summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-05-15ARM: dts: am335x-boneblue: Use IRQ_TYPE specifierHernán Gonzalez
GPIO_ACTIVE_LOW was being used to specify an interrupt, use IRQ_TYPE_EDGE_RISING instead. This improves DT readability. Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15ARM: dts: am335x-baltos.dtsi: Use IRQ_TYPE specifierHernán Gonzalez
GPIO_ACTIVE_LOW was being used to specify an interrupt, use IRQ_TYPE_EDGE_RISING instead. This improves DT readability. Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15ARM: dts: am335x-baltos-ir5221: Use IRQ_TYPE specifierHernán Gonzalez
GPIO_ACTIVE_LOW was being used to specify an interrupt, use IRQ_TYPE_EDGE_RISING instead. This improves DT readability. Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15ARM: dts: am335x-baltos-ir3220: Use IRQ_TYPE specifierHernán Gonzalez
GPIO_ACTIVE_LOW was being used to specify an interrupt, use IRQ_TYPE_EDGE_RISING instead. This improves DT readability. Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15Revert "ARM: dts: am437x-sk-evm: Correct tps65218 irq type"Peter Ujfalusi
This reverts commit 561f9bcf268422ebe78a1739d86a255fd481c71c. While the correct IRQ level fixed the WARN_ON(), but prevented the probe of tps65218 as GIC_SPI does not support LEVEL_LOW (?) Use LEVEL_HIGH as it looks to be the accurate one since the INTn of TPS is connected to NMIn of the SoC. Fixes: 561f9bcf2684 ("ARM: dts: am437x-sk-evm: Correct tps65218 irq type") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15ARM: dts: am437x-epos-evm: Fixup (again) tps65218 irq typePeter Ujfalusi
While the correct IRQ level fixed the WARN_ON(), but prevented the probe of tps65218 as GIC_SPI does not support LEVEL_LOW (?) Use LEVEL_HIGH as it looks to be the accurate one since the INTn of TPS is connected to NMIn of the SoC. Fixes: 7a53a34622da ("ARM: dts: am437x-epos-evm: Correct tps65218 irq type") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15ARM: dts: am437x-cm-t43: Fixup (again) tps65218 irq typePeter Ujfalusi
While the correct IRQ level fixed the WARN_ON(), but prevented the probe of tps65218 as GIC_SPI does not support LEVEL_LOW (?) Use LEVEL_HIGH as it looks to be the accurate one since the INTn of TPS is connected to NMIn of the SoC. Fixes: b997f534b551 ("ARM: dts: am437x-cm-t43: Correct tps65218 irq type") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15ARM: dts: am437x-gp-evm: Fixup (again) tps65218 irq typePeter Ujfalusi
While the correct IRQ level fixed the WARN_ON(), but prevented the probe of tps65218 as GIC_SPI does not support LEVEL_LOW (?) Use LEVEL_HIGH as it looks to be the accurate one since the INTn of TPS is connected to NMIn of the SoC. Fixes: 5692b911c980 ("ARM: dts: am437x-gp-evm: Correct tps65218 irq type") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15ARM: dts: am335x-evmsk: Add phandle for the backlight for the panelPeter Ujfalusi
With the backlight phandle the driver can manage the backlight on/off in sync with the panel enable/disable. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15Merge branch 'omap-for-v4.18/dt-fixes' into omap-for-v4.18/dtTony Lindgren
2018-05-15ARM: dts: omap: fix OMAP3 CM-T3x OF graph video connectorsRob Herring
The OMAP3 CM-T3x based boards define 2 /connector nodes for S-Video and DVI output. However, since they have the same node name, the S-Video connector overwritten. This leaves a dangling graph connection which gives the following warning: arch/arm/boot/dts/omap3-sbc-t3517.dtb: Warning (graph_endpoint): /ocp@68000000/dss@48050000/encoder@48050c00/port/endpoint: graph connection to node '/connector/port/endpoint' is not bidirectional Fix this by renaming the nodes to s-video-connector and dvi-connector. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15ARM: dts: omap: fix OF graph in omap3-devkit8000Rob Herring
omap3-devkit8000-common.dtsi defines a graph connection for DVI, but then omap3-devkit8000-lcd-common.dtsi overrides that with a graph connection for the LCD as the same output signals are used. This leaves an incomplete graph as the TFP410 output has only half a connection. The result is the following warning: arch/arm/boot/dts/omap3-devkit8000-lcd70.dtb: Warning (graph_endpoint): /encoder0/ports/port@0/endpoint: graph connection to node '/ocp@68000000/dss@48050000/port/endpoint' is not bidirectional Fix this by defining multiple endpoints which is the correct way to show a 1 to many connection. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-15ARM: dts: exynos: Add support for audio over HDMI for Odroid X/X2/U3Sylwester Nawrocki
This patch switches Odroid X/X2/U3 to use dedicated Odroid audio subsystem DT bindings instead of the simple-card in order to add support for audio over HDMI. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-05-15arm64: dts: hi3798cv200: enable emmc support for poplar boardShawn Guo
It adds pinctrl device pinconf@8a21000, gpio-ranges for GPIO devices, and then enables eMMC support for Hi3798CV200 Poplar board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-15arm64: dts: hi3798cv200: enable usb2 support for poplar boardShawn Guo
It adds usb2 phy devices, and enables ehci/ohci support for Hi3798CV200 Poplar board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-15arm64: dts: hi3798cv200: enable PCIe support for poplar boardShawn Guo
It adds combophy devices under peripheral controller and enables PCIe support for Hi3798CV200 Poplar board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-15arm64: dts: hisi: Enable Hisi LPC node for hip07John Garry
The patch enables the HiSi LPC node for hip07, with the IPMI child device. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-15arm64: dts: hisi: Enable Hisi LPC node for hip06John Garry
The patch enables the HiSi LPC node for hip06, with IPMI and UART child devices. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-15arm64: dts: hi3660: Add pcie msi interrupt attributeYao Chen
Add pcie msi interrupt attribute for hi3660 SOC. Signed-off-by: Yao Chen <chenyao11@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-15arm64: dts: hi3660: Add thermal cooling managementTao Wang
Add nodes and properties for thermal cooling management support. Signed-off-by: Tao Wang <jean.wangtao@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-15arm64: dts: hi3660: Add CPU frequency scaling supportLeo Yan
Add two CPU OPP tables, one table is corresponding to one cluster, which allow CPU frequency scaling on hi3660 platforms. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-15arm64: dts: hi3660: Add stub clock nodeKaihua Zhong
Add stub clock node for hi3660 platform. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-15arm64: dts: hi3660: Add mailbox nodeKaihua Zhong
Add the mailbox controller node for hi3660 platform. Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-15dt-bindings: clock: reset: Add AXG AO Clock and Reset BindingsYixun Lan
Add dt-bindings headers for the Meson-AXG's AO clock and reset controller. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-15dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoCYixun Lan
Update the dt-binding documentation to support new compatible string for the Amlogic's Meson-AXG SoC. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-15ARM: dts: imx: Switch NXP boards to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-15dt-bindings: arm: document Renesas V3HSK board bindingsSergei Shtylyov
Document the V3H Starter Kit device tree bindings, listing it as a supported board. This allows to use checkpatch.pl to validate .dts files referring to the V3HSK board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-15ARM: dts: imx6qdl-phytec-pfla02: Use IRQ_TYPE specifierHernán Gonzalez
Replace magic number with the proper IRQ_TYPE specifier to improve DT readability. Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-15ARM: dts: imx53-voipac-dmm-668: Use IRQ_TYPE specifierHernán Gonzalez
Replace magic number with the proper IRQ_TYPE specifier to improve DT readability. Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-15ARM: dts: imx53-qsb: Use IRQ_TYPE specifierHernán Gonzalez
Replace magic number with the proper IRQ_TYPE specifier to improve DT readability. Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-15ARM: dts: vf-colibri-eval-v3: Use IRQ_TYPE specifierHernán Gonzalez
GPIO_ACTIVE_LOW was being used to specify an interrupt, use IRQ_TYPE_EDGE_RISING instead. This improves DT readability. Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-15arm64: dts: fsl-ls1012a: Fix DTC aliases warningsFabio Estevam
Use '-' instead of '_' to fix the following DTC warnings with W=1: arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-' Cc: Harninder Rai <harninder.rai@nxp.com> Cc: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14Merge tag 'samsung-dt64-4.18' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DTS ARM64 changes for v4.18 1. Fix DTC warnings. 2. Add mem-2-mem Scaler devices. * tag 'samsung-dt64-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add mem-2-mem Scaler devices arm64: dts: exynos: Remove unneeded address space mapping for soc node arm64: dts: exynos: Move syscon poweroff and restart nodes under the PMU Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'samsung-dt-4.18' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DTS ARM changes for v4.18 1. Add support for USB OTG port on Origen board. 2. Allow earlycon on Rinato board. 3. Cleanup from obsolete properties. 4. Fix DTC warnings. 5. Remove Exynos5440 entirely. 6. Add mem-2-mem Scaler devices. * tag 'samsung-dt-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Update x and y properties for mms114 touchscreen ARM: dts: exynos: Add mem-2-mem Scaler devices ARM: dts: s3c64xx: Remove skeleton.dtsi and fix DTC warnings for /memory ARM: dts: s3c24xx: Fix unnecessary address/size cells DTC warnings ARM: dts: s3c24xx: Remove skeleton.dtsi and fix DTC warning for /memory ARM: dts: exynos/s3c: Remove leading 0x and 0s from bindings notation ARM: dts: exynos: Remove Exynos5440 ARM: dts: exynos: Remove unnecessary address/size properties in dp-controller of Exynos5 ARM: dts: exynos: Bring order in fixed-regulators naming in Midas boards ARM: dts: exynos: Remove regulators node container in Origen and N710x ARM: dts: exynos: Remove unnecessary address/size properties in Origen ARM: dts: exynos: Remove unnecessary address/size properties in Midas boards ARM: dts: exynos: Fix invalid node referenced by i2c20 alias in Peach Pit and Pi ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMU ARM: dts: exynos: Remove obsolete clock properties from power domains ARM: dts: exynos: Add serial path for Rinato board to get earlycon support ARM: dts: exynos: Add support for USB OTG port on Origen board Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'gemini-dts-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt DTS updates for the Gemini: - Set righ flashes on DNS-313 - Activate ATA1 on NAS4220B - Set right harddisk triggers on the D-Link devices - Fix all DTC warnings * tag 'gemini-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Fix DTC warnings ARM: dts: Add second ATA to NAS4220B ARM: dts: Fix bootargs for Gemini D-Link devices ARM: dts: Fix the DNS-313 flash compatible ARM: dts: Set DNS-685 LEDs to use better triggers ARM: dtd: Set DNS-313 LEDs to use better triggers ARM: dts: gemini: Fix "debounce-interval" property misspelling Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'arm-soc/for-4.18/devicetree' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into next/dt This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.18, please pull the following: - Stefan provides updates to the BCM2835 RNG Device Tree binding and Device Tree node by adding its missing interrupt line. - Rafal switches the Luxul XWC-1000 and the D-Link DIR-885L to the new partitions syntax which allows specifying a partition parser - Rafal also updates a bunch of BCM5301X Device Tree source files to a more standard SPDX tag and dual GPL 2.0 and MIT. This is a follow-up to this discussion with Greg: https://lkml.org/lkml/2018/4/28/179 - Dan adds support for two Luxul devices: XAP-1610 (based on BCM47094) and XWR-3150 V1 (similar to XWR-3100) - Stefan provides a set of updates to the BCM283x Device Tree sources to support the Raspberry Pi 3 B+ for both the ARM and ARM64 kernels. He adds the required nodes for the LAN7515 USB Ethernet, Cypress CYW43455 BT/WiFi combo chip. Stefan also provides a few fixes for the PWM pin assignment for RPi 3B and Zero/Zero W. Finally, Stefan adds the missing GPIOs for controlling additional peripherals now that support for the RPi 3 GPIO expander has landed * tag 'arm-soc/for-4.18/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new partitions syntax ARM: dts: BCM5301X: Relicense Asus RT-AC87U file to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Add DT for Luxul XAP-1610 ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1 ARM: dts: BCM5301X: Relicense Buffalo files to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Relicense most DTS files to the GPL 2.0+ / MIT arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+ ARM: dts: bcm2837: Add Raspberry Pi 3 B+ dt-bindings: bcm: Add Raspberry Pi 3 B+ ARM: dts: bcm2837: Add missing GPIOs of Expander ARM: dts: bcm283x: Fix PWM pin assignment ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed partitions syntax ARM: bcm283x: Add missing interrupt for RNG block dt-binding: rng: Add interrupt property for BCM2835 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14ARM: dts: qcom-apq8064: use correct pci address for address translationNiklas Cassel
For PCI, the second and third cell in ranges specifies the upper and lower target address for address translation. This target address will be used to program the internal address translation unit (iATU). The current device tree configuration will program the iATU to translate CPU accesses to 0x08000000 to PCI address 0x0 (with TLP type MEM). The device tree configuration also specifies that CPU acesses to 0x0fe00000 will be translated to PCI address 0x0 (with TLP type I/O). We cannot have both I/O space and memory space at PCI address 0x0. The PCI code already uses the CPU address when assigning addresses to memory BARs, so for memory space the PCI address should be the same as the CPU address. This also matches how all other device trees using snps,dw-pcie are configured. The existing configuration appears to work, even if it is incorrect. For some reason the iATU doesn't obey the existing configuration, and doesn't translate CPU accesses from 0x08000000 to PCI address 0x0. The reason why the existing configuration works at all is probably because the default behavior, when there is no match, is to use the untranslated address. This happens to work for memory space, since it's a 1:1 mapping. However, instead of relying on this behavior, let's configure the iATU correctly. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-14ARM: dts: qcom-apq8064: fix gic_irq_domain_translate warningsThierry Escande
Remove the usage of IRQ_TYPE_NONE to fix loud warnings from patch (83a86fbb5b56b "irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE"). Signed-off-by: Thierry Escande <thierry.escande@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-14ARM: dts: Fix the RPM clock controller compatible stringLinus Walleij
The right string is msm8660 and there is also apq8060, but not apq8660, so fix this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-14ARM: dts: ipq4019: Add TZ and SMEM reserved regionsSven Eckelmann
The QSEE (trustzone) is started on IPQ4019 before Linux is started. According to QCA, it is placed in in the the memory region 0x87e80000-0x88000000 and must not be accessed directly. There is an additional memory region 0x87e00000-0x87E80000 smem which which can be used for communication with the TZ. The driver for the latter is not yet ready but it is still not allowed to use this memory region like any other memory region. Not reserving this memory region either leads to kernel crashes, kernel hangs (often during the boot) or bus errors for userspace programs. The latter happens when a program is using a memory region which is mapped to these physical memory regions. [ 571.758058] Unhandled fault: imprecise external abort (0xc06) at 0x01715ff8 [ 571.758099] pgd = cebec000 [ 571.763826] [01715ff8] *pgd=8e7fa835, *pte=87e7f75f, *ppte=87e7fc7f Bus error Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-14ARM: dts: qcom: pm8941: Add vadc nodes needed to estimate an ocvCraig Tatlor
vbat_sns is needed to estimate a fairly accurate on chip voltage and bat_therm is needed to produce an accurate percentage from the estimated ocv. Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-14ARM: dts: qcom-apq8064: disable i2c by default at soc dtsiSrinivas Kandagatla
This patch marks all the gsbi i2c node at soc level dtsi, so that kernel would not assume that its enabled and result in pin conflicts when gsbi is used for UART or SPI. Without this patch we see below pin conflict. apq8064-pinctrl 800000.pinctrl: pin GPIO_20 already requested by 12450000.serial; cannot claim for 12460000.i2c apq8064-pinctrl 800000.pinctrl: pin-20 (12460000.i2c) status -22 apq8064-pinctrl 800000.pinctrl: could not request pin 20 (GPIO_20) from group gpio20 on device 800000.pinctrl i2c_qup 12460000.i2c: Error applying setting, reverse things back i2c_qup: probe of 12460000.i2c failed with error -22 Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-14Merge tag 'omap-for-v4.18/dt-sdhci-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omap variants for SDHCI This series adds the devicetree configuration needed for pinctrl on dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs driver. To use SDHCI, both the pins and the iodelay needs to be configured. This series is based on the related SDHCI drivers changes on a branch set up by Ulf. * tag 'omap-for-v4.18/dt-sdhci-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (28 commits) Documentation: ARM: Add new MMC requirements for DRA7/K2G ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node ARM: dts: dra7: Use sdhci-omap programming model ARM: dts: dra76-evm: Add wilink8 wlan support ARM: dts: dra7-evm: Add wilink8 wlan support ARM: dts: dra7-evm: Model EVM_3V6 regulator ARM: dts: dra72-evm-common: Add wilink8 wlan support ARM: dts: am57xx-beagle-x15/am57xx-idk: Fix pinctrl-names ARM: dts: am574x-idk: Add pinmux configuration for MMC ARM: dts: dra71-evm: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown ARM: dts: am57xx-idk: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2 ARM: dts: dra72-evm-common: Remove mmc specific pinmux mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode dt-bindings: sdhci-omap: Add pinctrl bindings mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC dt-bindings: sdhci-omap: Add K2G specific binding mmc: sdhci-omap: Workaround for Errata i834 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14ARM: dts: stihxxx-b2120: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14ARM: dts: stih410: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14ARM: dts: stih407: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14ARM: dts: stih407-pinctrl: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14ARM: dts: stih407-family: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14ARM: dts: imx6q-gk802: Do not hardcode input codesFabio Estevam
Instead of hardcoding the input codes we can use the symbol name for better readability. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14ARM: dts: imx53-smd: Do not hardcode input codesFabio Estevam
Instead of hardcoding the input codes we can use the symbol name for better readability. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 09:46:17 +0000