summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-12i2c: sis630: Fix an error handling path in sis630_probe()Christophe JAILLET
If i2c_add_adapter() fails, the request_region() call in sis630_setup() must be undone by a corresponding release_region() call, as done in the remove function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/3d607601f2c38e896b10207963c6ab499ca5c307.1741033587.git.christophe.jaillet@wanadoo.fr Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2025-03-12i2c: ali15x3: Fix an error handling path in ali15x3_probe()Christophe JAILLET
If i2c_add_adapter() fails, the request_region() call in ali15x3_setup() must be undone by a corresponding release_region() call, as done in the remove function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/9b2090cbcc02659f425188ea05f2e02745c4e67b.1741031878.git.christophe.jaillet@wanadoo.fr
2025-03-12i2c: ali1535: Fix an error handling path in ali1535_probe()Christophe JAILLET
If i2c_add_adapter() fails, the request_region() call in ali1535_setup() must be undone by a corresponding release_region() call, as done in the remove function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/0daf63d7a2ce74c02e2664ba805bbfadab7d25e5.1741031571.git.christophe.jaillet@wanadoo.fr
2025-03-12i2c: omap: fix IRQ stormsAndreas Kemnade
On the GTA04A5 writing a reset command to the gyroscope causes IRQ storms because NACK IRQs are enabled and therefore triggered but not acked. Sending a reset command to the gyroscope by i2cset 1 0x69 0x14 0xb6 with an additional debug print in the ISR (not the thread) itself causes [ 363.353515] i2c i2c-1: ioctl, cmd=0x720, arg=0xbe801b00 [ 363.359039] omap_i2c 48072000.i2c: addr: 0x0069, len: 2, flags: 0x0, stop: 1 [ 363.366180] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x1110) [ 363.371673] omap_i2c 48072000.i2c: IRQ (ISR = 0x0010) [ 363.376892] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102) [ 363.382263] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102) [ 363.387664] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102) repeating till infinity [...] (0x2 = NACK, 0x100 = Bus free, which is not enabled) Apparently no other IRQ bit gets set, so this stalls. Do not ignore enabled interrupts and make sure they are acked. If the NACK IRQ is not needed, it should simply not enabled, but according to the above log, caring about it is necessary unless the Bus free IRQ is enabled and handled. The assumption that is will always come with a ARDY IRQ, which was the idea behind ignoring it, proves wrong. It is true for simple reads from an unused address. To still avoid the i2cdetect trouble which is the reason for commit c770657bd261 ("i2c: omap: Fix standard mode false ACK readings"), avoid doing much about NACK in omap_i2c_xfer_data() which is used by both IRQ mode and polling mode, so also the false detection fix is extended to polling usage and IRQ storms are avoided. By changing this, the hardirq handler is not needed anymore to filter stuff. The mentioned gyro reset now just causes a -ETIMEDOUT instead of hanging the system. Fixes: c770657bd261 ("i2c: omap: Fix standard mode false ACK readings"). CC: stable@kernel.org Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250228140420.379498-1-andreas@kemnade.info
2025-03-12mmc: atmel-mci: Add missing clk_disable_unprepare()Gu Bowen
The error path when atmci_configure_dma() set dma fails in atmci driver does not correctly disable the clock. Add the missing clk_disable_unprepare() to the error path for pair with clk_prepare_enable(). Fixes: 467e081d23e6 ("mmc: atmel-mci: use probe deferring if dma controller is not ready yet") Signed-off-by: Gu Bowen <gubowen5@huawei.com> Acked-by: Aubin Constans <aubin.constans@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250225022856.3452240-1-gubowen5@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-03-12wifi: mac80211: fix MPDU length parsing for EHT 5/6 GHzBenjamin Berg
The MPDU length is only configured using the EHT capabilities element on 2.4 GHz. On 5/6 GHz it is configured using the VHT or HE capabilities respectively. Fixes: cf0079279727 ("wifi: mac80211: parse A-MSDU len from EHT capabilities") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20250311121704.0634d31f0883.I28063e4d3ef7d296b7e8a1c303460346a30bf09c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-12ARM: shmobile: smp: Enforce shmobile_smp_* alignmentGeert Uytterhoeven
When the addresses of the shmobile_smp_mpidr, shmobile_smp_fn, and shmobile_smp_arg variables are not multiples of 4 bytes, secondary CPU bring-up fails: smp: Bringing up secondary CPUs ... CPU1: failed to come online CPU2: failed to come online CPU3: failed to come online smp: Brought up 1 node, 1 CPU Fix this by adding the missing alignment directive. Fixes: 4e960f52fce16a3b ("ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss") Closes: https://lore.kernel.org/r/CAMuHMdU=QR-JLgEHKWpsr6SbaZRc-Hz9r91JfpP8c3n2G-OjqA@mail.gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/c499234d559a0d95ad9472883e46077311051cd8.1741612208.git.geert+renesas@glider.be Cc: stable@vger.kernel.org
2025-03-12scripts: generate_rust_analyzer: add uapi crateTamir Duberstein
Commit 4e1746656839 ("rust: uapi: Add UAPI crate") did not update rust-analyzer to include the new crate. Add the missing definition to improve the developer experience. Fixes: 4e1746656839 ("rust: uapi: Add UAPI crate") Signed-off-by: Tamir Duberstein <tamird@gmail.com> Tested-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20250210-rust-analyzer-bindings-include-v2-2-23dff845edc3@gmail.com [ Slightly reworded title. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-03-12scripts: generate_rust_analyzer: add missing include_dirsTamir Duberstein
Commit 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`") specified OBJTREE for the bindings crate, and `source.include_dirs` for the kernel crate, likely in an attempt to support out-of-source builds for those crates where the generated files reside in `objtree` rather than `srctree`. This was insufficient because both bits of configuration are required for each crate; the result is that rust-analyzer is unable to resolve generated files for either crate in an out-of-source build. [ Originally we were not using `OBJTREE` in the `kernel` crate, but we did pass the variable anyway, so conceptually it could have been there since then. Regarding `include_dirs`, it started in `kernel` before being in mainline because we included the bindings directly there (i.e. there was no `bindings` crate). However, when that crate got created, we moved the `OBJTREE` there but not the `include_dirs`. Nowadays, though, we happen to need the `include_dirs` also in the `kernel` crate for `generated_arch_static_branch_asm.rs` which was not there back then -- Tamir confirms it is indeed required for that reason. - Miguel ] Add the missing bits to improve the developer experience. Fixes: 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`") Signed-off-by: Tamir Duberstein <tamird@gmail.com> Tested-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20250210-rust-analyzer-bindings-include-v2-1-23dff845edc3@gmail.com [ Slightly reworded title. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-03-11Merge tag 'hyperv-fixes-signed-20250311' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Patches to fix Hyper-v framebuffer code (Michael Kelley and Saurabh Sengar) - Fix for Hyper-V output argument to hypercall that changes page visibility (Michael Kelley) - Fix for Hyper-V VTL mode (Naman Jain) * tag 'hyperv-fixes-signed-20250311' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Don't release fb_mmio resource in vmbus_free_mmio() x86/hyperv: Fix output argument to hypercall that changes page visibility fbdev: hyperv_fb: Allow graceful removal of framebuffer fbdev: hyperv_fb: Simplify hvfb_putmem fbdev: hyperv_fb: Fix hang in kdump kernel when on Hyper-V Gen 2 VMs drm/hyperv: Fix address space leak when Hyper-V DRM device is removed fbdev: hyperv_fb: iounmap() the correct memory when removing a device x86/hyperv/vtl: Stop kernel from probing VTL0 low memory
2025-03-11scripts: generate_rust_analyzer: add missing macros depsTamir Duberstein
The macros crate has depended on std and proc_macro since its introduction in commit 1fbde52bde73 ("rust: add `macros` crate"). These dependencies were omitted from commit 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`") resulting in missing go-to-definition and autocomplete, and false-positive warnings emitted from rust-analyzer such as: [{ "resource": "/Users/tamird/src/linux/rust/macros/module.rs", "owner": "_generated_diagnostic_collection_name_#1", "code": { "value": "non_snake_case", "target": { "$mid": 1, "path": "/rustc/", "scheme": "https", "authority": "doc.rust-lang.org", "query": "search=non_snake_case" } }, "severity": 4, "message": "Variable `None` should have snake_case name, e.g. `none`", "source": "rust-analyzer", "startLineNumber": 123, "startColumn": 17, "endLineNumber": 123, "endColumn": 21 }] Add the missing dependencies to improve the developer experience. [ Fiona had a different approach (thanks!) at: https://lore.kernel.org/rust-for-linux/20241205115438.234221-1-me@kloenk.dev/ But Tamir and Fiona agreed to this one. - Miguel ] Fixes: 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`") Reviewed-by: Fiona Behrens <me@kloenk.dev> Diagnosed-by: Chayim Refael Friedman <chayimfr@gmail.com> Link: https://github.com/rust-lang/rust-analyzer/issues/17759#issuecomment-2646328275 Signed-off-by: Tamir Duberstein <tamird@gmail.com> Tested-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20250210-rust-analyzer-macros-core-dep-v3-1-45eb4836f218@gmail.com [ Removed `return`. Changed tag name. Added Link. Slightly reworded. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-03-11rust: Disallow BTF generation with Rust + LTOMatthew Maurer
The kernel cannot currently self-parse BTF containing Rust debug information. pahole uses the language of the CU to determine whether to filter out debug information when generating the BTF. When LTO is enabled, Rust code can cross CU boundaries, resulting in Rust debug information in CUs labeled as C. This results in a system which cannot parse its own BTF. Signed-off-by: Matthew Maurer <mmaurer@google.com> Cc: stable@vger.kernel.org Fixes: c1177979af9c ("btf, scripts: Exclude Rust CUs with pahole") Link: https://lore.kernel.org/r/20250108-rust-btf-lto-incompat-v1-1-60243ff6d820@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-03-11drm/i915: Increase I915_PARAM_MMAP_GTT_VERSION version to indicate support ↵José Roberto de Souza
for partial mmaps Commit 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping") was the last patch of several patches fixing multiple partial mmaps. But without a bump in I915_PARAM_MMAP_GTT_VERSION there is no clean way for UMD to know if it can do multiple partial mmaps. Fixes: 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping") Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250306210827.171147-1-jose.souza@intel.com (cherry picked from commit bfef148f3680e6b9d28e7fca46d9520f80c5e50e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-03-11Merge tag 'samsung-clk-fixes-6.14' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-fixes Pull Samsung clk driver fixes from Krzysztof Kozlowski: - Google GS101: Fix synchronous external abort during system suspend. The driver access registers not available for OS, although issue would not be visible in earlier kernels due to missing suspend support. - Tesla FSD: Correct PLL142XX lock time * tag 'samsung-clk-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: clk: samsung: update PLL locktime for PLL142XX used on FSD platform clk: samsung: gs101: fix synchronous external abort in samsung_clk_save()
2025-03-11Merge tag 'pinctrl-v6.14-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix the regmap settings for bcm281xx, this was missing the stride - NULL check for the Nuvoton npcm8xx devm_kasprintf() - Enable the Spacemit pin controller by default in the SoC config. The SoC will not boot without it so this one is pretty much required * tag 'pinctrl-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: spacemit: enable config option pinctrl: nuvoton: npcm8xx: Add NULL check in npcm8xx_gpio_fw pinctrl: bcm281xx: Fix incorrect regmap max_registers value
2025-03-11platform/surface: aggregator_registry: Add Support for Surface Pro 11Lukas Hetzenecker
Add SAM client device nodes for the Surface Pro 11 (Intel). Like with the Surface Pro 10 already, the node group is compatible, so it can be reused. Signed-off-by: Lukas Hetzenecker <lukas@hetzenecker.me> Link: https://lore.kernel.org/r/20250310232803.23691-1-lukas@hetzenecker.me Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-11platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()Dan Carpenter
There are a few problems in this code: First, if amd_pmf_tee_init() fails then the function returns directly instead of cleaning up. We cannot simply do a "goto error;" because the amd_pmf_tee_init() cleanup calls tee_shm_free(dev->fw_shm_pool); and amd_pmf_tee_deinit() calls it as well leading to a double free. I have re-written this code to use an unwind ladder to free the allocations. Second, if amd_pmf_start_policy_engine() fails on every iteration though the loop then the code calls amd_pmf_tee_deinit() twice which is also a double free. Call amd_pmf_tee_deinit() inside the loop for each failed iteration. Also on that path the error codes are not necessarily negative kernel error codes. Set the error code to -EINVAL. There is a very subtle third bug which is that if the call to input_register_device() in amd_pmf_register_input_device() fails then we call input_unregister_device() on an input device that wasn't registered. This will lead to a reference counting underflow because of the device_del(&dev->dev) in __input_unregister_device(). It's unlikely that anyone would ever hit this bug in real life. Fixes: 376a8c2a1443 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/232231fc-6a71-495e-971b-be2a76f6db4c@stanley.mountain Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-11bcachefs: Make sure trans is unlocked when submitting read IOKent Overstreet
We were still using the trans after the unlock, leading to this bug in the retry path: 00255 ------------[ cut here ]------------ 00255 kernel BUG at fs/bcachefs/btree_iter.c:3348! 00255 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP 00255 bcachefs (0ca38fe8-0a26-41f9-9b5d-6a27796c7803): /fiotest offset 86048768: no device to read from: 00255 u64s 8 type extent 4098:168192:U32_MAX len 128 ver 0: durability: 0 crc: c_size 128 size 128 offset 0 nonce 0 csum crc32c 0:8040a368 compress none ec: idx 83 block 1 ptr: 0:302:128 gen 0 00255 bcachefs (0ca38fe8-0a26-41f9-9b5d-6a27796c7803): /fiotest offset 85983232: no device to read from: 00255 u64s 8 type extent 4098:168064:U32_MAX len 128 ver 0: durability: 0 crc: c_size 128 size 128 offset 0 nonce 0 csum crc32c 0:43311336 compress none ec: idx 83 block 1 ptr: 0:302:0 gen 0 00255 Modules linked in: 00255 CPU: 5 UID: 0 PID: 304 Comm: kworker/u70:2 Not tainted 6.14.0-rc6-ktest-g526aae23d67d #16040 00255 Hardware name: linux,dummy-virt (DT) 00255 Workqueue: events_unbound bch2_rbio_retry 00255 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 00255 pc : __bch2_trans_get+0x100/0x378 00255 lr : __bch2_trans_get+0xa0/0x378 00255 sp : ffffff80c865b760 00255 x29: ffffff80c865b760 x28: 0000000000000000 x27: ffffff80d76ed880 00255 x26: 0000000000000018 x25: 0000000000000000 x24: ffffff80f4ec3760 00255 x23: ffffff80f4010140 x22: 0000000000000056 x21: ffffff80f4ec0000 00255 x20: ffffff80f4ec3788 x19: ffffff80d75f8000 x18: 00000000ffffffff 00255 x17: 2065707974203820 x16: 7334367520200a3a x15: 0000000000000008 00255 x14: 0000000000000001 x13: 0000000000000100 x12: 0000000000000006 00255 x11: ffffffc080b47a40 x10: 0000000000000000 x9 : ffffffc08038dea8 00255 x8 : ffffff80d75fc018 x7 : 0000000000000000 x6 : 0000000000003788 00255 x5 : 0000000000003760 x4 : ffffff80c922de80 x3 : ffffff80f18f0000 00255 x2 : ffffff80c922de80 x1 : 0000000000000130 x0 : 0000000000000006 00255 Call trace: 00255 __bch2_trans_get+0x100/0x378 (P) 00255 bch2_read_io_err+0x98/0x260 00255 bch2_read_endio+0xb8/0x2d0 00255 __bch2_read_extent+0xce8/0xfe0 00255 __bch2_read+0x2a8/0x978 00255 bch2_rbio_retry+0x188/0x318 00255 process_one_work+0x154/0x390 00255 worker_thread+0x20c/0x3b8 00255 kthread+0xf0/0x1b0 00255 ret_from_fork+0x10/0x20 00255 Code: 6b01001f 54ffff01 79408460 3617fec0 (d4210000) 00255 ---[ end trace 0000000000000000 ]--- 00255 Kernel panic - not syncing: Oops - BUG: Fatal exception 00255 SMP: stopping secondary CPUs 00255 Kernel Offset: disabled 00255 CPU features: 0x000,00000070,00000010,8240500b 00255 Memory Limit: none 00255 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]--- Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-03-11bcachefs: Initialize from_inode members for bch_io_optsRoxana Nicolescu
When there is no inode source, all "from_inode" members in the structure bhc_io_opts should be set false. Fixes: 7a7c43a0c1ecf ("bcachefs: Add bch_io_opts fields for indicating whether the opts came from the inode") Reported-by: syzbot+c17ad4b4367b72a853cb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c17ad4b4367b72a853cb Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-03-11qlcnic: fix memory leak issues in qlcnic_sriov_common.cHaoxiang Li
Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if any sriov_vlans fails to be allocated. Add qlcnic_sriov_free_vlans() to free the memory allocated by qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to be allocated. Fixes: 91b7282b613d ("qlcnic: Support VLAN id config.") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Link: https://patch.msgid.link/20250307094952.14874-1-haoxiang_li2024@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11ASoC: codecs: wm0010: Fix error handling path in wm0010_spi_probe()Christophe JAILLET
Free some resources in the error handling path of the probe, as already done in the remove function. Fixes: e3523e01869d ("ASoC: wm0010: Add initial wm0010 DSP driver") Fixes: fd8b96574456 ("ASoC: wm0010: Clear IRQ as wake source and include missing header") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/5139ba1ab8c4c157ce04e56096a0f54a1683195c.1741549792.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-11nvme: move error logging from nvme_end_req() to __nvme_end_req()Shin'ichiro Kawasaki
Before the Commit 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions"), blk_mq_add_to_batch() did not add failed passthrough requests to batch, and returned false. After the commit, blk_mq_add_to_batch() always adds passthrough requests to batch regardless of whether the request failed or not, and returns true. This affected error logging feature in the NVME driver. Before the commit, the call chain of failed passthrough request was as follows: nvme_handle_cqe() blk_mq_add_to_batch() .. false is returned, then call nvme_pci_complete_rq() nvme_pci_complete_rq() nvme_complete_rq() nvme_end_req() nvme_log_err_passthru() .. error logging __nvme_end_req() .. end of the rqeuest After the commit, the call chain is as follows: nvme_handle_cqe() blk_mq_add_to_batch() .. true is returned, then set nvme_pci_complete_batch() .. nvme_pci_complete_batch() nvme_complete_batch() nvme_complete_batch_req() __nvme_end_req() .. end of the request, without error logging To make the error logging feature work again for passthrough requests, move the nvme_log_err_passthru() call from nvme_end_req() to __nvme_end_req(). While at it, move nvme_log_error() call for non-passthrough requests together with nvme_log_err_passthru(). Even though the trigger commit does not affect non-passthrough requests, move it together for code simplicity. Fixes: 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250311104359.1767728-2-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-11bcachefs: Fix b->written overflowAlan Huang
When bset past end of btree node, we should not add sectors to b->written, which will overflow b->written. Reported-by: syzbot+3cb3d9e8c3f197754825@syzkaller.appspotmail.com Tested-by: syzbot+3cb3d9e8c3f197754825@syzkaller.appspotmail.com Signed-off-by: Alan Huang <mmpgouride@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-03-11docs: netdev: add a note on selftest postingJakub Kicinski
We haven't had much discussion on the list about this, but a handful of people have been confused about rules on posting selftests for fixes, lately. I tend to post fixes with their respective selftests in the same series. There are tradeoffs around size of the net tree and conflicts but so far it hasn't been a major issue. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250306180533.1864075-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11rtase: Fix improper release of ring list entries in rtase_sw_resetJustin Lai
Since rtase_init_ring, which is called within rtase_sw_reset, adds ring entries already present in the ring list back into the list, it causes the ring list to form a cycle. This results in list_for_each_entry_safe failing to find an endpoint during traversal, leading to an error. Therefore, it is necessary to remove the previously added ring_list nodes before calling rtase_init_ring. Fixes: 079600489960 ("rtase: Implement net_device_ops") Signed-off-by: Justin Lai <justinlai0215@realtek.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306070510.18129-1-justinlai0215@realtek.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11Merge branch 'bonding-fix-incorrect-mac-address-setting'Paolo Abeni
Hangbin Liu says: ==================== bonding: fix incorrect mac address setting The mac address on backup slave should be convert from Solicited-Node Multicast address, not from bonding unicast target address. ==================== Link: https://patch.msgid.link/20250306023923.38777-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11selftests: bonding: fix incorrect mac addressHangbin Liu
The correct mac address for NS target 2001:db8::254 is 33:33:ff:00:02:54, not 33:33:00:00:02:54. The same with client maddress. Fixes: 86fb6173d11e ("selftests: bonding: add ns multicast group testing") Acked-by: Jay Vosburgh <jv@jvosburgh.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306023923.38777-3-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11bonding: fix incorrect MAC address setting to receive NS messagesHangbin Liu
When validation on the backup slave is enabled, we need to validate the Neighbor Solicitation (NS) messages received on the backup slave. To receive these messages, the correct destination MAC address must be added to the slave. However, the target in bonding is a unicast address, which we cannot use directly. Instead, we should first convert it to a Solicited-Node Multicast Address and then derive the corresponding MAC address. Fix the incorrect MAC address setting on both slave_set_ns_maddr() and slave_set_ns_maddrs(). Since the two function names are similar. Add some description for the functions. Also only use one mac_addr variable in slave_set_ns_maddr() to save some code and logic. Fixes: 8eb36164d1a6 ("bonding: add ns target multicast address to slave device") Acked-by: Jay Vosburgh <jv@jvosburgh.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306023923.38777-2-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11net: mctp: unshare packets when reassemblingMatt Johnston
Ensure that the frag_list used for reassembly isn't shared with other packets. This avoids incorrect reassembly when packets are cloned, and prevents a memory leak due to circular references between fragments and their skb_shared_info. The upcoming MCTP-over-USB driver uses skb_clone which can trigger the problem - other MCTP drivers don't share SKBs. A kunit test is added to reproduce the issue. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Fixes: 4a992bbd3650 ("mctp: Implement message fragmentation & reassembly") Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306-matt-mctp-usb-v1-1-085502b3dd28@codeconstruct.com.au Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11vboxsf: Add __nonstring annotations for unterminated stringsKees Cook
When a character array without a terminating NUL character has a static initializer, GCC 15's -Wunterminated-string-initialization will only warn if the array lacks the "nonstring" attribute[1]. Mark the arrays with __nonstring to and correctly identify the char array as "not a C string" and thereby eliminate the warning. This effectively reverts the change in 4e7487245abc ("vboxsf: fix building with GCC 15"), to add the annotation that has other uses (i.e. warning if the string is ever used with C string APIs). Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1] Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brahmajit Das <brahmajit.xyz@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20250310222530.work.374-kees@kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-03-11Fix mmu notifiers for range-based invalidatesPiotr Jaroszynski
Update the __flush_tlb_range_op macro not to modify its parameters as these are unexepcted semantics. In practice, this fixes the call to mmu_notifier_arch_invalidate_secondary_tlbs() in __flush_tlb_range_nosync() to use the correct range instead of an empty range with start=end. The empty range was (un)lucky as it results in taking the invalidate-all path that doesn't cause correctness issues, but can certainly result in suboptimal perf. This has been broken since commit 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when invalidating TLBs") when the call to the notifiers was added to __flush_tlb_range(). It predates the addition of the __flush_tlb_range_op() macro from commit 360839027a6e ("arm64: tlb: Refactor the core flush algorithm of __flush_tlb_range") that made the bug hard to spot. Fixes: 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when invalidating TLBs") Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Raghavendra Rao Ananta <rananta@google.com> Cc: SeongJae Park <sj@kernel.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Nicolin Chen <nicolinc@nvidia.com> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux.dev Cc: linux-mm@kvack.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/r/20250304085127.2238030-1-pjaroszynski@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2025-03-11arm64: mm: Populate vmemmap at the page level if not section alignedZhenhua Huang
On the arm64 platform with 4K base page config, SECTION_SIZE_BITS is set to 27, making one section 128M. The related page struct which vmemmap points to is 2M then. Commit c1cc1552616d ("arm64: MMU initialisation") optimizes the vmemmap to populate at the PMD section level which was suitable initially since hot plug granule is always one section(128M). However, commit ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug") introduced a 2M(SUBSECTION_SIZE) hot plug granule, which disrupted the existing arm64 assumptions. The first problem is that if start or end is not aligned to a section boundary, such as when a subsection is hot added, populating the entire section is wasteful. The next problem is if we hotplug something that spans part of 128 MiB section (subsections, let's call it memblock1), and then hotplug something that spans another part of a 128 MiB section(subsections, let's call it memblock2), and subsequently unplug memblock1, vmemmap_free() will clear the entire PMD entry which also supports memblock2 even though memblock2 is still active. Assuming hotplug/unplug sizes are guaranteed to be symmetric. Do the fix similar to x86-64: populate to pages levels if start/end is not aligned with section boundary. Cc: stable@vger.kernel.org # v5.4+ Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug") Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250304072700.3405036-1-quic_zhenhuah@quicinc.com Signed-off-by: Will Deacon <will@kernel.org>
2025-03-11net: switchdev: Convert blocking notification chain to a raw oneAmit Cohen
A blocking notification chain uses a read-write semaphore to protect the integrity of the chain. The semaphore is acquired for writing when adding / removing notifiers to / from the chain and acquired for reading when traversing the chain and informing notifiers about an event. In case of the blocking switchdev notification chain, recursive notifications are possible which leads to the semaphore being acquired twice for reading and to lockdep warnings being generated [1]. Specifically, this can happen when the bridge driver processes a SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications about deferred events when calling switchdev_deferred_process(). Fix this by converting the notification chain to a raw notification chain in a similar fashion to the netdev notification chain. Protect the chain using the RTNL mutex by acquiring it when modifying the chain. Events are always informed under the RTNL mutex, but add an assertion in call_switchdev_blocking_notifiers() to make sure this is not violated in the future. Maintain the "blocking" prefix as events are always emitted from process context and listeners are allowed to block. [1]: WARNING: possible recursive locking detected 6.14.0-rc4-custom-g079270089484 #1 Not tainted -------------------------------------------- ip/52731 is trying to acquire lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 but task is already holding lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((switchdev_blocking_notif_chain).rwsem); lock((switchdev_blocking_notif_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by ip/52731: #0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0 #1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0 #2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 stack backtrace: ... ? __pfx_down_read+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 ? __pfx_switchdev_port_attr_set_deferred+0x10/0x10 blocking_notifier_call_chain+0x58/0xa0 switchdev_port_attr_notify.constprop.0+0xb3/0x1b0 ? __pfx_switchdev_port_attr_notify.constprop.0+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? switchdev_deferred_process+0x11a/0x340 switchdev_port_attr_set_deferred+0x27/0xd0 switchdev_deferred_process+0x164/0x340 br_switchdev_port_unoffload+0xc8/0x100 [bridge] br_switchdev_blocking_event+0x29f/0x580 [bridge] notifier_call_chain+0xa2/0x440 blocking_notifier_call_chain+0x6e/0xa0 switchdev_bridge_port_unoffload+0xde/0x1a0 ... Fixes: f7a70d650b0b6 ("net: bridge: switchdev: Ensure deferred event delivery on unoffload") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250305121509.631207-1-amcohen@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11Merge branch 'net-ti-icssg-prueth-add-native-mode-xdp-support'Paolo Abeni
Meghana Malladi says: ==================== net: ti: icssg-prueth: Add native mode XDP support This series adds native XDP support using page_pool. XDP zero copy support is not included in this patch series. Patch 1/3: Replaces skb with page pool for Rx buffer allocation Patch 2/3: Adds prueth_swdata struct for SWDATA for all swdata cases Patch 3/3: Introduces native mode XDP support v3: https://lore.kernel.org/all/20250224110102.1528552-1-m-malladi@ti.com/ ==================== Link: https://patch.msgid.link/20250305101422.1908370-1-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11net: ti: icssg-prueth: Add XDP supportRoger Quadros
Add native XDP support. We do not support zero copy yet. Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Meghana Malladi <m-malladi@ti.com> Link: https://patch.msgid.link/20250305101422.1908370-4-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11net: ti: icssg-prueth: introduce and use prueth_swdata struct for SWDATARoger Quadros
We have different cases for SWDATA (skb, page, cmd, etc) so it is better to have a dedicated data structure for that. We can embed the type field inside the struct and use it to interpret the data in completion handlers. Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Meghana Malladi <m-malladi@ti.com> Link: https://patch.msgid.link/20250305101422.1908370-3-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11net: ti: icssg-prueth: Use page_pool API for RX buffer allocationRoger Quadros
This is to prepare for native XDP support. The page pool API is more faster in allocating pages than __alloc_skb(). Drawback is that it works at PAGE_SIZE granularity so we are not efficient in memory usage. i.e. we are using PAGE_SIZE (4KB) memory for 1.5KB max packet size. Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Meghana Malladi <m-malladi@ti.com> Link: https://patch.msgid.link/20250305101422.1908370-2-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11drm/dp_mst: Fix locking when skipping CSN before topology probingImre Deak
The handling of the MST Connection Status Notify message is skipped if the probing of the topology is still pending. Acquiring the drm_dp_mst_topology_mgr::probe_lock for this in drm_dp_mst_handle_up_req() is problematic: the task/work this function is called from is also responsible for handling MST down-request replies (in drm_dp_mst_handle_down_rep()). Thus drm_dp_mst_link_probe_work() - holding already probe_lock - could be blocked waiting for an MST down-request reply while drm_dp_mst_handle_up_req() is waiting for probe_lock while processing a CSN message. This leads to the probe work's down-request message timing out. A scenario similar to the above leading to a down-request timeout is handling a CSN message in drm_dp_mst_handle_conn_stat(), holding the probe_lock and sending down-request messages while a second CSN message sent by the sink subsequently is handled by drm_dp_mst_handle_up_req(). Fix the above by moving the logic to skip the CSN handling to drm_dp_mst_process_up_req(). This function is called from a work (separate from the task/work handling new up/down messages), already holding probe_lock. This solves the above timeout issue, since handling of down-request replies won't be blocked by probe_lock. Fixes: ddf983488c3e ("drm/dp_mst: Skip CSN if topology probing is not done yet") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org # v6.6+ Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307183152.3822170-1-imre.deak@intel.com
2025-03-11Merge branch 'enic-enable-32-64-byte-cqes-and-get-max-rx-tx-ring-size-from-hw'Paolo Abeni
Satish Kharat via says: ==================== enic: enable 32, 64 byte cqes and get max rx/tx ring size from hw This series enables using the max rx and tx ring sizes read from hw. For newer hw that can be up to 16k entries. This requires bigger completion entries for rx queues. This series enables the use of the 32 and 64 byte completion queues entries for enic rx queues on supported hw versions. This is in addition to the exiting (default) 16 byte rx cqes. Signed-off-by: Satish Kharat <satishkh@cisco.com> ==================== Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-0-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: get max rq & wq entries supported by hw, 16K queuesSatish Kharat
Enables reading the max rq and wq entries supported from the hw. Enables 16k rq and wq entries on hw that supports. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-8-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: cleanup of enic wq request completion pathSatish Kharat
Cleans up the enic wq request completion path needed for 16k wq size support. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-7-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: added enic_wq.c and enic_wq.hSatish Kharat
Moves wq related function to enic_wq.c. Prepares for a cleaup of enic wq code path. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-6-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: remove unused function cq_enet_wq_desc_decSatish Kharat
Removes cq_enet_wq_desc_dec, not needed anymore. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-5-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: enable rq extended cq supportSatish Kharat
Enables getting from hw all the supported rq cq sizes and uses the highest supported cq size. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-4-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: enic rq extended cq definesSatish Kharat
Adds the defines for 32 and 64 byte receive queue completion queue descriptors. Adds devcmd define to get rq cq descriptor size/s supported by hw. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-3-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: enic rq code reorgSatish Kharat
Separates enic rx path from generic vnic api. Removes some complexity of doign enic callbacks through vnic api in rx. This is in preparation for enabling enic extended cq which applies only to enic rx path. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-2-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: Move function from header file to c fileSatish Kharat
Moves cq_enet_rq_desc_dec from cq_enet_desc.h to enic_rq.c. This is in preparation for enic extended completion queue enabling. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-1-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-10Merge branch 'mptcp-pm-code-reorganisation'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: pm: code reorganisation Before this series, the PM code was dispersed in different places: - pm.c had common code for all PMs. - pm_netlink.c was initially only about the in-kernel PM, but ended up also getting exported common helpers, callbacks used by the different PMs, NL events for PM userspace daemon, etc. quite confusing. - pm_userspace.c had userspace PM only code, but it was using "specific" in-kernel PM helpers according to their names. To clarify the code, a reorganisation is suggested here, only by moving code around, and small helper renaming to avoid confusions: - pm_netlink.c now only contains common PM generic Netlink code: - PM events: this code was already there - shared helpers around Netlink code that were already there as well - shared Netlink commands code from pm.c - pm_kernel.c now contains only code that is specific to the in-kernel PM. Now all functions are either called from: - pm.c: events coming from the core, when this PM is being used - pm_netlink.c: for shared Netlink commands - mptcp_pm_gen.c: for Netlink commands specific to the in-kernel PM - sockopt.c: for the exported counters per netns - pm.c got many code from pm_netlink.c: - helpers used from both PMs and not linked to Netlink - callbacks used by different PMs, e.g. ADD_ADDR management - some helpers have been renamed to remove the '_nl' prefix, and some have been marked as 'static'. - protocol.h has been updated accordingly: - some helpers no longer need to be exported - new ones needed to be exported: they have been prefixed if needed. The code around the PM is now less confusing, which should help for the maintenance in the long term, and the introduction of a PM Ops. This will certainly impact future backports, but because other cleanups have already done recently, and more are coming to ease the addition of a new path-manager controlled with BPF (struct_ops), doing that now seems to be a good time. Also, many issues around the PM have been fixed a few months ago while increasing the code coverage in the selftests, so such big reorganisation can be done with more confidence now. Note that checkpatch, when used with --max-line-length=80, will complain about lines being over the 80 limits, but these warnings were already there before moving the code around. Also, patch 1 is not directly related to the code reorganisation, but it was a remaining cleanup that we didn't upstream before, because it was conflicting with another patch that has been sent for inclusion to the net tree. ==================== Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-0-abef20ada03b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10mptcp: pm: move Netlink PM helpers to pm_netlink.cMatthieu Baerts (NGI0)
Before this patch, the PM code was dispersed in different places: - pm.c had common code for all PMs, but also Netlink specific code that will not be needed with the future BPF path-managers. - pm_netlink.c had common Netlink code. To clarify the code, a reorganisation is suggested here, only by moving code around, and small helper renaming to avoid confusions: - pm_netlink.c now only contains common PM Netlink code: - PM events: this code was already there - shared helpers around Netlink code that were already there as well - shared Netlink commands code from pm.c - pm.c now no longer contain Netlink specific code. - protocol.h has been updated accordingly: - mptcp_nl_fill_addr() no longer need to be exported. The code around the PM is now less confusing, which should help for the maintenance in the long term. This will certainly impact future backports, but because other cleanups have already done recently, and more are coming to ease the addition of a new path-manager controlled with BPF (struct_ops), doing that now seems to be a good time. Also, many issues around the PM have been fixed a few months ago while increasing the code coverage in the selftests, so such big reorganisation can be done with more confidence now. No behavioural changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-15-abef20ada03b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10mptcp: pm: split in-kernel PM specific codeMatthieu Baerts (NGI0)
Before this patch, the PM code was dispersed in different places: - pm.c had common code for all PMs - pm_netlink.c was supposed to be about the in-kernel PM, but also had exported common Netlink helpers, NL events for PM userspace daemons, etc. quite confusing. To clarify the code, a reorganisation is suggested here, only by moving code around to avoid confusions: - pm_netlink.c now only contains common PM Netlink code: - PM events: this code was already there - shared helpers around Netlink code that were already there as well - more shared Netlink commands code from pm.c will come after - pm_kernel.c now contains only code that is specific to the in-kernel PM. Now all functions are either called from: - pm.c: events coming from the core, when this PM is being used - pm_netlink.c: for shared Netlink commands - mptcp_pm_gen.c: for Netlink commands specific to the in-kernel PM - sockopt.c: for the exported counters per netns - (while at it, a useless 'return;' spot by checkpatch at the end of mptcp_pm_nl_set_flags_all, has been removed) The code around the PM is now less confusing, which should help for the maintenance in the long term. This will certainly impact future backports, but because other cleanups have already done recently, and more are coming to ease the addition of a new path-manager controlled with BPF (struct_ops), doing that now seems to be a good time. Also, many issues around the PM have been fixed a few months ago while increasing the code coverage in the selftests, so such big reorganisation can be done with more confidence now. No behavioural changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-14-abef20ada03b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 15:46:15 +0000