| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Miscellaneous perf events fixes and a minor HW enablement change:
- Fix missing RCU protection in perf_iterate_ctx()
- Fix pmu_ctx_list ordering bug
- Reject the zero page in uprobes
- Fix a family of bugs related to low frequency sampling
- Add Intel Arrow Lake U CPUs to the generic Arrow Lake RAPL support
table
- Fix a lockdep-assert false positive in uretprobes"
* tag 'perf-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Remove too strict lockdep_assert() condition in hprobe_expire()
perf/x86/rapl: Add support for Intel Arrow Lake U
perf/x86/intel: Use better start period for frequency mode
perf/core: Fix low freq setting via IOC_PERIOD
perf/x86: Fix low freqency setting issue
uprobes: Reject the shared zeropage in uprobe_write_opcode()
perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list
perf/core: Add RCU read lock protection to perf_iterate_ctx()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix an objtool false positive, and objtool related build warnings that
happens on PIE-enabled architectures such as LoongArch"
* tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
objtool: Fix C jump table annotations for Clang
vmlinux.lds: Ensure that const vars with relocations are mapped R/O
|
|
In __udp_gso_segment the skb destructor is removed before segmenting the
skb but the socket reference is kept as-is. This is an issue if the
original skb is later orphaned as we can hit the following bug:
kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan)
RIP: 0010:ip_rcv_core+0x8b2/0xca0
Call Trace:
ip_rcv+0xab/0x6e0
__netif_receive_skb_one_core+0x168/0x1b0
process_backlog+0x384/0x1100
__napi_poll.constprop.0+0xa1/0x370
net_rx_action+0x925/0xe50
The above can happen following a sequence of events when using
OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an
OVS_ACTION_ATTR_OUTPUT action:
1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb
goes through queue_gso_packets and then __udp_gso_segment, where its
destructor is removed.
2. The segments' data are copied and sent to userspace.
3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the
same original skb is sent to its path.
4. If it later hits skb_orphan, we hit the bug.
Fix this by also removing the reference to the socket in
__udp_gso_segment.
Fixes: ad405857b174 ("udp: better wmem accounting on gso")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250226171352.258045-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We shouldn't be setting incompatible bits or the incompatible version
field unless explicitly request or allowed - otherwise we break mounting
with old kernels or userspace.
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix an rcuref_put() slowpath race"
* tag 'locking-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcuref: Plug slowpath race in rcuref_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Intel VT-d fixes:
- Fix suspicious RCU usage splat
- Fix passthrough for devices under PCIe-PCI bridge
- AMD-Vi fix:
- Fix to preserve bits when updating device table entries
* tag 'iommu-fixes-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Fix suspicious RCU usage
iommu/vt-d: Remove device comparison in context_setup_pass_through_cb
iommu/amd: Preserve default DTE fields when updating Host Page Table Root
|
|
Eric Dumazet says:
====================
inet: ping: remove extra skb_clone()/consume_skb()
First patch in the series moves ICMP_EXT_ECHOREPLY handling in icmp_rcv()
to prepare the second patch.
The second patch removes one skb_clone()/consume_skb() pair
when processing ICMP_EXT_REPLY packets. Some people
use hundreds of "ping -fq ..." to stress hosts :)
====================
Link: https://patch.msgid.link/20250226183437.1457318-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ping_rcv() callers currently call skb_free() or consume_skb(),
forcing ping_rcv() to clone the skb.
After this patch ping_rcv() is now 'consuming' the original skb,
either moving to a socket receive queue, or dropping it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250226183437.1457318-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no point processing ICMP_EXT_ECHOREPLY for routes
which would drop ICMP_ECHOREPLY (RFC 1122 3.2.2.6, 3.2.2.8)
This seems an oversight of the initial implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250226183437.1457318-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- mgmt: Check return of mgmt_alloc_skb
- btusb: Initialize .owner field of force_poll_sync_fops
* tag 'for-net-2025-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected()
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_remote_name()
bluetooth: btusb: Initialize .owner field of force_poll_sync_fops
====================
Link: https://patch.msgid.link/20250227223802.3299088-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Property "supports-sd" isn't documented anywhere and is unnecessary for
mainline driver to function. It seems a property used by downstream
kernel was brought into mainline.
This should be reported by dtbs_check, but mmc-controller-common.yaml
defaults additionalProperties to true thus allows it. Remove the
property to clean the devicetree up and avoid possible confusion.
Fixes: 8d94da58de53 ("arm64: dts: rockchip: Add EmbedFire LubanCat 1")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250228163117.47318-2-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Intel idle driver is preferred over the ACPI processor idle driver,
but fails to implement the work around for Core2 generation CPUs, where
the TSC stops in C2 and deeper C-states. This causes stalls and boot
delays, when the clocksource watchdog does not catch the unstable TSC
before the CPU goes deep idle for the first time.
The ACPI driver marks the TSC unstable when it detects that the CPU
supports C2 or deeper and the CPU does not have a non-stop TSC.
Add the equivivalent work around to the Intel idle driver to cure that.
Fixes: 18734958e9bf ("intel_idle: Use ACPI _CST for processor models without C-state tables")
Reported-by: Fab Stz <fabstz-it@yahoo.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Fab Stz <fabstz-it@yahoo.fr>
Cc: All applicable <stable@vger.kernel.org>
Closes: https://lore.kernel.org/all/10cf96aa-1276-4bd4-8966-c890377030c3@yahoo.fr
Link: https://patch.msgid.link/87bjupfy7f.ffs@tglx
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Russell King says:
====================
net: stmmac: cleanup transmit clock setting
A lot of stmmac platform code which sets the transmit clock is very
similar - they decode the speed to the clock rate (125, 25 or 2.5 MHz)
and then set a clock to that rate.
The DWMAC core appears to have a clock input for the transmit section
called clk_tx_i which requires this rate.
This series moves the code which sets this clock into the core stmmac
code.
Patch 1 adds a hook that platforms can use to configure the clock rate.
Patch 2 adds a generic implementation.
The remainder of the patches convert the glue code for various platforms
to use this new infrastructure.
====================
Link: https://patch.msgid.link/Z8AtX-wyPal1auVO@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna14-0052tT-S4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0z-0052tN-O1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0u-0052tH-KQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0p-0052t8-Gn@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert non-i.MX93 users to use the generic stmmac_set_clk_tx_rate() to
configure the MAC transmit clock rate.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0k-0052t2-Cc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Note that given the current unpatched driver structure,
plat_dat->fix_mac_speed will always be populated with
kmb_eth_fix_mac_speed(), even when no clock is present. We preserve
this behaviour in this patch by always initialising plat_dat->clk_tx_i
and plat_dat->set_clk_tx_rate.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0f-0052sw-8r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0a-0052sq-59@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0V-0052sk-1L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0P-0052se-Tv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a generic implementation for the set_clk_tx_rate method
introduced by the previous patch, which is capable of configuring the
MAC transmit clock for 10M, 100M and 1000M speeds for at least MII,
GMII, RGMII and RMII interface modes.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0K-0052sY-QF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several stmmac sub-drivers which support RGMII follow the same pattern.
They calculate the transmit clock rate, and then call clk_set_rate().
Analysis of several implementation documents suggests that the platform
is responsible for providing the transmit clock to the DWMAC core's
clk_tx_i. The expected rates are:
10Mbps 100Mbps 1Gbps
MII 2.5MHz 25MHz
RMII 2.5MHz 25MHz
GMII 125MHz
RGMI 2.5MHz 25MHz 125MHz
It seems some platforms require this clock to be manually configured,
but there are outputs from the MAC core that indicate the speed, so a
platform may use these to automatically configure the clock. Thus, we
can't just provide one solution to configure this clock rate.
Moreover, the clock may need to be derived from one of several sources
depending on the interface mode.
Provide a platform hook that is passed the transmit clock, interface
mode and speed.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0F-0052sS-Lr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Fix plugging for native zone writes
- Fix segment limit settings for != 4K page size archs
- Fix for slab names overflowing
* tag 'block-6.14-20250228' of git://git.kernel.dk/linux:
block: fix 'kmem_cache of name 'bio-108' already exists'
block: Remove zone write plugs when handling native zone append writes
block: make segment size limit workable for > 4K PAGE_SIZE
|
|
Snapshot the host's DEBUGCTL after disabling IRQs, as perf can toggle
debugctl bits from IRQ context, e.g. when enabling/disabling events via
smp_call_function_single(). Taking the snapshot (long) before IRQs are
disabled could result in KVM effectively clobbering DEBUGCTL due to using
a stale snapshot.
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Manually load the guest's DEBUGCTL prior to VMRUN (and restore the host's
value on #VMEXIT) if it diverges from the host's value and LBR
virtualization is disabled, as hardware only context switches DEBUGCTL if
LBR virtualization is fully enabled. Running the guest with the host's
value has likely been mildly problematic for quite some time, e.g. it will
result in undesirable behavior if BTF diverges (with the caveat that KVM
now suppresses guest BTF due to lack of support).
But the bug became fatal with the introduction of Bus Lock Trap ("Detect"
in kernel paralance) support for AMD (commit 408eb7417a92
("x86/bus_lock: Add support for AMD")), as a bus lock in the guest will
trigger an unexpected #DB.
Note, suppressing the bus lock #DB, i.e. simply resuming the guest without
injecting a #DB, is not an option. It wouldn't address the general issue
with DEBUGCTL, e.g. for things like BTF, and there are other guest-visible
side effects if BusLockTrap is left enabled.
If BusLockTrap is disabled, then DR6.BLD is reserved-to-1; any attempts to
clear it by software are ignored. But if BusLockTrap is enabled, software
can clear DR6.BLD:
Software enables bus lock trap by setting DebugCtl MSR[BLCKDB] (bit 2)
to 1. When bus lock trap is enabled, ... The processor indicates that
this #DB was caused by a bus lock by clearing DR6[BLD] (bit 11). DR6[11]
previously had been defined to be always 1.
and clearing DR6.BLD is "sticky" in that it's not set (i.e. lowered) by
other #DBs:
All other #DB exceptions leave DR6[BLD] unmodified
E.g. leaving BusLockTrap enable can confuse a legacy guest that writes '0'
to reset DR6.
Reported-by: rangemachine@gmail.com
Reported-by: whanos@sergal.fun
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219787
Closes: https://lore.kernel.org/all/bug-219787-28872@https.bugzilla.kernel.org%2F
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move KVM's snapshot of DEBUGCTL to kvm_vcpu_arch and take the snapshot in
common x86, so that SVM can also use the snapshot.
Opportunistically change the field to a u64. While bits 63:32 are reserved
on AMD, not mentioned at all in Intel's SDM, and managed as an "unsigned
long" by the kernel, DEBUGCTL is an MSR and therefore a 64-bit value.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Mark BTF as reserved in DEBUGCTL on AMD, as KVM doesn't actually support
BTF, and fully enabling BTF virtualization is non-trivial due to
interactions with the emulator, guest_debug, #DB interception, nested SVM,
etc.
Don't inject #GP if the guest attempts to set BTF, as there's no way to
communicate lack of support to the guest, and instead suppress the flag
and treat the WRMSR as (partially) unsupported.
In short, make KVM behave the same on AMD and Intel (VMX already squashes
BTF).
Note, due to other bugs in KVM's handling of DEBUGCTL, the only way BTF
has "worked" in any capacity is if the guest simultaneously enables LBRs.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop bits 5:2 from the guest's effective DEBUGCTL value, as AMD changed
the architectural behavior of the bits and broke backwards compatibility.
On CPUs without BusLockTrap (or at least, in APMs from before ~2023),
bits 5:2 controlled the behavior of external pins:
Performance-Monitoring/Breakpoint Pin-Control (PBi)—Bits 5:2, read/write.
Software uses thesebits to control the type of information reported by
the four external performance-monitoring/breakpoint pins on the
processor. When a PBi bit is cleared to 0, the corresponding external pin
(BPi) reports performance-monitor information. When a PBi bit is set to
1, the corresponding external pin (BPi) reports breakpoint information.
With the introduction of BusLockTrap, presumably to be compatible with
Intel CPUs, AMD redefined bit 2 to be BLCKDB:
Bus Lock #DB Trap (BLCKDB)—Bit 2, read/write. Software sets this bit to
enable generation of a #DB trap following successful execution of a bus
lock when CPL is > 0.
and redefined bits 5:3 (and bit 6) as "6:3 Reserved MBZ".
Ideally, KVM would treat bits 5:2 as reserved. Defer that change to a
feature cleanup to avoid breaking existing guest in LTS kernels. For now,
drop the bits to retain backwards compatibility (of a sort).
Note, dropping bits 5:2 is still a guest-visible change, e.g. if the guest
is enabling LBRs *and* the legacy PBi bits, then the state of the PBi bits
is visible to the guest, whereas now the guest will always see '0'.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an L1 (guest) assert to the nested exceptions test to verify that KVM
doesn't put VMRUN in an STI shadow (AMD CPUs bleed the shadow into the
guest's int_state if a #VMEXIT occurs before VMRUN fully completes).
Add a similar assert to the VMX side as well, because why not.
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Enable/disable local IRQs, i.e. set/clear RFLAGS.IF, in the common
svm_vcpu_enter_exit() just after/before guest_state_{enter,exit}_irqoff()
so that VMRUN is not executed in an STI shadow. AMD CPUs have a quirk
(some would say "bug"), where the STI shadow bleeds into the guest's
intr_state field if a #VMEXIT occurs during injection of an event, i.e. if
the VMRUN doesn't complete before the subsequent #VMEXIT.
The spurious "interrupts masked" state is relatively benign, as it only
occurs during event injection and is transient. Because KVM is already
injecting an event, the guest can't be in HLT, and if KVM is querying IRQ
blocking for injection, then KVM would need to force an immediate exit
anyways since injecting multiple events is impossible.
However, because KVM copies int_state verbatim from vmcb02 to vmcb12, the
spurious STI shadow is visible to L1 when running a nested VM, which can
trip sanity checks, e.g. in VMware's VMM.
Hoist the STI+CLI all the way to C code, as the aforementioned calls to
guest_state_{enter,exit}_irqoff() already inform lockdep that IRQs are
enabled/disabled, and taking a fault on VMRUN with RFLAGS.IF=1 is already
possible. I.e. if there's kernel code that is confused by running with
RFLAGS.IF=1, then it's already a problem. In practice, since GIF=0 also
blocks NMIs, the only change in exposure to non-KVM code (relative to
surrounding VMRUN with STI+CLI) is exception handling code, and except for
the kvm_rebooting=1 case, all exception in the core VM-Enter/VM-Exit path
are fatal.
Use the "raw" variants to enable/disable IRQs to avoid tracing in the
"no instrumentation" code; the guest state helpers also take care of
tracing IRQ state.
Oppurtunstically document why KVM needs to do STI in the first place.
Reported-by: Doug Covelli <doug.covelli@broadcom.com>
Closes: https://lore.kernel.org/all/CADH9ctBs1YPmE4aCfGPNBwA10cA8RuAk2gO7542DjMZgs4uzJQ@mail.gmail.com
Fixes: f14eec0a3203 ("KVM: SVM: move more vmentry code to assembly")
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix headed for stable, ensuring that msg_control is
properly saved in compat mode as well"
* tag 'io_uring-6.14-20250228' of git://git.kernel.dk/linux:
io_uring/net: save msg_control for compat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another couple of EFI fixes for v6.14.
Only James's patch stands out, as it implements a workaround for odd
behavior in fwupd in user space, which creates EFI variables by
touching a file in efivarfs, clearing the immutable bit (which gets
set automatically for $reasons) and then opening it again for writing,
none of which is really necessary.
The fwupd author and LVFS maintainer is already rolling out a fix for
this on the fwupd side, and suggested that the workaround in this PR
could be backed out again during the next cycle.
(There is a semantic mismatch in efivarfs where some essential
variable attributes are stored in the first 4 bytes of the file, and
so zero length files cannot exist, as they cannot be written back to
the underlying variable store. So now, they are dropped once the last
reference is released.)
Summary:
- Fix CPER error record parsing bugs
- Fix a couple of efivarfs issues that were introduced in the merge
window
- Fix an issue in the early remapping code of the MOKvar table"
* tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/mokvar-table: Avoid repeated map/unmap of the same page
efi: Don't map the entire mokvar table to determine its size
efivarfs: allow creation of zero length files
efivarfs: Defer PM notifier registration until .fill_super
efi/cper: Fix cper_arm_ctx_info alignment
efi/cper: Fix cper_ia_proc_ctx alignment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.14-rc5
- npcm fixes interrupt initialization sequence.
- ls2x fixes frequency setting.
- amd-asf re-enables interrupts properly at irq handler's exit.
|
|
The gpiod_direction_input_nonotify() function is supposed to return zero
if the direction for the pin is input. But instead it accidentally
returns GPIO_LINE_DIRECTION_IN (1) which will be cast into an ERR_PTR()
in gpiochip_request_own_desc(). The callers dereference it and it leads
to a crash.
I changed gpiod_direction_output_raw_commit() just for consistency but
returning GPIO_LINE_DIRECTION_OUT (0) is fine.
Cc: stable@vger.kernel.org
Fixes: 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/254f3925-3015-4c9d-aac5-bb9b4b2cd2c5@stanley.mountain
[Bartosz: moved the variable declarations to the top of the functions]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Device mapper bioset often has big bio_slab size, which can be more than
1000, then 8byte can't hold the slab name any more, cause the kmem_cache
allocation warning of 'kmem_cache of name 'bio-108' already exists'.
Fix the warning by extending bio_slab->name to 12 bytes, but fix output
of /proc/slabinfo
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228132656.2838008-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce the sta_set_mesh_sinfo() to populate mesh related
fields in sinfo structure for station statistics.
This will allow for the simplified population of other fields in the
sinfo structure for link level in a subsequent patch to add support
for MLO station statistics.
No functionality changes added.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250213171632.1646538-3-quic_sarishar@quicinc.com
[reword since it's just an internal thing]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, as multi-link operation(MLO) is not supported for mesh,
reorganize the sinfo structure for mesh-specific fields and embed
mesh related NL attributes together in organized view.
This will allow for the simplified reorganization of sinfo structure
for link level in a subsequent patch to add support for MLO station
statistics.
No functionality changes added.
Pahole summary before the reorg of sinfo structure:
- size: 256, cachelines: 4, members: 50
- sum members: 239, holes: 4, sum holes: 17
- paddings: 2, sum paddings: 2
- forced alignments: 1, forced holes: 1, sum forced holes: 1
Pahole summary after the reorg of sinfo structure:
- size: 248, cachelines: 4, members: 50
- sum members: 239, holes: 4, sum holes: 9
- paddings: 2, sum paddings: 2
- forced alignments: 1, last cacheline: 56 bytes
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250213171632.1646538-2-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There is a spelling mistake in a IWL_DEBUG_RATE message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250227221917.658401-1-colin.i.king@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Fixes: d74169ceb0d2 ("iommu/vt-d: Allocate DMAR fault interrupts locally")
Reported-and-tested-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://lore.kernel.org/linux-iommu/Zx9OwdLIc_VoQ0-a@shredder.mtl.com/
Tested-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250218022422.2315082-1-baolu.lu@linux.intel.com
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Remove the device comparison check in context_setup_pass_through_cb.
pci_for_each_dma_alias already makes a decision on whether the
callback function should be called for a device. With the check
in place it will fail to create context entries for aliases as
it walks up to the root bus.
Fixes: 2031c469f816 ("iommu/vt-d: Add support for static identity domain")
Closes: https://lore.kernel.org/linux-iommu/82499eb6-00b7-4f83-879a-e97b4144f576@linux.intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20250224180316.140123-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When updating the page table root field on the DTE, avoid overwriting any
bits that are already set. The earlier call to make_clear_dte() writes
default values that all DTEs must have set (currently DTE[V]), and those
must be preserved.
Currently this doesn't cause problems since the page table root update is
the first field that is set after make_clear_dte() is called, and
DTE_FLAG_V is set again later along with the permission bits (IR/IW).
Remove this redundant assignment too.
Fixes: fd5dff9de4be ("iommu/amd: Modify set_dte_entry() to use 256-bit DTE helpers")
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250106191413.3107140-1-alejandro.j.jimenez@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
After some digging around I have found that this laptop has Cirrus's smart
aplifiers connected to SPI bus (spi1-CSC3551:00-cs35l41-hda).
To get them correctly detected and working I had to modify patch_realtek.c
with ASUS EXPERTBOOK P5405CSA 1.0 SystemID (0x1043, 0x1f63) and add
corresponding hda_quirk (ALC245_FIXUP_CS35L41_SPI_2).
Signed-off-by: Daniel Bárta <daniel.barta@trustlab.cz>
Link: https://patch.msgid.link/20250227161256.18061-2-daniel.barta@trustlab.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the basic quirk for this type of amplifier. Sound works in speakers,
headphones, and microphone. Whereas none worked before.
Tested-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20250227175107.33432-3-lkml@antheas.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In commit 1e9c708dc3ae ("ALSA: hda/tas2781: Add new quirk for Lenovo,
ASUS, Dell projects") Baojun adds a bunch of projects to the file,
including for the Ally X. Turns out the initial Ally X was not sorted
properly, so the kernel had 2 quirks for it.
The previous quirk overrode the new one due to being earlier and they
are different. When AB testing, the normal pin fixup seems to work ok
but causes a bit of a minor popping. Given the other config is more
complicated and may cause undefined behavior, revert it.
Fixes: 1e9c708dc3ae ("ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects")
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20250227175107.33432-2-lkml@antheas.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
st1202_dt_init() calls devm_led_classdev_register_ext() before the
internal data structures are properly set up, so the LEDs become visible
to user space while being partially initialized, leading to a window
where trying to access them causes a NULL pointer access.
Move devm_led_classdev_register_ext() from DT initialization
to the end of the probe function when DT and hardware are fully
initialized and ready to interact with user space.
Fixes: 259230378c65 ("leds: Add LED1202 I2C driver")
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB54732771AC0CE5491B3C84DCC5C32@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Tariq Toukan says:
====================
mlx5: Trust lockdown health syndrome
This series introduces a new error type in the health syndrome,
specifically for trust lock-down. Additionally, it exposes the CRR bit
in the health buffer, which, when set, indicates that the error cannot
be recovered without a process involving a cold reset. We add The CRR
bit value to the health buffer info log and update it to be logged on
any syndrome.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the new health syndrome value to hsynd_str() function
to indicate that the device got a trust lockdown fault.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
