b92862 [ 1148.182498][T17331] x5 : 0000aaab04b92862 x4 : 0000000080000000 x3 : 0000000000000068 [ 1148.190314][T17331] x2 : 000000000000000f x1 : 0000000000007ea8 x0 : 0000000000000001 [ 1148.198131][T17331] Call trace: [ 1148.201259][T17331] eventfs_iterate+0x2c0/0x398 [ 1148.205864][T17331] iterate_dir+0x98/0x188 [ 1148.210036][T17331] __arm64_sys_getdents64+0x78/0x160 [ 1148.215161][T17331] invoke_syscall+0x78/0x108 [ 1148.219593][T17331] el0_svc_common.constprop.0+0x48/0xf0 [ 1148.224977][T17331] do_el0_svc+0x24/0x38 [ 1148.228974][T17331] el0_svc+0x40/0x168 [ 1148.232798][T17331] el0t_64_sync_handler+0x120/0x130 [ 1148.237836][T17331] el0t_64_sync+0x1a4/0x1a8 [ 1148.242182][T17331] Code: 54ffff6c f9400676 910006d6 f9000676 (b9405300) [ 1148.248955][T17331] ---[ end trace 0000000000000000 ]--- The issue is that list_del() is used on an SRCU protected list variable before the synchronization occurs. This can poison the list pointers while there is a reader iterating the list. This is simply fixed by using list_del_rcu() that is specifically made for this purpose. Link: https://lore.kernel.org/linux-trace-kernel/20240829085025.3600021-1-chizhiling@163.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20240904131605.640d42b1@gandalf.local.home Fixes: 43aa6f97c2d03 ("eventfs: Get rid of dentry pointers without refcounts") Reported-by: Chi Zhiling <chizhiling@kylinos.cn> Tested-by: Chi Zhiling <chizhiling@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05tracing: Avoid possible softlockup in tracing_iter_reset()Zheng Yejian
In __tracing_open(), when max latency tracers took place on the cpu, the time start of its buffer would be updated, then event entries with timestamps being earlier than start of the buffer would be skipped (see tracing_iter_reset()). Softlockup will occur if the kernel is non-preemptible and too many entries were skipped in the loop that reset every cpu buffer, so add cond_resched() to avoid it. Cc: stable@vger.kernel.org Fixes: 2f26ebd549b9a ("tracing: use timestamp to determine start of latency traces") Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05arm64: stacktrace: fix the usage of ftrace_graph_ret_addr()Puranjay Mohan
ftrace_graph_ret_addr() takes an 'idx' integer pointer that is used to optimize the stack unwinding process. arm64 currently passes `NULL` for this parameter which stops it from utilizing these optimizations. Further, the current code for ftrace_graph_ret_addr() will just return the passed in return address if it is NULL which will break this usage. Pass a valid integer pointer to ftrace_graph_ret_addr() similar to x86_64's stack unwinder. Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Fixes: 29c1c24a2707 ("function_graph: Fix up ftrace_graph_ret_addr()") Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20240618162342.28275-1-puranjay@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-09-05xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc()Maciej Fijalkowski
We have STAT_FILL_EMPTY test case in xskxceiver that tries to process traffic with fill queue being empty which currently fails for zero copy ice driver after it started to use xsk_buff_can_alloc() API. That is because xsk_queue::queue_empty_descs is currently only increased from alloc APIs and right now if driver sees that xsk_buff_pool will be unable to provide the requested count of buffers, it bails out early, skipping calls to xsk_buff_alloc{_batch}(). Mentioned statistic should be handled in xsk_buff_can_alloc() from the very beginning, so let's add this logic now. Do it by open coding xskq_cons_has_entries() and bumping queue_empty_descs in the middle when fill queue currently has no entries. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20240904162808.249160-1-maciej.fijalkowski@intel.com
2024-09-05Merge branch 'add-driver-for-motorcomm-yt8821-2-5g-ethernet-phy'Paolo Abeni
Frank Sae says: ==================== Add driver for Motorcomm yt8821 2.5G ethernet phy yt8521 and yt8531s as Gigabit transceiver use bit15:14(bit9 reserved default 0) as phy speed mask, yt8821 as 2.5G transceiver uses bit9 bit15:14 as phy speed mask. Be compatible to yt8821, reform phy speed mask and phy speed macro. Based on update above, add yt8821 2.5G phy driver. ==================== Link: https://patch.msgid.link/20240901083526.163784-1-Frank.Sae@motor-comm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-05net: phy: Add driver for Motorcomm yt8821 2.5G ethernet phyFrank Sae
Add a driver for the motorcomm yt8821 2.5G ethernet phy. Verified the driver on BPI-R3(with MediaTek MT7986(Filogic 830) SoC) development board, which is developed by Guangdong Bipai Technology Co., Ltd.. yt8821 2.5G ethernet phy works in AUTO_BX2500_SGMII or FORCE_BX2500 interface, supports 2.5G/1000M/100M/10M speeds, and wol(magic package). Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> Reviewed-by: Sai Krishna <saikrishnag@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-05net: phy: Optimize phy speed mask to be compatible to yt8821Frank Sae
yt8521 and yt8531s as Gigabit transceiver use bit15:14(bit9 reserved default 0) as phy speed mask, yt8821 as 2.5G transceiver uses bit9 bit15:14 as phy speed mask. Be compatible to yt8821, reform phy speed mask and phy speed macro. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-05Merge tag 'linux-can-next-for-6.12-20240904-2' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2024-09-04-2 this is a pull request of 18 patches for net-next/master. All 18 patches add support for CAN-FD IP core found on Rockchip RK3568. The first patch is co-developed by Elaine Zhang and me and adds DT bindings documentation. The remaining 17 patches are by me and add the driver in several stages. linux-can-next-for-6.12-20240904-2 * tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: rockchip_canfd: add support for CAN_CTRLMODE_BERR_REPORTING can: rockchip_canfd: add support for CAN_CTRLMODE_LOOPBACK can: rockchip_canfd: add hardware timestamping support can: rockchip_canfd: enable full TX-FIFO depth of 2 can: rockchip_canfd: prepare to use full TX-FIFO depth can: rockchip_canfd: add stats support for errata workarounds can: rockchip_canfd: rkcanfd_get_berr_counter_corrected(): work around broken {RX,TX}ERRORCNT register can: rockchip_canfd: implement workaround for erratum 12 can: rockchip_canfd: implement workaround for erratum 6 can: rockchip_canfd: add TX PATH can: rockchip_canfd: rkcanfd_register_done(): add warning for erratum 5 can: rockchip_canfd: rkcanfd_handle_rx_int_one(): implement workaround for erratum 5: check for empty FIFO can: rockchip_canfd: add notes about known issues can: rockchip_canfd: add support for rk3568v3 can: rockchip_canfd: add quirk for broken CAN-FD support can: rockchip_canfd: add quirks for errata workarounds can: rockchip_canfd: add driver for Rockchip CAN-FD controller dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller ==================== Link: https://patch.msgid.link/20240904130256.1965582-1-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-05spi: spi-fsl-lpspi: Fix off-by-one in prescale maxStefan Wahren
The commit 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register") doesn't implement the prescaler maximum as intended. The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP it should be 7. So this needs also a adjustment of the comparison in the scldiv calculation. Fixes: 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.net Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-05ptp: ptp_idt82p33: Convert comma to semicolonChen Ni
Replace comma between expressions with semicolons. Using a ',' in place of a ';' can have unintended side effects. Although that is not the case here, it is seems best to use ';' unless ',' is intended. Found by inspection. No functional change intended. Compile tested only. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240904015003.1065872-1-nichen@iscas.ac.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-05wifi: mt76: mt7996: set correct value in beamforming mcu command for mt7992Howard Hsu
Configure correct bf number and bitmap in beamforming mcu command for mt7992 chipsets, which only support dual-band. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-8-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-05wifi: mt76: mt7996: fix EHT beamforming capability checkHoward Hsu
If a VIF acts as a beamformer, it should check peer's beamformee capability, and vice versa. Fixes: ba01944adee9 ("wifi: mt76: mt7996: add EHT beamforming support") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-7-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-05wifi: mt76: mt7996: set correct beamformee SS capabilityHoward Hsu
According to IEEE P802.11be/D6.0 Table 9-417n, beamformee SS field stands for the maximum number of spatial streams that the STA can receive in an EHT sounding NDP minus 1, and the minimum value of this field is 3. This value indicates the decoding capability of a beamformee, which is independent of current antenna settings. Correct the value for mt7996 and mt7992 chipsets based on their HW capability. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-6-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-05wifi: mt76: mt7996: fix HE and EHT beamforming capabilitiesHoward Hsu
Fix HE and EHT beamforming capabilities for different bands and interface types. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Fixes: 348533eb968d ("wifi: mt76: mt7996: add EHT capability init") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-5-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-05wifi: mt76: mt7996: advertize beacon_int_min_gcdPeter Chiu
Advertize beacon_int_min_gcd as 100 to allow setting different beacon intervals on different interfaces. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-4-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-05wifi: mt76: mt7996: fix wmm set of station interface to 3Peter Chiu
According to connac3 HW design, the WMM index of AP and STA interface should be 0 and 3, respectively. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-3-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-05wifi: mt76: mt7996: fix traffic delay when switching back to working channelPeter Chiu
During scanning, UNI_CHANNEL_RX_PATH tag is necessary for the firmware to properly stop and resume MAC TX queue. Without this tag, HW needs more time to resume traffic when switching back to working channel. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-2-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-14 20:32:48 +0000