| Age | Commit message (Collapse) | Author |
|---|
|
In order to use a device as interrupt controller, it needs to be marked
with the DT interrupt-controller property. This commit adds rudimentary
documentation about the required standard properties and describes the
most commonly used interrupt specifiers.
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
Pull GFS2 updates from Steven Whitehouse:
"The major feature this time is the "rbm" conversion in the resource
group code. The new struct gfs2_rbm specifies the location of an
allocatable block in (resource group, bitmap, offset) form. There are
a number of added helper functions, and later patches then rewrite
some of the resource group code in terms of this new structure. Not
only does this give us a nice code clean up, but it also removes some
of the previous restrictions where extents could not cross bitmap
boundaries, for example.
In addition to that, there are a few bug fixes and clean ups, but the
rbm work is by far the majority of this patch set in terms of number
of changed lines."
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (27 commits)
GFS2: Write out dirty inode metadata in delayed deletes
GFS2: fix s_writers.counter imbalance in gfs2_ail_empty_gl
GFS2: Fix infinite loop in rbm_find
GFS2: Consolidate free block searching functions
GFS2: Get rid of I_MUTEX_QUOTA usage
GFS2: Stop block extents at the end of bitmaps
GFS2: Fix unclaimed_blocks() wrapping bug and clean up
GFS2: Improve block reservation tracing
GFS2: Fall back to ignoring reservations, if there are no other blocks left
GFS2: Fix ->show_options() for statfs slow
GFS2: Use rbm for gfs2_setbit()
GFS2: Use rbm for gfs2_testbit()
GFS2: Eliminate unnecessary check for state > 3 in bitfit
GFS2: Eliminate redundant calls to may_grant
GFS2: Combine functions gfs2_glock_dq_wait and wait_on_demote
GFS2: Combine functions gfs2_glock_wait and wait_on_holder
GFS2: inline __gfs2_glock_schedule_for_reclaim
GFS2: change function gfs2_direct_IO to use a normal gfs2_glock_dq
GFS2: rbm code cleanup
GFS2: Fix case where reservation finished at end of rgrp
...
|
|
As follow-up to "dt: introduce of_get_child_by_name to get child node by
name." patch, This patch removes some of the code duplication in the
driver by replacing it with of_get_child_by_name instead.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
This patch introduces of_get_child_by_name function to get a child node
by its name in a given parent node.
Without this patch each driver code has to iterate the parent and do
a string compare, However having of_get_child_by_name libary function would
avoid code duplication, errors and is more convenient.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
|
|
smsc ece1099 is a keyboard scan or gpio expansion device.
The patch create keypad and gpio expander child for this
multi function smsc driver.
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
Conflicts:
drivers/hid/hid-multitouch.c
|
|
Conflicts:
drivers/hid/usbhid/hid-quirks.c
|
|
'uclogic', 'wacom' and 'wiimote' into for-linus
|
|
The current SPI driver has many issues. Examples are:
* Segfaulting on most transfers due to expecting all transfers to have
both RX and TX buffers.
* Hanging on TX transfers since the whole driver flow is driven by RX
DMA completion, but the HW is only told to enable RX for RX transfers.
* Use of clk_disable_unprepare() from atomic context.
* Once those and other minor issues are fixed, the driver still doesn't
actually work.
* The driver also implements a deprecated API to the SPI core.
For this reason, simply remove the driver completely. This has two
advantages:
1) This will remove the last use of Tegra's <mach/dma.h>, which will
allow that file to be removed, which is required for single zImage
work.
2) The downstream driver is significaly different from the current
code. I believe a patch to re-add the downstream driver (with
appropriate cleanup) will be much simpler to review if it's a new
file rather than randomly interspered with essentially unrelated
existing code.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
|
|
tda1004x doesn't allow firmware loads while it is busy with something
else. Avoid it to happen by locking the I2C bus during firmware transfer.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Besides the CPU and DDR PLLs, the CPU and DDR frequencies
can be derived from other PLLs in the SRIF block on the
AR934x SoCs. The current code does not checks if the SRIF
PLLs are used and this can lead to incorrectly calculated
CPU/DDR frequencies.
Fix it by calculating the frequencies from SRIF PLLs if
those are used on a given board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: <stable@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4324/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The current dividers in the code are wrong and this
leads to broken CPU frequency calculation on boards
where the fractional part is used.
For example, if the SoC is running from a 40MHz
reference clock, refdiv=1, nint=14, outdiv=0 and
nfrac=31 the real frequency is 579.375MHz but the
current code calculates 569.687MHz instead.
Because the system time is indirectly related to
the CPU frequency the broken computation causes
drift in the system time.
The correct divider is 2^6 for the CPU PLL and 2^10
for the DDR PLL. Use the correct values to fix the
issue.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4305/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
While calculating the mac address the pointer for the current octet was
never reset back to the least significant one after being decremented
because of an octet overflow. This resulted in the code continuing to
increment at the current octet, potentially generating duplicate or
invalid mac addresses.
As a second issue the pointer was allowed to advance up to the most
significant octet, modifying the OUI, and potentially changing the type
of mac address.
Rewrite the code so it resets the pointer to the least significant
in each outer loop step, and bails out when the least significant octet
of the OUI is reached.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Patchwork: https://patchwork.linux-mips.org/patch/4348/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
b01da9f1 ("MIPS: Prune some target specific code out of prom.c") removed
the generic implementation of device_tree_init, breaking the kernel
build when manually selecting USE_OF.
Hide the config symbol so it can't be selected acidentially anymore.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/4346/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
In the current driver, the SENSE_PORT firmware command is issued as a
"wrapped" command, but the command handling code doesn't have a
wrapper, so it will never do anything other than log an error message.
The latest ConnectX-3 2.11.500 firmware reports the SENSE_PORT
capability even in multi-function (SR-IOV) mode, so the driver will
try to issue the command.
At least until the driver has a proper wrapper for SENSE_PORT, make
sure we disable the command for multi-function devices.
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Instead of having a hard-coded "PCI device ID != 0x1003" (which
obviously breaks as newer devices with ID != 0x1003 become available),
instead let's set a flag in our PCI device table for the older devices
where we're supposed to force using SENSE_PORT. This also avoids
enabling SENSE_PORT for virtual functions by mistake.
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
That way we can check flags later on, when we've finished with the
pci_device_id structure. Also convert the "is VF" flag to an enum:
"Never do in the preprocessor what can be done in C."
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
When a device is unplugged, wait for all processes that have opened the device
to close before deallocating the device.
Signed-off-by: Ratan Nalumasu <ratan@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when
there is an active listener on debugfs for events.
His change got lost while splitting hid_picolcd.c, restore it.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Fix the touch-up no response problem on GeneralTouch twofingers touchscreen and
modify the driver for new GeneralTouch PWT touchscreen.
Signed-off-by: Xianhan Yu <aroundight77@gmail.com>
Reviewed-by Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The Sony PS3 Blue-ray Disc Remote Control used to be supported by the
BlueZ project's user space, but the code that handled it was recently
removed as its functionality conflicted with a real HSP implementation
and the mapping was thought to be better handled in the kernel. This is
a port of the mapping logic from the fakehid driver by Marcel Holtmann
to the in-kernel HID layer.
We also add support for the Logitech Harmony Adapter for PS3, which
emulates the BD Remote.
Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The dev_rdesc member of the hid_device structure is meant to store the original
report descriptor received from the device, but it is currently passed to any
report_fixup method before it is copied to the rdesc member. This patch uses a
temporary buffer to shield dev_rdesc from the side effects of many HID drivers'
report_fixup implementations.
usbhid's hid_post_reset checks the report descriptor currently returned by the
device against a descriptor that may have been modified by a driver's
report_fixup method. That leaves some devices nonfunctional after a resume, with
a "reset_resume error 1" reported. This patch checks the new descriptor against
the unmodified dev_rdesc instead and uses the original, instead of modified,
report size.
BugLink: http://bugs.launchpad.net/bugs/1049623
Signed-off-by: Kevin Daughtridge <kevin@kdau.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The BCM2835 GPIO module is a combined GPIO controller, (GPIO) interrupt
controller, and pinmux/control device.
Original driver by Simon Arlott.
Rewrite including GPIO chip device by Chris Boot.
Upstreaming changes by Stephen Warren:
* Wrote DT binding documentation.
* Changed brcm,function to an integer to more directly match the
datasheet, and to match brcm,pins being an integer.
* Implemented pull-up/down pin config.
* Removed read-only DT property and related code. The restriction this
implemented are driven by the board, not the GPIO HW block, so don't
really make sense of a HW block binding, were in general incomplete
(since they could only know about the few pins hard-coded into the
Raspberry Pi B board design and not the uncommitted GPIOS), and are
better represented simply by not writing incorrect data into pin
configuration nodes.
* Don't set GPIO_IN function select in gpio_request_enable() to avoid
glitches; defer this to gpio_set_direction(). Consequently, removed
empty bcm2835_pmx_gpio_request_enable().
* Simplified enabled_irq_map[]; make it explicitly 1 entry per bank.
* Lifted use of enabled_irq_map[] outside the per-interrupt loop in
IRQ handler, thus fixing an issue where the code was indexing into
enabled_irq_map[] by intra-bank GPIO ID, not global GPIO ID.
* Removed locking in IRQ handler, since all other code uses
spin_lock_irqsave() and so guarantees it doesn't run concurrently
with the handler.
* Moved duplicated BUILD_BUG_ON()s into probe(). Also check size of
bcm2835_gpio_pins[].
* Remove range-checking from bcm2835_pctl_get_groups_count() since we've
decided to trust the pinctrl core.
* Made bcm2835_pmx_gpio_disable_free() call bcm2835_pinctrl_fsel_set()
directly for simplicity.
* Fixed body of dt_free_map() to match latest dt_node_to_map().
* Removed GPIO ownership check from bcm2835_pmx_enable() since the pinctrl
core owns doing this.
* Made irq_chip and pinctrl_gpio_range .name == MODULE_NAME so it's more
descriptive.
* Simplified remove(); removed call to non-existent
pinctrl_remove_gpio_range(), remove early return on error.
* Don't force gpiochip's base to 0. Set gpio_range.base to gpiochip's
base GPIO number.
* Error-handling cleanups in probe().
* Switched to module_platform_driver() rather than open-coding.
* Made pin, group, and function names lower-case.
* s/broadcom/brcm/ in DT property names.
* s/2708/2835/.
* Fixed a couple minor checkpatch warnings, and other minor cleanup.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This pure documentation fix tries to align the "idle" and
"sleep" pin states to the idle and suspend states from
runtime PM.
Cc: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We need to call scsi_done() for commands after we abort them.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
srp_free_req() uses the scsi_cmnd structure contents to unmap
buffers, so we must invoke srp_free_req() before we release
ownership of that structure.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Removing old variables caused a compile error from nes_debug().
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Hardware resource types are added and when a resource isn't available,
its type is printed.
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
When TX checksum offload is disabled for an iWarp connection,
skb->ip_summed needs to be set to CHECKSUM_NONE.
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
- Remove unnecessary statement "if (1)"
- Refactor a statement (wqe_misc |= NES_NIC_SQ_WQE_COMPLETION) out of
if/else statement, because it is independant of the flow.
- Define netdev->features in one line for clarity.
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
In TSO handling code, skb_shared_info() is used to get the MSS
instead of the bool function skb_is_gso() (which always returns 1).
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
On an SR-IOV master device, __mlx4_init_one() calls mlx4_init_hca()
before mlx4_multi_func_init(). However, for unlucky configurations,
mlx4_init_hca() might call mlx4_SENSE_PORT() (via mlx4_dev_cap()), and
that calls mlx4_cmd_imm() with MLX4_CMD_WRAPPED set.
However, on a multifunction device with MLX4_CMD_WRAPPED, __mlx4_cmd()
calls into mlx4_slave_cmd(), and that immediately tries to do
down(&priv->cmd.slave_sem);
but priv->cmd.slave_sem isn't initialized until mlx4_multi_func_init()
(which we haven't called yet). The next thing it tries to do is access
priv->mfunc.vhcr, but that hasn't been allocated yet.
Fix this by moving the initialization of slave_sem and vhcr up into
mlx4_cmd_init(). Also, since slave_sem is really just being used as a
mutex, convert it into a slave_cmd_mutex.
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Also put format string onto one line.
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
When we have VFs and PFs on same host, the VFs are activated within
the mlx4_core module before the mlx4_ib kernel module is loaded.
When the mlx4_ib module initializes the PF (master), it now creates
MAD paravirtualization contexts for any VFs that already active.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Previously, the structure of a guest's proxy QPs followed the
structure of the PPF special qps (qp0 port 1, qp0 port 2, qp1 port 1,
qp1 port 2, ...). The guest then did offset calculations on the
sqp_base qp number that the PPF passed to it in QUERY_FUNC_CAP().
This is now changed so that the guest does no offset calculations
regarding proxy or tunnel QPs to use. This change frees the PPF from
needing to adhere to a specific order in allocating proxy and tunnel
QPs.
Now QUERY_FUNC_CAP provides each port individually with its proxy
qp0, proxy qp1, tunnel qp0, and tunnel qp1 QP numbers, and these are
used directly where required (with no offset calculations).
To accomplish this change, several fields were added to the phys_caps
structure for use by the PPF and by non-SR-IOV mode:
base_sqpn -- in non-sriov mode, this was formerly sqp_start.
base_proxy_sqpn -- the first physical proxy qp number -- used by PPF
base_tunnel_sqpn -- the first physical tunnel qp number -- used by PPF.
The current code in the PPF still adheres to the previous layout of
sqps, proxy-sqps and tunnel-sqps. However, the PPF can change this
layout without affecting VF or (paravirtualized) PF code.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
This is necessary in order to support > 1 VF/PF in a VM for software
that uses the node guid as a discriminator, such as librdmacm.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Remove the error returns for IB ports from mlx4_ib_add,
mlx4_INIT_PORT_wrapper, and mlx4_CLOSE_PORT_wrapper.
Currently, SRIOV is supported only for devices for which the
link layer is IB on all ports; RoCE support will be added later.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
1. Allow only master to change node description.
2. Prevent AH leakage in send mads.
3. Take device part number from PCI structure, so that guests see the
VF part number (and not the PF part number).
4. Place the device revision ID into caps structure at startup.
5. SET_PORT in update_gids_task needs to go through wrapper on master.
6. In mlx4_ib_event(), PORT_MGMT_EVENT needs be handled in a work
queue on the master, since it propagates events to slaves using
GEN_EQE.
7. Do not support FMR on slaves.
8. Add spinlock to slave_event(), since it is called both in interrupt
context and in process context (due to 6 above, and also if
smp_snoop is used). This fix was found and implemented by Saeed
Mahameed <saeedm@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Normally, INIT_PORT and CLOSE_PORT are invoked when special QP0
transitions to RTR, or transitions to ERR/RESET respectively.
In SR-IOV mode, however, the master is also paravirtualized. This in
turn requires that we not do INIT_PORT until the entire QP0 path (real
QP0 and proxy QP0) is ready to receive. When the real QP0 goes down,
we should indicate that the port is not active.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
1. Slaves may not set the IS_SM capability for the port.
2. DEV_MGMT may not be set in multifunction mode.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
This directory is added only for the master -- slaves do not have it.
The sysfs iov directory is used to manage and examine the port P_Key
and guid paravirtualization.
Under iov/ports, the administrator may examine the gid and P_Key tables
as they are present in the device (and as are seen in the "network
view" presented to the SM).
Under the iov/<pci slot number> directories, the admin may map the
index numbers in the physical tables (as under iov/ports) to the
paravirtualized index numbers that guests see.
For example, if the administrator, for port 1 on guest 2 maps physical
pkey index 10 to virtual index 1, then that guest, whenever it uses
its pkey index 1, will actually be using the real pkey index 10.
Based on patch from Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
P_Key change and guid change events are not of interest to all slaves,
but only to those slaves which "see" the table slots whose contents
have change.
For example, if the guid at port 1, index 5 has changed in the PPF, we
wish to propagate the gid-change event only to the function which has
that guid index mapped to its port/guid table (in this case it is
slave #5). Other functions should not get the event, since the event
does not affect them.
Similarly with P_Keys -- P_Key change events are forwarded only to
slaves which have that P_Key index mapped to their virtual P_Key table.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
For IB ports, we paravirtualize the GUID at index 0 on slaves. The
GUID at index 0 seen by a slave is the actual GUID occupying the GUID
table at the slave-id index.
The driver, by default, requests at startup time that subnet manager
populate its entire guid table with GUIDs. These guids are then mapped
(paravirtualized) to the slaves, and appear for each slave as its GUID
at index 0.
Until each slave has such a guid, its port status is DOWN.
The guid table is cached to support special QP paravirtualization, and
event propagation to slaves on guid change (we test to see if the guid
really changed before propagating an event to the slave).
To support this caching, add capability to __mlx4_ib_query_gid() to
obtain the network view (i.e., physical view) gid at index X, not just
the host (paravirtualized) view.
Based on a patch from Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
For an IB port, a slave should not show port active until that slave
has a valid alias-guid (provided by the subnet manager). Therefore
the port-up event should be passed to a slave only after both the port
is up, and the slave's alias-guid has been set.
Also, provide the infrastructure for propagating port-management
events (client-reregister, etc) to slaves.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
In CM para-virtualization:
1. Incoming requests are steered to the correct vHCA according to the
embedded GID.
2. Communication IDs on outgoing requests are replaced by a globally
unique ID, generated by the PPF, since there is no synchronization
of ID generation between guests (and so these IDs are not
guaranteed to be globally unique). The guest's comm ID is stored,
and is returned to the response MAD when it arrives.
Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
MCG paravirtualization support includes:
- Creating multicast groups by VFs, and keeping accounting of them
- Leaving multicast groups by VFs
- Updating SM only with real changes in the overall picture of MCGs status
- Creation of MGID=0 groups (let SM choose MGID)
Note that the MCG module maintains its own internal MCG object
reference counts. The reason for this is that the IB core is used to
track only the multicast groups joins generated by the PF it runs
over. The PF IB core layer is unaware of slaves, so it cannot be used
to keep track of MCG joins they generate.
Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
