summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-07target: support zero allocation length in REQUEST SENSEPaolo Bonzini
Similar to INQUIRY and MODE SENSE, construct the sense data in a buffer and later copy it to the scatterlist. Do not do anything, but still clear a pending unit attention condition, if the allocation length is zero. However, SPC tells us that "If a REQUEST SENSE command is terminated with CHECK CONDITION status [and] the REQUEST SENSE command was received on an I_T nexus with a pending unit attention condition (i.e., before the device server reports CHECK CONDITION status), then the device server shall not clear the pending unit attention condition." Do the transport_kmap_data_sg early to detect this case. It also tells us "Device servers shall not adjust the additional sense length to reflect truncation if the allocation length is less than the sense data available", so do not do that! Note that the err variable is write-only. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-07target: support zero-size allocation lengths in transport_kmap_data_sgPaolo Bonzini
In order to support zero-size allocation lengths, do not assert that we have a scatterlist until after checking cmd->data_length. But once we do this, we can have two cases of transport_kmap_data_sg returning NULL: a zero-size allocation length, or an out-of-memory condition. Report the latter using sense codes, so that the SCSI command that triggered it will fail. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-07target: fail REPORT LUNS with less than 16 bytes of payloadPaolo Bonzini
SPC says: "The ALLOCATION LENGTH field is defined in 4.3.5.6. The allocation length should be at least 16. Device servers compliant with SPC return CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB when the allocation length is less than 16 bytes". Testcase: sg_raw -r8 /dev/sdb a0 00 00 00 00 00 00 00 00 08 00 00 should fail with ILLEGAL REQUEST / INVALID FIELD IN CDB sense does not fail without the patch fails correctly with the patch Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-07target: report too-small parameter lists everywherePaolo Bonzini
Several places were not checking that the parameter list length was large enough, and thus accessing invalid memory. Zero-length parameter lists are just a special case of this. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-07target: go through normal processing for zero-length PSCSI commandsPaolo Bonzini
Right now, commands with a zero-size payload are skipped completely. This is wrong; such commands should be passed down to the device and processed normally. For physical backends, this ignores completely things such as START STOP UNIT. For virtual backends, we have a hack in place to clear a unit attention state on a zero-size REQUEST SENSE, but we still do not report errors properly on zero-length commands---out-of-bounds 0-block reads and writes, too small parameter list lengths, etc. This patch fixes this for PSCSI. Uses of transport_kmap_data_sg are guarded with a check for non-zero cmd->data_length; for all other commands a zero length is handled properly in pscsi_execute_cmd. The sole exception will be for now REPORT LUNS, which is handled through the normal SPC emulation. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-07|PATCH] seeq: Add missing spinlock initJean Delvare
It doesn't seem this spinlock was properly initialized. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07udp: increment UDP_MIB_INERRORS if copy failedEric Dumazet
In UDP recvmsg(), we miss an increase of UDP_MIB_INERRORS if the copy of skb to userspace failed for whatever reason. Reported-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Return the error value in case of command initialization failureEugenia Emantayev
If mlx4_cmd_init() failed, the init_one function returned success, although no resources were opened. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Fixing error flow in case of QUERY_FW failureAviad Yehezkel
The order of operations was wrong on the teardown flow. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Looking for promiscuous entries on the correct portAviad Yehezkel
The search for promisc entries was always done on the first port, While the addition is done on the correct port. This lead to resource leackage of promisc entries on the second port and brought to a state where we could no longer enter to promiscuous mode after enough iterations of "ifconfig promisc" on the second port. Fix that by using the correct port when searching. Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Add security check / enforcement for flow steering rules set ↵Hadar Hen Zion
for VMs Since VFs may be mapped to VMs which aren't trusted entities, flow steering rules attached through the wrapper on behalf of VFs must be checked to make sure that their L2 specification relate to MAC address assigned to that VF, and add L2 specification if its missing. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Put Firmware flow steering structures in common header filesHadar Hen Zion
To allow for usage of the flow steering Firmware structures in more locations over the driver, such as the resource tracker, move them from mcg.c to common header files. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07SUNRPC: Fix a UDP transport regressionTrond Myklebust
Commit 43cedbf0e8dfb9c5610eb7985d5f21263e313802 (SUNRPC: Ensure that we grab the XPRT_LOCK before calling xprt_alloc_slot) is causing hangs in the case of NFS over UDP mounts. Since neither the UDP or the RDMA transport mechanism use dynamic slot allocation, we can skip grabbing the socket lock for those transports. Add a new rpc_xprt_op to allow switching between the TCP and UDP/RDMA case. Note that the NFSv4.1 back channel assigns the slot directly through rpc_run_bc_task, so we can ignore that case. Reported-by: Dick Streefland <dick.streefland@altium.nl> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org [>= 3.1]
2012-09-07Merge tag 'fixes-for-v3.6-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into work-linus usb: fixes for v3.6-rc4 Here's a rather big set of fixes for v3.6-rc4. There are some fixes for bugs which have been pending for a long time and only now were uncovered, like the musb and dwc3 patches. We have some remaining fixes for the ep->desc patch series from Ido, a fix for renesas DMA usage, IRQ check on musb's DMA and an oops fix on musb Host implementation. All patches have been pending on linux-usb for a long time and shouldn't cause any further regressions.
2012-09-07tools lib traceevent: Get rid of die() from pevent_register_print_functionNamhyung Kim
If memory allocation for handler fails or argument type is not match, return gracefully instead of calling die(). Also add an new error code for the later case. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1346986187-5170-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-07tools lib traceevent: Get rid of die() from pevent_register_event_handlerNamhyung Kim
If memory allocation for handler fails, return gracefully instead of calling die(). Note that casts to void * are needed because gcc complained about discarding 'const' qualifier during implicit argument cast. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1346986187-5170-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-07tools lib traceevent: Get rid of die() from pretty_print()Namhyung Kim
There are three cases that call die() in the pretty_print. 1. insufficient number of argument: cannot proceed anymore. 2. too long format conversion specifier: truncate and proceed. 3. bad size specifier in format string: skip and proceed. For all cases, convert die to do_warning, mark the event as EVENT_FL_FAILED and print error message at the last. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1346986187-5170-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-07HID: tpkbd: work even if the new Lenovo Keyboard driver is not configuredAndres Freund
c1dcad2d32d0252e8a3023d20311b52a187ecda3 added a new driver configured by HID_LENOVO_TPKBD but made the hid_have_special_driver entry non-optional which lead to a recognized but non-working device if the new driver wasn't configured (which is the correct default). Signed-off-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-07perf tools: Ignore compiled python binariesNamhyung Kim
It prevents mindless git add from adding those files. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346982953-30824-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-07HID: primax: Remove px_probe() and px_remove() functionsAxel Lin
The px_probe() and px_remove() functions do not have any special initialization and cleanup. Remove them and let HID core handle the default probe/remove actions. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-07HID: waltop: Remove waltop_probe() and waltop_remove() functionsAxel Lin
The waltop_probe() and waltop_remove() functions do not have any special initialization and cleanup. Remove them and let HID core handle the default probe/remove actions. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-07blackfin: smp: adapt to generic smp helpersSteven Miao
Replace blackfin ipi message queue with generic smp helper function. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-09-07x86/mm: Fix range check in tlbflush debugfs interfaceJan Beulich
Since the shift count settable there is used for shifting values of type "unsigned long", its value must not match or exceed BITS_PER_LONG (otherwise the shift operations are undefined). Similarly, the value must not be negative (but -1 must be permitted, as that's the value used to distinguish the case of the fine grained flushing being disabled). Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Alex Shi <alex.shi@intel.com> Link: http://lkml.kernel.org/r/5049B65C020000780009990C@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-07Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Rename libtraceevent 'private' struct member to 'priv' so that it works in C++, from Steven Rostedt - Remove lots of exit()/die() calls from tools so that the main perf exit routine can take place, from David Ahern - Fix x86 build on x86-64, from David Ahern. - Remove some headers that prevented perf from building on Android, from David Ahern - {int,str,rb}list fixes from Suzuki K Poulose - perf.data header fixes from Namhyung Kim - Replace needless mempcpy with memcpy, to allow build on Android, from Irina Tirdea - Allow user to indicate objdump path, needed in cross environments, from Maciek Borzecki - Fix hardware cache event name generation, fix from Jiri Olsa - Add round trip test for sw, hw and cache event names, catching the problem Jiri fixed, after Jiri's patch, the test passes successfully. - Clean target should do clean for lib/traceevent too, fix from David Ahern - Check the right variable for allocation failure, fix from Namhyung Kim - Set up evsel->tp_format regardless of evsel->name being set already, fix from Namhyung Kim Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-07drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at bootDave Airlie
This will cause udev to load vmwgfx instead of waiting for X to do it. Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-07drm/vmwgfx: allow a kconfig option to choose if fbcon is enabledDave Airlie
This makes things easier for distros where we'd like to have fbcon enabled all the time. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-07ASoC: tegra: fix maxburst settings in dmaengine codeStephen Warren
The I2S controllers are programmed with an "attention" level of 4 DWORDs. This must match the configuration passed to the DMA driver, so that when they burst in data, they don't overflow the available FIFO space. Also, the burst size is relevant to the destination for playback, and source for capture, not vice-versa as originally written. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-09-07regulator: core: Report microvolts in sysfs even with only list_voltage()Mark Brown
If a regulator only supports a single voltage list_voltage() can be used to report what that voltage is so add this as one of the criteria for creating the microvolts file in sysfs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06Merge tag 'stable/for-linus-3.6-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: * Fix for TLB flushing introduced in v3.6 * Fix Xen-SWIOTLB not using proper DMA mask - device had 64bit but in a 32-bit kernel we need to allocate for coherent pages from a 32-bit pool. * When trying to re-use P2M nodes we had a one-off error and triggered a BUG_ON check with specific CONFIG_ option. * When doing FLR in Xen-PCI-backend we would first do FLR then save the PCI configuration space. We needed to do it the other way around. * tag 'stable/for-linus-3.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pciback: Fix proper FLR steps. xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory.
2012-09-06Merge tag '3.6-pci-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Power management - PCI/PM: Enable D3/D3cold by default for most devices - PCI/PM: Keep parent bridge active when probing device - PCI/PM: Fix config reg access for D3cold and bridge suspending - PCI/PM: Add ABI document for sysfs file d3cold_allowed Core - PCI: Don't print anything while decoding is disabled" * tag '3.6-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Don't print anything while decoding is disabled PCI/PM: Add ABI document for sysfs file d3cold_allowed PCI/PM: Fix config reg access for D3cold and bridge suspending PCI/PM: Keep parent bridge active when probing device PCI/PM: Enable D3/D3cold by default for most devices
2012-09-07crypto/caam: Export gen_split_key symbol for other modulesBen Collins
In 3.6-rc3, without this patch, the following error occurs with a modular build: ERROR: "gen_split_key" [drivers/crypto/caam/caamhash.ko] undefined! ERROR: "gen_split_key" [drivers/crypto/caam/caamalg.ko] undefined! Signed-off-by: Ben Collins <ben.c@servergy.com> Cc: Yuan Kang <Yuan.Kang@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-06NFS: return error from decode_getfh in decode openWeston Andros Adamson
If decode_getfh failed, nfs4_xdr_dec_open would return 0 since the last decode_* call must have succeeded. Cc: stable@vger.kernel.org Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-06perf tools: Fix cache event name generationJiri Olsa
If the event name is specified with all 3 components, the last one overwrites the previous one during the name composing within the parse_events_add_cache function. Fixing this by properly adjusting the string index. Reported-by: Joel Uckelman <joel@lightboxtechnologies.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joel Uckelman <joel@lightboxtechnologies.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LPU-Reference: 20120905175133.GA18352@krava.brq.redhat.com [ committer note: Remove the newline fix, done already in 42e1fb7 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-06perf test: Add roundtrip test for hardware cache eventsArnaldo Carvalho de Melo
That nicely catches the problem reported by Joel Uckelman in http://permalink.gmane.org/gmane.linux.kernel.perf.user/1016 : [root@sandy ~]# perf test 1: vmlinux symtab matches kallsyms: Ok 2: detect open syscall event: Ok 3: detect open syscall event on all cpus: Ok 4: read samples using the mmap interface: Ok 5: parse events tests: Ok 6: x86 rdpmc test: Ok 7: Validate PERF_RECORD_* events & perf_sample fields: Ok 8: Test perf pmu format parsing: Ok 9: Test dso data interface: Ok 10: roundtrip evsel->name check: FAILED! [root@sandy ~]# perf test -v 10 10: roundtrip evsel->name check: --- start --- L1-dcache-misses != L1-dcache-load-misses L1-dcache-misses != L1-dcache-store-misses L1-dcache-misses != L1-dcache-prefetch-misses L1-icache-misses != L1-icache-load-misses L1-icache-misses != L1-icache-prefetch-misses LLC-misses != LLC-load-misses LLC-misses != LLC-store-misses LLC-misses != LLC-prefetch-misses dTLB-misses != dTLB-load-misses dTLB-misses != dTLB-store-misses dTLB-misses != dTLB-prefetch-misses iTLB-misses != iTLB-load-misses branch-misses != branch-load-misses node-misses != node-load-misses node-misses != node-store-misses node-misses != node-prefetch-misses ---- end ---- roundtrip evsel->name check: FAILED! [root@sandy ~]# Now lemme apply Jiri's fix and try it again... Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Joel Uckelman <joel@lightboxtechnologies.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bbewtxw0rfipp5qy1j3jtg5d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-06perf evlist: Add fprintf methodArnaldo Carvalho de Melo
For debugging, etc. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-fjimge1ovgh976qlt8dtmlp0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-06perf tools: Remove extraneous newline when parsing hardware cache eventsArnaldo Carvalho de Melo
Noticed while developing a 'perf test' entry to verify that perf_evsel__name works. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-xz6zgh38mp3cjnd2udh38z8f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-06CIFS: Fix endianness conversionPavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-06CIFS: Fix error handling in cifs_push_mandatory_locksPavel Shilovsky
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-06Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC bug fixes from Olof Johansson: "Mostly Renesas and Atmel bugfixes this time, targeting boot and build problems. A couple of patches for gemini and kirkwood as well. On a whole nothing very controversial." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: gemini: fix the gemini build ARM: shmobile: armadillo800eva: enable rw rootfs mount ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c ARM: shmobile: mackerel: fixup usb module order ARM: shmobile: armadillo800eva: fixup: sound card detection order ARM: shmobile: marzen: fixup smsc911x id for regulator ARM: at91/feature-removal-schedule: delay at91_mci removal ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts ARM: at91/clock: fix PLLA overclock warning ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support ARM: at91: fix system timer irq issue due to sparse irq support ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc
2012-09-06kobject: fix oops with "input0: bad kobj_uevent_env content in show_uevent()"Bjørn Mork
Fengguang Wu <fengguang.wu@intel.com> writes: > After the __devinit* removal series, I can still get kernel panic in > show_uevent(). So there are more sources of bug.. > > Debug patch: > > @@ -343,8 +343,11 @@ static ssize_t show_uevent(struct device > goto out; > > /* copy keys to file */ > - for (i = 0; i < env->envp_idx; i++) > + dev_err(dev, "uevent %d env[%d]: %s/.../%s\n", env->buflen, env->envp_idx, top_kobj->name, dev->kobj.name); > + for (i = 0; i < env->envp_idx; i++) { > + printk(KERN_ERR "uevent %d env[%d]: %s\n", (int)count, i, env->envp[i]); > count += sprintf(&buf[count], "%s\n", env->envp[i]); > + } > > Oops message, the env[] is again not properly initilized: > > [ 44.068623] input input0: uevent 61 env[805306368]: input0/.../input0 > [ 44.069552] uevent 0 env[0]: (null) This is a completely different CONFIG_HOTPLUG problem, only demonstrating another reason why CONFIG_HOTPLUG should go away. I had a hard time trying to disable it anyway ;-) The problem this time is lots of code assuming that a call to add_uevent_var() will guarantee that env->buflen > 0. This is not true if CONFIG_HOTPLUG is unset. So things like this end up overwriting env->envp_idx because the array index is -1: if (add_uevent_var(env, "MODALIAS=")) return -ENOMEM; len = input_print_modalias(&env->buf[env->buflen - 1], sizeof(env->buf) - env->buflen, dev, 0); Don't know what the best action is, given that there seem to be a *lot* of this around the kernel. This patch "fixes" the problem for me, but I don't know if it can be considered an appropriate fix. [ It is the correct fix for now, for 3.7 forcing CONFIG_HOTPLUG to always be on is the longterm fix, but it's too late for 3.6 and older kernels to resolve this that way - gregkh ] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06usb: dwc3: gadget: fix pending isoc handlingPratyush Anand
If xfernotready is received and there is no request in request_list then REQUEST_PENDING flag must be set, so that next request in ep queue is executed. In case of isoc transfer, if xfernotready is already elapsed and even first request has not been queued to request_list, then issue END TRANSFER, so that you can receive xfernotready again and can have notion of current microframe. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: renesas_usbhs: fixup DMA transport data alignmentKuninori Morimoto
renesas_usbhs dma can transport 8byte alignment data, not 4byte. This patch fixup it. Reported-by: Sugnan Prabhu S <sugnan.prabhu@renesasmobile.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: at91udc: Don't check for ep->ep.descSebastian Andrzej Siewior
Earlier we used to check for ep->ep.desc to figure out if this ep has already been enabled and if so, abort. Ido Shayevitz removed the usb_endpoint_descriptor from private udc structure 5a6506f00 ("usb: gadget: Update at91_udc to use usb_endpoint_descriptor inside the struct usb_ep") but did not fix up the ep_enable condition because _now_ the member is always true and we can't check if this ep is enabled twice. Cc: Ido Shayevitz <idos@codeaurora.org> Tested-by: Fabio Porcedda <fabio.porcedda@gmail.com> Tested-by: Mario Isidoro <Mario.Isidoro@tecmic.pt> Cc: <stable@kernel.org> # v3.5 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: at91udc: don't overwrite driver dataSebastian Andrzej Siewior
The driver was converted to the new start/stop interface in f3d8bf34c2 ("usb: gadget: at91_udc: convert to new style start/stop interface"). I overlooked that the driver is overwritting the private data which is used by the composite framework. The udc driver doesn't read it, it is only written here. Tested-by: Fabio Porcedda <fabio.porcedda@gmail.com> Tested-by: Mario Isidoro <Mario.Isidoro@tecmic.pt> Cc: <stable@kernel.org> # v3.5 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: dwc3: core: fix incorrect usage of resource pointerKishon Vijay Abraham I
Populate the resources for xhci afresh instead of directly using the *struct resource* of core. *resource* structure has parent, sibling, child pointers which should be filled only by resource API's. By directly using the *resource* pointer of core in xhci, these parent, sibling, child pointers are already populated even before *platform_device_add* causing side effects. Cc: stable@vger.kernel.org # v3.4, v3.5 Reported-by: Ruchika Kharwar <ruchika@ti.com> Tested-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: musb: musbhsdma: fix IRQ checkSergei Shtylyov
dma_controller_create() in this MUSB DMA driver only regards 0 as a wrong IRQ number, despite platform_get_irq_byname() that it calls returns -ENXIO in that case. It leads to calling request_irq() with a negative IRQ number, and when it naturally fails, the following is printed to the console: request_irq -6 failed! and the DMA controller is not created. Fix this function to filter out the error values as well as 0. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: musb: tusb6010: fix error path in tusb_probe()Sergei Shtylyov
On platform_device_add() failure, the TUSB6010 glue layer forgets to call platform_device_put() -- probably due to a typo... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: musb: host: fix for musb_start_urb Oopsyuzheng ma
when using musb_urb_enqueue to submit three urbs to the same endpoint, when hep->hcpriv is NULL, qh will be allocated when the first urb is completed. When the IRQ completes the next two urbs, qh->hep->hcpriv will be set to NULL. Now the second urb get musb->lock and executes musb_schedule(), but next_urb(qh) is NULL, so musb_start_urb will Oops. [ balbi@ti.com : practically rewrote commit log so it makes sense ] Signed-off-by: mayuzheng <myz147@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: dummy_hcd: add support for USB_DT_BOS on rhSebastian Andrzej Siewior
Without a reply for USB_DT_BOS the USB3 mode does not work since 448b6eb1 ("USB: Make sure to fetch the BOS desc for roothubs.). Cc: stable@vger.kernel.org #v3.5 Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: dummy_hcd: fixup error probe pathSebastian Andrzej Siewior
If USB2 host controller probes fine but USB3 does not then we don't remove the USB controller properly and lock up the system while the HUB code will try to enumerate the USB2 controller and access memory which is no longer available in case the dummy_hcd was compiled as a module. This is a problem since 448b6eb1 ("USB: Make sure to fetch the BOS desc for roothubs.) if used in USB3 mode because dummy does not provide this descriptor and explodes later. Cc: stable@vger.kernel.org # v3.5 Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit (git 2.34.1) at 2025-09-15 01:26:58 +0000