| Age | Commit message (Collapse) | Author |
|---|
|
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The bridge eventually inherits MAC address from its first member, after the
enslavement is acked. A number of (mainly VXLAN) selftests already work
around the problem by setting the MAC address to whatever it will
eventually be anyway. Do the same for several mirror_gre selftests.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
These two selftests however check mirroring traffic to a gretap netdevice.
The bridge here does not participate in routing traffic and the IP address
or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in these selftests, thus exempting them from mlxsw router
attention. Since the bridges are only used for L2 forwarding, this change
should not hinder usefulness of this selftest for testing SW datapath or HW
datapaths in other devices.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks whether skbedit changes packet priority
as appropriate. The bridge thus does not need to participate in routing
traffic and the IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Since the bridge is only used for L2 forwarding, this change should not
hinder usefulness of this selftest for testing SW datapath or HW datapaths
in other devices.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks operation of pedit on IPv4 and IPv6
dsfield and its parts. The bridge thus does not need to participate in
routing traffic and the IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Since the bridge is only used for L2 forwarding, this change should not
hinder usefulness of this selftest for testing SW datapath or HW datapaths
in other devices.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
This will cause this selftest to fail spuriously. The swp enslavement to
the 802.1ad bridge is not allowed, because RIFs are not allowed to be
created for 802.1ad bridges, but the address indicates one needs to be
created.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
This will cause this selftest to fail spuriously. The swp enslavement to
the 802.1ad bridge is not allowed, because RIFs are not allowed to be
created for 802.1ad bridges, but the address indicates one needs to be
created.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-21
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 181 insertions(+), 15 deletions(-).
The main changes are:
1) Fix a verifier id tracking issue with scalars upon spill,
from Maxim Mikityanskiy.
2) Fix NULL dereference if an exception is generated while a BPF
subprogram is running, from Krister Johansen.
3) Fix a BTF verification failure when compiling kernel with LLVM_IAS=0,
from Florent Revest.
4) Fix expected_attach_type enforcement for kprobe_multi link,
from Jiri Olsa.
5) Fix a bpf_jit_dump issue for x86_64 to pick the correct JITed image,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
selftests/bpf: add a test for subprogram extables
bpf: ensure main program has an extable
bpf: Fix a bpf_jit_dump issue for x86_64 with sysctl bpf_jit_enable.
selftests/bpf: Add test cases to assert proper ID tracking on spill
bpf: Fix verifier id tracking of scalars on spill
====================
Link: https://lore.kernel.org/r/20230621101116.16122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hello,
This patch is to expose misc.current on cgroup v2 root for tracking
how much of the resource has been consumed in total on the system.
Most of the cloud infrastucture use cgroup to fetch the host
information for scheduling purpose.
Currently, the misc controller can be used by Intel TDX HKIDs and
AMD SEV ASIDs, which are both used for creating encrypted VMs.
Intel TDX and AMD SEV are mostly be used by the cloud providers
for providing confidential VMs.
In actual use of a server, these confidential VMs may be launched
in different ways. For the cloud solution, there are kubvirt and
coco (tracked by kubepods.slice); on host, they can be booted
directly through qemu by end user (tracked by user.slice), etc.
In this complex environment, when wanting to know how many resource
is used in total it has to iterate through all existing slices to
get the value of each misc.current and add them up to calculate
the total number of consumed keys.
So exposing misc.current to root cgroup tends to give much easier
when calculates how much resource has been used in total, which
helps to schedule and count resources for the cloud infrastucture.
Signed-off-by: LeiZhou-97 <lei.zhou@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Address the following -Wstringop-overflow warnings seen when
built with ARM architecture and aspeed_g4_defconfig configuration
(notice that under this configuration CGROUP_SUBSYS_COUNT == 0):
kernel/cgroup/cgroup.c:1208:16: warning: 'find_existing_css_set' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:1258:15: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:6089:18: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:6153:18: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
These changes are based on commit d20d30ebb199 ("cgroup: Avoid compiler
warnings with no subsystems").
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.5
* pruss: Add helper functions for ethernet client driver usage, add compile-testing, fixup function pointer casts
* smartreflex: Cosmetic optimization for using devm_ioremap_resource
* wkup_m3_ipc: Fix error checking around debugfs_create_dir
* tag 'ti-driver-soc-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
wkup_m3_ipc.c: Fix error checking for debugfs_create_dir
soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
soc: ti: pruss: Add pruss_{request,release}_mem_region() API
soc: ti: pruss: Add pruss_get()/put() API
soc: ti: pruss: Allow compile-testing
soc: ti: pruss: Avoid cast to incompatible function type
soc: ti: smartreflex: Use devm_platform_ioremap_resource()
Link: https://lore.kernel.org/r/20230615164134.6sd5hudyadq3fvk4@garage
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix typo (period vs comma) in list of valid clock names.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230620200917.24958-1-mans@mansr.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.5
The detection of split/non-split firmware files in the MDT loader is
corrected. The Geni driver is updated to not enable unused interrupts,
in some configurations. The count unit for MSM8998 in BWMON is corrected.
RPM master stats driver is corrected to check for the right return value
of devm_ioremap().
Support for socinfo version 18 and 19 are aded, and IPQ5300 is added to
the list of platforms.
* tag 'qcom-drivers-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
Link: https://lore.kernel.org/r/20230615163104.1461905-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers
PMIC wrapper
- support companion device
- add support for MT6795
SPMI:
- add support for MT8186
SVS:
- change gpu node name to match binding
* tag 'v6.4-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: remove DDP_DOMPONENT_DITHER from enum
soc: mediatek: SVS: Fix MT8192 GPU node name
soc: mediatek: mtk-mutex: Remove unnecessary .owner
dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10
dt-bindings: pwm: Add compatible for MediaTek MT6795
dt-bindings: spmi: spmi-mtk-pmif: Document mediatek,mt8195-spmi as fallback of mediatek,mt8186-spmi
soc: mediatek: pwrap: Add support for MT6795 Helio X10
soc: mediatek: mtk-pmic-wrap: Add support for MT6331 w/ MT6332 companion
soc: mediatek: mtk-pmic-wrap: Add support for companion PMICs
soc: mediatek: pwrap: Add kerneldoc for struct pwrap_slv_type
soc: mediatek: pwrap: Move PMIC read test sequence in function
dt-bindings: soc: mediatek: pwrap: Add compatible for MT6795 Helio X10
Link: https://lore.kernel.org/r/1ed1e5ae-6305-e63a-84a0-3c43f69c8f8b@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.5
Konrad Dybcio is promoted, from reviewer, to co-maintainer.
The mdt_loader gets a fix to the detection of split binaries, where the
previous logic sometimes concluded that the first segments was not
split, in a split image. The unconditional calling of
scm_pas_mem_setup() turns out to cause a regression and is reverted.
The altmode subfunction of pmic_glink is enabled for SM8450.
A new driver for exposing power statistics from the RPM, for debugging
purposes, is introduced.
OCMEM gets a debug prints of the hardware version, QMI helpers are
transitioned to alloc_ordered_workqueue() and an error message in
ramp_controller is improved.
An API is introduced to the SMEM driver to allow other drivers to query
the SoC id, rather than open-coding the parsing of the relevant SMEM
item. This is then used to clean up the Qualcomm NVMEM-based cpufreq
driver.
Socinfo is extended with knowledge about IPQ5018, IPQ5312 and IPQ5302.
* tag 'qcom-drivers-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
soc: qcom: ocmem: Add OCMEM hardware version print
cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
cpufreq: qcom-nvmem: use SoC ID-s from bindings
soc: qcom: smem: introduce qcom_smem_get_soc_id()
soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
soc: qcom: socinfo: move SMEM item struct and defines to a header
soc: qcom: mdt_loader: Fix unconditional call to scm_pas_mem_setup
MAINTAINERS: Add Konrad Dybcio as linux-arm-msm co-maintainer
dt-bindings: sram: qcom,imem: Document MSM8226
soc: qcom: socinfo: Add Soc ID for IPQ5312 and IPQ5302
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5312 and IPQ5302
soc: qcom: socinfo: Add IDs for IPQ5018 family
dt-bindings: arm: qcom,ids: Add IDs for IPQ5018 family
soc: qcom: Introduce RPM master stats driver
dt-bindings: soc: qcom: Add RPM Master stats
soc: qcom: qmi: Use alloc_ordered_workqueue() to create ordered workqueues
soc: qcom: ramp_controller: Improve error message for failure in .remove()
dt-bindings: soc: qcom: smd-rpm: allow MSM8226 over SMD
soc: qcom: rpmpd: use correct __le32 type
dt-bindings: soc: qcom: eud: Fix compatible string in the example
...
Link: https://lore.kernel.org/r/20230611010044.2481875-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
PCI: tegra: Changes for v6.5-rc1
This contains updates to the PCI driver for Tegra194 and later devices
that depend on the memory controller interconnect changes.
* tag 'tegra-for-6.5-pci' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
PCI: tegra194: Add interconnect support in Tegra234
PCI: tegra194: Fix possible array out of bounds access
Link: https://lore.kernel.org/r/20230609193620.2275240-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
memory: tegra: Changes for v6.5-rc1
This introduces an interconnect provider for the memory controller and
external memory controller found on Tegra234 chips that will eventually
be used to dynamically scale the EMC frequency based on a device's
bandwidth needs.
* tag 'tegra-for-6.5-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Make CPU cluster BW request a multiple of MC channels
memory: tegra: Add software memory clients in Tegra234
memory: tegra: Add memory clients for Tegra234
memory: tegra: Add interconnect support for DRAM scaling in Tegra234
dt-bindings: tegra: Add ICC IDs for dummy memory clients
dt-bindings: tegra: Document compatible for IGX
Link: https://lore.kernel.org/r/20230609193620.2275240-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.5-rc1
This adds support for using system memory as shared memory between the
CPU and the BPMP, which will be needed for Tegra264 support.
* tag 'tegra-for-6.5-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
Link: https://lore.kernel.org/r/20230609193620.2275240-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.5-rc1
This adds initial support for identifying the Tegra264 SoC family and
fixes potential issues when reading from the FUSE block. A new software
wake event for the AON cluster is added on Tegra234 and the debugfs
initialization is drastically simplified.
* tag 'tegra-for-6.5-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
soc/tegra: fuse: Fix Tegra234 fuse size
soc/tegra: pmc: Add AON SW Wake support for Tegra234
soc/tegra: fuse: Add support for Tegra264
Link: https://lore.kernel.org/r/20230609193620.2275240-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single regression fix for a regression fix:
For a long time the tick was aligned to clock MONOTONIC so that the
tick event happened at a multiple of nanoseconds per tick starting
from clock MONOTONIC = 0.
At some point this changed as the refined jiffies clocksource which is
used during boot before the TSC or other clocksources becomes usable,
was adjusted with a boot offset, so that time 0 is closer to the point
where the kernel starts.
This broke the assumption in the tick code that when the tick setup
happens early on ktime_get() will return a multiple of nanoseconds per
tick. As a consequence applications which aligned their periodic
execution so that it does not collide with the tick were not longer
guaranteed that the tick period starts from time 0.
The fix for this regression was to realign the tick when it is
initially set up to a multiple of tick periods. That works as long as
the underlying tick device supports periodic mode, but breaks under
certain conditions when the tick device supports only one shot mode.
Depending on the offset, the alignment delta to clock MONOTONIC can
get in a range where the minimal programming delta of the underlying
clock event device is larger than the calculated delta to the next
tick. This results in a boot hang as the tick code tries to play catch
up, but as the tick never fires jiffies are not advanced so it keeps
trying for ever.
Solve this by moving the tick alignement into the NOHZ / HIGHRES
enablement code because at that point it is guaranteed that the
underlying clocksource is high resolution capable and not longer
depending on the tick.
This is far before user space starts, so at the point where
applications try to align their timers, the old behaviour of the tick
happening at a multiple of nanoseconds per tick starting from clock
MONOTONIC = 0 is restored"
* tag 'timers-urgent-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/common: Align tick period during sched_timer setup
|
|
Fix the documentation of the devt_from_partuuid() return value.
Fix the following two recently introduced kernel-doc warnings:
block/bdev.c:570: warning: Function parameter or member 'hops' not described in 'bd_finish_claiming'
block/early-lookup.c:46: warning: Function parameter or member 'devt' not described in 'devt_from_partuuid'
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 0718afd47f70 ("block: introduce holder ops")
Fixes: cf056a431215 ("init: improve the name_to_dev_t interface")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230621165054.743815-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into soc/dt
ARM: dts: Move .dts files to vendor sub-directories
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
* tag 'arm-dts-mv-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
Link: https://lore.kernel.org/r/20230621185025.GA3197738-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are a few assignments to variable len where the value is not
being read and so the assignments are redundant and can be removed.
In one case, the variable len can be removed completely. Cleans up
4 clang scan warnings of the form:
fs/nfsd/export.c:100:7: warning: Although the value stored to 'len'
is used in the enclosing expression, the value is never actually
read from 'len' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The debug feature is supported since commit 8cc38fa7fa31 ("cgroup: make
debug an implicit controller on cgroup2"), update corresponding comment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Drop unused '_usb_writen_sync()' and relevant pointer
from 'struct rtl_io', handle possible write error in
'_usb_write_async()', adjust related code.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230614061832.40882-2-dmantipov@yandex.ru
|
|
Introduce 'rtl_init_sw_leds()' to replace per-chip LED
initialization code (and so drop 'struct rtl_led' as no
longer used), drop 'init_sw_leds' and 'deinit_sw_leds'
fields from 'struct rtl_hal_ops', adjust related code.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230614061832.40882-1-dmantipov@yandex.ru
|
|
ath.git patches for v6.5. Major changes:
ath11k
* factory test mode support
|
|
Pull virtio fix from Michael Tsirkin:
"A last minute revert to fix a regression"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
Revert "virtio-blk: support completion batching for the IRQ path"
|
|
Including an aligned structure inside of a packed one is ambiguous
and can lead to misaligned data, as pointed out by this clang warning:
drivers/net/wireless/ath/ath10k/htt.h:715:34: error: field prefix within 'struct htt_rx_indication' is less aligned than 'struct htt_rx_indication_prefix' and is usually due to 'struct htt_rx_indication' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
struct htt_rx_indication_prefix prefix;
^
drivers/net/wireless/ath/ath10k/htt.h:736:34: error: field prefix within 'struct htt_rx_indication_hl' is less aligned than 'struct htt_rx_indication_prefix' and is usually due to 'struct htt_rx_indication_hl' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
struct htt_rx_indication_prefix prefix;
^
drivers/net/wireless/ath/ath10k/htt.h:1564:2: error: field within 'struct htt_tx_fetch_ind' is less aligned than 'union htt_tx_fetch_ind::(anonymous at drivers/net/wireless/ath/ath10k/htt.h:1564:2)' and is usually due to 'struct htt_tx_fetch_ind' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
union {
^
drivers/net/wireless/ath/ath10k/htt.h:1702:2: error: field within 'struct htt_resp' is less aligned than 'union htt_resp::(anonymous at drivers/net/wireless/ath/ath10k/htt.h:1702:2)' and is usually due to 'struct htt_resp' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
These structures appear to actually need the packing since they
are embedded at misaligned offsets. Add even more such annotations
here to enforce bytewise access throughout the driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230616090439.2484857-1-arnd@kernel.org
|
|
Since 'ieee80211_queue_delayed_work()' expects timeout in
jiffies and not milliseconds, 'msecs_to_jiffies()' should
be used in 'ath_restart_work()' and '__ath9k_flush()'.
Fixes: d63ffc45c5d3 ("ath9k: rename tx_complete_work to hw_check_work")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230613134655.248728-1-dmantipov@yandex.ru
|
|
This reverts commit e7b813b32a42a3a6281a4fd9ae7700a0257c1d50 (and the
subsequent fix for it: 41a15855c1ee "efi: random: fix NULL-deref when
refreshing seed").
It turns otu to cause non-deterministic boot stalls on at least a HP
6730b laptop.
Reported-and-bisected-by: Sami Korkalainen <sami.korkalainen@proton.me>
Link: https://lore.kernel.org/all/GQUnKz2al3yke5mB2i1kp3SzNHjK8vi6KJEh7rnLrOQ24OrlljeCyeWveLW9pICEmB9Qc8PKdNt3w1t_g3-Uvxq1l8Wj67PpoMeWDoH8PKk=@proton.me/
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is now unused, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/20230620094519.15300-1-yuehaibing%40huawei.com
|
|
intel_idle will, for the bare metal case, usually have one or more deep
power states that have the CPUIDLE_FLAG_TLB_FLUSHED flag set. When
a state with this flag is selected by the cpuidle framework, it will also
flush the TLBs as part of entering this state. The benefit of doing this is
that the kernel does not need to wake the cpu out of this deep power state
just to flush the TLBs... for which the latency can be very high due to
the exit latency of deep power states.
In a VM guest currently, this benefit of avoiding the wakeup does not exist,
while the problem (long exit latency) is even more severe. Linux will need
to wake up a vCPU (causing the host to either come out of a deep C state,
or the VMM to have to deschedule something else to schedule the vCPU) which
can take a very long time.. adding a lot of latency to tlb flush operations
(including munmap and others).
To solve this, add a "Long HLT" C state to the state table for the VM guest
case that has the CPUIDLE_FLAG_TLB_FLUSHED flag set. The result of that is
that for long idle periods (where the VMM is likely to do things that cause
large latency) the cpuidle framework will flush the TLBs (and avoid the
wakeups), while for short/quick idle durations, the existing behavior is
retained.
Now, there is still only "hlt" available in the guest, but for long idle,
the host can go to a deeper state (say C6). There is a reasonable debate
one can have to what to set for the exit_latency and break even point for
this "Long HLT" state. The good news is that intel_idle has these values
available for the underlying CPU (even when mwait is not exposed). The
solution thus is to just use the latency and break even of the deepest state
from the bare metal CPU. This is under the assumption that this is a pretty
reasonable estimate of what the VMM would do to cause latency.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the intel_pstate driver is set to passive mode, then writing the
same value to the energy_performance_preference sysfs twice will fail.
This is caused by the wrong return value used (index of the matched
energy_perf_string), instead of the length of the passed in parameter.
Fix by forcing the internal return value to zero when the same
preference is passed in by user. This same issue is not present when
active mode is used for the driver.
Fixes: f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Niklas Neronin <niklas.neronin@intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
There's no change to dtbs_install as the flat structure is maintained on
install.
The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)
The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One last fix for SPI, just a simple fix for incorrect handling of
probe deferral for DMA in the Qualcomm GENI driver"
* tag 'spi-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One simple fix for v6.4, some incorrectly specified bitfield masks in
the PCA9450 driver"
* tag 'regulator-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pca9450: Fix LDO3OUT and LDO4OUT MASK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"One more fix for v6.4
The earlier fix to take account of the register data size when
limiting raw register writes exposed the fact that the Intel AVMM bus
was incorrectly specifying too low a limit on the maximum data
transfer, it is only capable of transmitting one register so had set a
transfer size limit that couldn't fit both the value and the the
register address into a single message"
* tag 'regmap-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: spi-avmm: Fix regmap_bus max_raw_write
|
|
Introduce driver specific uapi functionalites. Added a alloc_page
functionality for user library to allocate specific pages. Currently added
support for allocating write combine pages for push functinality. This
interface shall be extended for other page allocations.
Allocate a WC page using the uapi hook for enabling the low latency push
in Gen P5 adapters for small packets. This is supported only for the user
space QPs.
Link: https://lore.kernel.org/r/1686679943-17117-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Reorganize the code for allocation and mapping of Doorbell
pages. Implements new HW command to get the BAR length used by L2
driver. These changes are used by the future patch which maps the WC
Doorbell pages.
Also, introduced a new lock dpi_tbl_lock for synchronize the DB page
allocation from users.
Link: https://lore.kernel.org/r/1686679943-17117-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
FW interface version check is required for multiple features. Moving the
interface version to chip context structure.
Link: https://lore.kernel.org/r/1686679943-17117-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Query Function capabilities to enable advanced features.
Link: https://lore.kernel.org/r/1686679943-17117-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
As of now bnxt_re_init_hwrm_hdr is taking only the opcode from the
caller. compl_ring and target_id field is always -1. These fields might be
changed when newer features are added. For now, removing these parameters
as they are hard coded. Also, remove the rdev field which is not used.
Also, initialize the structure bnxt_fw_msg during declaration itself.
Link: https://lore.kernel.org/r/1686679943-17117-4-git-send-email-selvin.xavier@broadcom.com
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add driver disassociation support. Driver uses the APIs rdma_user_mmap_io
api while mapping the IO pages to user space. Add empty stub for
disassociate ucontext.
Link: https://lore.kernel.org/r/1686679943-17117-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace the mmap handling function with common code in IB core. Create
rdma_user_mmap_entry for each mmap resource and add to the ib_core mmap
list. Add mmap_free verb support. Also, use rdma_user_mmap_io while
mapping Doorbell pages.
Link: https://lore.kernel.org/r/1686679943-17117-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix compilation warning:
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:325:18:
error: variable 'opcode' is uninitialized when used here [-Werror,-Wuninitialized]
crsqe->opcode = opcode;
^~~~~~
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:291:11:
note: initialize the variable 'opcode' to silence this warning
u8 opcode;
^
= '\0'
Fixes: bcfee4ce3e01 ("RDMA/bnxt_re: remove redundant cmdq_bitmap")
Link: https://lore.kernel.org/r/6ad1e44be2b560986da6fdc6b68da606413e9026.1686644105.git.leonro@nvidia.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Users are having more success with amd-pstate since the introduction
of EPP and Guided modes. To expose the driver to more users by default
introduce a kernel configuration option for setting the default mode.
Users can use an integer to map out which default mode they want to use
in lieu of a kernel command line option.
This will default to EPP, but only if:
1) The CPU supports an MSR.
2) The system profile is identified
3) The system profile is identified as a non-server by the FADT.
Link: https://gitlab.freedesktop.org/hadess/power-profiles-daemon/-/merge_requests/121
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Co-developed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If a user's configuration doesn't explicitly specify the cpufreq
scaling governor then the code currently explicitly falls back to
'powersave'. This default is fine for notebooks and desktops, but
servers and undefined machines should default to 'performance'.
Look at the 'preferred_profile' field from the FADT to set this
policy accordingly.
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html#fixed-acpi-description-table-fadt
Acked-by: Huang Rui <ray.huang@amd.com>
Suggested-by: Wyes Karny <Wyes.Karny@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the event a new preferred PM profile value is introduced it's best for
code to be able to defensively guard against it so that the wrong settings
don't get applied on a new system that uses this profile but ancient
kernels.
Acked-by: Huang Rui <ray.huang@amd.com>
Suggested-by: Gautham Ranjal Shenoy <gautham.shenoy@amd.com>
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html#fixed-acpi-description-table-fadt
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This requires a patched ACPI table or a firmware from ASUS to work because
the system does not come with the _DSD field for the CSC3551.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217550
Signed-off-by: Matthew Anderson <ruinairas1992@gmail.com>
Tested-by: Philip Mueller <philm@manjaro.org>
Link: https://lore.kernel.org/r/20230621161714.9442-1-ruinairas1992@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
to make the page more organized as requested
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230618062937.481280-1-costa.shul@redhat.com
|
