| Age | Commit message (Collapse) | Author |
|---|
|
As per memory map table, the region for PCIe6a is 64MByte. Hence, set the
size of 32 bit non-prefetchable memory region beginning on address
0x70300000 as 0x3d00000 so that BAR space assigned to BAR registers can be
allocated from 0x70300000 to 0x74000000.
Fixes: 7af141850012 ("arm64: dts: qcom: x1e80100: Fix up BAR spaces")
Cc: stable@vger.kernel.org
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241113080508.3458849-1-quic_qianyu@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This reverts commit 1a48dd7b9ac809d1bd0fd2fef509abba83433846.
A recent change enabling OTG mode on the Lenovo ThinkPad T14s USB-C
ports can break SuperSpeed device hotplugging. The host controller is
enumerated, but the device is not:
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.5.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x000080a000000810
xhci-hcd xhci-hcd.5.auto: irq 247, io mem 0x0a800000
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.5.auto: Host supports USB 3.1 Enhanced SuperSpeed
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Once this happens on either of the two ports, no amount of disconnecting
and reconnecting makes the SuperSpeed device be enumerated, while
FullSpeed device enumeration still works.
With retimer (and orientation detection) support not even merged yet,
let's revert at least until we have stable host mode in mainline.
Fixes: 1a48dd7b9ac8 ("arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports")
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241206172402.20724-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The macros giving the direction of the crossing thresholds use the BIT
macro which is not exported to the userspace. Consequently when an
userspace program includes the header, it fails to compile.
Replace the macros by their litteral to allow the compilation of
userspace program using this header.
Fixes: 445936f9e258 ("thermal: core: Add user thresholds support")
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20241212201311.4143196-1-daniel.lezcano@linaro.org
[ rjw: Add Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Three small fixes for the soc tree:
- devicetee fix for the Arm Juno reference machine, to allow more
interesting PCI configurations
- build fix for SCMI firmware on the NXP i.MX platform
- fix for a race condition in Arm FF-A firmware"
* tag 'soc-fixes-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: fvp: Update PCIe bus-range property
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
firmware: arm_scmi: Fix i.MX build dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi:
- Add support for Alienware m16 R1 AMD
- Do not setup legacy LED control with X and G Series
- intel/ifs: Clearwater Forest support
- intel/vsec: Panther Lake support
- p2sb: Do not hide the device if BIOS left it unhidden
- touchscreen_dmi: Add SARY Tab 3 tablet information
* tag 'platform-drivers-x86-v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/vsec: Add support for Panther Lake
platform/x86/intel/ifs: Add Clearwater Forest to CPU support list
platform/x86: touchscreen_dmi: Add info for SARY Tab 3 tablet
p2sb: Do not scan and remove the P2SB device when it is unhidden
p2sb: Move P2SB hide and unhide code to p2sb_scan_and_cache()
p2sb: Introduce the global flag p2sb_hidden_by_bios
p2sb: Factor out p2sb_read_from_cache()
alienware-wmi: Adds support to Alienware m16 R1 AMD
alienware-wmi: Fix X Series and G Series quirks
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
The DMI match information for these models has changed so the match
entries need updates.
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.13-rc3
Here are some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.13-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FE910C04 rmnet compositions
USB: serial: option: add MediaTek T7XX compositions
USB: serial: option: add Netprisma LCUK54 modules for WWAN Ready
USB: serial: option: add MeiG Smart SLM770A
USB: serial: option: add TCL IK512 MBIM & ECM
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus
Manivannan writes:
MHI Host
========
- Fix the MHI BAR mapping by passing BAR number to pcim_iomap_region() API
instead of BAR mask. This fixes a regression for Qualcomm MHI modems.
* tag 'mhi-fixes-for-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: fix MHI BAR mapping
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for 6.13 cycle.
The usual mixed back of fixes for ancient and recent bugs
A number of these were from an audit by Javier Carrasco of places
we may leak stack data via holes in structures passed to userspace that
were not explicitly zeroed. Very helpful effort after we found a similar
bug in review of new code.
This affected:
- dummy driver
- kionix,kmx61
- murrata,zpa2326
- rockchip,saradc
- rohm,bh1745
- veml,vcnl4035
- ti,ads1119
- ti,ads8688
- ti,tmp0006
Other fixes:
core,inkern
- Underflow fo reference count issue in error path of iio_channel_get_all()
for devices we haven't yet gotten.
tests
- Kconfig typo fix so it's possible to tell what test is being enabled.
- Check for allocation failures.
adi,ad4695
- Ensure timing requirement wrt to final clock edge vs next conversion
signal are met by adding an additional SPI transfer.
adi,ad7124
- Ensure channels are disabled at probe to avoid wrong data if channel 0
is not the first one read.
adi,ad7173
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9467
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9832
- Off by one error on input verification for phase control
adi,ad9834
- Off by one error on input verification for phase control.
atmel,at91
- In an error path don't use a variable that hasn't been initialized yet.
invensense,icm42600
- SPI burst write does not work for some icm426000 chips, disable it.
- Ensure correct handling of timestamps after resume.
st,sensors
- Add back accidentally dropped IIS2MDC compatible in binding doc.
st,stm32-dfsdm:
- label property was accidentally made a required property. Make it optional
again to fix use of older DT.
ti,ads1119
- Use a fixed size for the channel data rather than an integer, bringing
the code inline with the advertised 16 bit channel size and avoiding
userspace misinterpreting the data.
ti,ads124s08
- Use _cansleep gpio calls as no reason to prevent sleeping and it
was stopping a new board design working (trivial fix).
ti,ads1298
- Add a check on failure of devm_kasprintf()
* tag 'iio-fixes-for-6.13a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer
iio: adc: ti-ads1298: Add NULL check in ads1298_init
iio: adc: stm32-dfsdm: handle label as an optional property
iio: adc: ad4695: fix buffered read, single sample timings
...
|
|
Both the ALC5645 and ALC5650 datasheets specify a recommended voltage of
1.8V for CPVDD, not 3.5V.
Fix the comment.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Fixes: 26aa19174f0d ("ASoC: dt-bindings: rt5645: add suppliers")
Fixes: 83d43ab0a1cb ("ASoC: dt-bindings: realtek,rt5645: Convert to dtschema")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241211035403.4157760-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the DMI match for a Lenovo laptop to the new DMI identifier.
This laptop ships with a different DMI identifier to what was expected,
and now has two identifiers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: ea657f6b24e1 ("ASoC: Intel: sof_sdw: Add quirk for cs42l43 system using host DMICs")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241216140821.153670-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the DMI match for a Lenovo laptop to the new DMI identifier.
This laptop ships with a different DMI identifier to what was expected,
and now has two identifiers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 83c062ae81e8 ("ASoC: Intel: sof_sdw: Add quirks for some new Lenovo laptops")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241216140821.153670-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver currently populates subsystem_device id in the
"hw_ver" field of ib_attr structure in query_device.
Updated to populate PCI revision ID.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Preethi G <preethi.gurusiddalingeswaraswamy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Current driver implementation doesn't populate the port_num
field in query_qp. Adding the code to convert internal firmware
port id to ibv defined port number and export it.
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-5-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Firmware expects "min_rnr_timer" as a mandatory attribute in
MODIFY_QP command during the RTR-RTS transition. This needs
to be enforced by the driver which is missing while setting
bnxt_set_mandatory_attributes that sends these flags as part
of modify_qp optimization.
Fixes: 82c32d219272 ("RDMA/bnxt_re: Add support for optimized modify QP")
Reviewed-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-4-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When RDMA app configures path MTU, add a check in modify_qp verb
to make sure that it doesn't go beyond interface MTU. If this
check fails, driver will fail the modify_qp verb.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The check for 9060 condition should only be made for legacy chips.
Fixes: 9152e0b722b2 ("RDMA/bnxt_re: HW workarounds for handling specific conditions")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
For many use cases (e.g. container images are just fetched from remote),
performance will be impacted if underlay page cache is up-to-date but
direct i/o flushes dirty pages first.
Instead, let's use buffered I/O by default to keep in sync with loop
devices and add a (re)mount option to explicitly give a try to use
direct I/O if supported by the underlying files.
The container startup time is improved as below:
[workload] docker.io/library/workpress:latest
unpack 1st run non-1st runs
EROFS snapshotter buffered I/O file 4.586404265s 0.308s 0.198s
EROFS snapshotter direct I/O file 4.581742849s 2.238s 0.222s
EROFS snapshotter loop 4.596023152s 0.346s 0.201s
Overlayfs snapshotter 5.382851037s 0.206s 0.214s
Fixes: fb176750266a ("erofs: add file-backed mount support")
Cc: Derek McGowan <derek@mcg.dev>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241212134336.2059899-1-hsiangkao@linux.alibaba.com
|
|
Record `m_sb` and `m_dif` to replace `m_fscache`, `m_daxdev`, `m_fp`
and `m_dax_part_off` in order to simplify the codebase.
Note that `m_bdev` is still left since it can be assigned from
`sb->s_bdev` directly.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241212235401.2857246-1-hsiangkao@linux.alibaba.com
|
|
Instead of just listing each one directly in `struct erofs_sb_info`
except that we still use `sb->s_bdev` for the primary block device.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241216125310.930933-2-hsiangkao@linux.alibaba.com
|
|
Add condition check to register ACP PDM sound card by reading
_WOV acpi entry.
Fixes: 0386d765f27a ("ASoC: amd: ps: refactor acp device configuration read logic")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241213061147.1060451-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it.
Fixes: d2a463b29741 ("PCI/MSI: Reject multi-MSI early")
Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed2a8ow5.ffs@tglx
|
|
When USB-C monitor is connected directly to Intel Barlow Ridge host, it
goes into "redrive" mode that basically routes the DisplayPort signals
directly from the GPU to the USB-C monitor without any tunneling needed.
However, the host router must be powered on for this to work. Aaron
reported that there are a couple of cases where this will not work with
the current code:
- Booting with USB-C monitor plugged in.
- Plugging in USB-C monitor when the host router is in sleep state
(runtime suspended).
- Plugging in USB-C device while the system is in system sleep state.
In all these cases once the host router is runtime suspended the picture
on the connected USB-C display disappears too. This is certainly not
what the user expected.
For this reason improve the redrive mode handling to keep the host
router from runtime suspending when detect that any of the above cases
is happening.
Fixes: a75e0684efe5 ("thunderbolt: Keep the domain powered when USB4 port is in redrive mode")
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Closes: https://lore.kernel.org/linux-usb/20241009220118.70bfedd0@kf-ir16/
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
If client send parallel smb2 negotiate request on same connection,
ksmbd_conn can be racy. smb2 negotiate handling that are not
performance-related can be serialized with conn lock.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since commit 0a77d947f599 ("ksmbd: check outstanding simultaneous SMB
operations"), ksmbd enforces a maximum number of simultaneous operations
for a connection. The problem is that reaching the limit causes ksmbd to
close the socket, and the client has no indication that it should have
slowed down.
This behaviour can be reproduced by setting "smb2 max credits = 128" (or
lower), and transferring a large file (25GB).
smbclient fails as below:
$ smbclient //192.168.1.254/testshare -U user%pass
smb: \> put file.bin
cli_push returned NT_STATUS_USER_SESSION_DELETED
putting file file.bin as \file.bin smb2cli_req_compound_submit:
Insufficient credits. 0 available, 1 needed
NT_STATUS_INTERNAL_ERROR closing remote file \file.bin
smb: \> smb2cli_req_compound_submit: Insufficient credits. 0 available,
1 needed
Windows clients fail with 0x8007003b (with smaller files even).
Fix this by delaying reading from the socket until there's room to
allocate a request. This effectively applies backpressure on the client,
so the transfer completes, albeit at a slower rate.
Fixes: 0a77d947f599 ("ksmbd: check outstanding simultaneous SMB operations")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This changes the semantics of req_running to count all in-flight
requests on a given connection, rather than the number of elements
in the conn->request list. The latter is used only in smb2_cancel,
and the counter is not used
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When evaluating extended permissions, ignore unknown permissions instead
of calling BUG(). This commit ensures that future permissions can be
added without interfering with older kernels.
Cc: stable@vger.kernel.org
Fixes: fa1aa143ac4a ("selinux: extended permissions for ioctls")
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Sundry build and misc fixes
* tag 'arc-6.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: build: Try to guess GCC variant of cross compiler
ARC: bpf: Correct conditional check in 'check_jmp_32'
ARC: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
ARC: build: Use __force to suppress per-CPU cmpxchg warnings
ARC: fix reference of dependency for PAE40 config
ARC: build: disallow invalid PAE40 + 4K page config
arc: rename aux.h to arc_aux.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"i2c host fixes: PNX used the wrong unit for timeouts, Nomadik was
missing a sentinel, and RIIC was missing rounding up"
* tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: riic: Always round-up when calculating bus period
i2c: nomadik: Add missing sentinel to match table
i2c: pnx: Fix timeout in wait functions
|
|
The existing linked list based implementation of how ts tags are
assigned and managed is unsafe against concurrency and corner cases:
- element addition in tx processing can race against element removal
in ts queue completion,
- element removal in ts queue completion can race against element
removal in device close,
- if a large number of frames gets added to tx queue without ts queue
completions in between, elements with duplicate tag values can get
added.
Use a different implementation, based on per-port used tags bitmaps and
saved skb arrays.
Safety for addition in tx processing vs removal in ts completion is
provided by:
tag = find_first_zero_bit(...);
smp_mb();
<write rdev->ts_skb[tag]>
set_bit(...);
vs
<read rdev->ts_skb[tag]>
smp_mb();
clear_bit(...);
Safety for removal in ts completion vs removal in device close is
provided by using atomic read-and-clear for rdev->ts_skb[tag]:
ts_skb = xchg(&rdev->ts_skb[tag], NULL);
if (ts_skb)
<handle it>
Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The calculation determining whether to use three- or four-level paging
didn't account for KMSAN modules metadata. Include this metadata in the
virtual memory size calculation to ensure correct paging mode selection
and avoiding potentially unnecessary physical memory size limitations.
Fixes: 65ca73f9fb36 ("s390/mm: define KMSAN metadata for vmalloc and modules")
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Shannon Nelson says:
====================
ionic: minor code fixes
These are a couple of code fixes for the ionic driver.
====================
Link: https://patch.msgid.link/20241212213157.12212-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some calls into ionic_get_module_eeprom() don't use a single
full buffer size, but instead multiple calls with an offset.
Teach our driver to use the offset correctly so we can
respond appropriately to the caller.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then.
Fixes: 9e25450da700 ("ionic: add private workqueue per-device")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev()
failure. This will also call ionic_lif_unregister_phc() if it has
already been registered.
Fixes: 30b87ab4c0b3 ("ionic: remove lif list concept")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the correct attribute space for sub-message key lookup in nested
attributes when adding attributes. This fixes rt_link where the "kind"
key and "data" sub-message are nested attributes in "linkinfo".
For example:
./tools/net/ynl/cli.py \
--create \
--spec Documentation/netlink/specs/rt_link.yaml \
--do newlink \
--json '{"link": 99,
"linkinfo": { "kind": "vlan", "data": {"id": 4 } }
}'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Fixes: ab463c4342d1 ("tools/net/ynl: Add support for encoding sub-messages")
Link: https://patch.msgid.link/20241213130711.40267-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If either a zero count or a large one is provided, kernel can crash.
Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters")
Reported-by: syzbot+ea40e4294e58b0292f74@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/675c6862.050a0220.37aaf.00b1.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213172518.2415666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead.
Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Make sure amd64_edac loads successfully on certain Zen4 memory
configurations
* tag 'edac_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Simplify ECC check on unified memory controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Disable the secure programming interface of the GIC500 chip in the
RK3399 SoC to fix interrupt priority assignment and even make a dead
machine boot again when the gic-v3 driver enables pseudo NMIs
- Correct the declaration of a percpu variable to fix several sparse
warnings
* tag 'irq_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Work around insecure GIC integrations
irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Prevent incorrect dequeueing of the deadline dlserver helper task and
fix its time accounting
- Properly track the CFS runqueue runnable stats
- Check the total number of all queued tasks in a sched fair's runqueue
hierarchy before deciding to stop the tick
- Fix the scheduling of the task that got woken last (NEXT_BUDDY) by
preventing those from being delayed
* tag 'sched_urgent_for_v6.13_rc3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/dlserver: Fix dlserver time accounting
sched/dlserver: Fix dlserver double enqueue
sched/eevdf: More PELT vs DELAYED_DEQUEUE
sched/fair: Fix sched_can_stop_tick() for fair tasks
sched/fair: Fix NEXT_BUDDY
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix confusion with implicitly-shifted MDCR_EL2 masks breaking
SPE/TRBE initialization
- Align nested page table walker with the intended memory attribute
combining rules of the architecture
- Prevent userspace from constraining the advertised ASID width,
avoiding horrors of guest TLBIs not matching the intended context
in hardware
- Don't leak references on LPIs when insertion into the translation
cache fails
RISC-V:
- Replace csr_write() with csr_set() for HVIEN PMU overflow bit
x86:
- Cache CPUID.0xD XSTATE offsets+sizes during module init
On Intel's Emerald Rapids CPUID costs hundreds of cycles and there
are a lot of leaves under 0xD. Getting rid of the CPUIDs during
nested VM-Enter and VM-Exit is planned for the next release, for
now just cache them: even on Skylake that is 40% faster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Cache CPUID.0xD XSTATE offsets+sizes during module init
RISC-V: KVM: Fix csr_write -> csr_set for HVIEN PMU overflow bit
KVM: arm64: vgic-its: Add error handling in vgic_its_cache_translation
KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits to be overridden
KVM: arm64: Fix S1/S2 combination when FWB==1 and S2 has Device memory type
arm64: Fix usage of new shifted MDCR_EL2 values
|
|
Guangguan Wang says:
====================
net: several fixes for smc
v1 -> v2:
rewrite patch #2 suggested by Paolo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.
Fixes: fb4f79264c0f ("net/smc: tolerate future SMCD versions")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it.
Fixes: 5c21c4ccafe8 ("net/smc: determine accepted ISM devices")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them.
Fixes: 8c3dca341aea ("net/smc: build and send V2 CLC proposal")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them.
Fixes: e7b7a64a8493 ("smc: support variable CLC proposal messages")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When application sending data more than sndbuf_space, there have chances
application will sleep in epoll_wait, and will never be wakeup again. This
is caused by a race between smc_poll and smc_cdc_tx_handler.
application tasklet
smc_tx_sendmsg(len > sndbuf_space) |
epoll_wait for EPOLL_OUT,timeout=0 |
smc_poll |
if (!smc->conn.sndbuf_space) |
| smc_cdc_tx_handler
| atomic_add sndbuf_space
| smc_tx_sndbuf_nonfull
| if (!test_bit SOCK_NOSPACE)
| do not sk_write_space;
set_bit SOCK_NOSPACE; |
return mask=0; |
Application will sleep in epoll_wait as smc_poll returns 0. And
smc_cdc_tx_handler will not call sk_write_space because the SOCK_NOSPACE
has not be set. If there is no inflight cdc msg, sk_write_space will not be
called any more, and application will sleep in epoll_wait forever.
So check sndbuf_space again after NOSPACE flag is set to break the race.
Fixes: 8dce2786a290 ("net/smc: smc_poll improvements")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
