summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-29efi: Defer freeing boot services memory until after ACPI initJosh Triplett
Some new ACPI 5.0 tables reference resources stored in boot services memory, so keep that memory around until we have ACPI and can extract data from it. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: http://lkml.kernel.org/r/baaa6d44bdc4eb0c58e5d1b4ccd2c729f854ac55.1348876882.git.josh@joshtriplett.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-29Merge branch 'dt2' of git://github.com/hzhuang1/linux into next/dtOlof Johansson
From Haojian Zhuang: * 'dt2' of git://github.com/hzhuang1/linux: ARM: dt: mmp-dma: add binding file
2012-09-29Merge branch 'next/dt-samsung-new' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt2 From Kukjin Kim: * 'next/dt-samsung-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add nodes for dw_mmc controllers for Samsung EXYNOS5250 platforms ARM: EXYNOS: Add AUXDATA support for MSHC controllers ARM: EXYNOS: Add support for MSHC controller clocks ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen ARM: dts: use uart2 for console on smdkv310 and smdk5250 ARM: dts: Add basic dts file for Samsung Trats board ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4 ARM: dts: Assume status of all optional nodes as disabled for exynos4 ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsi
2012-09-29Merge branch 'samsung/pinctrl' into next/dt2Olof Johansson
* samsung/pinctrl: pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used gpio: exynos4: skip gpiolib registration if pinctrl driver is used pinctrl: add exynos4210 specific extensions for samsung pinctrl driver pinctrl: add samsung pinctrl and gpiolib driver
2012-09-29Merge branch 'samsung/boards' into next/dt2Olof Johansson
* samsung/boards: ARM: EXYNOS: Add generic PWM lookup support for SMDKV310 ARM: EXYNOS: Add generic PWM lookup support for SMDK4X12 ARM: EXYNOS: Use generic pwm driver in Origen board ARM: dts: Add heartbeat gpio-leds support to Origen ARM: dts: Use active low flag for gpio-keys on Origen ARM: S3C64XX: Register audio platform devices for Bells on Cragganmore ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore Add/add conflict in arch/arm/mach-exynos/mach-smdkv310.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-29Merge tag 'iommu-fixes-v3.6-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Two small patches: * One patch to fix the function declarations for !CONFIG_IOMMU_API. This is causing build errors in linux-next and should be fixed for v3.6. * Another patch to fix an IOMMU group related NULL pointer dereference." * tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix wrong assumption in iommu-group specific code iommu: static inline iommu group stub functions
2012-09-29Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds
Pull NVMe driver fixes from Matthew Wilcox: "Now that actual hardware has been released (don't have any yet myself), people are starting to want some of these fixes merged." Willy doesn't have hardware? Guys... * git://git.infradead.org/users/willy/linux-nvme: NVMe: Cancel outstanding IOs on queue deletion NVMe: Free admin queue memory on initialisation failure NVMe: Use ida for nvme device instance NVMe: Fix whitespace damage in nvme_init NVMe: handle allocation failure in nvme_map_user_pages() NVMe: Fix uninitialized iod compiler warning NVMe: Do not set IO queue depth beyond device max NVMe: Set block queue max sectors NVMe: use namespace id for nvme_get_features NVMe: replace nvme_ns with nvme_dev for user admin NVMe: Fix nvme module init when nvme_major is set NVMe: Set request queue logical block size
2012-09-29Merge tag 'please-pull-naveen' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras into x86/mce Pull MCE updates from Tony Luck: "Option to let the bios set per-bank CMCI thresholds so they can filter noisy error sources at a fine grained level based on platform specific knowledge." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-29mm/slab: Fix kmem_cache_alloc_node_trace() declarationEzequiel Garcia
This bug was introduced in commit 4052147 ("mm, slab: Match SLAB and SLUB kmem_cache_alloc_xxx_trace() prototype"). Cc: David Rientjes <rientjes@google.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-29Revert "mm/slab: Fix kmem_cache_alloc_node_trace() declaration"Pekka Enberg
This reverts commit 1e5965bf1f018cc30a4659fa3f1a40146e4276f6. Ezequiel Garcia has a better fix.
2012-09-29ext4: serialize truncate with owerwrite DIO workersDmitry Monakhov
Jan Kara have spotted interesting issue: There are potential data corruption issue with direct IO overwrites racing with truncate: Like: dio write truncate_task ->ext4_ext_direct_IO ->overwrite == 1 ->down_read(&EXT4_I(inode)->i_data_sem); ->mutex_unlock(&inode->i_mutex); ->ext4_setattr() ->inode_dio_wait() ->truncate_setsize() ->ext4_truncate() ->down_write(&EXT4_I(inode)->i_data_sem); ->__blockdev_direct_IO ->ext4_get_block ->submit_io() ->up_read(&EXT4_I(inode)->i_data_sem); # truncate data blocks, allocate them to # other inode - bad stuff happens because # dio is still in flight. In order to serialize with truncate dio worker should grab extra i_dio_count reference before drop i_mutex. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29ext4: endless truncate due to nonlocked dio readersDmitry Monakhov
If we have enough aggressive DIO readers, truncate and other dio waiters will wait forever inside inode_dio_wait(). It is reasonable to disable nonlock DIO read optimization during truncate. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29ext4: serialize unlocked dio reads with truncateDmitry Monakhov
Current serialization will works only for DIO which holds i_mutex, but nonlocked DIO following race is possible: dio_nolock_read_task truncate_task ->ext4_setattr() ->inode_dio_wait() ->ext4_ext_direct_IO ->ext4_ind_direct_IO ->__blockdev_direct_IO ->ext4_get_block ->truncate_setsize() ->ext4_truncate() #alloc truncated blocks #to other inode ->submit_io() #INFORMATION LEAK In order to serialize with unlocked DIO reads we have to rearrange wait sequence 1) update i_size first 2) if i_size about to be reduced wait for outstanding DIO requests 3) and only after that truncate inode blocks Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29ext4: serialize dio nonlocked reads with defrag workersDmitry Monakhov
Inode's block defrag and ext4_change_inode_journal_flag() may affect nonlocked DIO reads result, so proper synchronization required. - Add missed inode_dio_wait() calls where appropriate - Check inode state under extra i_dio_count reference. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29ext4: completed_io locking cleanupDmitry Monakhov
Current unwritten extent conversion state-machine is very fuzzy. - For unknown reason it performs conversion under i_mutex. What for? My diagnosis: We already protect extent tree with i_data_sem, truncate and punch_hole should wait for DIO, so the only data we have to protect is end_io->flags modification, but only flush_completed_IO and end_io_work modified this flags and we can serialize them via i_completed_io_lock. Currently all these games with mutex_trylock result in the following deadlock truncate: kworker: ext4_setattr ext4_end_io_work mutex_lock(i_mutex) inode_dio_wait(inode) ->BLOCK DEADLOCK<- mutex_trylock() inode_dio_done() #TEST_CASE1_BEGIN MNT=/mnt_scrach unlink $MNT/file fallocate -l $((1024*1024*1024)) $MNT/file aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file sleep 2 truncate -s 0 $MNT/file #TEST_CASE1_END Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286 This patch makes state machine simple and clean: (1) xxx_end_io schedule final extent conversion simply by calling ext4_add_complete_io(), which append it to ei->i_completed_io_list NOTE1: because of (2A) work should be queued only if ->i_completed_io_list was empty, otherwise the work is scheduled already. (2) ext4_flush_completed_IO is responsible for handling all pending end_io from ei->i_completed_io_list Flushing sequence consists of following stages: A) LOCKED: Atomically drain completed_io_list to local_list B) Perform extents conversion C) LOCKED: move converted io's to to_free list for final deletion This logic depends on context which we was called from. D) Final end_io context destruction NOTE1: i_mutex is no longer required because end_io->flags modification is protected by ei->ext4_complete_io_lock Full list of changes: - Move all completion end_io related routines to page-io.c in order to improve logic locality - Move open coded logic from various xx_end_xx routines to ext4_add_complete_io() - remove EXT4_IO_END_FSYNC - Improve SMP scalability by removing useless i_mutex which does not protect io->flags anymore. - Reduce lock contention on i_completed_io_lock by optimizing list walk. - Rename ext4_end_io_nolock to end4_end_io and make it static - Check flush completion status to ext4_ext_punch_hole(). Because it is not good idea to punch blocks from corrupted inode. Changes since V3 (in request to Jan's comments): Fall back to active flush_completed_IO() approach in order to prevent performance issues with nolocked DIO reads. Changes since V2: Fix use-after-free caused by race truncate vs end_io_work Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-28ext4: fix unwritten counter leakageDmitry Monakhov
ext4_set_io_unwritten_flag() will increment i_unwritten counter, so once we mark end_io with EXT4_END_IO_UNWRITTEN we have to revert it back on error path. - add missed error checks to prevent counter leakage - ext4_end_io_nolock() will clear EXT4_END_IO_UNWRITTEN flag to signal that conversion finished. - add BUG_ON to ext4_free_end_io() to prevent similar leakage in future. Visible effect of this bug is that unaligned aio_stress may deadlock Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-28ext4: give i_aiodio_unwritten a more appropriate nameDmitry Monakhov
AIO/DIO prefix is wrong because it account unwritten extents which also may be scheduled from buffered write endio Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-28ext4: ext4_inode_info dietDmitry Monakhov
Generic inode has unused i_private pointer which may be used as cur_aio_dio storage. TODO: If cur_aio_dio will be passed as an argument to get_block_t this allow to have concurent AIO_DIO requests. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29mfd: DA9055 core driverAshish Jangam
This is the DA9055 MFD core driver that instantiate all the dependent component drivers and provides them the device access via I2C. This patch is functionally tested on Samsung SMDK6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-28ipv6: return errno pointers consistently for fib6_add_1()Lin Ming
fib6_add_1() should consistently return errno pointers, rather than a mixture of NULL and errno pointers. Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller
Marc Kleine-Budde says: ==================== this pull request is for net-next, for the v3.7 release cycle. AnilKumar Ch contributed a fix for a segfault in the c_can driver, which is triggered by an earlier commit [1] in net-next (so no backport is needed). ... [1] 4cdd34b can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc75xx: add wol magic packet supportSteve Glendinning
This patch enables wake from system suspend on magic packet. Patch updated to change BUG_ON to WARN_ON_ONCE. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc75xx: enable power saving mode during system suspendSteve Glendinning
This patch instructs the device to enter its lowest power SUSPEND2 state during system suspend. This patch also explicitly wakes the device after resume, which should address reports of the device not automatically coming back after system suspend: Patch updated to change BUG_ON to WARN_ON_ONCE. http://code.google.com/p/chromium-os/issues/detail?id=31871 Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc75xx: add explicit test that device is READYSteve Glendinning
This patch adds an explicit test that the READY bit is set on the device when attempting to initialize it. If this bit is clear then the device hasn't succesfully started all its clocks, and this patch helps make the resulting logged error more helpful. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: add wol magic packet supportSteve Glendinning
This patch enables wake from system suspend on magic packet. Patch updated to replace BUG_ON with WARN_ON_ONCE and return. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: enable power saving mode during system suspendSteve Glendinning
This patch enables the device to enter its lowest power SUSPEND2 state during system suspend, instead of staying up using full power. Patch updated to not add two pointers to .suspend & .resume. Patch updated to replace BUG_ON with WARN_ON_ONCE and return. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: fix resume when usb device is resetSteve Glendinning
This patch fixes an issue on some systems, where after suspend the link is re-established but the ethernet interface does not resume. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: check return code from control messagesSteve Glendinning
This patch adds additional checks of the values returned by smsc95xx_(read|write)_reg, and wraps their common patterns in macros. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: remove unnecessary variablesSteve Glendinning
Removes unnecessary variables as smsc95xx_write_reg takes its value by parameter. Early versions passed this parameter by reference. Also replace hardcoded interrupt status value with a #define Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: sleep before read for lengthy operationsSteve Glendinning
During init, the device reset is unexpected to complete immediately, so sleep before testing the condition rather than after it. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-29mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device listVenu Byravarasu
Add RTC alarm interrupt details to TPS65910 MFD device list, to support RTC alarm events. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-28mfd: wm5110: Add register patches for revision BMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-28mfd: wm5110: Disable control interface error report for WM5110 rev BMark Brown
It can misreport. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-28cifs: obtain file access during backup intent lookup (resend)Shirish Pargaonkar
Rebased and resending the patch. Path based queries can fail for lack of access, especially during lookup during open. open itself would actually succeed becasue of back up intent bit but queries (either path or file handle based) do not have a means to specifiy backup intent bit. So query the file info during lookup using trans2 / findfirst / file_id_full_dir_info to obtain file info as well as file_id/inode value. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-28ARM: mvebu: fix build breaks from multi-platform conversionRob Herring
Moving ARCH_MVEBU for multi-platform support caused several breakages in recently added addr-map and pinctrl support for mvebu. This adds the necessary selects and include paths to fix the build. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28ARM: nomadik: remove NAND_NO_READRDY useArnd Bergmann
The nhk8815 board files uses NAND_NO_READRDY in its platform data, but this macro is getting removed because it was not being used anywhere. Without this patch, building nhk8815_defconfig results in: arch/arm/mach-nomadik/board-nhk8815.c:118:6: error: 'NAND_NO_READRDY' undeclared here (not in a function) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-28ARM: 7541/1: Add ARM ERRATA 775420 workaroundSimon Horman
arm: Add ARM ERRATA 775420 workaround Workaround for the 775420 Cortex-A9 (r2p2, r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance operation aborts with MMU exception, it might cause the processor to deadlock. This workaround puts DSB before executing ISB if an abort may occur on cache maintenance. Based on work by Kouei Abe and feedback from Catalin Marinas. Signed-off-by: Kouei Abe <kouei.abe.cp@rms.renesas.com> [ horms@verge.net.au: Changed to implementation suggested by catalin.marinas@arm.com ] Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-28sparc64: Fix trailing whitespace in NG4 memcpy.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge branch 'cleanup/__iomem' into next/cleanup2Arnd Bergmann
* cleanup/__iomem: ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses. ARM: ux500: use __iomem pointers for MMIO Two new cleanup patches that were not already part of the first cleanup branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses.Andrew Lunn
Also convert logical or to + for register offsets from base addresses. This fixes a number of warnings currently seen in linux-next: warning: passing argument 2 of '__raw_writeb' makes pointer from interger without cast. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28ARM: ux500: use __iomem pointers for MMIOArnd Bergmann
In the earlier sweeping changes, the ux500 uncompress.h file was missed because other problems were hiding this one. Without this patch, building u8500_defconfig results in: In file included from arch/arm/boot/compressed/misc.c:33:0: arch/arm/mach-ux500/include/mach/uncompress.h: In function 'putc': arch/arm/mach-ux500/include/mach/uncompress.h:32:2: warning: passing argument 1 of '__raw_readb' makes pointer from integer without a cast [enabled by default] arch/arm/include/asm/io.h:95:89: note: expected 'const volatile void *' but argument is of type 'u32' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-28ARM: shmobile: add new __iomem annotation for new codeArnd Bergmann
While we fixed up all instances that were already present in v3.6, this one came in through new code. Without this patch, building kzm9g_defconfig results in: arch/arm/mach-shmobile/board-kzm9g.c: In function 'kzm9g_restart': arch/arm/mach-shmobile/board-kzm9g.c:781:2: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast [enabled by default] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Cc: Simon Horman <horms@verge.net.au>
2012-09-28Merge branch 'bcmring/removal' into next/multiplatformArnd Bergmann
The removal of bcmring has non-obvious commits with the way the multiplatform configuration works, so merge it in here. Conflicts: arch/arm/Kconfig arch/arm/Makefile arch/arm/mach-bcmring/arch.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28Merge branch 'bcmring/removal' into next/cleanup2Arnd Bergmann
From "Christian Daudt" <csd@broadcom.com>: Remove mach-bcmring as this is no longer maintained or used. Updated the removal with: - drop the edit to mach-types requested by Russell King - eliminate defconfig mod from patch 1 requested Olof Johansson Also switched to using git send-email to avoid word-wrapping problems * bcmring/removal: ARM: Remove mach-bcmring Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28Merge branch 'bcmring/cleanup' into bcmring/removalArnd Bergmann
Doing a large-scale cleaning and removing the platform in another branch don't mix well, so do the trivial merge here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28ARM: Remove mach-bcmringArnd Bergmann
Remove mach-bcmring as this is no longer maintained or used. Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Jiandong Zheng <jdzheng@broadcom.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28Merge branch 'clps711x/cleanup' into next/cleanup2Arnd Bergmann
Various cleanups for the clps711x platform from Alexander Shiyan <shc_work@mail.ru> via email: * clps711x/cleanup: ARM: clps711x: Remove board support for CEIVA ARM: clps711x: Fix register definitions ARM: clps711x: Fix lowlevel debug-macro ARM: clps711x: Added simple clock framework Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28get_dvb_firmware: fix download site for tda10046 firmwareMauro Carvalho Chehab
The previous website doesn't exist anymore. Update it to one site that actually exists. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-28ARM: clps711x: Remove board support for CEIVAAlexander Shiyan
The current kernel does not fit in the CEIVA ROM. Also, some functional has already been removed due migrate from 2.6 to 3.0, and it seems that no one uses this platform. So, remove support for this board and modules specific only to this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
2012-09-28ARM: clps711x: Fix register definitionsAlexander Shiyan
This patch contain some fixes: - Fixes the address of register PORTE. - Corrects name for DAIDR0 register. - Removes unused definition for SYNCIO_CFGLEN. - Fixes definition SYNCIO_FRMLEN. Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
generated by cgit (git 2.34.1) at 2025-09-17 04:54:09 +0000