summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-06-29net+crypto: Use vmalloc for zlib inflate buffers.David S. Miller
They are 64K and result in order-4 allocations, even with SLUB. Therefore, just like we always have for the deflate buffers, use vmalloc. Reported-by: Martin Jackson <mjackson220.list@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29netfilter: Fix ip_route_me_harder triggering ip_rt_bugJulian Anastasov
Avoid creating input routes with ip_route_me_harder. It does not work for locally generated packets. Instead, restrict sockets to provide valid saddr for output route (or unicast saddr for transparent proxy). For other traffic allow saddr to be unicast or local but if callers forget to check saddr type use 0 for the output route. The resulting handling should be: - REJECT TCP: - in INPUT we can provide addr_type = RTN_LOCAL but better allow rejecting traffic delivered with local route (no IP address => use RTN_UNSPEC to allow also RTN_UNICAST). - FORWARD: RTN_UNSPEC => allow RTN_LOCAL/RTN_UNICAST saddr, add fix to ignore RTN_BROADCAST and RTN_MULTICAST - OUTPUT: RTN_UNSPEC - NAT, mangle, ip_queue, nf_ip_reroute: RTN_UNSPEC in LOCAL_OUT - IPVS: - use RTN_LOCAL in LOCAL_OUT and FORWARD after SNAT to restrict saddr to be local Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29i2c/pca954x: Initialize the mux to disconnected statePetri Gynther
pca954x power-on default is channel 0 connected. If multiple pca954x muxes are connected to the same physical I2C bus, the parent bus will see channel 0 devices behind both muxes by default. This is bad. Scenario: -- pca954x @ 0x70 -- ch 0 (I2C-bus-101) -- EEPROM @ 0x50 | I2C-bus-1 --- | -- pca954x @ 0x71 -- ch 0 (I2C-bus-111) -- EEPROM @ 0x50 1. Load I2C bus driver: creates I2C-bus-1 2. Load pca954x driver: creates virtual I2C-bus-101 and I2C-bus-111 3. Load eeprom driver 4. Try to read EEPROM @ 0x50 on I2C-bus-101. The transaction will also bleed onto I2C-bus-111 because pca954x @ 0x71 channel 0 is connected by default. Fix: Initialize pca954x to disconnected state in pca954x_probe() Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-06-29i2c-taos-evm: Fix log messagesJean Delvare
* Print all error and information messages even when debugging is disabled. * Don't use adapter device to log messages before it is ready. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-06-29sh: fix the value of sh_dmae_slave_config in setup-sh7757Yoshihiro Shimoda
Fix the value of chcr for SCIF[2-4]_RX and RIIC[0-9]_RX and the value of mid_rid for some RIIC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-29sh: fix the INTC vector for IRQ and IRL in setup-sh7757Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-29KVM: x86 emulator: fix %rip-relative addressing with immediate source operandAvi Kivity
%rip-relative addressing is relative to the first byte of the next instruction, so we need to add %rip only after we've fetched any immediate bytes. Based on original patch by Li Xin <xin.li@intel.com>. Signed-off-by: Avi Kivity <avi@redhat.com> Acked-by: Li Xin <xin.li@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-29ALSA: HDMI - fix ELD monitor name lengthWu Fengguang
I noticed that the last character of the ELD monitor name is lost, this fixes the issue. This fix should be confirming to the HDA spec, and works together with the DRM part of the ELD patch. The HDA spec does not mention that Monitor_Name_String is an '\0' ending string, and it allows NML to be 1, which is only valid when MNL does not count the possible ending '\0'. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-29arch/powerpc: use printk_ratelimited instead of printk_ratelimitChristian Dietrich
Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited. Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/rtas-rtc: remove sideeffects of printk_ratelimitChristian Dietrich
Don't use printk_ratelimit() as an additional condition for returning on an error. Because when the ratelimit is reached, printk_ratelimit will return 0 and e.g. in rtas_get_boot_time won't check for an error condition. Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfigMichael Neuling
Remove duplicate assignment of SCSI_BNX2_ISCSI in pseries_defconfig introduced by: 37e0c21e powerpc/pseries: Enable iSCSI support for a number of cards causes warning: arch/powerpc/configs/pseries_defconfig:151:warning: override: reassigning to symbol SCSI_BNX2_ISCSI Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-28watchdog: update author email for at32ap700x_wdtHans-Christian Egtvedt
This patch updates the email address of the at32ap700x_wdt driver supported by me to an email account I will use on a more regular basis in the future. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28Merge branch 'drm-intel-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Use chipset-specific irq installers drm/i915: forcewake fix after reset drm/i915: add Ivy Bridge page flip support drm/i915: split page flip queueing into per-chipset functions
2011-06-28Merge branch 'driver-core-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Connector: Correctly set the error code in case of success when dispatching receive callbacks Connector: Set the CN_NETLINK_USERS correctly pti: PTI semantics fix in pti_tty_cleanup. pti: ENXIO error case memory leak PTI fix. pti: double-free security PTI fix drivers:misc: ti-st: fix skipping of change remote baud drivers/base/platform.c: don't mark platform_device_register_resndata() as __init_or_module st_kim: Handle case of no device found for ID 0 firmware: fix GOOGLE_SMI kconfig dependency warning
2011-06-28Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: MAINTAINERS: add myself as maintainer of USB/IP usb: r8a66597-hcd: fix cannot detect low/full speed device USB: ehci-ath79: fix a NULL pointer dereference USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c usb/isp1760: Fix bug preventing the unlinking of control urbs USB: Fix up URB error codes to reflect implementation. xhci: Always set urb->status to zero for isoc endpoints. xhci: Add reset on resume quirk for asrock p67 host xHCI 1.0: Incompatible Device Error USB: don't let errors prevent system sleep USB: don't let the hub driver prevent system sleep USB: change maintainership of ohci-hcd and ehci-hcd xHCI 1.0: Force Stopped Event(FSE) xhci: Don't warn about zeroed bMaxBurst descriptor field. USB: Free bandwidth when usb_disable_device is called. xhci: Reject double add of active endpoints. USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big. usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFO usb: musb: host: compare status for negative error values
2011-06-28Merge branch 'tty-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: bcm63xx_uart: fix irq storm after rx fifo overrun. amba pl011: platform data for reg lockup and glitch v2 amba pl011: workaround for uart registers lockup tty: n_gsm: improper skb_pull() use was leaking framed data tty: n_gsm: Fixed logic to decode break signal from modem status TTY: ntty, add one more sanity check TTY: ldisc, do not close until there are readers 8250: Fix capabilities when changing the port type 8250_pci: Fix missing const from merges ARM: SAMSUNG: serial: Fix on handling of one clock source for UART serial: ioremap warning fix for jsm driver. 8250_pci: add -ENODEV code for Intel EG20T PCH
2011-06-28Merge branch 'staging-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: comedi: fix build breakages on some platforms Staging: brcm80211: disable drivers except for X86 or MIPS platforms Staging: brcm80211: disable drivers for PPC platforms Staging: iio: Make IIO depend on GENERIC_HARDIRQS Staging: mei: fix suspend failure Staging: fix iio builds when IIO_RING_BUFFER is not enabled Staging: Comedi: Build only on arches providing PAGE_KERNEL_NOCACHE Staging: fix more iio builds when IIO_RING_BUFFER is not enabled
2011-06-28Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: avoid endless recovery loop when waiting for fail device to complete.
2011-06-28pnfs: write: Set mds_offset in the generic layer - it is needed by all LDsBoaz Harrosh
In current pnfs tree, all the layouts set mds_offset in their .write_pagelist member. mds_offset is only used by generic layer and should be handled by it. This patch is for upstream. It is needed in this -rc series to fix a bug in objects layout_commit. I'll send patches for objects and blocks to be squashed into current pnfs tree. TODO: It looks like the read path needs the same patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-28Bluetooth: Prevent buffer overflow in l2cap config requestDan Rosenberg
A remote user can provide a small value for the command size field in the command header of an l2cap configuration request, resulting in an integer underflow when subtracting the size of the configuration request header. This results in copying a very large amount of data via memcpy() and destroying the kernel heap. Check for underflow. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Cc: stable <stable@kernel.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-28drm/i915: Use chipset-specific irq installersChris Wilson
Konstantin Belousov pointed out that 4697995b98417 replaced the generic i915_driver_irq_*install() functions with chipset specific routines accessible only through driver->irq_*install(). So update the sanity check in i915_request_wait() to match. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-28drm/i915: forcewake fix after resetBen Widawsky
The failure is as follows: 1. Userspace gets forcewake lock, lock count >=1 2. GPU hang/reset occurs (forcewake bit is reset) 3. count is now incorrect The failure can only occur when using the forcewake userspace lock. This has the unfortunate consequence of messing up the driver as well as userspace, unless userspace closes the debugfs file, the kernel will never end up waking the GT since the refcount will be > 1. The solution is to try to recover the correct forcewake state based on the refcount. There is a period of time where userspace reads/writes may occur after the reset, before the GT has been forcewaked. The interface was never designed to be a perfect solution for userspace reads/writes, and the kernel portion is fixed by this patch. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-28proc: restrict access to /proc/PID/ioVasiliy Kulikov
/proc/PID/io may be used for gathering private information. E.g. for openssh and vsftpd daemons wchars/rchars may be used to learn the precise password length. Restrict it to processes being able to ptrace the target process. ptrace_may_access() is needed to prevent keeping open file descriptor of "io" file, executing setuid binary and gathering io information of the setuid'ed process. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28iwlagn: use PCI_DMA_* for pci_* operationsJohn W. Linville
"iwlagn: map command buffers BIDI" uses the DMA_* enumerations for DMA directions, even though the pci_* DMA API is still in use. That patch was undoubtedly developed on top of "iwlagn: don't use the PCI wrappers for DMA operation", which is due in the next release. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-28ALSA: atmel - update author email for ABDAC, AC97C and AT73C213Hans-Christian Egtvedt
This patch updates the email address of the sound drivers supported by me to an email account I will use on a more regular basis in the future. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: HDA: Add model=auto quirk for Acer Aspire 3830TGDavid Henningsson
Since we're not using the new auto parser as a fallback yet, add it manually as a quirk. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28ALSA: HDA: Add a new Conexant codec ID (506c)David Henningsson
Conexant ID 506c was found on Acer Aspire 3830TG. As users report no playback, sending to stable should be safe. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/783582 Reported-by: andROOM Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-28watchdog: gef_wdt: fix MODULE_ALIASAxel Lin
Remove the space between "platform:" prefix and the driver name. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28watchdog: Intel SCU Watchdog: Fix build and remove duplicate codeJesper Juhl
Trying to build the Intel SCU Watchdog fails for me with gcc 4.6.0 - $ gcc --version | head -n 1 gcc (GCC) 4.6.0 20110513 (prerelease) like this : CC drivers/watchdog/intel_scu_watchdog.o In file included from drivers/watchdog/intel_scu_watchdog.c:49:0: /home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h: In function ‘apbt_time_init’: /home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h:65:42: warning: ‘return’ with a value, in function returning void [enabled by default] drivers/watchdog/intel_scu_watchdog.c: In function ‘intel_scu_watchdog_init’: drivers/watchdog/intel_scu_watchdog.c:468:2: error: implicit declaration of function ‘sfi_get_mtmr’ [-Werror=implicit-function-declaration] drivers/watchdog/intel_scu_watchdog.c:468:32: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors make[1]: *** [drivers/watchdog/intel_scu_watchdog.o] Error 1 make: *** [drivers/watchdog/intel_scu_watchdog.o] Error 2 Additionally, linux/types.h is needlessly being included twice in drivers/watchdog/intel_scu_watchdog.c Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28watchdog: mtx1-wdt: fix section mismatchFlorian Fainelli
Fix section mismatch and remove unused variable 'tmp'. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28watchdog: mtx1-wdt: fix GPIO togglingFlorian Fainelli
Commit e391be76 (MIPS: Alchemy: Clean up GPIO registers and accessors) changed the way the GPIO was toggled. Prior to this patch, we would always actively drive the GPIO output to either 0 or 1, this patch drove the GPIO active to 0, and put the GPIO in tristate to drive it to 1, unfortunately this does not work, revert back to active driving. Using a signed variable (gstate) to hold the gpio state and using a bit- wise operation on it also resulted in toggling value from 1 to -2 since the variable is signed. This value was then passed on to gpio_direction_ output, which always perform a if (value) ... to set the value to the gpio, so we were always writing a 1 to this GPIO instead of 1 -> 0 -> 1 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@kernel.org>
2011-06-28watchdog: mtx1-wdt: request gpio before using itFlorian Fainelli
Otherwise, the gpiolib autorequest feature will produce a WARN_ON(): WARNING: at drivers/gpio/gpiolib.c:101 0x8020ec6c() autorequest GPIO-215 [...] Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@kernel.org>
2011-06-28watchdog: Handle multiple wm831x watchdogs being registeredMark Brown
Due to the whole single instance based watchdog API we use static data for the wm831x watchdog which means that if the system tries to register a second one we end up trying to register the same miscdevice again, corrupting the miscdevice list. Work around this by checking for duplicate registrations until we get a watchdog core. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28md: avoid endless recovery loop when waiting for fail device to complete.NeilBrown
If a device fails in a way that causes pending request to take a while to complete, md will not be able to immediately remove it from the array in remove_and_add_spares. It will then incorrectly look like a spare device and md will try to recover it even though it is failed. This leads to a recovery process starting and instantly aborting over and over again. We should check if the device is faulty before considering it to be a spare. This will avoid trying to start a recovery that cannot proceed. This bug was introduced in 2.6.26 so that patch is suitable for any kernel since then. Cc: stable@kernel.org Reported-by: Jim Paradis <james.paradis@stratus.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-27ipv4: Fix IPsec slowpath fragmentation problemSteffen Klassert
ip_append_data() builds packets based on the mtu from dst_mtu(rt->dst.path). On IPsec the effective mtu is lower because we need to add the protocol headers and trailers later when we do the IPsec transformations. So after the IPsec transformations the packet might be too big, which leads to a slowpath fragmentation then. This patch fixes this by building the packets based on the lower IPsec mtu from dst_mtu(&rt->dst) and adapts the exthdr handling to this. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27ipv4: Fix packet size calculation in __ip_append_dataSteffen Klassert
Git commit 59104f06 (ip: take care of last fragment in ip_append_data) added a check to see if we exceed the mtu when we add trailer_len. However, the mtu is already subtracted by the trailer length when the xfrm transfomation bundles are set up. So IPsec packets with mtu size get fragmented, or if the DF bit is set the packets will not be send even though they match the mtu perfectly fine. This patch actually reverts commit 59104f06. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27Linux 3.0-rc5v3.0-rc5Linus Torvalds
2011-06-27drm/i915: more struct_mutex lockingHugh Dickins
When auditing the locking in i915_gem.c (for a prospective change which I then abandoned), I noticed two places where struct_mutex is not held across GEM object manipulations that would usually require it. Since one is in initial setup and the other in driver unload, I'm guessing the mutex is not required for either; but post a patch in case it is. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drm/i915: use shmem_truncate_rangeHugh Dickins
The interface to ->truncate_range is changing very slightly: once "tmpfs: take control of its truncate_range" has been applied, this can be applied. For now there is only a slight inefficiency while this remains unapplied, but it will soon become essential for managing shmem's use of swap. Change i915_gem_object_truncate() to use shmem_truncate_range() directly: which should also spare i915 later change if we switch from inode_operations->truncate_range to file_operations->fallocate. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drm/i915: use shmem_read_mapping_pageHugh Dickins
Soon tmpfs will stop supporting ->readpage and read_cache_page_gfp(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. Make i915_gem_object_get_pages_gtt() use shmem_read_mapping_page_gfp() in the one place it's needed; elsewhere use shmem_read_mapping_page(), with the mapping's gfp_mask properly initialized. Forget about __GFP_COLD: since tmpfs initializes its pages with memset, asking for a cold page is counter-productive. Include linux/shmem_fs.h also in drm_gem.c: with shmem_file_setup() now declared there too, we shall remove the prototype from linux/mm.h later. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drm/ttm: use shmem_read_mapping_pageHugh Dickins
Soon tmpfs will stop supporting ->readpage and read_mapping_page(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. ttm_tt_swapin() and ttm_tt_swapout() use shmem_read_mapping_page() in place of read_mapping_page(), since their swap_space has been created with shmem_file_setup(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drivers/tty/serial/8250_pci.c: fix warningAndrew Morton
Fis the warning drivers/tty/serial/8250_pci.c:1457: warning: initialization from incompatible pointer type Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drivers/misc/ioc4.c: fix section mismatch / race conditionRalf Baechle
Fix this section mismatch: WARNING: drivers/misc/ioc4.o(.data+0x144): Section mismatch in reference from the variable ioc4_load_modules_work to the function .devinit.text:ioc4_load_modules() The variable ioc4_load_modules_work references the function __devinit ioc4_load_modules() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console This one is potentially fatal; by the time ioc4_load_modules is invoked it may already have been freed. For that reason ioc4_load_modules_work can't be turned to __devinitdata but also because it's referenced in ioc4_exit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Brent Casavant <bcasavan@sgi.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drivers/leds/leds-lp5523.c: fix section mismatchesRalf Baechle
Fix this section mismatch: WARNING: drivers/leds/leds-lp5523.o(.text+0x12f4): Section mismatch in reference from the function lp5523_probe() to the function .init.text:lp5523_init_led() The function lp5523_probe() references the function __init lp5523_init_led(). This is often because lp5523_probe lacks a __init annotation or the annotation of lp5523_init_led is wrong. Fixing this one triggers one more mismatch, fix that one as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drivers/leds/leds-lp5521.c: fix section mismatchesRalf Baechle
Fix this section mismatch: WARNING: drivers/leds/leds-lp5521.o(.text+0xf2c): Section mismatch in reference from the function lp5521_probe() to the function .init.text:lp5521_init_led() The function lp5521_probe() references the function __init lp5521_init_led(). This is often because lp5521_probe lacks a __init annotation or the annotation of lp5521_init_led is wrong. Fixing this mismatch triggers one more mismatch, fix that one as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27memcg: fix direct softlimit reclaim to be called in limit pathKAMEZAWA Hiroyuki
Commit d149e3b25d7c ("memcg: add the soft_limit reclaim in global direct reclaim") adds a softlimit hook to shrink_zones(). By this, soft limit is called as try_to_free_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() Then, direct reclaim is memcg softlimit hint aware, now. But, the memory cgroup's "limit" path can call softlimit shrinker. try_to_free_mem_cgroup_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() This will cause a global reclaim when a memcg hits limit. This is bug. soft_limit_reclaim() should be called when scanning_global_lru(sc) == true. And the commit adds a variable "total_scanned" for counting softlimit scanned pages....it's not "total". This patch removes the variable and update sc->nr_scanned instead of it. This will affect shrink_slab()'s scan condition but, global LRU is scanned by softlimit and I think this change makes sense. TODO: avoid too much scanning of a zone when softlimit did enough work. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Ying Han <yinghan@google.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27taskstats: don't allow duplicate entries in listener modeVasiliy Kulikov
Currently a single process may register exit handlers unlimited times. It may lead to a bloated listeners chain and very slow process terminations. Eg after 10KK sent TASKSTATS_CMD_ATTR_REGISTER_CPUMASKs ~300 Mb of kernel memory is stolen for the handlers chain and "time id" shows 2-7 seconds instead of normal 0.003. It makes it possible to exhaust all kernel memory and to eat much of CPU time by triggerring numerous exits on a single CPU. The patch limits the number of times a single process may register itself on a single CPU to one. One little issue is kept unfixed - as taskstats_exit() is called before exit_files() in do_exit(), the orphaned listener entry (if it was not explicitly deregistered) is kept until the next someone's exit() and implicit deregistration in send_cpu_listeners(). So, if a process registered itself as a listener exits and the next spawned process gets the same pid, it would inherit taskstats attributes. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27mm: fix assertion mapping->nrpages == 0 in end_writeback()Jan Kara
Under heavy memory and filesystem load, users observe the assertion mapping->nrpages == 0 in end_writeback() trigger. This can be caused by page reclaim reclaiming the last page from a mapping in the following race: CPU0 CPU1 ... shrink_page_list() __remove_mapping() __delete_from_page_cache() radix_tree_delete() evict_inode() truncate_inode_pages() truncate_inode_pages_range() pagevec_lookup() - finds nothing end_writeback() mapping->nrpages != 0 -> BUG page->mapping = NULL mapping->nrpages-- Fix the problem by doing a reliable check of mapping->nrpages under mapping->tree_lock in end_writeback(). Analyzed by Jay <jinshan.xiong@whamcloud.com>, lost in LKML, and dug out by Miklos Szeredi <mszeredi@suse.de>. Cc: Jay <jinshan.xiong@whamcloud.com> Cc: Miklos Szeredi <mszeredi@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27mm/memory-failure.c: fix spinlock vs mutex orderPeter Zijlstra
We cannot take a mutex while holding a spinlock, so flip the order and fix the locking documentation. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drivers/misc/lkdtm.c: fix race when crashpoint is hit multiple times before ↵Josh Hunt
checking count We observed the crash point count going negative in cases where the crash point is hit multiple times before the check of "count == 0" is done. Because of this we never call lkdtm_do_action(). This patch just adds a spinlock to protect count. Reported-by: Tapan Dhimant <tdhimant@akamai.com> Signed-off-by: Josh Hunt <johunt@akamai.com> Acked-by: Ankita Garg <ankita@in.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 08:48:23 +0000